| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
// Copyright 2023 Facebook Inc. |
| 3 |
|
| 4 |
/dts-v1/; |
| 5 |
#include "aspeed-g6.dtsi" |
| 6 |
#include <dt-bindings/gpio/aspeed-gpio.h> |
| 7 |
#include <dt-bindings/i2c/i2c.h> |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "Facebook Harma"; |
| 11 |
compatible = "facebook,harma-bmc", "aspeed,ast2600"; |
| 12 |
|
| 13 |
aliases { |
| 14 |
serial0 = &uart1; |
| 15 |
serial1 = &uart2; |
| 16 |
serial2 = &uart4; |
| 17 |
serial4 = &uart5; |
| 18 |
|
| 19 |
i2c20 = &imux20; |
| 20 |
i2c21 = &imux21; |
| 21 |
i2c22 = &imux22; |
| 22 |
i2c23 = &imux23; |
| 23 |
i2c28 = &imux28; |
| 24 |
i2c29 = &imux29; |
| 25 |
i2c30 = &imux30; |
| 26 |
i2c31 = &imux31; |
| 27 |
|
| 28 |
spi1 = &spi_gpio; |
| 29 |
}; |
| 30 |
|
| 31 |
chosen { |
| 32 |
stdout-path = &uart5; |
| 33 |
}; |
| 34 |
|
| 35 |
memory@80000000 { |
| 36 |
device_type = "memory"; |
| 37 |
reg = <0x80000000 0x80000000>; |
| 38 |
}; |
| 39 |
|
| 40 |
iio-hwmon { |
| 41 |
compatible = "iio-hwmon"; |
| 42 |
io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, |
| 43 |
<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, |
| 44 |
<&adc1 2>; |
| 45 |
}; |
| 46 |
|
| 47 |
leds { |
| 48 |
compatible = "gpio-leds"; |
| 49 |
|
| 50 |
led-0 { |
| 51 |
label = "bmc_heartbeat_amber"; |
| 52 |
gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; |
| 53 |
linux,default-trigger = "heartbeat"; |
| 54 |
}; |
| 55 |
|
| 56 |
led-1 { |
| 57 |
label = "fp_id_amber"; |
| 58 |
default-state = "off"; |
| 59 |
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
| 60 |
}; |
| 61 |
|
| 62 |
led-2 { |
| 63 |
label = "power_blue"; |
| 64 |
default-state = "off"; |
| 65 |
gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
spi_gpio: spi { |
| 70 |
status = "okay"; |
| 71 |
compatible = "spi-gpio"; |
| 72 |
#address-cells = <1>; |
| 73 |
#size-cells = <0>; |
| 74 |
|
| 75 |
sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; |
| 76 |
mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; |
| 77 |
miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; |
| 78 |
num-chipselects = <1>; |
| 79 |
cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; |
| 80 |
|
| 81 |
tpm@0 { |
| 82 |
compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; |
| 83 |
spi-max-frequency = <33000000>; |
| 84 |
reg = <0>; |
| 85 |
}; |
| 86 |
}; |
| 87 |
}; |
| 88 |
|
| 89 |
// HOST BIOS Debug |
| 90 |
&uart1 { |
| 91 |
status = "okay"; |
| 92 |
}; |
| 93 |
|
| 94 |
// SOL Host Console |
| 95 |
&uart2 { |
| 96 |
status = "okay"; |
| 97 |
pinctrl-0 = <>; |
| 98 |
}; |
| 99 |
|
| 100 |
// SOL BMC Console |
| 101 |
&uart4 { |
| 102 |
status = "okay"; |
| 103 |
pinctrl-0 = <>; |
| 104 |
}; |
| 105 |
|
| 106 |
// BMC Debug Console |
| 107 |
&uart5 { |
| 108 |
status = "okay"; |
