| 1 |
ifdef(`View3d',,`threeD_init') |
| 2 |
divert(-1) |
| 3 |
# Shapedefs.m4 |
| 4 |
# 3D structures with complex surfaces and hidden lines are the domain of more |
| 5 |
# sophisticated software packages, but basic shapes can be drawn with pic. |
| 6 |
|
| 7 |
##################################################### |
| 8 |
|
| 9 |
`cylinder3D(xdispl,ydispl,zdispl,diameter, |
| 10 |
[colored "color"])' |
| 11 |
define(`cylinder3D',`[ Start: (0,0) |
| 12 |
xdispl = `$1'; ydispl = `$2'; zdispl = `$3' |
| 13 |
define(`M4CL',`xdispl,ydispl,zdispl')dnl |
| 14 |
lenc = length3D(M4CL) |
| 15 |
diamc = ifelse(`$4',,(lenc/2),`$4') ; radc = diamc/2 |
| 16 |
cs = dot3D(View3D,M4CL)/lenc |
| 17 |
End: Project(M4CL) |
| 18 |
az = atan2(ydispl,xdispl) |
| 19 |
ae = atan2(zdispl,sqrt(xdispl^2+ydispl^2)) |
| 20 |
CL: line invis from Start to End; C: CL.c |
| 21 |
nls = int(twopi_*radc/lthick) |
| 22 |
define(`M4PP',`rot3Dz(az,rot3Dy(-ae,rot3Dx(-i/nls*twopi_,0,0,radc)))')dnl |
| 23 |
for i=0 to nls-1 do { if dot3D(View3D,M4PP) > 0 then { |
| 24 |
P: Project(M4PP) |
| 25 |
ql = sqrta(dot3D(Light3D,M4PP)/radc) |
| 26 |
line from P to End+P outlined rgbstring(ql,ql,ql) `$5' } } |
| 27 |
Perp: (vperp(CL,radc)) |
| 28 |
if cs > 0 then { T: End; B: Start } else { T: Start; B: End } |
| 29 |
rpoint_(from Start to Perp) |
| 30 |
css = sqrta(cs) |
| 31 |
Top: rotellipse(diamc,diamc*cs, |
| 32 |
thick linethick/3 shaded rgbstring(css,css,css)) with .c at T |
| 33 |
W: line thick linethick/3 from T+Perp to B+Perp |
| 34 |
Bot: ellipsearc(diamc,diamc*cs,pi_,twopi_,rp_ang,cw, |
| 35 |
thick linethick/3) with .C at B |
| 36 |
E: line thick linethick/3 from B-Perp to T-Perp |
| 37 |
rpoint_(from Start to End) |
| 38 |
`$6']') |
| 39 |
|
| 40 |
`cone3D(xdispl,ydispl,zdispl,diameter, |
| 41 |
[colored "color"])' |
| 42 |
`internal positions: |
| 43 |
Start (centre of base), |
| 44 |
End (point), |
| 45 |
C (axis centre)' |
| 46 |
define(`cone3D',`[ Start: (0,0) |
| 47 |
xdispl = `$1'; ydispl = `$2'; zdispl = `$3' |
| 48 |
define(`M4CL',`xdispl,ydispl,zdispl')dnl |
| 49 |
lenc = length3D(M4CL) |
| 50 |
diamc = ifelse(`$4',,(lenc/2),`$4') ; radc = diamc/2 |
| 51 |
End: Project(M4CL) |
| 52 |
cs = dot3D(View3D,M4CL)/lenc |
| 53 |
az = atan2(ydispl,xdispl) |
| 54 |
ae = atan2(zdispl,sqrt(xdispl^2+ydispl^2)) |
| 55 |
CL: line invis from Start to End; C: CL.c |
| 56 |
nls = int(twopi_*radc/lthick) |
| 57 |
lt = sqrt(radc^2+lenc^2) |
| 58 |
b = 0 |
| 59 |
for i=0 to nls-1 do { if dot3D(View3D, |
| 60 |
rot3Dz(az,rot3Dy(-ae,rot3Dx(-i/nls*twopi_,radc,0,lenc)))) > 0 then { |
| 61 |
ql = sqrta(dot3D(Light3D, |
| 62 |
rot3Dz(az,rot3Dy(-ae,rot3Dx(-i/nls*twopi_,radc,0,lenc))))/lt) |
