Debian Codegraph @

arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 // Copyright 2023 IBM Corp.
3 /dts-v1/;
4
5 #include "aspeed-g6.dtsi"
6 #include <dt-bindings/gpio/aspeed-gpio.h>
7 #include <dt-bindings/i2c/i2c.h>
8 #include <dt-bindings/leds/leds-pca955x.h>
9
10 / {
11 model = "System1";
12 compatible = "ibm,system1-bmc", "aspeed,ast2600";
13
14 aliases {
15 i2c16 = &i2c8mux1chn0;
16 i2c17 = &i2c8mux1chn1;
17 i2c18 = &i2c8mux1chn2;
18 i2c19 = &i2c8mux1chn3;
19 i2c20 = &i2c8mux1chn4;
20 i2c21 = &i2c8mux1chn5;
21 i2c22 = &i2c8mux1chn6;
22 i2c23 = &i2c8mux1chn7;
23 i2c24 = &i2c3mux0chn0;
24 i2c25 = &i2c3mux0chn1;
25 i2c26 = &i2c3mux0chn2;
26 i2c27 = &i2c3mux0chn3;
27 i2c28 = &i2c3mux0chn4;
28 i2c29 = &i2c3mux0chn5;
29 i2c30 = &i2c3mux0chn6;
30 i2c31 = &i2c3mux0chn7;
31 i2c32 = &i2c6mux0chn0;
32 i2c33 = &i2c6mux0chn1;
33 i2c34 = &i2c6mux0chn2;
34 i2c35 = &i2c6mux0chn3;
35 i2c36 = &i2c6mux0chn4;
36 i2c37 = &i2c6mux0chn5;
37 i2c38 = &i2c6mux0chn6;
38 i2c39 = &i2c6mux0chn7;
39 i2c40 = &i2c7mux0chn0;
40 i2c41 = &i2c7mux0chn1;
41 i2c42 = &i2c7mux0chn2;
42 i2c43 = &i2c7mux0chn3;
43 i2c44 = &i2c7mux0chn4;
44 i2c45 = &i2c7mux0chn5;
45 i2c46 = &i2c7mux0chn6;
46 i2c47 = &i2c7mux0chn7;
47 i2c48 = &i2c8mux0chn0;
48 i2c49 = &i2c8mux0chn1;
49 i2c50 = &i2c8mux0chn2;
50 i2c51 = &i2c8mux0chn3;
51 i2c52 = &i2c8mux0chn4;
52 i2c53 = &i2c8mux0chn5;
53 i2c54 = &i2c8mux0chn6;
54 i2c55 = &i2c8mux0chn7;
55 i2c56 = &i2c14mux0chn0;
56 i2c57 = &i2c14mux0chn1;
57 i2c58 = &i2c14mux0chn2;
58 i2c59 = &i2c14mux0chn3;
59 i2c60 = &i2c14mux0chn4;
60 i2c61 = &i2c14mux0chn5;
61 i2c62 = &i2c14mux0chn6;
62 i2c63 = &i2c14mux0chn7;
63 i2c64 = &i2c15mux0chn0;
64 i2c65 = &i2c15mux0chn1;
65 i2c66 = &i2c15mux0chn2;
66 i2c67 = &i2c15mux0chn3;
67 i2c68 = &i2c15mux0chn4;
68 i2c69 = &i2c15mux0chn5;
69 i2c70 = &i2c15mux0chn6;
70 i2c71 = &i2c15mux0chn7;
71 };
72
73 chosen {
74 stdout-path = "uart5:115200n8";
75 };
76
77 memory@80000000 {
78 device_type = "memory";
79 reg = <0x80000000 0x40000000>;
80 };
81
82 reserved-memory {
83 #address-cells = <1>;
84 #size-cells = <1>;
85 ranges;
86
87 eventlog: tcg-event-log@b3d00000 {
88 no-map;
89 reg = <0xb3d00000 0x100000>;
90 };
91
92 ramoops@b3e00000 {
93 compatible = "ramoops";
94 reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
95 record-size = <0x8000>;
96 console-size = <0x8000>;
97 ftrace-size = <0x8000>;
98 pmsg-size = <0x8000>;
99 max-reason = <3>; /* KMSG_DUMP_EMERG */
100 };
101
102 /* LPC FW cycle bridge region requires natural alignment */
103 flash_memory: region@b4000000 {
104 no-map;
105 reg = <0xb4000000 0x04000000>; /* 64M */
106 };
107
108 /* VGA region is dictated by hardware strapping */
109 vga_memory: region@bf000000 {
110 no-map;
111 compatible = "shared-dma-pool";
112 reg = <0xbf000000 0x01000000>; /* 16M */
113 };
114 };
115
116 leds {
117 compatible = "gpio-leds";
118
119 led-bmc-ready {
120 gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
121 };
122
123 led-bmc-hb {
124 gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
125 };
126
127 led-rear-enc-fault0 {
128 gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
129 };
130
131 led-rear-enc-id0 {
132 gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
133 };
134
135 led-fan0-fault {
136 gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
137 };
138
139 led-fan1-fault {
140 gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
141 };
142
143 led-fan2-fault {
144 gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
145 };
146
147 led-fan3-fault {
148 gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
149 };
150
151 led-fan4-fault {
152 gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
153 };
154
155 led-fan5-fault {
156 gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
157 };
158
159 led-fan6-fault {
160 gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
161 };
162
163 led-nvmed0-fault {
164 gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
165 };
166
167 led-nvmed1-fault {
168 gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
169 };
170
171 led-nvmed2-fault {
172 gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
173 };
174
175 led-nvmed3-fault {
176 gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
177 };
178 };
179
180 gpio-keys-polled {
181 compatible = "gpio-keys-polled";
182 poll-interval = <1000>;
183
184 event-nvme0-presence {
185 label = "nvme0-presence";
186 gpios = <&pca4 0 GPIO_ACTIVE_LOW>;
187 linux,code = <0>;
188 };
189
190 event-nvme1-presence {
191 label = "nvme1-presence";
192 gpios = <&pca4 1 GPIO_ACTIVE_LOW>;
193 linux,code = <1>;
194 };
195
196 event-nvme2-presence {
197 label = "nvme2-presence";
198 gpios = <&pca4 2 GPIO_ACTIVE_LOW>;
199 linux,code = <2>;
200 };
201
202 event-nvme3-presence {
203 label = "nvme3-presence";
204 gpios = <&pca4 3 GPIO_ACTIVE_LOW>;
205 linux,code = <3>;
206 };
207 };
208
209 iio-hwmon {
210 compatible = "iio-hwmon";
211 io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>,
212 <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
213 <&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>,
214 <&adc1 4>, <&adc0 2>, <&adc1 0>,
215 <&p2v5_aux_vd 0>, <&adc1 7>;
216 };
217
218 p12v_vd: voltage-divider1 {
219 compatible = "voltage-divider";
220 io-channels = <&adc1 3>;
221 #io-channel-cells = <1>;
222
223 /*
224 * Scale the system voltage by 1127/127 to fit the ADC range.
