| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* drivers/net/phy/smsc.c |
| 4 |
* |
| 5 |
* Driver for SMSC PHYs |
| 6 |
* |
| 7 |
* Author: Herbert Valerio Riedel |
| 8 |
* |
| 9 |
* Copyright (c) 2006 Herbert Valerio Riedel <[email protected]> |
| 10 |
* |
| 11 |
* Support added for SMSC LAN8187 and LAN8700 by [email protected] |
| 12 |
* |
| 13 |
*/ |
| 14 |
|
| 15 |
#include <linux/clk.h> |
| 16 |
#include <linux/kernel.h> |
| 17 |
#include <linux/module.h> |
| 18 |
#include <linux/mii.h> |
| 19 |
#include <linux/ethtool.h> |
| 20 |
#include <linux/of.h> |
| 21 |
#include <linux/phy.h> |
| 22 |
#include <linux/netdevice.h> |
| 23 |
#include <linux/crc16.h> |
| 24 |
#include <linux/etherdevice.h> |
| 25 |
#include <linux/smscphy.h> |
| 26 |
|
| 27 |
/* Vendor-specific PHY Definitions */ |
| 28 |
/* EDPD NLP / crossover time configuration */ |
| 29 |
#define PHY_EDPD_CONFIG 16 |
| 30 |
#define PHY_EDPD_CONFIG_EXT_CROSSOVER_ 0x0001 |
| 31 |
|
| 32 |
/* Control/Status Indication Register */ |
| 33 |
#define SPECIAL_CTRL_STS 27 |
| 34 |
#define SPECIAL_CTRL_STS_OVRRD_AMDIX_ 0x8000 |
| 35 |
#define SPECIAL_CTRL_STS_AMDIX_ENABLE_ 0x4000 |
| 36 |
#define SPECIAL_CTRL_STS_AMDIX_STATE_ 0x2000 |
| 37 |
|
| 38 |
#define EDPD_MAX_WAIT_DFLT_MS 640 |
| 39 |
/* interval between phylib state machine runs in ms */ |
| 40 |
#define PHY_STATE_MACH_MS 1000 |
| 41 |
|
| 42 |
struct smsc_hw_stat { |
| 43 |
const char *string; |
| 44 |
u8 reg; |
| 45 |
u8 bits; |
| 46 |
}; |
| 47 |
|
| 48 |
static struct smsc_hw_stat smsc_hw_stats[] = { |
| 49 |
{ "phy_symbol_errors", 26, 16}, |
| 50 |
}; |
| 51 |
|
| 52 |
struct smsc_phy_priv { |
| 53 |
unsigned int edpd_enable:1; |
| 54 |
unsigned int edpd_mode_set_by_user:1; |
| 55 |
unsigned int edpd_max_wait_ms; |
| 56 |
bool wol_arp; |
| 57 |
}; |
| 58 |
|
| 59 |
static int smsc_phy_ack_interrupt(struct phy_device *phydev) |
| 60 |
{ |
| 61 |
int rc = phy_read(phydev, MII_LAN83C185_ISF); |
| 62 |
|
| 63 |
return rc < 0 ? rc : 0; |
| 64 |
} |
| 65 |
|
| 66 |
int smsc_phy_config_intr(struct phy_device *phydev) |
| 67 |
{ |
| 68 |
int rc; |
| 69 |
|
| 70 |
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { |
| 71 |
rc = smsc_phy_ack_interrupt(phydev); |
| 72 |
if (rc) |
| 73 |
return rc; |
| 74 |
|
| 75 |
rc = phy_write(phydev, MII_LAN83C185_IM, |
| 76 |
MII_LAN83C185_ISF_INT_PHYLIB_EVENTS); |
| 77 |
} else { |
| 78 |
rc = phy_write(phydev, MII_LAN83C185_IM, 0); |
| 79 |
if (rc) |
| 80 |
return rc; |
| 81 |
|
| 82 |
rc = smsc_phy_ack_interrupt(phydev); |
| 83 |
} |
| 84 |
|
| 85 |
return rc < 0 ? rc : 0; |
| 86 |
} |
| 87 |
EXPORT_SYMBOL_GPL(smsc_phy_config_intr); |
| 88 |
|
| 89 |
static int smsc_phy_config_edpd(struct phy_device *phydev) |
| 90 |
{ |
| 91 |
struct smsc_phy_priv *priv = phydev->priv; |
| 92 |
|
| 93 |
if (priv->edpd_enable) |
| 94 |
return phy_set_bits(phydev, MII_LAN83C185_CTRL_STATUS, |
| 95 |
MII_LAN83C185_EDPWRDOWN); |
| 96 |
else |
| 97 |
return phy_clear_bits(phydev, MII_LAN83C185_CTRL_STATUS, |
| 98 |
MII_LAN83C185_EDPWRDOWN); |
| 99 |
} |
| 100 |
|
| 101 |
irqreturn_t smsc_phy_handle_interrupt(struct phy_device *phydev) |
| 102 |
{ |
| 103 |
int irq_status; |
| 104 |
|
| 105 |
irq_status = phy_read(phydev, MII_LAN83C185_ISF); |
| 106 |
if (irq_status < 0) { |
| 107 |
if (irq_status != -ENODEV) |
| 108 |
phy_error(phydev); |
| 109 |
|
| 110 |
return IRQ_NONE; |
| 111 |
} |
| 112 |
|
| 113 |
if (!(irq_status & MII_LAN83C185_ISF_INT_PHYLIB_EVENTS)) |
| 114 |
return IRQ_NONE; |
| 115 |
|
| 116 |
phy_trigger_machine(phydev); |
| 117 |
|
| 118 |
return IRQ_HANDLED; |
| 119 |
} |
| 120 |
EXPORT_SYMBOL_GPL(smsc_phy_handle_interrupt); |
| 121 |
|
| 122 |
int smsc_phy_config_init(struct phy_device *phydev) |