| 109 |
}; |
| 110 |
|
| 111 |
// MTIA |
| 112 |
&uart6 { |
| 113 |
status = "okay"; |
| 114 |
}; |
| 115 |
|
| 116 |
&uart_routing { |
| 117 |
status = "okay"; |
| 118 |
}; |
| 119 |
|
| 120 |
&wdt1 { |
| 121 |
status = "okay"; |
| 122 |
pinctrl-names = "default"; |
| 123 |
pinctrl-0 = <&pinctrl_wdtrst1_default>; |
| 124 |
aspeed,reset-type = "soc"; |
| 125 |
aspeed,external-signal; |
| 126 |
aspeed,ext-push-pull; |
| 127 |
aspeed,ext-active-high; |
| 128 |
aspeed,ext-pulse-duration = <256>; |
| 129 |
}; |
| 130 |
|
| 131 |
&mac3 { |
| 132 |
status = "okay"; |
| 133 |
pinctrl-names = "default"; |
| 134 |
pinctrl-0 = <&pinctrl_rmii4_default>; |
| 135 |
use-ncsi; |
| 136 |
}; |
| 137 |
|
| 138 |
&fmc { |
| 139 |
status = "okay"; |
| 140 |
|
| 141 |
flash@0 { |
| 142 |
status = "okay"; |
| 143 |
m25p,fast-read; |
| 144 |
label = "bmc"; |
| 145 |
spi-max-frequency = <50000000>; |
| 146 |
#include "openbmc-flash-layout-128.dtsi" |
| 147 |
}; |
| 148 |
|
| 149 |
flash@1 { |
| 150 |
status = "okay"; |
| 151 |
m25p,fast-read; |
| 152 |
label = "alt-bmc"; |
| 153 |
spi-max-frequency = <50000000>; |
| 154 |
}; |
| 155 |
}; |
| 156 |
|
| 157 |
// BIOS Flash |
| 158 |
&spi2 { |
| 159 |
status = "okay"; |
| 160 |
pinctrl-names = "default"; |
| 161 |
pinctrl-0 = <&pinctrl_spi2_default>; |
| 162 |
|
| 163 |
flash@0 { |
| 164 |
status = "okay"; |
| 165 |
m25p,fast-read; |
| 166 |
label = "pnor"; |
| 167 |
spi-max-frequency = <12000000>; |
| 168 |
spi-tx-bus-width = <2>; |
| 169 |
spi-rx-bus-width = <2>; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
&kcs2 { |
| 174 |
status = "okay"; |
| 175 |
aspeed,lpc-io-reg = <0xca8>; |
| 176 |
}; |
| 177 |
|
| 178 |
&kcs3 { |
| 179 |
status = "okay"; |
| 180 |
aspeed,lpc-io-reg = <0xca2>; |
| 181 |
}; |
| 182 |
|
| 183 |
&i2c0 { |
| 184 |
status = "okay"; |
| 185 |
|
| 186 |
pwm@5e { |
| 187 |
compatible = "maxim,max31790"; |
| 188 |
reg = <0x5e>; |
| 189 |
}; |
| 190 |
|
| 191 |
power-sensor@40 { |
| 192 |
compatible = "ti,ina238"; |
| 193 |
reg = <0x40>; |
| 194 |
shunt-resistor = <1000>; |
| 195 |
}; |
| 196 |
|
| 197 |
power-sensor@41 { |
| 198 |
compatible = "ti,ina238"; |
| 199 |
reg = <0x41>; |
| 200 |
shunt-resistor = <1000>; |
| 201 |
}; |
| 202 |
|
| 203 |
power-sensor@44 { |
| 204 |
compatible = "ti,ina238"; |
| 205 |
reg = <0x44>; |
| 206 |
shunt-resistor = <1000>; |
| 207 |
}; |
| 208 |
|
| 209 |
power-sensor@45 { |
| 210 |
compatible = "ti,ina238"; |
| 211 |
reg = <0x45>; |
| 212 |
shunt-resistor = <1000>; |
| 213 |
}; |
| 214 |
|
| 215 |
temperature-sensor@4b { |
| 216 |
compatible = "ti,tmp75"; |
| 217 |
reg = <0x4b>; |
| 218 |
}; |
| 219 |
|
| 220 |
gpio@12 { |
| 221 |
compatible = "nxp,pca9555"; |
| 222 |
reg = <0x12>; |
| 223 |
gpio-controller; |
| 224 |
#gpio-cells = <2>; |
| 225 |
