| 1 |
.PS |
| 2 |
# Tubediags.m4 |
| 3 |
|
| 4 |
cct_init |
| 5 |
include(tubedefs.m4) |
| 6 |
|
| 7 |
ifpostscript(,iflatex(`latexcommand({\sf)')) |
| 8 |
|
| 9 |
Overall:[ |
| 10 |
|
| 11 |
# Some base diagrams |
| 12 |
[ Loopover_(`xv',` |
| 13 |
V_`'xv: m4xpand(B_`'xv) ifelse(m4Lx,1,, |
| 14 |
`with .Base at last [].Base+(dimen_*3,0)') |
| 15 |
"xv" at V_`'xv.Base.s+(0,-dimen_/3) below', |
| 16 |
2AG,2D,4BB,9K) ] |
| 17 |
|
| 18 |
# Test circuit |
| 19 |
[ |
| 20 |
Ld: dot |
| 21 |
battery(up dimen_,2) |
| 22 |
line right_ dimen_ |
| 23 |
Pot1: potentiometer(down_ dimen_*2,5) with .Start at Here |
| 24 |
line from Pot1.End left_ dimen_ |
| 25 |
battery(up_ to Ld,2) |
| 26 |
Tg: dot(at Pot1.T1) |
| 27 |
source(right_ dimen_ from Pot1.T1,"\scriptsize \si{\mu A}") |
| 28 |
line right_ dimen_/3 |
| 29 |
Tr: triode with .G1.w at Here |
| 30 |
line from Tr.K1.sw to (Tr.K1.sw,Pot1.End); dot |
| 31 |
{ line down dimen_/2 |
| 32 |
B: dot } |
| 33 |
source(to (Tg,Here),"\scriptsize V"); corner; line to Tg |
| 34 |
line from Tr.P1.c to (Tr.P1.c,Pot1.Start) |
| 35 |
source(right_ elen_,"\scriptsize mA"); llabel(-,,+); rlabel(,I_b) |
| 36 |
Tp: dot |
| 37 |
{ source(down_ to (Here,B),"\scriptsize V"); llabel(+,,-); rlabel(,E_b); dot} |
| 38 |
line right_ dimen_/2 then down_ (Here.y-B.y)/2 then right_ dimen_/2 |
| 39 |
P2: potentiometer(down_ Tp.y-B.y,5,0.5,-dimen_/6) with .T1 at Here |
| 40 |
dot(at P2.End) |
| 41 |
line right_ dimen_ from P2.Start; corner |
| 42 |
battery(down_ dimen_*3/4,2,R) |
| 43 |
T: Here |
| 44 |
battery(up_ dimen_*3/4 from (Here,B),2) |
| 45 |
line dashed up_ to T "B" ljust |
| 46 |
line from (T,B) left T.x-Ld.x+dimen_/2 then up Ld.y-B.y then to Ld |
| 47 |
] with .nw at last [].sw + (0,-dimen_/2) |
| 48 |
|
| 49 |
# Circuit of 25 W amplifier (adapted from F. Langford-Smith, "Radiotron |
| 50 |
# Designer's Handbook," fourth edition, Harrison, NJ, Radio Corporation |
| 51 |
# of America, 1952) |
| 52 |
|
| 53 |
define(`OutputXformer',`[ pushdef(`dimen_',dimen_*1.5) |
| 54 |
S1: inductor(up_ dimen_*.4,L,3,M) |
| 55 |
{ line right_ dimen_/4 from last [].e; S2T: dot(,,1) |
| 56 |
line from S1.end right_ S2T.x-S1.end.x; S21: dot(,,1) |
| 57 |
line from S1.start right_ S2T.x-S1.end.x; S22: dot(,,1) } |
| 58 |
move up_ dimen_/8 |
| 59 |
S2: inductor(up_ dimen_*.4,L,3,M) |
| 60 |
{ line right_ dimen_/4 from last [].e; S1T: dot(,,1) |
| 61 |
line from S2.end right_ S2T.x-S2.end.x; S11: dot(,,1) |
| 62 |
line from S2.start right_ S2T.x-S2.end.x; S12: dot(,,1) } |
| 63 |
line down_ dimen_/8 from M4Core1.start |
| 64 |
line down_ dimen_/8 from M4Core2.start |
| 65 |
P: inductor(down_ dimen_*0.6 with .c at 0.5 between S1.end and S2.start \ |
| 66 |
-(dimen_*0.8,0),L,5,) |
