| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
// Copyright 2021 Inventec Corp. |
| 3 |
|
| 4 |
/dts-v1/; |
| 5 |
|
| 6 |
#include "aspeed-g6.dtsi" |
| 7 |
#include "aspeed-g6-pinctrl.dtsi" |
| 8 |
#include <dt-bindings/i2c/i2c.h> |
| 9 |
#include <dt-bindings/gpio/aspeed-gpio.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "TRANSFORMERS BMC"; |
| 13 |
compatible = "inventec,transformer-bmc", "aspeed,ast2600"; |
| 14 |
|
| 15 |
aliases { |
| 16 |
serial4 = &uart5; |
| 17 |
}; |
| 18 |
|
| 19 |
chosen { |
| 20 |
stdout-path = &uart5; |
| 21 |
bootargs = "console=ttyS4,115200n8"; |
| 22 |
}; |
| 23 |
|
| 24 |
memory@80000000 { |
| 25 |
device_type = "memory"; |
| 26 |
reg = <0x80000000 0x80000000>; |
| 27 |
}; |
| 28 |
|
| 29 |
leds { |
| 30 |
compatible = "gpio-leds"; |
| 31 |
|
| 32 |
// UID led |
| 33 |
uid { |
| 34 |
label = "UID_LED"; |
| 35 |
gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>; |
| 36 |
}; |
| 37 |
|
| 38 |
// Heart beat led |
| 39 |
heartbeat { |
| 40 |
label = "HB_LED"; |
| 41 |
gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; |
| 42 |
}; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
&mdio0 { |
| 47 |
status = "okay"; |
| 48 |
|
| 49 |
ethphy0: ethernet-phy@0 { |
| 50 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 51 |
reg = <1>; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
&mac3 { |
| 56 |
status = "okay"; |
| 57 |
phy-mode = "rgmii"; |
| 58 |
phy-handle = <ðphy0>; |
| 59 |
pinctrl-names = "default"; |
| 60 |
pinctrl-0 = <&pinctrl_rgmii4_default>; |
| 61 |
}; |
| 62 |
|
| 63 |
&fmc { |
| 64 |
status = "okay"; |
| 65 |
|
| 66 |
flash@0 { |
| 67 |
status = "okay"; |
| 68 |
m25p,fast-read; |
| 69 |
label = "bmc"; |
| 70 |
spi-max-frequency = <33000000>; |
| 71 |
spi-tx-bus-width = <2>; |
| 72 |
spi-rx-bus-width = <2>; |
| 73 |
#include "openbmc-flash-layout.dtsi" |
| 74 |
}; |
| 75 |
|
| 76 |
flash@1 { |
| 77 |
status = "okay"; |
| 78 |
m25p,fast-read; |
| 79 |
label = "bmc2"; |
| 80 |
spi-max-frequency = <33000000>; |
| 81 |
spi-tx-bus-width = <2>; |
| 82 |
spi-rx-bus-width = <2>; |
| 83 |
}; |
| 84 |
}; |
| 85 |
|
| 86 |
&spi1 { |
| 87 |
status = "okay"; |
| 88 |
pinctrl-names = "default"; |
| 89 |
pinctrl-0 = <&pinctrl_spi1_default>; |
| 90 |
|
| 91 |
flash@0 { |
| 92 |
status = "okay"; |
| 93 |
m25p,fast-read; |
| 94 |
label = "bios"; |
| 95 |
spi-max-frequency = <33000000>; |
| 96 |
spi-tx-bus-width = <1>; |
| 97 |
spi-rx-bus-width = <1>; |
| 98 |
}; |
| 99 |
}; |
| 100 |
|
| 101 |
&wdt1 { |
| 102 |
status = "okay"; |
| 103 |
}; |
| 104 |
|
| 105 |
&uart1 { |
| 106 |
status = "okay"; |
| 107 |
}; |
| 108 |
|
| 109 |
&uart5 { |
| 110 |
status = "okay"; |
| 111 |
}; |
| 112 |
|
| 113 |
&i2c0 { |
| 114 |
status = "okay"; |
| 115 |
|