interrupt-parent = <&sgpiom0>; |
| 226 |
interrupts = <116 IRQ_TYPE_LEVEL_LOW>; |
| 227 |
|
| 228 |
gpio-line-names = |
| 229 |
"","", |
| 230 |
"","", |
| 231 |
"","", |
| 232 |
"","", |
| 233 |
"","", |
| 234 |
"","", |
| 235 |
"","fcb2-activate", |
| 236 |
"",""; |
| 237 |
}; |
| 238 |
}; |
| 239 |
|
| 240 |
&i2c1 { |
| 241 |
status = "okay"; |
| 242 |
|
| 243 |
mctp-controller; |
| 244 |
multi-master; |
| 245 |
|
| 246 |
mctp@10 { |
| 247 |
compatible = "mctp-i2c-controller"; |
| 248 |
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; |
| 249 |
}; |
| 250 |
|
| 251 |
temperature-sensor@4b { |
| 252 |
compatible = "ti,tmp75"; |
| 253 |
reg = <0x4b>; |
| 254 |
}; |
| 255 |
|
| 256 |
// MB NIC FRU |
| 257 |
eeprom@50 { |
| 258 |
compatible = "atmel,24c64"; |
| 259 |
reg = <0x50>; |
| 260 |
}; |
| 261 |
}; |
| 262 |
|
| 263 |
&i2c2 { |
| 264 |
status = "okay"; |
| 265 |
|
| 266 |
pwm@5e { |
| 267 |
compatible = "maxim,max31790"; |
| 268 |
reg = <0x5e>; |
| 269 |
}; |
| 270 |
|
| 271 |
power-sensor@40 { |
| 272 |
compatible = "ti,ina238"; |
| 273 |
reg = <0x40>; |
| 274 |
shunt-resistor = <1000>; |
| 275 |
}; |
| 276 |
|
| 277 |
power-sensor@41 { |
| 278 |
compatible = "ti,ina238"; |
| 279 |
reg = <0x41>; |
| 280 |
shunt-resistor = <1000>; |
| 281 |
}; |
| 282 |
|
| 283 |
power-sensor@44 { |
| 284 |
compatible = "ti,ina238"; |
| 285 |
reg = <0x44>; |
| 286 |
shunt-resistor = <1000>; |
| 287 |
}; |
| 288 |
|
| 289 |
power-sensor@45 { |
| 290 |
compatible = "ti,ina238"; |
| 291 |
reg = <0x45>; |
| 292 |
shunt-resistor = <1000>; |
| 293 |
}; |
| 294 |
|
| 295 |
temperature-sensor@4b { |
| 296 |
compatible = "ti,tmp75"; |
| 297 |
reg = <0x4b>; |
| 298 |
}; |
| 299 |
|
| 300 |
gpio@12 { |
| 301 |
compatible = "nxp,pca9555"; |
| 302 |
reg = <0x12>; |
| 303 |
gpio-controller; |
| 304 |
#gpio-cells = <2>; |
| 305 |
interrupt-parent = <&sgpiom0>; |
| 306 |
interrupts = <114 IRQ_TYPE_LEVEL_LOW>; |
| 307 |
|
| 308 |
gpio-line-names = |
| 309 |
"","", |
| 310 |
"","", |
| 311 |
"","", |
| 312 |
"","", |
| 313 |
"","", |
| 314 |
"","", |
| 315 |
"","fcb1-activate", |
| 316 |
"",""; |
| 317 |
}; |
| 318 |
}; |
| 319 |
|
| 320 |
&i2c3 { |
| 321 |
status = "okay"; |
| 322 |
|
| 323 |
i2c-mux@70 { |
| 324 |
compatible = "nxp,pca9543"; |
| 325 |
reg = <0x70>; |
| 326 |
#address-cells = <1>; |
| 327 |
#size-cells = <0>; |
| 328 |
|
| 329 |
imux20: i2c@0 { |
| 330 |
#address-cells = <1>; |
| 331 |
#size-cells = <0>; |
| 332 |
reg = <0>; |
| 333 |
//Retimer Flash |
| 334 |
eeprom@50 { |
| 335 |
compatible = "atmel,24c2048"; |
| 336 |
reg = <0x50>; |
| 337 |
pagesize = <128>; |
| 338 |
}; |
| 339 |
}; |
| 340 |
imux21: i2c@1 { |
| 341 |
#address-cells = <1>; |
| 342 |
#size-cells = <0>; |
| 343 |
reg = <1>; |
| 344 |
retimer@24 { |
| 345 |
compatible = "asteralabs,pt5161l"; |
