| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
// Copyright 2019 IBM Corp. |
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include "aspeed-g6.dtsi" |
| 6 |
#include <dt-bindings/gpio/aspeed-gpio.h> |
| 7 |
#include <dt-bindings/i2c/i2c.h> |
| 8 |
#include <dt-bindings/leds/leds-pca955x.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Rainier 2U"; |
| 12 |
compatible = "ibm,rainier-bmc", "aspeed,ast2600"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
serial4 = &uart5; |
| 16 |
i2c16 = &i2c2mux0; |
| 17 |
i2c17 = &i2c2mux1; |
| 18 |
i2c18 = &i2c2mux2; |
| 19 |
i2c19 = &i2c2mux3; |
| 20 |
i2c20 = &i2c4mux0chn0; |
| 21 |
i2c21 = &i2c4mux0chn1; |
| 22 |
i2c22 = &i2c4mux0chn2; |
| 23 |
i2c23 = &i2c5mux0chn0; |
| 24 |
i2c24 = &i2c5mux0chn1; |
| 25 |
i2c25 = &i2c6mux0chn0; |
| 26 |
i2c26 = &i2c6mux0chn1; |
| 27 |
i2c27 = &i2c6mux0chn2; |
| 28 |
i2c28 = &i2c6mux0chn3; |
| 29 |
i2c29 = &i2c11mux0chn0; |
| 30 |
i2c30 = &i2c11mux0chn1; |
| 31 |
}; |
| 32 |
|
| 33 |
chosen { |
| 34 |
stdout-path = &uart5; |
| 35 |
bootargs = "console=ttyS4,115200n8 earlycon"; |
| 36 |
}; |
| 37 |
|
| 38 |
memory@80000000 { |
| 39 |
device_type = "memory"; |
| 40 |
reg = <0x80000000 0x40000000>; |
| 41 |
}; |
| 42 |
|
| 43 |
reserved-memory { |
| 44 |
#address-cells = <1>; |
| 45 |
#size-cells = <1>; |
| 46 |
ranges; |
| 47 |
|
| 48 |
ramoops@b3e00000 { |
| 49 |
compatible = "ramoops"; |
| 50 |
reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ |
| 51 |
record-size = <0x8000>; |
| 52 |
console-size = <0x8000>; |
| 53 |
ftrace-size = <0x8000>; |
| 54 |
pmsg-size = <0x8000>; |
| 55 |
max-reason = <3>; /* KMSG_DUMP_EMERG */ |
| 56 |
}; |
| 57 |
|
| 58 |
/* LPC FW cycle bridge region requires natural alignment */ |
| 59 |
flash_memory: region@b4000000 { |
| 60 |
no-map; |
| 61 |
reg = <0xb4000000 0x04000000>; /* 64M */ |
| 62 |
}; |
| 63 |
|
| 64 |
/* VGA region is dictated by hardware strapping */ |
| 65 |
vga_memory: region@bf000000 { |
| 66 |
no-map; |
| 67 |
compatible = "shared-dma-pool"; |
| 68 |
reg = <0xbf000000 0x01000000>; /* 16M */ |
| 69 |
}; |
| 70 |
}; |
| 71 |
|
| 72 |
i2c2mux: i2cmux { |
| 73 |
compatible = "i2c-mux-gpio"; |
| 74 |
#address-cells = <1>; |
| 75 |
#size-cells = <0>; |
| 76 |
status = "okay"; |
| 77 |
|
| 78 |
i2c-parent = <&i2c2>; |
| 79 |
mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>, |
| 80 |
<&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>; |
| 81 |
idle-state = <0>; |
| 82 |
|
| 83 |
i2c2mux0: i2c@0 { |
| 84 |
#address-cells = <1>; |
| 85 |
#size-cells = <0>; |
| 86 |
reg = <0>; |
| 87 |
}; |
| 88 |
|
| 89 |
i2c2mux1: i2c@1 { |
| 90 |
#address-cells = <1>; |
| 91 |
#size-cells = <0>; |
| 92 |
reg = <1>; |
| 93 |
}; |
| 94 |
|
| 95 |
i2c2mux2: i2c@2 { |
| 96 |
#address-cells = <1>; |
| 97 |
#size-cells = <0>; |
| 98 |
reg = <2>; |
| 99 |
}; |
| 100 |
|
| 101 |
i2c2mux3: i2c@3 { |
| 102 |
#address-cells = <1>; |
| 103 |
#size-cells = <0>; |
| 104 |
reg = <3>; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
leds { |
| 109 |
compatible = "gpio-leds"; |
| 110 |
|
| 111 |
/* BMC Card fault LED at the back */ |
| 112 |
led-bmc-ingraham0 { |
| 113 |
gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; |
| 114 |
}; |
| 115 |
|
| 116 |
/* Enclosure ID LED at the back */ |
| 117 |
led-rear-enc-id0 { |
| 118 |
gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; |
| 119 |
}; |
| 120 |
|
| 121 |
/* Enclosure fault LED at the back */ |
| 122 |
led-rear-enc-fault0 { |
| 123 |
gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; |
| 124 |
}; |
| 125 |
|
| 126 |
/* PCIE slot power LED */ |
| 127 |
led-pcieslot-power { |
| 128 |
gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; |
| 129 |
}; |
| 130 |
}; |
| 131 |
|
| 132 |
gpio-keys-polled { |
| 133 |
compatible = "gpio-keys-polled"; |
| 134 |
poll-interval = <1000>; |
| 135 |
|
| 136 |
event-fan0-presence { |
| 137 |
label = "fan0-presence"; |
| 138 |
gpios = <&pca0 6 GPIO_ACTIVE_LOW>; |
| 139 |
linux,code = <6>; |
| 140 |
}; |
| 141 |
|
| 142 |
event-fan1-presence { |
| 143 |
label = "fan1-presence"; |
| 144 |
gpios = <&pca0 7 GPIO_ACTIVE_LOW>; |
| 145 |
linux,code = <7>; |
| 146 |
}; |
| 147 |
|
| 148 |
event-fan2-presence { |
| 149 |
label = "fan2-presence"; |
| 150 |
gpios = <&pca0 8 GPIO_ACTIVE_LOW>; |
| 151 |
linux,code = <8>; |
| 152 |
}; |
| 153 |
|
| 154 |
event-fan3-presence { |
| 155 |
label = "fan3-presence"; |
| 156 |
gpios = <&pca0 9 GPIO_ACTIVE_LOW>; |
| 157 |
linux,code = <9>; |
| 158 |
}; |
| 159 |
|
| 160 |
event-fan4-presence { |
| 161 |
label = "fan4-presence"; |
| 162 |
gpios = <&pca0 10 GPIO_ACTIVE_LOW>; |
| 163 |
linux,code = <10>; |
| 164 |
}; |
| 165 |
|
| 166 |
event-fan5-presence { |
| 167 |
label = "fan5-presence"; |
| 168 |
gpios = <&pca0 11 GPIO_ACTIVE_LOW>; |
| 169 |
linux,code = <11>; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
iio-hwmon { |
| 174 |
compatible = "iio-hwmon"; |
| 175 |
io-channels = <&adc1 7>; |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
&adc1 { |
| 180 |
status = "okay"; |
| 181 |
aspeed,int-vref-microvolt = <2500000>; |
| 182 |
pinctrl-names = "default"; |
| 183 |
pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default |
| 184 |
&pinctrl_adc10_default &pinctrl_adc11_default |
| 185 |
&pinctrl_adc12_default &pinctrl_adc13_default |
| 186 |
&pinctrl_adc14_default &pinctrl_adc15_default>; |
| 187 |
}; |
| 188 |
|
| 189 |
&ehci1 { |
| 190 |
status = "okay"; |
| 191 |
}; |
| 192 |
|
| 193 |