| 63 |
P: Project(rot3Dz(az,rot3Dy(-ae,rot3Dx(-i/nls*twopi_,0,0,radc)))) |
| 64 |
line from P to End outlined rgbstring(ql,ql,ql) `$5' |
| 65 |
if !b then { WB: P; b = 1 } |
| 66 |
} else { if b then { BW: P; b = 0 } } } |
| 67 |
if vlength(CL.x,CL.y) != 0 then { Perp: (vperp(CL,radc,R)) } \ |
| 68 |
else { Perp: (radc,0) } |
| 69 |
if cs >= 0 then { T: End; B: Start } else {T: Start; B: End } |
| 70 |
rpoint_(from Start to Perp) |
| 71 |
pout = (vlength(End.x,End.y) > abs(radc*cs)) |
| 72 |
if cs < 0 then { css = sqrta(cs) |
| 73 |
if pout then { line thick linethick/3 from BW to End then to WB } |
| 74 |
Bot: rotellipse(diamc,diamc*cs,thick linethick/3 \ |
| 75 |
ifelse(`$5',,`shaded rgbstring(css,css,css)',`$5')) with .c at T } \ |
| 76 |
else { if pout then { |
| 77 |
line thick linethick/3 from BW to End then to WB |
| 78 |
a = acos((WB.x*Perp.x+WB.y*Perp.y)/radc^2) |
| 79 |
Bot: ellipsearc(diamc,diamc*cs,a,pi_-a,rp_ang,cw, thick linethick/3) \ |
| 80 |
with .C at B } \ |
| 81 |
else { |
| 82 |
Bot: rotellipse(diamc,diamc*cs,thick linethick/3) with .c at B } } |
| 83 |
rpoint_(from Start to End) |
| 84 |
`$6']') |
| 85 |
`Arrow3D(xdispl,ydispl,zdispl, |
| 86 |
diam,arrowwid,arrowht)' |
| 87 |
define(`Arrow3D',`[ diam_Ar = ifelse(`$4',,linewid/10,`$4') |
| 88 |
wid_Ar = ifelse(`$5',,diam_Ar*2,`$5') |
| 89 |
ht_Ar = ifelse(`$6',,wid_Ar*2,`$6') |
| 90 |
x_Ar = ifelse(`$1',,1,`$1') |
| 91 |
y_Ar = ifelse(`$2',,1,`$2') |
| 92 |
z_Ar = ifelse(`$3',,1,`$3') |
| 93 |
define(`M4Arrow3D',`x_Ar,y_Ar,z_Ar')dnl |
| 94 |
len_Ar = length3D(M4Arrow3D) |
| 95 |
len_Shaft = len_Ar - ht_Ar |
| 96 |
cs_Ar = dot3D(View3D,M4Arrow3D) |
| 97 |
if cs_Ar >= 0 then { |
| 98 |
Shaft: cylinder3D(sprod3D(len_Shaft/len_Ar,M4Arrow3D),diam_Ar) |
| 99 |
Head: cone3D(sprod3D(ht_Ar/len_Ar,M4Arrow3D),wid_Ar) \ |
| 100 |
with .Start at Shaft.End } \ |
| 101 |
else { |
| 102 |
Head: cone3D(sprod3D(ht_Ar/len_Ar,M4Arrow3D),wid_Ar) |
| 103 |
Shaft: cylinder3D(sprod3D(len_Shaft/len_Ar,M4Arrow3D),diam_Ar) \ |
| 104 |
with .End at Head.Start } |
| 105 |
Start: Shaft.Start; End: Head.End |
| 106 |
`$7']') |
| 107 |
|
| 108 |
define(`f2xyz3D',``$1'x = `$2' |
| 109 |
`$1'y = `$3' |
| 110 |
`$1'z = `$4' ') |
| 111 |
|
| 112 |
`prism3D(xdispl,ydispl,zdispl,endwid,endht, |
| 113 |
(rad)rotation) |
| 114 |
args1-3 are the 3D coords of .End wrt .Start |
| 115 |
arg6 is rotation about x axis |
| 116 |
Defined points .Start, .End, .C' |
| 117 |
define(`prism3D',`[ Start: (0,0) |
| 118 |
xdispl = ifelse(`$1',,linewid,`$1') |
| 119 |
ydispl = ifelse(`$2',,linewid,`$2') |
| 120 |
zdispl = ifelse(`$3',,linewid,`$3') |
| 121 |
widp = ifelse(`$4',,(linewid/5),`$4') |
