Debian Codegraph @

packages/seacas/applications/blot/msstep.f

raw
1 C Copyright(C) 1999-2020 National Technology & Engineering Solutions
2 C of Sandia, LLC (NTESS). Under the terms of Contract DE-NA0003525 with
3 C NTESS, the U.S. Government retains certain rights in this software.
4 C
5 C See packages/seacas/LICENSE for details
6
7 C=======================================================================
8 SUBROUTINE MSSTEP (A, ISTEP, NEWSET, NEWFAC, ANYDEF, ANYUND,
9 & DOIXF, DON2B, DOELED, DOELEU, DODEAD, DONPS, DOESS,
10 & LENF, NLNKF, LINKF, LENL, KLNSET,
11 & KHIDEN, KHIDEF, KIXFAC,
12 & KXN, KYN, KZN, KHZ, KVT, KPD, KDHZ, KDVT, KDPD,
13 & KXF, KYF, KZF, KDXF, KDYF, KDZF,
14 & NEWELB, IELBST, KN2ELB, KDN2B, IF2EL, KNPSUR)
15 C=======================================================================
16
17 C --*** MSSTEP *** (MESH) Compute coordinates, etc for time step
18 C -- Written by Amy Gilkey - revised 05/26/88
19 C --
20 C --MSSTEP computes the values needed for the mesh plot of a particular
21 C --time step. These values include the nodal deformed coordinates,
22 C --the face coordinates (both deformed and undeformed), and
23 C --the line set. The memory for these values is expanded if needed.
24 C --The values which do not change between time steps (e.g., the
25 C --undeformed coordinates are not recalculated.
26 C --
27 C --This routine uses MDFIND to find the following dynamic memory arrays:
28 C -- IF2EL2 - the secondary element number of each face
29 C -- IE2ELB - the element block for each element
30 C --
31 C --Parameters:
32 C -- A - IN - the dynamic memory base array
33 C -- ISTEP - IN - the time step number
34 C -- NEWSET - IN - true iff start of a new plot set
35 C -- NEWFAC - IN - true iff the faces have changed
36 C -- ANYDEF - IN - true iff any deformed mesh is to be plotted
37 C -- ANYUND - IN - true iff any undeformed mesh is to be plotted
38 C -- DOIXF - IN - true iff the IXFAC array is needed
39 C -- DON2B - IN - true iff the IN2ELB array is needed
40 C -- DOELED - IN - true iff the deformed element quarilateral centers
41 C -- are needed
42 C -- DOELEU - IN - true iff the undeformed element quarilateral centers
43 C -- are needed
44 C -- DODEAD - IN - true iff dead nodes are needed
45 C -- DONPS - IN - true iff node set information is needed
46 C -- DOESS - IN - true iff side set information is needed
47 C -- LENF - IN/OUT - the cumulative face counts by element block
48 C -- NLNKF - IN - the number of nodes per face
49 C -- LINKF - IN/OUT - the connectivity for all faces
50 C -- LENL - IN/OUT - the cumulative line counts by element block
51 C -- KLNSET - IN/OUT - the dynamic memory index of the sorted line set
52 C -- KHIDEN - OUT - the index of HIDENP - sized only
53 C -- KHIDEF - OUT - the index of HIDEF - sized only
54 C -- KIXFAC - OUT - the index of IXFAC - sized only
55 C -- KXN, KYN, KZN - IN/OUT - the indices of XN, YN, ZN -
56 C -- the nodal coordinates (ZN for 3D only)
57 C -- KHZ, KVT, KPD - IN/OUT - the indices of HZ, VT, PD -
58 C -- the undeformed nodal coordinates
59 C -- (rotated for 3D, PD for 3D only)
60 C -- KDHZ, KDVT, KDPD - IN/OUT - the indices of DHZ, DVT, DPD -
61 C -- the deformed nodal coordinates
62 C -- (rotated for 3D, DPD for 3D only)
63 C -- KXF, KYF, KZF - IN/OUT - the indices of XF, YF, ZF -
64 C -- the element face center coordinates
65 C -- (rotated for 3D, ZF for 3D only)
66 C -- KDXF, KDYF, KDZF - IN/OUT - the indices of DXF, DYF, DZF -
67 C -- the deformed face center coordinates
68 C -- (rotated for 3D, DZF for 3D only)
69 C -- NEWELB - IN/OUT - the new element blocks flag:
70 C -- 0 = no new element blocks
71 C -- 1 = new selected element blocks
72 C -- 2 = new displayed element blocks (implies new selected blocks)
73 C -- IELBST - IN/OUT - the element block status:
74 C -- -1 = OFF, 0 = ON, but not selected, 1 = selected
75 C -- KN2ELB - IN/OUT - the index of IN2ELB -
76 C - the element block for each node;
77 C -- <0 if not in any selected element block
78 C -- =0 if in more than one selected element block
79 C -- KDN2B - IN/OUT - the index of IDN2B -
80 C -- the element block for each dead node; dead if >= 0
81 C -- IF2EL - IN - the element number of each face
82 C -- KNPSUR - IN/OUT - the index of NPSURF -
83 C -- the node numbers of the surface nodes or mesh boundary nodes (2D)
84 C --
85 C --Common Variables:
86 C -- Uses NDIM, NELBLK of /DBNUMS/
87 C -- Uses IS3DIM, NNPSUR, NUMNPF, LLNSET of /D3NUMS/
88 C -- Uses DEFPRO, DEFOK, DFAC of /DEFORM/
89 C -- Uses ROTMAT, ROTCEN of /ROTOPT/
90
91 include 'dbnums.blk'
92 include 'd3nums.blk'
93 include 'deform.blk'
94 include 'rotopt.blk'
95 include 'sizes.blk'