&uhci { |
| 194 |
status = "okay"; |
| 195 |
}; |
| 196 |
|
| 197 |
&gpio0 { |
| 198 |
gpio-line-names = |
| 199 |
/*A0-A7*/ "","","","","","","","", |
| 200 |
/*B0-B7*/ "","","","","","","checkstop","", |
| 201 |
/*C0-C7*/ "","","","","","","","", |
| 202 |
/*D0-D7*/ "","","","","","","","", |
| 203 |
/*E0-E7*/ "","","","","","","","", |
| 204 |
/*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","", |
| 205 |
/*G0-G7*/ "","","","","","","","", |
| 206 |
/*H0-H7*/ "","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","","", |
| 207 |
/*I0-I7*/ "","","","","","","bmc-secure-boot","", |
| 208 |
/*J0-J7*/ "","","","","","","","", |
| 209 |
/*K0-K7*/ "","","","","","","","", |
| 210 |
/*L0-L7*/ "","","","","","","","", |
| 211 |
/*M0-M7*/ "","","","","","","","", |
| 212 |
/*N0-N7*/ "","","","","","","","", |
| 213 |
/*O0-O7*/ "","","","usb-power","","","","", |
| 214 |
/*P0-P7*/ "","","","","led-pcieslot-power","","","", |
| 215 |
/*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", |
| 216 |
/*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", |
| 217 |
/*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", |
| 218 |
"power-ffs-sync-history","","","", |
| 219 |
/*T0-T7*/ "","","","","","","","", |
| 220 |
/*U0-U7*/ "","","","","","","","", |
| 221 |
/*V0-V7*/ "","","","","","","","", |
| 222 |
/*W0-W7*/ "","","","","","","","", |
| 223 |
/*X0-X7*/ "","","","","","","","", |
| 224 |
/*Y0-Y7*/ "","","","","","","","", |
| 225 |
/*Z0-Z7*/ "","","","","","","",""; |
| 226 |
|
| 227 |
i2c3-mux-oe-n-hog { |
| 228 |
gpio-hog; |
| 229 |
gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>; |
| 230 |
output-high; |
| 231 |
line-name = "I2C3_MUX_OE_N"; |
| 232 |
}; |
| 233 |
|
| 234 |
usb-power-hog { |
| 235 |
gpio-hog; |
| 236 |
gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>; |
| 237 |
output-high; |
| 238 |
}; |
| 239 |
}; |
| 240 |
|
| 241 |
&emmc_controller { |
| 242 |
status = "okay"; |
| 243 |
}; |
| 244 |
|
| 245 |
&pinctrl_emmc_default { |
| 246 |
bias-disable; |
| 247 |
}; |
| 248 |
|
| 249 |
&emmc { |
| 250 |
status = "okay"; |
| 251 |
clk-phase-mmc-hs200 = <180>, <180>; |
| 252 |
}; |
| 253 |
|
| 254 |
&ibt { |
| 255 |
status = "okay"; |
| 256 |
}; |
| 257 |
|
| 258 |
&i2c0 { |
| 259 |
status = "okay"; |
| 260 |
|
| 261 |
eeprom@51 { |
| 262 |
compatible = "atmel,24c64"; |
| 263 |
reg = <0x51>; |
| 264 |
}; |
| 265 |
|
| 266 |
tca_pres1: tca9554@20 { |
| 267 |
compatible = "ti,tca9554"; |
| 268 |
reg = <0x20>; |
| 269 |
#address-cells = <1>; |
| 270 |
#size-cells = <0>; |
| 271 |
|
| 272 |
gpio-controller; |
| 273 |
#gpio-cells = <2>; |
| 274 |
|
| 275 |
gpio-line-names = "", |
| 276 |
"RUSSEL_FW_I2C_ENABLE_N", |
| 277 |
"RUSSEL_OPPANEL_PRESENCE_N", |
| 278 |
"BLYTH_OPPANEL_PRESENCE_N", |
| 279 |
"CPU_TPM_CARD_PRESENT_N", |
| 280 |
"DASD_BP2_PRESENT_N", |
| 281 |
"DASD_BP1_PRESENT_N", |
| 282 |
"DASD_BP0_PRESENT_N"; |
| 283 |
}; |
| 284 |
}; |
| 285 |
|
| 286 |
&i2c1 { |
| 287 |
status = "okay"; |
| 288 |
}; |
| 289 |
|
| 290 |
&i2c2 { |
| 291 |
status = "okay"; |
| 292 |
}; |
| 293 |
|
| 294 |
&i2c3 { |
| 295 |
status = "okay"; |
| 296 |
|
| 297 |
power-supply@68 { |
| 298 |
compatible = "ibm,cffps"; |
| 299 |
reg = <0x68>; |
| 300 |
}; |
| 301 |
|
| 302 |
power-supply@69 { |
| 303 |
compatible = "ibm,cffps"; |
| 304 |
reg = <0x69>; |
| 305 |
}; |
| 306 |
|
| 307 |
pca_pres1: pca9552@61 { |
| 308 |
compatible = "nxp,pca9552"; |
| 309 |
reg = <0x61>; |
| 310 |
#address-cells = <1>; |
| 311 |
#size-cells = <0>; |
| 312 |
|
| 313 |
gpio-controller; |
| 314 |
#gpio-cells = <2>; |
| 315 |
|
| 316 |
gpio-line-names = |
| 317 |
"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD", |
| 318 |
"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD", |
| 319 |
"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N", |
| 320 |
"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N", |
| 321 |
"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N", |
| 322 |
"", "", "", "", "", ""; |
| 323 |
}; |
| 324 |
}; |
| 325 |
|
| 326 |
&i2c4 { |
| 327 |
status = "okay"; |
| 328 |
|
| 329 |
tmp275@48 { |
| 330 |
compatible = "ti,tmp275"; |
| 331 |
reg = <0x48>; |
| 332 |
}; |
| 333 |
|
| 334 |
tmp275@49 { |
| 335 |
compatible = "ti,tmp275"; |
| 336 |
reg = <0x49>; |
| 337 |
}; |
| 338 |
|
| 339 |
tmp275@4a { |
| 340 |
compatible = "ti,tmp275"; |
| 341 |
reg = <0x4a>; |
| 342 |
}; |
| 343 |
|
| 344 |
i2c-mux@70 { |
| 345 |
compatible = "nxp,pca9546"; |
| 346 |
reg = <0x70>; |
| 347 |
#address-cells = <1>; |
| 348 |
#size-cells = <0>; |
| 349 |
status = "okay"; |
| 350 |
i2c-mux-idle-disconnect; |
| 351 |
|
| 352 |
i2c4mux0chn0: i2c@0 { |
| 353 |
#address-cells = <1>; |
| 354 |
#size-cells = <0>; |
| 355 |
reg = <0>; |
| 356 |
|
| 357 |
eeprom@50 { |
| 358 |
compatible = "atmel,24c64"; |
| 359 |
reg = <0x50>; |
| 360 |
}; |
| 361 |
|
| 362 |
pca9551@60 { |
| 363 |
compatible = "nxp,pca9551"; |
| 364 |
reg = <0x60>; |
| 365 |
#address-cells = <1>; |
| 366 |
#size-cells = <0>; |
| 367 |
|
| 368 |
gpio-controller; |
| 369 |
#gpio-cells = <2>; |
| 370 |
|
| 371 |
led@0 { |
| 372 |
label = "cablecard0-cxp-top"; |
| 373 |
reg = <0>; |
| 374 |
retain-state-shutdown; |
| 375 |
default-state = "keep"; |
| 376 |
type = <PCA955X_TYPE_LED>; |
| 377 |
}; |
| 378 |
|
| 379 |
led@1 { |
| 380 |
label = "cablecard0-cxp-bot"; |
| 381 |
reg = <1>; |
| 382 |
retain-state-shutdown; |
| 383 |
default-state = "keep"; |
| 384 |
type = <PCA955X_TYPE_LED>; |