| 346 |
reg = <0x24>; |
| 347 |
}; |
| 348 |
}; |
| 349 |
}; |
| 350 |
}; |
| 351 |
|
| 352 |
&i2c4 { |
| 353 |
status = "okay"; |
| 354 |
// PDB FRU |
| 355 |
eeprom@52 { |
| 356 |
compatible = "atmel,24c64"; |
| 357 |
reg = <0x52>; |
| 358 |
}; |
| 359 |
|
| 360 |
power-monitor@69 { |
| 361 |
compatible = "pmbus"; |
| 362 |
reg = <0x69>; |
| 363 |
}; |
| 364 |
|
| 365 |
temperature-sensor@49 { |
| 366 |
compatible = "ti,tmp75"; |
| 367 |
reg = <0x49>; |
| 368 |
}; |
| 369 |
|
| 370 |
power-monitor@44 { |
| 371 |
compatible = "lltc,ltc4287"; |
| 372 |
reg = <0x44>; |
| 373 |
shunt-resistor-micro-ohms = <250>; |
| 374 |
}; |
| 375 |
|
| 376 |
power-monitor@40 { |
| 377 |
compatible = "infineon,xdp710"; |
| 378 |
reg = <0x40>; |
| 379 |
}; |
| 380 |
|
| 381 |
power-sensor@45 { |
| 382 |
compatible = "ti,ina238"; |
| 383 |
reg = <0x45>; |
| 384 |
shunt-resistor = <500>; |
| 385 |
}; |
| 386 |
}; |
| 387 |
|
| 388 |
&i2c5 { |
| 389 |
status = "okay"; |
| 390 |
}; |
| 391 |
|
| 392 |
&i2c6 { |
| 393 |
status = "okay"; |
| 394 |
|
| 395 |
i2c-mux@70 { |
| 396 |
compatible = "nxp,pca9543"; |
| 397 |
reg = <0x70>; |
| 398 |
#address-cells = <1>; |
| 399 |
#size-cells = <0>; |
| 400 |
|
| 401 |
imux22: i2c@0 { |
| 402 |
#address-cells = <1>; |
| 403 |
#size-cells = <0>; |
| 404 |
reg = <0>; |
| 405 |
|
| 406 |
power-monitor@45 { |
| 407 |
compatible = "ti,ina230"; |
| 408 |
reg = <0x45>; |
| 409 |
}; |
| 410 |
|
| 411 |
}; |
| 412 |
imux23: i2c@1 { |
| 413 |
#address-cells = <1>; |
| 414 |
#size-cells = <0>; |
| 415 |
reg = <1>; |
| 416 |
|
| 417 |
power-monitor@45 { |
| 418 |
compatible = "ti,ina230"; |
| 419 |
reg = <0x45>; |
| 420 |
}; |
| 421 |
}; |
| 422 |
}; |
| 423 |
}; |
| 424 |
|
| 425 |
&i2c7 { |
| 426 |
status = "okay"; |
| 427 |
}; |
| 428 |
|
| 429 |
&i2c8 { |
| 430 |
status = "okay"; |
| 431 |
}; |
| 432 |
|
| 433 |
&i2c9 { |
| 434 |
status = "okay"; |
| 435 |
|
| 436 |
mctp-controller; |
| 437 |
multi-master; |
| 438 |
|
| 439 |
mctp@10 { |
| 440 |
compatible = "mctp-i2c-controller"; |
| 441 |
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; |
| 442 |
}; |
| 443 |
|
| 444 |
gpio@30 { |
| 445 |
compatible = "nxp,pca9555"; |
| 446 |
reg = <0x30>; |
| 447 |
gpio-controller; |
| 448 |
#gpio-cells = <2>; |
| 449 |
}; |
| 450 |
gpio@31 { |
| 451 |
compatible = "nxp,pca9555"; |
| 452 |
reg = <0x31>; |
| 453 |
gpio-controller; |
| 454 |
#gpio-cells = <2>; |
| 455 |
}; |
| 456 |
|
| 457 |
// PTTV FRU |
| 458 |
eeprom@52 { |
| 459 |
compatible = "atmel,24c64"; |
| 460 |
reg = <0x52>; |
| 461 |
}; |
| 462 |
}; |
| 463 |
|
| 464 |
&i2c11 { |
| 465 |
status = "okay"; |
| 466 |
|
| 467 |
gpio@13 { |
| 468 |
compatible = "nxp,pca9555"; |
| 469 |
reg = <0x13>; |
| 470 |
gpio-controller; |
| 471 |
#gpio-cells = <2>; |
| 472 |
interrupt-parent = <&sgpiom0>; |
