| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/dts-v1/; |
| 3 |
#include "aspeed-g5.dtsi" |
| 4 |
#include <dt-bindings/gpio/aspeed-gpio.h> |
| 5 |
|
| 6 |
/ { |
| 7 |
model = "Zaius BMC"; |
| 8 |
compatible = "ingrasys,zaius-bmc", "aspeed,ast2500"; |
| 9 |
|
| 10 |
aliases { |
| 11 |
i2c15 = &i2cpcie0; |
| 12 |
i2c16 = &i2cpcie1; |
| 13 |
i2c17 = &i2cpcie2; |
| 14 |
i2c19 = &i2cpcie3; |
| 15 |
i2c20 = &i2cpcie4; |
| 16 |
}; |
| 17 |
|
| 18 |
chosen { |
| 19 |
stdout-path = &uart5; |
| 20 |
bootargs = "console=ttyS4,115200 earlycon"; |
| 21 |
}; |
| 22 |
|
| 23 |
memory@80000000 { |
| 24 |
reg = <0x80000000 0x40000000>; |
| 25 |
}; |
| 26 |
|
| 27 |
reserved-memory { |
| 28 |
#address-cells = <1>; |
| 29 |
#size-cells = <1>; |
| 30 |
ranges; |
| 31 |
|
| 32 |
flash_memory: region@98000000 { |
| 33 |
no-map; |
| 34 |
reg = <0x98000000 0x04000000>; /* 64M */ |
| 35 |
}; |
| 36 |
}; |
| 37 |
|
| 38 |
onewire0 { |
| 39 |
compatible = "w1-gpio"; |
| 40 |
gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>; |
| 41 |
}; |
| 42 |
|
| 43 |
onewire1 { |
| 44 |
compatible = "w1-gpio"; |
| 45 |
gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>; |
| 46 |
}; |
| 47 |
|
| 48 |
onewire2 { |
| 49 |
compatible = "w1-gpio"; |
| 50 |
gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; |
| 51 |
}; |
| 52 |
|
| 53 |
onewire3 { |
| 54 |
compatible = "w1-gpio"; |
| 55 |
gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>; |
| 56 |
}; |
| 57 |
|
| 58 |
gpio-keys { |
| 59 |
compatible = "gpio-keys"; |
| 60 |
|
| 61 |
event-checkstop { |
| 62 |
label = "checkstop"; |
| 63 |
gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>; |
| 64 |
linux,code = <ASPEED_GPIO(F, 7)>; |
| 65 |
}; |
| 66 |
|
| 67 |
event-pcie-e2b-present { |
| 68 |
label = "pcie-e2b-present"; |
| 69 |
gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>; |
| 70 |
linux,code = <ASPEED_GPIO(E, 7)>; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
leds { |
| 75 |
compatible = "gpio-leds"; |
| 76 |
|
| 77 |
sys_boot_status { |
| 78 |
label = "System boot status"; |
| 79 |
gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>; |
| 80 |
}; |
| 81 |
|
| 82 |
attention { |
| 83 |
label = "Attention"; |
| 84 |
gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>; |
| 85 |
}; |
| 86 |
|
| 87 |
plt_fault { |
| 88 |
label = "Platform fault"; |
| 89 |
gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>; |
| 90 |
}; |
| 91 |
|
| 92 |
hdd_fault { |
| 93 |
label = "Onboard drive fault"; |
| 94 |
gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
fsi: gpio-fsi { |
| 99 |
compatible = "fsi-master-gpio"; |
| 100 |
#address-cells = <2>; |
| 101 |
#size-cells = <0>; |
| 102 |
no-gpio-delays; |
| 103 |
|
| 104 |
trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>; |
| 105 |
enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; |
| 106 |
clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>; |
| 107 |
data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>; |
| 108 |
mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>; |
| 109 |
}; |
| 110 |
|
