| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree Source for the R-Car H1 (R8A77790) Marzen board |
| 4 |
* |
| 5 |
* Copyright (C) 2013 Renesas Solutions Corp. |
| 6 |
* Copyright (C) 2013 Simon Horman |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
#include "r8a7779.dtsi" |
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include <dt-bindings/input/input.h> |
| 13 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "marzen"; |
| 17 |
compatible = "renesas,marzen", "renesas,r8a7779"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
serial0 = &scif2; |
| 21 |
serial1 = &scif4; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen { |
| 25 |
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; |
| 26 |
stdout-path = "serial0:115200n8"; |
| 27 |
}; |
| 28 |
|
| 29 |
memory@60000000 { |
| 30 |
device_type = "memory"; |
| 31 |
reg = <0x60000000 0x40000000>; |
| 32 |
}; |
| 33 |
|
| 34 |
fixedregulator3v3: regulator-3v3 { |
| 35 |
compatible = "regulator-fixed"; |
| 36 |
regulator-name = "fixed-3.3V"; |
| 37 |
regulator-min-microvolt = <3300000>; |
| 38 |
regulator-max-microvolt = <3300000>; |
| 39 |
regulator-boot-on; |
| 40 |
regulator-always-on; |
| 41 |
}; |
| 42 |
|
| 43 |
vccq_sdhi0: regulator-vccq-sdhi0 { |
| 44 |
compatible = "regulator-gpio"; |
| 45 |
|
| 46 |
regulator-name = "SDHI0 VccQ"; |
| 47 |
regulator-min-microvolt = <1800000>; |
| 48 |
regulator-max-microvolt = <3300000>; |
| 49 |
|
| 50 |
gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; |
| 51 |
gpios-states = <1>; |
| 52 |
states = <3300000 1>, <1800000 0>; |
| 53 |
}; |
| 54 |
|
| 55 |
keypad-0 { |
| 56 |
compatible = "gpio-keys"; |
| 57 |
|
| 58 |
pinctrl-0 = <&keypad0_pins>; |
| 59 |
pinctrl-names = "default"; |
| 60 |
|
| 61 |
key-1 { |
| 62 |
interrupts-extended = <&gpio0 17 IRQ_TYPE_EDGE_FALLING>; |
| 63 |
linux,code = <KEY_1>; |
| 64 |
label = "SW1-1"; |
| 65 |
wakeup-source; |
| 66 |
debounce-interval = <20>; |
| 67 |
}; |
| 68 |
key-2 { |
| 69 |
interrupts-extended = <&gpio0 18 IRQ_TYPE_EDGE_FALLING>; |
| 70 |
linux,code = <KEY_2>; |
| 71 |
label = "SW1-2"; |
| 72 |
wakeup-source; |
| 73 |
debounce-interval = <20>; |
| 74 |
}; |
| 75 |
}; |
| 76 |
|
| 77 |
keypad-1 { |
| 78 |
compatible = "gpio-keys-polled"; |
| 79 |
poll-interval = <50>; |
| 80 |
|
| 81 |
pinctrl-0 = <&keypad1_pins>; |
| 82 |
pinctrl-names = "default"; |
| 83 |
|
| 84 |
key-3 { |
| 85 |
gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; |
| 86 |
linux,code = <KEY_3>; |
| 87 |
label = "SW1-3"; |
| 88 |
debounce-interval = <20>; |
| 89 |
}; |
| 90 |
key-4 { |
| 91 |
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; |
| 92 |
linux,code = <KEY_4>; |
| 93 |
label = "SW1-4"; |
| 94 |
debounce-interval = <20>; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
leds { |
| 99 |
compatible = "gpio-leds"; |
| 100 |
led2 { |
| 101 |
gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; |
| 102 |
}; |
| 103 |
led3 { |
| 104 |
gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; |
| 105 |
}; |
| 106 |
led4 { |
| 107 |
gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
vga-encoder { |
| 112 |
compatible = "adi,adv7123"; |
| 113 |
|
| 114 |
ports { |
| 115 |
#address-cells = <1>; |
| 116 |
#size-cells = <0>; |
| 117 |
|
| 118 |
port@0 { |
| 119 |
reg = <0>; |
| 120 |
vga_enc_in: endpoint { |
| 121 |
remote-endpoint = <&du_out_rgb0>; |
| 122 |
}; |
| 123 |
}; |
| 124 |
port@1 { |
| 125 |
reg = <1>; |
| 126 |
vga_enc_out: endpoint { |
| 127 |
remote-endpoint = <&vga_in>; |
| 128 |
}; |
| 129 |
}; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
vga { |
| 134 |
compatible = "vga-connector"; |
| 135 |
|
| 136 |
port { |
| 137 |
vga_in: endpoint { |
| 138 |
remote-endpoint = <&vga_enc_out>; |
| 139 |
}; |
| 140 |
}; |
| 141 |
}; |
| 142 |
|
| 143 |
lvds-encoder { |
| 144 |
compatible = "thine,thc63lvdm83d"; |
| 145 |
|
| 146 |
ports { |
| 147 |
#address-cells = <1>; |
| 148 |
#size-cells = <0>; |
| 149 |
|
| 150 |
port@0 { |
| 151 |
reg = <0>; |
| 152 |
lvds_enc_in: endpoint { |
| 153 |
remote-endpoint = <&du_out_rgb1>; |
| 154 |
}; |
| 155 |
}; |
| 156 |
port@1 { |
| 157 |
reg = <1>; |
| 158 |
lvds_connector: endpoint { |
| 159 |
}; |
| 160 |
}; |
| 161 |
}; |
| 162 |
}; |
| 163 |
|
| 164 |
x3_clk: x3-clock { |
| 165 |
compatible = "fixed-clock"; |
| 166 |
#clock-cells = <0>; |
| 167 |
clock-frequency = <65000000>; |
| 168 |
}; |
| 169 |
}; |
| 170 |
|
| 171 |
&du { |
| 172 |
pinctrl-0 = <&du_pins>; |
| 173 |
pinctrl-names = "default"; |
| 174 |
status = "okay"; |
| 175 |
|
| 176 |
clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>; |
| 177 |
clock-names = "du.0", "dclkin.0"; |
| 178 |
|
| 179 |
ports { |
| 180 |
port@0 { |
| 181 |
endpoint { |
| 182 |
remote-endpoint = <&vga_enc_in>; |
| 183 |
}; |
| 184 |
}; |
| 185 |
port@1 { |
| 186 |
endpoint { |
| 187 |
remote-endpoint = <&lvds_enc_in>; |
| 188 |
}; |
| 189 |
}; |
| 190 |
}; |
| 191 |
}; |
| 192 |
|
| 193 |
&gpio0 { |
| 194 |
keypad0-hog { |
| 195 |
gpio-hog; |
| 196 |
gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>; |
| 197 |
input; |
| 198 |
}; |
| 199 |
}; |
| 200 |
|
| 201 |
&i2c0 { |
| 202 |
status = "okay"; |
| 203 |
|
| 204 |
clock-frequency = <100000>; |
| 205 |
}; |
| 206 |
|
| 207 |
&irqpin0 { |
| 208 |
status = "okay"; |
| 209 |
}; |
| 210 |
|
| 211 |
&extal_clk { |
| 212 |
clock-frequency = <31250000>; |
| 213 |
}; |
| 214 |
|
| 215 |
&lbsc { |
| 216 |
flash@0 { |
| 217 |
compatible = "cfi-flash"; |
| 218 |
reg = <0x0 0x04000000>; |
| 219 |
pinctrl-0 = <&flash_pins>; |
| 220 |
pinctrl-names = "default"; |
| 221 |
bank-width = <2>; |
| 222 |
|
| 223 |
partitions { |
| 224 |
compatible = "fixed-partitions"; |
| 225 |
#address-cells = <1>; |
| 226 |
#size-cells = <1>; |
| 227 |
|
| 228 |
partition@0 { |
| 229 |
label = "uboot"; |
| 230 |
reg = <0x00000000 0x00040000>; |
| 231 |
read-only; |
| 232 |
}; |
| 233 |
partition@40000 { |
| 234 |
label = "uboot-env"; |
| 235 |
reg = <0x00040000 0x00040000>; |
| 236 |
read-only; |
| 237 |
}; |
| 238 |
partition@80000 { |
| 239 |
label = "flash"; |
| 240 |
reg = <0x00080000 0x03f80000>; |
| 241 |
}; |
| 242 |
}; |
| 243 |
