| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree Source for the iWave-RZ/G1H Qseven board development |
| 4 |
* platform with camera daughter board |
| 5 |
* |
| 6 |
* Copyright (C) 2020 Renesas Electronics Corp. |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
|
| 11 |
#include <dt-bindings/media/video-interfaces.h> |
| 12 |
|
| 13 |
#include "r8a7742-iwg21d-q7.dts" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "iWave Systems RZ/G1H Qseven development platform with camera add-on"; |
| 17 |
compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
serial0 = &scif0; |
| 21 |
serial1 = &scif1; |
| 22 |
serial3 = &scifb1; |
| 23 |
serial5 = &hscif0; |
| 24 |
ethernet1 = ðer; |
| 25 |
}; |
| 26 |
|
| 27 |
mclk_cam1: mclk-cam1 { |
| 28 |
compatible = "fixed-clock"; |
| 29 |
#clock-cells = <0>; |
| 30 |
clock-frequency = <26000000>; |
| 31 |
}; |
| 32 |
|
| 33 |
mclk_cam2: mclk-cam2 { |
| 34 |
compatible = "fixed-clock"; |
| 35 |
#clock-cells = <0>; |
| 36 |
clock-frequency = <26000000>; |
| 37 |
}; |
| 38 |
|
| 39 |
mclk_cam3: mclk-cam3 { |
| 40 |
compatible = "fixed-clock"; |
| 41 |
#clock-cells = <0>; |
| 42 |
clock-frequency = <26000000>; |
| 43 |
}; |
| 44 |
|
| 45 |
mclk_cam4: mclk-cam4 { |
| 46 |
compatible = "fixed-clock"; |
| 47 |
#clock-cells = <0>; |
| 48 |
clock-frequency = <26000000>; |
| 49 |
}; |
| 50 |
|
| 51 |
reg_1p8v: 1p8v { |
| 52 |
compatible = "regulator-fixed"; |
| 53 |
regulator-name = "1P8V"; |
| 54 |
regulator-min-microvolt = <1800000>; |
| 55 |
regulator-max-microvolt = <1800000>; |
| 56 |
regulator-always-on; |
| 57 |
}; |
| 58 |
|
| 59 |
reg_2p8v: 2p8v { |
| 60 |
compatible = "regulator-fixed"; |
| 61 |
regulator-name = "2P8V"; |
| 62 |
regulator-min-microvolt = <2800000>; |
| 63 |
regulator-max-microvolt = <2800000>; |
| 64 |
regulator-always-on; |
| 65 |
}; |
| 66 |
}; |
| 67 |
|
| 68 |
&avb { |
| 69 |
/* Pins shared with VIN0, keep status disabled */ |
| 70 |
status = "disabled"; |
| 71 |
}; |
| 72 |
|
| 73 |
&can0 { |
| 74 |
pinctrl-0 = <&can0_pins>; |
| 75 |
pinctrl-names = "default"; |
| 76 |
status = "okay"; |
| 77 |
}; |
| 78 |
|
| 79 |
ðer { |
| 80 |
pinctrl-0 = <ðer_pins>; |
| 81 |
pinctrl-names = "default"; |
| 82 |
|
| 83 |
phy-handle = <&phy1>; |
| 84 |
renesas,ether-link-active-low; |
| 85 |
status = "okay"; |
| 86 |
|
| 87 |
phy1: ethernet-phy@1 { |
| 88 |
compatible = "ethernet-phy-id0022.1560", |
| 89 |
"ethernet-phy-ieee802.3-c22"; |
| 90 |
reg = <1>; |
| 91 |
micrel,led-mode = <1>; |
| 92 |
}; |
| 93 |
}; |
| 94 |
|
| 95 |
&gpio0 { |
| 96 |
/* Disable hogging GP0_18 to output LOW */ |
| 97 |
/delete-node/ qspi-en-hog; |
| 98 |
|
| 99 |
/* Hog GP0_18 to output HIGH to enable VIN2 */ |
| 100 |
vin2-en-hog { |
| 101 |
gpio-hog; |
| 102 |
gpios = <18 GPIO_ACTIVE_HIGH>; |
| 103 |
output-high; |
| 104 |
line-name = "VIN2_EN"; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
&hscif0 { |
| 109 |
pinctrl-0 = <&hscif0_pins>; |
| 110 |
pinctrl-names = "default"; |
| 111 |
uart-has-rtscts; |
| 112 |
status = "okay"; |
| 113 |
}; |
| 114 |
|
| 115 |
&i2c1 { |
| 116 |
pinctrl-0 = <&i2c1_pins>; |
| 117 |
pinctrl-names = "default"; |
| 118 |
|
| 119 |
/* status set to "okay" when needed by camera configuration below */ |