| 111 |
iio-hwmon { |
| 112 |
compatible = "iio-hwmon"; |
| 113 |
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, |
| 114 |
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, |
| 115 |
<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, |
| 116 |
<&adc 13>, <&adc 14>, <&adc 15>; |
| 117 |
}; |
| 118 |
|
| 119 |
iio-hwmon-battery { |
| 120 |
compatible = "iio-hwmon"; |
| 121 |
io-channels = <&adc 12>; |
| 122 |
}; |
| 123 |
|
| 124 |
}; |
| 125 |
|
| 126 |
&fmc { |
| 127 |
status = "okay"; |
| 128 |
|
| 129 |
flash@0 { |
| 130 |
status = "okay"; |
| 131 |
label = "bmc"; |
| 132 |
m25p,fast-read; |
| 133 |
spi-max-frequency = <50000000>; |
| 134 |
#include "openbmc-flash-layout.dtsi" |
| 135 |
}; |
| 136 |
}; |
| 137 |
|
| 138 |
&spi1 { |
| 139 |
status = "okay"; |
| 140 |
pinctrl-names = "default"; |
| 141 |
pinctrl-0 = <&pinctrl_spi1_default>; |
| 142 |
|
| 143 |
flash@0 { |
| 144 |
status = "okay"; |
| 145 |
label = "pnor"; |
| 146 |
m25p,fast-read; |
| 147 |
spi-max-frequency = <100000000>; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
&spi2 { |
| 152 |
status = "okay"; |
| 153 |
pinctrl-names = "default"; |
| 154 |
pinctrl-0 = <&pinctrl_spi2ck_default |
| 155 |
&pinctrl_spi2cs0_default |
| 156 |
&pinctrl_spi2cs1_default |
| 157 |
&pinctrl_spi2miso_default |
| 158 |
&pinctrl_spi2mosi_default>; |
| 159 |
|
| 160 |
flash@0 { |
| 161 |
status = "okay"; |
| 162 |
}; |
| 163 |
}; |
| 164 |
|
| 165 |
&uart1 { |
| 166 |
status = "okay"; |
| 167 |
pinctrl-names = "default"; |
| 168 |
pinctrl-0 = <&pinctrl_txd1_default |
| 169 |
&pinctrl_rxd1_default>; |
| 170 |
}; |
| 171 |
|
| 172 |
&lpc_ctrl { |
| 173 |
status = "okay"; |
| 174 |
memory-region = <&flash_memory>; |
| 175 |
flash = <&spi1>; |
| 176 |
}; |
| 177 |
|
| 178 |
&lpc_snoop { |
| 179 |
status = "okay"; |
| 180 |
snoop-ports = <0x80>; |
| 181 |
}; |
| 182 |
|
| 183 |
|
| 184 |
&uart5 { |
| 185 |
status = "okay"; |
| 186 |
}; |
| 187 |
|
| 188 |
&mac0 { |
| 189 |
status = "okay"; |
| 190 |
pinctrl-names = "default"; |
| 191 |
pinctrl-0 = <&pinctrl_rmii1_default>; |
| 192 |
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, |
| 193 |
<&syscon ASPEED_CLK_MAC1RCLK>; |
| 194 |
clock-names = "MACCLK", "RCLK"; |
| 195 |
use-ncsi; |
| 196 |
}; |
| 197 |
|
| 198 |
&mac1 { |
| 199 |
status = "okay"; |
| 200 |
|
| 201 |
pinctrl-names = "default"; |
| 202 |
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; |
| 203 |
}; |
| 204 |
|
| 205 |
&i2c0 { |
| 206 |
status = "okay"; |
| 207 |
|
| 208 |
eeprom@50 { |
| 209 |
compatible = "atmel,24c64"; |
| 210 |
reg = <0x50>; |
| 211 |
pagesize = <32>; |
| 212 |
}; |
| 213 |
|
| 214 |
rtc@68 { |
| 215 |
compatible = "nxp,pcf8523"; |
| 216 |
reg = <0x68>; |
| 217 |
}; |
| 218 |
|
| 219 |
ucd90160@64 { |
| 220 |
compatible = "ti,ucd90160"; |
| 221 |
reg = <0x64>; |
| 222 |
}; |
| 223 |
|
| 224 |
/* Power sequencer UCD90160 PMBUS @64h |
| 225 |
* FRU AT24C64D @50h |
| 226 |
* RTC PCF8523 @68h |
| 227 |
* Clock buffer 9DBL04 @6dh |
| 228 |
*/ |
| 229 |
}; |
| 230 |
|
| 231 |
&i2c1 { |
| 232 |
status = "okay"; |
| 233 |
|