96
97 DIMENSION A(*)
98 LOGICAL NEWSET, NEWFAC
99 LOGICAL ANYDEF, ANYUND
100 LOGICAL DOIXF, DON2B, DOELED, DOELEU, DODEAD, DONPS, DOESS
101 INTEGER LENF(0:NELBLK+4)
102 INTEGER NLNKF(NELBLK)
103 INTEGER LINKF(*)
104 INTEGER LENL(-2:NELBLK)
105 INTEGER NEWELB
106 INTEGER IELBST(NELBLK)
107 INTEGER IF2EL(*)
108
109 LOGICAL NEWNPD, NEWNPU, NEWELD, NEWELU
110 SAVE NEWNPU, NEWELU
111
112 DATA NEWNPU, NEWELU / .TRUE., .TRUE. /
113
114 IF (NEWFAC) THEN
115 C --Force the re-calculation of connected element count, if needed
116 NEWELB = 1
117
118 C --Force the re-calculation of undeformed nodal and face coordinates
119 NEWNPU = .TRUE.
120 NEWELU = .TRUE.
121
122 C --Set size of deformed coordinate arrays for hidden line algorithm
123 NPSIZ = NUMNPF
124 IF (IS3DIM) NPSIZ = (13 * NUMNPF) / 10
125 END IF
126
127 C --Force the re-calculation of deformed nodal and face coordinates
128 NEWNPD = DEFOK .AND. DEFPRO
129 NEWELD = DEFOK .AND. DEFPRO
130
131 C --Force the re-calculation of undeformed nodal and face coordinates
132 IF (NEWROT .OR. NEWSET) THEN
133 NEWNPU = .TRUE.
134 NEWELU = .TRUE.
135 END IF
136
137 C --Release memory that will vary in size or not be needed
138
139 IF (NEWSET .OR. NEWFAC) THEN
140 IF (NEWELB .GE. 1) THEN
141 CALL MDLONG ('IN2ELB', KN2ELB, 0)
142 END IF
143 IF (DODEAD) CALL MDLONG ('IDN2B', KDN2B, 0)
144 END IF
145 IF (NNPSUR .LT. 0) THEN
146 CALL MDLONG ('NPSURF', KNPSUR, 0)
147 END IF
148 IF (IS3DIM .AND. NEWNPU) THEN
149 CALL MDLONG ('HZ', KHZ, 0)
150 CALL MDLONG ('VT', KVT, 0)
151 IF (IS3DIM) CALL MDLONG ('PD', KPD, 0)
152 END IF
153 IF (NEWNPD) THEN
154 CALL MDLONG ('DHZ', KDHZ, 0)
155 CALL MDLONG ('DVT', KDVT, 0)
156 IF (IS3DIM) CALL MDLONG ('DPD', KDPD, 0)
157 END IF
158 IF (NEWELU) THEN
159 CALL MDLONG ('XF', KXF, 0)
160 CALL MDLONG ('YF', KYF, 0)
161 IF (IS3DIM) CALL MDLONG ('ZF', KZF, 0)
162 END IF
163 IF (NEWELD) THEN
164 CALL MDLONG ('DXF', KDXF, 0)
165 CALL MDLONG ('DYF', KDYF, 0)
166 IF (IS3DIM) CALL MDLONG ('DZF', KDZF, 0)
167 END IF