| 385 |
}; |
| 386 |
}; |
| 387 |
}; |
| 388 |
|
| 389 |
i2c4mux0chn1: i2c@1 { |
| 390 |
#address-cells = <1>; |
| 391 |
#size-cells = <0>; |
| 392 |
reg = <1>; |
| 393 |
|
| 394 |
eeprom@51 { |
| 395 |
compatible = "atmel,24c64"; |
| 396 |
reg = <0x51>; |
| 397 |
}; |
| 398 |
}; |
| 399 |
|
| 400 |
i2c4mux0chn2: i2c@2 { |
| 401 |
#address-cells = <1>; |
| 402 |
#size-cells = <0>; |
| 403 |
reg = <2>; |
| 404 |
|
| 405 |
eeprom@52 { |
| 406 |
compatible = "atmel,24c64"; |
| 407 |
reg = <0x52>; |
| 408 |
}; |
| 409 |
}; |
| 410 |
}; |
| 411 |
}; |
| 412 |
|
| 413 |
&i2c5 { |
| 414 |
status = "okay"; |
| 415 |
|
| 416 |
tmp275@48 { |
| 417 |
compatible = "ti,tmp275"; |
| 418 |
reg = <0x48>; |
| 419 |
}; |
| 420 |
|
| 421 |
tmp275@49 { |
| 422 |
compatible = "ti,tmp275"; |
| 423 |
reg = <0x49>; |
| 424 |
}; |
| 425 |
|
| 426 |
i2c-mux@70 { |
| 427 |
compatible = "nxp,pca9546"; |
| 428 |
reg = <0x70>; |
| 429 |
#address-cells = <1>; |
| 430 |
#size-cells = <0>; |
| 431 |
status = "okay"; |
| 432 |
i2c-mux-idle-disconnect; |
| 433 |
|
| 434 |
i2c5mux0chn0: i2c@0 { |
| 435 |
#address-cells = <1>; |
| 436 |
#size-cells = <0>; |
| 437 |
reg = <0>; |
| 438 |
|
| 439 |
eeprom@50 { |
| 440 |
compatible = "atmel,24c64"; |
| 441 |
reg = <0x50>; |
| 442 |
}; |
| 443 |
|
| 444 |
pca9551@60 { |
| 445 |
compatible = "nxp,pca9551"; |
| 446 |
reg = <0x60>; |
| 447 |
#address-cells = <1>; |
| 448 |
#size-cells = <0>; |
| 449 |
|
| 450 |
gpio-controller; |
| 451 |
#gpio-cells = <2>; |
| 452 |
|
| 453 |
led@0 { |
| 454 |
label = "cablecard3-cxp-top"; |
| 455 |
reg = <0>; |
| 456 |
retain-state-shutdown; |
| 457 |
default-state = "keep"; |
| 458 |
type = <PCA955X_TYPE_LED>; |
| 459 |
}; |
| 460 |
|
| 461 |
led@1 { |
| 462 |
label = "cablecard3-cxp-bot"; |
| 463 |
reg = <1>; |
| 464 |
retain-state-shutdown; |
| 465 |
default-state = "keep"; |
| 466 |
type = <PCA955X_TYPE_LED>; |
| 467 |
}; |
| 468 |
}; |
| 469 |
}; |
| 470 |
|
| 471 |
i2c5mux0chn1: i2c@1 { |
| 472 |
#address-cells = <1>; |
| 473 |
#size-cells = <0>; |
| 474 |
reg = <1>; |
| 475 |
|
| 476 |
eeprom@51 { |
| 477 |
compatible = "atmel,24c64"; |
| 478 |
reg = <0x51>; |
| 479 |
}; |
| 480 |
|
| 481 |
pca9551@61 { |
| 482 |
compatible = "nxp,pca9551"; |
| 483 |
reg = <0x61>; |
| 484 |
#address-cells = <1>; |
| 485 |
#size-cells = <0>; |
| 486 |
|
| 487 |
gpio-controller; |
| 488 |
#gpio-cells = <2>; |
| 489 |
|
| 490 |
led@0 { |
| 491 |
label = "cablecard4-cxp-top"; |
| 492 |
reg = <0>; |
| 493 |
retain-state-shutdown; |
| 494 |
default-state = "keep"; |
| 495 |
type = <PCA955X_TYPE_LED>; |
| 496 |
}; |
| 497 |
|
| 498 |
led@1 { |
| 499 |
label = "cablecard4-cxp-bot"; |
| 500 |
reg = <1>; |
| 501 |
retain-state-shutdown; |
| 502 |
default-state = "keep"; |
| 503 |
type = <PCA955X_TYPE_LED>; |
| 504 |
}; |
| 505 |
}; |
| 506 |
}; |
| 507 |
}; |
| 508 |
}; |
| 509 |
|
| 510 |
&i2c6 { |
| 511 |
status = "okay"; |
| 512 |
|
| 513 |
tmp275@48 { |
| 514 |
compatible = "ti,tmp275"; |
| 515 |
reg = <0x48>; |
| 516 |
}; |
| 517 |
|
| 518 |
tmp275@4a { |
| 519 |
compatible = "ti,tmp275"; |
| 520 |
reg = <0x4a>; |
| 521 |
}; |
| 522 |
|
| 523 |
tmp275@4b { |
| 524 |
compatible = "ti,tmp275"; |
| 525 |
reg = <0x4b>; |
| 526 |
}; |
| 527 |
|
| 528 |
i2c-mux@70 { |
| 529 |
compatible = "nxp,pca9546"; |
| 530 |
reg = <0x70>; |
| 531 |
#address-cells = <1>; |
| 532 |
#size-cells = <0>; |
| 533 |
status = "okay"; |
| 534 |
i2c-mux-idle-disconnect; |
| 535 |
|
| 536 |
i2c6mux0chn0: i2c@0 { |
| 537 |
#address-cells = <1>; |
| 538 |
#size-cells = <0>; |
| 539 |
reg = <0>; |
| 540 |
|
| 541 |
eeprom@53 { |
| 542 |
compatible = "atmel,24c64"; |
| 543 |
reg = <0x53>; |
| 544 |
}; |
| 545 |
}; |
| 546 |
|
| 547 |
i2c6mux0chn1: i2c@1 { |
| 548 |
#address-cells = <1>; |
| 549 |
#size-cells = <0>; |
| 550 |
reg = <1>; |
| 551 |
|
| 552 |
eeprom@52 { |
| 553 |
compatible = "atmel,24c64"; |
| 554 |
reg = <0x52>; |
| 555 |
}; |
| 556 |
}; |
| 557 |
|
| 558 |
i2c6mux0chn2: i2c@2 { |
| 559 |
#address-cells = <1>; |
| 560 |
#size-cells = <0>; |
| 561 |
reg = <2>; |
| 562 |
|
| 563 |
eeprom@50 { |
| 564 |
compatible = "atmel,24c64"; |
| 565 |
reg = <0x50>; |
| 566 |
}; |
| 567 |
}; |
| 568 |
|
| 569 |
i2c6mux0chn3: i2c@3 { |
| 570 |
#address-cells = <1>; |
| 571 |
#size-cells = <0>; |
| 572 |
reg = <3>; |
| 573 |
|
| 574 |
eeprom@51 { |
| 575 |
compatible = "atmel,24c64"; |
| 576 |
reg = <0x51>; |
| 577 |
}; |
| 578 |
}; |
| 579 |
}; |
| 580 |
}; |
| 581 |
|
| 582 |
&i2c7 { |
| 583 |
multi-master; |
| 584 |
status = "okay"; |
| 585 |
|
| 586 |
pca9552@30 { |
| 587 |
compatible = "ibm,pca9552"; |
| 588 |
reg = <0x30>; |
| 589 |
#address-cells = <1>; |
| 590 |
#size-cells = <0>; |
| 591 |
|
| 592 |
gpio-controller; |
| 593 |
#gpio-cells = <2>; |
| 594 |
|
| 595 |
led@0 { |
| 596 |
label = "pcieslot0"; |
| 597 |
reg = <0>; |
| 598 |
retain-state-shutdown; |
| 599 |
default-state = "keep"; |
| 600 |
type = <PCA955X_TYPE_LED>; |
| 601 |
}; |
| 602 |
|
| 603 |
led@1 { |
| 604 |
label = "pcieslot1"; |
| 605 |
reg = <1>; |
| 606 |
retain-state-shutdown; |
| 607 |
default-state = "keep"; |
| 608 |
type = <PCA955X_TYPE_LED>; |
| 609 |
}; |
| 610 |
|
| 611 |
led@2 { |
| 612 |
label = "pcieslot2"; |
| 613 |
reg = <2>; |
| 614 |
retain-state-shutdown; |
| 615 |
default-state = "keep"; |
| 616 |
type = <PCA955X_TYPE_LED>; |
| 617 |
}; |
| 618 |
|
| 619 |
led@3 { |
| 620 |
label = "pcieslot3"; |
| 621 |
reg = <3>; |
| 622 |
retain-state-shutdown; |
| 623 |
default-state = "keep"; |
