Debian Codegraph @

arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts

raw
1 // SPDX-License-Identifier: GPL-2.0+
2 // Copyright (c) 2025 Facebook Inc.
3
4 /dts-v1/;
5 #include "aspeed-g6.dtsi"
6 #include <dt-bindings/gpio/aspeed-gpio.h>
7 #include <dt-bindings/i2c/i2c.h>
8
9 / {
10 model = "Facebook Yosemite 5 BMC";
11 compatible = "facebook,yosemite5-bmc", "aspeed,ast2600";
12
13 aliases {
14 i2c16 = &i2c5mux0ch0;
15 i2c17 = &i2c5mux0ch1;
16 i2c18 = &i2c5mux0ch2;
17 i2c19 = &i2c5mux0ch3;
18 i2c20 = &i2c5mux1ch0;
19 i2c21 = &i2c5mux1ch1;
20 i2c22 = &i2c5mux1ch2;
21 i2c23 = &i2c5mux1ch3;
22 i2c24 = &i2c6mux0ch0;
23 i2c25 = &i2c6mux0ch1;
24 i2c26 = &i2c6mux0ch2;
25 i2c27 = &i2c6mux0ch3;
26 i2c28 = &i2c8mux0ch0;
27 i2c29 = &i2c8mux0ch1;
28 i2c30 = &i2c8mux0ch2;
29 i2c31 = &i2c8mux0ch3;
30 i2c32 = &i2c30mux0ch0;
31 i2c33 = &i2c30mux0ch1;
32 i2c34 = &i2c30mux0ch2;
33 i2c35 = &i2c30mux0ch3;
34 serial0 = &uart1;
35 serial2 = &uart3;
36 serial3 = &uart4;
37 serial4 = &uart5;
38 };
39
40 chosen {
41 stdout-path = "serial4:57600n8";
42 };
43
44 iio-hwmon {
45 compatible = "iio-hwmon";
46 io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
47 <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
48 <&adc1 2>;
49 };
50
51 leds {
52 compatible = "gpio-leds";
53
54 led-0 {
55 label = "bmc_heartbeat_amber";
56 gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
57 linux,default-trigger = "heartbeat";
58 };
59
60 led-1 {
61 label = "fp_id_amber";
62 default-state = "off";
63 gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
64 };
65
66 led-2 {
67 label = "power_blue";
68 default-state = "off";
69 gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
70 };
71 };
72
73 memory@80000000 {
74 device_type = "memory";
75 reg = <0x80000000 0x80000000>;
76 };
77
78 spi_gpio: spi {
79 compatible = "spi-gpio";
80 #address-cells = <1>;
81 #size-cells = <0>;
82
83 sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
84 mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
85 miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
86 cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
87 num-chipselects = <1>;
88 status = "okay";
89
90 tpm@0 {
91 compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
92 spi-max-frequency = <33000000>;
93 reg = <0>;
94 };
95 };
96 };
97
98 &adc0 {
99 aspeed,int-vref-microvolt = <2500000>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&pinctrl_adc0_default
102 &pinctrl_adc1_default
103 &pinctrl_adc2_default
104 &pinctrl_adc3_default
105 &pinctrl_adc4_default
106 &pinctrl_adc5_default
107 &pinctrl_adc6_default
108 &pinctrl_adc7_default>;
109 status = "okay";
110 };
111
112 &adc1 {
113 aspeed,int-vref-microvolt = <2500000>;
114 pinctrl-names = "default";
115 pinctrl-0 = <&pinctrl_adc10_default>;
116 status = "okay";
117 };
118
119 &ehci0 {
120 status = "okay";
121 };
122
123 &ehci1 {
124 status = "okay";
125 };
126
127 &fmc {
128 status = "okay";
129
130 flash@0 {
131 status = "okay";
132 m25p,fast-read;
