Debian Codegraph @

packages/seacas/applications/blot/msgeom.f

raw
1 C Copyright(C) 1999-2020 National Technology & Engineering Solutions
2 C of Sandia, LLC (NTESS). Under the terms of Contract DE-NA0003525 with
3 C NTESS, the U.S. Government retains certain rights in this software.
4 C
5 C See packages/seacas/LICENSE for details
6
7 C=======================================================================
8 SUBROUTINE MSGEOM (A, CURPRO, ISTEP,
9 & LENF, NLNKF, KLINKF, KXN, KYN, KZN,
10 & KIF2EL, NEWELB, IELBST, NEWFAC, FIXFAC)
11 C=======================================================================
12
13 C --*** MSGEOM *** (MESH) Correct the mesh faces
14 C -- Written by Amy Gilkey - revised 05/27/88
15 C --
16 C --MSGEOM determines the new face array, if it has changed.
17 C --It handles new displayed element blocks, a new "cut" through the mesh,
18 C --and element birth/death (for the time step). A flag is set if the
19 C --faces are changed.
20 C --
21 C --This routine reserves and sets the following dynamic memory arrays:
22 C -- IX2NP - the node number for each mesh index
23 C --
24 C --This routine uses MDFIND to find the following dynamic memory arrays:
25 C -- IF2EL2 - the secondary element number of each face
26 C -- IE2ELB - the element block for each element
27 C -- XN, YN, ZN - IN - the full set of nodal coordinates (ZN for 3D only)
28 C -- LENE - the cumulative element counts by element block
29 C -- ISEVOK - the element block variable truth table;
30 C -- variable i of block j exists iff ISEVOK(j,i)
31 C --
32 C --Parameters:
33 C -- A - IN - the dynamic memory base array
34 C -- CURPRO - IN - the name of the program that changed the faces
35 C -- ISTEP - IN - the time step number
36 C -- LENF - IN/OUT - the cumulative face counts by element block
37 C -- LENF(0) is always 0
38 C -- LENF(1..NELBLK) is the end of the surface faces of element block (i)
39 C -- LENF(NELBLK+1) is the end of the interior faces
40 C -- LENF(NELBLK+2) is the end of the faces that are dead
41 C -- LENF(NELBLK+3) is the end of the faces outside a cut
42 C -- LENF(NELBLK+4) is the end of the faces in a non-selected block
43 C -- NLNKF - IN - the number of nodes per face
44 C -- KLINKF - IN/OUT - the index of LINKF - the connectivity for all faces
45 C -- KXN, KYN, KZN - IN - the indices of XN, YN, ZN -
46 C -- the nodal coordinates (ZN for 3D only)
47 C -- KIF2EL - IN/OUT - the index of IF2EL - the element number of each face
48 C -- NEWELB - IN/OUT - the new element blocks flag:
49 C -- 0 = no new element blocks
50 C -- 1 = new selected element blocks
51 C -- 2 = new displayed element blocks (implies new selected blocks)
52 C -- IELBST - IN - the element block status:
53 C -- -1 = OFF, 0 = ON, but not selected, 1 = selected
54 C -- NEWFAC - OUT - set true if the faces are changed, else false
55 C -- FIXFAC - OUT - set true if the program that last set the faces is
56 C -- not the current program (some program-specific values may need
57 C -- to be reset), else false
58 C --
59 C --Common Variables:
60 C -- Uses NDIM, NUMEL, NELBLK of /DBNUMS/
61 C -- Uses IS3DIM of /D3NUMS/
62 C -- Uses NALVAR of /MSHOPT/
63 C -- Sets and uses NEWROT, ROTMAT, ROTCEN of /ROTOPT/
64 C -- Sets and uses NEWCUT, ISCUT, CUTPT, CUTNRM of /CUTOPT/
65
66 include 'dbnums.blk'
67 include 'd3nums.blk'
68 include 'mshopt.blk'
69 include 'rotopt.blk'
70 include 'cutopt.blk'