| 624 |
type = <PCA955X_TYPE_LED>; |
| 625 |
}; |
| 626 |
|
| 627 |
led@4 { |
| 628 |
label = "pcieslot4"; |
| 629 |
reg = <4>; |
| 630 |
retain-state-shutdown; |
| 631 |
default-state = "keep"; |
| 632 |
type = <PCA955X_TYPE_LED>; |
| 633 |
}; |
| 634 |
|
| 635 |
led@5 { |
| 636 |
label = "cpu1"; |
| 637 |
reg = <5>; |
| 638 |
retain-state-shutdown; |
| 639 |
default-state = "keep"; |
| 640 |
type = <PCA955X_TYPE_LED>; |
| 641 |
}; |
| 642 |
|
| 643 |
led@6 { |
| 644 |
label = "cpu-vrm1"; |
| 645 |
reg = <6>; |
| 646 |
retain-state-shutdown; |
| 647 |
default-state = "keep"; |
| 648 |
type = <PCA955X_TYPE_LED>; |
| 649 |
}; |
| 650 |
|
| 651 |
led@8 { |
| 652 |
label = "lcd-russel"; |
| 653 |
reg = <8>; |
| 654 |
retain-state-shutdown; |
| 655 |
default-state = "keep"; |
| 656 |
type = <PCA955X_TYPE_LED>; |
| 657 |
}; |
| 658 |
}; |
| 659 |
|
| 660 |
pca9552@31 { |
| 661 |
compatible = "ibm,pca9552"; |
| 662 |
reg = <0x31>; |
| 663 |
#address-cells = <1>; |
| 664 |
#size-cells = <0>; |
| 665 |
|
| 666 |
gpio-controller; |
| 667 |
#gpio-cells = <2>; |
| 668 |
|
| 669 |
led@0 { |
| 670 |
label = "ddimm0"; |
| 671 |
reg = <0>; |
| 672 |
retain-state-shutdown; |
| 673 |
default-state = "keep"; |
| 674 |
type = <PCA955X_TYPE_LED>; |
| 675 |
}; |
| 676 |
|
| 677 |
led@1 { |
| 678 |
label = "ddimm1"; |
| 679 |
reg = <1>; |
| 680 |
retain-state-shutdown; |
| 681 |
default-state = "keep"; |
| 682 |
type = <PCA955X_TYPE_LED>; |
| 683 |
}; |
| 684 |
|
| 685 |
led@2 { |
| 686 |
label = "ddimm2"; |
| 687 |
reg = <2>; |
| 688 |
retain-state-shutdown; |
| 689 |
default-state = "keep"; |
| 690 |
type = <PCA955X_TYPE_LED>; |
| 691 |
}; |
| 692 |
|
| 693 |
led@3 { |
| 694 |
label = "ddimm3"; |
| 695 |
reg = <3>; |
| 696 |
retain-state-shutdown; |
| 697 |
default-state = "keep"; |
| 698 |
type = <PCA955X_TYPE_LED>; |
| 699 |
}; |
| 700 |
|
| 701 |
led@4 { |
| 702 |
label = "ddimm4"; |
| 703 |
reg = <4>; |
| 704 |
retain-state-shutdown; |
| 705 |
default-state = "keep"; |
| 706 |
type = <PCA955X_TYPE_LED>; |
| 707 |
}; |
| 708 |
|
| 709 |
led@5 { |
| 710 |
label = "ddimm5"; |
| 711 |
reg = <5>; |
| 712 |
retain-state-shutdown; |
| 713 |
default-state = "keep"; |
| 714 |
type = <PCA955X_TYPE_LED>; |
| 715 |
}; |
| 716 |
|
| 717 |
led@6 { |
| 718 |
label = "ddimm6"; |
| 719 |
reg = <6>; |
| 720 |
retain-state-shutdown; |
| 721 |
default-state = "keep"; |
| 722 |
type = <PCA955X_TYPE_LED>; |
| 723 |
}; |
| 724 |
|
| 725 |
led@7 { |
| 726 |
label = "ddimm7"; |
| 727 |
reg = <7>; |
| 728 |
retain-state-shutdown; |
| 729 |
default-state = "keep"; |
| 730 |
type = <PCA955X_TYPE_LED>; |
| 731 |
}; |
| 732 |
|
| 733 |
led@8 { |
| 734 |
label = "ddimm8"; |
| 735 |
reg = <8>; |
| 736 |
retain-state-shutdown; |
| 737 |
default-state = "keep"; |
| 738 |
type = <PCA955X_TYPE_LED>; |
| 739 |
}; |
| 740 |
|
| 741 |
led@9 { |
| 742 |
label = "ddimm9"; |
| 743 |
reg = <9>; |
| 744 |
retain-state-shutdown; |
| 745 |
default-state = "keep"; |
| 746 |
type = <PCA955X_TYPE_LED>; |
| 747 |
}; |
| 748 |
|
| 749 |
led@10 { |
| 750 |
label = "ddimm10"; |
| 751 |
reg = <10>; |
| 752 |
retain-state-shutdown; |
| 753 |
default-state = "keep"; |
| 754 |
type = <PCA955X_TYPE_LED>; |
| 755 |
}; |
| 756 |
|
| 757 |
led@11 { |
| 758 |
label = "ddimm11"; |
| 759 |
reg = <11>; |
| 760 |
retain-state-shutdown; |
| 761 |
default-state = "keep"; |
| 762 |
type = <PCA955X_TYPE_LED>; |
| 763 |
}; |
| 764 |
|
| 765 |
led@12 { |
| 766 |
label = "ddimm12"; |
| 767 |
reg = <12>; |
| 768 |
retain-state-shutdown; |
| 769 |
default-state = "keep"; |
| 770 |
type = <PCA955X_TYPE_LED>; |
| 771 |
}; |
| 772 |
|
| 773 |
led@13 { |
| 774 |
label = "ddimm13"; |
| 775 |
reg = <13>; |
| 776 |
retain-state-shutdown; |
| 777 |
default-state = "keep"; |
| 778 |
type = <PCA955X_TYPE_LED>; |
| 779 |
}; |
| 780 |
|
| 781 |
led@14 { |
| 782 |
label = "ddimm14"; |
| 783 |
reg = <14>; |
| 784 |
retain-state-shutdown; |
| 785 |
default-state = "keep"; |
| 786 |
type = <PCA955X_TYPE_LED>; |
| 787 |
}; |
| 788 |
|
| 789 |
led@15 { |
| 790 |
label = "ddimm15"; |
| 791 |
reg = <15>; |
| 792 |
retain-state-shutdown; |
| 793 |
default-state = "keep"; |
| 794 |
type = <PCA955X_TYPE_LED>; |
| 795 |
}; |
| 796 |
}; |
| 797 |
|
| 798 |
pca9552@32 { |
| 799 |
compatible = "ibm,pca9552"; |
| 800 |
reg = <0x32>; |
| 801 |
#address-cells = <1>; |
| 802 |
#size-cells = <0>; |
| 803 |
|
| 804 |
gpio-controller; |
| 805 |
#gpio-cells = <2>; |
| 806 |
|
| 807 |
led@0 { |
| 808 |
label = "ddimm16"; |
| 809 |
reg = <0>; |
| 810 |
retain-state-shutdown; |
| 811 |
default-state = "keep"; |
| 812 |
type = <PCA955X_TYPE_LED>; |
| 813 |
}; |
| 814 |
|
| 815 |
led@1 { |
| 816 |
label = "ddimm17"; |
| 817 |
reg = <1>; |
| 818 |
retain-state-shutdown; |
| 819 |
default-state = "keep"; |
| 820 |
type = <PCA955X_TYPE_LED>; |
| 821 |
}; |
| 822 |
|
| 823 |
led@2 { |
| 824 |
label = "ddimm18"; |
| 825 |
reg = <2>; |
| 826 |
retain-state-shutdown; |
| 827 |
default-state = "keep"; |
| 828 |
type = <PCA955X_TYPE_LED>; |
| 829 |
}; |
| 830 |
|
| 831 |
led@3 { |
| 832 |
label = "ddimm19"; |
| 833 |
reg = <3>; |
| 834 |
retain-state-shutdown; |
| 835 |
default-state = "keep"; |
| 836 |
type = <PCA955X_TYPE_LED>; |
| 837 |
}; |
| 838 |
|
| 839 |
led@4 { |
| 840 |
label = "ddimm20"; |
| 841 |
reg = <4>; |
| 842 |
retain-state-shutdown; |
| 843 |
default-state = "keep"; |
| 844 |
type = <PCA955X_TYPE_LED>; |
| 845 |
}; |
| 846 |
|
| 847 |
led@5 { |
| 848 |
label = "ddimm21"; |