| 473 |
interrupts = <222 IRQ_TYPE_LEVEL_LOW>; |
| 474 |
|
| 475 |
gpio-line-names = |
| 476 |
"","", |
| 477 |
"","", |
| 478 |
"","", |
| 479 |
"","health-mmc", |
| 480 |
"","", |
| 481 |
"","", |
| 482 |
"","", |
| 483 |
"",""; |
| 484 |
}; |
| 485 |
|
| 486 |
gpio@30 { |
| 487 |
compatible = "nxp,pca9555"; |
| 488 |
reg = <0x30>; |
| 489 |
gpio-controller; |
| 490 |
#gpio-cells = <2>; |
| 491 |
}; |
| 492 |
gpio@31 { |
| 493 |
compatible = "nxp,pca9555"; |
| 494 |
reg = <0x31>; |
| 495 |
gpio-controller; |
| 496 |
#gpio-cells = <2>; |
| 497 |
}; |
| 498 |
|
| 499 |
// Aegis FRU |
| 500 |
eeprom@52 { |
| 501 |
compatible = "atmel,24c64"; |
| 502 |
reg = <0x52>; |
| 503 |
}; |
| 504 |
}; |
| 505 |
|
| 506 |
&i2c12 { |
| 507 |
status = "okay"; |
| 508 |
retimer@24 { |
| 509 |
compatible = "asteralabs,pt5161l"; |
| 510 |
reg = <0x24>; |
| 511 |
}; |
| 512 |
}; |
| 513 |
|
| 514 |
&i2c13 { |
| 515 |
status = "okay"; |
| 516 |
|
| 517 |
i2c-mux@70 { |
| 518 |
compatible = "nxp,pca9545"; |
| 519 |
reg = <0x70>; |
| 520 |
#address-cells = <1>; |
| 521 |
#size-cells = <0>; |
| 522 |
|
| 523 |
imux28: i2c@0 { |
| 524 |
#address-cells = <1>; |
| 525 |
#size-cells = <0>; |
| 526 |
reg = <0>; |
| 527 |
power-sensor@20 { |
| 528 |
compatible = "mps,mp5990"; |
| 529 |
reg = <0x20>; |
| 530 |
}; |
| 531 |
power-monitor@61 { |
| 532 |
compatible = "isil,isl69260"; |
| 533 |
reg = <0x61>; |
| 534 |
}; |
| 535 |
power-monitor@62 { |
| 536 |
compatible = "isil,isl69260"; |
| 537 |
reg = <0x62>; |
| 538 |
}; |
| 539 |
power-monitor@63 { |
| 540 |
compatible = "isil,isl69260"; |
| 541 |
reg = <0x63>; |
| 542 |
}; |
| 543 |
power-monitor@64 { |
| 544 |
compatible = "infineon,xdpe152c4"; |
| 545 |
reg = <0x64>; |
| 546 |
}; |
| 547 |
power-monitor@66 { |
| 548 |
compatible = "infineon,xdpe152c4"; |
| 549 |
reg = <0x66>; |
| 550 |
}; |
| 551 |
power-monitor@68 { |
| 552 |
compatible = "infineon,xdpe152c4"; |
| 553 |
reg = <0x68>; |
| 554 |
}; |
| 555 |
}; |
| 556 |
imux29: i2c@1 { |
| 557 |
#address-cells = <1>; |
| 558 |
#size-cells = <0>; |
| 559 |
reg = <1>; |
| 560 |
//MB FRU |
| 561 |
eeprom@54 { |
| 562 |
compatible = "atmel,24c64"; |
| 563 |
reg = <0x54>; |
| 564 |
}; |
| 565 |
|
| 566 |
adc@1d { |
| 567 |
compatible = "ti,adc128d818"; |
| 568 |
reg = <0x1d>; |
| 569 |
ti,mode = /bits/ 8 <1>; |
| 570 |
}; |
| 571 |
|
| 572 |
adc@1f { |
| 573 |
compatible = "ti,adc128d818"; |
| 574 |
reg = <0x1f>; |
| 575 |
ti,mode = /bits/ 8 <1>; |
| 576 |
}; |
| 577 |
|
| 578 |
}; |
| 579 |
imux30: i2c@2 { |
| 580 |
#address-cells = <1>; |
| 581 |
#size-cells = <0>; |
| 582 |
reg = <2>; |
| 583 |
}; |
| 584 |
imux31: i2c@3 { |
| 585 |
#address-cells = <1>; |
| 586 |
#size-cells = <0>; |
| 587 |
reg = <3>; |
| 588 |
|
| 589 |
rtc@51 { |
| 590 |
compatible = "nxp,pcf8563"; |