133 label = "bmc";
134 spi-max-frequency = <50000000>;
135 #include "openbmc-flash-layout-128.dtsi"
136 };
137
138 flash@1 {
139 status = "okay";
140 m25p,fast-read;
141 label = "alt-bmc";
142 spi-max-frequency = <50000000>;
143 };
144 };
145
146 &gpio0 {
147 gpio-line-names =
148 /*A0-A7*/ "","","","","","","","",
149 /*B0-B7*/ "BATTERY_DETECT","","BMC_I2C1_FPGA_ALERT","BMC_READY",
150 "IOEXP_INT_3V3","FM_ID_LED","","",
151 /*C0-C7*/ "","","","",
152 "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N","","BMC_I2C_SSIF_ALERT",
153 /*D0-D7*/ "","","","","","","","",
154 /*E0-E7*/ "","","","","","","","",
155 /*F0-F7*/ "","","","","","","","",
156 /*G0-G7*/ "FM_BMC_MUX1_SEL","","","",
157 "","","FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
158 /*H0-H7*/ "","","","","","","","",
159 /*I0-I7*/ "","","","","","FLASH_WP_STATUS","BMC_JTAG_MUX_SEL","",
160 /*J0-J7*/ "","","","","","","","",
161 /*K0-K7*/ "","","","","","","","",
162 /*L0-L7*/ "","","","","","","","",
163 /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP","SCM_HPM_STBY_RST_N",
164 "SCM_HPM_STBY_EN","STBY_POWER_PG_3V3","TH500_SHDN_OK","","",
165 /*N0-N7*/ "led-postcode-0","led-postcode-1","led-postcode-2",
166 "led-postcode-3","led-postcode-4","led-postcode-5",
167 "led-postcode-6","led-postcode-7",
168 /*O0-O7*/ "RUN_POWER_PG","PWR_BRAKE","CHASSIS_AC_LOSS","BSM_PRSNT_N",
169 "PSU_SMB_ALERT","FM_TPM_PRSNT_0_N","PSU_FW_UPDATING_N","",
170 /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT","ID_RST_BTN_BMC_N",
171 "RST_BMC_RSTBTN_OUT_N","BMC_PWR_LED","RUN_POWER_EN","SHDN_FORCE","",
172 /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_LV3_N","USB_OC0_REAR_N","UART_MUX_SEL",
173 "I2C_MUX_RESET","RSVD_NV_PLT_DETECT","SPI_TPM_INT",
174 "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT",
175 /*R0-R7*/ "THERM_BB_WARN","SPI_BMC_FPGA_INT","CPU_BOOT_DONE","PMBUS_GNT",
176 "CHASSIS_PWR_BRK","PCIE_WAKE","PDB_THERM_OVERT","SHDN_REQ",
177 /*S0-S7*/ "","","SYS_BMC_PWRBTN_N","FM_TPM_PRSNT_1_N",
178 "FM_BMC_DEBUG_SW_N","UID_LED_N","SYS_FAULT_LED_N","RUN_POWER_FAULT",
179 /*T0-T7*/ "","","","","","","","",
180 /*U0-U7*/ "FM_DBP_BMC_PRDY_N","","","","","","","",
181 /*V0-V7*/ "L2_RST_REQ_OUT","L0L1_RST_REQ_OUT","BMC_ID_BEEP_SEL",
182 "BMC_I2C0_FPGA_ALERT","SMB_BMC_TMP_ALERT","PWR_LED_N",
183 "SYS_RST_OUT","IRQ_TPM_SPI_N",
184 /*W0-W7*/ "","","","","","","IRQ_ESPI_LPC_SERIRQ_ALERT0_N","",
185 /*X0-X7*/ "","FM_DBP_CPU_PREQ_GF_N","","","","","","",
186 /*Y0-Y7*/ "","","FM_FLASH_LATCH_N","BMC_EMMC_RST_N","","","","",
187 /*Z0-Z7*/ "","","","","","","","";
188 };
189
190 &gpio1 {
191 gpio-line-names =
192 /*18A0-18A7*/ "","","","","","","","",
193 /*18B0-18B7*/ "","","","","FM_BOARD_BMC_REV_ID0",
194 "FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
195 /*18C0-18C7*/ "","","SPI_BMC_BIOS_ROM_IRQ0_N","","","","","",
196 /*18D0-18D7*/ "","","","","","","","",
197 /*18E0-18E3*/ "FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_N","","";
198 };
199