| 123 |
{ |
| 124 |
struct smsc_phy_priv *priv = phydev->priv; |
| 125 |
|
| 126 |
if (!priv) |
| 127 |
return 0; |
| 128 |
|
| 129 |
/* don't use EDPD in irq mode except overridden by user */ |
| 130 |
if (!priv->edpd_mode_set_by_user && phydev->irq != PHY_POLL) |
| 131 |
priv->edpd_enable = false; |
| 132 |
|
| 133 |
return smsc_phy_config_edpd(phydev); |
| 134 |
} |
| 135 |
EXPORT_SYMBOL_GPL(smsc_phy_config_init); |
| 136 |
|
| 137 |
static int smsc_phy_reset(struct phy_device *phydev) |
| 138 |
{ |
| 139 |
int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES); |
| 140 |
if (rc < 0) |
| 141 |
return rc; |
| 142 |
|
| 143 |
/* If the SMSC PHY is in power down mode, then set it |
| 144 |
* in all capable mode before using it. |
| 145 |
*/ |
| 146 |
if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) { |
| 147 |
/* set "all capable" mode */ |
| 148 |
rc |= MII_LAN83C185_MODE_ALL; |
| 149 |
phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc); |
| 150 |
} |
| 151 |
|
| 152 |
/* reset the phy */ |
| 153 |
return genphy_soft_reset(phydev); |
| 154 |
} |
| 155 |
|
| 156 |
static int lan87xx_config_aneg(struct phy_device *phydev) |
| 157 |
{ |
| 158 |
u8 mdix_ctrl; |
| 159 |
int val; |
| 160 |
int rc; |
| 161 |
|
| 162 |
/* When auto-negotiation is disabled (forced mode), the PHY's |
| 163 |
* Auto-MDIX will continue toggling the TX/RX pairs. |
| 164 |
* |
| 165 |
* To establish a stable link, we must select a fixed MDI mode. |
| 166 |
* If the user has not specified a fixed MDI mode (i.e., mdix_ctrl is |
| 167 |
* 'auto'), we default to ETH_TP_MDI. This choice of a ETH_TP_MDI mode |
| 168 |
* mirrors the behavior the hardware would exhibit if the AUTOMDIX_EN |
| 169 |
* strap were configured for a fixed MDI connection. |
| 170 |
*/ |
| 171 |
if (phydev->autoneg == AUTONEG_DISABLE) { |
| 172 |
if (phydev->mdix_ctrl == ETH_TP_MDI_AUTO) |
| 173 |
mdix_ctrl = ETH_TP_MDI; |
| 174 |
else |
| 175 |
mdix_ctrl = phydev->mdix_ctrl; |
| 176 |
} else { |
| 177 |
mdix_ctrl = phydev->mdix_ctrl; |
| 178 |
} |
| 179 |
|
| 180 |
switch (mdix_ctrl) { |
| 181 |
case ETH_TP_MDI: |
| 182 |
val = SPECIAL_CTRL_STS_OVRRD_AMDIX_; |
| 183 |
break; |
| 184 |
case ETH_TP_MDI_X: |
| 185 |
val = SPECIAL_CTRL_STS_OVRRD_AMDIX_ | |
| 186 |
SPECIAL_CTRL_STS_AMDIX_STATE_; |
| 187 |
break; |
| 188 |
case ETH_TP_MDI_AUTO: |
| 189 |
val = SPECIAL_CTRL_STS_OVRRD_AMDIX_ | |
| 190 |
SPECIAL_CTRL_STS_AMDIX_ENABLE_; |
| 191 |
break; |
| 192 |
default: |
| 193 |
return genphy_config_aneg(phydev); |
| 194 |
} |
| 195 |
|
| 196 |
rc = phy_read(phydev, SPECIAL_CTRL_STS); |
| 197 |
if (rc < 0) |
| 198 |
return rc; |
| 199 |
|
| 200 |
rc &= ~(SPECIAL_CTRL_STS_OVRRD_AMDIX_ | |
| 201 |
SPECIAL_CTRL_STS_AMDIX_ENABLE_ | |
| 202 |
SPECIAL_CTRL_STS_AMDIX_STATE_); |
| 203 |
rc |= val; |
| 204 |
phy_write(phydev, SPECIAL_CTRL_STS, rc); |
| 205 |
|
| 206 |
phydev->mdix = mdix_ctrl; |
| 207 |
return genphy_config_aneg(phydev); |
| 208 |
} |
| 209 |
|
| 210 |
static int lan95xx_config_aneg_ext(struct phy_device *phydev) |
| 211 |
{ |
| 212 |
if (phydev->phy_id == 0x0007c0f0) { /* LAN9500A or LAN9505A */ |
| 213 |
/* Extend Manual AutoMDIX timer */ |
| 214 |
int rc = phy_set_bits(phydev, PHY_EDPD_CONFIG, |
| 215 |
PHY_EDPD_CONFIG_EXT_CROSSOVER_); |
| 216 |
|
| 217 |
if (rc < 0) |
| 218 |
return rc; |
| 219 |
} |
| 220 |
|
| 221 |
return lan87xx_config_aneg(phydev); |
| 222 |
} |
| 223 |
|
| 224 |
/* |
| 225 |
* The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable |
| 226 |
* plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to |
| 227 |
* unstable detection of plugging in Ethernet cable. |
| 228 |
* This workaround disables Energy Detect Power-Down mode and waiting for |
| 229 |