| 591 |
reg = <0x51>; |
| 592 |
}; |
| 593 |
}; |
| 594 |
}; |
| 595 |
}; |
| 596 |
|
| 597 |
// To Debug card |
| 598 |
&i2c14 { |
| 599 |
status = "okay"; |
| 600 |
multi-master; |
| 601 |
|
| 602 |
ipmb@10 { |
| 603 |
compatible = "ipmb-dev"; |
| 604 |
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; |
| 605 |
i2c-protocol; |
| 606 |
}; |
| 607 |
}; |
| 608 |
|
| 609 |
&i2c15 { |
| 610 |
status = "okay"; |
| 611 |
|
| 612 |
// SCM FRU |
| 613 |
eeprom@50 { |
| 614 |
compatible = "atmel,24c64"; |
| 615 |
reg = <0x50>; |
| 616 |
}; |
| 617 |
|
| 618 |
// BSM FRU |
| 619 |
eeprom@56 { |
| 620 |
compatible = "atmel,24c64"; |
| 621 |
reg = <0x56>; |
| 622 |
}; |
| 623 |
}; |
| 624 |
|
| 625 |
&adc0 { |
| 626 |
aspeed,int-vref-microvolt = <2500000>; |
| 627 |
status = "okay"; |
| 628 |
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default |
| 629 |
&pinctrl_adc2_default &pinctrl_adc3_default |
| 630 |
&pinctrl_adc4_default &pinctrl_adc5_default |
| 631 |
&pinctrl_adc6_default &pinctrl_adc7_default>; |
| 632 |
}; |
| 633 |
|
| 634 |
&adc1 { |
| 635 |
aspeed,int-vref-microvolt = <2500000>; |
| 636 |
status = "okay"; |
| 637 |
pinctrl-names = "default"; |
| 638 |
pinctrl-0 = <&pinctrl_adc10_default>; |
| 639 |
}; |
| 640 |
|
| 641 |
&ehci0 { |
| 642 |
status = "okay"; |
| 643 |
}; |
| 644 |
|
| 645 |
&gpio0 { |
| 646 |
pinctrl-names = "default"; |
| 647 |
gpio-line-names = |
| 648 |
/*A0-A7*/ "","","","","","","","", |
| 649 |
/*B0-B7*/ "","","","", |
| 650 |
"bmc-spi-mux-select-0","led-identify","","", |
| 651 |
/*C0-C7*/ "reset-cause-platrst","","","","", |
| 652 |
"power-hsc-good","power-chassis-good","", |
| 653 |
/*D0-D7*/ "","","sol-uart-select","","","","","", |
| 654 |
/*E0-E7*/ "","","","","","","","", |
| 655 |
/*F0-F7*/ "","","","","","","","", |
| 656 |
/*G0-G7*/ "","","","","","","","", |
| 657 |
/*H0-H7*/ "","","","","","","","", |
| 658 |
/*I0-I7*/ "","","","","","","","", |
| 659 |
/*J0-J7*/ "","","","","","","","", |
| 660 |
/*K0-K7*/ "","","","","","","","", |
| 661 |
/*L0-L7*/ "","","","", |
| 662 |
"leakage-detect-alert","","","", |
| 663 |
/*M0-M7*/ "","","","","","","","", |
| 664 |
/*N0-N7*/ "led-postcode-0","led-postcode-1", |
| 665 |
"led-postcode-2","led-postcode-3", |
| 666 |
"led-postcode-4","led-postcode-5", |
| 667 |
"led-postcode-6","led-postcode-7", |
| 668 |
/*O0-O7*/ "","","","","","","","", |
| 669 |
/*P0-P7*/ "power-button","power-host-control", |
| 670 |
"reset-button","","led-power","","","", |
| 671 |
/*Q0-Q7*/ |
| 672 |
"","","","", |
| 673 |
"","power-chassis-control","","uart-switch-button", |
| 674 |
/*R0-R7*/ "","","","","","","","", |
| 675 |
/*S0-S7*/ "","","","","","","","", |
| 676 |
/*T0-T7*/ "","","","","","","","", |
| 677 |
/*U0-U7*/ "","","","","","","led-identify-gate","", |
| 678 |
