| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* Framework for configuring and reading PHY devices |
| 3 |
* Based on code in sungem_phy.c and gianfar_phy.c |
| 4 |
* |
| 5 |
* Author: Andy Fleming |
| 6 |
* |
| 7 |
* Copyright (c) 2004 Freescale Semiconductor, Inc. |
| 8 |
* Copyright (c) 2006, 2007 Maciej W. Rozycki |
| 9 |
*/ |
| 10 |
|
| 11 |
#include <linux/kernel.h> |
| 12 |
#include <linux/string.h> |
| 13 |
#include <linux/errno.h> |
| 14 |
#include <linux/unistd.h> |
| 15 |
#include <linux/interrupt.h> |
| 16 |
#include <linux/delay.h> |
| 17 |
#include <linux/netdevice.h> |
| 18 |
#include <linux/netlink.h> |
| 19 |
#include <linux/etherdevice.h> |
| 20 |
#include <linux/skbuff.h> |
| 21 |
#include <linux/mm.h> |
| 22 |
#include <linux/module.h> |
| 23 |
#include <linux/mii.h> |
| 24 |
#include <linux/ethtool.h> |
| 25 |
#include <linux/ethtool_netlink.h> |
| 26 |
#include <linux/phy.h> |
| 27 |
#include <linux/phy_led_triggers.h> |
| 28 |
#include <linux/sfp.h> |
| 29 |
#include <linux/workqueue.h> |
| 30 |
#include <linux/mdio.h> |
| 31 |
#include <linux/io.h> |
| 32 |
#include <linux/uaccess.h> |
| 33 |
#include <linux/atomic.h> |
| 34 |
#include <linux/suspend.h> |
| 35 |
#include <net/netlink.h> |
| 36 |
#include <net/genetlink.h> |
| 37 |
#include <net/sock.h> |
| 38 |
|
| 39 |
#include "phylib-internal.h" |
| 40 |
#include "phy-caps.h" |
| 41 |
|
| 42 |
#define PHY_STATE_TIME HZ |
| 43 |
|
| 44 |
#define PHY_STATE_STR(_state) \ |
| 45 |
case PHY_##_state: \ |
| 46 |
return __stringify(_state); \ |
| 47 |
|
| 48 |
static const char *phy_state_to_str(enum phy_state st) |
| 49 |
{ |
| 50 |
switch (st) { |
| 51 |
PHY_STATE_STR(DOWN) |
| 52 |
PHY_STATE_STR(READY) |
| 53 |
PHY_STATE_STR(UP) |
| 54 |
PHY_STATE_STR(RUNNING) |
| 55 |
PHY_STATE_STR(NOLINK) |
| 56 |
PHY_STATE_STR(CABLETEST) |
| 57 |
PHY_STATE_STR(HALTED) |
| 58 |
PHY_STATE_STR(ERROR) |
| 59 |
} |
| 60 |
|
| 61 |
return NULL; |
| 62 |
} |
| 63 |
|
| 64 |
static void phy_process_state_change(struct phy_device *phydev, |
| 65 |
enum phy_state old_state) |
| 66 |
{ |
| 67 |
if (old_state != phydev->state) { |
| 68 |
phydev_dbg(phydev, "PHY state change %s -> %s\n", |
| 69 |
phy_state_to_str(old_state), |
| 70 |
phy_state_to_str(phydev->state)); |
| 71 |
if (phydev->drv && phydev->drv->link_change_notify) |
| 72 |
phydev->drv->link_change_notify(phydev); |
| 73 |
} |
| 74 |
} |
| 75 |
|
| 76 |
static void phy_link_up(struct phy_device *phydev) |
| 77 |
{ |
| 78 |
phydev->phy_link_change(phydev, true); |
| 79 |
phy_led_trigger_change_speed(phydev); |
| 80 |
} |
| 81 |
|
| 82 |
static void phy_link_down(struct phy_device *phydev) |
| 83 |
{ |
| 84 |
phydev->phy_link_change(phydev, false); |
| 85 |
phy_led_trigger_change_speed(phydev); |
| 86 |
WRITE_ONCE(phydev->link_down_events, phydev->link_down_events + 1); |
| 87 |
} |
| 88 |
|
| 89 |
static const char *phy_pause_str(struct phy_device *phydev) |
| 90 |
{ |
| 91 |