* response on link pulses to detect presence of plugged Ethernet cable. |
| 230 |
* The Energy Detect Power-Down mode is enabled again in the end of procedure to |
| 231 |
* save approximately 220 mW of power if cable is unplugged. |
| 232 |
* The workaround is only applicable to poll mode. Energy Detect Power-Down may |
| 233 |
* not be used in interrupt mode lest link change detection becomes unreliable. |
| 234 |
*/ |
| 235 |
int lan87xx_read_status(struct phy_device *phydev) |
| 236 |
{ |
| 237 |
struct smsc_phy_priv *priv = phydev->priv; |
| 238 |
int err; |
| 239 |
|
| 240 |
err = genphy_read_status(phydev); |
| 241 |
if (err) |
| 242 |
return err; |
| 243 |
|
| 244 |
if (!phydev->link && priv && priv->edpd_enable && |
| 245 |
priv->edpd_max_wait_ms) { |
| 246 |
unsigned int max_wait = priv->edpd_max_wait_ms * 1000; |
| 247 |
int rc; |
| 248 |
|
| 249 |
/* Disable EDPD to wake up PHY */ |
| 250 |
rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); |
| 251 |
if (rc < 0) |
| 252 |
return rc; |
| 253 |
|
| 254 |
rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, |
| 255 |
rc & ~MII_LAN83C185_EDPWRDOWN); |
| 256 |
if (rc < 0) |
| 257 |
return rc; |
| 258 |
|
| 259 |
/* Wait max 640 ms to detect energy and the timeout is not |
| 260 |
* an actual error. |
| 261 |
*/ |
| 262 |
read_poll_timeout(phy_read, rc, |
| 263 |
rc & MII_LAN83C185_ENERGYON || rc < 0, |
| 264 |
10000, max_wait, true, phydev, |
| 265 |
MII_LAN83C185_CTRL_STATUS); |
| 266 |
if (rc < 0) |
| 267 |
return rc; |
| 268 |
|
| 269 |
/* Re-enable EDPD */ |
| 270 |
rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); |
| 271 |
if (rc < 0) |
| 272 |
return rc; |
| 273 |
|
| 274 |
rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, |
| 275 |
rc | MII_LAN83C185_EDPWRDOWN); |
| 276 |
if (rc < 0) |
| 277 |
return rc; |
| 278 |
} |
| 279 |
|
| 280 |
return err; |
| 281 |
} |
| 282 |
EXPORT_SYMBOL_GPL(lan87xx_read_status); |
| 283 |
|
| 284 |
static int lan87xx_phy_config_init(struct phy_device *phydev) |
| 285 |
{ |
| 286 |
int rc; |
| 287 |
|
| 288 |
/* The LAN87xx PHY's initial MDI-X mode is determined by the AUTOMDIX_EN |
| 289 |
* hardware strap, but the driver cannot read the strap's status. This |
| 290 |
* creates an unpredictable initial state. |
| 291 |
* |
| 292 |
* To ensure consistent and reliable behavior across all boards, |
| 293 |
* override the strap configuration on initialization and force the PHY |
| 294 |
* into a known state with Auto-MDIX enabled, which is the expected |
| 295 |
* default for modern hardware. |
| 296 |
*/ |
| 297 |
rc = phy_modify(phydev, SPECIAL_CTRL_STS, |
| 298 |
SPECIAL_CTRL_STS_OVRRD_AMDIX_ | |
| 299 |
SPECIAL_CTRL_STS_AMDIX_ENABLE_ | |
| 300 |
SPECIAL_CTRL_STS_AMDIX_STATE_, |
| 301 |
SPECIAL_CTRL_STS_OVRRD_AMDIX_ | |
| 302 |
SPECIAL_CTRL_STS_AMDIX_ENABLE_); |
| 303 |
if (rc < 0) |
| 304 |
return rc; |
| 305 |
|
| 306 |
phydev->mdix_ctrl = ETH_TP_MDI_AUTO; |
| 307 |
|
| 308 |
return smsc_phy_config_init(phydev); |
| 309 |
} |
| 310 |
|
| 311 |
static int lan874x_phy_config_init(struct phy_device *phydev) |
| 312 |
{ |
| 313 |
u16 val; |
| 314 |
int rc; |
| 315 |
|
| 316 |
/* Setup LED2/nINT/nPME pin to function as nPME. May need user option |
| 317 |
* to use LED1/nINT/nPME. |
| 318 |
*/ |
| 319 |
val = MII_LAN874X_PHY_PME2_SET; |
| 320 |
|
| 321 |
/* The bits MII_LAN874X_PHY_WOL_PFDA_FR, MII_LAN874X_PHY_WOL_WUFR, |
| 322 |
* MII_LAN874X_PHY_WOL_MPR, and MII_LAN874X_PHY_WOL_BCAST_FR need to |
| 323 |
* be cleared to de-assert PME signal after a WoL event happens, but |
| 324 |
* using PME auto clear gets around that. |
| 325 |
*/ |
| 326 |
val |= MII_LAN874X_PHY_PME_SELF_CLEAR; |
| 327 |
rc = phy_write_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_WOL_WUCSR, |
