| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/dts-v1/; |
| 3 |
#include "aspeed-g5.dtsi" |
| 4 |
#include <dt-bindings/gpio/aspeed-gpio.h> |
| 5 |
#include <dt-bindings/leds/leds-pca955x.h> |
| 6 |
|
| 7 |
/ { |
| 8 |
model = "Mowgli BMC"; |
| 9 |
compatible = "ibm,mowgli-bmc", "aspeed,ast2500"; |
| 10 |
|
| 11 |
|
| 12 |
chosen { |
| 13 |
stdout-path = &uart5; |
| 14 |
bootargs = "console=ttyS4,115200 earlycon"; |
| 15 |
}; |
| 16 |
|
| 17 |
memory@80000000 { |
| 18 |
reg = <0x80000000 0x20000000>; |
| 19 |
}; |
| 20 |
|
| 21 |
reserved-memory { |
| 22 |
#address-cells = <1>; |
| 23 |
#size-cells = <1>; |
| 24 |
ranges; |
| 25 |
|
| 26 |
flash_memory: region@98000000 { |
| 27 |
no-map; |
| 28 |
reg = <0x98000000 0x04000000>; /* 64M */ |
| 29 |
}; |
| 30 |
|
| 31 |
gfx_memory: framebuffer { |
| 32 |
size = <0x01000000>; |
| 33 |
alignment = <0x01000000>; |
| 34 |
compatible = "shared-dma-pool"; |
| 35 |
reusable; |
| 36 |
}; |
| 37 |
|
| 38 |
video_engine_memory: jpegbuffer { |
| 39 |
size = <0x02000000>; |
| 40 |
alignment = <0x01000000>; |
| 41 |
compatible = "shared-dma-pool"; |
| 42 |
reusable; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
gpio-keys { |
| 47 |
compatible = "gpio-keys"; |
| 48 |
|
| 49 |
event-air-water { |
| 50 |
label = "air-water"; |
| 51 |
gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; |
| 52 |
linux,code = <ASPEED_GPIO(F, 6)>; |
| 53 |
}; |
| 54 |
|
| 55 |
event-checkstop { |
| 56 |
label = "checkstop"; |
| 57 |
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; |
| 58 |
linux,code = <ASPEED_GPIO(J, 2)>; |
| 59 |
}; |
| 60 |
|
| 61 |
event-ps0-presence { |
| 62 |
label = "ps0-presence"; |
| 63 |
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; |
| 64 |
linux,code = <ASPEED_GPIO(Z, 2)>; |
| 65 |
}; |
| 66 |
|
| 67 |
event-ps1-presence { |
| 68 |
label = "ps1-presence"; |
| 69 |
gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; |
| 70 |
linux,code = <ASPEED_GPIO(Z, 0)>; |
| 71 |
}; |
| 72 |
|
| 73 |
button-id { |
| 74 |
label = "id-button"; |
| 75 |
gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; |
| 76 |
linux,code = <ASPEED_GPIO(F, 1)>; |
| 77 |
}; |
| 78 |
}; |
| 79 |
|
| 80 |
gpio-keys-polled { |
| 81 |
compatible = "gpio-keys-polled"; |
| 82 |
poll-interval = <1000>; |
| 83 |
|
| 84 |
event-fan0-presence { |
| 85 |
label = "fan0-presence"; |
| 86 |
gpios = <&pca9552 9 GPIO_ACTIVE_LOW>; |
| 87 |
linux,code = <9>; |
| 88 |
}; |
| 89 |
|
| 90 |
event-fan1-presence { |
| 91 |
label = "fan1-presence"; |
| 92 |
gpios = <&pca9552 10 GPIO_ACTIVE_LOW>; |
| 93 |
linux,code = <10>; |
| 94 |
}; |
| 95 |
|
| 96 |
event-fan2-presence { |
| 97 |
label = "fan2-presence"; |
| 98 |
gpios = <&pca9552 11 GPIO_ACTIVE_LOW>; |
| 99 |
linux,code = <11>; |