71
72 DIMENSION A(*)
73 CHARACTER*(*) CURPRO
74 INTEGER LENF(0:NELBLK+4)
75 INTEGER NLNKF(NELBLK)
76 INTEGER NEWELB
77 INTEGER IELBST(NELBLK)
78 LOGICAL NEWFAC
79 LOGICAL FIXFAC
80
81 LOGICAL FIRST
82 SAVE FIRST
83 C --FIRST - true iff first time through routine
84
85 CHARACTER*8 LSTPRO
86 SAVE LSTPRO
87 C --LSTPRO - the last program to set the faces
88
89 INTEGER NALOLD
90 SAVE NALOLD
91 C --NALOLD - the last setting of NALVAR
92
93 DATA FIRST / .TRUE. /
94 DATA NALOLD / 0 /
95 DATA LSTPRO / ' ' /
96
97 C --Figure out if new face set needs to be calculated
98
99 NEWFAC = .FALSE.
100
101 IF (FIRST) THEN
102 LSTPRO = CURPRO
103 END IF
104
105 IF (IS3DIM .AND. (NEWELB .EQ. 2)) THEN
106 NEWFAC = .TRUE.
107 END IF
108
109 IF (IS3DIM .AND. NEWCUT) THEN
110 NEWFAC = .TRUE.
111 END IF
112
113 IF ((NALOLD .GT. 0) .AND. (NALVAR .LE. 0)) THEN
114 NEWFAC = .TRUE.
115 END IF
116
117 IF ((NALVAR .GT. 0) .AND. (ISTEP .GE. 1)) THEN
118 NEWFAC = .TRUE.
119 END IF
120
121 C --Compute new face set if element blocks have been turned on/off
122
123 IF (IS3DIM .AND. (NEWELB .EQ. 2)) THEN
124
125 C --Determine new face set for new element blocks
126
127 NSETS = NELBLK + 4
128 CALL MDRSRV ('NEWELB', KNEWB, LENF(NSETS))
129 IF (IS3DIM) CALL MDFIND ('IF2EL2', KIF2E2, IDUM)
130 CALL MDFIND ('IE2ELB', KE2ELB, IDUM)
131 CALL MDSTAT (NERR, MEM)
132 IF (NERR .GT. 0) GOTO 100
133
134 CALL FIXELB (IELBST, LENF, A(KIF2EL), A(KIF2E2), A(KE2ELB),
135 & A(KNEWB))
136
137 C --Adjust the face connectivity
138
139 CALL SORLNK (A, NSETS, A(KNEWB),
140 & LENF, NLNKF, A(KLINKF), A(KIF2EL), A(KIF2E2), A(KE2ELB))
141
142 CALL MDDEL ('NEWELB')
143
144 C --If no faces are ON, print error message
145 C --and go back for more commands with NEWELB set
146
147 IF (LENF(NELBLK) .EQ. 0) THEN
148 CALL PRTERR ('ERROR', 'No element blocks are displayed')
149 NEWELB = 2
150 GOTO 100
151 END IF
152
153 C --Force the re-calculation of the cut, if cut
154 IF (ISCUT) NEWCUT = .TRUE.
155
156 C --All faces are now alive
157 NALOLD = 0
158
159 C --Force the re-calculation of connected element count, if needed
160 NEWELB = 1
161 END IF
162
163 C --Compute new face set if the object has been cut
164
165 IF (IS3DIM .AND. NEWCUT) THEN
166
167 C --Compute new face set for cut
168
169 NSETS = NELBLK + 3
170 CALL MDRSRV ('NEWELB', KNEWB, LENF(NSETS))
171 IF (IS3DIM) CALL MDFIND ('IF2EL2', KIF2E2, IDUM)
172 CALL MDFIND ('IE2ELB', KE2ELB, IDUM)
173 CALL MDSTAT (NERR, MEM)
174 IF (NERR .GT. 0) GOTO 100
175
176 IF (ISCUT) THEN
177 CALL MDRSRV ('SCRFAC', KFSTAT, LENF(NELBLK+3))
178 CALL MDRSRV ('ROUTEL', KESTAT, NUMEL)
179 CALL MDRSRV ('ROUTZC', KZC, NUMNP)
180 C --Get the full set of coordinates
181 CALL MDFIND ('XN', KX, IDUM)
182 CALL MDFIND ('YN', KY, IDUM)
183 CALL MDFIND ('ZN', KZ, IDUM)
184 CALL MDSTAT (NERR, MEM)
185 IF (NERR .GT. 0) GOTO 100
186
187 CALL FIXCUT (CUTPT, CUTNRM, A(KX), A(KY), A(KZ),
188 & LENF, NLNKF, A(KLINKF),
189 & A(KIF2EL), A(KIF2E2), A(KE2ELB),
190 & A(KFSTAT), A(KESTAT), A(KZC), A(KNEWB))
191
192 CALL MDDEL ('SCRFAC')
193 CALL MDDEL ('ROUTEL')
194 CALL MDDEL ('ROUTZC')
195
196 ELSE
197 CALL ALLCUT (A(KE2ELB), LENF, A(KIF2EL), A(KIF2E2),
198 & A(KNEWB))
199 END IF
200
201 C --Adjust the face connectivity
202
203 CALL SORLNK (A, NSETS, A(KNEWB),
204 & LENF, NLNKF, A(KLINKF), A(KIF2EL), A(KIF2E2), A(KE2ELB))
205
206 CALL MDDEL ('NEWELB')
207
208 C --If no faces are defined by cut, delete cut, print error message
209 C --and go back for more commands with NEWCUT set
210
211 IF (LENF(NELBLK) .EQ. 0) THEN
212 CALL PRTERR ('ERROR',
213 & 'No elements are defined by the cutting plane')