| 328 |
val); |
| 329 |
if (rc < 0) |
| 330 |
return rc; |
| 331 |
|
| 332 |
/* set nPME self clear delay time */ |
| 333 |
rc = phy_write_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_MCFGR, |
| 334 |
MII_LAN874X_PHY_PME_SELF_CLEAR_DELAY); |
| 335 |
if (rc < 0) |
| 336 |
return rc; |
| 337 |
|
| 338 |
return smsc_phy_config_init(phydev); |
| 339 |
} |
| 340 |
|
| 341 |
static void lan874x_get_wol(struct phy_device *phydev, |
| 342 |
struct ethtool_wolinfo *wol) |
| 343 |
{ |
| 344 |
struct smsc_phy_priv *priv = phydev->priv; |
| 345 |
int rc; |
| 346 |
|
| 347 |
wol->supported = (WAKE_UCAST | WAKE_BCAST | WAKE_MAGIC | |
| 348 |
WAKE_ARP | WAKE_MCAST); |
| 349 |
wol->wolopts = 0; |
| 350 |
|
| 351 |
rc = phy_read_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_WOL_WUCSR); |
| 352 |
if (rc < 0) |
| 353 |
return; |
| 354 |
|
| 355 |
if (rc & MII_LAN874X_PHY_WOL_PFDAEN) |
| 356 |
wol->wolopts |= WAKE_UCAST; |
| 357 |
|
| 358 |
if (rc & MII_LAN874X_PHY_WOL_BCSTEN) |
| 359 |
wol->wolopts |= WAKE_BCAST; |
| 360 |
|
| 361 |
if (rc & MII_LAN874X_PHY_WOL_MPEN) |
| 362 |
wol->wolopts |= WAKE_MAGIC; |
| 363 |
|
| 364 |
if (rc & MII_LAN874X_PHY_WOL_WUEN) { |
| 365 |
if (priv->wol_arp) |
| 366 |
wol->wolopts |= WAKE_ARP; |
| 367 |
else |
| 368 |
wol->wolopts |= WAKE_MCAST; |
| 369 |
} |
| 370 |
} |
| 371 |
|
| 372 |
static u16 smsc_crc16(const u8 *buffer, size_t len) |
| 373 |
{ |
| 374 |
return bitrev16(crc16(0xFFFF, buffer, len)); |
| 375 |
} |
| 376 |
|
| 377 |
static int lan874x_chk_wol_pattern(const u8 pattern[], const u16 *mask, |
| 378 |
u8 len, u8 *data, u8 *datalen) |
| 379 |
{ |
| 380 |
size_t i, j, k; |
| 381 |
int ret = 0; |
| 382 |
u16 bits; |
| 383 |
|
| 384 |
/* Pattern filtering can match up to 128 bytes of frame data. There |
| 385 |
* are 8 registers to program the 16-bit masks, where each bit means |
| 386 |
* the byte will be compared. The frame data will then go through a |
| 387 |
* CRC16 calculation for hardware comparison. This helper function |
| 388 |
* makes sure only relevant frame data are included in this |
| 389 |
* calculation. It provides a warning when the masks and expected |
| 390 |
* data size do not match. |
| 391 |
*/ |
| 392 |
i = 0; |
| 393 |
k = 0; |
| 394 |
while (len > 0) { |
| 395 |
bits = *mask; |
| 396 |
for (j = 0; j < 16; j++, i++, len--) { |
| 397 |
/* No more pattern. */ |
| 398 |
if (!len) { |
| 399 |
/* The rest of bitmap is not empty. */ |
| 400 |
if (bits) |
| 401 |
ret = i + 1; |
| 402 |
break; |
| 403 |
} |
| 404 |
if (bits & 1) |
| 405 |
data[k++] = pattern[i]; |
| 406 |
bits >>= 1; |
| 407 |
} |
| 408 |
mask++; |
| 409 |
} |
| 410 |
*datalen = k; |
| 411 |
return ret; |
| 412 |
} |
| 413 |
|
| 414 |
static int lan874x_set_wol_pattern(struct phy_device *phydev, u16 val, |
| 415 |
const u8 data[], u8 datalen, |
| 416 |
const u16 *mask, u8 masklen) |
| 417 |
{ |
| 418 |
u16 crc, reg; |
| 419 |
int rc; |
| 420 |
|
| 421 |
/* Starting pattern offset is set before calling this function. */ |
| 422 |
val |= MII_LAN874X_PHY_WOL_FILTER_EN; |
| 423 |
rc = phy_write_mmd(phydev, MDIO_MMD_PCS, |
| 424 |
MII_LAN874X_PHY_MMD_WOL_WUF_CFGA, val); |
| 425 |
if (rc < 0) |
| 426 |
return rc; |
| 427 |
|
| 428 |
crc = smsc_crc16(data, datalen); |
| 429 |
rc = phy_write_mmd(phydev, MDIO_MMD_PCS, |
| 430 |
MII_LAN874X_PHY_MMD_WOL_WUF_CFGB, crc); |
| 431 |
if (rc < 0) |
| 432 |
return rc; |
| 433 |
|
| 434 |
masklen = (masklen + 15) & ~0xf; |
| 435 |
reg = MII_LAN874X_PHY_MMD_WOL_WUF_MASK7; |
| 436 |
while (masklen >= 16) { |
| 437 |
rc = phy_write_mmd(phydev, MDIO_MMD_PCS, reg, *mask); |
| 438 |
if (rc < 0) |
| 439 |
return rc; |
| 440 |
reg--; |
| 441 |
mask++; |
| 442 |
