Debian Codegraph @

arch/arm/boot/dts/renesas/r8a7793-gose.dts

raw
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Device Tree Source for the Gose board
4 *
5 * Copyright (C) 2014-2015 Renesas Electronics Corporation
6 */
7
8 /*
9 * SSI-AK4643
10 *
11 * SW1: 1: AK4643
12 * 2: CN22
13 * 3: ADV7511
14 *
15 * This command is required when Playback/Capture
16 *
17 * amixer set "LINEOUT Mixer DACL" on
18 * amixer set "DVC Out" 100%
19 * amixer set "DVC In" 100%
20 *
21 * You can use Mute
22 *
23 * amixer set "DVC Out Mute" on
24 * amixer set "DVC In Mute" on
25 *
26 * You can use Volume Ramp
27 *
28 * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
29 * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
30 * amixer set "DVC Out Ramp" on
31 * aplay xxx.wav &
32 * amixer set "DVC Out" 80% // Volume Down
33 * amixer set "DVC Out" 100% // Volume Up
34 */
35
36 /dts-v1/;
37 #include "r8a7793.dtsi"
38 #include <dt-bindings/gpio/gpio.h>
39 #include <dt-bindings/input/input.h>
40
41 / {
42 model = "Gose";
43 compatible = "renesas,gose", "renesas,r8a7793";
44
45 aliases {
46 serial0 = &scif0;
47 serial1 = &scif1;
48 i2c9 = &gpioi2c2;
49 i2c10 = &gpioi2c4;
50 i2c11 = &i2chdmi;
51 i2c12 = &i2cexio4;
52 mmc0 = &sdhi0;
53 mmc1 = &sdhi1;
54 mmc2 = &sdhi2;
55 };
56
57 chosen {
58 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
59 stdout-path = "serial0:115200n8";
60 };
61
62 memory@40000000 {
63 device_type = "memory";
64 reg = <0 0x40000000 0 0x40000000>;
65 };
66
67 keyboard {
68 compatible = "gpio-keys";
69
70 pinctrl-0 = <&keyboard_pins>;
71 pinctrl-names = "default";
72
73 key-1 {
74 gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
75 linux,code = <KEY_1>;
76 label = "SW2-1";
77 wakeup-source;
78 debounce-interval = <20>;
79 };
80 key-2 {
81 gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_2>;
83 label = "SW2-2";
84 wakeup-source;
85 debounce-interval = <20>;
86 };
87 key-3 {
88 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
89 linux,code = <KEY_3>;
90 label = "SW2-3";
91 wakeup-source;
92 debounce-interval = <20>;
93 };
94 key-4 {
95 gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
96 linux,code = <KEY_4>;
97 label = "SW2-4";
98 wakeup-source;
99 debounce-interval = <20>;
100 };
101 key-a {
102 gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
103 linux,code = <KEY_A>;
104 label = "SW30";
105 wakeup-source;
106 debounce-interval = <20>;
107 };
108 key-b {
109 gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
110 linux,code = <KEY_B>;
111 label = "SW31";
112 wakeup-source;
113 debounce-interval = <20>;
114 };
115 key-c {
116 gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
117 linux,code = <KEY_C>;
118 label = "SW32";
119 wakeup-source;
120 debounce-interval = <20>;
121 };
122 key-d {
123 gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
124 linux,code = <KEY_D>;
125 label = "SW33";
126 wakeup-source;
127 debounce-interval = <20>;
128 };
129 key-e {
130 gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
131 linux,code = <KEY_E>;
132 label = "SW34";
133 wakeup-source;
134 debounce-interval = <20>;
135 };
136 key-f {
137 gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
138 linux,code = <KEY_F>;
139 label = "SW35";
140 wakeup-source;
141 debounce-interval = <20>;
142 };
143 key-g {
144 gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
145 linux,code = <KEY_G>;
146 label = "SW36";
147 wakeup-source;
148 debounce-interval = <20>;
149 };
150 };
151
152 leds {
153 compatible = "gpio-leds";
154 led6 {
155 gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
156 label = "LED6";
157 };
158 led7 {
159 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
160 label = "LED7";
161 };
162 led8 {
163 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
164 label = "LED8";
165 };
166 };
167
168 reg_1p8v: regulator-1v8 {
169 compatible = "regulator-fixed";
170 regulator-name = "fixed-1.8V";
171 regulator-min-microvolt = <1800000>;
172 regulator-max-microvolt = <1800000>;
173 regulator-boot-on;
174 regulator-always-on;