bool local_pause, local_asym_pause; |
| 92 |
|
| 93 |
if (phydev->autoneg == AUTONEG_DISABLE) |
| 94 |
goto no_pause; |
| 95 |
|
| 96 |
local_pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, |
| 97 |
phydev->advertising); |
| 98 |
local_asym_pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| 99 |
phydev->advertising); |
| 100 |
|
| 101 |
if (local_pause && phydev->pause) |
| 102 |
return "rx/tx"; |
| 103 |
|
| 104 |
if (local_asym_pause && phydev->asym_pause) { |
| 105 |
if (local_pause) |
| 106 |
return "rx"; |
| 107 |
if (phydev->pause) |
| 108 |
return "tx"; |
| 109 |
} |
| 110 |
|
| 111 |
no_pause: |
| 112 |
return "off"; |
| 113 |
} |
| 114 |
|
| 115 |
/** |
| 116 |
* phy_print_status - Convenience function to print out the current phy status |
| 117 |
* @phydev: the phy_device struct |
| 118 |
*/ |
| 119 |
void phy_print_status(struct phy_device *phydev) |
| 120 |
{ |
| 121 |
if (phydev->link) { |
| 122 |
netdev_info(phydev->attached_dev, |
| 123 |
"Link is Up - %s/%s %s- flow control %s\n", |
| 124 |
phy_speed_to_str(phydev->speed), |
| 125 |
phy_duplex_to_str(phydev->duplex), |
| 126 |
phydev->downshifted_rate ? "(downshifted) " : "", |
| 127 |
phy_pause_str(phydev)); |
| 128 |
} else { |
| 129 |
netdev_info(phydev->attached_dev, "Link is Down\n"); |
| 130 |
} |
| 131 |
} |
| 132 |
EXPORT_SYMBOL(phy_print_status); |
| 133 |
|
| 134 |
/** |
| 135 |
* phy_get_rate_matching - determine if rate matching is supported |
| 136 |
* @phydev: The phy device to return rate matching for |
| 137 |
* @iface: The interface mode to use |
| 138 |
* |
| 139 |
* This determines the type of rate matching (if any) that @phy supports |
| 140 |
* using @iface. @iface may be %PHY_INTERFACE_MODE_NA to determine if any |
| 141 |
* interface supports rate matching. |
| 142 |
* |
| 143 |
* Return: The type of rate matching @phy supports for @iface, or |
| 144 |
* %RATE_MATCH_NONE. |
| 145 |
*/ |
| 146 |
int phy_get_rate_matching(struct phy_device *phydev, |
| 147 |
phy_interface_t iface) |
| 148 |
{ |
| 149 |
int ret = RATE_MATCH_NONE; |
| 150 |
|
| 151 |
if (phydev->drv->get_rate_matching) { |
| 152 |
mutex_lock(&phydev->lock); |
| 153 |
ret = phydev->drv->get_rate_matching(phydev, iface); |
| 154 |
mutex_unlock(&phydev->lock); |
| 155 |
} |
| 156 |
|
| 157 |
return ret; |
| 158 |
} |
| 159 |
EXPORT_SYMBOL_GPL(phy_get_rate_matching); |
| 160 |
|
| 161 |
/** |
| 162 |
* phy_config_interrupt - configure the PHY device for the requested interrupts |
| 163 |
* @phydev: the phy_device struct |
| 164 |
* @interrupts: interrupt flags to configure for this @phydev |
| 165 |
* |
| 166 |
* Returns 0 on success or < 0 on error. |
| 167 |
*/ |
| 168 |
static int phy_config_interrupt(struct phy_device *phydev, bool interrupts) |
| 169 |
{ |
| 170 |
phydev->interrupts = interrupts ? 1 : 0; |
| 171 |
if (phydev->drv->config_intr) |
| 172 |
return phydev->drv->config_intr(phydev); |
| 173 |
|
| 174 |
return 0; |
| 175 |
} |
| 176 |
|