masklen -= 16; |
| 443 |
} |
| 444 |
|
| 445 |
/* Clear out the rest of mask registers. */ |
| 446 |
while (reg != MII_LAN874X_PHY_MMD_WOL_WUF_MASK0) { |
| 447 |
phy_write_mmd(phydev, MDIO_MMD_PCS, reg, 0); |
| 448 |
reg--; |
| 449 |
} |
| 450 |
return rc; |
| 451 |
} |
| 452 |
|
| 453 |
static int lan874x_set_wol(struct phy_device *phydev, |
| 454 |
struct ethtool_wolinfo *wol) |
| 455 |
{ |
| 456 |
struct net_device *ndev = phydev->attached_dev; |
| 457 |
struct smsc_phy_priv *priv = phydev->priv; |
| 458 |
u16 val, val_wucsr; |
| 459 |
u8 data[128]; |
| 460 |
u8 datalen; |
| 461 |
int rc; |
| 462 |
|
| 463 |
/* lan874x has only one WoL filter pattern */ |
| 464 |
if ((wol->wolopts & (WAKE_ARP | WAKE_MCAST)) == |
| 465 |
(WAKE_ARP | WAKE_MCAST)) { |
| 466 |
phydev_info(phydev, |
| 467 |
"lan874x WoL supports one of ARP|MCAST at a time\n"); |
| 468 |
return -EOPNOTSUPP; |
| 469 |
} |
| 470 |
|
| 471 |
rc = phy_read_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_WOL_WUCSR); |
| 472 |
if (rc < 0) |
| 473 |
return rc; |
| 474 |
|
| 475 |
val_wucsr = rc; |
| 476 |
|
| 477 |
if (wol->wolopts & WAKE_UCAST) |
| 478 |
val_wucsr |= MII_LAN874X_PHY_WOL_PFDAEN; |
| 479 |
else |
| 480 |
val_wucsr &= ~MII_LAN874X_PHY_WOL_PFDAEN; |
| 481 |
|
| 482 |
if (wol->wolopts & WAKE_BCAST) |
| 483 |
val_wucsr |= MII_LAN874X_PHY_WOL_BCSTEN; |
| 484 |
else |
| 485 |
val_wucsr &= ~MII_LAN874X_PHY_WOL_BCSTEN; |
| 486 |
|
| 487 |
if (wol->wolopts & WAKE_MAGIC) |
| 488 |
val_wucsr |= MII_LAN874X_PHY_WOL_MPEN; |
| 489 |
else |
| 490 |
val_wucsr &= ~MII_LAN874X_PHY_WOL_MPEN; |
| 491 |
|
| 492 |
/* Need to use pattern matching */ |
| 493 |
if (wol->wolopts & (WAKE_ARP | WAKE_MCAST)) |
| 494 |
val_wucsr |= MII_LAN874X_PHY_WOL_WUEN; |
| 495 |
else |
| 496 |
val_wucsr &= ~MII_LAN874X_PHY_WOL_WUEN; |
| 497 |
|
| 498 |
if (wol->wolopts & WAKE_ARP) { |
| 499 |
const u8 pattern[2] = { 0x08, 0x06 }; |
| 500 |
const u16 mask[1] = { 0x0003 }; |
| 501 |
|
| 502 |
rc = lan874x_chk_wol_pattern(pattern, mask, 2, data, |
| 503 |
&datalen); |
| 504 |
if (rc) |
| 505 |
phydev_dbg(phydev, "pattern not valid at %d\n", rc); |
| 506 |
|
| 507 |
/* Need to match broadcast destination address and provided |
| 508 |
* data pattern at offset 12. |
| 509 |
*/ |
| 510 |
val = 12 | MII_LAN874X_PHY_WOL_FILTER_BCSTEN; |
| 511 |
rc = lan874x_set_wol_pattern(phydev, val, data, datalen, mask, |
| 512 |
2); |
| 513 |
if (rc < 0) |
| 514 |
return rc; |
| 515 |
priv->wol_arp = true; |
| 516 |
} |
| 517 |
|
| 518 |
if (wol->wolopts & WAKE_MCAST) { |
| 519 |
/* Need to match multicast destination address. */ |
| 520 |
val = MII_LAN874X_PHY_WOL_FILTER_MCASTTEN; |
| 521 |
rc = lan874x_set_wol_pattern(phydev, val, data, 0, NULL, 0); |
| 522 |
if (rc < 0) |
| 523 |
return rc; |
| 524 |
priv->wol_arp = false; |
| 525 |
} |
| 526 |
|
| 527 |
if (wol->wolopts & (WAKE_MAGIC | WAKE_UCAST)) { |
| 528 |
const u8 *mac = (const u8 *)ndev->dev_addr; |
| 529 |
int i, reg; |
| 530 |
|
| 531 |
reg = MII_LAN874X_PHY_MMD_WOL_RX_ADDRC; |
| 532 |
for (i = 0; i < 6; i += 2, reg--) { |
| 533 |
rc = phy_write_mmd(phydev, MDIO_MMD_PCS, reg, |
| 534 |
((mac[i + 1] << 8) | mac[i])); |
| 535 |
if (rc < 0) |
| 536 |
return rc; |
| 537 |
} |
| 538 |
} |
| 539 |
|
| 540 |
rc = phy_write_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_WOL_WUCSR, |
| 541 |
val_wucsr); |
| 542 |
if (rc < 0) |
| 543 |
return rc; |
| 544 |
|
| 545 |
return 0; |
| 546 |
} |
| 547 |
|
| 548 |
static int smsc_get_sset_count(struct phy_device *phydev) |
| 549 |
{ |
| 550 |
return ARRAY_SIZE(smsc_hw_stats); |
| 551 |
} |
| 552 |
|
| 553 |
static void smsc_get_strings(struct phy_device *phydev, u8 *data) |
| 554 |
{ |
| 555 |
int i; |
| 556 |
|
| 557 |