| 849 |
reg = <5>; |
| 850 |
retain-state-shutdown; |
| 851 |
default-state = "keep"; |
| 852 |
type = <PCA955X_TYPE_LED>; |
| 853 |
}; |
| 854 |
|
| 855 |
led@6 { |
| 856 |
label = "ddimm22"; |
| 857 |
reg = <6>; |
| 858 |
retain-state-shutdown; |
| 859 |
default-state = "keep"; |
| 860 |
type = <PCA955X_TYPE_LED>; |
| 861 |
}; |
| 862 |
|
| 863 |
led@7 { |
| 864 |
label = "ddimm23"; |
| 865 |
reg = <7>; |
| 866 |
retain-state-shutdown; |
| 867 |
default-state = "keep"; |
| 868 |
type = <PCA955X_TYPE_LED>; |
| 869 |
}; |
| 870 |
|
| 871 |
led@8 { |
| 872 |
label = "ddimm24"; |
| 873 |
reg = <8>; |
| 874 |
retain-state-shutdown; |
| 875 |
default-state = "keep"; |
| 876 |
type = <PCA955X_TYPE_LED>; |
| 877 |
}; |
| 878 |
|
| 879 |
led@9 { |
| 880 |
label = "ddimm25"; |
| 881 |
reg = <9>; |
| 882 |
retain-state-shutdown; |
| 883 |
default-state = "keep"; |
| 884 |
type = <PCA955X_TYPE_LED>; |
| 885 |
}; |
| 886 |
|
| 887 |
led@10 { |
| 888 |
label = "ddimm26"; |
| 889 |
reg = <10>; |
| 890 |
retain-state-shutdown; |
| 891 |
default-state = "keep"; |
| 892 |
type = <PCA955X_TYPE_LED>; |
| 893 |
}; |
| 894 |
|
| 895 |
led@11 { |
| 896 |
label = "ddimm27"; |
| 897 |
reg = <11>; |
| 898 |
retain-state-shutdown; |
| 899 |
default-state = "keep"; |
| 900 |
type = <PCA955X_TYPE_LED>; |
| 901 |
}; |
| 902 |
|
| 903 |
led@12 { |
| 904 |
label = "ddimm28"; |
| 905 |
reg = <12>; |
| 906 |
retain-state-shutdown; |
| 907 |
default-state = "keep"; |
| 908 |
type = <PCA955X_TYPE_LED>; |
| 909 |
}; |
| 910 |
|
| 911 |
led@13 { |
| 912 |
label = "ddimm29"; |
| 913 |
reg = <13>; |
| 914 |
retain-state-shutdown; |
| 915 |
default-state = "keep"; |
| 916 |
type = <PCA955X_TYPE_LED>; |
| 917 |
}; |
| 918 |
|
| 919 |
led@14 { |
| 920 |
label = "ddimm30"; |
| 921 |
reg = <14>; |
| 922 |
retain-state-shutdown; |
| 923 |
default-state = "keep"; |
| 924 |
type = <PCA955X_TYPE_LED>; |
| 925 |
}; |
| 926 |
|
| 927 |
led@15 { |
| 928 |
label = "ddimm31"; |
| 929 |
reg = <15>; |
| 930 |
retain-state-shutdown; |
| 931 |
default-state = "keep"; |
| 932 |
type = <PCA955X_TYPE_LED>; |
| 933 |
}; |
| 934 |
}; |
| 935 |
|
| 936 |
pca9552@33 { |
| 937 |
compatible = "ibm,pca9552"; |
| 938 |
reg = <0x33>; |
| 939 |
#address-cells = <1>; |
| 940 |
#size-cells = <0>; |
| 941 |
|
| 942 |
gpio-controller; |
| 943 |
#gpio-cells = <2>; |
| 944 |
|
| 945 |
led@0 { |
| 946 |
label = "planar"; |
| 947 |
reg = <0>; |
| 948 |
retain-state-shutdown; |
| 949 |
default-state = "keep"; |
| 950 |
type = <PCA955X_TYPE_LED>; |
| 951 |
}; |
| 952 |
|
| 953 |
led@1 { |
| 954 |
label = "cpu0"; |
| 955 |
reg = <1>; |
| 956 |
retain-state-shutdown; |
| 957 |
default-state = "keep"; |
| 958 |
type = <PCA955X_TYPE_LED>; |
| 959 |
}; |
| 960 |
|
| 961 |
led@3 { |
| 962 |
label = "dasd-pyramid0"; |
| 963 |
reg = <3>; |
| 964 |
retain-state-shutdown; |
| 965 |
default-state = "keep"; |
| 966 |
type = <PCA955X_TYPE_LED>; |
| 967 |
}; |
| 968 |
|
| 969 |
led@4 { |
| 970 |
label = "dasd-pyramid1"; |
| 971 |
reg = <4>; |
| 972 |
retain-state-shutdown; |
| 973 |
default-state = "keep"; |
| 974 |
type = <PCA955X_TYPE_LED>; |
| 975 |
}; |
| 976 |
|
| 977 |
led@5 { |
| 978 |
label = "dasd-pyramid2"; |
| 979 |
reg = <5>; |
| 980 |
retain-state-shutdown; |
| 981 |
default-state = "keep"; |
| 982 |
type = <PCA955X_TYPE_LED>; |
| 983 |
}; |
| 984 |
|
| 985 |
led@6 { |
| 986 |
label = "cpu0-vrm0"; |
| 987 |
reg = <6>; |
| 988 |
retain-state-shutdown; |
| 989 |
default-state = "keep"; |
| 990 |
type = <PCA955X_TYPE_LED>; |
| 991 |
}; |
| 992 |
|
| 993 |
led@7 { |
| 994 |
label = "rtc-battery"; |
| 995 |
reg = <7>; |
| 996 |
retain-state-shutdown; |
| 997 |
default-state = "keep"; |
| 998 |
type = <PCA955X_TYPE_LED>; |
| 999 |
}; |
| 1000 |
|
| 1001 |
led@8 { |
| 1002 |
label = "base-blyth"; |
| 1003 |
reg = <8>; |
| 1004 |
retain-state-shutdown; |
| 1005 |
default-state = "keep"; |
| 1006 |
type = <PCA955X_TYPE_LED>; |
| 1007 |
}; |
| 1008 |
|
| 1009 |
led@9 { |
| 1010 |
label = "pcieslot6"; |
| 1011 |
reg = <9>; |
| 1012 |
retain-state-shutdown; |
| 1013 |
default-state = "keep"; |
| 1014 |
type = <PCA955X_TYPE_LED>; |
| 1015 |
}; |
| 1016 |
|
| 1017 |
led@10 { |
| 1018 |
label = "pcieslot7"; |
| 1019 |
reg = <10>; |
| 1020 |
retain-state-shutdown; |
| 1021 |
default-state = "keep"; |
| 1022 |
type = <PCA955X_TYPE_LED>; |
| 1023 |
}; |
| 1024 |
|
| 1025 |
led@11 { |
| 1026 |
label = "pcieslot8"; |
| 1027 |
reg = <11>; |
| 1028 |
retain-state-shutdown; |
| 1029 |
default-state = "keep"; |
| 1030 |
type = <PCA955X_TYPE_LED>; |
| 1031 |
}; |
| 1032 |
|
| 1033 |
led@12 { |
| 1034 |
label = "pcieslot9"; |
| 1035 |
reg = <12>; |
| 1036 |
retain-state-shutdown; |
| 1037 |
default-state = "keep"; |
| 1038 |
type = <PCA955X_TYPE_LED>; |
| 1039 |
}; |
| 1040 |
|
| 1041 |
led@13 { |
| 1042 |
label = "pcieslot10"; |
| 1043 |
reg = <13>; |
| 1044 |
retain-state-shutdown; |
| 1045 |
default-state = "keep"; |
| 1046 |
type = <PCA955X_TYPE_LED>; |
| 1047 |
}; |
| 1048 |
|
| 1049 |
led@14 { |
| 1050 |
label = "pcieslot11"; |
| 1051 |
reg = <14>; |
| 1052 |
retain-state-shutdown; |
| 1053 |
default-state = "keep"; |
| 1054 |
type = <PCA955X_TYPE_LED>; |
| 1055 |
}; |
| 1056 |
|
| 1057 |
led@15 { |
| 1058 |
label = "tpm-wilson"; |
| 1059 |
reg = <15>; |
| 1060 |
retain-state-shutdown; |
| 1061 |
default-state = "keep"; |
| 1062 |
type = <PCA955X_TYPE_LED>; |
| 1063 |
}; |
| 1064 |
}; |
| 1065 |
|
| 1066 |
si7021-a20@40 { |
| 1067 |
compatible = "silabs,si7020"; |
