Debian Codegraph @

arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts

raw
1 // SPDX-License-Identifier: GPL-2.0+
2 // Copyright 2019 YADRO
3 /dts-v1/;
4 #include "aspeed-g5.dtsi"
5 #include <dt-bindings/gpio/aspeed-gpio.h>
6
7 / {
8 model = "Nicole BMC";
9 compatible = "yadro,nicole-bmc", "aspeed,ast2500";
10
11 chosen {
12 stdout-path = &uart5;
13 bootargs = "console=ttyS4,115200 earlycon";
14 };
15
16 memory@80000000 {
17 reg = <0x80000000 0x20000000>;
18 };
19
20 reserved-memory {
21 #address-cells = <1>;
22 #size-cells = <1>;
23 ranges;
24
25 vga_memory: framebuffer@9f000000 {
26 no-map;
27 reg = <0x9f000000 0x01000000>; /* 16M */
28 };
29
30 flash_memory: region@98000000 {
31 no-map;
32 reg = <0x98000000 0x04000000>; /* 64M */
33 };
34
35 coldfire_memory: codefire_memory@9ef00000 {
36 reg = <0x9ef00000 0x00100000>;
37 no-map;
38 };
39
40 gfx_memory: framebuffer {
41 size = <0x01000000>;
42 alignment = <0x01000000>;
43 compatible = "shared-dma-pool";
44 reusable;
45 };
46
47 video_engine_memory: jpegbuffer {
48 size = <0x02000000>; /* 32M */
49 alignment = <0x01000000>;
50 compatible = "shared-dma-pool";
51 reusable;
52 };
53 };
54
55 leds {
56 compatible = "gpio-leds";
57
58 power {
59 label = "platform:green:power";
60 gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
61 };
62
63 identify {
64 label = "platform:blue:indicator";
65 gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
66 };
67
68 fault {
69 label = "platform:red:fault";
70 gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
71 };
72
73 attention {
74 label = "platform:yellow:alarm";
75 gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
76 };
77 };
78
79 fsi: gpio-fsi {
80 compatible = "aspeed,ast2500-cf-fsi-master";
81 #address-cells = <2>;
82 #size-cells = <0>;
83
84 memory-region = <&coldfire_memory>;
85 aspeed,sram = <&sram>;
86 aspeed,cvic = <&cvic>;
87
88 clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
89 data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
90 mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
91 enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
92 trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
93 };
94
95 gpio-keys {
96 compatible = "gpio-keys";
97
98 event-checkstop {
99 label = "checkstop";
100 gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
101 linux,code = <ASPEED_GPIO(J, 2)>;
102 };
103 };
104
105 iio-hwmon-battery {
106 compatible = "iio-hwmon";
107 io-channels = <&adc 12>;
108 };
109 };
110
111 &fmc {
112 status = "okay";
113 flash@0 {
114 status = "okay";
115 m25p,fast-read;
116 label = "bmc";
117 spi-max-frequency = <50000000>;
118 #include "openbmc-flash-layout.dtsi"
119 };
120 };
121
122 &spi1 {
123 status = "okay";
124 pinctrl-names = "default";
125 pinctrl-0 = <&pinctrl_spi1_default>;
126
127 flash@0 {
128 status = "okay";
129 m25p,fast-read;
130 label = "pnor";
131 spi-max-frequency = <100000000>;
132 };
133 };
134
135 &lpc_ctrl {
136 status = "okay";
137 memory-region = <&flash_memory>;
138 flash = <&spi1>;
139 };
140
141 &uart1 {
142 /* Rear RS-232 connector */
143 status = "okay";
144
145 pinctrl-names = "default";
146 pinctrl-0 = <&pinctrl_txd1_default
147 &pinctrl_rxd1_default
148 &pinctrl_nrts1_default
149 &pinctrl_ndtr1_default
150 &pinctrl_ndsr1_default
151 &pinctrl_ncts1_default
152 &pinctrl_ndcd1_default
153 &pinctrl_nri1_default>;
154 };
155
156 &uart5 {
157 status = "okay";
158 };
159
160 &mac0 {
161 status = "okay";
162
163 use-ncsi;
164
165 pinctrl-names = "default";
166 pinctrl-0 = <&pinctrl_rmii1_default>;
167 clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