225 * Use small nominator to prevent integer overflow.
226 */
227 output-ohms = <15>;
228 full-ohms = <133>;
229 };
230
231 p5v_aux_vd: voltage-divider2 {
232 compatible = "voltage-divider";
233 io-channels = <&adc1 5>;
234 #io-channel-cells = <1>;
235
236 /*
237 * Scale the system voltage by 1365/365 to fit the ADC range.
238 * Use small nominator to prevent integer overflow.
239 */
240 output-ohms = <50>;
241 full-ohms = <187>;
242 };
243
244 p5v_bmc_aux_vd: voltage-divider3 {
245 compatible = "voltage-divider";
246 io-channels = <&adc0 3>;
247 #io-channel-cells = <1>;
248
249 /*
250 * Scale the system voltage by 1365/365 to fit the ADC range.
251 * Use small nominator to prevent integer overflow.
252 */
253 output-ohms = <50>;
254 full-ohms = <187>;
255 };
256
257 p3v3_aux_vd: voltage-divider4 {
258 compatible = "voltage-divider";
259 io-channels = <&adc1 2>;
260 #io-channel-cells = <1>;
261
262 /*
263 * Scale the system voltage by 1698/698 to fit the ADC range.
264 * Use small nominator to prevent integer overflow.
265 */
266 output-ohms = <14>;
267 full-ohms = <34>;
268 };
269
270 p3v3_bmc_aux_vd: voltage-divider5 {
271 compatible = "voltage-divider";
272 io-channels = <&adc0 7>;
273 #io-channel-cells = <1>;
274
275 /*
276 * Scale the system voltage by 1698/698 to fit the ADC range.
277 * Use small nominator to prevent integer overflow.
278 */
279 output-ohms = <14>;
280 full-ohms = <34>;
281 };
282
283 p1v8_bmc_aux_vd: voltage-divider6 {
284 compatible = "voltage-divider";
285 io-channels = <&adc0 6>;
286 #io-channel-cells = <1>;
287
288 /*
289 * Scale the system voltage by 4000/3000 to fit the ADC range.
290 * Use small nominator to prevent integer overflow.
291 */
292 output-ohms = <3>;
293 full-ohms = <4>;
294 };
295
296 p2v5_aux_vd: voltage-divider7 {
297 compatible = "voltage-divider";
298 io-channels = <&adc1 1>;
299 #io-channel-cells = <1>;
300
301 /*
302 * Scale the system voltage by 2100/1100 to fit the ADC range.
303 * Use small nominator to prevent integer overflow.
304 */
305 output-ohms = <11>;
306 full-ohms = <21>;
307 };
308
309 p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
310 compatible = "regulator-fixed";
311 regulator-name = "p1v8_bmc_aux";
312 regulator-min-microvolt = <1800000>;
313 regulator-max-microvolt = <1800000>;
314 regulator-always-on;
315 };
316 };
317
318 &adc0 {
319 status = "okay";
320 vref-supply = <&p1v8_bmc_aux>;
321
322 pinctrl-names = "default";
323 pinctrl-0 = <&pinctrl_adc0_default
324 &pinctrl_adc1_default
325 &pinctrl_adc2_default
326 &pinctrl_adc3_default
327 &pinctrl_adc4_default
328 &pinctrl_adc5_default
329 &pinctrl_adc6_default
330 &pinctrl_adc7_default>;
331 };
332
333 &adc1 {
334 status = "okay";
335 vref-supply = <&p1v8_bmc_aux>;
336 aspeed,battery-sensing;
337
338 aspeed,int-vref-microvolt = <2500000>;
339 pinctrl-names = "default";
340 pinctrl-0 = <&pinctrl_adc8_default
341 &pinctrl_adc9_default
342 &pinctrl_adc10_default
343 &pinctrl_adc11_default
344 &pinctrl_adc12_default
345 &pinctrl_adc13_default
346 &pinctrl_adc14_default
347 &pinctrl_adc15_default>;
348 };
349
350 &ehci1 {
351 status = "okay";
352 };
353
354 &uhci {
355 status = "okay";
356 };
357
358 &pinctrl {
359 pinctrl_gpiol4_unbiased: gpiol4 {
360 pins = "C15";
361 bias-disable;
362 };
363
364 pinctrl_gpiol5_unbiased: gpiol5 {
365 pins = "F15";
366 bias-disable;
367 };
368
369 pinctrl_gpiol6_unbiased: gpiol6 {
370 pins = "B14";
371 bias-disable;
372 };
373
374 pinctrl_gpiol7_unbiased: gpiol7 {
375 pins = "C14";
376 bias-disable;
377 };
378 };
379
380 &gpio0 {
381 pinctrl-names = "default";
382 pinctrl-0 = <&pinctrl_gpiol4_unbiased
383 &pinctrl_gpiol5_unbiased
384 &pinctrl_gpiol6_unbiased
385 &pinctrl_gpiol7_unbiased>;
386
387 gpio-line-names =
388 /*A0-A7*/ "","","","","","","","",
389 /*B0-B7*/ "","","","","bmc-tpm-reset","","","",
390 /*C0-C7*/ "","","","","","","","",
391 /*D0-D7*/ "","","","","","","","",
392 /*E0-E7*/ "","","","","","","","",
393 /*F0-F7*/ "","","","","","","","",
394 /*G0-G7*/ "","","","","","","","",