| 177 |
/** |
| 178 |
* phy_restart_aneg - restart auto-negotiation |
| 179 |
* @phydev: target phy_device struct |
| 180 |
* |
| 181 |
* Restart the autonegotiation on @phydev. Returns >= 0 on success or |
| 182 |
* negative errno on error. |
| 183 |
*/ |
| 184 |
int phy_restart_aneg(struct phy_device *phydev) |
| 185 |
{ |
| 186 |
int ret; |
| 187 |
|
| 188 |
if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0))) |
| 189 |
ret = genphy_c45_restart_aneg(phydev); |
| 190 |
else |
| 191 |
ret = genphy_restart_aneg(phydev); |
| 192 |
|
| 193 |
return ret; |
| 194 |
} |
| 195 |
EXPORT_SYMBOL_GPL(phy_restart_aneg); |
| 196 |
|
| 197 |
/** |
| 198 |
* phy_aneg_done - return auto-negotiation status |
| 199 |
* @phydev: target phy_device struct |
| 200 |
* |
| 201 |
* Description: Return the auto-negotiation status from this @phydev |
| 202 |
* Returns > 0 on success or < 0 on error. 0 means that auto-negotiation |
| 203 |
* is still pending. |
| 204 |
*/ |
| 205 |
int phy_aneg_done(struct phy_device *phydev) |
| 206 |
{ |
| 207 |
if (phydev->drv && phydev->drv->aneg_done) |
| 208 |
return phydev->drv->aneg_done(phydev); |
| 209 |
else if (phydev->is_c45) |
| 210 |
return genphy_c45_aneg_done(phydev); |
| 211 |
else |
| 212 |
return genphy_aneg_done(phydev); |
| 213 |
} |
| 214 |
EXPORT_SYMBOL(phy_aneg_done); |
| 215 |
|
| 216 |
/** |
| 217 |
* phy_supported_speeds - return all speeds currently supported by a phy device |
| 218 |
* @phy: The phy device to return supported speeds of. |
| 219 |
* @speeds: buffer to store supported speeds in. |
| 220 |
* @size: size of speeds buffer. |
| 221 |
* |
| 222 |
* Description: Returns the number of supported speeds, and fills the speeds |
| 223 |
* buffer with the supported speeds. If speeds buffer is too small to contain |
| 224 |
* all currently supported speeds, will return as many speeds as can fit. |
| 225 |
*/ |
| 226 |
unsigned int phy_supported_speeds(struct phy_device *phy, |
| 227 |
unsigned int *speeds, |
| 228 |
unsigned int size) |
| 229 |
{ |
| 230 |
return phy_caps_speeds(speeds, size, phy->supported); |
| 231 |
} |
| 232 |
|
| 233 |
/** |
| 234 |
* phy_check_valid - check if there is a valid PHY setting which matches |
| 235 |
* speed, duplex, and feature mask |
| 236 |
* @speed: speed to match |
| 237 |
* @duplex: duplex to match |
| 238 |
* @features: A mask of the valid settings |
| 239 |
* |
| 240 |
* Description: Returns true if there is a valid setting, false otherwise. |
| 241 |
*/ |
| 242 |
bool phy_check_valid(int speed, int duplex, unsigned long *features) |
| 243 |
{ |
| 244 |
return phy_caps_valid(speed, duplex, features); |
| 245 |
} |
| 246 |
EXPORT_SYMBOL(phy_check_valid); |
| 247 |
|
| 248 |
/** |
| 249 |
* phy_sanitize_settings - make sure the PHY is set to supported speed and duplex |
| 250 |
* @phydev: the target phy_device struct |
| 251 |
* |
| 252 |
* Description: Make sure the PHY is set to supported speeds and |
| 253 |
