Debian Codegraph @

texmf-dist/doc/latex/circuit-macros/examples/ex01.m4

raw
1 .PS
2 # Timer.m4
3 cct_init
4 ifpostscript(,latexcommand({\small\sf))
5
6 define(`ic555DIP',`[Chip: box ht boxwid wid boxwid "555"
7 P7: "7" ljust at 1/6<Chip.sw,Chip.nw>
8 P6: "6" ljust at 1/2<Chip.sw,Chip.nw>
9 P2: "2" ljust at 5/6<Chip.sw,Chip.nw>
10 P4: "4" below at 1/3<Chip.nw,Chip.ne>
11 P8: "8" below at 2/3<Chip.nw,Chip.ne>
12 P3: "3" rjust at Chip.e
13 P1: "1" above at Chip.s
14 ]')
15
16 Timer: [
17 define(`elen_',`linewid')
18 Vs: dot
19 down_
20 variable(`resistor(,,E); llabel(,\SI{1}{M})')
21 resistor(,,E); llabel(,\SI{100}{\kilo{}})
22 capacitor(,E); llabel(\SI{220}{\micro{}})
23 Zero: dot
24
25 dot(at Vs+(elen_*4/3,0))
26 resistor(,,E); llabel(,\SI{33}{\kilo{}})
27 line to (Here,Zero) chop 0 chop elen_
28 C2: capacitor; llabel(\SI{0.1}{\micro{}})
29 dot
30
31 IC1: ic555DIP with .P7 at C2.start + (elen_,0)
32 line from IC1.P4 to (IC1.P4,Vs); dot
33 line from IC1.P8 to (IC1.P8,Vs); dot
34 line from IC1.P1 to (IC1.P1,Zero); dot
35 line from IC1.P2 to (C2,IC1.P2); dot
36 crossover(from IC1.P7 to (Zero,IC1.P7),R,C2); dot
37 line from IC1.P6 left elen_/2 then down IC1.P6.y-IC1.P7.y; dot
38 line from IC1.P3 right elen_*2/3
39 R: dot
40 line right_ elen_/3
41 B: buzzer(,,C) with .In3 at Here
42 line from B.In1 to (R,B.In1)
43 reversed(`diode',to (Here,Vs),LE); "red" at last line.c+(elen_/2,0)
44 resistor(down_ elen_ from R,,E); llabel(,\num{470})
45 diode(to (Here,Zero),LE); {"green" at last line.c+(elen_*2/3,0)}
46 line to Zero chop 0 chop -elen_
47 line up_ (Vs.y-Here.y)/3
48 battery(up_ (Vs.y-Here.y)/3); rlabel(,,\SI{9}{V})
49 switch(to (Here,Vs),,D)
50 line to (R,Vs)
51 ]
52 Ex01: [
53 # ex01.m4
54 linewid = linewid*1.5 # let's make the circuit elements bigger than usual
55 define(`elen_',linewid) # but not longer
56 del = elen_/4 # a spacing parameter
57
58 Vin: source(up_ elen_ + 2*del); llabel(-,v_s,+)
59
60 switch(right_ elen_,,C); rlabel(,t = 0,)
61 resistor; llabel(,47\`,'\Omega,); b_current(i_R\strut,above rjust)
62
63 line right_ elen_/2 then down_ del
64 parallel_(`inductor(,W); llabel(,L,); b_current(\>`'i_L)',
65 `capacitor(,C); rlabel(+,v_C,-); llabel(,,\;C)')
66 line to (Here,Vin.start) then to Vin.start
67
68 arcd(last []+(4pt__,0),del,30,330) <- ; "$i_2$" at last arc
69 arcd(Vin.c+(4*del,0),2*del,30,330) <- ; "$i_1$" at last arc
70
71 ] with .sw at Timer.se+(0.5,0)
72
73 ifpostscript(,latexcommand(}%))
74 .PE