| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* Device Tree file for Lenovo Hr630 platform |
| 4 |
* |
| 5 |
* Copyright (C) 2019-present Lenovo |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include "aspeed-g5.dtsi" |
| 11 |
#include <dt-bindings/gpio/aspeed-gpio.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "HR630 BMC"; |
| 15 |
compatible = "lenovo,hr630-bmc", "aspeed,ast2500"; |
| 16 |
|
| 17 |
aliases { |
| 18 |
i2c14 = &i2c_rbp; |
| 19 |
i2c15 = &i2c_fbp1; |
| 20 |
i2c16 = &i2c_fbp2; |
| 21 |
i2c17 = &i2c_fbp3; |
| 22 |
i2c18 = &i2c_riser2; |
| 23 |
i2c19 = &i2c_pcie4; |
| 24 |
i2c20 = &i2c_riser1; |
| 25 |
i2c21 = &i2c_ocp; |
| 26 |
}; |
| 27 |
|
| 28 |
chosen { |
| 29 |
stdout-path = &uart5; |
| 30 |
bootargs = "console=tty0 console=ttyS4,115200 earlycon"; |
| 31 |
}; |
| 32 |
|
| 33 |
memory@80000000 { |
| 34 |
device_type = "memory"; |
| 35 |
reg = <0x80000000 0x20000000>; |
| 36 |
}; |
| 37 |
|
| 38 |
reserved-memory { |
| 39 |
#address-cells = <1>; |
| 40 |
#size-cells = <1>; |
| 41 |
ranges; |
| 42 |
|
| 43 |
flash_memory: region@98000000 { |
| 44 |
no-map; |
| 45 |
reg = <0x98000000 0x00100000>; /* 1M */ |
| 46 |
}; |
| 47 |
|
| 48 |
gfx_memory: framebuffer { |
| 49 |
size = <0x01000000>; |
| 50 |
alignment = <0x01000000>; |
| 51 |
compatible = "shared-dma-pool"; |
| 52 |
reusable; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
leds { |
| 57 |
compatible = "gpio-leds"; |
| 58 |
|
| 59 |
heartbeat { |
| 60 |
gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>; |
| 61 |
}; |
| 62 |
|
| 63 |
fault { |
| 64 |
gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; |
| 65 |
}; |
| 66 |
}; |
| 67 |
|
| 68 |
iio-hwmon { |
| 69 |
compatible = "iio-hwmon"; |
| 70 |
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, |
| 71 |
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, |
| 72 |
<&adc 8>, <&adc 9>, <&adc 10>, |
| 73 |
<&adc 12>, <&adc 13>, <&adc 14>; |
| 74 |
}; |
| 75 |
|
| 76 |
}; |
| 77 |
|
| 78 |
&fmc { |
| 79 |
status = "okay"; |
| 80 |
flash@0 { |
| 81 |
status = "okay"; |
| 82 |
m25p,fast-read; |
| 83 |
label = "bmc"; |
| 84 |
spi-max-frequency = <50000000>; |
| 85 |
#include "openbmc-flash-layout.dtsi" |
| 86 |
}; |
| 87 |
}; |
| 88 |
|
| 89 |
&lpc_ctrl { |
| 90 |
status = "okay"; |
| 91 |
memory-region = <&flash_memory>; |
| 92 |
flash = <&spi1>; |
| 93 |
}; |
| 94 |
|
| 95 |
&uart1 { |
| 96 |
status = "okay"; |
| 97 |
pinctrl-names = "default"; |
| 98 |
pinctrl-0 = <&pinctrl_txd1_default |
| 99 |
&pinctrl_rxd1_default>; |
| 100 |
}; |
| 101 |
|
| 102 |
&uart2 { |
| 103 |
/* Rear RS-232 connector */ |
| 104 |
status = "okay"; |
| 105 |
pinctrl-names = "default"; |
| 106 |
pinctrl-0 = <&pinctrl_txd2_default |
| 107 |
&pinctrl_rxd2_default |
| 108 |
&pinctrl_nrts2_default |
| 109 |
&pinctrl_ndtr2_default |
| 110 |
&pinctrl_ndsr2_default |
| 111 |