for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) |
| 558 |
ethtool_puts(&data, smsc_hw_stats[i].string); |
| 559 |
} |
| 560 |
|
| 561 |
static u64 smsc_get_stat(struct phy_device *phydev, int i) |
| 562 |
{ |
| 563 |
struct smsc_hw_stat stat = smsc_hw_stats[i]; |
| 564 |
int val; |
| 565 |
u64 ret; |
| 566 |
|
| 567 |
val = phy_read(phydev, stat.reg); |
| 568 |
if (val < 0) |
| 569 |
ret = U64_MAX; |
| 570 |
else |
| 571 |
ret = val; |
| 572 |
|
| 573 |
return ret; |
| 574 |
} |
| 575 |
|
| 576 |
static void smsc_get_stats(struct phy_device *phydev, |
| 577 |
struct ethtool_stats *stats, u64 *data) |
| 578 |
{ |
| 579 |
int i; |
| 580 |
|
| 581 |
for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) |
| 582 |
data[i] = smsc_get_stat(phydev, i); |
| 583 |
} |
| 584 |
|
| 585 |
static int smsc_phy_get_edpd(struct phy_device *phydev, u16 *edpd) |
| 586 |
{ |
| 587 |
struct smsc_phy_priv *priv = phydev->priv; |
| 588 |
|
| 589 |
if (!priv) |
| 590 |
return -EOPNOTSUPP; |
| 591 |
|
| 592 |
if (!priv->edpd_enable) |
| 593 |
*edpd = ETHTOOL_PHY_EDPD_DISABLE; |
| 594 |
else if (!priv->edpd_max_wait_ms) |
| 595 |
*edpd = ETHTOOL_PHY_EDPD_NO_TX; |
| 596 |
else |
| 597 |
*edpd = PHY_STATE_MACH_MS + priv->edpd_max_wait_ms; |
| 598 |
|
| 599 |
return 0; |
| 600 |
} |
| 601 |
|
| 602 |
static int smsc_phy_set_edpd(struct phy_device *phydev, u16 edpd) |
| 603 |
{ |
| 604 |
struct smsc_phy_priv *priv = phydev->priv; |
| 605 |
|
| 606 |
if (!priv) |
| 607 |
return -EOPNOTSUPP; |
| 608 |
|
| 609 |
switch (edpd) { |
| 610 |
case ETHTOOL_PHY_EDPD_DISABLE: |
| 611 |
priv->edpd_enable = false; |
| 612 |
break; |
| 613 |
case ETHTOOL_PHY_EDPD_NO_TX: |
| 614 |
priv->edpd_enable = true; |
| 615 |
priv->edpd_max_wait_ms = 0; |
| 616 |
break; |
| 617 |
case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS: |
| 618 |
edpd = PHY_STATE_MACH_MS + EDPD_MAX_WAIT_DFLT_MS; |
| 619 |
fallthrough; |
| 620 |
default: |
| 621 |
if (phydev->irq != PHY_POLL) |
| 622 |
return -EOPNOTSUPP; |
| 623 |
if (edpd < PHY_STATE_MACH_MS || edpd > PHY_STATE_MACH_MS + 1000) |
| 624 |
return -EINVAL; |
| 625 |
priv->edpd_enable = true; |
| 626 |
priv->edpd_max_wait_ms = edpd - PHY_STATE_MACH_MS; |
| 627 |
} |
| 628 |
|
| 629 |
priv->edpd_mode_set_by_user = true; |
| 630 |
|
| 631 |
return smsc_phy_config_edpd(phydev); |
| 632 |
} |
| 633 |
|
| 634 |
int smsc_phy_get_tunable(struct phy_device *phydev, |
| 635 |
struct ethtool_tunable *tuna, void *data) |
| 636 |
{ |
| 637 |
switch (tuna->id) { |
| 638 |
case ETHTOOL_PHY_EDPD: |
| 639 |
return smsc_phy_get_edpd(phydev, data); |
| 640 |
default: |
| 641 |
return -EOPNOTSUPP; |
| 642 |
} |
| 643 |
} |
| 644 |
EXPORT_SYMBOL_GPL(smsc_phy_get_tunable); |
| 645 |
|
| 646 |
int smsc_phy_set_tunable(struct phy_device *phydev, |
| 647 |
struct ethtool_tunable *tuna, const void *data) |
| 648 |
{ |
| 649 |
switch (tuna->id) { |
| 650 |
case ETHTOOL_PHY_EDPD: |
| 651 |
return smsc_phy_set_edpd(phydev, *(u16 *)data); |
| 652 |
default: |
| 653 |
return -EOPNOTSUPP; |
| 654 |
} |
| 655 |
} |
| 656 |
EXPORT_SYMBOL_GPL(smsc_phy_set_tunable); |
| 657 |
|
| 658 |
int smsc_phy_probe(struct phy_device *phydev) |
| 659 |
{ |
| 660 |
struct device *dev = &phydev->mdio.dev; |
| 661 |
struct smsc_phy_priv *priv; |
| 662 |
struct clk *refclk; |
| 663 |
|
| 664 |
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| 665 |
if (!priv) |
| 666 |
return -ENOMEM; |
| 667 |
|
| 668 |
priv->edpd_enable = true; |
| 669 |
priv->edpd_max_wait_ms = EDPD_MAX_WAIT_DFLT_MS; |
| 670 |
|
| 671 |
if (device_property_present(dev, "smsc,disable-energy-detect")) |
| 672 |
priv->edpd_enable = false; |
| 673 |
|
| 674 |
phydev->priv = priv; |
| 675 |
|
| 676 |