168 IF (IS3DIM .AND. NEWFAC) THEN
169 CALL MDLONG ('HIDENP', KHIDEN, 0)
170 CALL MDLONG ('HIDEF', KHIDEF, 0)
171 IF (DOIXF) CALL MDLONG ('IXFAC', KIXFAC, 0)
172 END IF
173
174 CALL MDSTAT (NERR, MEM)
175 IF (NERR .GT. 0) GOTO 100
176
177 C --Compute new line set if new faces
178
179 IF (NEWFAC) THEN
180 CALL MSLINS (A, LENF, NLNKF, LINKF, IF2EL, LENL, KLNSET)
181 CALL MDSTAT (NERR, MEM)
182 IF (NERR .GT. 0) GOTO 100
183 END IF
184
185 C --Compute node to element block and dead node to element block,
186 C --if needed
187
188 IF ((NEWELB .GE. 1) .AND. (DON2B .OR. DONPS .OR. DOESS)) THEN
189 IF (NEWSET .OR. NEWFAC) THEN
190 CALL MDLONG ('IN2ELB', KN2ELB, NUMNPF)
191 CALL MDSTAT (NERR, MEM)
192 IF (NERR .GT. 0) GOTO 100
193 END IF
194
195 CALL MAKN2B (LENF, NLNKF, LINKF, IELBST, A(KN2ELB))
196 NEWELB = 0
197 END IF
198
199 IF (DODEAD) THEN
200 IF (NEWSET .OR. NEWFAC) THEN
201 CALL MDLONG ('IDN2B', KDN2B, NUMNPF)
202 END IF
203 IF (IS3DIM) THEN
204 CALL MDFIND ('IF2EL2', KIF2E2, IDUM)
205 ELSE
206 KIF2E2 = 1
207 KE2ELB = 1
208 END IF
209 CALL MDFIND ('IE2ELB', KE2ELB, IDUM)
210 CALL MDSTAT (NERR, MEM)
211 IF (NERR .GT. 0) GOTO 100
212
213 CALL MAKD2B (LENF, NLNKF, LINKF, IELBST,
214 & IF2EL, A(KIF2E2), A(KE2ELB), A(KDN2B))
215
216 END IF
217
218 C --Compute NPSURF nodes for 3D, if changed
219
220 IF (NNPSUR .LT. 0) THEN
221 CALL MDLONG ('NPSURF', KNPSUR, NUMNPF)
222 CALL MDSTAT (NERR, MEM)
223 IF (NERR .GT. 0) GOTO 100
224
225 CALL MAKSUR (LENF, NLNKF, LINKF,
226 & DODEAD, A(KDN2B), A(KNPSUR))
227
228 CALL MDLONG ('NPSURF', KNPSUR, NNPSUR)
229 END IF
230
231 C --Put rotated undeformed coordinates in undeformed arrays, if needed
232
233 IF (NEWNPU .AND. ANYUND) THEN
234 IF (IS3DIM) THEN
235 CALL MDLONG ('HZ', KHZ, NPSIZ)
236 CALL MDLONG ('VT', KVT, NPSIZ)
237 IF (IS3DIM) CALL MDLONG ('PD', KPD, NPSIZ)
238 ELSE
239 KHZ = KXN
240 KVT = KYN
241 KPD = KZN
242 END IF
243
244 IF (IS3DIM) THEN
245 CALL BL_ROTATE (NNPSUR, A(KNPSUR), ROTMAT, ROTCEN,
246 & A(KXN), A(KYN), A(KZN), A(KHZ), A(KVT), A(KPD))