&pinctrl_ncts2_default |
| 112 |
&pinctrl_ndcd2_default |
| 113 |
&pinctrl_nri2_default>; |
| 114 |
}; |
| 115 |
|
| 116 |
&uart3 { |
| 117 |
status = "okay"; |
| 118 |
pinctrl-names = "default"; |
| 119 |
pinctrl-0 = <&pinctrl_txd3_default |
| 120 |
&pinctrl_rxd3_default>; |
| 121 |
}; |
| 122 |
|
| 123 |
&uart5 { |
| 124 |
status = "okay"; |
| 125 |
}; |
| 126 |
|
| 127 |
&ibt { |
| 128 |
status = "okay"; |
| 129 |
}; |
| 130 |
|
| 131 |
&mac0 { |
| 132 |
status = "okay"; |
| 133 |
|
| 134 |
pinctrl-names = "default"; |
| 135 |
pinctrl-0 = <&pinctrl_rmii1_default>; |
| 136 |
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, |
| 137 |
<&syscon ASPEED_CLK_MAC1RCLK>; |
| 138 |
clock-names = "MACCLK", "RCLK"; |
| 139 |
use-ncsi; |
| 140 |
}; |
| 141 |
|
| 142 |
&mac1 { |
| 143 |
status = "okay"; |
| 144 |
|
| 145 |
pinctrl-names = "default"; |
| 146 |
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; |
| 147 |
}; |
| 148 |
|
| 149 |
&adc { |
| 150 |
status = "okay"; |
| 151 |
|
| 152 |
pinctrl-names = "default"; |
| 153 |
pinctrl-0 = <&pinctrl_adc0_default |
| 154 |
&pinctrl_adc1_default |
| 155 |
&pinctrl_adc2_default |
| 156 |
&pinctrl_adc3_default |
| 157 |
&pinctrl_adc4_default |
| 158 |
&pinctrl_adc5_default |
| 159 |
&pinctrl_adc6_default |
| 160 |
&pinctrl_adc7_default |
| 161 |
&pinctrl_adc8_default |
| 162 |
&pinctrl_adc9_default |
| 163 |
&pinctrl_adc10_default |
| 164 |
&pinctrl_adc12_default |
| 165 |
&pinctrl_adc13_default |
| 166 |
&pinctrl_adc14_default>; |
| 167 |
}; |
| 168 |
|
| 169 |
&i2c0 { |
| 170 |
status = "okay"; |
| 171 |
/* temp1 inlet */ |
| 172 |
tmp75@4e { |
| 173 |
compatible = "national,lm75"; |
| 174 |
reg = <0x4e>; |
| 175 |
}; |
| 176 |
}; |
| 177 |
|
| 178 |
&i2c1 { |
| 179 |
status = "okay"; |
| 180 |
/* temp2 outlet */ |
| 181 |
tmp75@4d { |
| 182 |
compatible = "national,lm75"; |
| 183 |
reg = <0x4d>; |
| 184 |
}; |
| 185 |
}; |
| 186 |
|
| 187 |
&i2c2 { |
| 188 |
status = "okay"; |
| 189 |
}; |
| 190 |
|
| 191 |
&i2c3 { |
| 192 |
status = "okay"; |
| 193 |
}; |
| 194 |
|
| 195 |
&i2c4 { |
| 196 |
status = "okay"; |
| 197 |
}; |
| 198 |
|
| 199 |
&i2c5 { |
| 200 |
status = "okay"; |
| 201 |
}; |
| 202 |
|
| 203 |
&i2c6 { |
| 204 |
status = "okay"; |
| 205 |
/* Slot 0, |
| 206 |
* Slot 1, |
| 207 |
* Slot 2, |
| 208 |
* Slot 3 |
| 209 |
*/ |
| 210 |
|
| 211 |
i2c-mux@70 { |
| 212 |
compatible = "nxp,pca9545"; |
| 213 |
reg = <0x70>; |
| 214 |
#address-cells = <1>; |
| 215 |
#size-cells = <0>; |
| 216 |
i2c-mux-idle-disconnect; /* may use mux@70 next. */ |
| 217 |
|
| 218 |
i2c_rbp: i2c@0 { |
| 219 |
#address-cells = <1>; |
| 220 |
#size-cells = <0>; |
| 221 |
reg = <0>; |
| 222 |
}; |
| 223 |
|
| 224 |
i2c_fbp1: i2c@1 { |
| 225 |
#address-cells = <1>; |
| 226 |
#size-cells = <0>; |
| 227 |
reg = <1>; |
| 228 |
}; |
| 229 |
|
| 230 |
i2c_fbp2: i2c@2 { |