175 };
176
177 reg_3p3v: regulator-3v3 {
178 compatible = "regulator-fixed";
179 regulator-name = "fixed-3.3V";
180 regulator-min-microvolt = <3300000>;
181 regulator-max-microvolt = <3300000>;
182 regulator-boot-on;
183 regulator-always-on;
184 };
185
186 vcc_sdhi0: regulator-vcc-sdhi0 {
187 compatible = "regulator-fixed";
188
189 regulator-name = "SDHI0 Vcc";
190 regulator-min-microvolt = <3300000>;
191 regulator-max-microvolt = <3300000>;
192
193 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
194 enable-active-high;
195 };
196
197 vccq_sdhi0: regulator-vccq-sdhi0 {
198 compatible = "regulator-gpio";
199
200 regulator-name = "SDHI0 VccQ";
201 regulator-min-microvolt = <1800000>;
202 regulator-max-microvolt = <3300000>;
203
204 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
205 gpios-states = <1>;
206 states = <3300000 1>, <1800000 0>;
207 };
208
209 vcc_sdhi1: regulator-vcc-sdhi1 {
210 compatible = "regulator-fixed";
211
212 regulator-name = "SDHI1 Vcc";
213 regulator-min-microvolt = <3300000>;
214 regulator-max-microvolt = <3300000>;
215
216 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
217 enable-active-high;
218 };
219
220 vccq_sdhi1: regulator-vccq-sdhi1 {
221 compatible = "regulator-gpio";
222
223 regulator-name = "SDHI1 VccQ";
224 regulator-min-microvolt = <1800000>;
225 regulator-max-microvolt = <3300000>;
226
227 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
228 gpios-states = <1>;
229 states = <3300000 1>, <1800000 0>;
230 };
231
232 vcc_sdhi2: regulator-vcc-sdhi2 {
233 compatible = "regulator-fixed";
234
235 regulator-name = "SDHI2 Vcc";
236 regulator-min-microvolt = <3300000>;
237 regulator-max-microvolt = <3300000>;
238
239 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
240 enable-active-high;
241 };
242
243 vccq_sdhi2: regulator-vccq-sdhi2 {
244 compatible = "regulator-gpio";
245
246 regulator-name = "SDHI2 VccQ";
247 regulator-min-microvolt = <1800000>;
248 regulator-max-microvolt = <3300000>;
249
250 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
251 gpios-states = <1>;
252 states = <3300000 1>, <1800000 0>;
253 };
254
255 audio_clock: audio_clock {
256 compatible = "fixed-clock";
257 #clock-cells = <0>;
258 clock-frequency = <11289600>;
259 };
260
261 rsnd_ak4643: sound {
262 compatible = "simple-audio-card";
263
264 simple-audio-card,format = "left_j";
265 simple-audio-card,bitclock-master = <&sndcodec>;
266 simple-audio-card,frame-master = <&sndcodec>;
267
268 sndcpu: simple-audio-card,cpu {
269 sound-dai = <&rcar_sound>;
270 };
271
272 sndcodec: simple-audio-card,codec {
273 sound-dai = <&ak4643>;
274 clocks = <&audio_clock>;
275 };
276 };
277
278 hdmi-in {
279 compatible = "hdmi-connector";
280 type = "a";
281
282 port {
283 hdmi_con_in: endpoint {
284 remote-endpoint = <&adv7612_in>;
285 };
286 };
287 };
288
289 hdmi-out {
290 compatible = "hdmi-connector";
291 type = "a";
292
293 port {
294 hdmi_con_out: endpoint {
295 remote-endpoint = <&adv7511_out>;
296 };
297 };
298 };
299
300 composite-in {
301 compatible = "composite-video-connector";
302
303 port {
304 composite_con_in: endpoint {
305 remote-endpoint = <&adv7180_in>;
306 };
307 };
308 };
309
310 x2_clk: x2-clock {
311 compatible = "fixed-clock";
312 #clock-cells = <0>;
313 clock-frequency = <74250000>;
314 };
315
316 x13_clk: x13-clock {
317 compatible = "fixed-clock";
318 #clock-cells = <0>;
319 clock-frequency = <148500000>;
320 };
321
322 gpioi2c2: i2c-9 {
323 #address-cells = <1>;
324 #size-cells = <0>;
325 compatible = "i2c-gpio";
326 status = "disabled";
327 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
328 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
329 i2c-gpio,delay-us = <5>;
330 };
331
332 gpioi2c4: i2c-10 {
333 #address-cells = <1>;
334 #size-cells = <0>;
335 compatible = "i2c-gpio";
336 status = "disabled";
337 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
338 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
339 i2c-gpio,delay-us = <5>;
340 };
341
342 /*
343 * A fallback to GPIO is provided for I2C2.
