Debian Codegraph @

eyesjunior/helpFiles/en/_sources/2.13.rst

raw
1 Resistance of human body
2 ========================
3
4 We have seen that an unknown resistance can be measured by comparing with a known resistance
5 by connecting them in series and measuring the voltages across them. This technique can be used to
6 measure the resistance of human body.
7
8 Objective
9 ---------
10 Measure the resistance of human body by comparing it with a known
11 resistor, for DC and AC voltages.
12
13 .. image:: schematics/res-body.svg
14 :width: 300px
15
16 Procedure
17 ---------
18
19 - Set PVS to 3 volts
20 - Connect a wire from PV1 to A1
21 - Connect one end of a wire to PV1
22 - Connect one end of another wire to A2
23 - Connect a :math:`100\Omega` resistor from A2 to ground.
24 - Enable the Checkboxes to display A1 and A2
25 - Hold the unconnected ends of both wires by your hands.
26 - Repeat using SINE instead of PV1.
27 - Enable amplitude and frequency display for A1 and A2.
28
29 .. image:: pics/res-human-screen.png
30 :width: 400px
31
32 Discussion
33 ----------
34 The AC resistance is less than the DC resistance. The resistance is due
35 to our skin and AC can pass through this, like it passes through the
36 dielectric material of a capacitor. A bit of exploring will reveal that
37 a capacitor is formed between the tip of the wire and blood inside
38 with the skin acting as a dielectric. Explore the effect of a metal plate
39 at the tip of the wire.