| 1 |
// SPDX-License-Identifier: ISC |
| 2 |
/* |
| 3 |
* Device Tree file for Intel XScale Network Processors |
| 4 |
* in the IXP 4xx series. |
| 5 |
*/ |
| 6 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 7 |
#include <dt-bindings/gpio/gpio.h> |
| 8 |
|
| 9 |
/ { |
| 10 |
soc { |
| 11 |
#address-cells = <1>; |
| 12 |
#size-cells = <1>; |
| 13 |
ranges; |
| 14 |
compatible = "simple-bus"; |
| 15 |
interrupt-parent = <&intcon>; |
| 16 |
|
| 17 |
/* |
| 18 |
* The IXP4xx expansion bus is a set of up to 7 each up to 16MB |
| 19 |
* windows in the 256MB space from 0x50000000 to 0x5fffffff. |
| 20 |
*/ |
| 21 |
bus@c4000000 { |
| 22 |
/* compatible and reg filled in by per-soc device tree */ |
| 23 |
native-endian; |
| 24 |
#address-cells = <2>; |
| 25 |
#size-cells = <1>; |
| 26 |
ranges = <0 0x0 0x50000000 0x01000000>, |
| 27 |
<1 0x0 0x51000000 0x01000000>, |
| 28 |
<2 0x0 0x52000000 0x01000000>, |
| 29 |
<3 0x0 0x53000000 0x01000000>, |
| 30 |
<4 0x0 0x54000000 0x01000000>, |
| 31 |
<5 0x0 0x55000000 0x01000000>, |
| 32 |
<6 0x0 0x56000000 0x01000000>, |
| 33 |
<7 0x0 0x57000000 0x01000000>; |
| 34 |
dma-ranges = <0 0x0 0x50000000 0x01000000>, |
| 35 |
<1 0x0 0x51000000 0x01000000>, |
| 36 |
<2 0x0 0x52000000 0x01000000>, |
| 37 |
<3 0x0 0x53000000 0x01000000>, |
| 38 |
<4 0x0 0x54000000 0x01000000>, |
| 39 |
<5 0x0 0x55000000 0x01000000>, |
| 40 |
<6 0x0 0x56000000 0x01000000>, |
| 41 |
<7 0x0 0x57000000 0x01000000>; |
| 42 |
}; |
| 43 |
|
| 44 |
qmgr: queue-manager@60000000 { |
| 45 |
compatible = "intel,ixp4xx-ahb-queue-manager"; |
| 46 |
reg = <0x60000000 0x4000>; |
| 47 |
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; |
| 48 |
}; |
| 49 |
|
| 50 |
pci@c0000000 { |
| 51 |
/* compatible filled in by per-soc device tree */ |
| 52 |
reg = <0xc0000000 0x1000>; |
| 53 |
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, |
| 54 |
<9 IRQ_TYPE_LEVEL_HIGH>, |
| 55 |
<10 IRQ_TYPE_LEVEL_HIGH>; |
| 56 |
#address-cells = <3>; |
| 57 |
#size-cells = <2>; |
| 58 |
device_type = "pci"; |
| 59 |
bus-range = <0x00 0xff>; |
| 60 |
status = "disabled"; |
| 61 |
|
| 62 |
ranges = |
| 63 |
/* |
| 64 |
* 64MB 32bit non-prefetchable memory 0x48000000-0x4bffffff |
| 65 |
* done in 4 chunks of 16MB each. |
| 66 |
*/ |
| 67 |
<0x02000000 0 0x48000000 0x48000000 0 0x04000000>, |
| 68 |
/* 64KB I/O space at 0x4c000000 */ |
| 69 |
<0x01000000 0 0x00000000 0x4c000000 0 0x00010000>; |
| 70 |
|
| 71 |
/* |
| 72 |
* This needs to map to the start of physical memory so |
| 73 |
* PCI devices can see all (hopefully) memory. This is done |
| 74 |
* using 4 1:1 16MB windows, so the RAM should not be more than |
| 75 |
* 64 MB for this to work. If your memory is anywhere else |
| 76 |
* than at 0x0 you need to alter this. |
| 77 |
*/ |
| 78 |
dma-ranges = |
| 79 |
<0x02000000 0 0x00000000 0x00000000 0 0x04000000>; |
| 80 |
|
| 81 |
/* Each unique DTS using PCI must specify the swizzling */ |
| 82 |
}; |
| 83 |
|
| 84 |
uart0: serial@c8000000 { |
| 85 |
compatible = "intel,xscale-uart"; |
| 86 |
reg = <0xc8000000 0x1000>; |
| 87 |
/* |
| 88 |
* The reg-offset and reg-shift is a side effect |
| 89 |
* of running the platform in big endian mode. |
| 90 |
*/ |
| 91 |
reg-offset = <3>; |
| 92 |
reg-shift = <2>; |
| 93 |
interrupts = <15 IRQ_TYPE_LEVEL_HIGH>; |
| 94 |
clock-frequency = <14745600>; |
| 95 |
no-loopback-test; |
| 96 |
}; |
