| 1 |
Voltage of a lemon cell |
| 2 |
======================= |
| 3 |
|
| 4 |
A lemon cell is formed by inserting Copper and Zinc plates in to a lemon, or any dilute acid. |
| 5 |
The voltage developed across the electrodes is very small and the cell has a very high internal |
| 6 |
resistance. Due to this the voltage drops when a load resistor is connected. |
| 7 |
|
| 8 |
Objective |
| 9 |
--------- |
| 10 |
|
| 11 |
Make a lemon cell and explore it's internal resistance. |
| 12 |
|
| 13 |
.. image:: schematics/lemon-cell.svg |
| 14 |
:width: 300px |
| 15 |
|
| 16 |
Procedure |
| 17 |
--------- |
| 18 |
|
| 19 |
- Connect the electrodes to A1 and Ground |
| 20 |
- Enable Checkbutton for displaying the voltage at A1 |
| 21 |
- Connect a :math:`1000\Omega` resistance across the electrodes. |
| 22 |
- Measure the voltage again, to note down the reduction in it. |
| 23 |
|
| 24 |
Discussion |
| 25 |
---------- |
| 26 |
|
| 27 |
Voltage across the Copper and Zinc terminals is nearly .9 volts. |
| 28 |
Connecting the resistor reduces it to 0.33 volts. When connected, |
| 29 |
current will start flowing through the resistor. But why is the voltage |
| 30 |
going down ? |
| 31 |
|
| 32 |
What is the internal resistance of the cell ? |
| 33 |
|
| 34 |
Current is the flow of charges and it has to complete the path. That |
| 35 |
means, current has to flow through the cell also. Depending on the |
| 36 |
internal resistance of the cell, part of the voltage gets dropped inside |
| 37 |
the cell itself. Does the same happen with a new dry-cell ? |