| 1 |
.PS |
| 2 |
# Byte.m4 |
| 3 |
gen_init |
| 4 |
|
| 5 |
boxht = 0.2 |
| 6 |
boxwid = 3.8 |
| 7 |
|
| 8 |
define leftlabel { {"{\sf $1}" at last box.w ljust} } |
| 9 |
|
| 10 |
ifdpic(` |
| 11 |
down_ |
| 12 |
Lab[0]: box; leftlabel( B0STDISBL (reset pin is enabled) ) |
| 13 |
Lab[1]: box; leftlabel( WDTON (WDT not always on) ) |
| 14 |
Lab[2]: box; leftlabel( SPIEN (allow serial programming) ) |
| 15 |
Lab[3]: box; leftlabel( CKOPT (full output swing) ) |
| 16 |
Lab[4]: box; leftlabel( EESAVE (don\char39{}t preserve EEPB0OM over chip erase)) |
| 17 |
Lab[5]: box; leftlabel( BOOTSZ1 ) |
| 18 |
Lab[6]: box; leftlabel( BOOTSZ0 ) |
| 19 |
Lab[7]: box; leftlabel( BOOTB0ST (boot reset vector at 0x0000) ) |
| 20 |
|
| 21 |
boxwid = boxht |
| 22 |
left_ |
| 23 |
B0:box "\sf 1" with .e at Lab[0].nw + (0.75,0.5) |
| 24 |
box "\sf 0" |
| 25 |
box "\sf 0" |
| 26 |
box "\sf 1" |
| 27 |
box "\sf 0" |
| 28 |
box "\sf 0" |
| 29 |
box "\sf 1" |
| 30 |
box "\sf 1" |
| 31 |
box wid 2*boxht "\sf 0xc9" |
| 32 |
|
| 33 |
for i=0 to 7 do { |
| 34 |
spline -> ht arrowht*0.7 from B0.s-(i*boxht,0) down boxht/4 \ |
| 35 |
then to Lab[0].nw-((i+1)*boxht/2,0) \ |
| 36 |
then down Lab[0].nw.y-Lab[i].y then to Lab[i].w |
| 37 |
}', |
| 38 |
`box wid 1 ht 0.75 "Byte.m4" "requires" "dpic"') |
| 39 |
|
| 40 |
.PE |