| 1 |
// SPDX-License-Identifier: ISC |
| 2 |
/* |
| 3 |
* Device Tree file for the Goramo MultiLink Router |
| 4 |
* There are two variants: |
| 5 |
* - MultiLink Basic (a box) |
| 6 |
* - MultiLink Max (19" rack mount) |
| 7 |
* This device tree supports MultiLink Basic. |
| 8 |
* This machine is based on IXP425. |
| 9 |
* This is one of the few devices supporting the IXP4xx High-Speed Serial |
| 10 |
* (HSS) link for a V.35 WAN interface. |
| 11 |
* The hardware originates in Poland. |
| 12 |
*/ |
| 13 |
|
| 14 |
/dts-v1/; |
| 15 |
|
| 16 |
#include "intel-ixp42x.dtsi" |
| 17 |
#include <dt-bindings/input/input.h> |
| 18 |
|
| 19 |
/ { |
| 20 |
model = "Goramo MultiLink Router"; |
| 21 |
compatible = "goramo,multilink-router", "intel,ixp42x"; |
| 22 |
#address-cells = <1>; |
| 23 |
#size-cells = <1>; |
| 24 |
|
| 25 |
memory@0 { |
| 26 |
/* |
| 27 |
* 64 MB of RAM according to the manual. The MultiLink |
| 28 |
* Max has 128 MB. |
| 29 |
*/ |
| 30 |
device_type = "memory"; |
| 31 |
reg = <0x00000000 0x4000000>; |
| 32 |
}; |
| 33 |
|
| 34 |
chosen { |
| 35 |
bootargs = "console=ttyS0,115200n8"; |
| 36 |
stdout-path = "uart0:115200n8"; |
| 37 |
}; |
| 38 |
|
| 39 |
aliases { |
| 40 |
serial0 = &uart0; |
| 41 |
serial1 = &uart1; |
| 42 |
}; |
| 43 |
|
| 44 |
/* |
| 45 |
* 74HC4094 which is used as a rudimentary GPIO expander |
| 46 |
* FIXME: |
| 47 |
* - Create device tree bindings for this as GPIO expander |
| 48 |
* - Write a pure DT GPIO driver using these bindings |
| 49 |
* - Support cascading in the style of gpio-74x164.c (cannot be reused, very different) |
| 50 |
*/ |
| 51 |
gpio_74: gpio-74hc4094 { |
| 52 |
compatible = "nxp,74hc4094"; |
| 53 |
cp-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; |
| 54 |
d-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; |
| 55 |
str-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; |
| 56 |
/* oe-gpios is optional */ |
| 57 |
gpio-controller; |
| 58 |
#gpio-cells = <2>; |
| 59 |
/* We are not cascaded */ |
| 60 |
registers-number = <1>; |
| 61 |
gpio-line-names = "CONTROL_HSS0_CLK_INT", "CONTROL_HSS1_CLK_INT", "CONTROL_HSS0_DTR_N", |
| 62 |
"CONTROL_HSS1_DTR_N", "CONTROL_EXT", "CONTROL_AUTO_RESET", |
| 63 |
"CONTROL_PCI_RESET_N", "CONTROL_EEPROM_WC_N"; |
| 64 |
}; |
| 65 |
|
| 66 |
soc { |
| 67 |
bus@c4000000 { |
| 68 |
flash@0,0 { |
| 69 |
compatible = "intel,ixp4xx-flash", "cfi-flash"; |
| 70 |
bank-width = <2>; |
| 71 |
/* Enable writes on the expansion bus */ |
| 72 |
intel,ixp4xx-eb-write-enable = <1>; |
| 73 |
/* 16 MB of Flash mapped in at CS0 */ |
| 74 |
reg = <0 0x00000000 0x1000000>; |
| 75 |
|
| 76 |
partitions { |
| 77 |
compatible = "redboot-fis"; |
| 78 |
/* Eraseblock at 0x0fe0000 */ |
| 79 |
fis-index-block = <0x7f>; |
| 80 |
}; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
pci@c0000000 { |
| 85 |
status = "okay"; |
| 86 |
|
| 87 |
/* |
| 88 |
* The device has 4 slots (IDSEL) with one dedicated IRQ per slot. |
| 89 |
* The slots have Ethernet, Ethernet, NEC and MPCI. |
| 90 |
* The IDSELs are 11, 12, 13, 14. |
| 91 |
*/ |
| 92 |
#interrupt-cells = <1>; |
| 93 |
interrupt-map-mask = <0xf800 0 0 7>; |
| 94 |
interrupt-map = |
| 95 |
/* IDSEL 11 - Ethernet A */ |
| 96 |
<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */ |
| 97 |
<0x5800 0 0 2 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 11 is irq 4 */ |
| 98 |
<0x5800 0 0 3 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 11 is irq 4 */ |
| 99 |