| 116 |
//Set bmc' slave address; |
| 117 |
bmc_slave@10 { |
| 118 |
compatible = "ipmb-dev"; |
| 119 |
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; |
| 120 |
i2c-protocol; |
| 121 |
}; |
| 122 |
}; |
| 123 |
|
| 124 |
&i2c2 { |
| 125 |
status = "okay"; |
| 126 |
}; |
| 127 |
|
| 128 |
&i2c3 { |
| 129 |
// FRU AT24C512C-SSHM-T |
| 130 |
status = "okay"; |
| 131 |
eeprom@50 { |
| 132 |
compatible = "atmel,24c512"; |
| 133 |
reg = <0x50>; |
| 134 |
pagesize = <128>; |
| 135 |
}; |
| 136 |
}; |
| 137 |
|
| 138 |
&i2c5 { |
| 139 |
status = "okay"; |
| 140 |
}; |
| 141 |
|
| 142 |
&i2c6 { |
| 143 |
status = "okay"; |
| 144 |
|
| 145 |
tmp75@49 { |
| 146 |
compatible = "ti,tmp75"; |
| 147 |
reg = <0x49>; |
| 148 |
}; |
| 149 |
|
| 150 |
tmp75@4f { |
| 151 |
compatible = "ti,tmp75"; |
| 152 |
reg = <0x4f>; |
| 153 |
}; |
| 154 |
|
| 155 |
tmp468@48 { |
| 156 |
compatible = "ti,tmp468"; |
| 157 |
reg = <0x48>; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
&i2c7 { |
| 162 |
status = "okay"; |
| 163 |
adm1278@40 { |
| 164 |
compatible = "adi,adm1278"; |
| 165 |
reg = <0x40>; |
| 166 |
}; |
| 167 |
}; |
| 168 |
|
| 169 |
|
| 170 |
&i2c8 { |
| 171 |
// FRU AT24C512C-SSHM-T |
| 172 |
status = "okay"; |
| 173 |
|
| 174 |
eeprom@51 { |
| 175 |
compatible = "atmel,24c512"; |
| 176 |
reg = <0x51>; |
| 177 |
pagesize = <128>; |
| 178 |
}; |
| 179 |
|
| 180 |
eeprom@53 { |
| 181 |
compatible = "atmel,24c512"; |
| 182 |
reg = <0x53>; |
| 183 |
pagesize = <128>; |
| 184 |
}; |
| 185 |
}; |
| 186 |
|
| 187 |
&i2c9 { |
| 188 |
// M.2 |
| 189 |
status = "okay"; |
| 190 |
}; |
| 191 |
|
| 192 |
&i2c10 { |
| 193 |
// I2C EXPANDER |
| 194 |
status = "okay"; |
| 195 |
|
| 196 |
i2c-mux@71 { |
| 197 |
compatible = "nxp,pca9544"; |
| 198 |
#address-cells = <1>; |
| 199 |
#size-cells = <0>; |
| 200 |
reg = <0x71>; |
| 201 |
}; |
| 202 |
|
| 203 |
i2c-mux@73 { |
| 204 |
compatible = "nxp,pca9544"; |
| 205 |
#address-cells = <1>; |
| 206 |
#size-cells = <0>; |
| 207 |
reg = <0x73>; |
| 208 |
}; |
| 209 |
}; |
| 210 |
|
| 211 |
&i2c11 { |
| 212 |
// I2C EXPANDER |
| 213 |
status = "okay"; |
| 214 |
|
| 215 |
i2c-mux@70 { |
| 216 |
compatible = "nxp,pca9544"; |
| 217 |
#address-cells = <1>; |
| 218 |
#size-cells = <0>; |
| 219 |
reg = <0x70>; |
| 220 |
|
| 221 |
pcie_eeprom_riser1: i2c@0 { |
| 222 |
#address-cells = <1>; |
| 223 |
#size-cells = <0>; |
| 224 |
reg = <0>; |
| 225 |
|
| 226 |
eeprom@55 { |
| 227 |
compatible = "atmel,24c512"; |
| 228 |
reg = <0x55>; |
| 229 |
pagesize = <128>; |
| 230 |
}; |
| 231 |
}; |
| 232 |
|
| 233 |
pcie_eeprom_riser2: i2c@1 { |
| 234 |
#address-cells = <1>; |
| 235 |
#size-cells = <0>; |
| 236 |
reg = <1>; |
| 237 |
|
| 238 |
eeprom@55 { |
| 239 |
compatible = "atmel,24c512"; |