* duplexes. Drop down by one in this order: 1000/FULL, |
| 254 |
* 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF. |
| 255 |
*/ |
| 256 |
static void phy_sanitize_settings(struct phy_device *phydev) |
| 257 |
{ |
| 258 |
const struct link_capabilities *c; |
| 259 |
|
| 260 |
c = phy_caps_lookup(phydev->speed, phydev->duplex, phydev->supported, |
| 261 |
false); |
| 262 |
|
| 263 |
if (c) { |
| 264 |
phydev->speed = c->speed; |
| 265 |
phydev->duplex = c->duplex; |
| 266 |
} else { |
| 267 |
/* We failed to find anything (no supported speeds?) */ |
| 268 |
phydev->speed = SPEED_UNKNOWN; |
| 269 |
phydev->duplex = DUPLEX_UNKNOWN; |
| 270 |
} |
| 271 |
} |
| 272 |
|
| 273 |
void phy_ethtool_ksettings_get(struct phy_device *phydev, |
| 274 |
struct ethtool_link_ksettings *cmd) |
| 275 |
{ |
| 276 |
mutex_lock(&phydev->lock); |
| 277 |
linkmode_copy(cmd->link_modes.supported, phydev->supported); |
| 278 |
linkmode_copy(cmd->link_modes.advertising, phydev->advertising); |
| 279 |
linkmode_copy(cmd->link_modes.lp_advertising, phydev->lp_advertising); |
| 280 |
|
| 281 |
cmd->base.speed = phydev->speed; |
| 282 |
cmd->base.duplex = phydev->duplex; |
| 283 |
cmd->base.master_slave_cfg = phydev->master_slave_get; |
| 284 |
cmd->base.master_slave_state = phydev->master_slave_state; |
| 285 |
cmd->base.rate_matching = phydev->rate_matching; |
| 286 |
if (phydev->interface == PHY_INTERFACE_MODE_MOCA) |
| 287 |
cmd->base.port = PORT_BNC; |
| 288 |
else |
| 289 |
cmd->base.port = phydev->port; |
| 290 |
cmd->base.transceiver = phydev->is_internal ? |
| 291 |
XCVR_INTERNAL : XCVR_EXTERNAL; |
| 292 |
cmd->base.phy_address = phydev->mdio.addr; |
| 293 |
cmd->base.autoneg = phydev->autoneg; |
| 294 |
cmd->base.eth_tp_mdix_ctrl = phydev->mdix_ctrl; |
| 295 |
cmd->base.eth_tp_mdix = phydev->mdix; |
| 296 |
mutex_unlock(&phydev->lock); |
| 297 |
} |
| 298 |
EXPORT_SYMBOL(phy_ethtool_ksettings_get); |
| 299 |
|
| 300 |
/** |
| 301 |
* phy_mii_ioctl - generic PHY MII ioctl interface |
| 302 |
* @phydev: the phy_device struct |
| 303 |
* @ifr: &struct ifreq for socket ioctl's |
| 304 |
* @cmd: ioctl cmd to execute |
| 305 |
* |
| 306 |
* Note that this function is currently incompatible with the |
| 307 |
* PHYCONTROL layer. It changes registers without regard to |
| 308 |
* current state. Use at own risk. |
| 309 |
*/ |
| 310 |
int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd) |
| 311 |
{ |
| 312 |
struct mii_ioctl_data *mii_data = if_mii(ifr); |
| 313 |
struct kernel_hwtstamp_config kernel_cfg; |
| 314 |
struct netlink_ext_ack extack = {}; |
| 315 |
u16 val = mii_data->val_in; |
| 316 |
bool change_autoneg = false; |
| 317 |
struct hwtstamp_config cfg; |
| 318 |
int prtad, devad; |
| 319 |
int ret; |
| 320 |
|
| 321 |
switch (cmd) { |
| 322 |
case SIOCGMIIPHY: |
| 323 |
mii_data->phy_id = phydev->mdio.addr; |
| 324 |
fallthrough; |
| 325 |
|
| 326 |
case SIOCGMIIREG: |
| 327 |
if (mdio_phy_id_is_c45(mii_data->phy_id)) { |