| 100 |
}; |
| 101 |
|
| 102 |
event-fan3-presence { |
| 103 |
label = "fan3-presence"; |
| 104 |
gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; |
| 105 |
linux,code = <12>; |
| 106 |
}; |
| 107 |
|
| 108 |
event-fan4-presence { |
| 109 |
label = "fan4-presence"; |
| 110 |
gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; |
| 111 |
linux,code = <13>; |
| 112 |
}; |
| 113 |
}; |
| 114 |
|
| 115 |
leds { |
| 116 |
compatible = "gpio-leds"; |
| 117 |
|
| 118 |
front-fault { |
| 119 |
retain-state-shutdown; |
| 120 |
default-state = "keep"; |
| 121 |
gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>; |
| 122 |
}; |
| 123 |
|
| 124 |
power-button { |
| 125 |
retain-state-shutdown; |
| 126 |
default-state = "keep"; |
| 127 |
gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>; |
| 128 |
}; |
| 129 |
|
| 130 |
front-id { |
| 131 |
retain-state-shutdown; |
| 132 |
default-state = "keep"; |
| 133 |
gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; |
| 134 |
}; |
| 135 |
|
| 136 |
fan0 { |
| 137 |
retain-state-shutdown; |
| 138 |
default-state = "keep"; |
| 139 |
gpios = <&pca9552 0 GPIO_ACTIVE_LOW>; |
| 140 |
}; |
| 141 |
|
| 142 |
fan1 { |
| 143 |
retain-state-shutdown; |
| 144 |
default-state = "keep"; |
| 145 |
gpios = <&pca9552 1 GPIO_ACTIVE_LOW>; |
| 146 |
}; |
| 147 |
|
| 148 |
fan2 { |
| 149 |
retain-state-shutdown; |
| 150 |
default-state = "keep"; |
| 151 |
gpios = <&pca9552 2 GPIO_ACTIVE_LOW>; |
| 152 |
}; |
| 153 |
|
| 154 |
fan3 { |
| 155 |
retain-state-shutdown; |
| 156 |
default-state = "keep"; |
| 157 |
gpios = <&pca9552 3 GPIO_ACTIVE_LOW>; |
| 158 |
}; |
| 159 |
|
| 160 |
fan4 { |
| 161 |
retain-state-shutdown; |
| 162 |
default-state = "keep"; |
| 163 |
gpios = <&pca9552 4 GPIO_ACTIVE_LOW>; |
| 164 |
}; |
| 165 |
}; |
| 166 |
|
| 167 |
fsi: gpio-fsi { |
| 168 |
compatible = "fsi-master-gpio"; |
| 169 |
#address-cells = <2>; |
| 170 |
#size-cells = <0>; |
| 171 |
no-gpio-delays; |
| 172 |
|
| 173 |
clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>; |
| 174 |
data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>; |
| 175 |
mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; |
| 176 |
enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; |
| 177 |
trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>; |
| 178 |
}; |
| 179 |
|
| 180 |
iio-hwmon-12v { |
| 181 |
compatible = "iio-hwmon"; |
| 182 |
io-channels = <&adc 0>; |
| 183 |
}; |
| 184 |
|
| 185 |
iio-hwmon-5v { |
| 186 |
compatible = "iio-hwmon"; |
| 187 |
io-channels = <&adc 1>; |
| 188 |
}; |
| 189 |
|
| 190 |
iio-hwmon-3v { |
| 191 |
compatible = "iio-hwmon"; |
| 192 |
io-channels = <&adc 2>; |
| 193 |
}; |
| 194 |
|
| 195 |
iio-hwmon-vdd { |
| 196 |
compatible = "iio-hwmon"; |