395 /*H0-H7*/ "","","","","","","","",
396 /*I0-I7*/ "","","","","","","","",
397 /*J0-J7*/ "","","","","","","","",
398 /*K0-K7*/ "","","","","","","","",
399 /*L0-L7*/ "","","","","","","","led-bmc-ready",
400 /*M0-M7*/ "","","","","","","","",
401 /*N0-N7*/ "pch-reset","","","","","flash-write-override","","",
402 /*O0-O7*/ "","","","","","","","",
403 /*P0-P7*/ "","","","","","","","led-bmc-hb",
404 /*Q0-Q7*/ "","","","","","","pch-ready","",
405 /*R0-R7*/ "","","","","","","","",
406 /*S0-S7*/ "","","","","","","led-rear-enc-fault0","led-rear-enc-id0",
407 /*T0-T7*/ "","","","","","","","",
408 /*U0-U7*/ "","","","","","","","",
409 /*V0-V7*/ "","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
410 /*W0-W7*/ "","","","","","","","",
411 /*X0-X7*/ "fpga-pgood","power-chassis-good","pch-pgood","","","","","",
412 /*Y0-Y7*/ "","","","","","","","",
413 /*Z0-Z7*/ "","","","","","","","";
414
415 pin-gpio-hog-0 {
416 gpio-hog;
417 gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
418 input;
419 line-name = "RST_RTCRST_N";
420 };
421
422 pin-gpio-hog-1 {
423 gpio-hog;
424 gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
425 input;
426 line-name = "RST_SRTCRST_N";
427 };
428
429 pin-gpio-hog-2 {
430 gpio-hog;
431 gpios = <ASPEED_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
432 output-high;
433 line-name = "BMC_FAN_E3_SVC_PEX_INT_N";
434 };
435
436 pin-gpio-hog-3 {
437 gpio-hog;
438 gpios = <ASPEED_GPIO(O, 6) GPIO_ACTIVE_LOW>;
439 output-low;
440 line-name = "isolate_errs_cpu1";
441 };
442 };
443
444 &emmc_controller {
445 status = "okay";
446 };
447
448 &pinctrl_emmc_default {
449 bias-disable;
450 };
451
452 &emmc {
453 status = "okay";
454 clk-phase-mmc-hs200 = <180>, <180>;
455 };
456
457 &sgpiom0 {
458 status = "okay";
459 ngpios = <128>;
460 bus-frequency = <500000>;
461 };
462
463 &ibt {
464 status = "okay";
465 };
466
467 &uart2 {
468 status = "okay";
469 };
470
471 &vuart1 {
472 status = "okay";
473 };
474
475 &vuart2 {
476 status = "okay";
477 };
478
479 &lpc_ctrl {
480 status = "okay";
481 memory-region = <&flash_memory>;
482 };
483
484 &mac2 {
485 status = "okay";
486 pinctrl-names = "default";
487 pinctrl-0 = <&pinctrl_rmii3_default>;
488 clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
489 <&syscon ASPEED_CLK_MAC3RCLK>;
490 clock-names = "MACCLK", "RCLK";
491 use-ncsi;
492 };
493
494 &mac3 {
495 status = "okay";
496 pinctrl-names = "default";
497 pinctrl-0 = <&pinctrl_rmii4_default>;
498 clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
499 <&syscon ASPEED_CLK_MAC4RCLK>;
500 clock-names = "MACCLK", "RCLK";
501 use-ncsi;
502 };
503
504 &wdt1 {
505 aspeed,reset-type = "none";
506 aspeed,external-signal;
507 aspeed,ext-push-pull;
508 aspeed,ext-active-high;
509
510 pinctrl-names = "default";
511 pinctrl-0 = <&pinctrl_wdtrst1_default>;
512 };
513
514 &wdt2 {
515 status = "okay";
516 };
517
518 &kcs2 {
519 status = "okay";
520 aspeed,lpc-io-reg = <0xca8 0xcac>;
521 };
522
523 &kcs3 {
524 status = "okay";
525 aspeed,lpc-io-reg = <0xca2>;
526 aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
527 };
528
529 &peci0 {
530 status = "okay";
531 };
532
533 &lpc_snoop {
534 status = "okay";
535 snoop-ports = <0x80>, <0x81>;
536 };
537
538 &i2c0 {
539 status = "okay";
540
541 eeprom@50 {
542 compatible = "atmel,24c64";
543 reg = <0x50>;
544 };
545 };
546
547 &i2c1 {
548 status = "okay";
549
550 regulator@42 {
551 compatible = "infineon,ir38263";
552 reg = <0x42>;
553 };
554
555 led-controller@60 {
556 compatible = "nxp,pca9552";
557 reg = <0x60>;
558 #address-cells = <1>;
559 #size-cells = <0>;
560
561 gpio-controller;
562 #gpio-cells = <2>;
563
564 led@0 {
565 label = "nic1-perst";
566 reg = <0>;
567 retain-state-shutdown;
568 default-state = "keep";
569 type = <PCA955X_TYPE_LED>;
570 };
571
572 led@1 {
573 label = "bmc-perst";
574 reg = <1>;
575 retain-state-shutdown;
576 default-state = "keep";
577 type = <PCA955X_TYPE_LED>;
578 };
579
580 led@2 {
581 label = "reset-M2-SSD1-2-perst";
582 reg = <2>;
