Debian Codegraph @

eyesjunior/helpFiles/en/_sources/2.11.rst

raw
1 Separating DC & AC components
2 =============================
3
4 A capacitor does not allow DC to pass through it. This property can be demonstrated using a squarewave
5 swinging from 0 to 5V.
6
7 .. image:: schematics/acdc-separating.svg
8 :width: 300px
9
10 Objective
11 ---------
12
13 Separate the AC component of a 0 to 5V sqauarewave.
14
15 Procedure
16 ---------
17
18 - Set SQ1 to 1000 Hz.
19 - Connect SQ1 to A1
20 - Conenct SQ1 to A2 through a :math:`0.1 \mu F` capacitor
21
22 .. image:: pics/acdc-sep-screen.png
23 :width: 400px
24
25
26 Discussion
27 ----------
28
29 The observed waveforms with and without the series capacitor are shown
30 in figure. The voltage is swinging between 0 and 5 volts. After passing
31 through the capacitor the voltage swings from -2.5 volts to +2.5 volts.
32
33 What will you get if you subtract a 2.5 from the y-coordinate of every
34 point of the first graph? That is what the capacitor did. It did not
35 allow the DC part to pass through. This original square wave can be
36 considered as a 2.5V AC superimposed on a 2.5V DC.
37
38 In case the output on A2 is having a DC component, connect a
39 :math:`100k\Omega` resistor from A2 to GND.