Debian Codegraph @

texmf-dist/doc/latex/circuit-macros/examples/dpv/pwrsupplyDPV.m4

raw
1 .PS
2 # pwrsupply.m4
3 cct_init
4 ifdef(`m4pco',`resetrgb')
5
6 ifelse(0,1,`
7 Singlephase:[
8 linewid = linewid*1.2
9 down_
10 T:transformer
11 line left_ elen_/8 from T.P1
12 rgbdraw(0,0,1,fuse(left_ elen_/3,D))
13 reversed(`switch',left_ elen_*2/3)
14 gap(down_ to (Here,T.P2))
15 { fuse(right_ 2*dimen_/5 at last []) }
16 line to T.P2
17 blen = dimen_/2
18 W: T.TS+(dimen_/2,0)
19 N: W+(blen,blen)
20 S: W+(blen,-blen)
21 E: S+(blen,blen)
22 diode(from W to N)
23 diode(from S to E)
24 G: gap(from E+(dimen_,0) down_ (E.y-S.y)*5/4); llabel(+,,-)
25 C: capacitor(down_ G.start.y-G.end.y from 0.5 between E and G.start,C)
26
27 setrgb(255,0,0)
28 line from T.S1 to (T.S1,N); line to N
29 dot
30 diode(to E); dot
31 line from E to G.start; dot
32 dot(at C.start)
33 resetrgb
34
35 setrgb(0,255,0,,D)
36 dot(at C.end)
37 dot(at G.end)
38 ground
39 line to (W,Here); line to W; dot
40 diode(to S); dot
41 line to (T.S2,Here); line to T.S2
42 resetrgb
43 ]
44
45 Threephase: [
46 L:[ loadht = 2*elen_
47 Load: ebox(down_ loadht,0.4,0.25); llabel(+,,-)
48 hsep = dimen_*3/4
49 for_(1,3,1,
50 `line left_ hsep; ifelse(m4x,3,,dot)
51 { diode(up_ loadht/3) ; line up_ loadht/3; diode(up_ loadht/3)
52 T`'m4x: ifelse(m4x,3,Here,dot)
53 line right hsep } ')
54 ]
55
56 T:[
57 X1: transformer(down_ dimen_*2/3,,,,4)
58 X2: transformer(down_ dimen_*2/3,,,,4) with .P1 at X1.P2
59 X3: transformer(down_ dimen_*2/3,,,,4) with .P1 at X2.P2
60 line from X1.M4Core1.end to X3.M4Core1.start
61 line from X1.M4Core2.end to X3.M4Core2.start
62 for_(1,3,1,
63 `move to X`'m4x.P2 ; ifelse(m4x,3,,dot)
64 line left_ dimen_
65 P`'m4x: dot(,,1)')
66 line left_ dimen_/2 from X1.P1 then down X1.P1.y-P3.y; dot
67 B: X1.S2+(dimen_/2,0)
68 line from X1.S1 right B.x-X1.S2.x then down X1.S1.y-X3.S1.y then to X3.S1
69 line from X2.S1 to (B,X2.S1); dot
70 ] with .X2.S2 at L.w-(dimen_,0)
71
72 line from T.X1.S2 to (L.T3,T.X1.S2); dot
73 line from T.X2.S2 to (L.T2,T.X2.S2); dot
74 line from T.X3.S2 to (L.T1,T.X3.S2); dot
75 ] with .sw at Singlephase.se+(0.3,0)
76 ')
77
78
79 #.PE
80 #.PS
81 # PS50.m4
82 # Fig 9.49 p. 630
83 #cct_init
84
85 PS50: [
86 svg_font(sans-serif,9bp__)
87
88 h = dimen_*2.5
89 T: dot
90 Cs: capacitor(down_ h/2)
91 llabel(,"C`'svg_sub(s)" ljust "0.1-1`'svg_micro`'F" ljust)
92 dot; { line right_ dimen_*3/4; ground(,,F) }
93 Rs: resistor(down_ Cs.len)
94 llabel(,"R`'svg_sub(s)" ljust "10`'svg_ohm-" ljust "100`'svg_ohm" ljust)
95 B: dot
96 Br: [ size=dimen_/2
97 N: dot; E: dot(at N+(size,-size))
98 W: dot(at N+(-size,-size)); S: dot(at W+(size,-size))
99 diode(from N to E); diode(from W to N)
100 diode(from W to S); diode(from S to E)
101 thinlines_
102 box dashed wid 3*size ht 3*size with .c at 0.5 between N and S
103 "GBU604" at last box.n above rjust ] with .W at Cs.end+(dimen_*3/2,0)
104 line from Br.N to (Br.N,T) then left Br.N.x-Cs.x+dimen_*3/4
105 { line from (Here,B) to (Br.S,B) then to Br.S }
106 T80: transformer(up_ h,,,W) with .P2 at Here
107 "115 V:80 V CT" at T80+(-dimen_/4,-h/2-dimen_/3) "4 A"
108