583 retain-state-shutdown;
584 default-state = "keep";
585 type = <PCA955X_TYPE_LED>;
586 };
587
588 led@3 {
589 label = "pcie-perst1";
590 reg = <3>;
591 retain-state-shutdown;
592 default-state = "keep";
593 type = <PCA955X_TYPE_LED>;
594 };
595
596 led@4 {
597 label = "pcie-perst2";
598 reg = <4>;
599 retain-state-shutdown;
600 default-state = "keep";
601 type = <PCA955X_TYPE_LED>;
602 };
603
604 led@5 {
605 label = "pcie-perst3";
606 reg = <5>;
607 retain-state-shutdown;
608 default-state = "keep";
609 type = <PCA955X_TYPE_LED>;
610 };
611
612 led@6 {
613 label = "pcie-perst4";
614 reg = <6>;
615 retain-state-shutdown;
616 default-state = "keep";
617 type = <PCA955X_TYPE_LED>;
618 };
619
620 led@7 {
621 label = "pcie-perst5";
622 reg = <7>;
623 retain-state-shutdown;
624 default-state = "keep";
625 type = <PCA955X_TYPE_LED>;
626 };
627
628 led@8 {
629 label = "pcie-perst6";
630 reg = <8>;
631 retain-state-shutdown;
632 default-state = "keep";
633 type = <PCA955X_TYPE_LED>;
634 };
635
636 led@9 {
637 label = "pcie-perst7";
638 reg = <9>;
639 retain-state-shutdown;
640 default-state = "keep";
641 type = <PCA955X_TYPE_LED>;
642 };
643
644 led@10 {
645 label = "pcie-perst8";
646 reg = <10>;
647 retain-state-shutdown;
648 default-state = "keep";
649 type = <PCA955X_TYPE_LED>;
650 };
651
652 led@11 {
653 label = "PV-cp0-sw1stk4-perst";
654 reg = <11>;
655 retain-state-shutdown;
656 default-state = "keep";
657 type = <PCA955X_TYPE_LED>;
658 };
659
660 led@12 {
661 label = "PV-cp0-sw1stk5-perst";
662 reg = <12>;
663 retain-state-shutdown;
664 default-state = "keep";
665 type = <PCA955X_TYPE_LED>;
666 };
667
668 led@13 {
669 label = "pe-cp-drv0-perst";
670 reg = <13>;
671 retain-state-shutdown;
672 default-state = "keep";
673 type = <PCA955X_TYPE_LED>;
674 };
675
676 led@14 {
677 label = "pe-cp-drv1-perst";
678 reg = <14>;
679 retain-state-shutdown;
680 default-state = "keep";
681 type = <PCA955X_TYPE_LED>;
682 };
683
684 led@15 {
685 label = "lom-perst";
686 reg = <15>;
687 retain-state-shutdown;
688 default-state = "keep";
689 type = <PCA955X_TYPE_LED>;
690 };
691 };
692
693 gpio@74 {
694 compatible = "nxp,pca9539";
695 reg = <0x74>;
696
697 gpio-controller;
698 #gpio-cells = <2>;
699
700 gpio-line-names =
701 "PLUG_DETECT_PCIE_J101_N",
702 "PLUG_DETECT_PCIE_J102_N",
703 "PLUG_DETECT_PCIE_J103_N",
704 "PLUG_DETECT_PCIE_J104_N",
705 "PLUG_DETECT_PCIE_J105_N",
706 "PLUG_DETECT_PCIE_J106_N",
707 "PLUG_DETECT_PCIE_J107_N",
708 "PLUG_DETECT_PCIE_J108_N",
709 "PLUG_DETECT_M2_SSD1_N",
710 "PLUG_DETECT_NIC1_N",
711 "SEL_SMB_DIMM_CPU0",
712 "presence-ps2",
713 "presence-ps3",
714 "", "",
715 "PWRBRD_PLUG_DETECT2_N";
716 };
717 };
718
719 &i2c2 {
720 status = "okay";
721
722 power-supply@58 {
723 compatible = "intel,crps185";
724 reg = <0x58>;
725 };
726
727 power-supply@59 {
728 compatible = "intel,crps185";
729 reg = <0x59>;
730 };
731
732 power-supply@5a {
733 compatible = "intel,crps185";
734 reg = <0x5a>;
735 };
736
737 power-supply@5b {
738 compatible = "intel,crps185";
739 reg = <0x5b>;
740 };
741 };
742
743 &i2c3 {
744 status = "okay";
745
746 i2c-mux@70 {
747 compatible = "nxp,pca9548";
748 reg = <0x70>;
749 #address-cells = <1>;
750 #size-cells = <0>;
751 i2c-mux-idle-disconnect;
752
753 i2c3mux0chn0: i2c@0 {
754 #address-cells = <1>;
755 #size-cells = <0>;
756 reg = <0>;
757 };
758
759 i2c3mux0chn1: i2c@1 {
760 #address-cells = <1>;
761 #size-cells = <0>;
762 reg = <1>;
763 };
764
765 i2c3mux0chn2: i2c@2 {
766 #address-cells = <1>;
767 #size-cells = <0>;
768 reg = <2>;
769 };
770
771 i2c3mux0chn3: i2c@3 {
772 #address-cells = <1>;
773 #size-cells = <0>;
774 reg = <3>;
775 };
776
777 i2c3mux0chn4: i2c@4 {
778 #address-cells = <1>;
779 #size-cells = <0>;
780 reg = <4>;
781 };
782
783 i2c3mux0chn5: i2c@5 {
784 #address-cells = <1>;
785 #size-cells = <0>;
786 reg = <5>;
787 };
788
789 i2c3mux0chn6: i2c@6 {
790 #address-cells = <1>;
791 #size-cells = <0>;
792 reg = <6>;
793 };
794
795 i2c3mux0chn7: i2c@7 {
796 #address-cells = <1>;
797 #size-cells = <0>;