| 231 |
#address-cells = <1>; |
| 232 |
#size-cells = <0>; |
| 233 |
reg = <2>; |
| 234 |
}; |
| 235 |
|
| 236 |
i2c_fbp3: i2c@3 { |
| 237 |
#address-cells = <1>; |
| 238 |
#size-cells = <0>; |
| 239 |
reg = <3>; |
| 240 |
}; |
| 241 |
}; |
| 242 |
}; |
| 243 |
|
| 244 |
&i2c7 { |
| 245 |
status = "okay"; |
| 246 |
|
| 247 |
/* Slot 0, |
| 248 |
* Slot 1, |
| 249 |
* Slot 2, |
| 250 |
* Slot 3 |
| 251 |
*/ |
| 252 |
i2c-mux@76 { |
| 253 |
compatible = "nxp,pca9546"; |
| 254 |
reg = <0x76>; |
| 255 |
#address-cells = <1>; |
| 256 |
#size-cells = <0>; |
| 257 |
i2c-mux-idle-disconnect; /* may use mux@76 next. */ |
| 258 |
|
| 259 |
i2c_riser2: i2c@0 { |
| 260 |
#address-cells = <1>; |
| 261 |
#size-cells = <0>; |
| 262 |
reg = <0>; |
| 263 |
}; |
| 264 |
|
| 265 |
i2c_pcie4: i2c@1 { |
| 266 |
#address-cells = <1>; |
| 267 |
#size-cells = <0>; |
| 268 |
reg = <1>; |
| 269 |
}; |
| 270 |
|
| 271 |
i2c_riser1: i2c@2 { |
| 272 |
#address-cells = <1>; |
| 273 |
#size-cells = <0>; |
| 274 |
reg = <2>; |
| 275 |
}; |
| 276 |
|
| 277 |
i2c_ocp: i2c@3 { |
| 278 |
#address-cells = <1>; |
| 279 |
#size-cells = <0>; |
| 280 |
reg = <3>; |
| 281 |
}; |
| 282 |
}; |
| 283 |
}; |
| 284 |
|
| 285 |
&i2c8 { |
| 286 |
status = "okay"; |
| 287 |
|
| 288 |
eeprom@57 { |
| 289 |
compatible = "atmel,24c256"; |
| 290 |
reg = <0x57>; |
| 291 |
pagesize = <16>; |
| 292 |
}; |
| 293 |
}; |
| 294 |
|
| 295 |
&i2c9 { |
| 296 |
status = "okay"; |
| 297 |
}; |
| 298 |
|
| 299 |
&i2c10 { |
| 300 |
status = "okay"; |
| 301 |
}; |
| 302 |
|
| 303 |
&i2c11 { |
| 304 |
status = "okay"; |
| 305 |
}; |
| 306 |
|
| 307 |
&i2c12 { |
| 308 |
status = "okay"; |
| 309 |
}; |
| 310 |
|
| 311 |
&ehci1 { |
| 312 |
status = "okay"; |
| 313 |
}; |
| 314 |
|
| 315 |
&uhci { |
| 316 |
status = "okay"; |
| 317 |
}; |
| 318 |
|
| 319 |
&gfx { |
| 320 |
status = "okay"; |
| 321 |
memory-region = <&gfx_memory>; |
| 322 |
}; |
| 323 |
|
| 324 |
&pwm_tacho { |
| 325 |
status = "okay"; |
| 326 |
pinctrl-names = "default"; |
| 327 |
pinctrl-0 = <&pinctrl_pwm0_default |
| 328 |
&pinctrl_pwm1_default |
| 329 |
&pinctrl_pwm2_default |
| 330 |
&pinctrl_pwm3_default |
| 331 |
&pinctrl_pwm4_default |
| 332 |
&pinctrl_pwm5_default |
| 333 |
&pinctrl_pwm6_default>; |
| 334 |
|
| 335 |
fan@0 { |
| 336 |
reg = <0x00>; |
| 337 |
aspeed,fan-tach-ch = /bits/ 8 <0x00>; |
| 338 |
}; |
| 339 |
|
| 340 |
fan@1 { |
| 341 |
reg = <0x00>; |
| 342 |
aspeed,fan-tach-ch = /bits/ 8 <0x01>; |
| 343 |
}; |
| 344 |
|
| 345 |
fan@2 { |
| 346 |
reg = <0x01>; |
| 347 |
aspeed,fan-tach-ch = /bits/ 8 <0x02>; |
| 348 |
}; |
| 349 |
|
| 350 |
fan@3 { |
| 351 |
reg = <0x01>; |
| 352 |
aspeed,fan-tach-ch = /bits/ 8 <0x03>; |
| 353 |
}; |
| 354 |
|
| 355 |
fan@4 { |
| 356 |
reg = <0x02>; |
| 357 |
aspeed,fan-tach-ch = /bits/ 8 <0x04>; |
| 358 |
}; |
| 359 |
|
| 360 |
fan@5 { |
| 361 |
reg = <0x02>; |