/*V0-V7*/ "","","","", |
| 679 |
"","", |
| 680 |
"","", |
| 681 |
/*W0-W7*/ "","","","","","","","", |
| 682 |
/*X0-X7*/ "","","","","","","","", |
| 683 |
/*Y0-Y7*/ "","","","","","","","", |
| 684 |
/*Z0-Z7*/ "","","","","","","presence-post-card",""; |
| 685 |
}; |
| 686 |
|
| 687 |
&gpio1 { |
| 688 |
gpio-line-names = |
| 689 |
/*18A0-18A7*/ "ac-power-button","","","","","","","", |
| 690 |
/*18B0-18B7*/ "","","","","","","","", |
| 691 |
/*18C0-18C7*/ "","","","","","","","", |
| 692 |
/*18D0-18D7*/ "","","","","","","","", |
| 693 |
/*18E0-18E3*/ "","","","","","","",""; |
| 694 |
}; |
| 695 |
|
| 696 |
&sgpiom0 { |
| 697 |
status = "okay"; |
| 698 |
ngpios = <128>; |
| 699 |
bus-frequency = <2000000>; |
| 700 |
gpio-line-names = |
| 701 |
/*in - out - in - out */ |
| 702 |
/*A0-A3 line 0-7*/ |
| 703 |
"presence-scm-cable","power-config-disable-e1s-0", |
| 704 |
"","", |
| 705 |
"","power-config-disable-e1s-1", |
| 706 |
"","", |
| 707 |
/*A4-A7 line 8-15*/ |
| 708 |
"","power-config-asic-module-enable", |
| 709 |
"power-p3v3-standby","power-config-asic-power-good", |
| 710 |
"power-p1v8-good","power-config-pdb-power-good", |
| 711 |
"presence-cpu","smi-control-n", |
| 712 |
/*B0-B3 line 16-23*/ |
| 713 |
"","nmi-control-n", |
| 714 |
"power-pvdd33-s5","nmi-control-sync-flood-n", |
| 715 |
"","", |
| 716 |
"power-pvdd18-s5","", |
| 717 |
/*B4-B7 line 24-31*/ |
| 718 |
"","FM_CPU_SP5R1", |
| 719 |
"reset-cause-rsmrst","FM_CPU_SP5R2", |
| 720 |
"","FM_CPU_SP5R3", |
| 721 |
"","FM_CPU_SP5R4", |
| 722 |
/*C0-C3 line 32-39*/ |
| 723 |
"","FM_CPU0_SA0", |
| 724 |
"","FM_CPU0_SA1", |
| 725 |
"","rt-cpu0-p0-enable", |
| 726 |
"","rt-cpu0-p1-enable", |
| 727 |
/*C4-C7 line 40-47*/ |
| 728 |
"","smb-rt-rom-p0-select", |
| 729 |
"","smb-rt-rom-p1-select", |
| 730 |
"","i3c-cpu-mux0-oe-n", |
| 731 |
"","i3c-cpu-mux0-select", |
| 732 |
/*D0-D3 line 48-55*/ |
| 733 |
"","i3c-cpu-mux1-oe-n", |
| 734 |
"","i3c-cpu-mux1-select", |
| 735 |
"","reset-control-bmc", |
| 736 |
"","reset-control-cpu0-p0-mux", |
| 737 |
/*D4-D7 line 56-63*/ |
| 738 |
"","reset-control-cpu0-p1-mux", |
| 739 |
"","reset-control-e1s-mux", |
| 740 |
"power-host-good","reset-control-mb-mux", |
| 741 |
"host0-ready","reset-control-smb-e1s-0", |
| 742 |
/*E0-E3 line 64-71*/ |
| 743 |
"","reset-control-smb-e1s-1", |
| 744 |
"post-end-n","reset-control-srst", |
| 745 |
"presence-e1s-0","reset-control-usb-hub", |
| 746 |
"","reset-control", |
| 747 |
/*E4-E7 line 72-79*/ |
| 748 |
"presence-e1s-1","reset-control-cpu-kbrst", |
| 749 |
"","reset-control-platrst", |
| 750 |
"","bmc-jtag-mux-select-0", |
| 751 |
"","bmc-jtag-mux-select-1", |
| 752 |
/*F0-F3 line 80-87*/ |
| 753 |
"","bmc-jtag-select", |
| 754 |
"","bmc-ready-n", |
| 755 |
"","bmc-ready-sgpio", |
| 756 |
"","rt-cpu0-p0-force-enable", |
| 757 |