| 234 |
i2c-mux@71 { |
| 235 |
compatible = "nxp,pca9546"; |
| 236 |
reg = <0x71>; |
| 237 |
#address-cells = <1>; |
| 238 |
#size-cells = <0>; |
| 239 |
|
| 240 |
i2cpcie0: i2c@0 { |
| 241 |
#address-cells = <1>; |
| 242 |
#size-cells = <0>; |
| 243 |
reg = <0>; |
| 244 |
}; |
| 245 |
i2cpcie1: i2c@1 { |
| 246 |
#address-cells = <1>; |
| 247 |
#size-cells = <0>; |
| 248 |
reg = <1>; |
| 249 |
}; |
| 250 |
i2cpcie2: i2c@2 { |
| 251 |
#address-cells = <1>; |
| 252 |
#size-cells = <0>; |
| 253 |
reg = <2>; |
| 254 |
}; |
| 255 |
i2ctpm: i2c@3 { |
| 256 |
#address-cells = <1>; |
| 257 |
#size-cells = <0>; |
| 258 |
reg = <3>; |
| 259 |
}; |
| 260 |
}; |
| 261 |
|
| 262 |
/* MUX1 PCA9546A @71h |
| 263 |
* PCIe 0 |
| 264 |
* PCIe 1 |
| 265 |
* PCIe 2 |
| 266 |
* TPM header |
| 267 |
*/ |
| 268 |
}; |
| 269 |
|
| 270 |
&i2c2 { |
| 271 |
status = "disabled"; |
| 272 |
|
| 273 |
/* OCP Mezz Connector A (OOB SMBUS) */ |
| 274 |
}; |
| 275 |
|
| 276 |
&i2c3 { |
| 277 |
status = "disabled"; |
| 278 |
|
| 279 |
/* OCP Mezz Connector A (PCIe slot SMBUS) */ |
| 280 |
}; |
| 281 |
|
| 282 |
&i2c4 { |
| 283 |
status = "okay"; |
| 284 |
|
| 285 |
i2c-mux@71 { |
| 286 |
compatible = "nxp,pca9546"; |
| 287 |
reg = <0x71>; |
| 288 |
#address-cells = <1>; |
| 289 |
#size-cells = <0>; |
| 290 |
|
| 291 |
i2cpcie3: i2c@0 { |
| 292 |
#address-cells = <1>; |
| 293 |
#size-cells = <0>; |
| 294 |
reg = <0>; |
| 295 |
}; |
| 296 |
i2cpcie4: i2c@1 { |
| 297 |
#address-cells = <1>; |
| 298 |
#size-cells = <0>; |
| 299 |
reg = <1>; |
| 300 |
}; |
| 301 |
}; |
| 302 |
|
| 303 |
/* MUX1 PCA9546A @71h |
| 304 |
* PCIe 3 |
| 305 |
* PCIe 4 |
| 306 |
*/ |
| 307 |
}; |
| 308 |
|
| 309 |
|
| 310 |
&i2c5 { |
| 311 |
status = "disabled"; |
| 312 |
|
| 313 |
/* CPU0 PRM 0.7V */ |
| 314 |
/* CPU0 PRM 1.2V CH03 */ |
| 315 |
/* CPU0 PRM 0.8V */ |
| 316 |
/* CPU0 PRM 1.2V CH47 */ |
| 317 |
}; |
| 318 |
|
| 319 |
&i2c6 { |
| 320 |
status = "disabled"; |
| 321 |
|
| 322 |
/* CPU1 PRM 0.7V */ |
| 323 |
/* CPU1 PRM 1.2V CH03 */ |
| 324 |
/* CPU1 PRM 0.8V */ |
| 325 |
/* CPU1 PRM 1.2V CH47 */ |
| 326 |
}; |
| 327 |
|
| 328 |
&i2c7 { |
| 329 |
status = "okay"; |
| 330 |
|
| 331 |
pca9541a@70 { |
| 332 |
compatible = "nxp,pca9541"; |
| 333 |
reg = <0x70>; |
| 334 |
|
| 335 |
i2c-arb { |
| 336 |
#address-cells = <1>; |
| 337 |
#size-cells = <0>; |
| 338 |
|
| 339 |
hotswap@54 { |
| 340 |
compatible = "ti,lm5066i"; |
| 341 |
reg = <0x54>; |
| 342 |
}; |
| 343 |
}; |
| 344 |
|
| 345 |
}; |
| 346 |
|
| 347 |
vrm@64 { |
| 348 |
compatible = "isil,isl68137"; |
| 349 |
reg = <0x64>; |
| 350 |
}; |
| 351 |
|
| 352 |
vrm@40 { |
| 353 |
compatible = "isil,isl68137"; |
| 354 |
reg = <0x40>; |
| 355 |
}; |
| 356 |
|
| 357 |
vrm@60 { |
| 358 |
compatible = "isil,isl68137"; |
| 359 |
reg = <0x60>; |
| 360 |
}; |
| 361 |
|
| 362 |
vrm@43 { |
| 363 |
compatible = "infineon,ir38064"; |
| 364 |
reg = <0x43>; |
| 365 |
}; |
| 366 |
|
| 367 |
vrm@41 { |
| 368 |
compatible = "isil,isl68137"; |
| 369 |
reg = <0x41>; |
| 370 |
}; |
| 371 |
|
| 372 |
/* Master selector PCA9541A @70h (other master: CPU0) |