| 240 |
reg = <0x55>; |
| 241 |
pagesize = <128>; |
| 242 |
}; |
| 243 |
}; |
| 244 |
|
| 245 |
pcie_eeprom_riser3: i2c@2 { |
| 246 |
#address-cells = <1>; |
| 247 |
#size-cells = <0>; |
| 248 |
reg = <2>; |
| 249 |
|
| 250 |
eeprom@55 { |
| 251 |
compatible = "atmel,24c512"; |
| 252 |
reg = <0x55>; |
| 253 |
pagesize = <128>; |
| 254 |
}; |
| 255 |
}; |
| 256 |
}; |
| 257 |
}; |
| 258 |
|
| 259 |
&i2c12 { |
| 260 |
status = "okay"; |
| 261 |
|
| 262 |
psu0:psu0@58 { |
| 263 |
compatible = "pmbus"; |
| 264 |
reg = <0x58>; |
| 265 |
}; |
| 266 |
}; |
| 267 |
|
| 268 |
&gpio0 { |
| 269 |
status = "okay"; |
| 270 |
gpio-line-names = |
| 271 |
/*A0-A7*/ "","","","","","","","", |
| 272 |
/*B0-B7*/ "presence-ps0","power-chassis-good","","","","","presence-ps1","", |
| 273 |
/*C0-C7*/ "","","","","","","","", |
| 274 |
/*D0-D7*/ "","","","","","","","", |
| 275 |
/*E0-E7*/ "","","","","","","","", |
| 276 |
/*F0-F7*/ "","","","","power-chassis-control","","","", |
| 277 |
/*G0-G7*/ "","","jtag-mux","","","","","", |
| 278 |
/*H0-H7*/ "","","","","reset-button","power-button","","", |
| 279 |
/*I0-I7*/ "","","","","","","","", |
| 280 |
/*J0-J7*/ "","","","","","","","", |
| 281 |
/*K0-K7*/ "","","","","","","","", |
| 282 |
/*L0-L7*/ "","","","","","","","", |
| 283 |
/*M0-M7*/ "","","","","","","","", |
| 284 |
/*N0-N7*/ "","","","","","","","", |
| 285 |
/*O0-O7*/ "","","","","","","","", |
| 286 |
/*P0-P7*/ "","","","tck-mux","","","","", |
| 287 |
/*Q0-Q7*/ "","","","","","","","", |
| 288 |
/*R0-R7*/ "","","","","","","","", |
| 289 |
/*S0-S7*/ "","","","","","","","", |
| 290 |
/*T0-T7*/ "","","","","","","","", |
| 291 |
/*U0-U7*/ "","nmi-button","","","","","","", |
| 292 |
/*V0-V7*/ "","","","","power-config-full-load","","","", |
| 293 |
/*W0-W7*/ "","","","","","","","", |
| 294 |
/*X0-X7*/ "","","","","","","","", |
| 295 |
/*Y0-Y7*/ "","","","","","","","", |
| 296 |
/*Z0-Z7*/ "","","","","","","","", |
| 297 |
/*AA0-AA7*/ "","","","","","","","", |
| 298 |
/*AB0-AB7*/ "","","","","","","","", |
| 299 |
/*AC0-AC7*/ "","","","","","","",""; |
| 300 |
}; |
| 301 |
|
| 302 |
&lpc_snoop { |
| 303 |
status = "okay"; |
| 304 |
snoop-ports = <0x80>; |
| 305 |
}; |
| 306 |
|
| 307 |
&emmc_controller { |
| 308 |
status = "okay"; |
| 309 |
}; |
| 310 |
|
| 311 |
&emmc { |
| 312 |
status = "okay"; |
| 313 |
non-removable; |
| 314 |
max-frequency = <52000000>; |
| 315 |
bus-width = <8>; |
| 316 |
}; |
| 317 |
|
| 318 |
&vhub { |
| 319 |
status = "okay"; |
| 320 |
aspeed,vhub-downstream-ports = <7>; |
| 321 |
aspeed,vhub-generic-endpoints = <21>; |
| 322 |
pinctrl-names = "default"; |
| 323 |
pinctrl-0 = <&pinctrl_usb2ad_default>; |
| 324 |
}; |
| 325 |
|
| 326 |
&rtc { |
| 327 |
status = "okay"; |
| 328 |
}; |