344 */
345 i2chdmi: i2c-mux1 {
346 compatible = "i2c-demux-pinctrl";
347 i2c-parent = <&i2c2>, <&gpioi2c2>;
348 i2c-bus-name = "i2c-hdmi";
349 #address-cells = <1>;
350 #size-cells = <0>;
351
352 ak4643: codec@12 {
353 compatible = "asahi-kasei,ak4643";
354 #sound-dai-cells = <0>;
355 reg = <0x12>;
356 };
357
358 composite-in@20 {
359 compatible = "adi,adv7180cp";
360 reg = <0x20>;
361
362 ports {
363 #address-cells = <1>;
364 #size-cells = <0>;
365
366 port@0 {
367 reg = <0>;
368 adv7180_in: endpoint {
369 remote-endpoint = <&composite_con_in>;
370 };
371 };
372
373 port@3 {
374 reg = <3>;
375 adv7180_out: endpoint {
376 remote-endpoint = <&vin1ep>;
377 };
378 };
379 };
380 };
381
382 hdmi@39 {
383 compatible = "adi,adv7511w";
384 reg = <0x39>;
385 interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>;
386
387 avdd-supply = <&reg_1p8v>;
388 dvdd-supply = <&reg_1p8v>;
389 pvdd-supply = <&reg_1p8v>;
390 dvdd-3v-supply = <&reg_3p3v>;
391 bgvdd-supply = <&reg_1p8v>;
392
393 adi,input-depth = <8>;
394 adi,input-colorspace = "rgb";
395 adi,input-clock = "1x";
396
397 ports {
398 #address-cells = <1>;
399 #size-cells = <0>;
400
401 port@0 {
402 reg = <0>;
403 adv7511_in: endpoint {
404 remote-endpoint = <&du_out_rgb>;
405 };
406 };
407
408 port@1 {
409 reg = <1>;
410 adv7511_out: endpoint {
411 remote-endpoint = <&hdmi_con_out>;
412 };
413 };
414 };
415 };
416
417 hdmi-in@4c {
418 compatible = "adi,adv7612";
419 reg = <0x4c>;
420 interrupts-extended = <&gpio4 2 IRQ_TYPE_LEVEL_LOW>;
421 default-input = <0>;
422
423 ports {
424 #address-cells = <1>;
425 #size-cells = <0>;
426
427 port@0 {
428 reg = <0>;
429 adv7612_in: endpoint {
430 remote-endpoint = <&hdmi_con_in>;
431 };
432 };
433
434 port@2 {
435 reg = <2>;
436 adv7612_out: endpoint {
437 remote-endpoint = <&vin0ep2>;
438 };
439 };
440 };
441 };
442
443 eeprom@50 {
444 compatible = "renesas,r1ex24002", "atmel,24c02";
445 reg = <0x50>;
446 pagesize = <16>;
447 };
448 };
449
450 /*
451 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
452 * A fallback to GPIO is provided.