247
248 C --Force the re-calculation of undeformed face coordinates
249 NEWELU = .TRUE.
250 END IF
251
252 NEWNPU = .FALSE.
253 NEWROT = .FALSE.
254 END IF
255
256 C --Compute deformed nodal coordinates, if needed
257
258 IF (NEWNPD .AND. ANYDEF) THEN
259 CALL MDLONG ('DHZ', KDHZ, NPSIZ)
260 CALL MDLONG ('DVT', KDVT, NPSIZ)
261 IF (IS3DIM) CALL MDLONG ('DPD', KDPD, NPSIZ)
262
263 CALL DEFXYZ (A, ISTEP, DFAC, IS3DIM, A(KNPSUR),
264 & A(KXN), A(KYN), A(KZN), A(KDHZ), A(KDVT), A(KDPD))
265
266 IF (IS3DIM) THEN
267 CALL BL_ROTATE (NNPSUR, A(KNPSUR), ROTMAT, ROTCEN,
268 & A(KDHZ), A(KDVT), A(KDPD), A(KDHZ), A(KDVT), A(KDPD))
269 END IF
270
271 C --Force the re-calculation of deformed face coordinates
272 NEWELD = .TRUE.
273
274 NEWNPU = .FALSE.
275 END IF
276
277 C --Get face coordinates, if changed
278
279 IF (NEWELU .AND. DOELEU) THEN
280 IF (NEWELU) THEN
281 CALL MDLONG ('XF', KXF, LENF(NELBLK))
282 CALL MDLONG ('YF', KYF, LENF(NELBLK))
283 IF (IS3DIM) CALL MDLONG ('ZF', KZF, LENF(NELBLK))
284 CALL MDSTAT (NERR, MEM)
285 IF (NERR .GT. 0) GOTO 100
286 END IF
287
288 CALL ELECOR (NDIM, NELBLK, LENF, NLNKF, LINKF,
289 & A(KHZ), A(KVT), A(KPD), A(KXF), A(KYF), A(KZF))
290 NEWELU = .FALSE.
291 END IF
292
293 IF (NEWELD .AND. DOELED) THEN
294 IF (NEWELD) THEN
295 CALL MDLONG ('DXF', KDXF, LENF(NELBLK))
296 CALL MDLONG ('DYF', KDYF, LENF(NELBLK))
297 IF (IS3DIM) CALL MDLONG ('DZF', KDZF, LENF(NELBLK))
298 CALL MDSTAT (NERR, MEM)
299 IF (NERR .GT. 0) GOTO 100
300 END IF
301
302 CALL ELECOR (NDIM, NELBLK, LENF, NLNKF, LINKF,
303 & A(KDHZ), A(KDVT), A(KDPD), A(KDXF), A(KDYF), A(KDZF))
304 NEWELD = .FALSE.
305 END IF
306
307 IF (IS3DIM .AND. NEWFAC) THEN
308 CALL MDLONG ('HIDENP', KHIDEN, NUMNPF)
309 CALL MDLONG ('HIDEF', KHIDEF, LENF(NELBLK))
310 IF (DOIXF) CALL MDLONG ('IXFAC', KIXFAC, LENF(NELBLK))
311 CALL MDSTAT (NERR, MEM)
312 IF (NERR .GT. 0) GOTO 100
313 END IF
314
315 100 CONTINUE
316 RETURN
317 END