| 197 |
io-channels = <&adc 3>; |
| 198 |
}; |
| 199 |
|
| 200 |
iio-hwmon-vcs { |
| 201 |
compatible = "iio-hwmon"; |
| 202 |
io-channels = <&adc 5>; |
| 203 |
}; |
| 204 |
|
| 205 |
iio-hwmon-vdn { |
| 206 |
compatible = "iio-hwmon"; |
| 207 |
io-channels = <&adc 7>; |
| 208 |
}; |
| 209 |
|
| 210 |
iio-hwmon-vio { |
| 211 |
compatible = "iio-hwmon"; |
| 212 |
io-channels = <&adc 9>; |
| 213 |
}; |
| 214 |
|
| 215 |
iio-hwmon-vddra { |
| 216 |
compatible = "iio-hwmon"; |
| 217 |
io-channels = <&adc 11>; |
| 218 |
}; |
| 219 |
|
| 220 |
iio-hwmon-battery { |
| 221 |
compatible = "iio-hwmon"; |
| 222 |
io-channels = <&adc 12>; |
| 223 |
}; |
| 224 |
|
| 225 |
iio-hwmon-vddrb { |
| 226 |
compatible = "iio-hwmon"; |
| 227 |
io-channels = <&adc 13>; |
| 228 |
}; |
| 229 |
}; |
| 230 |
|
| 231 |
&pwm_tacho { |
| 232 |
status = "okay"; |
| 233 |
pinctrl-names = "default"; |
| 234 |
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default |
| 235 |
&pinctrl_pwm2_default &pinctrl_pwm3_default |
| 236 |
&pinctrl_pwm4_default>; |
| 237 |
|
| 238 |
fan@0 { |
| 239 |
reg = <0x00>; |
| 240 |
aspeed,fan-tach-ch = /bits/ 8 <0x00>; |
| 241 |
}; |
| 242 |
|
| 243 |
fan@1 { |
| 244 |
reg = <0x01>; |
| 245 |
aspeed,fan-tach-ch = /bits/ 8 <0x01>; |
| 246 |
}; |
| 247 |
|
| 248 |
fan@2 { |
| 249 |
reg = <0x02>; |
| 250 |
aspeed,fan-tach-ch = /bits/ 8 <0x02>; |
| 251 |
}; |
| 252 |
|
| 253 |
fan@3 { |
| 254 |
reg = <0x03>; |
| 255 |
aspeed,fan-tach-ch = /bits/ 8 <0x03>; |
| 256 |
}; |
| 257 |
|
| 258 |
fan@4 { |
| 259 |
reg = <0x04>; |
| 260 |
aspeed,fan-tach-ch = /bits/ 8 <0x04>; |
| 261 |
}; |
| 262 |
|
| 263 |
fan@5 { |
| 264 |
reg = <0x00>; |
| 265 |
aspeed,fan-tach-ch = /bits/ 8 <0x05>; |
| 266 |
}; |
| 267 |
|
| 268 |
fan@6 { |
| 269 |
reg = <0x01>; |
| 270 |
aspeed,fan-tach-ch = /bits/ 8 <0x06>; |
| 271 |
}; |
| 272 |
|
| 273 |
fan@7 { |
| 274 |
reg = <0x02>; |
| 275 |
aspeed,fan-tach-ch = /bits/ 8 <0x07>; |
| 276 |
}; |
| 277 |
|
| 278 |
fan@8 { |
| 279 |
reg = <0x03>; |
| 280 |
aspeed,fan-tach-ch = /bits/ 8 <0x08>; |
| 281 |
}; |
| 282 |
|
| 283 |
fan@9 { |
| 284 |
reg = <0x04>; |
| 285 |
aspeed,fan-tach-ch = /bits/ 8 <0x09>; |
| 286 |
}; |
| 287 |
}; |
| 288 |
|
| 289 |
&fmc { |
| 290 |
status = "okay"; |
| 291 |
flash@0 { |
| 292 |
status = "okay"; |
| 293 |
label = "bmc"; |
| 294 |
m25p,fast-read; |
| 295 |
spi-max-frequency = <50000000>; |
| 296 |
partitions { |
| 297 |
#address-cells = < 1 >; |
| 298 |
#size-cells = < 1 >; |
| 299 |
compatible = "fixed-partitions"; |
| 300 |
u-boot@0 { |
| 301 |
reg = < 0 0x60000 >; |
| 302 |
label = "u-boot"; |
| 303 |
}; |
| 304 |
u-boot-env@60000 { |
| 305 |
reg = < 0x60000 0x20000 >; |
| 306 |
label = "u-boot-env"; |
| 307 |
}; |
| 308 |
obmc-ubi@80000 { |
| 309 |
