Debian Codegraph @

eyesjunior/helpFiles/en/_sources/3.8.rst

raw
1 NPN Transistor Output characteristics (CE)
2 ===========================================
3 The basic working principle of a transistor is controlling a bigger current in circuit using a small current in another circuit. Being a three terminal device, one terminal has to be common for the two crcuits. The common emitter configuration
4 is very common in most of the applications. We can explore the working of the transistor by studying the relationships between various voltages at different terminals and currents through them.
5
6
7 Objective
8 ---------
9
10 Using an NPN transistor, plot the Collector voltage against the collector current
11 in a common emitter configuration. Repeat it for different base currents. Collector current
12 is calculated from the voltage across the a :math:`1~k\Omega` resistor,
13 in the collector circuit.
14
15 Procedure
16 ---------
17
18 .. image:: schematics/npn-ce-char.svg
19 :width: 300px
20
21 - Fix the transistor on a bread board and make the connections.
22 - Set base voltage to 1 volt and press the START button.
23 - Repeat for different base currents, increment PV2 by 0.3 volt steps.
24
25
26 Discussion
27 ----------
28
29 The base current is set by setting the voltage at one end of the :math:`100~k\Omega`
30 resistor, the other end is connected to the transistor base. The value
31 of base current is calculated by,
32 :math:`I_b = (V_{PV2} − V_{A2})/(100 \times 10^3) \times 10^6~\mu A`.
33 If A2 is not connected, the code assumes 0.6 volts at the base to
34 calculate the base current.