| 328 |
prtad = mdio_phy_id_prtad(mii_data->phy_id); |
| 329 |
devad = mdio_phy_id_devad(mii_data->phy_id); |
| 330 |
ret = mdiobus_c45_read(phydev->mdio.bus, prtad, devad, |
| 331 |
mii_data->reg_num); |
| 332 |
|
| 333 |
} else { |
| 334 |
ret = mdiobus_read(phydev->mdio.bus, mii_data->phy_id, |
| 335 |
mii_data->reg_num); |
| 336 |
} |
| 337 |
|
| 338 |
if (ret < 0) |
| 339 |
return ret; |
| 340 |
|
| 341 |
mii_data->val_out = ret; |
| 342 |
|
| 343 |
return 0; |
| 344 |
|
| 345 |
case SIOCSMIIREG: |
| 346 |
if (mdio_phy_id_is_c45(mii_data->phy_id)) { |
| 347 |
prtad = mdio_phy_id_prtad(mii_data->phy_id); |
| 348 |
devad = mdio_phy_id_devad(mii_data->phy_id); |
| 349 |
} else { |
| 350 |
prtad = mii_data->phy_id; |
| 351 |
devad = mii_data->reg_num; |
| 352 |
} |
| 353 |
if (prtad == phydev->mdio.addr) { |
| 354 |
switch (devad) { |
| 355 |
case MII_BMCR: |
| 356 |
if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) { |
| 357 |
if (phydev->autoneg == AUTONEG_ENABLE) |
| 358 |
change_autoneg = true; |
| 359 |
phydev->autoneg = AUTONEG_DISABLE; |
| 360 |
if (val & BMCR_FULLDPLX) |
| 361 |
phydev->duplex = DUPLEX_FULL; |
| 362 |
else |
| 363 |
phydev->duplex = DUPLEX_HALF; |
| 364 |
if (val & BMCR_SPEED1000) |
| 365 |
phydev->speed = SPEED_1000; |
| 366 |
else if (val & BMCR_SPEED100) |
| 367 |
phydev->speed = SPEED_100; |
| 368 |
else phydev->speed = SPEED_10; |
| 369 |
} else { |
| 370 |
if (phydev->autoneg == AUTONEG_DISABLE) |
| 371 |
change_autoneg = true; |
| 372 |
phydev->autoneg = AUTONEG_ENABLE; |
| 373 |
} |
| 374 |
break; |
| 375 |
case MII_ADVERTISE: |
| 376 |
mii_adv_mod_linkmode_adv_t(phydev->advertising, |
| 377 |
val); |
| 378 |
change_autoneg = true; |
| 379 |
break; |
| 380 |
case MII_CTRL1000: |
| 381 |
mii_ctrl1000_mod_linkmode_adv_t(phydev->advertising, |
| 382 |
val); |
| 383 |
change_autoneg = true; |
| 384 |
break; |
| 385 |
default: |
| 386 |
/* do nothing */ |
| 387 |
break; |
| 388 |
} |
| 389 |
} |
| 390 |
|
| 391 |
if (mdio_phy_id_is_c45(mii_data->phy_id)) |
| 392 |
mdiobus_c45_write(phydev->mdio.bus, prtad, devad, |
| 393 |
mii_data->reg_num, val); |
| 394 |
else |
| 395 |
mdiobus_write(phydev->mdio.bus, prtad, devad, val); |
| 396 |
|
| 397 |
if (prtad == phydev->mdio.addr && |
| 398 |
devad == MII_BMCR && |
| 399 |
val & BMCR_RESET) |
| 400 |
return phy_init_hw(phydev); |
| 401 |
|
| 402 |
if (change_autoneg) |
| 403 |
return phy_start_aneg(phydev); |
| 404 |
|
| 405 |
return 0; |
| 406 |
|
| 407 |
case SIOCSHWTSTAMP: |
| 408 |
if (phydev->mii_ts && phydev->mii_ts->hwtstamp_set) { |
| 409 |
if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg))) |
| 410 |
return -EFAULT; |
| 411 |
|
| 412 |
hwtstamp_config_to_kernel(&kernel_cfg, &cfg); |
| 413 |
ret = phydev->mii_ts->hwtstamp_set(phydev->mii_ts, |
| 414 |
&kernel_cfg, |
| 415 |
&extack); |
| 416 |
if (ret) |
| 417 |
return ret; |
| 418 |
|
| 419 |
hwtstamp_config_from_kernel(&cfg, &kernel_cfg); |
