Debian Codegraph @

eyesjunior/helpFiles/en/_sources/3.2.rst

raw
1 Half wave rectifier using PN junction
2 =====================================
3
4 A PN junction conducts only in one direction. Only one half of a pure AC
5 signal can pass through a PN junction. This device is widely used for generating
6 DC from AC.
7
8 Objective
9 ---------
10
11 Learn the working of a PN junction diode as a rectifier. Use 1N4148 or
12 1N4003. RC filtering to reduce the ripple (the AC component).
13
14 Procedure
15 ---------
16
17 .. image:: schematics/halfwave.svg
18 :width: 300px
19
20 - Fix the diode on a bread board
21 - Make connections and observe the output
22 - Connect a :math:`1~k\Omega` load resistor, note the difference in amplitude
23
24 The output is shown below.
25
26 .. image:: pics/halfwave-screen.png
27 :width: 400px
28
29 - Connect a :math:`1 \mu F` capacitor, and see the filtering effect.
30 - Try different values load resistors and filter capacitors
31
32 The effect of the RC filter is shown below. The capacitor used is 22 µF and
33 the oscillator circuit is unable to supply the charging current, resulting in
34 a reduction of voltage in the input signal.
35
36 .. image:: pics/halfwave-filter-screen.png
37 :width: 400px
38
39 Discussion
40 ----------
41
42 The negative half is removed by the diode as shown in figure. The output is a bit noisy
43 and there is some reduction in the voltage. When you connect the load resistor, the
44 output becomes clean and the voltage drop becomes around 0.7 volts,
45 the voltage drop across a silicon diode.
46 A load resistor is required for the proper operation of the circuit, it could be more than
47 1kΩ but do NOT use very low values since our AC source can drive only up
48 to 5 mA current.
49
50 We can see that the capacitor charges up and then during the missing
51 cycle it maintains the voltage. The remaining AC component is called the
52 ripple in the DC. Can we use very large capacitance to reduce the ripple ?
53 During what part of the cycle does current flow through the diode ?
54 Amount of peak current is decided by what ?
55