reg = < 0x80000 0x1F80000 >; |
| 310 |
label = "obmc-ubi"; |
| 311 |
}; |
| 312 |
}; |
| 313 |
}; |
| 314 |
flash@1 { |
| 315 |
status = "okay"; |
| 316 |
label = "alt-bmc"; |
| 317 |
m25p,fast-read; |
| 318 |
spi-max-frequency = <50000000>; |
| 319 |
partitions { |
| 320 |
#address-cells = < 1 >; |
| 321 |
#size-cells = < 1 >; |
| 322 |
compatible = "fixed-partitions"; |
| 323 |
u-boot@0 { |
| 324 |
reg = < 0 0x60000 >; |
| 325 |
label = "alt-u-boot"; |
| 326 |
}; |
| 327 |
u-boot-env@60000 { |
| 328 |
reg = < 0x60000 0x20000 >; |
| 329 |
label = "alt-u-boot-env"; |
| 330 |
}; |
| 331 |
obmc-ubi@80000 { |
| 332 |
reg = < 0x80000 0x1F80000 >; |
| 333 |
label = "alt-obmc-ubi"; |
| 334 |
}; |
| 335 |
}; |
| 336 |
}; |
| 337 |
}; |
| 338 |
|
| 339 |
&spi1 { |
| 340 |
status = "okay"; |
| 341 |
pinctrl-names = "default"; |
| 342 |
pinctrl-0 = <&pinctrl_spi1_default>; |
| 343 |
|
| 344 |
flash@0 { |
| 345 |
status = "okay"; |
| 346 |
label = "pnor"; |
| 347 |
m25p,fast-read; |
| 348 |
spi-max-frequency = <100000000>; |
| 349 |
}; |
| 350 |
}; |
| 351 |
|
| 352 |
&lpc_ctrl { |
| 353 |
status = "okay"; |
| 354 |
memory-region = <&flash_memory>; |
| 355 |
flash = <&spi1>; |
| 356 |
}; |
| 357 |
|
| 358 |
&uart1 { |
| 359 |
/* Rear RS-232 connector */ |
| 360 |
status = "okay"; |
| 361 |
|
| 362 |
pinctrl-names = "default"; |
| 363 |
pinctrl-0 = <&pinctrl_txd1_default |
| 364 |
&pinctrl_rxd1_default |
| 365 |
&pinctrl_nrts1_default |
| 366 |
&pinctrl_ndtr1_default |
| 367 |
&pinctrl_ndsr1_default |
| 368 |
&pinctrl_ncts1_default |
| 369 |
&pinctrl_ndcd1_default |
| 370 |
&pinctrl_nri1_default>; |
| 371 |
}; |
| 372 |
|
| 373 |
&uart2 { |
| 374 |
/* APSS */ |
| 375 |
status = "okay"; |
| 376 |
|
| 377 |
pinctrl-names = "default"; |
| 378 |
pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; |
| 379 |
}; |
| 380 |
|
| 381 |
&uart5 { |
| 382 |
status = "okay"; |
| 383 |
}; |
| 384 |
|
| 385 |
&mac0 { |
| 386 |
status = "okay"; |
| 387 |
|
| 388 |
pinctrl-names = "default"; |
| 389 |
pinctrl-0 = <&pinctrl_rmii1_default>; |
| 390 |
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, |
| 391 |
<&syscon ASPEED_CLK_MAC1RCLK>; |
| 392 |
clock-names = "MACCLK", "RCLK"; |
| 393 |
use-ncsi; |
| 394 |
}; |
| 395 |
|
| 396 |
&mac1 { |
| 397 |
status = "okay"; |
| 398 |
|
| 399 |
pinctrl-names = "default"; |
| 400 |
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; |
| 401 |
}; |
| 402 |
|
| 403 |
&i2c0 { |
| 404 |
status = "okay"; |
| 405 |
|
| 406 |
tmp275@48 { |
| 407 |
compatible = "ti,tmp275"; |
| 408 |
reg = <0x48>; |
| 409 |
}; |
| 410 |
}; |
| 411 |
|
| 412 |
&i2c1 { |
| 413 |
status = "disabled"; |
| 414 |
}; |
| 415 |
|
| 416 |
&i2c2 { |
| 417 |
status = "okay"; |
| 418 |
|
| 419 |
/* CPU MFG CONN */ |