| 120 |
clock-frequency = <400000>; |
| 121 |
}; |
| 122 |
|
| 123 |
&i2c3 { |
| 124 |
pinctrl-0 = <&i2c3_pins>; |
| 125 |
pinctrl-names = "default"; |
| 126 |
|
| 127 |
/* status set to "okay" when needed by camera configuration below */ |
| 128 |
clock-frequency = <400000>; |
| 129 |
}; |
| 130 |
|
| 131 |
&pfc { |
| 132 |
can0_pins: can0 { |
| 133 |
groups = "can0_data_d"; |
| 134 |
function = "can0"; |
| 135 |
}; |
| 136 |
|
| 137 |
ether_pins: ether { |
| 138 |
groups = "eth_mdio", "eth_rmii"; |
| 139 |
function = "eth"; |
| 140 |
}; |
| 141 |
|
| 142 |
hscif0_pins: hscif0 { |
| 143 |
groups = "hscif0_data", "hscif0_ctrl"; |
| 144 |
function = "hscif0"; |
| 145 |
}; |
| 146 |
|
| 147 |
i2c1_pins: i2c1 { |
| 148 |
groups = "i2c1_c"; |
| 149 |
function = "i2c1"; |
| 150 |
}; |
| 151 |
|
| 152 |
i2c3_pins: i2c3 { |
| 153 |
groups = "i2c3"; |
| 154 |
function = "i2c3"; |
| 155 |
}; |
| 156 |
|
| 157 |
scif0_pins: scif0 { |
| 158 |
groups = "scif0_data"; |
| 159 |
function = "scif0"; |
| 160 |
}; |
| 161 |
|
| 162 |
scif1_pins: scif1 { |
| 163 |
groups = "scif1_data"; |
| 164 |
function = "scif1"; |
| 165 |
}; |
| 166 |
|
| 167 |
scifb1_pins: scifb1 { |
| 168 |
groups = "scifb1_data"; |
| 169 |
function = "scifb1"; |
| 170 |
}; |
| 171 |
|
| 172 |
vin0_8bit_pins: vin0 { |
| 173 |
groups = "vin0_data8", "vin0_clk", "vin0_sync"; |
| 174 |
function = "vin0"; |
| 175 |
}; |
| 176 |
|
| 177 |
vin1_8bit_pins: vin1 { |
| 178 |
groups = "vin1_data8_b", "vin1_clk_b", "vin1_sync_b"; |
| 179 |
function = "vin1"; |
| 180 |
}; |
| 181 |
|
| 182 |
vin2_pins: vin2 { |
| 183 |
groups = "vin2_g8", "vin2_clk"; |
| 184 |
function = "vin2"; |
| 185 |
}; |
| 186 |
|
| 187 |
vin3_pins: vin3 { |
| 188 |
groups = "vin3_data8", "vin3_clk", "vin3_sync"; |
| 189 |
function = "vin3"; |
| 190 |
}; |
| 191 |
}; |
| 192 |
|
| 193 |
&qspi { |
| 194 |
/* Pins shared with VIN2, keep status disabled */ |
| 195 |
status = "disabled"; |
| 196 |
}; |
| 197 |
|
| 198 |
&scif0 { |
| 199 |
pinctrl-0 = <&scif0_pins>; |
| 200 |
pinctrl-names = "default"; |
| 201 |
status = "okay"; |
| 202 |
}; |
| 203 |
|
| 204 |
&scif1 { |
| 205 |
pinctrl-0 = <&scif1_pins>; |
| 206 |
pinctrl-names = "default"; |
| 207 |
status = "okay"; |
| 208 |
}; |
| 209 |
|
| 210 |
&scifb1 { |
| 211 |
pinctrl-0 = <&scifb1_pins>; |
| 212 |
pinctrl-names = "default"; |
| 213 |
status = "okay"; |
| 214 |
|
| 215 |
rts-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; |
| 216 |
cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; |
| 217 |
}; |
| 218 |
|
| 219 |
/* |
| 220 |
* Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints |
| 221 |
* |
| 222 |
* (un)comment the #include statements to change configuration |
| 223 |
*/ |
| 224 |
|
| 225 |
/* 8bit CMOS Camera 1 (J13) */ |
| 226 |
#define CAM_PARENT_I2C i2c0 |
| 227 |
#define MCLK_CAM mclk_cam1 |
| 228 |
#define CAM_EP cam0ep |
| 229 |
#define VIN_EP vin0ep |
| 230 |
#undef CAM_ENABLED |
| 231 |
#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" |
| 232 |
//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" |
| 233 |
|
| 234 |
#ifdef CAM_ENABLED |
| 235 |
&vin0 { |
| 236 |
/* |
| 237 |
* Set SW2 switch on the SOM to 'ON' |
| 238 |