| 373 |
* LM5066I PMBUS @10h |
| 374 |
*/ |
| 375 |
|
| 376 |
/* |
| 377 |
* Brick will be one of these types/addresses. Depending |
| 378 |
* on the board SKU only one is actually present and will successfully |
| 379 |
* instantiate while the others will fail the probe operation. |
| 380 |
* These are the PVT (and presumably beyond) addresses: |
| 381 |
* 12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah |
| 382 |
* 12V Quarter Brick DC/DC Converter Q54SH12050 @30h |
| 383 |
*/ |
| 384 |
power-brick@6a { |
| 385 |
compatible = "delta,dps800"; |
| 386 |
reg = <0x6a>; |
| 387 |
}; |
| 388 |
power-brick@30 { |
| 389 |
compatible = "delta,dps800"; |
| 390 |
reg = <0x30>; |
| 391 |
}; |
| 392 |
|
| 393 |
/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */ |
| 394 |
/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */ |
| 395 |
/* CPU0 VR ISL68137 0.8V PMBUS @60h */ |
| 396 |
/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */ |
| 397 |
/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */ |
| 398 |
/* Master selector PCA9541A @70h (other master: CPU0) |
| 399 |
* LM5066I PMBUS @10h |
| 400 |
*/ |
| 401 |
}; |
| 402 |
|
| 403 |
&i2c8 { |
| 404 |
status = "okay"; |
| 405 |
|
| 406 |
vrm@64 { |
| 407 |
compatible = "isil,isl68137"; |
| 408 |
reg = <0x64>; |
| 409 |
}; |
| 410 |
|
| 411 |
vrm@40 { |
| 412 |
compatible = "isil,isl68137"; |
| 413 |
reg = <0x40>; |
| 414 |
}; |
| 415 |
|
| 416 |
vrm@41 { |
| 417 |
compatible = "isil,isl68137"; |
| 418 |
reg = <0x41>; |
| 419 |
}; |
| 420 |
|
| 421 |
vrm@42 { |
| 422 |
compatible = "infineon,ir38064"; |
| 423 |
reg = <0x42>; |
| 424 |
}; |
| 425 |
|
| 426 |
vrm@60 { |
| 427 |
compatible = "isil,isl68137"; |
| 428 |
reg = <0x60>; |
| 429 |
}; |
| 430 |
|
| 431 |
/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */ |
| 432 |
/* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */ |
| 433 |
/* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */ |
| 434 |
/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */ |
| 435 |
/* CPU1 VR ISL68137 0.8V PMBUS @60h */ |
| 436 |
}; |
| 437 |
|
| 438 |
|
| 439 |
&i2c9 { |
| 440 |
status = "disabled"; |
| 441 |
|
| 442 |
/* Fan board */ |
| 443 |
}; |
| 444 |
|
| 445 |
&i2c10 { |
| 446 |
status = "disabled"; |
| 447 |
}; |
| 448 |
|
| 449 |
&i2c11 { |
| 450 |
status = "disabled"; |
| 451 |
|
| 452 |
/* GPU sideband */ |
| 453 |
}; |
| 454 |
|
| 455 |
&i2c12 { |
| 456 |
status = "disabled"; |
| 457 |
}; |
| 458 |
|
| 459 |
&i2c13 { |
| 460 |
status = "disabled"; |
| 461 |
|
| 462 |
/* MUX PI3USB102 |
| 463 |
* CPU0 debug |
| 464 |
* CPU1 debug |
| 465 |
*/ |
| 466 |
}; |
| 467 |
|
| 468 |
&pinctrl { |
| 469 |
pinctrl_gpioh_unbiased: gpioi_unbiased { |
| 470 |
pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7"; |
| 471 |
bias-disable; |
| 472 |
}; |
| 473 |
}; |
| 474 |
|
| 475 |
&gpio { |
| 476 |
pinctrl-names = "default"; |
| 477 |
pinctrl-0 = <&pinctrl_gpioh_unbiased>; |
| 478 |
|
| 479 |
gpio-line-names = |
| 480 |
/*A0-A7*/ "","cfam-reset","","","","","","", |
| 481 |
/*B0-B7*/ "","","","","","","","", |
| 482 |
