| 1 |
// SPDX-License-Identifier: ISC |
| 2 |
/* |
| 3 |
* Device Tree file for Intel XScale Network Processors |
| 4 |
* in the IXP45x and IXP46x series. This series has 64 interrupts and adds a |
| 5 |
* few more peripherals over the 42x and 43x series so this extends the |
| 6 |
* basic IXP4xx DTSI. |
| 7 |
*/ |
| 8 |
#include "intel-ixp4xx.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
soc { |
| 12 |
bus@c4000000 { |
| 13 |
compatible = "intel,ixp46x-expansion-bus-controller", "syscon"; |
| 14 |
/* Uses at least up to 0x124 */ |
| 15 |
reg = <0xc4000000 0x1000>; |
| 16 |
}; |
| 17 |
|
| 18 |
rng@70002100 { |
| 19 |
compatible = "intel,ixp46x-rng"; |
| 20 |
reg = <0x70002100 4>; |
| 21 |
}; |
| 22 |
|
| 23 |
interrupt-controller@c8003000 { |
| 24 |
compatible = "intel,ixp43x-interrupt"; |
| 25 |
}; |
| 26 |
|
| 27 |
/* |
| 28 |
* This is the USB Device Mode (UDC) controller, which is used |
| 29 |
* to present the IXP4xx as a device on a USB bus. |
| 30 |
*/ |
| 31 |
usb@c800b000 { |
| 32 |
compatible = "intel,ixp4xx-udc"; |
| 33 |
reg = <0xc800b000 0x1000>; |
| 34 |
interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; |
| 35 |
status = "disabled"; |
| 36 |
}; |
| 37 |
|
| 38 |
i2c@c8011000 { |
| 39 |
compatible = "intel,ixp4xx-i2c"; |
| 40 |
reg = <0xc8011000 0x18>; |
| 41 |
interrupts = <33 IRQ_TYPE_LEVEL_HIGH>; |
| 42 |
status = "disabled"; |
| 43 |
}; |
| 44 |
|
| 45 |
/* This is known as EthB1 */ |
| 46 |
ethernet@c800d000 { |
| 47 |
compatible = "intel,ixp4xx-ethernet"; |
| 48 |
reg = <0xc800d000 0x1000>; |
| 49 |
status = "disabled"; |
| 50 |
intel,npe = <1>; |
| 51 |
/* Dummy values that depend on firmware */ |
| 52 |
queue-rx = <&qmgr 0>; |
| 53 |
queue-txready = <&qmgr 0>; |
| 54 |
}; |
| 55 |
|
| 56 |
/* This is known as EthB2 */ |
| 57 |
ethernet@c800e000 { |
| 58 |
compatible = "intel,ixp4xx-ethernet"; |
| 59 |
reg = <0xc800e000 0x1000>; |
| 60 |
status = "disabled"; |
| 61 |
intel,npe = <2>; |
| 62 |
/* Dummy values that depend on firmware */ |
| 63 |
queue-rx = <&qmgr 0>; |
| 64 |
queue-txready = <&qmgr 0>; |
| 65 |
}; |
| 66 |
|
| 67 |
/* This is known as EthB3 */ |
| 68 |
ethernet@c800f000 { |
| 69 |
compatible = "intel,ixp4xx-ethernet"; |
| 70 |
reg = <0xc800f000 0x1000>; |
| 71 |
status = "disabled"; |
| 72 |
intel,npe = <3>; |
| 73 |
/* Dummy values that depend on firmware */ |
| 74 |
queue-rx = <&qmgr 0>; |
| 75 |
queue-txready = <&qmgr 0>; |
| 76 |
}; |
| 77 |
|
| 78 |
ptp-timer@c8010000 { |
| 79 |
compatible = "intel,ixp46x-ptp-timer"; |
| 80 |
reg = <0xc8010000 0x1000>; |
| 81 |
interrupt-parent = <&gpio0>; |
| 82 |
interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>; |
| 83 |
interrupt-names = "master", "slave"; |
| 84 |
}; |
| 85 |
}; |
| 86 |
}; |