| 67 |
P1: P.start |
| 68 |
P2: P.end |
| 69 |
PT: last [].w |
| 70 |
popdef(`dimen_')]') |
| 71 |
|
| 72 |
define(`PowerXformer',`[ pushdef(`dimen_',dimen_*1.5) |
| 73 |
S3: inductor(up_ dimen_*.2,L,1,M) |
| 74 |
ST3: last [].e |
| 75 |
{ line up_ dimen_/10 from M4Core1.end; line up_ dimen_/10 from M4Core2.end } |
| 76 |
S2: inductor(up_ dimen_*.2 from S3.end+(0,dimen_/10),L,1,M) |
| 77 |
{ line up_ dimen_/10 from M4Core1.end; line up_ dimen_/10 from M4Core2.end } |
| 78 |
S1: inductor(up_ dimen_*.4 from S2.end+(0,dimen_/10),L,3,M) |
| 79 |
ST1: last [].e |
| 80 |
P: inductor(down_ dimen_*0.6 with .c at 0.5 between S1.end and S3.start \ |
| 81 |
-(dimen_*0.8,0),L,5,) |
| 82 |
popdef(`dimen_')]') |
| 83 |
|
| 84 |
[ Toprail: Here |
| 85 |
#{"Toprail"} |
| 86 |
resistor(down_ dimen_); rlabel(,\SI{100}{\kilo{}}) |
| 87 |
V1P: dot |
| 88 |
#{"V1P" rjust} |
| 89 |
line down_ dimen_*3/4 |
| 90 |
V1: triode(,W) with .P1 at Here |
| 91 |
{"6SL7" at V1.nw above } |
| 92 |
resistor(down_ dimen_*3/2 from V1.K1.sw); llabel(,2200) |
| 93 |
Rail1: dot |
| 94 |
#{"Rail1"} |
| 95 |
ground |
| 96 |
arrow left_ from V1.G1.w |
| 97 |
RP: Here |
| 98 |
arrow <- right from (Here,Rail1) to Rail1 |
| 99 |
dot(at last arrow) |
| 100 |
resistor(up_ 2nd last arrow.y-Here.y); llabel(,\SI{22}{\kilo{}}); dot |
| 101 |
{ move left_ dimen_ }; "Pickup" at RP below |
| 102 |
capacitor(right_ dimen_ from V1P,C,R); llabel(,\SI{0.05}{\micro{}}) |
| 103 |
resistor(down_ dimen_); rlabel(,\SI{470}{\kilo{}}) |
| 104 |
V1o: dot |
| 105 |
#{ "V1o" at V1o rjust } |
| 106 |
resistor(down_ (Here.y-Rail1.y)/2); rlabel(,\SI{22}{\kilo{}}) |
| 107 |
dot |
| 108 |
{ capacitor(down_ Here.y-Rail1.y,C); rlabel(,\SI{0.01}{\micro{}}); dot } |
| 109 |
line right_ dimen_/2 |
| 110 |
R47: resistor(down_ to (Here,Rail1)); llabel(,,\SI{4.7}{\mega{}}) |
| 111 |
line to Rail1 |
| 112 |
|
| 113 |
Pot1: potentiometer(down_ dimen_,,0.5,dimen_*2/3) \ |
| 114 |
with .T1 at (V1o+(elen_+dimen_*2/3,0),V1.G1) |
| 115 |
{ line from Pot1.Start left_ (Pot1.Start.x-V1o.x)/2 |
| 116 |
continue to (Here,V1o) then to V1o } |
| 117 |
line from Pot1.End down_ dimen_/3 |
| 118 |
Rail2: dot |
| 119 |
ground |
| 120 |
V2: triode(,E) with .G1.w at Pot1.T1; "6SL7" at V2.ne above |
| 121 |
resistor(from Rail2 right_ V2.K1.e.x-Rail2.x); rlabel(,\SI{22}{\kilo{}}); dot |
| 122 |
{ capacitor(right_ dimen_,C,R); rlabel(,\SI{2}{\nano{}}) |
| 123 |
V2k: dot } |
| 124 |
#{ "V2k" at V2k above } |
| 125 |
{ line down_ to (Here,Rail1) |
| 126 |
variable(`resistor(right_ dimen_); rlabel(,\SI{1}{\mega{}});') |
| 127 |
line up_ to V2k } |
| 128 |
line to V2.K1.se |
| 129 |
|
| 130 |
line from Toprail to (R47,Toprail); dot |
| 131 |
{ capacitor(down_ dimen_,C); rlabel(\SI{10}{\micro{}}); ground(,T) } |
