| 1 |
// SPDX-License-Identifier: ISC |
| 2 |
/* |
| 3 |
* Device Tree file for Gateway 7001 AP based on IXP422 |
| 4 |
* Derived from boardfiles written by Imre Kaloz |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include "intel-ixp42x.dtsi" |
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "Gateway 7001 AP"; |
| 14 |
compatible = "gateway,7001", "intel,ixp42x"; |
| 15 |
#address-cells = <1>; |
| 16 |
#size-cells = <1>; |
| 17 |
|
| 18 |
memory@0 { |
| 19 |
/* 32 MB SDRAM */ |
| 20 |
device_type = "memory"; |
| 21 |
reg = <0x00000000 0x2000000>; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen { |
| 25 |
bootargs = "console=ttyS0,115200n8"; |
| 26 |
stdout-path = "uart1:115200n8"; |
| 27 |
}; |
| 28 |
|
| 29 |
aliases { |
| 30 |
/* second UART is the primary console */ |
| 31 |
serial0 = &uart1; |
| 32 |
}; |
| 33 |
|
| 34 |
soc { |
| 35 |
bus@c4000000 { |
| 36 |
flash@0,0 { |
| 37 |
compatible = "intel,ixp4xx-flash", "cfi-flash"; |
| 38 |
bank-width = <2>; |
| 39 |
/* |
| 40 |
* 8 MB of flash |
| 41 |
*/ |
| 42 |
reg = <0 0x00000000 0x800000>; |
| 43 |
|
| 44 |
/* Configure expansion bus to allow writes */ |
| 45 |
intel,ixp4xx-eb-write-enable = <1>; |
| 46 |
|
| 47 |
partitions { |
| 48 |
compatible = "redboot-fis"; |
| 49 |
/* Eraseblock at 0x7e0000 */ |
| 50 |
fis-index-block = <0x3f>; |
| 51 |
}; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
pci@c0000000 { |
| 56 |
status = "okay"; |
| 57 |
|
| 58 |
/* |
| 59 |
* Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c) |
| 60 |
* We have slots (IDSEL) 1 and 2 with one assigned IRQ |
| 61 |
* each handling all IRQs. |
| 62 |
*/ |
| 63 |
#interrupt-cells = <1>; |
| 64 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 65 |
interrupt-map = |
| 66 |
/* IDSEL 1 */ |
| 67 |
<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ |
| 68 |
<0x0800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 11 */ |
| 69 |
<0x0800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 11 */ |
| 70 |
<0x0800 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 11 */ |
| 71 |
/* IDSEL 2 */ |
| 72 |
<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */ |
| 73 |
<0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */ |
| 74 |
<0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */ |
| 75 |
<0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */ |
| 76 |
}; |
| 77 |
|
| 78 |
ethernet@c8009000 { |
| 79 |
status = "okay"; |
| 80 |
queue-rx = <&qmgr 3>; |
| 81 |
queue-txready = <&qmgr 20>; |
| 82 |
phy-mode = "rgmii"; |
| 83 |
phy-handle = <&phy1>; |
| 84 |
|
| 85 |
mdio { |
| 86 |
#address-cells = <1>; |
| 87 |
#size-cells = <0>; |
| 88 |
|
| 89 |
phy1: ethernet-phy@1 { |
| 90 |
reg = <1>; |
| 91 |
}; |
| 92 |
}; |
| 93 |
}; |
| 94 |
|
| 95 |
ethernet@c800a000 { |
| 96 |
status = "okay"; |
| 97 |
queue-rx = <&qmgr 4>; |
| 98 |
queue-txready = <&qmgr 21>; |
| 99 |
phy-mode = "rgmii"; |
| 100 |
phy-handle = <&phy2>; |
| 101 |
|
| 102 |
mdio { |
| 103 |
#address-cells = <1>; |
| 104 |
#size-cells = <0>; |
| 105 |
|
| 106 |
phy2: ethernet-phy@2 { |
| 107 |
reg = <2>; |
| 108 |
}; |
| 109 |
}; |
| 110 |
}; |
| 111 |
}; |
| 112 |
}; |