Debian Codegraph @

eyesjunior/helpFiles/en/_sources/3.5.rst

raw
1 IC555 Oscillator
2 ================
3
4 IC555 is a very popular time circuit IC. It can be configured as an astable or monostable
5 multivibrator. The values of frequency and duty cycle are decided by two resistors and a capacitor.
6
7
8 Objective
9 ---------
10
11 Wire an astable multivibrator circuit using IC555, measure the frequency
12 and duty cycle of the output.
13
14 Procedure
15 ---------
16
17 .. image:: schematics/ic555.svg
18 :width: 300px
19
20 - Make connections
21 - Set OD1 to high, for powering the circuit
22 - measure frequency and duty cycle.
23 - Repeat by changing the value of R1.
24
25
26 The output waveform is shown below. The frequency and dutycycle can be calculated using the equations given below
27 and compared with the measurements.
28
29 The durations of high and low voltage are: :math:`T_{1} = 0.693(R_{1} + R_{2})C` and :math:`T_{2} = 0.693 R_{2} C`.
30 Frequency :math:`f = \frac{1}{(T_{1}+T_{2})}` and duty cycle :math:`= \frac{T_{1}}{(T_{1}+T_{2})}`
31
32 .. image:: pics/ic555-screen.png
33 :width: 400px
34
35 Discussion
36 ----------
37
38 The output waveform is shown in figure. Change the value of resistors or
39 the capacitor, and compare the frequency and duty cycle with the
40 calculated values. Variable resistors may be used to change the frequency and duty cycle.