| 420 |
|
| 421 |
}; |
| 422 |
|
| 423 |
&i2c3 { |
| 424 |
status = "okay"; |
| 425 |
|
| 426 |
/* APSS */ |
| 427 |
/* CPLD */ |
| 428 |
|
| 429 |
/* PCA9516 (repeater) -> |
| 430 |
* CLK Buffer 9FGS9092 |
| 431 |
* Power Supply 0 |
| 432 |
* Power Supply 1 |
| 433 |
* PCA 9552 LED |
| 434 |
*/ |
| 435 |
|
| 436 |
pca9552: pca9552@60 { |
| 437 |
compatible = "nxp,pca9552"; |
| 438 |
reg = <0x60>; |
| 439 |
#address-cells = <1>; |
| 440 |
#size-cells = <0>; |
| 441 |
gpio-controller; |
| 442 |
#gpio-cells = <2>; |
| 443 |
|
| 444 |
gpio@0 { |
| 445 |
reg = <0>; |
| 446 |
type = <PCA955X_TYPE_GPIO>; |
| 447 |
}; |
| 448 |
gpio@1 { |
| 449 |
reg = <1>; |
| 450 |
type = <PCA955X_TYPE_GPIO>; |
| 451 |
}; |
| 452 |
gpio@2 { |
| 453 |
reg = <2>; |
| 454 |
type = <PCA955X_TYPE_GPIO>; |
| 455 |
}; |
| 456 |
gpio@3 { |
| 457 |
reg = <3>; |
| 458 |
type = <PCA955X_TYPE_GPIO>; |
| 459 |
}; |
| 460 |
gpio@4 { |
| 461 |
reg = <4>; |
| 462 |
type = <PCA955X_TYPE_GPIO>; |
| 463 |
}; |
| 464 |
gpio@5 { |
| 465 |
reg = <5>; |
| 466 |
type = <PCA955X_TYPE_GPIO>; |
| 467 |
}; |
| 468 |
gpio@6 { |
| 469 |
reg = <6>; |
| 470 |
type = <PCA955X_TYPE_GPIO>; |
| 471 |
}; |
| 472 |
gpio@7 { |
| 473 |
reg = <7>; |
| 474 |
type = <PCA955X_TYPE_GPIO>; |
| 475 |
}; |
| 476 |
gpio@8 { |
| 477 |
reg = <8>; |
| 478 |
type = <PCA955X_TYPE_GPIO>; |
| 479 |
}; |
| 480 |
gpio@9 { |
| 481 |
reg = <9>; |
| 482 |
type = <PCA955X_TYPE_GPIO>; |
| 483 |
}; |
| 484 |
gpio@10 { |
| 485 |
reg = <10>; |
| 486 |
type = <PCA955X_TYPE_GPIO>; |
| 487 |
}; |
| 488 |
gpio@11 { |
| 489 |
reg = <11>; |
| 490 |
type = <PCA955X_TYPE_GPIO>; |
| 491 |
}; |
| 492 |
gpio@12 { |
| 493 |
reg = <12>; |
| 494 |
type = <PCA955X_TYPE_GPIO>; |
| 495 |
}; |
| 496 |
gpio@13 { |
| 497 |
reg = <13>; |
| 498 |
type = <PCA955X_TYPE_GPIO>; |
| 499 |
}; |
| 500 |
gpio@14 { |
| 501 |
reg = <14>; |
| 502 |
type = <PCA955X_TYPE_GPIO>; |
| 503 |
}; |
| 504 |
gpio@15 { |
| 505 |
reg = <15>; |
| 506 |
type = <PCA955X_TYPE_GPIO>; |
| 507 |
}; |
| 508 |
}; |
| 509 |
|
| 510 |
power-supply@68 { |
| 511 |
compatible = "ibm,cffps1"; |
| 512 |
reg = <0x68>; |
| 513 |
}; |
| 514 |
|
| 515 |
power-supply@69 { |
| 516 |
compatible = "ibm,cffps1"; |
| 517 |
reg = <0x69>; |
| 518 |
}; |
| 519 |
}; |
| 520 |
|
| 521 |
&i2c4 { |
| 522 |
status = "okay"; |
| 523 |
|
| 524 |
/* CP0 VDD & VCS : IR35221 */ |
| 525 |
/* CP0 VDN & VIO : IR35221 */ |
| 526 |
/* CP0 VDDR : IR35221 */ |
| 527 |
|
| 528 |
ir35221@28 { |
| 529 |
compatible = "infineon,ir35221"; |
| 530 |
reg = <0x28>; |
| 531 |
}; |
| 532 |
|
| 533 |
ir35221@29 { |
| 534 |
compatible = "infineon,ir35221"; |
| 535 |
reg = <0x29>; |
| 536 |
}; |
| 537 |
|
| 538 |
ir35221@2d { |
| 539 |
compatible = "infineon,ir35221"; |
| 540 |
reg = <0x2d>; |