200 /* MB CPLD I2C */
201 &i2c0 {
202 status = "okay";
203 };
204
205 /* CPU I2C */
206 &i2c1 {
207 status = "okay";
208 };
209
210 /* MCIO 2A I2C */
211 &i2c2 {
212 status = "okay";
213 };
214
215 &i2c3 {
216 status = "okay";
217
218 /* Socket 0 SBRMI */
219 sbrmi@3c {
220 compatible = "amd,sbrmi";
221 reg = <0x3c>;
222 };
223
224 /* Socket 0 SBTSI */
225 sbtsi@4c {
226 compatible = "amd,sbtsi";
227 reg = <0x4c>;
228 };
229 };
230
231 &i2c4 {
232 multi-master;
233 mctp-controller;
234 status = "okay";
235
236 mctp@10 {
237 compatible = "mctp-i2c-controller";
238 reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
239 };
240
241 /* OCP NIC TEMP */
242 temperature-sensor@1f {
243 compatible = "ti,tmp421";
244 reg = <0x1f>;
245 };
246
247 /* OCP NIC FRU EEPROM */
248 eeprom@50 {
249 compatible = "atmel,24c64";
250 reg = <0x50>;
251 };
252 };
253
254 &i2c5 {
255 status = "okay";
256
257 /* I2C MUX for MCIO 1A */
258 i2c-mux@70 {
259 compatible = "nxp,pca9546";
260 reg = <0x70>;
261 #address-cells = <1>;
262 #size-cells = <0>;
263 i2c-mux-idle-disconnect;
264
265 i2c5mux0ch0: i2c@0 {
266 reg = <0>;
267 #address-cells = <1>;
268 #size-cells = <0>;
269 };
270
271 i2c5mux0ch1: i2c@1 {
272 reg = <1>;
273 #address-cells = <1>;
274 #size-cells = <0>;
275 };
276
277 i2c5mux0ch2: i2c@2 {
278 reg = <2>;
279 #address-cells = <1>;
280 #size-cells = <0>;
281 };
282
283 i2c5mux0ch3: i2c@3 {
284 reg = <3>;
285 #address-cells = <1>;
286 #size-cells = <0>;
287 };
288 };
289
290 /* I2C MUX for MCIO 0A */
291 i2c-mux@77 {
292 compatible = "nxp,pca9546";
293 reg = <0x77>;
294 #address-cells = <1>;
295 #size-cells = <0>;
296 i2c-mux-idle-disconnect;
297
298 i2c5mux1ch0: i2c@0 {
299 reg = <0>;
300 #address-cells = <1>;
301 #size-cells = <0>;
302 };
303
304 i2c5mux1ch1: i2c@1 {
305 reg = <1>;
306 #address-cells = <1>;
307 #size-cells = <0>;
308 };
309
310 i2c5mux1ch2: i2c@2 {
311 reg = <2>;
312 #address-cells = <1>;
313 #size-cells = <0>;
314 };
315
316 i2c5mux1ch3: i2c@3 {
317 reg = <3>;
318 #address-cells = <1>;
319 #size-cells = <0>;
320 };
321 };
322 };
323
324 &i2c6 {
325 status = "okay";
326
327 /* I2C MUX for PWRPIC #13 ~ #16 */
328 i2c-mux@77 {
329 compatible = "nxp,pca9546";
330 reg = <0x77>;
331 #address-cells = <1>;
332 #size-cells = <0>;
333 i2c-mux-idle-disconnect;
334
335 /* PWRPIC #13 */
336 i2c6mux0ch0: i2c@0 {
337 reg = <0>;
338 #address-cells = <1>;
339 #size-cells = <0>;
340 };
341
342 /* PWRPIC #14 */
343 i2c6mux0ch1: i2c@1 {
344 reg = <1>;
345 #address-cells = <1>;
346 #size-cells = <0>;
347 };
348
349 /* PWRPIC #16 */
350 i2c6mux0ch2: i2c@2 {
351 reg = <2>;
352 #address-cells = <1>;
353 #size-cells = <0>;
354 };
355
356 /* PWRPIC #15 */
357 i2c6mux0ch3: i2c@3 {
358 reg = <3>;
359 #address-cells = <1>;
360 #size-cells = <0>;
361 };
362 };
363 };
364
365 /* SCM CPLD I2C */
366 &i2c7 {
367 status = "okay";
368 };
369
370 &i2c8 {
371 status = "okay";
372
373 power-monitor@14 {
374 compatible = "infineon,xdp710";
375 reg = <0x14>;
376 };
377
378 adc@1d {