453 */
454 i2cexio4: i2c-mux2 {
455 compatible = "i2c-demux-pinctrl";
456 i2c-parent = <&i2c4>, <&gpioi2c4>;
457 i2c-bus-name = "i2c-exio4";
458 #address-cells = <1>;
459 #size-cells = <0>;
460 };
461 };
462
463 &du {
464 pinctrl-0 = <&du_pins>;
465 pinctrl-names = "default";
466 status = "okay";
467
468 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
469 <&x13_clk>, <&x2_clk>;
470 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
471
472 ports {
473 port@0 {
474 endpoint {
475 remote-endpoint = <&adv7511_in>;
476 };
477 };
478 };
479 };
480
481 &lvds0 {
482 ports {
483 port@1 {
484 lvds_connector: endpoint {
485 };
486 };
487 };
488 };
489
490 &extal_clk {
491 clock-frequency = <20000000>;
492 };
493
494 &pfc {
495 pinctrl-0 = <&scif_clk_pins>;
496 pinctrl-names = "default";
497
498 i2c2_pins: i2c2 {
499 groups = "i2c2";
500 function = "i2c2";
501 };
502
503 i2c4_pins: i2c4 {
504 groups = "i2c4_c";
505 function = "i2c4";
506 };
507
508 du_pins: du {
509 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
510 function = "du";
511 };
512
513 scif0_pins: scif0 {
514 groups = "scif0_data_d";
515 function = "scif0";
516 };
517
518 scif1_pins: scif1 {
519 groups = "scif1_data_d";
520 function = "scif1";
521 };
522
523 scif_clk_pins: scif_clk {
524 groups = "scif_clk";
525 function = "scif_clk";
526 };
527
528 ether_pins: ether {
529 groups = "eth_link", "eth_mdio", "eth_rmii";
530 function = "eth";
531 };
532
533 phy1_pins: phy1 {
534 groups = "intc_irq0";
535 function = "intc";
536 };
537
538 pmic_irq_pins: pmicirq {
539 groups = "intc_irq2";
540 function = "intc";
541 };
542
543 sdhi0_pins: sd0 {
544 groups = "sdhi0_data4", "sdhi0_ctrl";
545 function = "sdhi0";
546 power-source = <3300>;
547 };
548
549 sdhi0_pins_uhs: sd0_uhs {
550 groups = "sdhi0_data4", "sdhi0_ctrl";
551 function = "sdhi0";
552 power-source = <1800>;
553 };
554
555 sdhi1_pins: sd1 {
556 groups = "sdhi1_data4", "sdhi1_ctrl";
557 function = "sdhi1";
558 power-source = <3300>;
559 };
560
561 sdhi1_pins_uhs: sd1_uhs {
562 groups = "sdhi1_data4", "sdhi1_ctrl";
563 function = "sdhi1";
564 power-source = <1800>;
565 };
566
567 sdhi2_pins: sd2 {
568 groups = "sdhi2_data4", "sdhi2_ctrl";
569 function = "sdhi2";
570 power-source = <3300>;
571 };
572
573 sdhi2_pins_uhs: sd2_uhs {
574 groups = "sdhi2_data4", "sdhi2_ctrl";
575 function = "sdhi2";
576 power-source = <1800>;
577 };
578
579 qspi_pins: qspi {
580 groups = "qspi_ctrl", "qspi_data4";
581 function = "qspi";
582 };
583
584 sound_pins: sound {
585 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
586 function = "ssi";
587 };
588
589 sound_clk_pins: sound_clk {
590 groups = "audio_clk_a";
591 function = "audio_clk";
592 };
593
594 keyboard_pins: keyboard {
595 pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
596 bias-pull-up;
597 };
598
599 vin0_pins: vin0 {
600 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
601 function = "vin0";
602 };
603
604 vin1_pins: vin1 {
605 groups = "vin1_data8", "vin1_clk";
606 function = "vin1";
607 };
608 };
609
610 &ether {
611 pinctrl-0 = <&ether_pins>, <&phy1_pins>;
612 pinctrl-names = "default";
613
614 phy-handle = <&phy1>;
615 renesas,ether-link-active-low;
616 status = "okay";
617
618 phy1: ethernet-phy@1 {
619 compatible = "ethernet-phy-id0022.1537",
620 "ethernet-phy-ieee802.3-c22";
621 reg = <1>;
622 interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>;
623 micrel,led-mode = <1>;
624 reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
625 };
626 };
627
628 &cmt0 {
629 status = "okay";
630 };
631
632 &cpu0 {
633 cpu0-supply = <&vdd_dvfs>;
634 };
635
636 &rwdt {
637 timeout-sec = <60>;
638 status = "okay";
639 };
640
641 &scif0 {
642 pinctrl-0 = <&scif0_pins>;
643 pinctrl-names = "default";
644 bootph-all;
645
646 status = "okay";
647 };
648
649 &scif1 {
650 pinctrl-0 = <&scif1_pins>;