| 420 |
if (copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg))) |
| 421 |
return -EFAULT; |
| 422 |
|
| 423 |
return 0; |
| 424 |
} |
| 425 |
fallthrough; |
| 426 |
|
| 427 |
default: |
| 428 |
return -EOPNOTSUPP; |
| 429 |
} |
| 430 |
} |
| 431 |
EXPORT_SYMBOL(phy_mii_ioctl); |
| 432 |
|
| 433 |
/** |
| 434 |
* phy_do_ioctl - generic ndo_eth_ioctl implementation |
| 435 |
* @dev: the net_device struct |
| 436 |
* @ifr: &struct ifreq for socket ioctl's |
| 437 |
* @cmd: ioctl cmd to execute |
| 438 |
*/ |
| 439 |
int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| 440 |
{ |
| 441 |
if (!dev->phydev) |
| 442 |
return -ENODEV; |
| 443 |
|
| 444 |
return phy_mii_ioctl(dev->phydev, ifr, cmd); |
| 445 |
} |
| 446 |
EXPORT_SYMBOL(phy_do_ioctl); |
| 447 |
|
| 448 |
/** |
| 449 |
* phy_do_ioctl_running - generic ndo_eth_ioctl implementation but test first |
| 450 |
* |
| 451 |
* @dev: the net_device struct |
| 452 |
* @ifr: &struct ifreq for socket ioctl's |
| 453 |
* @cmd: ioctl cmd to execute |
| 454 |
* |
| 455 |
* Same as phy_do_ioctl, but ensures that net_device is running before |
| 456 |
* handling the ioctl. |
| 457 |
*/ |
| 458 |
int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd) |
| 459 |
{ |
| 460 |
if (!netif_running(dev)) |
| 461 |
return -ENODEV; |
| 462 |
|
| 463 |
return phy_do_ioctl(dev, ifr, cmd); |
| 464 |
} |
| 465 |
EXPORT_SYMBOL(phy_do_ioctl_running); |
| 466 |
|
| 467 |
/** |
| 468 |
* __phy_hwtstamp_get - Get hardware timestamping configuration from PHY |
| 469 |
* |
| 470 |
* @phydev: the PHY device structure |
| 471 |
* @config: structure holding the timestamping configuration |
| 472 |
* |
| 473 |
* Query the PHY device for its current hardware timestamping configuration. |
| 474 |
*/ |
| 475 |
int __phy_hwtstamp_get(struct phy_device *phydev, |
| 476 |
struct kernel_hwtstamp_config *config) |
| 477 |
{ |
| 478 |
if (!phydev) |
| 479 |
return -ENODEV; |
| 480 |
|
| 481 |
if (phydev->mii_ts && phydev->mii_ts->hwtstamp_get) |
| 482 |
return phydev->mii_ts->hwtstamp_get(phydev->mii_ts, config); |
| 483 |
|
| 484 |
return -EOPNOTSUPP; |
| 485 |
} |
| 486 |
|
| 487 |
/** |
| 488 |
* __phy_hwtstamp_set - Modify PHY hardware timestamping configuration |
| 489 |
* |
| 490 |
* @phydev: the PHY device structure |
| 491 |
* @config: structure holding the timestamping configuration |
| 492 |
* @extack: netlink extended ack structure, for error reporting |
| 493 |
*/ |
| 494 |
int __phy_hwtstamp_set(struct phy_device *phydev, |
| 495 |
struct kernel_hwtstamp_config *config, |
| 496 |
struct netlink_ext_ack *extack) |
| 497 |
{ |
| 498 |
if (!phydev) |
| 499 |
return -ENODEV; |
| 500 |
|
| 501 |
if (phydev->mii_ts && phydev->mii_ts->hwtstamp_set) |
| 502 |
return phydev->mii_ts->hwtstamp_set(phydev->mii_ts, config, |
| 503 |
extack); |
| 504 |
|
| 505 |
return -EOPNOTSUPP; |
| 506 |
} |
| 507 |
|
| 508 |
/** |
| 509 |
* phy_queue_state_machine - Trigger the state machine to run soon |