379 compatible = "ti,adc128d818";
380 reg = <0x1d>;
381 ti,mode = /bits/ 8 <1>;
382 };
383
384 power-sensor@40 {
385 compatible = "ti,ina238";
386 reg = <0x40>;
387 shunt-resistor = <1000>;
388 };
389
390 /* PADDLE BD IOEXP */
391 gpio-expander@41 {
392 compatible = "nxp,pca9536";
393 reg = <0x41>;
394 gpio-controller;
395 #gpio-cells = <2>;
396 gpio-line-names =
397 "HSC_OC_GPIO0", "HSC_OC_GPIO1",
398 "HSC_OC_GPIO2", "HSC_OC_GPIO3";
399 };
400
401 power-sensor@42 {
402 compatible = "ti,ina238";
403 reg = <0x42>;
404 shunt-resistor = <1000>;
405 };
406
407 power-monitor@43 {
408 compatible = "lltc,ltc4287";
409 reg = <0x43>;
410 shunt-resistor-micro-ohms = <250>;
411 };
412
413 power-sensor@44 {
414 compatible = "ti,ina238";
415 reg = <0x44>;
416 shunt-resistor = <1000>;
417 };
418
419 power-sensor@45 {
420 compatible = "ti,ina238";
421 reg = <0x45>;
422 shunt-resistor = <1000>;
423 };
424
425 power-monitor@47 {
426 compatible = "ti,tps25990";
427 reg = <0x47>;
428 ti,rimon-micro-ohms = <430000000>;
429 };
430
431 temperature-sensor@48 {
432 compatible = "ti,tmp75";
433 reg = <0x48>;
434 };
435
436 temperature-sensor@49 {
437 compatible = "ti,tmp75";
438 reg = <0x49>;
439 };
440
441 /* PDB FRU */
442 eeprom@56 {
443 compatible = "atmel,24c128";
444 reg = <0x56>;
445 };
446
447 /* Paddle BD FRU */
448 eeprom@57 {
449 compatible = "atmel,24c128";
450 reg = <0x57>;
451 };
452
453 power-monitor@58 {
454 compatible = "renesas,isl28022";
455 reg = <0x58>;
456 shunt-resistor-micro-ohms = <1000>;
457 };
458
459 power-monitor@59 {
460 compatible = "renesas,isl28022";
461 reg = <0x59>;
462 shunt-resistor-micro-ohms = <1000>;
463 };
464
465 power-monitor@5a {
466 compatible = "renesas,isl28022";
467 reg = <0x5a>;
468 shunt-resistor-micro-ohms = <1000>;
469 };
470
471 power-monitor@5b {
472 compatible = "renesas,isl28022";
473 reg = <0x5b>;
474 shunt-resistor-micro-ohms = <1000>;
475 };
476
477 psu@5c {
478 compatible = "renesas,raa228006";
479 reg = <0x5c>;
480 };
481
482 fan-controller@5e{
483 compatible = "maxim,max31790";
484 reg = <0x5e>;
485 };
486
487 /* I2C MUX for PWRPIC #1, #2, #11, #12 */
488 i2c-mux@77 {
489 compatible = "nxp,pca9546";
490 reg = <0x77>;
491 #address-cells = <1>;
492 #size-cells = <0>;
493 i2c-mux-idle-disconnect;
494
495 /* PWRPIC #1 */
496 i2c8mux0ch0: i2c@0 {
497 reg = <0>;
498 #address-cells = <1>;
499 #size-cells = <0>;
500 };
501
502 /* PWRPIC #2 */
503 i2c8mux0ch1: i2c@1 {
504 reg = <1>;
505 #address-cells = <1>;
506 #size-cells = <0>;
507 };
508
509 /* PWRPIC #12 (Connector to CXL BD) */
510 i2c8mux0ch2: i2c@2 {
511 reg = <2>;
512 #address-cells = <1>;
513 #size-cells = <0>;
514
515 i2c-mux@70 {
516 compatible = "nxp,pca9546";
517 reg = <0x70>;
518 #address-cells = <1>;
519 #size-cells = <0>;
520 i2c-mux-idle-disconnect;
521
522 i2c30mux0ch0: i2c@0 {
523 reg = <0>;
524 #address-cells = <1>;
525 #size-cells = <0>;
526 };
527
528 i2c30mux0ch1: i2c@1 {
529 reg = <1>;
530 #address-cells = <1>;
531 #size-cells = <0>;