| 132 |
R51k: resistor(right_ dimen_); rlabel(,\SI{51}{\kilo{}}); dot |
| 133 |
{ capacitor(down_ dimen_,C); llabel(\SI{10}{\micro{}}); ground(,T) } |
| 134 |
dot(at (V2.P1.c,Here)) |
| 135 |
resistor(down_ dimen_); llabel(,\SI{100}{\kilo{}}) |
| 136 |
V2p: dot |
| 137 |
line to V2.P1 |
| 138 |
|
| 139 |
V3: triode(,W) with .G1.w at (V2k+(dimen_,0),V2.G1) |
| 140 |
"$\;$6SL7" at V3.n below ljust |
| 141 |
resistor(from V3.K1.sw to (V3.K1.sw,Rail1)); llabel(,\SI{1.5}{\kilo{}}); dot; ground |
| 142 |
line left_ dimen_/2 |
| 143 |
resistor(up_ to (Here,V3.G1)); llabel(2.2); rlabel(\hbox{M}); dot |
| 144 |
{ line to V3.G1.w } |
| 145 |
line to (Here,V2p); capacitor(left_ to V2p,C,R); rlabel(,\SI{3}{\nano{}}) |
| 146 |
|
| 147 |
dot(at (V3.P1.c,Toprail)); { line to R51k.end } |
| 148 |
resistor(down_ dimen_); llabel(,\SI{51}{\kilo{}}) |
| 149 |
V3p: dot |
| 150 |
#{"V3p"} |
| 151 |
line down_ (Here.y-V3.n.y)/2 |
| 152 |
V3q: dot; { line to V3.P1.c } |
| 153 |
capacitor(left_ dimen_*2/3,C); rlabel(,\SI{0.1}{\micro{}}) |
| 154 |
line to (V2k,Here) |
| 155 |
resistor(down_ to V2k); rlabel(0.1); llabel(\si{\mega{}}) |
| 156 |
#{"V2k" at V2k} |
| 157 |
|
| 158 |
V4: triode(,E) with .G1.w at (V3.G1.e+(dimen_*2,0),V3.G1) |
| 159 |
"6SL7" at V4.n above rjust |
| 160 |
resistor(from V4.K1.se to (V4.K1.se,Rail1)); rlabel(,,\SI{1.5}{\kilo{}}) |
| 161 |
V4k: dot |
| 162 |
#{"V4k"} |
| 163 |
line left dimen_*3/4 |
| 164 |
V4k1: dot |
| 165 |
{ resistor(up_ V4.G1.y-Here.y); llabel(,,\SI{2.2}{\mega{}}) |
| 166 |
V4G: dot } |
| 167 |
line from V3p right_ dimen_ |
| 168 |
variable(`resistor(down_ to (Here,V4.G1)); llabel(\SI{100}{\kilo{}})') |
| 169 |
V3o: dot |
| 170 |
capacitor(right_ to V4G,C); llabel(,\SI{3}{\nano{}}) |
| 171 |
line to V4.G1.w |
| 172 |
resistor(left_ from V4k1 to (V3o,V4k)); rlabel(,\SI{51}{\kilo{}}); dot |
| 173 |
ground |
| 174 |
capacitor(down_ from V3o to Here,C); llabel(,,\SI{500}{\pico{}}) |
| 175 |
|
| 176 |
line from V4.P1.c to (V4.P1.c,V3p); |
| 177 |
resistor(up_ dimen_); llabel(,\SI{51}{\kilo{}}); dot |
| 178 |
resistor(left_ to (V3p,Here)); llabel(,\SI{10}{\kilo{}}) |
| 179 |
|
| 180 |
V5: triode(,N) with .G1.w at V4.G1.e+(2.25*dimen_,0) |
| 181 |
"6SL7" at V5.n above rjust |
| 182 |
V6: triode(,SR) with .G1.w at V5.G1.w-(0,dimen_*2.5) |
| 183 |
"6SL7" at (V6.w,V6.P1) below rjust |
| 184 |
|
| 185 |
V4p: dot(at (V4.P1.c,V3p)) |
| 186 |
#{"V4p"} |
| 187 |
line right_ dimen_*2/3; capacitor(right_ dimen_,C); llabel(,\SI{3}{\pico{}}) |
| 188 |
line down_ to (Here,V5.G1) |
| 189 |
V5G: dot; { line to V5.G1.w } |
| 190 |
#{"V5G"} |
| 191 |
resistor(down_ dimen_); rlabel(,\num{2.2}); llabel(,\si{\mega{}}); dot |
| 192 |