798 reg = <7>;
799 };
800 };
801 };
802
803 &i2c4 {
804 status = "okay";
805 multi-master;
806 bus-frequency = <1000000>;
807
808 ipmb@10 {
809 compatible = "ipmb-dev";
810 reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
811
812 i2c-protocol;
813 };
814 };
815
816 &i2c5 {
817 status = "okay";
818
819 regulator@42 {
820 compatible = "infineon,ir38263";
821 reg = <0x42>;
822 };
823
824 regulator@43 {
825 compatible = "infineon,ir38060";
826 reg = <0x43>;
827 };
828 };
829
830 &i2c6 {
831 status = "okay";
832
833 fan-controller@52 {
834 compatible = "maxim,max31785a";
835 reg = <0x52>;
836 };
837
838 fan-controller@54 {
839 compatible = "maxim,max31785a";
840 reg = <0x54>;
841 };
842
843 eeprom@55 {
844 compatible = "atmel,24c64";
845 reg = <0x55>;
846 };
847
848 i2c-mux@70 {
849 compatible = "nxp,pca9548";
850 reg = <0x70>;
851 #address-cells = <1>;
852 #size-cells = <0>;
853 i2c-mux-idle-disconnect;
854
855 i2c6mux0chn0: i2c@0 {
856 #address-cells = <1>;
857 #size-cells = <0>;
858 reg = <0>;
859 };
860
861 i2c6mux0chn1: i2c@1 {
862 #address-cells = <1>;
863 #size-cells = <0>;
864 reg = <1>;
865 };
866
867 i2c6mux0chn2: i2c@2 {
868 #address-cells = <1>;
869 #size-cells = <0>;
870 reg = <2>;
871 };
872
873 i2c6mux0chn3: i2c@3 {
874 #address-cells = <1>;
875 #size-cells = <0>;
876 reg = <3>;
877 };
878
879 i2c6mux0chn4: i2c@4 {
880 #address-cells = <1>;
881 #size-cells = <0>;
882 reg = <4>;
883
884 humidity-sensor@40 {
885 compatible = "ti,hdc1080";
886 reg = <0x40>;
887 };
888
889 temperature-sensor@48 {
890 compatible = "ti,tmp275";
891 reg = <0x48>;
892 };
893
894 eeprom@50 {
895 compatible = "atmel,24c32";
896 reg = <0x50>;
897 };
898
899 led-controller@60 {
900 compatible = "nxp,pca9551";
901 reg = <0x60>;
902 #address-cells = <1>;
903 #size-cells = <0>;
904
905 gpio-controller;
906 #gpio-cells = <2>;
907
908 led@0 {
909 label = "enclosure-id-led";
910 reg = <0>;
911 retain-state-shutdown;
912 default-state = "keep";
913 type = <PCA955X_TYPE_LED>;
914 };
915
916 led@1 {
917 label = "attention-led";
918 reg = <1>;
919 retain-state-shutdown;
920 default-state = "keep";
921 type = <PCA955X_TYPE_LED>;
922 };
923
924 led@2 {
925 label = "enclosure-fault-rollup-led";
926 reg = <2>;
927 retain-state-shutdown;
928 default-state = "keep";
929 type = <PCA955X_TYPE_LED>;
930 };
931
932 led@3 {
933 label = "power-on-led";
934 reg = <3>;
935 retain-state-shutdown;
936 default-state = "keep";
937 type = <PCA955X_TYPE_LED>;
938 };
939 };
940
941 temperature-sensor@76 {
942 compatible = "infineon,dps310";
943 reg = <0x76>;
944 };
945 };
946
947 i2c6mux0chn5: i2c@5 {
948 #address-cells = <1>;
949 #size-cells = <0>;
950 reg = <5>;
951 };
952
953 i2c6mux0chn6: i2c@6 {
954 #address-cells = <1>;
955 #size-cells = <0>;
956 reg = <6>;
957 };
958
959 i2c6mux0chn7: i2c@7 {
960 #address-cells = <1>;
961 #size-cells = <0>;
962 reg = <7>;
963 };
964 };
965
966 pca3: gpio@74 {
967 compatible = "nxp,pca9539";
968 reg = <0x74>;
969
970 gpio-controller;
971 #gpio-cells = <2>;
972 };
973
974 pca4: gpio@77 {
975 compatible = "nxp,pca9539";
976 reg = <0x77>;
977
978 gpio-controller;
979 #gpio-cells = <2>;
980
981 gpio-line-names =
982 "PE_NVMED0_EXP_PRSNT_N",
983 "PE_NVMED1_EXP_PRSNT_N",
984 "PE_NVMED2_EXP_PRSNT_N",
985 "PE_NVMED3_EXP_PRSNT_N",
986 "LED_FAULT_NVMED0",
987 "LED_FAULT_NVMED1",
988 "LED_FAULT_NVMED2",
989 "LED_FAULT_NVMED3",
990 "FAN0_PRESENCE_R_N",
991 "FAN1_PRESENCE_R_N",
992 "FAN2_PRESENCE_R_N",
993 "FAN3_PRESENCE_R_N",
994 "FAN4_PRESENCE_R_N",
995 "FAN5_PRESENCE_N",
996 "FAN6_PRESENCE_N",
997 "";
998 };
999 };
1000
1001 &i2c7 {
1002 status = "okay";
1003
1004 i2c-mux@70 {
1005 compatible = "nxp,pca9548";
1006 reg = <0x70>;
1007 #address-cells = <1>;
1008 #size-cells = <0>;
1009 i2c-mux-idle-disconnect;
1010
1011 i2c7mux0chn0: i2c@0 {
1012 #address-cells = <1>;
1013 #size-cells = <0>;
1014 reg = <0>;
1015 };
1016
1017 i2c7mux0chn1: i2c@1 {
1018 #address-cells = <1>;
1019 #size-cells = <0>;
1020 reg = <1>;
1021 };
1022
1023 i2c7mux0chn2: i2c@2 {
