Debian Codegraph @

eyesjunior/helpFiles/en/_sources/4.4.rst

raw
1 Transient Response of RL circuits
2 =================================
3
4 In an RL circuit :math:`V = RI + L(dI/dt)` and solving this will give
5 :math:`I = I_0 \times e^{− (R/L)t}`. The coefficient of the exponential term R/L
6 can be extracted from the graph of voltage across the inductor. The
7 resistance of the inductor coil should be included in the
8 calculations, :math:`R = R_{ext} + R*_L`.
9
10 Objective
11 ---------
12 Capture and analyse the voltage across an inductor when a voltage step is applied
13 to it via a series resistor. By measuring the voltage across the
14 inductor as a function of time, we can extract the R/L ratio.
15
16 Procedure
17 ---------
18
19 .. image:: schematics/RLtransient.svg
20 :width: 300px
21
22 - Use the 3000 turn coil as inductor
23 - Click on *0->5V STEP* and *5->0V step* Buttons to plot the graphs
24 - Adjust the horizontal scale, if required, and repeat.
25 - Calculate the value of inductance
26 - Insert an iron core into the inductor and repeat
27
28 .. image:: pics/RLtransient-screen.png
29 :width: 400px
30
31 Discussion
32 ----------
33
34 The transient response of the RL circuit is shown in figure. The
35 exponential curve is fitted to extract the L/R value. The resistance of
36 the coil is measured by comparing it with the known external resistance
37 under DC conditions. A2 is connected to OD1 for a more accurate
38 measurement of the coil resistance. From this the program calculates the
39 value of inductance and displays it.
40
41 The applied voltages are above zero, but the graph went to negative
42 voltages. Why ?
43
44 What was the current before doing the 5->0 step ? What is back EMF ?
45
46 Repeat with two coils in series, by (a) placing them far away (b)
47 placing one over the other and (c) after changing the orientation. The
48 effect of mutual inductance can be seen.
49
50