| 1 |
Transient response of LCR circuits |
| 2 |
================================== |
| 3 |
|
| 4 |
.. image:: schematics/RLC-circuit.svg |
| 5 |
:width: 300px |
| 6 |
|
| 7 |
Closing the switch in the cicuit shown above will change the voltage across the |
| 8 |
capacitor. Depending on the relative values of L, C and R, the voltage may |
| 9 |
show oscillations or it may change in an exponential manner. |
| 10 |
|
| 11 |
Objective |
| 12 |
--------- |
| 13 |
|
| 14 |
Apply a step voltage to an LCR circuit. Capture and analyse the resulting |
| 15 |
voltage across the capacitor. |
| 16 |
|
| 17 |
Procedure |
| 18 |
--------- |
| 19 |
|
| 20 |
.. image:: schematics/RLCtransient.svg |
| 21 |
:width: 300px |
| 22 |
|
| 23 |
- Use the 3000 turn coil and :math:`0.1~\mu F` capacitor |
| 24 |
- Click on 5->0V STEP. Adjust x-axis and repeat if required. |
| 25 |
- FIT the graph to find the resonant frequency & Damping factor. |
| 26 |
- Repeat with increased capacitance and resistance values. |
| 27 |
|
| 28 |
|
| 29 |
.. image:: pics/RLCtransient-screen.png |
| 30 |
:width: 400px |
| 31 |
|
| 32 |
The values chosen are for an underdamped response. The coil has in inductance |
| 33 |
more than 100mH and a resistance of around :math:`500 \Omega`. |
| 34 |
To increase damping, you may add a series resistor, or use a larger value |
| 35 |
capacitor. |
| 36 |
|
| 37 |
Discussion |
| 38 |
---------- |
| 39 |
|
| 40 |
Explore the oscillatory nature of L and C in series. Resonant frequency |
| 41 |
of series LC circuit is given by :math:`f_0â
=â
1/(2\pi\sqrt{LC})`. The damping |
| 42 |
factor is :math:`R/(2\sqrt{LC})`, and it is equal to 1 for critical |
| 43 |
damping. Depending upon the value of C/L and R, the response could be under-damped, |
| 44 |
critically-damped or over-damped. |
| 45 |
|
| 46 |
We have used the 3000 turn coil and a :math:`0,1~\mu F` capacitor. The voltage |
| 47 |
across the capacitor after a 5 to 0V step is shown in figure. The |
| 48 |
measured resonant frequency tallies with :math:`fâ
=â
1/(2\pi\sqrt{LC})`, |
| 49 |
within the component tolerance values. |
| 50 |
|
| 51 |
https://en.wikipedia.org/wiki/RLC_circuit |
| 52 |
|