| 1068 |
reg = <0x40>; |
| 1069 |
}; |
| 1070 |
|
| 1071 |
tmp275@48 { |
| 1072 |
compatible = "ti,tmp275"; |
| 1073 |
reg = <0x48>; |
| 1074 |
}; |
| 1075 |
|
| 1076 |
max: max31785@52 { |
| 1077 |
compatible = "maxim,max31785a"; |
| 1078 |
reg = <0x52>; |
| 1079 |
#address-cells = <1>; |
| 1080 |
#size-cells = <0>; |
| 1081 |
|
| 1082 |
fan0: fan@0 { |
| 1083 |
reg = <0>; |
| 1084 |
}; |
| 1085 |
|
| 1086 |
fan1: fan@1 { |
| 1087 |
reg = <1>; |
| 1088 |
}; |
| 1089 |
|
| 1090 |
fan2: fan@2 { |
| 1091 |
reg = <2>; |
| 1092 |
}; |
| 1093 |
|
| 1094 |
fan3: fan@3 { |
| 1095 |
reg = <3>; |
| 1096 |
}; |
| 1097 |
|
| 1098 |
fan4: fan@4 { |
| 1099 |
reg = <4>; |
| 1100 |
}; |
| 1101 |
|
| 1102 |
fan5: fan@5 { |
| 1103 |
reg = <5>; |
| 1104 |
}; |
| 1105 |
}; |
| 1106 |
|
| 1107 |
pca9551@60 { |
| 1108 |
compatible = "nxp,pca9551"; |
| 1109 |
reg = <0x60>; |
| 1110 |
#address-cells = <1>; |
| 1111 |
#size-cells = <0>; |
| 1112 |
|
| 1113 |
gpio-controller; |
| 1114 |
#gpio-cells = <2>; |
| 1115 |
|
| 1116 |
led@0 { |
| 1117 |
label = "front-sys-id0"; |
| 1118 |
reg = <0>; |
| 1119 |
retain-state-shutdown; |
| 1120 |
default-state = "keep"; |
| 1121 |
type = <PCA955X_TYPE_LED>; |
| 1122 |
}; |
| 1123 |
|
| 1124 |
led@1 { |
| 1125 |
label = "front-check-log0"; |
| 1126 |
reg = <1>; |
| 1127 |
retain-state-shutdown; |
| 1128 |
default-state = "keep"; |
| 1129 |
type = <PCA955X_TYPE_LED>; |
| 1130 |
}; |
| 1131 |
|
| 1132 |
led@2 { |
| 1133 |
label = "front-enc-fault1"; |
| 1134 |
reg = <2>; |
| 1135 |
retain-state-shutdown; |
| 1136 |
default-state = "keep"; |
| 1137 |
type = <PCA955X_TYPE_LED>; |
| 1138 |
}; |
| 1139 |
|
| 1140 |
led@3 { |
| 1141 |
label = "front-sys-pwron0"; |
| 1142 |
reg = <3>; |
| 1143 |
retain-state-shutdown; |
| 1144 |
default-state = "keep"; |
| 1145 |
type = <PCA955X_TYPE_LED>; |
| 1146 |
}; |
| 1147 |
}; |
| 1148 |
|
| 1149 |
pca0: pca9552@61 { |
| 1150 |
compatible = "nxp,pca9552"; |
| 1151 |
reg = <0x61>; |
| 1152 |
#address-cells = <1>; |
| 1153 |
#size-cells = <0>; |
| 1154 |
|
| 1155 |
gpio-controller; |
| 1156 |
#gpio-cells = <2>; |
| 1157 |
|
| 1158 |
led@0 { |
| 1159 |
label = "fan0"; |
| 1160 |
reg = <0>; |
| 1161 |
retain-state-shutdown; |
| 1162 |
default-state = "keep"; |
| 1163 |
type = <PCA955X_TYPE_LED>; |
| 1164 |
}; |
| 1165 |
|
| 1166 |
led@1 { |
| 1167 |
label = "fan1"; |
| 1168 |
reg = <1>; |
| 1169 |
retain-state-shutdown; |
| 1170 |
default-state = "keep"; |
| 1171 |
type = <PCA955X_TYPE_LED>; |
| 1172 |
}; |
| 1173 |
|
| 1174 |
led@2 { |
| 1175 |
label = "fan2"; |
| 1176 |
reg = <2>; |
| 1177 |
retain-state-shutdown; |
| 1178 |
default-state = "keep"; |
| 1179 |
type = <PCA955X_TYPE_LED>; |
| 1180 |
}; |
| 1181 |
|
| 1182 |
led@3 { |
| 1183 |
label = "fan3"; |
| 1184 |
reg = <3>; |
| 1185 |
retain-state-shutdown; |
| 1186 |
default-state = "keep"; |
| 1187 |
type = <PCA955X_TYPE_LED>; |
| 1188 |
}; |
| 1189 |
|
| 1190 |
led@4 { |
| 1191 |
label = "fan4"; |
| 1192 |
reg = <4>; |
| 1193 |
retain-state-shutdown; |
| 1194 |
default-state = "keep"; |
| 1195 |
type = <PCA955X_TYPE_LED>; |
| 1196 |
}; |
| 1197 |
|
| 1198 |
led@5 { |
| 1199 |
label = "fan5"; |
| 1200 |
reg = <5>; |
| 1201 |
retain-state-shutdown; |
| 1202 |
default-state = "keep"; |
| 1203 |
type = <PCA955X_TYPE_LED>; |
| 1204 |
}; |
| 1205 |
}; |
| 1206 |
|
| 1207 |
ibm-panel@62 { |
| 1208 |
compatible = "ibm,op-panel"; |
| 1209 |
reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; |
| 1210 |
}; |
| 1211 |
|
| 1212 |
dps: dps310@76 { |
| 1213 |
compatible = "infineon,dps310"; |
| 1214 |
reg = <0x76>; |
| 1215 |
#io-channel-cells = <0>; |
| 1216 |
}; |
| 1217 |
|
| 1218 |
eeprom@50 { |
| 1219 |
compatible = "atmel,24c64"; |
| 1220 |
reg = <0x50>; |
| 1221 |
}; |
| 1222 |
|
| 1223 |
eeprom@51 { |
| 1224 |
compatible = "atmel,24c64"; |
| 1225 |
reg = <0x51>; |
| 1226 |
}; |
| 1227 |
}; |
| 1228 |
|
| 1229 |
&i2c8 { |
| 1230 |
status = "okay"; |
| 1231 |
|
| 1232 |
ucd90320@11 { |
| 1233 |
compatible = "ti,ucd90320"; |
| 1234 |
reg = <0x11>; |
| 1235 |
}; |
| 1236 |
|
| 1237 |
rtc@32 { |
| 1238 |
compatible = "epson,rx8900"; |
| 1239 |
reg = <0x32>; |
| 1240 |
}; |
| 1241 |
|
| 1242 |
tmp275@48 { |
| 1243 |
compatible = "ti,tmp275"; |
| 1244 |
reg = <0x48>; |
| 1245 |
}; |
| 1246 |
|
| 1247 |
tmp275@4a { |
| 1248 |
compatible = "ti,tmp275"; |
| 1249 |
reg = <0x4a>; |
| 1250 |
}; |
| 1251 |
|
| 1252 |
eeprom@50 { |
| 1253 |
compatible = "atmel,24c64"; |
| 1254 |
reg = <0x50>; |
| 1255 |
}; |
| 1256 |
|
| 1257 |
eeprom@51 { |
| 1258 |
compatible = "atmel,24c64"; |
| 1259 |
reg = <0x51>; |
| 1260 |
}; |
| 1261 |
|
| 1262 |
pca_pres3: pca9552@60 { |
| 1263 |
compatible = "nxp,pca9552"; |
| 1264 |
reg = <0x60>; |
| 1265 |
#address-cells = <1>; |
| 1266 |
#size-cells = <0>; |
| 1267 |
gpio-controller; |
| 1268 |
#gpio-cells = <2>; |
| 1269 |
|
| 1270 |
gpio-line-names = |
| 1271 |
"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES", |
| 1272 |
"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N", |
| 1273 |
"power-config-full-load", ""; |
| 1274 |
}; |
| 1275 |
|
| 1276 |
pca_pres2: pca9552@61 { |
| 1277 |
compatible = "nxp,pca9552"; |
| 1278 |
reg = <0x61>; |
| 1279 |
#address-cells = <1>; |
| 1280 |
#size-cells = <0>; |
| 1281 |
gpio-controller; |
| 1282 |
#gpio-cells = <2>; |
| 1283 |
|
| 1284 |
gpio-line-names = |
| 1285 |
"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD", |
| 1286 |
"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD", |