| 541 |
}; |
| 542 |
|
| 543 |
}; |
| 544 |
|
| 545 |
&i2c5 { |
| 546 |
status = "disabled"; |
| 547 |
}; |
| 548 |
|
| 549 |
&i2c6 { |
| 550 |
status = "disabled"; |
| 551 |
}; |
| 552 |
|
| 553 |
&i2c7 { |
| 554 |
status = "disabled"; |
| 555 |
}; |
| 556 |
|
| 557 |
&i2c8 { |
| 558 |
status = "okay"; |
| 559 |
|
| 560 |
eeprom@50 { |
| 561 |
compatible = "atmel,24c64"; |
| 562 |
reg = <0x50>; |
| 563 |
}; |
| 564 |
}; |
| 565 |
|
| 566 |
&i2c9 { |
| 567 |
status = "okay"; |
| 568 |
|
| 569 |
/* PCIe G3 x16 slot */ |
| 570 |
}; |
| 571 |
|
| 572 |
&i2c10 { |
| 573 |
status = "disabled"; |
| 574 |
}; |
| 575 |
|
| 576 |
&i2c11 { |
| 577 |
status = "okay"; |
| 578 |
|
| 579 |
/* CPLD */ |
| 580 |
/* TPM */ |
| 581 |
/* RTC RX8900CE */ |
| 582 |
/* TMP275A */ |
| 583 |
/* TMP275A */ |
| 584 |
|
| 585 |
rtc@32 { |
| 586 |
compatible = "epson,rx8900"; |
| 587 |
reg = <0x32>; |
| 588 |
}; |
| 589 |
|
| 590 |
tmp275@48 { |
| 591 |
compatible = "ti,tmp275"; |
| 592 |
reg = <0x48>; |
| 593 |
}; |
| 594 |
|
| 595 |
tmp275@49 { |
| 596 |
compatible = "ti,tmp275"; |
| 597 |
reg = <0x49>; |
| 598 |
}; |
| 599 |
|
| 600 |
}; |
| 601 |
|
| 602 |
&i2c12 { |
| 603 |
status = "disabled"; |
| 604 |
}; |
| 605 |
|
| 606 |
&i2c13 { |
| 607 |
status = "disabled"; |
| 608 |
}; |
| 609 |
|
| 610 |
&vuart { |
| 611 |
status = "okay"; |
| 612 |
}; |
| 613 |
|
| 614 |
&gfx { |
| 615 |
status = "okay"; |
| 616 |
memory-region = <&gfx_memory>; |
| 617 |
}; |
| 618 |
|
| 619 |
&adc { |
| 620 |
status = "okay"; |
| 621 |
pinctrl-names = "default"; |
| 622 |
pinctrl-0 = <&pinctrl_adc0_default |
| 623 |
&pinctrl_adc1_default |
| 624 |
&pinctrl_adc2_default |
| 625 |
&pinctrl_adc3_default |
| 626 |
&pinctrl_adc4_default |
| 627 |
&pinctrl_adc5_default |
| 628 |
&pinctrl_adc6_default |
| 629 |
&pinctrl_adc7_default |
| 630 |
&pinctrl_adc8_default |
| 631 |
&pinctrl_adc9_default |
| 632 |
&pinctrl_adc10_default |
| 633 |
&pinctrl_adc11_default |
| 634 |
&pinctrl_adc12_default |
| 635 |
&pinctrl_adc13_default |
| 636 |
&pinctrl_adc14_default |
| 637 |
&pinctrl_adc15_default>; |
| 638 |
}; |
| 639 |
|
| 640 |
&wdt1 { |
| 641 |
aspeed,reset-type = "none"; |
| 642 |
aspeed,external-signal; |
| 643 |
aspeed,ext-push-pull; |
| 644 |
aspeed,ext-active-high; |
| 645 |
|
| 646 |
pinctrl-names = "default"; |
| 647 |
pinctrl-0 = <&pinctrl_wdtrst1_default>; |
| 648 |
}; |
| 649 |
|
| 650 |
&wdt2 { |
| 651 |
aspeed,alt-boot; |
| 652 |
}; |
| 653 |
|
| 654 |
&ibt { |
| 655 |
status = "okay"; |
| 656 |
}; |
| 657 |
|
| 658 |
&vhub { |
| 659 |
status = "okay"; |
| 660 |
}; |
| 661 |
|
| 662 |
&video { |
| 663 |
status = "okay"; |
| 664 |
memory-region = <&video_engine_memory>; |
| 665 |
}; |
| 666 |
|
| 667 |
#include "ibm-power9-dual.dtsi" |