| 122 |
htp = ifelse(`$5',,(linewid/10),`$5') |
| 123 |
rotp = ifelse(`$6',,0,`$6') |
| 124 |
End: Project(xdispl,ydispl,zdispl); C: 0.5 between Start and End |
| 125 |
lenp = length3D(xdispl,ydispl,zdispl) |
| 126 |
az = atan2(ydispl,xdispl); ae = atan2(zdispl,sqrt(xdispl^2+ydispl^2)) |
| 127 |
wp2 = widp/2; hp2 = htp/2 |
| 128 |
# 3D coords of corners (B=back, F=front) |
| 129 |
f2xyz3D(nwB,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp, 0,-wp2, hp2)))) |
| 130 |
f2xyz3D(swB,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp, 0,-wp2,-hp2)))) |
| 131 |
f2xyz3D(seB,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp, 0, wp2,-hp2)))) |
| 132 |
f2xyz3D(neB,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp, 0, wp2, hp2)))) |
| 133 |
f2xyz3D(nwF,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp,lenp,-wp2, hp2)))) |
| 134 |
f2xyz3D(swF,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp,lenp,-wp2,-hp2)))) |
| 135 |
f2xyz3D(seF,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp,lenp, wp2,-hp2)))) |
| 136 |
f2xyz3D(neF,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp,lenp, wp2, hp2)))) |
| 137 |
# facets |
| 138 |
M4Facet3D(neF,nwF,swF,seF) |
| 139 |
M4Facet3D(neB,seB,swB,nwB) |
| 140 |
M4Facet3D(neF,seF,seB,neB) |
| 141 |
M4Facet3D(neF,neB,nwB,nwF) |
| 142 |
M4Facet3D(seF,swF,swB,seB) |
| 143 |
M4Facet3D(nwF,nwB,swB,swF) |
| 144 |
`$7']') |
| 145 |
|
| 146 |
`M4Facet3D( a,b,c,d )' |
| 147 |
define(`M4Facet3D',` |
| 148 |
define(`PFacet',`cross3D(diff3D(`$2'x,`$2'y,`$2'z,`$1'x,`$1'y,`$1'z), |
| 149 |
diff3D(`$3'x,`$3'y,`$3'z,`$2'x,`$2'y,`$2'z))') |
| 150 |
if dot3D(View3D,PFacet) > 0 then { |
| 151 |
fFacet = sqrta(dot3D(Light3D,PFacet)/length3D(PFacet)) |
| 152 |
P1: Project(`$1'x,`$1'y,`$1'z) |
| 153 |
P2: Project(`$2'x,`$2'y,`$2'z) |
| 154 |
P3: Project(`$3'x,`$3'y,`$3'z) |
| 155 |
P4: Project(`$4'x,`$4'y,`$4'z) |
| 156 |
line fill_(fFacet) invis from P1 to P2 then to P3 then to P4 then to P1 |
| 157 |
line from P1 to P2; round |
| 158 |
line to P3; round |
| 159 |
line to P4; round |
| 160 |
line to P1; round } ') |
| 161 |
|
| 162 |
`M4Pgram3D( c,dne,dnw )' |
| 163 |
define(`M4Pgram3D',` |
| 164 |
f2xyz3D(ne,sum3D(`$1'x,`$1'y,`$1'z,`$3'x,`$3'y,`$3'z)) |
| 165 |
f2xyz3D(nw,sum3D(`$1'x,`$1'y,`$1'z,`$2'x,`$2'y,`$2'z)) |
| 166 |
f2xyz3D(sw,diff3D(`$1'x,`$1'y,`$1'z,`$2'x,`$2'y,`$2'z)) |
| 167 |
f2xyz3D(se,diff3D(`$1'x,`$1'y,`$1'z,`$3'x,`$3'y,`$3'z)) |
| 168 |
define(`PPgrapm',`cross3D( |
| 169 |
diff3D(nwx,nwy,nwz,nex,ney,nez), |
| 170 |
diff3D(swx,swy,swz,nwx,nwy,nwz))') |
| 171 |
if dot3D(View3D,PPgram) > 0 then { |
| 172 |
fPgram = sqrta(dot3D(Light3D,PPgram)/length3D(PPgram)) |
