Resistance of human body ======================== We have seen that an unknown resistance can be measured by comparing with a known resistance by connecting them in series and measuring the voltages across them. This technique can be used to measure the resistance of human body. Objective --------- Measure the resistance of human body by comparing it with a known resistor, for DC and AC voltages. .. image:: schematics/res-body.svg :width: 300px Procedure --------- - Set PVS to 3 volts - Connect a wire from PV1 to A1 - Connect one end of a wire to PV1 - Connect one end of another wire to A2 - Connect a :math:`100\Omega` resistor from A2 to ground. - Enable the Checkboxes to display A1 and A2 - Hold the unconnected ends of both wires by your hands. - Repeat using SINE instead of PV1. - Enable amplitude and frequency display for A1 and A2. .. image:: pics/res-human-screen.png :width: 400px Discussion ---------- The AC resistance is less than the DC resistance. The resistance is due to our skin and AC can pass through this, like it passes through the dielectric material of a capacitor. A bit of exploring will reveal that a capacitor is formed between the tip of the wire and blood inside with the skin acting as a dielectric. Explore the effect of a metal plate at the tip of the wire.