1024 #address-cells = <1>;
1025 #size-cells = <0>;
1026 reg = <2>;
1027 };
1028
1029 i2c7mux0chn3: i2c@3 {
1030 #address-cells = <1>;
1031 #size-cells = <0>;
1032 reg = <3>;
1033
1034 regulator@58 {
1035 compatible = "mps,mp2973";
1036 reg = <0x58>;
1037 };
1038 };
1039
1040 i2c7mux0chn4: i2c@4 {
1041 #address-cells = <1>;
1042 #size-cells = <0>;
1043 reg = <4>;
1044 };
1045
1046 i2c7mux0chn5: i2c@5 {
1047 #address-cells = <1>;
1048 #size-cells = <0>;
1049 reg = <5>;
1050
1051 regulator@40 {
1052 compatible = "infineon,tda38640";
1053 reg = <0x40>;
1054 };
1055 };
1056
1057 i2c7mux0chn6: i2c@6 {
1058 #address-cells = <1>;
1059 #size-cells = <0>;
1060 reg = <6>;
1061 };
1062
1063 i2c7mux0chn7: i2c@7 {
1064 #address-cells = <1>;
1065 #size-cells = <0>;
1066 reg = <7>;
1067 };
1068 };
1069 };
1070
1071 &i2c8 {
1072 status = "okay";
1073 bus-frequency = <400000>;
1074
1075 i2c-mux@71 {
1076 compatible = "nxp,pca9548";
1077 reg = <0x71>;
1078 #address-cells = <1>;
1079 #size-cells = <0>;
1080 i2c-mux-idle-disconnect;
1081
1082 i2c8mux0chn0: i2c@0 {
1083 #address-cells = <1>;
1084 #size-cells = <0>;
1085 reg = <0>;
1086
1087 regulator@58 {
1088 compatible = "mps,mp2971";
1089 reg = <0x58>;
1090 };
1091 };
1092
1093 i2c8mux0chn1: i2c@1 {
1094 #address-cells = <1>;
1095 #size-cells = <0>;
1096 reg = <1>;
1097
1098 regulator@40 {
1099 compatible = "infineon,tda38640";
1100 reg = <0x40>;
1101 };
1102
1103 regulator@41 {
1104 compatible = "infineon,tda38640";
1105 reg = <0x41>;
1106 };
1107
1108 regulator@58 {
1109 compatible = "mps,mp2971";
1110 reg = <0x58>;
1111 };
1112
1113 regulator@5b {
1114 compatible = "mps,mp2971";
1115 reg = <0x5b>;
1116 };
1117 };
1118
1119 i2c8mux0chn2: i2c@2 {
1120 #address-cells = <1>;
1121 #size-cells = <0>;
1122 reg = <2>;
1123 };
1124
1125 i2c8mux0chn3: i2c@3 {
1126 #address-cells = <1>;
1127 #size-cells = <0>;
1128 reg = <3>;
1129 };
1130
1131 i2c8mux0chn4: i2c@4 {
1132 #address-cells = <1>;
1133 #size-cells = <0>;
1134 reg = <4>;
1135
1136 i2c-mux@70 {
1137 compatible = "nxp,pca9548";
1138 reg = <0x70>;
1139 #address-cells = <1>;
1140 #size-cells = <0>;
1141 i2c-mux-idle-disconnect;
1142
1143 i2c8mux1chn0: i2c@0 {
1144 #address-cells = <1>;
1145 #size-cells = <0>;
1146 reg = <0>;
1147 };
1148
1149 i2c8mux1chn1: i2c@1 {
1150 #address-cells = <1>;
1151 #size-cells = <0>;
1152 reg = <1>;
1153 };
1154
1155 i2c8mux1chn2: i2c@2 {
1156 #address-cells = <1>;
1157 #size-cells = <0>;
1158 reg = <2>;
1159 };
1160
1161 i2c8mux1chn3: i2c@3 {
1162 #address-cells = <1>;
1163 #size-cells = <0>;
1164 reg = <3>;
1165 };
1166
1167 i2c8mux1chn4: i2c@4 {
1168 #address-cells = <1>;
1169 #size-cells = <0>;
1170 reg = <4>;
1171 };
1172
1173 i2c8mux1chn5: i2c@5 {
1174 #address-cells = <1>;
1175 #size-cells = <0>;
1176 reg = <5>;
1177 };
1178
1179 i2c8mux1chn6: i2c@6 {
1180 #address-cells = <1>;
1181 #size-cells = <0>;
1182 reg = <6>;
1183 };
1184
1185 i2c8mux1chn7: i2c@7 {
1186 #address-cells = <1>;
1187 #size-cells = <0>;
1188 reg = <7>;
1189 };
1190 };
1191 };
1192
1193 i2c8mux0chn5: i2c@5 {
1194 #address-cells = <1>;
1195 #size-cells = <0>;
1196 reg = <5>;
1197 };
1198
1199 i2c8mux0chn6: i2c@6 {
1200 #address-cells = <1>;
1201 #size-cells = <0>;
1202 reg = <6>;
1203
1204 temperature-sensor@4c {
1205 compatible = "ti,tmp432";
1206 reg = <0x4c>;
1207 };
1208 };
1209
1210 i2c8mux0chn7: i2c@7 {
1211 #address-cells = <1>;
1212 #size-cells = <0>;
1213 reg = <7>;
1214
1215 regulator@40 {
1216 compatible = "infineon,ir38060";
1217 reg = <0x40>;
1218 };
1219 };
1220 };
1221 };
1222
1223 &i2c9 {
1224 status = "okay";
1225
1226 regulator@40 {
1227 compatible = "infineon,ir38263";
1228 reg = <0x40>;
1229 };
1230
1231 regulator@41 {
1232 compatible = "infineon,ir38263";
1233 reg = <0x41>;
1234 };
1235
1236 eeprom@50 {
1237 compatible = "atmel,24c64";
1238 reg = <0x50>;
1239 };
1240 };
1241
1242 &i2c11 {
1243 status = "okay";
1244
1245 tpm@2e {
1246 compatible = "tcg,tpm-tis-i2c";
1247 reg = <0x2e>;
1248 memory-region = <&eventlog>;
1249 };
1250 };
1251