| 173 |
P1: Project(`$1'x,`$1'y,`$1'z) |
| 174 |
P2: Project(`$2'x,`$2'y,`$2'z) |
| 175 |
P3: Project(`$3'x,`$3'y,`$3'z) |
| 176 |
P4: Project(`$4'x,`$4'y,`$4'z) |
| 177 |
line fill_(fPgram) invis from P1 to P2 then to P3 then to P4 then to P1 |
| 178 |
line from P1 to P2; round |
| 179 |
line to P3; round |
| 180 |
line to P4; round |
| 181 |
line to P1; round } ') |
| 182 |
`prism3D( |
| 183 |
xdispl,ydispl,zdispl,endwid,endht,(rad)rotation, |
| 184 |
index,dataname,r,g,b) |
| 185 |
Defined points .Start, .End, .C |
| 186 |
args1-3 are the input 3D coords of .End wrt .Start |
| 187 |
args4-5 define the end dimensions |
| 188 |
arg6 is rotation about x axis |
| 189 |
arg7 is the current depth of the data vector |
| 190 |
arg8 is the name (e.g. X) of the vector of |
| 191 |
stored face distance, color, and projected coords: |
| 192 |
eg X0[n]=[d,r]; X1[n]=[g,b] |
| 193 |
X2[n]=proj(C); X3[n]=proj(NE); X4[n]=proj(NW)' |
| 194 |
define(`prism3D',`[ Start: (0,0) |
| 195 |
xdispl = ifelse(`$1',,linewid,`$1') |
| 196 |
ydispl = ifelse(`$2',,linewid,`$2') |
| 197 |
zdispl = ifelse(`$3',,linewid,`$3') |
| 198 |
widp = ifelse(`$4',,(linewid/5),`$4') |
| 199 |
htp = ifelse(`$5',,(linewid/10),`$5') |
| 200 |
rotp = ifelse(`$6',,0,`$6') |
| 201 |
End: Project(xdispl,ydispl,zdispl); C: 0.5 between Start and End |
| 202 |
lenp = length3D(xdispl,ydispl,zdispl) |
| 203 |
az = atan2(ydispl,xdispl); ae = atan2(zdispl,sqrt(xdispl^2+ydispl^2)) |
| 204 |
wp2 = widp/2; hp2 = htp/2 |
| 205 |
# 3D coords of corners (B=back, F=front) |
| 206 |
f2xyz3D(nwB,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp, 0,-wp2, hp2)))) |
| 207 |
f2xyz3D(swB,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp, 0,-wp2,-hp2)))) |
| 208 |
f2xyz3D(seB,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp, 0, wp2,-hp2)))) |
| 209 |
f2xyz3D(neB,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp, 0, wp2, hp2)))) |
| 210 |
|
| 211 |
f2xyz3D(nwF,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp,lenp,-wp2, hp2)))) |
| 212 |
f2xyz3D(swF,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp,lenp,-wp2,-hp2)))) |
| 213 |
f2xyz3D(seF,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp,lenp, wp2,-hp2)))) |
| 214 |
f2xyz3D(neF,rot3Dz(az,rot3Dy(-ae,rot3Dx(rotp,lenp, wp2, hp2)))) |
| 215 |
# facets |
| 216 |
M4Facet3D(neF,nwF,swF,seF) |
| 217 |
M4Facet3D(neB,seB,swB,nwB) |
| 218 |
M4Facet3D(neF,seF,seB,neB) |
| 219 |
M4Facet3D(neF,neB,nwB,nwF) |
| 220 |
M4Facet3D(seF,swF,swB,seB) |
| 221 |
M4Facet3D(nwF,nwB,swB,swF) |
| 222 |
`$7']') |
| 223 |
|
| 224 |
|
| 225 |
##################################################### |
| 226 |
divert(0)dnl |