168 <&syscon ASPEED_CLK_MAC1RCLK>;
169 clock-names = "MACCLK", "RCLK";
170 };
171
172 &i2c0 {
173 status = "okay";
174
175 eeprom@50 {
176 compatible = "atmel,24c256";
177 reg = <0x50>;
178 pagesize = <64>;
179 };
180 };
181
182 &i2c2 {
183 status = "okay";
184 /* CPU0 characterization connector */
185 };
186
187 &i2c3 {
188 status = "okay";
189 /* CLK GEN SI5338 */
190 };
191
192 &i2c4 {
193 status = "okay";
194 /* Voltage regulators for CPU0 */
195 };
196
197 &i2c5 {
198 status = "okay";
199 /* Voltage regulators for CPU1 */
200 };
201
202 &i2c6 {
203 status = "okay";
204
205 rtc@32 {
206 compatible = "epson,rx8900";
207 reg = <0x32>;
208 };
209 };
210
211 &i2c7 {
212 status = "okay";
213 /* CPLD */
214 };
215
216 &gpio {
217 gpio-line-names =
218 /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","",
219 /*B0-B7*/ "","","","","","","","",
220 /*C0-C7*/ "","","","","","","","",
221 /*D0-D7*/ "fsi-enable","bmc_power_up","sys_pwrok_buf",
222 "func_mode0","func_mode1","func_mode2","","",
223 /*E0-E7*/ "","ncsi_cfg","","","","","","",
224 /*F0-F7*/ "","","","","","","","",
225 /*G0-G7*/ "","","","","","","","",
226 /*H0-H7*/ "","","","","","","","",
227 /*I0-I7*/ "","","","","","","","",
228 /*J0-J7*/ "","","checkstop","","","","","",
229 /*K0-K7*/ "","","","","","","","",
230 /*L0-L7*/ "","","","","","","","",
231 /*M0-M7*/ "","","","","","","","",
232 /*N0-N7*/ "","","","","","","","",
233 /*O0-O7*/ "","","power-button","","","","","",
234 /*P0-P7*/ "","fsi-trans","pm_rtc_adc_en","","","","","",
235 /*Q0-Q7*/ "","","","","","","","id-button",
236 /*R0-R7*/ "","software_pwrgood","","","","","","",
237 /*S0-S7*/ "","","","","","","","seq_cont",
238 /*T0-T7*/ "","","","","","","","",
239 /*U0-U7*/ "","","","","","","","",
240 /*V0-V7*/ "","","","","","","","",
241 /*W0-W7*/ "","","","","","","","",
242 /*X0-X7*/ "","","","","","","","",
243 /*Y0-Y7*/ "","","","","","","","",
244 /*Z0-Z7*/ "","","","","","","","",
245 /*AA0-AA7*/ "fsi-clock","led-attention","fsi-data","led-fault",
246 "led-power","","","led-identify",
247 /*AB0-AB7*/ "","","","","","","","",
248 /*AC0-AC7*/ "","","","","","","","";
249
250 func-mode0-hog {
251 gpio-hog;
252 gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
253 output-low;
254 };
255 func-mode1-hog {
256 gpio-hog;
257 gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
258 output-low;
259 };
260 func-mode2-hog {
261 gpio-hog;
262 gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
263 output-low;
264 };
265 seq-cont-hog {
266 gpio-hog;
267 gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
268 output-low;
269 };
270 ncsi-cfg-hog {
271 gpio-hog;
272 input;
273 gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
274 };
275 };
276
277 &vuart {
278 status = "okay";
279 };
280
281 &gfx {
282 status = "okay";
283 memory-region = <&gfx_memory>;
284 };
285
286 &ibt {
287 status = "okay";
288 };
289
290 &vhub {
291 status = "okay";
292 };
293
294 &adc {
295 status = "okay";
296
297 pinctrl-names = "default";
298 pinctrl-0 = <&pinctrl_adc0_default
299 &pinctrl_adc1_default
300 &pinctrl_adc2_default
301 &pinctrl_adc3_default
302 &pinctrl_adc4_default
303 &pinctrl_adc5_default
304 &pinctrl_adc6_default
305 &pinctrl_adc7_default
306 &pinctrl_adc8_default
307 &pinctrl_adc9_default
308 &pinctrl_adc10_default
309 &pinctrl_adc11_default
310 &pinctrl_adc12_default
311 &pinctrl_adc13_default
312 &pinctrl_adc14_default
313 &pinctrl_adc15_default>;
314 };
315
316 &video {
317 status = "okay";
318 memory-region = <&video_engine_memory>;
319 };
320
321 #include "ibm-power9-dual.dtsi"