| 1 |
The main GUI program |
| 2 |
==================== |
| 3 |
|
| 4 |
Start Applications->Education->ExpEYES-junior from the menu. A four channel |
| 5 |
oscilloscope screen with several extra features will open as shown in |
| 6 |
the figure. Various experiments can be selected from the menu. |
| 7 |
|
| 8 |
.. _the-scope-junior-screen: |
| 9 |
.. figure:: pics/eyes-junior-screen-en.png |
| 10 |
|
| 11 |
The ExpEYES-Junior main GUI |
| 12 |
|
| 13 |
The main window looks like a low frequency four channel oscilloscope, |
| 14 |
with some extra features, on the right side panel. Applications for |
| 15 |
various experiments can be selected from the pulldown menu. A brief |
| 16 |
description of the oscilloscope program is given below. |
| 17 |
|
| 18 |
- Any of the four inputs (A1, A2, IN1 or IN2) can be enabled using the |
| 19 |
corresponding checkbox. The input range can be selected by clicking |
| 20 |
on the menubutton on the right side of the checkbox. Select the |
| 21 |
desired input range from the popup menu. |
| 22 |
- There is another checkbox, to enable mathematical fitting of the data |
| 23 |
using :math:`V=V_0 sin(2\pi f t + \theta )+C` to show the amplitude and |
| 24 |
frequency. |
| 25 |
- The horizontal scale (time base) can be changed by a slider, from 2 |
| 26 |
mS fullscale to 500 mS full scale. |
| 27 |
- The Checkbutton **Freeze**, allows to pause and resume the |
| 28 |
oscilloscope operation. |
| 29 |
- The Trigger level can be set by a slider, and there is a menubutton |
| 30 |
to select the trigger source. |
| 31 |
- To save the traces to a file, edit the filename and click on the |
| 32 |
**SaveTo** button. |
| 33 |
- Clicking on **FFT** shows the frequency spectrum of all the eneabled |
| 34 |
channels, appears on popup windows. |
| 35 |
|
| 36 |
In addition to the Oscilloscope, there are several measurement/control |
| 37 |
options available on the GUI, they are explained below. |
| 38 |
|
| 39 |
- If selected, the voltages at the inputs A1, A2, IN1 and IN2 are sampled |
| 40 |
every second and displayed. |
| 41 |
- The resistance connected between SEN and Ground is measured and |
| 42 |
displayed every second. |
| 43 |
- Clicking **Capacitance on IN1**, measures the value of the capacitor |
| 44 |
connected between IN1 and GND. |
| 45 |
- Clicking **Frequency on IN2**, measures the frequency of an external |
| 46 |
digital (TTL standard) pulse connected to IN2 |
| 47 |
- SQ1 can be set using the same method as explained above. |
| 48 |
- The programmable volages PVS also set in a similar manner. |
| 49 |
- Checkbuttons are provided to control OD1 and CCS. |
| 50 |
|