| 97 |
|
| 98 |
uart1: serial@c8001000 { |
| 99 |
compatible = "intel,xscale-uart"; |
| 100 |
reg = <0xc8001000 0x1000>; |
| 101 |
/* |
| 102 |
* The reg-offset and reg-shift is a side effect |
| 103 |
* of running the platform in big endian mode. |
| 104 |
*/ |
| 105 |
reg-offset = <3>; |
| 106 |
reg-shift = <2>; |
| 107 |
interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; |
| 108 |
clock-frequency = <14745600>; |
| 109 |
no-loopback-test; |
| 110 |
}; |
| 111 |
|
| 112 |
gpio0: gpio@c8004000 { |
| 113 |
compatible = "intel,ixp4xx-gpio"; |
| 114 |
reg = <0xc8004000 0x1000>; |
| 115 |
gpio-controller; |
| 116 |
#gpio-cells = <2>; |
| 117 |
interrupt-controller; |
| 118 |
#interrupt-cells = <2>; |
| 119 |
}; |
| 120 |
|
| 121 |
intcon: interrupt-controller@c8003000 { |
| 122 |
/* |
| 123 |
* Note: no compatible string. The subvariant of the |
| 124 |
* chip needs to define what version it is. The |
| 125 |
* location of the interrupt controller is fixed in |
| 126 |
* memory across all variants. |
| 127 |
*/ |
| 128 |
reg = <0xc8003000 0x100>; |
| 129 |
interrupt-controller; |
| 130 |
#interrupt-cells = <2>; |
| 131 |
}; |
| 132 |
|
| 133 |
timer@c8005000 { |
| 134 |
compatible = "intel,ixp4xx-timer"; |
| 135 |
reg = <0xc8005000 0x100>; |
| 136 |
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; |
| 137 |
}; |
| 138 |
|
| 139 |
npe: npe@c8006000 { |
| 140 |
compatible = "intel,ixp4xx-network-processing-engine"; |
| 141 |
reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; |
| 142 |
#address-cells = <1>; |
| 143 |
#size-cells = <0>; |
| 144 |
|
| 145 |
/* NPE-A contains two high-speed serial links */ |
| 146 |
hss@0 { |
| 147 |
compatible = "intel,ixp4xx-hss"; |
| 148 |
reg = <0>; |
| 149 |
intel,npe-handle = <&npe 0>; |
| 150 |
status = "disabled"; |
| 151 |
}; |
| 152 |
|
| 153 |
hss@1 { |
| 154 |
compatible = "intel,ixp4xx-hss"; |
| 155 |
reg = <1>; |
| 156 |
intel,npe-handle = <&npe 0>; |
| 157 |
status = "disabled"; |
| 158 |
}; |
| 159 |
|
| 160 |
/* NPE-C contains a crypto accelerator */ |
| 161 |
crypto { |
| 162 |
compatible = "intel,ixp4xx-crypto"; |
| 163 |
intel,npe-handle = <&npe 2>; |
| 164 |
queue-rx = <&qmgr 30>; |
| 165 |
queue-txready = <&qmgr 29>; |
| 166 |
}; |
| 167 |
}; |
| 168 |
|
| 169 |
/* This is known as EthB */ |
| 170 |
ethernet@c8009000 { |
| 171 |
compatible = "intel,ixp4xx-ethernet"; |
| 172 |
reg = <0xc8009000 0x1000>; |
| 173 |
status = "disabled"; |
| 174 |
/* Dummy values that depend on firmware */ |
| 175 |
queue-rx = <&qmgr 3>; |
| 176 |
queue-txready = <&qmgr 20>; |
| 177 |
intel,npe-handle = <&npe 1>; |
| 178 |
}; |
| 179 |
|
| 180 |
/* This is known as EthC */ |
| 181 |
ethernet@c800a000 { |
| 182 |
compatible = "intel,ixp4xx-ethernet"; |
| 183 |
reg = <0xc800a000 0x1000>; |
| 184 |
status = "disabled"; |
| 185 |
/* Dummy values that depend on firmware */ |
| 186 |
queue-rx = <&qmgr 0>; |
| 187 |
queue-txready = <&qmgr 0>; |
| 188 |
intel,npe-handle = <&npe 2>; |
| 189 |
}; |
| 190 |
|
| 191 |
/* This is known as EthA */ |
| 192 |
ethernet@c800c000 { |
| 193 |
compatible = "intel,ixp4xx-ethernet"; |
| 194 |
reg = <0xc800c000 0x1000>; |
| 195 |
status = "disabled"; |
| 196 |
/* Dummy values that depend on firmware */ |
| 197 |
queue-rx = <&qmgr 0>; |
| 198 |
queue-txready = <&qmgr 0>; |
| 199 |
intel,npe-handle = <&npe 0>; |
| 200 |
}; |
| 201 |
}; |
| 202 |
}; |