1252 &i2c12 {
1253 status = "okay";
1254 };
1255
1256 &i2c13 {
1257 status = "okay";
1258
1259 regulator@41 {
1260 compatible = "infineon,ir38263";
1261 reg = <0x41>;
1262 };
1263
1264 led-controller@61 {
1265 compatible = "nxp,pca9552";
1266 reg = <0x61>;
1267 #address-cells = <1>;
1268 #size-cells = <0>;
1269
1270 gpio-controller;
1271 #gpio-cells = <2>;
1272
1273 led@0 {
1274 label = "efuse-12v-slots";
1275 reg = <0>;
1276 retain-state-shutdown;
1277 default-state = "keep";
1278 type = <PCA955X_TYPE_LED>;
1279 };
1280
1281 led@1 {
1282 label = "efuse-3p3v-slot";
1283 reg = <1>;
1284 retain-state-shutdown;
1285 default-state = "keep";
1286 type = <PCA955X_TYPE_LED>;
1287 };
1288
1289 led@3 {
1290 label = "nic2-pert";
1291 reg = <3>;
1292 retain-state-shutdown;
1293 default-state = "keep";
1294 type = <PCA955X_TYPE_LED>;
1295 };
1296
1297 led@4 {
1298 label = "pcie-perst9";
1299 reg = <4>;
1300 retain-state-shutdown;
1301 default-state = "keep";
1302 type = <PCA955X_TYPE_LED>;
1303 };
1304
1305 led@5 {
1306 label = "pcie-perst10";
1307 reg = <5>;
1308 retain-state-shutdown;
1309 default-state = "keep";
1310 type = <PCA955X_TYPE_LED>;
1311 };
1312
1313 led@6 {
1314 label = "pcie-perst11";
1315 reg = <6>;
1316 retain-state-shutdown;
1317 default-state = "keep";
1318 type = <PCA955X_TYPE_LED>;
1319 };
1320
1321 led@7 {
1322 label = "pcie-perst12";
1323 reg = <7>;
1324 retain-state-shutdown;
1325 default-state = "keep";
1326 type = <PCA955X_TYPE_LED>;
1327 };
1328
1329 led@8 {
1330 label = "pcie-perst13";
1331 reg = <8>;
1332 retain-state-shutdown;
1333 default-state = "keep";
1334 type = <PCA955X_TYPE_LED>;
1335 };
1336
1337 led@9 {
1338 label = "pcie-perst14";
1339 reg = <9>;
1340 retain-state-shutdown;
1341 default-state = "keep";
1342 type = <PCA955X_TYPE_LED>;
1343 };
1344
1345 led@10 {
1346 label = "pcie-perst15";
1347 reg = <10>;
1348 retain-state-shutdown;
1349 default-state = "keep";
1350 type = <PCA955X_TYPE_LED>;
1351 };
1352
1353 led@11 {
1354 label = "pcie-perst16";
1355 reg = <11>;
1356 retain-state-shutdown;
1357 default-state = "keep";
1358 type = <PCA955X_TYPE_LED>;
1359 };
1360
1361 led@12 {
1362 label = "PV-cp1-sw1stk4-perst";
1363 reg = <12>;
1364 retain-state-shutdown;
1365 default-state = "keep";
1366 type = <PCA955X_TYPE_LED>;
1367 };
1368
1369 led@13 {
1370 label = "PV-cp1-sw1stk5-perst";
1371 reg = <13>;
1372 retain-state-shutdown;
1373 default-state = "keep";
1374 type = <PCA955X_TYPE_LED>;
1375 };
1376
1377 led@14 {
1378 label = "pe-cp-drv2-perst";
1379 reg = <14>;
1380 retain-state-shutdown;
1381 default-state = "keep";
1382 type = <PCA955X_TYPE_LED>;
1383 };
1384
1385 led@15 {
1386 label = "pe-cp-drv3-perst";
1387 reg = <15>;
1388 retain-state-shutdown;
1389 default-state = "keep";
1390 type = <PCA955X_TYPE_LED>;
1391 };
1392 };
1393
1394 gpio@75 {
1395 compatible = "nxp,pca9539";
1396 reg = <0x75>;
1397
1398 gpio-controller;
1399 #gpio-cells = <2>;
1400
1401 gpio-line-names =
1402 "PLUG_DETECT_PCIE_J109_N",
1403 "PLUG_DETECT_PCIE_J110_N",
1404 "PLUG_DETECT_PCIE_J111_N",
1405 "PLUG_DETECT_PCIE_J112_N",
1406 "PLUG_DETECT_PCIE_J113_N",
1407 "PLUG_DETECT_PCIE_J114_N",
1408 "PLUG_DETECT_PCIE_J115_N",
1409 "PLUG_DETECT_PCIE_J116_N",
1410 "PLUG_DETECT_M2_SSD2_N",
1411 "PLUG_DETECT_NIC2_N",
1412 "SEL_SMB_DIMM_CPU1",
1413 "presence-ps0",
1414 "presence-ps1",
1415 "", "",
1416 "PWRBRD_PLUG_DETECT1_N";
1417 };
1418
1419 gpio@76 {
1420 compatible = "nxp,pca9539";
1421 reg = <0x76>;
1422
1423 gpio-controller;
1424 #gpio-cells = <2>;
1425
1426 gpio-line-names =
1427 "SW1_BOOTRCVRYB1_N",
1428 "SW1_BOOTRCVRYB0_N",
1429 "SW2_BOOTRCVRYB1_N",
1430 "SW2_BOOTRCVRYB0_N",
1431 "SW3_4_BOOTRCVRYB1_N",
1432 "SW3_4_BOOTRCVRYB0_N",
1433 "SW5_BOOTRCVRYB1_N",
1434 "SW5_BOOTRCVRYB0_N",
1435 "SW6_BOOTRCVRYB1_N",
1436 "SW6_BOOTRCVRYB0_N",
1437 "SW1_RESET_N",
1438 "SW3_RESET_N",
1439 "SW4_RESET_N",
1440 "SW2_RESET_N",
1441 "SW5_RESET_N",
1442 "SW6_RESET_N";
1443 };
1444 };
1445
1446 &i2c14 {
1447 status = "okay";
1448
1449 i2c-mux@70 {