| 1287 |
"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD", |
| 1288 |
"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N", |
| 1289 |
"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N", |
| 1290 |
"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N", |
| 1291 |
"", "", "", ""; |
| 1292 |
}; |
| 1293 |
|
| 1294 |
}; |
| 1295 |
|
| 1296 |
&i2c9 { |
| 1297 |
status = "okay"; |
| 1298 |
|
| 1299 |
tmp423a@4c { |
| 1300 |
compatible = "ti,tmp423"; |
| 1301 |
reg = <0x4c>; |
| 1302 |
}; |
| 1303 |
|
| 1304 |
tmp423b@4d { |
| 1305 |
compatible = "ti,tmp423"; |
| 1306 |
reg = <0x4d>; |
| 1307 |
}; |
| 1308 |
|
| 1309 |
eeprom@50 { |
| 1310 |
compatible = "atmel,24c128"; |
| 1311 |
reg = <0x50>; |
| 1312 |
}; |
| 1313 |
}; |
| 1314 |
|
| 1315 |
&i2c10 { |
| 1316 |
status = "okay"; |
| 1317 |
|
| 1318 |
tmp423a@4c { |
| 1319 |
compatible = "ti,tmp423"; |
| 1320 |
reg = <0x4c>; |
| 1321 |
}; |
| 1322 |
|
| 1323 |
tmp423b@4d { |
| 1324 |
compatible = "ti,tmp423"; |
| 1325 |
reg = <0x4d>; |
| 1326 |
}; |
| 1327 |
|
| 1328 |
eeprom@50 { |
| 1329 |
compatible = "atmel,24c128"; |
| 1330 |
reg = <0x50>; |
| 1331 |
}; |
| 1332 |
}; |
| 1333 |
|
| 1334 |
&i2c11 { |
| 1335 |
status = "okay"; |
| 1336 |
|
| 1337 |
tmp275@48 { |
| 1338 |
compatible = "ti,tmp275"; |
| 1339 |
reg = <0x48>; |
| 1340 |
}; |
| 1341 |
|
| 1342 |
tmp275@49 { |
| 1343 |
compatible = "ti,tmp275"; |
| 1344 |
reg = <0x49>; |
| 1345 |
}; |
| 1346 |
|
| 1347 |
i2c-mux@70 { |
| 1348 |
compatible = "nxp,pca9546"; |
| 1349 |
reg = <0x70>; |
| 1350 |
#address-cells = <1>; |
| 1351 |
#size-cells = <0>; |
| 1352 |
status = "okay"; |
| 1353 |
i2c-mux-idle-disconnect; |
| 1354 |
|
| 1355 |
i2c11mux0chn0: i2c@0 { |
| 1356 |
#address-cells = <1>; |
| 1357 |
#size-cells = <0>; |
| 1358 |
reg = <0>; |
| 1359 |
|
| 1360 |
eeprom@50 { |
| 1361 |
compatible = "atmel,24c64"; |
| 1362 |
reg = <0x50>; |
| 1363 |
}; |
| 1364 |
|
| 1365 |
pca9551@60 { |
| 1366 |
compatible = "nxp,pca9551"; |
| 1367 |
reg = <0x60>; |
| 1368 |
#address-cells = <1>; |
| 1369 |
#size-cells = <0>; |
| 1370 |
|
| 1371 |
gpio-controller; |
| 1372 |
#gpio-cells = <2>; |
| 1373 |
|
| 1374 |
led@0 { |
| 1375 |
label = "cablecard10-cxp-top"; |
| 1376 |
reg = <0>; |
| 1377 |
retain-state-shutdown; |
| 1378 |
default-state = "keep"; |
| 1379 |
type = <PCA955X_TYPE_LED>; |
| 1380 |
}; |
| 1381 |
|
| 1382 |
led@1 { |
| 1383 |
label = "cablecard10-cxp-bot"; |
| 1384 |
reg = <1>; |
| 1385 |
retain-state-shutdown; |
| 1386 |
default-state = "keep"; |
| 1387 |
type = <PCA955X_TYPE_LED>; |
| 1388 |
}; |
| 1389 |
}; |
| 1390 |
}; |
| 1391 |
|
| 1392 |
i2c11mux0chn1: i2c@1 { |
| 1393 |
#address-cells = <1>; |
| 1394 |
#size-cells = <0>; |
| 1395 |
reg = <1>; |
| 1396 |
|
| 1397 |
eeprom@51 { |
| 1398 |
compatible = "atmel,24c64"; |
| 1399 |
reg = <0x51>; |
| 1400 |
}; |
| 1401 |
}; |
| 1402 |
}; |
| 1403 |
}; |
| 1404 |
|
| 1405 |
&i2c12 { |
| 1406 |
status = "okay"; |
| 1407 |
|
| 1408 |
eeprom@50 { |
| 1409 |
compatible = "atmel,24c64"; |
| 1410 |
reg = <0x50>; |
| 1411 |
}; |
| 1412 |
}; |
| 1413 |
|
| 1414 |
&i2c13 { |
| 1415 |
status = "okay"; |
| 1416 |
|
| 1417 |
eeprom@50 { |
| 1418 |
compatible = "atmel,24c64"; |
| 1419 |
reg = <0x50>; |
| 1420 |
}; |
| 1421 |
|
| 1422 |
pca9552@60 { |
| 1423 |
compatible = "nxp,pca9552"; |
| 1424 |
reg = <0x60>; |
| 1425 |
#address-cells = <1>; |
| 1426 |
#size-cells = <0>; |
| 1427 |
|
| 1428 |
gpio-controller; |
| 1429 |
#gpio-cells = <2>; |
| 1430 |
|
| 1431 |
led@0 { |
| 1432 |
label = "nvme0"; |
| 1433 |
reg = <0>; |
| 1434 |
retain-state-shutdown; |
| 1435 |
default-state = "keep"; |
| 1436 |
type = <PCA955X_TYPE_LED>; |
| 1437 |
}; |
| 1438 |
|
| 1439 |
led@1 { |
| 1440 |
label = "nvme1"; |
| 1441 |
reg = <1>; |
| 1442 |
retain-state-shutdown; |
| 1443 |
default-state = "keep"; |
| 1444 |
type = <PCA955X_TYPE_LED>; |
| 1445 |
}; |
| 1446 |
|
| 1447 |
led@2 { |
| 1448 |
label = "nvme2"; |
| 1449 |
reg = <2>; |
| 1450 |
retain-state-shutdown; |
| 1451 |
default-state = "keep"; |
| 1452 |
type = <PCA955X_TYPE_LED>; |
| 1453 |
}; |
| 1454 |
|
| 1455 |
led@3 { |
| 1456 |
label = "nvme3"; |
| 1457 |
reg = <3>; |
| 1458 |
retain-state-shutdown; |
| 1459 |
default-state = "keep"; |
| 1460 |
type = <PCA955X_TYPE_LED>; |
| 1461 |
}; |
| 1462 |
|
| 1463 |
led@4 { |
| 1464 |
label = "nvme4"; |
| 1465 |
reg = <4>; |
| 1466 |
retain-state-shutdown; |
| 1467 |
default-state = "keep"; |
| 1468 |
type = <PCA955X_TYPE_LED>; |
| 1469 |
}; |
| 1470 |
|
| 1471 |
led@5 { |
| 1472 |
label = "nvme5"; |
| 1473 |
reg = <5>; |
| 1474 |
retain-state-shutdown; |
| 1475 |
default-state = "keep"; |
| 1476 |
type = <PCA955X_TYPE_LED>; |
| 1477 |
}; |
| 1478 |
|
| 1479 |
led@6 { |
| 1480 |
label = "nvme6"; |
| 1481 |
reg = <6>; |
| 1482 |
retain-state-shutdown; |
| 1483 |
default-state = "keep"; |
| 1484 |
type = <PCA955X_TYPE_LED>; |
| 1485 |
}; |
| 1486 |
|
| 1487 |
led@7 { |
| 1488 |
label = "nvme7"; |
| 1489 |
reg = <7>; |
| 1490 |
retain-state-shutdown; |
| 1491 |
default-state = "keep"; |
| 1492 |
type = <PCA955X_TYPE_LED>; |
| 1493 |
}; |
| 1494 |
}; |
| 1495 |
}; |
| 1496 |
|
| 1497 |
&i2c14 { |
| 1498 |
status = "okay"; |
| 1499 |
|
| 1500 |
eeprom@50 { |
| 1501 |
compatible = "atmel,24c64"; |
| 1502 |
reg = <0x50>; |
| 1503 |
}; |
| 1504 |
|
| 1505 |
pca9552@60 { |
| 1506 |
compatible = "nxp,pca9552"; |
| 1507 |
reg = <0x60>; |
| 1508 |
#address-cells = <1>; |
| 1509 |
#size-cells = <0>; |
| 1510 |
|