}; |
| 244 |
|
| 245 |
ethernet@18000000 { |
| 246 |
compatible = "smsc,lan89218", "smsc,lan9115"; |
| 247 |
reg = <0x18000000 0x100>; |
| 248 |
pinctrl-0 = <ðernet_pins>; |
| 249 |
pinctrl-names = "default"; |
| 250 |
|
| 251 |
phy-mode = "mii"; |
| 252 |
interrupts-extended = <&irqpin0 1 IRQ_TYPE_EDGE_FALLING>; |
| 253 |
smsc,irq-push-pull; |
| 254 |
reg-io-width = <4>; |
| 255 |
vddvario-supply = <&fixedregulator3v3>; |
| 256 |
vdd33a-supply = <&fixedregulator3v3>; |
| 257 |
}; |
| 258 |
}; |
| 259 |
|
| 260 |
&tmu0 { |
| 261 |
status = "okay"; |
| 262 |
}; |
| 263 |
|
| 264 |
&pfc { |
| 265 |
pinctrl-0 = <&scif_clk_pins>; |
| 266 |
pinctrl-names = "default"; |
| 267 |
|
| 268 |
du_pins: du { |
| 269 |
du0 { |
| 270 |
groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0", "du0_clk_in"; |
| 271 |
function = "du0"; |
| 272 |
}; |
| 273 |
du1 { |
| 274 |
groups = "du1_rgb666", "du1_sync_1", "du1_clk_out"; |
| 275 |
function = "du1"; |
| 276 |
}; |
| 277 |
}; |
| 278 |
|
| 279 |
scif_clk_pins: scif_clk { |
| 280 |
groups = "scif_clk_b"; |
| 281 |
function = "scif_clk"; |
| 282 |
}; |
| 283 |
|
| 284 |
ethernet_pins: ethernet { |
| 285 |
intc { |
| 286 |
groups = "intc_irq1_b"; |
| 287 |
function = "intc"; |
| 288 |
}; |
| 289 |
lbsc { |
| 290 |
groups = "lbsc_ex_cs0"; |
| 291 |
function = "lbsc"; |
| 292 |
}; |
| 293 |
}; |
| 294 |
|
| 295 |
flash_pins: flash { |
| 296 |
groups = "lbsc_cs0"; |
| 297 |
function = "lbsc"; |
| 298 |
}; |
| 299 |
|
| 300 |
scif2_pins: scif2 { |
| 301 |
groups = "scif2_data_c"; |
| 302 |
function = "scif2"; |
| 303 |
}; |
| 304 |
|
| 305 |
scif4_pins: scif4 { |
| 306 |
groups = "scif4_data"; |
| 307 |
function = "scif4"; |
| 308 |
}; |
| 309 |
|
| 310 |
sdhi0_pins: sd0 { |
| 311 |
groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; |
| 312 |
function = "sdhi0"; |
| 313 |
}; |
| 314 |
|
| 315 |
hspi0_pins: hspi0 { |
| 316 |
groups = "hspi0"; |
| 317 |
function = "hspi0"; |
| 318 |
}; |
| 319 |
|
| 320 |
keypad0_pins: keypad-0 { |
| 321 |
pins = "GP_0_17", "GP_0_18"; |
| 322 |
bias-pull-up; |
| 323 |
}; |
| 324 |
keypad1_pins: keypad-1 { |
| 325 |
pins = "GP_0_19", "GP_0_20"; |
| 326 |
bias-pull-up; |
| 327 |
}; |
| 328 |
}; |
| 329 |
|
| 330 |
&sata { |
| 331 |
status = "okay"; |
| 332 |
}; |
| 333 |
|
| 334 |
&scif2 { |
| 335 |
pinctrl-0 = <&scif2_pins>; |
| 336 |
pinctrl-names = "default"; |
| 337 |
|
| 338 |
status = "okay"; |
| 339 |
}; |
| 340 |
|
| 341 |
&scif4 { |
| 342 |
pinctrl-0 = <&scif4_pins>; |
| 343 |
pinctrl-names = "default"; |
| 344 |
|
| 345 |
status = "okay"; |
| 346 |
}; |
| 347 |
|
| 348 |
&scif_clk { |
| 349 |
clock-frequency = <14745600>; |
| 350 |
}; |
| 351 |
|
| 352 |
&sdhi0 { |
| 353 |
pinctrl-0 = <&sdhi0_pins>; |
| 354 |
pinctrl-names = "default"; |
| 355 |
|
| 356 |
vmmc-supply = <&fixedregulator3v3>; |
| 357 |
vqmmc-supply = <&vccq_sdhi0>; |
| 358 |
bus-width = <4>; |
| 359 |
status = "okay"; |
| 360 |
}; |
| 361 |
|
| 362 |
&hspi0 { |
| 363 |
pinctrl-0 = <&hspi0_pins>; |
| 364 |
pinctrl-names = "default"; |
| 365 |
status = "okay"; |
| 366 |
}; |