resistor(right_ to (V5.K1.sw,Here)); llabel(,\SI{1}{\kilo{}}) |
| 193 |
V5K: dot |
| 194 |
#{"V5K"} |
| 195 |
line to V5.K1.sw |
| 196 |
line from V4k down_ V4k.y-V6.G1.y then right_ V5G.x-V4k.x - dimen_ |
| 197 |
capacitor(right_ dimen_,C); rlabel(,\SI{3}{\pico{}}) |
| 198 |
V6G: dot; { line to V6.G1.w } |
| 199 |
#{"V6G"} |
| 200 |
resistor(up_ dimen_); llabel(,2.2); rlabel(,\si{\mega{}}); dot |
| 201 |
resistor(right_ to (V6.K1.nw,Here)); llabel(,\SI{1}{\kilo{}}) |
| 202 |
V6K: dot |
| 203 |
#{"V6K"} |
| 204 |
line to V6.K1.nw |
| 205 |
resistor(left_ dimen_*2/3 from (V6G,V6K));rlabel(,\SI{1}{\kilo{}}) dot; ground |
| 206 |
line to (Here,V5K); resistor(right_ dimen_*2/3); llabel(,\SI{1}{\kilo{}}) |
| 207 |
|
| 208 |
PV: dot(at (V4.e.x+dimen_/5,Toprail.y)) |
| 209 |
#{"PV"} |
| 210 |
line from V6.P1.c down_ V4p.y-V4.P1.c.y |
| 211 |
Rail2: dot |
| 212 |
#{"Rail2" below} |
| 213 |
line from PV to (PV,Rail2); corner |
| 214 |
{ resistor(right_ to Rail2); llabel(,\SI{220}{\kilo{}}) } |
| 215 |
move up_ dimen_*2/3; dot; line left_ dimen_/2 |
| 216 |
V6sw: dot |
| 217 |
#{"V6sw"} |
| 218 |
capacitor(down_ dimen_*2/3,C); rlabel(,\SI{10}{\micro{}}); ground(,T) |
| 219 |
|
| 220 |
V5P: dot(at (V6.P1.c,V4p)); { line to V5.P1.c } |
| 221 |
#{"V5P"} |
| 222 |
resistor(to (Here,Toprail)); rlabel(,\SI{220}{\kilo{}}) |
| 223 |
line to (V4p,Here) |
| 224 |
|
| 225 |
V7: V_6L6G at (V3,Rail2+(0,-2*dimen_)); "6L6G" at V7.n above ljust |
| 226 |
V8: V_6L6G(,R) at V7+(0,-2*dimen_); "6L6G" at V8.s below ljust |
| 227 |
line right dimen_/4 from V7.G2.e; resistor(right_ dimen_); llabel(,100); |
| 228 |
V9G: dot |
| 229 |
#{"V9G"} |
| 230 |
line right dimen_/4 from V8.G2.e; resistor(right_ dimen_); llabel(,100); |
| 231 |
V9: V_6L6G(,,G2) with .G2.w at V9G+(dimen_/2,0); "6L6G" at V9.n above rjust |
| 232 |
V10: V_6L6G(,R,G2) at V9+(0,-2*dimen_); "6L6G" at V10.s below rjust |
| 233 |
line from V9G to V9.G2.w |
| 234 |
line from V10.G2.w left_ dimen_/2 |
| 235 |
L910: line from V9G to (V9G,V10.G2); dot |
| 236 |
line left_ dimen_/2 from V7.G1.w |
| 237 |
V7G: dot |
| 238 |
#{"V7G"} |
| 239 |
resistor(down_ to 0.5 between Here and (Here,V10.G1)) |
| 240 |
rlabel(,\SI{220}{\kilo{}}) |
| 241 |
V7T: dot |
| 242 |
#{"V7T"} |
| 243 |
{ line left_ dimen_/3; corner; ground } |
| 244 |
line from V8.G1.w to (V7G,V8.G1); dot |
| 245 |
resistor(up_ to V7T); llabel(,\SI{220}{\kilo{}}) |
| 246 |
|
| 247 |
line from V9.K1.sw to V10.K1.nw |
| 248 |
line from V7.K1.sw to V8.K1.nw |
| 249 |
V7K: dot(at last line.c+(0,dimen_/8)) |
| 250 |
#{"V7K"} |
| 251 |
line left_ dimen_*2; dot |
| 252 |
{ capacitor(down_ dimen_/2,C); llabel(,\SI{50}{\micro{}}); ground(,T) } |
| 253 |
PP: potentiometer(left_ dimen_,,0.5,dimen_/2) with .Start at Here |