532 };
533
534 i2c30mux0ch2: i2c@2 {
535 reg = <2>;
536 #address-cells = <1>;
537 #size-cells = <0>;
538
539 adc@1e {
540 compatible = "ti,adc128d818";
541 reg = <0x1e>;
542 ti,mode = /bits/ 8 <1>;
543 };
544
545 adc@1f {
546 compatible = "ti,adc128d818";
547 reg = <0x1f>;
548 ti,mode = /bits/ 8 <1>;
549 };
550
551 /* CXL BD IOEXP */
552 gpio-expander@27 {
553 compatible = "nxp,pca9535";
554 reg = <0x27>;
555 gpio-controller;
556 #gpio-cells = <2>;
557 gpio-line-names =
558 "IRQ_TEMP_0_ALERT_N","IRQ_TEMP_1_ALERT_N",
559 "ALERT_PMBUS_0_N","ALERT_PMBUS_1_N",
560 "ALERT_PMBUS_2_N","IRQ_INA230_12V_ALERT_N",
561 "RST_IOX_CXL_N","DEBUG_UART_SEL_0",
562 "DEBUG_UART_SEL_1","BMC_REMOTEJTAG_EN_N",
563 "JTAG_BMC_3V3_CTL_CLR_N","DDR_CH02_I2C_MUX_SEL",
564 "DDR_CH13_I2C_MUX_SEL","SYS_OK",
565 "CXL_VRHOT_ALERT_R1_N","";
566 };
567
568 temperature-sensor@4a {
569 compatible = "ti,tmp75";
570 reg = <0x4a>;
571 };
572
573 temperature-sensor@4c {
574 compatible = "ti,tmp432";
575 reg = <0x4c>;
576 };
577
578 power-sensor@4d {
579 compatible = "ti,ina230";
580 reg = <0x4d>;
581 shunt-resistor = <2000>;
582 };
583
584 temperature-sensor@4e {
585 compatible = "ti,tmp75";
586 reg = <0x4e>;
587 };
588
589 /* CXL FRU */
590 eeprom@50 {
591 compatible = "atmel,24c64";
592 reg = <0x50>;
593 };
594 };
595
596 i2c30mux0ch3: i2c@3 {
597 reg = <3>;
598 #address-cells = <1>;
599 #size-cells = <0>;
600 };
601 };
602 };
603
604 /* PWRPIC #11 */
605 i2c8mux0ch3: i2c@3 {
606 #address-cells = <1>;
607 #size-cells = <0>;
608 reg = <3>;
609 };
610 };
611 };
612
613 &i2c9 {
614 status = "okay";
615
616 temperature-sensor@4b {
617 compatible = "ti,tmp75";
618 reg = <0x4b>;
619 };
620
621 /* SCM FRU */
622 eeprom@50 {
623 compatible = "atmel,24c128";
624 reg = <0x50>;
625 };
626
627 /* BSM FRU */
628 eeprom@56 {
629 compatible = "atmel,24c64";
630 reg = <0x56>;
631 };
632 };
633
634 /* MCIO 0A I2C */
635 &i2c10 {
636 status = "okay";
637
638 /* E1S EB IOEXP0 */
639 gpio-expander@21 {
640 compatible = "nxp,pca9535";
641 interrupt-parent = <&sgpiom0>;
642 interrupts = <172 IRQ_TYPE_EDGE_FALLING>;
643 reg = <0x21>;
644 gpio-controller;
645 #gpio-cells = <2>;
646 gpio-line-names =
647 "RST_SMB_E1S_0","LED_ACTIVE_E1S_0",
648 "E1S_0_PRSNT_N","RST_PCIE_E1S_0_PERST",
649 "E1S_0_PWRDIS","ALERT_INA_0",
650 "","",
651 "RST_SMB_E1S_1","LED_ACTIVE_E1S_1",
652 "E1S_1_PRSNT_N","RST_PCIE_E1S_1_PERST",
653 "E1S_1_PWRDIS","ALERT_INA_1",
654 "","";
655 };
656
657 /* E1S EB IOEXP1 */
658 gpio-expander@22 {
659 compatible = "nxp,pca9535";
660 interrupt-parent = <&sgpiom0>;
661 interrupts = <174 IRQ_TYPE_EDGE_FALLING>;
662 reg = <0x22>;
663 gpio-controller;
664 #gpio-cells = <2>;
665 gpio-line-names =
666 "P12V_E1S_EN_0","PWRGD_P12V_E1S_0",
667 "P12V_E1S_FLTB_0","PWRGD_P3V3_E1S_0",
668 "FM_P3V3_E1S_0_FAULT","P12V_E1S_EN_1",
669 "PWRGD_P12V_E1S_1","P12V_E1S_FLTB_1",
670 "PWRGD_P3V3_E1S_1","FM_P3V3_E1S_1_FAULT",
671 "","",
672 "","",
673 "PWRGD_P3V3_AUX","ALERT_TEMP";
674 };
675
676 power-sensor@40 {