109 line from Br.E right dimen_/2 then up T.y-Br.E.y then right_ dimen_*2/3
110 dot; {C1: capacitor(down_ Cs.len+dimen_/3,C+); rlabel(,C`'svg_sub(1))
111 dot; C2: capacitor(down_ C1.len,C+); rlabel(,C`'svg_sub(2)); dot}
112 {"2 x 8200`'svg_micro`'F" \
113 at C1.start+(0,dimen_/2) "80 Vdc" }
114 {line right_ dimen_*3/2
115 P50: dot(,dotrad_*3/2,1)
116 "+50 V" at last [].e ljust "2 A" ljust }
117 dot(at 1/2 between Here and P50)
118 R2: resistor(down_ C1.len)
119 llabel(,"R`'svg_sub(2)" ljust "680" ljust "5 W" ljust)
120 {dot; line to (C1,Here)}
121 {line to (P50,Here); dot(,dotrad_*3/2,1)
122 "COM" wid 24bp__ at last [].e ljust}
123 R3: resistor(down_ C2.len)
124 llabel(,"R`'svg_sub(3)" ljust "680" ljust "5 W" ljust); dot
125 {line to (P50,Here); dot(,dotrad_*3/2,1);
126 "-50 V" at last [].e ljust "2 A" ljust }
127 line left_ Here.x-Br.W.x+dimen_/2; continue to (Here,Br.W) then to Br.W
128 line from T80.TP right_ (Rs.x-T80.TP.x)/2 \
129 then down_ T80.TP.y-B.y + (B.y-C2.end.y)/2
130 continue to (Br.E+(dimen_/2,0),Here)
131 continue to (Here,C2.start) then to C2.start
132 dot(at (T80.S2,T)-(dimen_*4/3,0))
133 { line from (T80.S2,T) to Here-(dimen_/2,0)
134 line dashed to Here-(dimen_/2,0) chop dimen_/10; In1: Here }
135 { line from (T80.S2,B) to (Here-(dimen_/2,0),B)
136 line dashed to Here-(dimen_/2,0) chop dimen_/10; In2: Here}
137 F2: fuse(down_ h/2,D)
138 llabel(,"F`'svg_sub(2)" ljust "100 svg_deg`'C" ljust "cutout" ljust)
139 MOV: ebox(down_ to (Here,B))
140 "MOV" at last [].e ljust "130 Vac" ljust "S20K130" ljust
141 variable(,uNN,,dimen_/2)
142 { arc dashed from 3rd last [].w-(2bp__,0) to 2nd last [].w-(2bp__,0) \
143 rad dimen_ }
144 dot(at MOV.end)
145
146 #SB: In1+(dimen_*4,dimen_/2)
147 #ST: SB+(0,h)
148 SB: In2
149 ST: In1
150 T880: transformer(right_ dimen_*7/8,,,WD1) at (ST+SB)/2-(2*dimen_,0)
151 line from T880.P2 to (T880.P2,SB) then to SB; dot(,dotrad_*3/2,1)
152 line from T880.S2 to (T880.S2,ST) then to ST; dot(,dotrad_*3/2,1)
153 line dashed from ST.e right_ dimen_/2 chop dimen_/10
154 line dashed from SB.e right_ dimen_/2 chop dimen_/10
155 dot(at (T880.P2,ST)+(dimen_,0))
156 Cy: capacitor(down_ h/2); rlabel(C`'svg_sub(y),,2.2 nF); dot
157 {line right_ dimen_/3; ground(,,F)}
158 capacitor(down_ to (Here,SB)); rlabel(C`'svg_sub(y),,2.2 nF); dot
159 Socket: pconnex(U,PF) at T880.w-(dimen_*3.5,0)
160 line right_ dimen_/2 from Socket.G.e; ground(,,F)
161 line from Socket.H.n to (Socket.H.n,ST);
162 F1: fuse(right_ dimen_,D); llabel(,"F1"); rlabel(,"6 A SB")
163 TS: lswitch(right_ dimen_*3/4,,D); { line to (T880.S1,Here) then to T880.S1 }
164 dot(at Here+(dimen_/2,0))
165 { R1: resistor(down_ to (Here,SB)); rlabel(,"R`'svg_sub(1)" rjust \
166 "1 M`'svg_ohm" rjust); dot }
167 dot(at Here+(dimen_/2,0))
168 Cx: capacitor(down_ to (Here,SB)); llabel(C`'svg_sub(x),,100 nF); dot
169 line from Socket.N.s to (Socket.N.s,SB) then to (TS.start,SB)
170 BS: lswitch(right_ TS.len,,D); { line dashed from TS to BS chop dimen_/3 }
171 line to (T880.P1,Here) then to T880.P1
172 "Qualtek 880-06/006" at Cx.start+(dimen_/2,dimen_/4)
173
174 command "</g>"
175 ] #with .nw at Singlephase.sw+(0,-0.2)
176
177 .PE