| 254 |
rlabel(,50\ \SI{10}{W}) |
| 255 |
corner(,at PP.T1); line left_ dimen_ then up_ dimen_/4 |
| 256 |
round(,tubethick) |
| 257 |
line thick tubethick up tubeplatelen/3 left tubeplatelen*2/9 |
| 258 |
round(,tubethick) |
| 259 |
line thick tubethick down tubeplatelen/3 left tubeplatelen*2/9 |
| 260 |
line down_ dimen_/4 then left_ dimen_ then up_ dimen_/4 |
| 261 |
round(,tubethick) |
| 262 |
line thick tubethick up tubeplatelen/3 left tubeplatelen*2/9 |
| 263 |
round(,tubethick) |
| 264 |
line thick tubethick down tubeplatelen/3 left tubeplatelen*2/9 |
| 265 |
line down_ dimen_/4; ground |
| 266 |
"1st two 6SL7" at Here+(dimen_*3/4,dimen_/2) above |
| 267 |
|
| 268 |
V9T: dot(at (L910,V7K)-(0,dimen_/4)) |
| 269 |
#{"V9T"} |
| 270 |
|
| 271 |
line right_ dimen_/2 from V9.G1.e; continue to (Here,V9.P1)+(0,dimen_*2/3) |
| 272 |
resistor(left_ to (V7G,Here)); llabel(,100) |
| 273 |
V7nw: dot; { line to (Here,V7.G1) } |
| 274 |
line right_ dimen_/2 from V10.G1.e; continue to (Here,V10.P1)-(0,dimen_*2/3) |
| 275 |
resistor(left_ to (V7G,Here)); rlabel(,100) |
| 276 |
V8sw: dot; { line to (Here,V8.G1) } |
| 277 |
|
| 278 |
line from V9.P1.c up_ dimen_ |
| 279 |
V9P: dot |
| 280 |
line from V10.P1.c down_ dimen_ |
| 281 |
V10P: dot |
| 282 |
#{"V10P"} |
| 283 |
|
| 284 |
line from V7.P1.c up_ V9P.y-V7.P1.y then to V9P |
| 285 |
resistor(right_ to (V5.e+(dimen_/4,0),Here)) |
| 286 |
rlabel(,\shortstack{\SI{100}{\kilo{}}\\ \SI{2}{W}}) |
| 287 |
Rt1: Here |
| 288 |
line to (Here,V6.e)+(0,dimen_/6); resistor(up_ dimen_) |
| 289 |
llabel(,\shortstack{\SI{100}{\kilo{}}\\ \SI{2}{W}}) |
| 290 |
line to (Here,V5K) then to V5K |
| 291 |
line from V8.P1.c down_ V8.P1.y-V10P.y then to V10P |
| 292 |
resistor(right_ to (V6.e+(dimen_/2,0),Here)) |
| 293 |
llabel(,\shortstack{\SI{100}{\kilo{}}\\ \SI{2}{W}}) |
| 294 |
resistor(up_ dimen_*3/2) |
| 295 |
llabel(,\shortstack{\SI{100}{\kilo{}}\\ \SI{2}{W}}) |
| 296 |
line to (Here,V6K) then to V6K |
| 297 |
|
| 298 |
line from V9T to (V9.e+(dimen_*3/4,0),V9T) |
| 299 |
Xout: OutputXformer with .PT at Here |
| 300 |
line from Xout.P1 to (Xout.P1,V9P); dot |
| 301 |
line from Xout.P2 to (Xout.P1,V10P); dot |
| 302 |
line from Xout.PT left_ dimen_/4 |
| 303 |
XT: dot |
| 304 |
|
| 305 |
resistor(from V6sw left_ dimen_); rlabel(,\SI{10}{\kilo{}}) |
| 306 |
XP: dot |
| 307 |
{ line down_ dimen_; continue to (XT,Here) then to XT } |
| 308 |
|
| 309 |
capacitor(right_ dimen_*5/4 from V5P,C); llabel(,\SI{0.1}{\micro{}}) |
| 310 |
corner; line to (Here,Rail2)-(0,dimen_/2) |
| 311 |
continue to (V7nw,Here) then to V7nw |
| 312 |
line from V8sw down_ dimen_*5/8 |
| 313 |
continue to (Rail2,Here) then to (Rail2,V9.n) |
| 314 |