677 compatible = "ti,ina233";
678 reg = <0x40>;
679 shunt-resistor = <2000>;
680 ti,maximum-expected-current-microamp = <32768000>;
681 };
682
683 power-sensor@45 {
684 compatible = "ti,ina233";
685 reg = <0x45>;
686 shunt-resistor = <2000>;
687 ti,maximum-expected-current-microamp = <32768000>;
688 };
689
690 adc@48 {
691 compatible = "ti,ads7830";
692 reg = <0x48>;
693 };
694
695 temperature-sensor@49 {
696 compatible = "ti,tmp75";
697 reg = <0x49>;
698 };
699
700 /* E1S EB FRU */
701 eeprom@54 {
702 compatible = "atmel,24c128";
703 reg = <0x54>;
704 };
705 };
706
707 &i2c11 {
708 status = "okay";
709
710 /* MB IOEXP */
711 gpio-expander@21 {
712 compatible = "nxp,pca9535";
713 interrupt-parent = <&sgpiom0>;
714 interrupts = <170 IRQ_TYPE_EDGE_FALLING>;
715 reg = <0x21>;
716 gpio-controller;
717 #gpio-cells = <2>;
718 gpio-line-names =
719 "ALERT_CLKMUX_0_LOSS_N","ALERT_CLKMUX_1_LOSS_N",
720 "ALERT_CLKMUX_2_LOSS_N","ALERT_CLKMUX_3_LOSS_N",
721 "FM_CLKMUX_0_SEL","FM_CLKMUX_1_SEL",
722 "FM_CLKMUX_2_SEL","FM_CLKMUX_3_SEL",
723 "RST_USB_HUB_0_N","FM_CLKGEN_GPIO2",
724 "","FM_BMC_RTC_RST",
725 "FM_P3V_BAT_SCALED_EN","",
726 "FM_CLKGEN_GPIO4","RST_USB_HUB_1_N";
727 };
728
729 power-sensor@40 {
730 compatible = "ti,ina230";
731 reg = <0x40>;
732 shunt-resistor = <2000>;
733 };
734
735 power-sensor@41 {
736 compatible = "ti,ina230";
737 reg = <0x41>;
738 shunt-resistor = <2000>;
739 };
740
741 power-sensor@42 {
742 compatible = "ti,ina230";
743 reg = <0x42>;
744 shunt-resistor = <2000>;
745 };
746
747 power-sensor@43 {
748 compatible = "ti,ina230";
749 reg = <0x43>;
750 shunt-resistor = <2000>;
751 };
752
753 power-sensor@44 {
754 compatible = "ti,ina230";
755 reg = <0x44>;
756 shunt-resistor = <2000>;
757 };
758
759 power-sensor@45 {
760 compatible = "ti,ina230";
761 reg = <0x45>;
762 shunt-resistor = <2000>;
763 };
764
765 adc@48 {
766 compatible = "ti,ads7830";
767 reg = <0x48>;
768 };
769
770 adc@49 {
771 compatible = "ti,ads7830";
772 reg = <0x49>;
773 };
774
775 adc@4b {
776 compatible = "ti,ads7830";
777 reg = <0x4b>;
778 };
779 };
780
781 /* MCIO 4A I2C */
782 &i2c12 {
783 multi-master;
784 mctp-controller;
785 status = "okay";
786
787 mctp@10 {
788 compatible = "mctp-i2c-controller";
789 reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
790 };
791 };
792
793 &i2c13 {
794 status = "okay";
795
796 power-sensor@40 {
797 compatible = "ti,ina230";
798 reg = <0x40>;
799 shunt-resistor = <2000>;
800 };
801
802 power-sensor@41 {
803 compatible = "ti,ina230";
804 reg = <0x41>;
805 shunt-resistor = <2000>;
806 };
807
808 power-sensor@44 {
809 compatible = "ti,ina230";
810 reg = <0x44>;
811 shunt-resistor = <2000>;
812 };
813
814 power-sensor@45 {
815 compatible = "ti,ina230";
816 reg = <0x45>;
817 shunt-resistor = <2000>;
818 };
819
820 temperature-sensor@48 {
821 compatible = "national,lm75b";
822 reg = <0x48>;
823 };
824
825 temperature-sensor@49 {
826 compatible = "national,lm75b";
827 reg = <0x49>;
828 };
829
830 /* CLKGEN FRU */