| 362 |
aspeed,fan-tach-ch = /bits/ 8 <0x05>; |
| 363 |
}; |
| 364 |
|
| 365 |
fan@6 { |
| 366 |
reg = <0x03>; |
| 367 |
aspeed,fan-tach-ch = /bits/ 8 <0x06>; |
| 368 |
}; |
| 369 |
|
| 370 |
fan@7 { |
| 371 |
reg = <0x03>; |
| 372 |
aspeed,fan-tach-ch = /bits/ 8 <0x07>; |
| 373 |
}; |
| 374 |
|
| 375 |
fan@8 { |
| 376 |
reg = <0x04>; |
| 377 |
aspeed,fan-tach-ch = /bits/ 8 <0x08>; |
| 378 |
}; |
| 379 |
|
| 380 |
fan@9 { |
| 381 |
reg = <0x04>; |
| 382 |
aspeed,fan-tach-ch = /bits/ 8 <0x09>; |
| 383 |
}; |
| 384 |
|
| 385 |
fan@10 { |
| 386 |
reg = <0x05>; |
| 387 |
aspeed,fan-tach-ch = /bits/ 8 <0x0a>; |
| 388 |
}; |
| 389 |
|
| 390 |
fan@11 { |
| 391 |
reg = <0x05>; |
| 392 |
aspeed,fan-tach-ch = /bits/ 8 <0x0b>; |
| 393 |
}; |
| 394 |
|
| 395 |
fan@12 { |
| 396 |
reg = <0x06>; |
| 397 |
aspeed,fan-tach-ch = /bits/ 8 <0x0c>; |
| 398 |
}; |
| 399 |
|
| 400 |
fan@13 { |
| 401 |
reg = <0x06>; |
| 402 |
aspeed,fan-tach-ch = /bits/ 8 <0x0d>; |
| 403 |
}; |
| 404 |
}; |
| 405 |
|
| 406 |
&gpio { |
| 407 |
|
| 408 |
pin-gpio-b5-hog { |
| 409 |
gpio-hog; |
| 410 |
gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; |
| 411 |
output-high; |
| 412 |
line-name = "IRQ_BMC_PCH_SMI_LPC_N"; |
| 413 |
}; |
| 414 |
|
| 415 |
pin-gpio-f0-hog { |
| 416 |
gpio-hog; |
| 417 |
gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>; |
| 418 |
output-low; |
| 419 |
line-name = "IRQ_BMC_PCH_NMI_R"; |
| 420 |
}; |
| 421 |
|
| 422 |
pin-gpio-f3-hog { |
| 423 |
gpio-hog; |
| 424 |
gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>; |
| 425 |
output-high; |
| 426 |
line-name = "I2C_BUS0_RST_OUT_N"; |
| 427 |
}; |
| 428 |
|
| 429 |
pin-gpio-f4-hog { |
| 430 |
gpio-hog; |
| 431 |
gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>; |
| 432 |
output-low; |
| 433 |
line-name = "FM_SKT0_FAULT_LED"; |
| 434 |
}; |
| 435 |
|
| 436 |
pin-gpio-f5-hog { |
| 437 |
gpio-hog; |
| 438 |
gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>; |
| 439 |
output-low; |
| 440 |
line-name = "FM_SKT1_FAULT_LED"; |
| 441 |
}; |
| 442 |
|
| 443 |
pin-gpio-g4-hog { |
| 444 |
gpio-hog; |
| 445 |
gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>; |
| 446 |
output-high; |
| 447 |
line-name = "FAN_PWR_CTL_N"; |
| 448 |
}; |
| 449 |
|
| 450 |
pin-gpio-g7-hog { |
| 451 |
gpio-hog; |
| 452 |
gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>; |
| 453 |
output-high; |
| 454 |
line-name = "RST_BMC_PCIE_I2CMUX_N"; |
| 455 |
}; |
| 456 |
|
| 457 |
pin-gpio-h2-hog { |
| 458 |
gpio-hog; |
| 459 |
gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; |
| 460 |
output-high; |
| 461 |
line-name = "PSU1_FFS_N_R"; |
| 462 |
}; |
| 463 |
|
| 464 |
pin-gpio-h3-hog { |
| 465 |
gpio-hog; |
| 466 |
gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>; |
| 467 |
output-high; |
| 468 |
line-name = "PSU2_FFS_N_R"; |
| 469 |
}; |
| 470 |