/*F4-F7 line 88-95*/ |
| 758 |
"presence-asic-modules-0","rt-cpu0-p1-force-enable", |
| 759 |
"presence-asic-modules-1","bios-debug-msg-disable", |
| 760 |
"power-asic-good","uart-control-buffer-select", |
| 761 |
"presence-cmm","ac-control-n", |
| 762 |
/*G0-G3 line 96-103*/ |
| 763 |
"FM_CPU_CORETYPE2","", |
| 764 |
"FM_CPU_CORETYPE1","rtc-battery-voltage-read-enable", |
| 765 |
"FM_CPU_CORETYPE0","", |
| 766 |
"FM_BOARD_REV_ID5","", |
| 767 |
/*G4-G7 line 104-111*/ |
| 768 |
"FM_BOARD_REV_ID4","", |
| 769 |
"FM_BOARD_REV_ID3","", |
| 770 |
"FM_BOARD_REV_ID2","", |
| 771 |
"FM_BOARD_REV_ID1","", |
| 772 |
/*H0-H3 line 112-119*/ |
| 773 |
"FM_BOARD_REV_ID0","reset-control-cmos-clear", |
| 774 |
"","","","","","", |
| 775 |
/*H4-H7 line 120-127*/ |
| 776 |
"","", |
| 777 |
"reset-control-pcie-expansion-3","", |
| 778 |
"reset-control-pcie-expansion-2","", |
| 779 |
"reset-control-pcie-expansion-1","", |
| 780 |
/*I0-I3 line 128-135*/ |
| 781 |
"reset-control-pcie-expansion-0","", |
| 782 |
"FM_EXP_SLOT_ID1","", |
| 783 |
"FM_EXP_SLOT_ID0","", |
| 784 |
"","", |
| 785 |
/*I4-I7 line 136-143*/ |
| 786 |
"","","","","","","","", |
| 787 |
/*J0-J3 line 144-151*/ |
| 788 |
"","","power-card-enable","","","","","", |
| 789 |
/*J4-J7 line 152-159*/ |
| 790 |
"SLOT_ID_BCB_0","", |
| 791 |
"SLOT_ID_BCB_1","", |
| 792 |
"SLOT_ID_BCB_2","", |
| 793 |
"SLOT_ID_BCB_3","", |
| 794 |
/*K0-K3 line 160-167*/ |
| 795 |
"","","","","","","P0_I3C_APML_ALERT_L","", |
| 796 |
/*K4-K7 line 168-175*/ |
| 797 |
"","","","","","","irq-uv-detect-alert","", |
| 798 |
/*L0-L3 line 176-183*/ |
| 799 |
"irq-hsc-alert","", |
| 800 |
"cpu0-prochot-alert","", |
| 801 |
"cpu0-thermtrip-alert","", |
| 802 |
"reset-cause-pcie","", |
| 803 |
/*L4-L7 line 184-191*/ |
| 804 |
"pvdd11-ocp-alert","", |
| 805 |
"power-fault-n","", |
| 806 |
"asic0-card-type-detection0-n","", |
| 807 |
"asic0-card-type-detection1-n","", |
| 808 |
/*M0-M3 line 192-199*/ |
| 809 |
"asic0-card-type-detection2-n","", |
| 810 |
"uart-switch-lsb","", |
| 811 |
"uart-switch-msb","", |
| 812 |
"power-12v-memory-good","", |
| 813 |
/*M4-M7 line 200-207*/ |
| 814 |
"","","","","","","","", |
| 815 |
/*N0-N3 line 208-215*/ |
| 816 |
"","","","","","","","", |
| 817 |
/*N4-N7 line 216-223*/ |
| 818 |
"","","","","","","","", |
| 819 |
/*O0-O3 line 224-231*/ |
| 820 |
"","", |
| 821 |
"irq-pvddcore0-ocp-alert","", |
| 822 |
"irq-pvddcore1-ocp-alert","", |
| 823 |
"","", |
| 824 |
/*O4-O7 line 232-239*/ |
| 825 |
"","","","", |
| 826 |
"presence-lower-fanboard1","", |
| 827 |
"presence-lower-fanboard2","", |
| 828 |
/*P0-P3 line 240-247*/ |
| 829 |
"presence-upper-fanboard1","", |
| 830 |
"presence-upper-fanboard2","", |
| 831 |
"","","","", |
| 832 |
/*P4-P7 line 248-255*/ |
| 833 |
"","","","","","","",""; |
| 834 |
}; |