<0x5800 0 0 4 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 11 is irq 4 */ |
| 100 |
/* IDSEL 12 - Ethernet B */ |
| 101 |
<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */ |
| 102 |
<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */ |
| 103 |
<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */ |
| 104 |
<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */ |
| 105 |
/* IDSEL 13 - MPCI */ |
| 106 |
<0x6800 0 0 1 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 12 */ |
| 107 |
<0x6800 0 0 2 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 12 */ |
| 108 |
<0x6800 0 0 3 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 12 */ |
| 109 |
<0x6800 0 0 4 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 12 */ |
| 110 |
/* IDSEL 14 - NEC */ |
| 111 |
<0x7000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 3 */ |
| 112 |
<0x7000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 3 */ |
| 113 |
<0x7000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 3 */ |
| 114 |
<0x7000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 3 */ |
| 115 |
}; |
| 116 |
|
| 117 |
/* HSS links */ |
| 118 |
npe@c8006000 { |
| 119 |
hss@0 { |
| 120 |
status = "okay"; |
| 121 |
intel,queue-chl-rxtrig = <&qmgr 12>; |
| 122 |
intel,queue-chl-txready = <&qmgr 34>; |
| 123 |
intel,queue-pkt-rx = <&qmgr 13>; |
| 124 |
intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>; |
| 125 |
intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>; |
| 126 |
intel,queue-pkt-txdone = <&qmgr 22>; |
| 127 |
/* The Goramo GPIO-based clock etc control */ |
| 128 |
cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
| 129 |
rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
| 130 |
dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; |
| 131 |
dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>; |
| 132 |
clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>; |
| 133 |
}; |
| 134 |
hss@1 { |
| 135 |
status = "okay"; |
| 136 |
intel,queue-chl-rxtrig = <&qmgr 10>; |
| 137 |
intel,queue-chl-txready = <&qmgr 35>; |
| 138 |
intel,queue-pkt-rx = <&qmgr 0>; |
| 139 |
intel,queue-pkt-tx = <&qmgr 5>, <&qmgr 6>, <&qmgr 7>, <&qmgr 8>; |
| 140 |
intel,queue-pkt-rxfree = <&qmgr 1>, <&qmgr 2>, <&qmgr 3>, <&qmgr 4>; |
| 141 |
intel,queue-pkt-txdone = <&qmgr 9>; |
| 142 |
/* The Goramo GPIO-based clock etc control */ |
| 143 |
cts-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
| 144 |
rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
| 145 |
dcd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
| 146 |
dtr-gpios = <&gpio_74 3 GPIO_ACTIVE_LOW>; |
| 147 |
clk-internal-gpios = <&gpio_74 1 GPIO_ACTIVE_HIGH>; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
/* EthB */ |
| 152 |
ethernet@c8009000 { |
| 153 |
status = "okay"; |
| 154 |
queue-rx = <&qmgr 3>; |
| 155 |
queue-txready = <&qmgr 32>; |
| 156 |
phy-mode = "rgmii"; |
| 157 |
phy-handle = <&phy0>; |
| 158 |
|
| 159 |
mdio { |
| 160 |
#address-cells = <1>; |
| 161 |
#size-cells = <0>; |
| 162 |
|
| 163 |
phy0: ethernet-phy@0 { |
| 164 |
reg = <0>; |
| 165 |
}; |
| 166 |
|
| 167 |
phy1: ethernet-phy@1 { |
| 168 |
reg = <1>; |
| 169 |
}; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
/* EthC */ |
| 174 |
ethernet@c800a000 { |
| 175 |
status = "okay"; |
| 176 |
queue-rx = <&qmgr 4>; |
| 177 |
queue-txready = <&qmgr 33>; |
| 178 |
phy-mode = "rgmii"; |
| 179 |
phy-handle = <&phy1>; |
| 180 |
}; |
| 181 |
}; |
| 182 |
}; |