831 eeprom@50 {
832 compatible = "atmel,24c16";
833 reg = <0x50>;
834 };
835
836 /* MB FRU */
837 eeprom@51 {
838 compatible = "atmel,24c128";
839 reg = <0x51>;
840 };
841
842 /* CPU FRU */
843 eeprom@53 {
844 compatible = "atmel,24c128";
845 reg = <0x53>;
846 };
847
848 rtc@68 {
849 compatible = "dallas,ds1339";
850 reg = <0x68>;
851 };
852 };
853
854 /* PROT reserve */
855 &i2c14 {
856 status = "okay";
857 };
858
859 /* MCIO 3A I2C */
860 &i2c15 {
861 status = "okay";
862 };
863
864 &kcs2 {
865 aspeed,lpc-io-reg = <0xca8>;
866 status = "okay";
867 };
868
869 &kcs3 {
870 aspeed,lpc-io-reg = <0xca2>;
871 status = "okay";
872 };
873
874 &mac2 {
875 pinctrl-names = "default";
876 pinctrl-0 = <&pinctrl_ncsi3_default>;
877 use-ncsi;
878 status = "okay";
879 };
880
881 &pinctrl {
882 pinctrl_ncsi3_default: ncsi3_default {
883 function = "RMII3";
884 groups = "NCSI3";
885 };
886 };
887
888 &sgpiom0 {
889 ngpios = <128>;
890 bus-frequency = <2000000>;
891 gpio-line-names =
892 /*"input pin","output pin"*/
893 /*bit0-bit7*/
894 "PWRGD_CPU_PWROK","SGPIO_RSTBTN_OUT",
895 "PWRGD_CPU_PWROK_1","SGPIO_BMC_READY",
896 "PWRGD_CPU_PWROK_2","IBB_BMC_SRST",
897 "host0-ready","FM_I3C_SPD_AH_SEL_R",
898 "PCIe_HP_BOOT","FM_I3C_SPD_IP_SEL_R",
899 "PCIe_HP_DATA","FM_JTAG_BMC_MUX_S0_R",
900 "PCIe_HP_NIC","FM_JTAG_BMC_MUX_S1_R",
901 "","FM_JTAG_BMC_OE_1_R_N",
902 /*bit8-bit15*/
903 "PWRGD_PVDDCR_CPU0_P0","FM_JTAG_BMC_OE_R_N",
904 "PWRGD_PVDDCR_SOC_P0","FM_REMOTEJTAG_EN_R_N",
905 "PWRGD_PVDDCR_CPU1_P0","FM_CPU_FORCE_SELFREFRESH_R",
906 "PWRGD_P3V3_STBY","FM_CPU_NMI_SYNC_FLOOD_R_N",
907 "PWRGD_PVDD33_S5","FM_CPU_TRIGGERTSC_OE_R_N",
908 "PWRGD_PVDD18_S5_P0","FM_PASSWORD_CLEAR_R_N",
909 "PWRGD_PVDDIO_P0","FM_BIOS_USB_RECOVERY_N",
910 "PWRGD_PVDDIO_MEM_S3_P0","FM_USB_MUX_OE_R_N",
911 /*bit16-bit23*/
912 "PWRGD_P1V8_STBY","FM_USB_MUX_SEL_R",
913 "PWRGD_P1V0_STBY","RST_SMB_BOOT_R_N",
914 "PWRGD_P1V2_STBY","RST_SMB_MCIO0A_R_N",
915 "IBB_BMC_SRST","RST_SMB_NIC_R_N",
916 "PWRGD_P12V_E1S_0","FM_PPS_NIC_IN_BUF_OE_R_N",
917 "PWRGD_P12V_E1S_1","FM_PPS_NIC_IN_EN_R",
918 "RST_PCIE_BOOT_PERST_N","FM_PPS_NIC_IN_OE_R_N",
919 "PWRGD_P12V_NIC","FM_PPS_NIC_IN_S0_R",
920 /*bit24-bit31*/
921 "PWRGD_P12V_SCM","FM_PPS_NIC_IN_S1_R",
922 "PWRGD_P12V_DIMM","FM_PPS_NIC_OUT_BUF_OE_R_N",
923 "PWRGD_CPU_DIMM0_AH","FM_PPS_NIC_OUT_CPU_OE_R_N",
924 "PWRGD_CPU_DIMM1_IP","FM_PPS_NIC_OUT_EN_R",
925 "PWRGD_NIC_CPLD","JTAG_CPLD_DBREQ_R_N",
926 "ALERT_INA230_DIMM_0_N","HDT_HDR_RESET_R_N",
927 "ALERT_INA230_DIMM_1_N","FM_SMB_AUTH_MUX_OE_R_N",
928 "ALERT_INA230_E1S_0_N","FM_SCM_LED_R_N",
929 /*bit32-bit39*/
930 "ALERT_INA230_E1S_1_N","",
931 "ALERT_INA230_FAN0_N","",
932 "ALERT_INA230_FAN1_N","",
933 "ALERT_INA230_FAN2_N","",
934 "ALERT_INA230_FAN3_N","",
935 "ALERT_INA230_NIC_N","",
936 "ALERT_INA230_SCM_N","",
937 "ALERT_IRQ_PMBUS_PWR11_N","",
938 /*bit40-bit47*/
939 "ALERT_MCIO2A_LEAK_DETECT_N","",
940 "ALERT_MCIO3A_LEAK_DETECT_N","",
941 "ALERT_MCIO4A_LEAK_DETECT_N","",
942 "ALERT_OC_PADDLE2_N","",