/*C0-C7*/ "","","","","","","","", |
| 483 |
/*D0-D7*/ "fsi-enable","","","","","led-sys-boot-status","led-attention", |
| 484 |
"led-fault", |
| 485 |
/*E0-E7*/ "","","","","","","","presence-pcie-e2b", |
| 486 |
/*F0-F7*/ "","","","","","","","checkstop", |
| 487 |
/*G0-G7*/ "fsi-clock","fsi-data","","","","","","", |
| 488 |
/*H0-H7*/ "onewire0","onewire1","onewire2","onewire3","","","","", |
| 489 |
/*I0-I7*/ "","","","power-button","","","","", |
| 490 |
/*J0-J7*/ "","","","","","","","", |
| 491 |
/*K0-K7*/ "","","","","","","","", |
| 492 |
/*L0-L7*/ "","","","","","","","", |
| 493 |
/*M0-M7*/ "","","","","","","","", |
| 494 |
/*N0-N7*/ "","","","","","","","", |
| 495 |
/*O0-O7*/ "","","","","iso_u164_en","","fsi-trans","", |
| 496 |
/*P0-P7*/ "ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","", |
| 497 |
"","fsi-mux","", |
| 498 |
/*Q0-Q7*/ "","","","","","","","", |
| 499 |
/*R0-R7*/ "","","","","","","","", |
| 500 |
/*S0-S7*/ "","","","","","","","", |
| 501 |
/*T0-T7*/ "","","","","","","","", |
| 502 |
/*U0-U7*/ "","","","","","","","", |
| 503 |
/*V0-V7*/ "","","","","","","","", |
| 504 |
/*W0-W7*/ "","","","","","","","", |
| 505 |
/*X0-X7*/ "","","","","","","","", |
| 506 |
/*Y0-Y7*/ "","","","","","","","", |
| 507 |
/*Z0-Z7*/ "","","","","","","","", |
| 508 |
/*AA0-AA7*/ "","","led-hdd-fault","","","","","", |
| 509 |
/*AB0-AB7*/ "","","","","","","","", |
| 510 |
/*AC0-AC7*/ "","","","","","","",""; |
| 511 |
|
| 512 |
line-iso-u146-en-hog { |
| 513 |
gpio-hog; |
| 514 |
gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>; |
| 515 |
output-high; |
| 516 |
}; |
| 517 |
|
| 518 |
ncsi-mux-en-n-hog { |
| 519 |
gpio-hog; |
| 520 |
gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; |
| 521 |
output-low; |
| 522 |
}; |
| 523 |
|
| 524 |
line-bmc-i2c2-sw-rst-n-hog { |
| 525 |
gpio-hog; |
| 526 |
gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; |
| 527 |
output-high; |
| 528 |
}; |
| 529 |
|
| 530 |
line-bmc-i2c5-sw-rst-n-hog { |
| 531 |
gpio-hog; |
| 532 |
gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; |
| 533 |
output-high; |
| 534 |
}; |
| 535 |
}; |
| 536 |
|
| 537 |
&vuart { |
| 538 |
status = "okay"; |
| 539 |
}; |
| 540 |
|
| 541 |
&gfx { |
| 542 |
status = "okay"; |
| 543 |
}; |
| 544 |
|
| 545 |
&pwm_tacho { |
| 546 |
status = "okay"; |
| 547 |
pinctrl-names = "default"; |
| 548 |
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default |
| 549 |
&pinctrl_pwm2_default &pinctrl_pwm3_default>; |
| 550 |
|
| 551 |
fan@0 { |
| 552 |
reg = <0x00>; |
| 553 |
aspeed,fan-tach-ch = /bits/ 8 <0x00>; |
| 554 |
}; |
| 555 |
|
| 556 |
fan@1 { |
| 557 |
reg = <0x01>; |
| 558 |
aspeed,fan-tach-ch = /bits/ 8 <0x01>; |
| 559 |
}; |
| 560 |
|
| 561 |
fan@2 { |
| 562 |
reg = <0x02>; |
| 563 |
aspeed,fan-tach-ch = /bits/ 8 <0x02>; |
| 564 |
}; |
| 565 |
|
| 566 |
fan@3 { |
| 567 |
reg = <0x03>; |
| 568 |
aspeed,fan-tach-ch = /bits/ 8 <0x03>; |
| 569 |
}; |
| 570 |
}; |
| 571 |
|
| 572 |
&ibt { |
| 573 |
status = "okay"; |
| 574 |
}; |
| 575 |
|
| 576 |
#include "ibm-power9-dual.dtsi" |