* Set SW1 switch on camera board to 'OFF' as we are using 8bit mode |
| 239 |
*/ |
| 240 |
status = "okay"; |
| 241 |
pinctrl-0 = <&vin0_8bit_pins>; |
| 242 |
pinctrl-names = "default"; |
| 243 |
|
| 244 |
port { |
| 245 |
vin0ep: endpoint { |
| 246 |
remote-endpoint = <&cam0ep>; |
| 247 |
bus-width = <8>; |
| 248 |
bus-type = <MEDIA_BUS_TYPE_BT656>; |
| 249 |
}; |
| 250 |
}; |
| 251 |
}; |
| 252 |
#endif /* CAM_ENABLED */ |
| 253 |
|
| 254 |
#undef CAM_PARENT_I2C |
| 255 |
#undef MCLK_CAM |
| 256 |
#undef CAM_EP |
| 257 |
#undef VIN_EP |
| 258 |
|
| 259 |
/* 8bit CMOS Camera 2 (J14) */ |
| 260 |
#define CAM_PARENT_I2C i2c1 |
| 261 |
#define MCLK_CAM mclk_cam2 |
| 262 |
#define CAM_EP cam1ep |
| 263 |
#define VIN_EP vin1ep |
| 264 |
#undef CAM_ENABLED |
| 265 |
#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" |
| 266 |
//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" |
| 267 |
|
| 268 |
#ifdef CAM_ENABLED |
| 269 |
&vin1 { |
| 270 |
/* Set SW1 switch on the SOM to 'ON' */ |
| 271 |
status = "okay"; |
| 272 |
pinctrl-0 = <&vin1_8bit_pins>; |
| 273 |
pinctrl-names = "default"; |
| 274 |
|
| 275 |
port { |
| 276 |
vin1ep: endpoint { |
| 277 |
remote-endpoint = <&cam1ep>; |
| 278 |
bus-width = <8>; |
| 279 |
bus-type = <MEDIA_BUS_TYPE_BT656>; |
| 280 |
}; |
| 281 |
}; |
| 282 |
}; |
| 283 |
|
| 284 |
#endif /* CAM_ENABLED */ |
| 285 |
|
| 286 |
#undef CAM_PARENT_I2C |
| 287 |
#undef MCLK_CAM |
| 288 |
#undef CAM_EP |
| 289 |
#undef VIN_EP |
| 290 |
|
| 291 |
/* 8bit CMOS Camera 3 (J12) */ |
| 292 |
#define CAM_PARENT_I2C i2c2 |
| 293 |
#define MCLK_CAM mclk_cam3 |
| 294 |
#define CAM_EP cam2ep |
| 295 |
#define VIN_EP vin2ep |
| 296 |
#undef CAM_ENABLED |
| 297 |
#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" |
| 298 |
//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" |
| 299 |
|
| 300 |
#ifdef CAM_ENABLED |
| 301 |
&vin2 { |
| 302 |
status = "okay"; |
| 303 |
pinctrl-0 = <&vin2_pins>; |
| 304 |
pinctrl-names = "default"; |
| 305 |
|
| 306 |
port { |
| 307 |
vin2ep: endpoint { |
| 308 |
remote-endpoint = <&cam2ep>; |
| 309 |
bus-width = <8>; |
| 310 |
data-shift = <8>; |
| 311 |
bus-type = <MEDIA_BUS_TYPE_BT656>; |
| 312 |
}; |
| 313 |
}; |
| 314 |
}; |
| 315 |
#endif /* CAM_ENABLED */ |
| 316 |
|
| 317 |
#undef CAM_PARENT_I2C |
| 318 |
#undef MCLK_CAM |
| 319 |
#undef CAM_EP |
| 320 |
#undef VIN_EP |
| 321 |
|
| 322 |
/* 8bit CMOS Camera 4 (J11) */ |
| 323 |
#define CAM_PARENT_I2C i2c3 |
| 324 |
#define MCLK_CAM mclk_cam4 |
| 325 |
#define CAM_EP cam3ep |
| 326 |
#define VIN_EP vin3ep |
| 327 |
#undef CAM_ENABLED |
| 328 |
#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" |
| 329 |
//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" |
| 330 |
|
| 331 |
#ifdef CAM_ENABLED |
| 332 |
&vin3 { |
| 333 |
status = "okay"; |
| 334 |
pinctrl-0 = <&vin3_pins>; |
| 335 |
pinctrl-names = "default"; |
| 336 |
|
| 337 |
port { |
| 338 |
vin3ep: endpoint { |
| 339 |
remote-endpoint = <&cam3ep>; |
| 340 |
bus-width = <8>; |
| 341 |
bus-type = <MEDIA_BUS_TYPE_BT656>; |
| 342 |
}; |
| 343 |
}; |
| 344 |
}; |
| 345 |
#endif /* CAM_ENABLED */ |
| 346 |
|
| 347 |
#undef CAM_PARENT_I2C |
| 348 |
#undef MCLK_CAM |
| 349 |
#undef CAM_EP |
| 350 |
#undef VIN_EP |