943 "ALERT_OC_PWR2_N","",
944 "ALERT_OC_PWR11_N","",
945 "ALERT_PADDLE2_SMB_N","",
946 "ALERT_PWR14_SB2_LEAK_DETECT_N","",
947 /*bit48-bit55*/
948 "ALERT_PWR14_SB3_LEAK_DETECT_N","",
949 "ALERT_PWR15_SB2_LEAK_DETECT_N","",
950 "ALERT_PWR15_SB3_LEAK_DETECT_N","",
951 "ALERT_SMB_MCIO0A_N","",
952 "ALERT_SMB_MCIO1A_N","",
953 "ALERT_SMB_MCIO2A_N","",
954 "ALERT_SMB_MCIO2B_N","",
955 "ALERT_SMB_MCIO3A_N","",
956 /*bit56-bit63*/
957 "ALERT_SMB_MCIO3B_N","",
958 "ALERT_SMB_MCIO4A_N","",
959 "ALERT_SMB_MCIO4B_N","",
960 "ALERT_THERMALTRIP_MCIO1A_N","",
961 "ALERT_THERMALTRIP_MCIO2A_N","",
962 "ALERT_THERMALTRIP_MCIO3A_N","",
963 "ALERT_THERMALTRIP_MCIO4A_N","",
964 "ALERT_UV_PADDLE2_N","",
965 /*bit64-bit71*/
966 "ALERT_UV_PWR2_N","",
967 "ALERT_UV_PWR11_N","",
968 "ALERT_VR_SMB_N","",
969 "FAULT_FAN_0_N","",
970 "FAULT_FAN_1_N","",
971 "FAULT_FAN_2_N","",
972 "FAULT_FAN_3_N","",
973 "FAULT_P3V3_E1S_0_N","",
974 /*bit72-bit79*/
975 "FAULT_P3V3_E1S_1_N","",
976 "FAULT_P3V3_NIC_N","",
977 "FAULT_P12V_NIC_N","",
978 "FAULT_P12V_SCM_N","",
979 "P0_I3C_APML_ALERT_L","",
980 "ALERT_INLET_TEMP_N","",
981 "FM_CPU_PROCHOT_R_N","",
982 "FM_CPU_THERMTRIP_N","",
983 /*bit80-bit87*/
984 "ALERT_OUTLET_TEMP_N","",
985 "ALERT_RTC_N","",
986 "PVDDCR_CPU0_P0_OCP_N","",
987 "PVDDCR_CPU1_P0_OCP_N","",
988 "PVDDCR_SOC_P0_OCP_N","",
989 "MB_IOEXP_INT","",
990 "E1S_0_BD_IOEXP","",
991 "E1S_1_BD_IOEXP","",
992 /*bit88-bit95*/
993 "PADDLE_BD_IOEXP_INT","",
994 "FM_BOARD_REV_ID0","",
995 "FM_BOARD_REV_ID1","",
996 "FM_BOARD_REV_ID2","",
997 "FM_VR_TYPE_ID0","",
998 "FM_VR_TYPE_ID1","",
999 "PRSNT_BOOT_N_IOEXP","",
1000 "PRSNT_DATA_N_IOEXP","",
1001 /*bit96-bit103*/
1002 "PRSNT_NIC_N_IOEXP","",
1003 "PRSNT_BOOT_N_FF","",
1004 "PRSNT_MCIO1A_N_FF","",
1005 "NIC_PRSNT_N","",
1006 "","",
1007 "","",
1008 "","",
1009 "","",
1010 /*bit104-bit111*/
1011 "","","","","","","","","","","","","","","","",
1012 /*bit112-bit119*/
1013 "","","","","","","","","","","","","","","","",
1014 /*bit120-bit127*/
1015 "","","","","","","","","","","","","","","","";
1016 status = "okay";
1017 };
1018
1019 /* BIOS Flash */
1020 &spi2 {
1021 pinctrl-names = "default";
1022 pinctrl-0 = <&pinctrl_spi2_default>;
1023 status = "okay";
1024
1025 flash@0 {
1026 m25p,fast-read;
1027 label = "pnor";
1028 spi-max-frequency = <12000000>;
1029 spi-tx-bus-width = <2>;
1030 spi-rx-bus-width = <2>;
1031 status = "okay";
1032 };
1033 };
1034
1035 /* Host Console */
1036 &uart1 {
1037 status = "okay";
1038 };
1039
1040 &uart2 {
1041 status = "okay";
1042 };
1043
1044 /* SOL */
1045 &uart3 {
1046 status = "okay";
1047 };
1048
1049 &uart4 {
1050 status = "okay";
1051 };
1052
1053 /* BMC Console */
1054 &uart5 {
1055 status = "okay";
1056 };
1057
1058 &wdt1 {
1059 pinctrl-names = "default";
1060 pinctrl-0 = <&pinctrl_wdtrst1_default>;
1061 aspeed,reset-type = "soc";
1062 aspeed,external-signal;
1063 aspeed,ext-push-pull;
1064 aspeed,ext-active-high;
1065 aspeed,ext-pulse-duration = <256>;
1066 status = "okay";
1067 };