capacitor(up_ dimen_/2,C,R); rlabel(,\SI{0.1}{\micro{}}) |
| 315 |
line to Rail2 |
| 316 |
|
| 317 |
line from XP left_ dimen_*2; dot |
| 318 |
{ dot(at Here+(dimen_,0)) |
| 319 |
{ "290 V" at last [].n above } |
| 320 |
R100: resistor(down_ dimen_*2/3) |
| 321 |
llabel(,\shortstack{\SI{100}{\kilo{}}\\ \SI{2}{W}}); dot; ground } |
| 322 |
{ capacitor(down_ dimen_*2/3,C); llabel(,\SI{40}{\micro{}}); dot } |
| 323 |
reversed(`inductor',left_ dimen_,L,,M); rlabel(,\SI{4}{H}\; \SI{300}{\mA}) |
| 324 |
Filt: dot |
| 325 |
{ capacitor(down_ dimen_*2/3,C); llabel(,\SI{40}{\micro{}}) |
| 326 |
line to R100.end } |
| 327 |
|
| 328 |
Pwr: [ |
| 329 |
PXform: PowerXformer |
| 330 |
line left_ dimen_/4 from PXform.P.start; fuse(left_ dimen_/2,D) |
| 331 |
AC1: arrow left_ dimen_/2 |
| 332 |
AC2: arrow from PXform.P.end to (AC1.end,PXform.P.end) |
| 333 |
"AC" at 0.5 between AC1.end and AC2.end ljust |
| 334 |
dot(at PXform.ST3); line right_ dimen_/4; dot |
| 335 |
dot(at PXform.ST1); line right_ dimen_/4 then down_ dimen_*3/2; ground(,T) |
| 336 |
line from PXform.S2.end right_ dimen_*2.5 then up_ dimen_/4 |
| 337 |
Rect2: V_5U4G with .F1.sw at Here; "5U4G" at Rect2.n+(0,dimen_/2) |
| 338 |
Rect1: V_5U4G with .e at Rect2.w-(dimen_/2,0); "5U4G" at Rect1.n+(0,dimen_/2) |
| 339 |
move to Rect1.F1.sw; line to (Here,PXform.S2.end); dot |
| 340 |
move to Rect1.F1.se; line to (Here,PXform.S2.start); dot |
| 341 |
move to Rect2.F1.se; line to (Here,PXform.S2.start) |
| 342 |
PO: dot |
| 343 |
line from Rect1.P1 left_ dimen_/2; dot |
| 344 |
{ line to (Here,PXform.S1.start) then to PXform.S1.start } |
| 345 |
line to (Here,Rect1.n)+(0,dimen_/8) |
| 346 |
continue to (Rect1.P2+(dimen_/2,0),Here) |
| 347 |
continue to (Here,Rect1.P2) then to Rect1.P2 |
| 348 |
line from Rect2.P1 left_ dimen_/2 then up_ Rect2.ht/2+dimen_/4; dot |
| 349 |
{ line to (Rect2.P2+(dimen_/2,0),Here) |
| 350 |
continue to (Here,Rect2.P2) then to Rect2.P2 } |
| 351 |
move to PXform.S1.end |
| 352 |
line right_ dimen_/8 then up last [].y - Here.y then to last [].w |
| 353 |
arrow from PXform.S3.start right_ dimen_ |
| 354 |
arrow from PXform.S3.end right_ dimen_ |
| 355 |
"\SI{5}{V}" at PXform.S2 + (dimen_*3/4,0) |
| 356 |
"\SI{6.3}{V}" at 0.5 between last arrow.end and 2nd last arrow.end ljust |
| 357 |
] with .nw at (RP,Filt)+(0,dimen_/4) |
| 358 |
line from Pwr.PXform.S2.start to Pwr.PO + (dimen_*3/4,0); corner |
| 359 |
resistor(up_ to (Here,Filt)); rlabel(,\shortstack{V\\\hbox{adj}}); corner |
| 360 |
line to Filt |
| 361 |
|
| 362 |
] with .nw at last [].sw+(0,-0.5) |
| 363 |
#showbox_ |
| 364 |
|
| 365 |
] |
| 366 |
#showbox_ |
| 367 |
#print last [].wid,last [].ht |
| 368 |
|
| 369 |
ifpostscript(,iflatex(latexcommand(}))) |
| 370 |
.PE |