/* Make clk optional to keep DTB backward compatibility. */ |
| 677 |
refclk = devm_clk_get_optional_enabled_with_rate(dev, NULL, |
| 678 |
50 * 1000 * 1000); |
| 679 |
if (IS_ERR(refclk)) |
| 680 |
return dev_err_probe(dev, PTR_ERR(refclk), |
| 681 |
"Failed to request clock\n"); |
| 682 |
|
| 683 |
return 0; |
| 684 |
} |
| 685 |
EXPORT_SYMBOL_GPL(smsc_phy_probe); |
| 686 |
|
| 687 |
static struct phy_driver smsc_phy_driver[] = { |
| 688 |
{ |
| 689 |
.phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */ |
| 690 |
.phy_id_mask = 0xfffffff0, |
| 691 |
.name = "SMSC LAN83C185", |
| 692 |
|
| 693 |
/* PHY_BASIC_FEATURES */ |
| 694 |
|
| 695 |
.probe = smsc_phy_probe, |
| 696 |
|
| 697 |
/* basic functions */ |
| 698 |
.config_init = smsc_phy_config_init, |
| 699 |
.soft_reset = smsc_phy_reset, |
| 700 |
|
| 701 |
/* IRQ related */ |
| 702 |
.config_intr = smsc_phy_config_intr, |
| 703 |
.handle_interrupt = smsc_phy_handle_interrupt, |
| 704 |
|
| 705 |
.suspend = genphy_suspend, |
| 706 |
.resume = genphy_resume, |
| 707 |
}, { |
| 708 |
.phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */ |
| 709 |
.phy_id_mask = 0xfffffff0, |
| 710 |
.name = "SMSC LAN8187", |
| 711 |
|
| 712 |
/* PHY_BASIC_FEATURES */ |
| 713 |
|
| 714 |
.probe = smsc_phy_probe, |
| 715 |
|
| 716 |
/* basic functions */ |
| 717 |
.config_init = smsc_phy_config_init, |
| 718 |
.soft_reset = smsc_phy_reset, |
| 719 |
|
| 720 |
/* IRQ related */ |
| 721 |
.config_intr = smsc_phy_config_intr, |
| 722 |
.handle_interrupt = smsc_phy_handle_interrupt, |
| 723 |
|
| 724 |
/* Statistics */ |
| 725 |
.get_sset_count = smsc_get_sset_count, |
| 726 |
.get_strings = smsc_get_strings, |
| 727 |
.get_stats = smsc_get_stats, |
| 728 |
|
| 729 |
.suspend = genphy_suspend, |
| 730 |
.resume = genphy_resume, |
| 731 |
}, { |
| 732 |
/* This covers internal PHY (phy_id: 0x0007C0C3) for |
| 733 |
* LAN9500 (PID: 0x9500), LAN9514 (PID: 0xec00), LAN9505 (PID: 0x9505) |
| 734 |
*/ |
| 735 |
.phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */ |
| 736 |
.phy_id_mask = 0xfffffff0, |
| 737 |
.name = "SMSC LAN8700", |
| 738 |
|
| 739 |
/* PHY_BASIC_FEATURES */ |
| 740 |
|
| 741 |
.probe = smsc_phy_probe, |
| 742 |
|
| 743 |
/* basic functions */ |
| 744 |
.read_status = lan87xx_read_status, |
| 745 |
.config_init = lan87xx_phy_config_init, |
| 746 |
.soft_reset = smsc_phy_reset, |
| 747 |
.config_aneg = lan87xx_config_aneg, |
| 748 |
|
| 749 |
/* IRQ related */ |
| 750 |
.config_intr = smsc_phy_config_intr, |
| 751 |
.handle_interrupt = smsc_phy_handle_interrupt, |
| 752 |
|
| 753 |
/* Statistics */ |
| 754 |
.get_sset_count = smsc_get_sset_count, |
| 755 |
.get_strings = smsc_get_strings, |
| 756 |
.get_stats = smsc_get_stats, |
| 757 |
|
| 758 |
.get_tunable = smsc_phy_get_tunable, |
| 759 |
.set_tunable = smsc_phy_set_tunable, |
| 760 |
|
| 761 |
.suspend = genphy_suspend, |
| 762 |
.resume = genphy_resume, |
| 763 |
}, { |
| 764 |
.phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */ |
| 765 |
.phy_id_mask = 0xfffffff0, |
| 766 |
.name = "SMSC LAN911x Internal PHY", |
| 767 |
|
| 768 |
/* PHY_BASIC_FEATURES */ |
| 769 |
|
| 770 |
.probe = smsc_phy_probe, |
| 771 |
|
| 772 |
/* IRQ related */ |
| 773 |
.config_intr = smsc_phy_config_intr, |
| 774 |
.handle_interrupt = smsc_phy_handle_interrupt, |
| 775 |
|
| 776 |
.suspend = genphy_suspend, |
| 777 |
.resume = genphy_resume, |
| 778 |
}, { |
| 779 |
/* This covers internal PHY (phy_id: 0x0007C0F0) for |
| 780 |
* LAN9500A (PID: 0x9E00), LAN9505A (PID: 0x9E01) |
| 781 |
*/ |
| 782 |
.phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */ |
| 783 |
.phy_id_mask = 0xfffffff0, |
| 784 |
.name = "SMSC LAN8710/LAN8720", |
| 785 |
|
| 786 |
/* PHY_BASIC_FEATURES */ |