|
| 471 |
pin-gpio-i3-hog { |
| 472 |
gpio-hog; |
| 473 |
gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; |
| 474 |
output-high; |
| 475 |
line-name = "BMC_INTRUDED_COVER"; |
| 476 |
}; |
| 477 |
|
| 478 |
pin-gpio-j2-hog { |
| 479 |
gpio-hog; |
| 480 |
gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>; |
| 481 |
output-high; |
| 482 |
line-name = "BMC_BIOS_UPDATE_N"; |
| 483 |
}; |
| 484 |
|
| 485 |
pin-gpio-j3-hog { |
| 486 |
gpio-hog; |
| 487 |
gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>; |
| 488 |
output-high; |
| 489 |
line-name = "RST_BMC_HDD_I2CMUX_N"; |
| 490 |
}; |
| 491 |
|
| 492 |
pin-gpio-s2-hog { |
| 493 |
gpio-hog; |
| 494 |
gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>; |
| 495 |
output-high; |
| 496 |
line-name = "BMC_VGA_SW"; |
| 497 |
}; |
| 498 |
|
| 499 |
pin-gpio-s4-hog { |
| 500 |
gpio-hog; |
| 501 |
gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>; |
| 502 |
output; |
| 503 |
line-name = "VBAT_EN_N"; |
| 504 |
}; |
| 505 |
|
| 506 |
pin-gpio-s6-hog { |
| 507 |
gpio-hog; |
| 508 |
gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>; |
| 509 |
output-high; |
| 510 |
line-name = "PU_BMC_GPIOS6"; |
| 511 |
}; |
| 512 |
|
| 513 |
pin-gpio-y0-hog { |
| 514 |
gpio-hog; |
| 515 |
gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>; |
| 516 |
output-low; |
| 517 |
line-name = "BMC_NCSI_MUX_CTL_S0"; |
| 518 |
}; |
| 519 |
|
| 520 |
pin-gpio-y1-hog { |
| 521 |
gpio-hog; |
| 522 |
gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>; |
| 523 |
output-low; |
| 524 |
line-name = "BMC_NCSI_MUX_CTL_S1"; |
| 525 |
}; |
| 526 |
|
| 527 |
pin-gpio-z0-hog { |
| 528 |
gpio-hog; |
| 529 |
gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>; |
| 530 |
output-high; |
| 531 |
line-name = "I2C_RISER2_INT_N"; |
| 532 |
}; |
| 533 |
|
| 534 |
pin-gpio-z2-hog { |
| 535 |
gpio-hog; |
| 536 |
gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; |
| 537 |
output-high; |
| 538 |
line-name = "I2C_RISER2_RESET_N"; |
| 539 |
}; |
| 540 |
|
| 541 |
pin-gpio-z3-hog { |
| 542 |
gpio-hog; |
| 543 |
gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; |
| 544 |
output-high; |
| 545 |
line-name = "FM_BMC_PCH_SCI_LPC_N"; |
| 546 |
}; |
| 547 |
|
| 548 |
pin-gpio-z7-hog { |
| 549 |
gpio-hog; |
| 550 |
gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>; |
| 551 |
output-low; |
| 552 |
line-name = "BMC_POST_CMPLT_N"; |
| 553 |
}; |
| 554 |
|
| 555 |
pin-gpio-aa0-hog { |
| 556 |
gpio-hog; |
| 557 |
gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; |
| 558 |
output-low; |
| 559 |
line-name = "HOST_BMC_USB_SEL"; |
| 560 |
}; |
| 561 |
|
| 562 |
pin-gpio-aa5-hog { |
| 563 |
gpio-hog; |
| 564 |
gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>; |
| 565 |
output-high; |
| 566 |
line-name = "I2C_BUS1_RST_OUT_N"; |
| 567 |
}; |
| 568 |
|
| 569 |
}; |