| 1511 |
gpio-controller; |
| 1512 |
#gpio-cells = <2>; |
| 1513 |
|
| 1514 |
led@0 { |
| 1515 |
label = "nvme8"; |
| 1516 |
reg = <0>; |
| 1517 |
retain-state-shutdown; |
| 1518 |
default-state = "keep"; |
| 1519 |
type = <PCA955X_TYPE_LED>; |
| 1520 |
}; |
| 1521 |
|
| 1522 |
led@1 { |
| 1523 |
label = "nvme9"; |
| 1524 |
reg = <1>; |
| 1525 |
retain-state-shutdown; |
| 1526 |
default-state = "keep"; |
| 1527 |
type = <PCA955X_TYPE_LED>; |
| 1528 |
}; |
| 1529 |
|
| 1530 |
led@2 { |
| 1531 |
label = "nvme10"; |
| 1532 |
reg = <2>; |
| 1533 |
retain-state-shutdown; |
| 1534 |
default-state = "keep"; |
| 1535 |
type = <PCA955X_TYPE_LED>; |
| 1536 |
}; |
| 1537 |
|
| 1538 |
led@3 { |
| 1539 |
label = "nvme11"; |
| 1540 |
reg = <3>; |
| 1541 |
retain-state-shutdown; |
| 1542 |
default-state = "keep"; |
| 1543 |
type = <PCA955X_TYPE_LED>; |
| 1544 |
}; |
| 1545 |
|
| 1546 |
led@4 { |
| 1547 |
label = "nvme12"; |
| 1548 |
reg = <4>; |
| 1549 |
retain-state-shutdown; |
| 1550 |
default-state = "keep"; |
| 1551 |
type = <PCA955X_TYPE_LED>; |
| 1552 |
}; |
| 1553 |
|
| 1554 |
led@5 { |
| 1555 |
label = "nvme13"; |
| 1556 |
reg = <5>; |
| 1557 |
retain-state-shutdown; |
| 1558 |
default-state = "keep"; |
| 1559 |
type = <PCA955X_TYPE_LED>; |
| 1560 |
}; |
| 1561 |
|
| 1562 |
led@6 { |
| 1563 |
label = "nvme14"; |
| 1564 |
reg = <6>; |
| 1565 |
retain-state-shutdown; |
| 1566 |
default-state = "keep"; |
| 1567 |
type = <PCA955X_TYPE_LED>; |
| 1568 |
}; |
| 1569 |
|
| 1570 |
led@7 { |
| 1571 |
label = "nvme15"; |
| 1572 |
reg = <7>; |
| 1573 |
retain-state-shutdown; |
| 1574 |
default-state = "keep"; |
| 1575 |
type = <PCA955X_TYPE_LED>; |
| 1576 |
}; |
| 1577 |
}; |
| 1578 |
}; |
| 1579 |
|
| 1580 |
&i2c15 { |
| 1581 |
status = "okay"; |
| 1582 |
|
| 1583 |
eeprom@50 { |
| 1584 |
compatible = "atmel,24c64"; |
| 1585 |
reg = <0x50>; |
| 1586 |
}; |
| 1587 |
|
| 1588 |
pca9552@60 { |
| 1589 |
compatible = "nxp,pca9552"; |
| 1590 |
reg = <0x60>; |
| 1591 |
#address-cells = <1>; |
| 1592 |
#size-cells = <0>; |
| 1593 |
|
| 1594 |
gpio-controller; |
| 1595 |
#gpio-cells = <2>; |
| 1596 |
|
| 1597 |
led@0 { |
| 1598 |
label = "nvme16"; |
| 1599 |
reg = <0>; |
| 1600 |
retain-state-shutdown; |
| 1601 |
default-state = "keep"; |
| 1602 |
type = <PCA955X_TYPE_LED>; |
| 1603 |
}; |
| 1604 |
|
| 1605 |
led@1 { |
| 1606 |
label = "nvme17"; |
| 1607 |
reg = <1>; |
| 1608 |
retain-state-shutdown; |
| 1609 |
default-state = "keep"; |
| 1610 |
type = <PCA955X_TYPE_LED>; |
| 1611 |
}; |
| 1612 |
|
| 1613 |
led@2 { |
| 1614 |
label = "nvme18"; |
| 1615 |
reg = <2>; |
| 1616 |
retain-state-shutdown; |
| 1617 |
default-state = "keep"; |
| 1618 |
type = <PCA955X_TYPE_LED>; |
| 1619 |
}; |
| 1620 |
|
| 1621 |
led@3 { |
| 1622 |
label = "nvme19"; |
| 1623 |
reg = <3>; |
| 1624 |
retain-state-shutdown; |
| 1625 |
default-state = "keep"; |
| 1626 |
type = <PCA955X_TYPE_LED>; |
| 1627 |
}; |
| 1628 |
|
| 1629 |
led@4 { |
| 1630 |
label = "nvme20"; |
| 1631 |
reg = <4>; |
| 1632 |
retain-state-shutdown; |
| 1633 |
default-state = "keep"; |
| 1634 |
type = <PCA955X_TYPE_LED>; |
| 1635 |
}; |
| 1636 |
|
| 1637 |
led@5 { |
| 1638 |
label = "nvme21"; |
| 1639 |
reg = <5>; |
| 1640 |
retain-state-shutdown; |
| 1641 |
default-state = "keep"; |
| 1642 |
type = <PCA955X_TYPE_LED>; |
| 1643 |
}; |
| 1644 |
|
| 1645 |
led@6 { |
| 1646 |
label = "nvme22"; |
| 1647 |
reg = <6>; |
| 1648 |
retain-state-shutdown; |
| 1649 |
default-state = "keep"; |
| 1650 |
type = <PCA955X_TYPE_LED>; |
| 1651 |
}; |
| 1652 |
|
| 1653 |
led@7 { |
| 1654 |
label = "nvme23"; |
| 1655 |
reg = <7>; |
| 1656 |
retain-state-shutdown; |
| 1657 |
default-state = "keep"; |
| 1658 |
type = <PCA955X_TYPE_LED>; |
| 1659 |
}; |
| 1660 |
}; |
| 1661 |
}; |
| 1662 |
|
| 1663 |
&uart2 { |
| 1664 |
status = "okay"; |
| 1665 |
}; |
| 1666 |
|
| 1667 |
&vuart1 { |
| 1668 |
status = "okay"; |
| 1669 |
}; |
| 1670 |
|
| 1671 |
&vuart2 { |
| 1672 |
status = "okay"; |
| 1673 |
}; |
| 1674 |
|
| 1675 |
&lpc_ctrl { |
| 1676 |
status = "okay"; |
| 1677 |
memory-region = <&flash_memory>; |
| 1678 |
}; |
| 1679 |
|
| 1680 |
&mac2 { |
| 1681 |
status = "okay"; |
| 1682 |
pinctrl-names = "default"; |
| 1683 |
pinctrl-0 = <&pinctrl_rmii3_default>; |
| 1684 |
clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, |
| 1685 |
<&syscon ASPEED_CLK_MAC3RCLK>; |
| 1686 |
clock-names = "MACCLK", "RCLK"; |
| 1687 |
use-ncsi; |
| 1688 |
}; |
| 1689 |
|
| 1690 |
&mac3 { |
| 1691 |
status = "okay"; |
| 1692 |
pinctrl-names = "default"; |
| 1693 |
pinctrl-0 = <&pinctrl_rmii4_default>; |
| 1694 |
clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, |
| 1695 |
<&syscon ASPEED_CLK_MAC4RCLK>; |
| 1696 |
clock-names = "MACCLK", "RCLK"; |
| 1697 |
use-ncsi; |
| 1698 |
}; |
| 1699 |
|
| 1700 |
&wdt1 { |
| 1701 |
aspeed,reset-type = "none"; |
| 1702 |
aspeed,external-signal; |
| 1703 |
aspeed,ext-push-pull; |
| 1704 |
aspeed,ext-active-high; |
| 1705 |
|
| 1706 |
pinctrl-names = "default"; |
| 1707 |
pinctrl-0 = <&pinctrl_wdtrst1_default>; |
| 1708 |
}; |
| 1709 |
|
| 1710 |
&wdt2 { |
| 1711 |
status = "okay"; |
| 1712 |
}; |
| 1713 |
|
| 1714 |
&kcs2 { |
| 1715 |
status = "okay"; |
| 1716 |
aspeed,lpc-io-reg = <0xca8 0xcac>; |
| 1717 |
}; |
| 1718 |
|
| 1719 |
&kcs3 { |
| 1720 |
status = "okay"; |
| 1721 |
aspeed,lpc-io-reg = <0xca2>; |
| 1722 |
aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; |
| 1723 |
}; |
| 1724 |
|
| 1725 |
#include "ibm-power10-quad.dtsi" |