| 787 |
|
| 788 |
.flags = PHY_RST_AFTER_CLK_EN, |
| 789 |
.probe = smsc_phy_probe, |
| 790 |
|
| 791 |
/* basic functions */ |
| 792 |
.read_status = lan87xx_read_status, |
| 793 |
.config_init = smsc_phy_config_init, |
| 794 |
.soft_reset = smsc_phy_reset, |
| 795 |
.config_aneg = lan95xx_config_aneg_ext, |
| 796 |
|
| 797 |
/* IRQ related */ |
| 798 |
.config_intr = smsc_phy_config_intr, |
| 799 |
.handle_interrupt = smsc_phy_handle_interrupt, |
| 800 |
|
| 801 |
/* Statistics */ |
| 802 |
.get_sset_count = smsc_get_sset_count, |
| 803 |
.get_strings = smsc_get_strings, |
| 804 |
.get_stats = smsc_get_stats, |
| 805 |
|
| 806 |
.get_tunable = smsc_phy_get_tunable, |
| 807 |
.set_tunable = smsc_phy_set_tunable, |
| 808 |
|
| 809 |
.suspend = genphy_suspend, |
| 810 |
.resume = genphy_resume, |
| 811 |
}, { |
| 812 |
.phy_id = 0x0007c110, |
| 813 |
.phy_id_mask = 0xfffffff0, |
| 814 |
.name = "SMSC LAN8740", |
| 815 |
|
| 816 |
/* PHY_BASIC_FEATURES */ |
| 817 |
.flags = PHY_RST_AFTER_CLK_EN, |
| 818 |
|
| 819 |
.probe = smsc_phy_probe, |
| 820 |
|
| 821 |
/* basic functions */ |
| 822 |
.read_status = lan87xx_read_status, |
| 823 |
.config_init = lan874x_phy_config_init, |
| 824 |
.soft_reset = smsc_phy_reset, |
| 825 |
|
| 826 |
/* IRQ related */ |
| 827 |
.config_intr = smsc_phy_config_intr, |
| 828 |
.handle_interrupt = smsc_phy_handle_interrupt, |
| 829 |
|
| 830 |
/* Statistics */ |
| 831 |
.get_sset_count = smsc_get_sset_count, |
| 832 |
.get_strings = smsc_get_strings, |
| 833 |
.get_stats = smsc_get_stats, |
| 834 |
|
| 835 |
.get_tunable = smsc_phy_get_tunable, |
| 836 |
.set_tunable = smsc_phy_set_tunable, |
| 837 |
|
| 838 |
/* WoL */ |
| 839 |
.set_wol = lan874x_set_wol, |
| 840 |
.get_wol = lan874x_get_wol, |
| 841 |
|
| 842 |
.suspend = genphy_suspend, |
| 843 |
.resume = genphy_resume, |
| 844 |
}, { |
| 845 |
.phy_id = 0x0007c130, /* 0x0007c130 and 0x0007c131 */ |
| 846 |
/* This mask (0xfffffff2) is to differentiate from |
| 847 |
* LAN88xx (phy_id 0x0007c132) |
| 848 |
* and allows future phy_id revisions. |
| 849 |
*/ |
| 850 |
.phy_id_mask = 0xfffffff2, |
| 851 |
.name = "Microchip LAN8742", |
| 852 |
|
| 853 |
/* PHY_BASIC_FEATURES */ |
| 854 |
.flags = PHY_RST_AFTER_CLK_EN, |
| 855 |
|
| 856 |
.probe = smsc_phy_probe, |
| 857 |
|
| 858 |
/* basic functions */ |
| 859 |
.read_status = lan87xx_read_status, |
| 860 |
.config_init = lan874x_phy_config_init, |
| 861 |
.soft_reset = smsc_phy_reset, |
| 862 |
|
| 863 |
/* IRQ related */ |
| 864 |
.config_intr = smsc_phy_config_intr, |
| 865 |
.handle_interrupt = smsc_phy_handle_interrupt, |
| 866 |
|
| 867 |
/* Statistics */ |
| 868 |
.get_sset_count = smsc_get_sset_count, |
| 869 |
.get_strings = smsc_get_strings, |
| 870 |
.get_stats = smsc_get_stats, |
| 871 |
|
| 872 |
.get_tunable = smsc_phy_get_tunable, |
| 873 |
.set_tunable = smsc_phy_set_tunable, |
| 874 |
|
| 875 |
/* WoL */ |
| 876 |
.set_wol = lan874x_set_wol, |
| 877 |
.get_wol = lan874x_get_wol, |
| 878 |
|
| 879 |
.suspend = genphy_suspend, |
| 880 |
.resume = genphy_resume, |
| 881 |
} }; |
| 882 |
|
| 883 |
module_phy_driver(smsc_phy_driver); |
| 884 |
|
| 885 |
MODULE_DESCRIPTION("SMSC PHY driver"); |
| 886 |
MODULE_AUTHOR("Herbert Valerio Riedel"); |
| 887 |
MODULE_LICENSE("GPL"); |
| 888 |
|
| 889 |
static const struct mdio_device_id __maybe_unused smsc_tbl[] = { |
| 890 |
{ 0x0007c0a0, 0xfffffff0 }, |
| 891 |
{ 0x0007c0b0, 0xfffffff0 }, |
| 892 |
{ 0x0007c0c0, 0xfffffff0 }, |
| 893 |
{ 0x0007c0d0, 0xfffffff0 }, |
| 894 |
{ 0x0007c0f0, 0xfffffff0 }, |
| 895 |
{ 0x0007c110, 0xfffffff0 }, |
| 896 |
{ 0x0007c130, 0xfffffff2 }, |
| 897 |
{ } |
| 898 |
}; |
| 899 |
|
| 900 |
MODULE_DEVICE_TABLE(mdio, smsc_tbl); |