214 NEWCUT = .TRUE.
215 GOTO 100
216 END IF
217
218 C --All faces are now alive
219 NALOLD = 0
220
221 NEWCUT = .FALSE.
222 END IF
223
224 C --Compute new face set (and line set for 2D) for birth/death turned off
225
226 IF ((NALOLD .GT. 0) .AND. (NALVAR .LE. 0)) THEN
227
228 C --Compute new face set for birth/death turned off
229
230 NSETS = NELBLK + 2
231 CALL MDRSRV ('NEWELB', KNEWB, LENF(NSETS))
232 IF (IS3DIM) CALL MDFIND ('IF2EL2', KIF2E2, IDUM)
233 CALL MDFIND ('IE2ELB', KE2ELB, IDUM)
234 CALL MDSTAT (NERR, MEM)
235 IF (NERR .GT. 0) GOTO 100
236
237 IF (.NOT. IS3DIM) THEN
238 CALL ALLAL2 (LENF, A(KIF2EL), A(KE2ELB), A(KNEWB))
239 ELSE
240 CALL ALLAL3 (LENF, A(KIF2EL), A(KIF2E2), A(KE2ELB),
241 & A(KNEWB))
242 END IF
243
244 C --Adjust the face connectivity
245
246 CALL SORLNK (A, NSETS, A(KNEWB),
247 & LENF, NLNKF, A(KLINKF), A(KIF2EL), A(KIF2E2), A(KE2ELB))
248
249 CALL MDDEL ('NEWELB')
250
251 NALOLD = NALVAR
252 END IF
253
254 C --Compute new face set (and line set for 2D) for birth/death for step
255
256 IF ((NALVAR .GT. 0) .AND. (ISTEP .GE. 1)) THEN
257
258 C --Compute new face set for birth/death for step
259
260 NSETS = NELBLK + 2
261 CALL MDRSRV ('NEWELB', KNEWB, LENF(NSETS))
262 IF (IS3DIM) CALL MDFIND ('IF2EL2', KIF2E2, IDUM)
263 CALL MDFIND ('IE2ELB', KE2ELB, IDUM)
264
265 CALL MDRSRV ('ROUTEL', KALIVE, NUMEL)
266 CALL MDFIND ('LENE', KLENE, IDUM)
267 CALL MDFIND ('ISEVOK', KIEVOK, IDUM)
268 CALL MDSTAT (NERR, MEM)
269 IF (NERR .GT. 0) GOTO 100
270
271 CALL GETALV (A, NALVAR, ALIVAL, ISTEP, A(KLENE), A(KIEVOK),
272 & A(KALIVE), A(KALIVE))
273
274 IF (.NOT. IS3DIM) THEN
275 CALL FIXAL2 (A(KALIVE),
276 & LENF, A(KIF2EL), A(KE2ELB), A(KNEWB))
277 ELSE
278 CALL FIXAL3 (A(KALIVE),
279 & LENF, A(KIF2EL), A(KIF2E2), A(KE2ELB), A(KNEWB))
280 END IF
281
282 CALL MDDEL ('ROUTEL')
283
284 C --Adjust the face connectivity
285
286 CALL SORLNK (A, NSETS, A(KNEWB),
287 & LENF, NLNKF, A(KLINKF), A(KIF2EL), A(KIF2E2), A(KE2ELB))
288
289 CALL MDDEL ('NEWELB')
290
291 C --If no faces are alive, print error message
292 C --and skip time step
293
294 IF (LENF(NELBLK) .EQ. 0) THEN
295 CALL PRTERR ('ERROR', 'No elements are alive')
296 GOTO 100
297 END IF
298
299 NALOLD = NALVAR
300 END IF
301
302 100 CONTINUE
303
304 IF (NEWFAC) THEN
305
306 C --Force the re-calculation of which nodes are on the surface
307 NNPSUR = -999
308 END IF
309
310 IF (NEWFAC) LSTPRO = CURPRO
311 FIXFAC = (CURPRO .NE. LSTPRO)
312
313 FIRST = .FALSE.
314
315 RETURN
316 END