651 pinctrl-names = "default";
652
653 status = "okay";
654 };
655
656 &scif_clk {
657 clock-frequency = <14745600>;
658 };
659
660 &sdhi0 {
661 pinctrl-0 = <&sdhi0_pins>;
662 pinctrl-1 = <&sdhi0_pins_uhs>;
663 pinctrl-names = "default", "state_uhs";
664
665 vmmc-supply = <&vcc_sdhi0>;
666 vqmmc-supply = <&vccq_sdhi0>;
667 cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
668 wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
669 sd-uhs-sdr50;
670 sd-uhs-sdr104;
671 status = "okay";
672 };
673
674 &sdhi1 {
675 pinctrl-0 = <&sdhi1_pins>;
676 pinctrl-1 = <&sdhi1_pins_uhs>;
677 pinctrl-names = "default", "state_uhs";
678
679 vmmc-supply = <&vcc_sdhi1>;
680 vqmmc-supply = <&vccq_sdhi1>;
681 cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
682 wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
683 sd-uhs-sdr50;
684 status = "okay";
685 };
686
687 &sdhi2 {
688 pinctrl-0 = <&sdhi2_pins>;
689 pinctrl-1 = <&sdhi2_pins_uhs>;
690 pinctrl-names = "default", "state_uhs";
691
692 vmmc-supply = <&vcc_sdhi2>;
693 vqmmc-supply = <&vccq_sdhi2>;
694 cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
695 sd-uhs-sdr50;
696 status = "okay";
697 };
698
699 &qspi {
700 pinctrl-0 = <&qspi_pins>;
701 pinctrl-names = "default";
702
703 status = "okay";
704
705 flash@0 {
706 compatible = "spansion,s25fl512s", "jedec,spi-nor";
707 reg = <0>;
708 spi-max-frequency = <30000000>;
709 spi-tx-bus-width = <4>;
710 spi-rx-bus-width = <4>;
711 spi-cpol;
712 spi-cpha;
713 m25p,fast-read;
714
715 partitions {
716 compatible = "fixed-partitions";
717 #address-cells = <1>;
718 #size-cells = <1>;
719
720 partition@0 {
721 label = "loader";
722 reg = <0x00000000 0x00040000>;
723 read-only;
724 };
725 partition@40000 {
726 label = "user";
727 reg = <0x00040000 0x00400000>;
728 read-only;
729 };
730 partition@440000 {
731 label = "flash";
732 reg = <0x00440000 0x03bc0000>;
733 };
734 };
735 };
736 };
737
738 &i2c2 {
739 pinctrl-0 = <&i2c2_pins>;
740 pinctrl-names = "i2c-hdmi";
741
742 status = "okay";
743 clock-frequency = <100000>;
744
745 };
746
747 &i2c6 {
748 pinctrl-names = "default";
749 pinctrl-0 = <&pmic_irq_pins>;
750 status = "okay";
751 clock-frequency = <100000>;
752
753 pmic@58 {
754 compatible = "dlg,da9063";
755 reg = <0x58>;
756 interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
757 interrupt-controller;
758 #interrupt-cells = <2>;
759
760 rtc {
761 compatible = "dlg,da9063-rtc";
762 };
763
764 watchdog {
765 compatible = "dlg,da9063-watchdog";
766 };
767 };
768
769 vdd_dvfs: regulator@68 {
770 compatible = "dlg,da9210";
771 reg = <0x68>;
772 interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
773
774 regulator-min-microvolt = <1000000>;
775 regulator-max-microvolt = <1000000>;
776 regulator-boot-on;
777 regulator-always-on;
778 };
779 };
780
781 &i2c4 {
782 pinctrl-0 = <&i2c4_pins>;
783 pinctrl-names = "i2c-exio4";
784 };
785
786 &rcar_sound {
787 pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
788 pinctrl-names = "default";
789
790 /* Single DAI */
791 #sound-dai-cells = <0>;
792
793 status = "okay";
794
795 rcar_sound,dai {
796 dai0 {
797 playback = <&ssi0>, <&src2>, <&dvc0>;
798 capture = <&ssi1>, <&src3>, <&dvc1>;
799 };
800 };
801 };
802
803 &ssi1 {
804 shared-pin;
805 };
806
807 /* HDMI video input */
808 &vin0 {
809 status = "okay";
810 pinctrl-0 = <&vin0_pins>;
811 pinctrl-names = "default";
812
813 port {
814 vin0ep2: endpoint {
815 remote-endpoint = <&adv7612_out>;
816 bus-width = <24>;
817 hsync-active = <0>;
818 vsync-active = <0>;
819 pclk-sample = <1>;
820 data-active = <1>;
821 };
822 };
823 };
824
825 /* composite video input */
826 &vin1 {
827 pinctrl-0 = <&vin1_pins>;
828 pinctrl-names = "default";
829
830 status = "okay";
831
832 port {
833 vin1ep: endpoint {
834 remote-endpoint = <&adv7180_out>;
835 bus-width = <8>;
836 };
837 };
838 };