1450 compatible = "nxp,pca9548";
1451 reg = <0x70>;
1452 #address-cells = <1>;
1453 #size-cells = <0>;
1454 i2c-mux-idle-disconnect;
1455
1456 i2c14mux0chn0: i2c@0 {
1457 #address-cells = <1>;
1458 #size-cells = <0>;
1459 reg = <0>;
1460 };
1461
1462 i2c14mux0chn1: i2c@1 {
1463 #address-cells = <1>;
1464 #size-cells = <0>;
1465 reg = <1>;
1466 };
1467
1468 i2c14mux0chn2: i2c@2 {
1469 #address-cells = <1>;
1470 #size-cells = <0>;
1471 reg = <2>;
1472 };
1473
1474 i2c14mux0chn3: i2c@3 {
1475 #address-cells = <1>;
1476 #size-cells = <0>;
1477 reg = <3>;
1478
1479 regulator@58 {
1480 compatible = "mps,mp2973";
1481 reg = <0x58>;
1482 };
1483 };
1484
1485 i2c14mux0chn4: i2c@4 {
1486 #address-cells = <1>;
1487 #size-cells = <0>;
1488 reg = <4>;
1489 };
1490
1491 i2c14mux0chn5: i2c@5 {
1492 #address-cells = <1>;
1493 #size-cells = <0>;
1494 reg = <5>;
1495
1496 regulator@40 {
1497 compatible = "infineon,tda38640";
1498 reg = <0x40>;
1499 };
1500 };
1501
1502 i2c14mux0chn6: i2c@6 {
1503 #address-cells = <1>;
1504 #size-cells = <0>;
1505 reg = <6>;
1506 };
1507
1508 i2c14mux0chn7: i2c@7 {
1509 #address-cells = <1>;
1510 #size-cells = <0>;
1511 reg = <7>;
1512 };
1513 };
1514 };
1515
1516 &i2c15 {
1517 status = "okay";
1518 bus-frequency = <400000>;
1519
1520 i2c-mux@71 {
1521 compatible = "nxp,pca9548";
1522 reg = <0x71>;
1523 #address-cells = <1>;
1524 #size-cells = <0>;
1525 i2c-mux-idle-disconnect;
1526
1527 i2c15mux0chn0: i2c@0 {
1528 #address-cells = <1>;
1529 #size-cells = <0>;
1530 reg = <0>;
1531
1532 regulator@58 {
1533 compatible = "mps,mp2971";
1534 reg = <0x58>;
1535 };
1536 };
1537
1538 i2c15mux0chn1: i2c@1 {
1539 #address-cells = <1>;
1540 #size-cells = <0>;
1541 reg = <1>;
1542
1543 regulator@40 {
1544 compatible = "infineon,tda38640";
1545 reg = <0x40>;
1546 };
1547
1548 regulator@41 {
1549 compatible = "infineon,tda38640";
1550 reg = <0x41>;
1551 };
1552
1553 regulator@58 {
1554 compatible = "mps,mp2971";
1555 reg = <0x58>;
1556 };
1557
1558 regulator@5b {
1559 compatible = "mps,mp2971";
1560 reg = <0x5b>;
1561 };
1562 };
1563
1564 i2c15mux0chn2: i2c@2 {
1565 #address-cells = <1>;
1566 #size-cells = <0>;
1567 reg = <2>;
1568 };
1569
1570 i2c15mux0chn3: i2c@3 {
1571 #address-cells = <1>;
1572 #size-cells = <0>;
1573 reg = <3>;
1574 };
1575
1576 i2c15mux0chn4: i2c@4 {
1577 #address-cells = <1>;
1578 #size-cells = <0>;
1579 reg = <4>;
1580
1581 i2c-mux@70 {
1582 compatible = "nxp,pca9548";
1583 reg = <0x70>;
1584 #address-cells = <1>;
1585 #size-cells = <0>;
1586 i2c-mux-idle-disconnect;
1587
1588 i2c15mux1chn0: i2c@0 {
1589 #address-cells = <1>;
1590 #size-cells = <0>;
1591 reg = <0>;
1592 };
1593
1594 i2c15mux1chn1: i2c@1 {
1595 #address-cells = <1>;
1596 #size-cells = <0>;
1597 reg = <1>;
1598 };
1599
1600 i2c15mux1chn2: i2c@2 {
1601 #address-cells = <1>;
1602 #size-cells = <0>;
1603 reg = <2>;
1604 };
1605
1606 i2c15mux1chn3: i2c@3 {
1607 #address-cells = <1>;
1608 #size-cells = <0>;
1609 reg = <3>;
1610 };
1611
1612 i2c15mux1chn4: i2c@4 {
1613 #address-cells = <1>;
1614 #size-cells = <0>;
1615 reg = <4>;
1616 };
1617
1618 i2c15mux1chn5: i2c@5 {
1619 #address-cells = <1>;
1620 #size-cells = <0>;
1621 reg = <5>;
1622 };
1623
1624 i2c15mux1chn6: i2c@6 {
1625 #address-cells = <1>;
1626 #size-cells = <0>;
1627 reg = <6>;
1628 };
1629
1630 i2c15mux1chn7: i2c@7 {
1631 #address-cells = <1>;
1632 #size-cells = <0>;
1633 reg = <7>;
1634 };
1635 };
1636 };
1637
1638 i2c15mux0chn5: i2c@5 {
1639 #address-cells = <1>;
1640 #size-cells = <0>;
1641 reg = <5>;
1642 };
1643
1644 i2c15mux0chn6: i2c@6 {
1645 #address-cells = <1>;
1646 #size-cells = <0>;
1647 reg = <6>;
1648
1649 temperature-sensor@4c {
1650 compatible = "ti,tmp432";
1651 reg = <0x4c>;
1652 };
1653 };
1654
1655 i2c15mux0chn7: i2c@7 {
1656 #address-cells = <1>;
1657 #size-cells = <0>;
1658 reg = <7>;
1659
1660 regulator@40 {
1661 compatible = "infineon,ir38060";
1662 reg = <0x40>;
1663 };
1664
1665 temperature-sensor@4c {
1666 compatible = "ti,tmp432";
1667 reg = <0x4c>;
1668 };
1669 };
1670 };
1671 };