| 510 |
* |
| 511 |
* @phydev: the phy_device struct |
| 512 |
* @jiffies: Run the state machine after these jiffies |
| 513 |
*/ |
| 514 |
static void phy_queue_state_machine(struct phy_device *phydev, |
| 515 |
unsigned long jiffies) |
| 516 |
{ |
| 517 |
mod_delayed_work(system_power_efficient_wq, &phydev->state_queue, |
| 518 |
jiffies); |
| 519 |
} |
| 520 |
|
| 521 |
/** |
| 522 |
* phy_trigger_machine - Trigger the state machine to run now |
| 523 |
* |
| 524 |
* @phydev: the phy_device struct |
| 525 |
*/ |
| 526 |
void phy_trigger_machine(struct phy_device *phydev) |
| 527 |
{ |
| 528 |
phy_queue_state_machine(phydev, 0); |
| 529 |
} |
| 530 |
EXPORT_SYMBOL(phy_trigger_machine); |
| 531 |
|
| 532 |
static void phy_abort_cable_test(struct phy_device *phydev) |
| 533 |
{ |
| 534 |
int err; |
| 535 |
|
| 536 |
ethnl_cable_test_finished(phydev); |
| 537 |
|
| 538 |
err = phy_init_hw(phydev); |
| 539 |
if (err) |
| 540 |
phydev_err(phydev, "Error while aborting cable test"); |
| 541 |
} |
| 542 |
|
| 543 |
/** |
| 544 |
* phy_ethtool_get_strings - Get the statistic counter names |
| 545 |
* |
| 546 |
* @phydev: the phy_device struct |
| 547 |
* @data: Where to put the strings |
| 548 |
*/ |
| 549 |
int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data) |
| 550 |
{ |
| 551 |
if (!phydev->drv) |
| 552 |
return -EIO; |
| 553 |
|
| 554 |
mutex_lock(&phydev->lock); |
| 555 |
phydev->drv->get_strings(phydev, data); |
| 556 |
mutex_unlock(&phydev->lock); |
| 557 |
|
| 558 |
return 0; |
| 559 |
} |
| 560 |
EXPORT_SYMBOL(phy_ethtool_get_strings); |
| 561 |
|
| 562 |
/** |
| 563 |
* phy_ethtool_get_sset_count - Get the number of statistic counters |
| 564 |
* |
| 565 |
* @phydev: the phy_device struct |
| 566 |
*/ |
| 567 |
int phy_ethtool_get_sset_count(struct phy_device *phydev) |
| 568 |
{ |
| 569 |
int ret; |
| 570 |
|
| 571 |
if (!phydev->drv) |
| 572 |
return -EIO; |
| 573 |
|
| 574 |
if (phydev->drv->get_sset_count && |
| 575 |
phydev->drv->get_strings && |
| 576 |
phydev->drv->get_stats) { |
| 577 |
mutex_lock(&phydev->lock); |
| 578 |
ret = phydev->drv->get_sset_count(phydev); |
| 579 |
mutex_unlock(&phydev->lock); |
| 580 |
|
| 581 |
return ret; |
| 582 |
} |
| 583 |
|
| 584 |
return -EOPNOTSUPP; |
| 585 |
} |
| 586 |
EXPORT_SYMBOL(phy_ethtool_get_sset_count); |
| 587 |
|
| 588 |
/** |
| 589 |
* phy_ethtool_get_stats - Get the statistic counters |
| 590 |
* |
| 591 |
* @phydev: the phy_device struct |
| 592 |
* @stats: What counters to get |
| 593 |
* @data: Where to store the counters |
| 594 |
*/ |
| 595 |
int phy_ethtool_get_stats(struct phy_device *phydev, |
| 596 |
struct ethtool_stats *stats, u64 *data) |
| 597 |
{ |
| 598 |
if (!phydev->drv) |
| 599 |
return -EIO; |
| 600 |
|
| 601 |
mutex_lock(&phydev->lock); |
| 602 |
phydev->drv->get_stats(phydev, stats, data); |
| 603 |
mutex_unlock(&phydev->lock); |
| 604 |
|
| 605 |
return 0; |
| 606 |
} |
| 607 |
EXPORT_SYMBOL(phy_ethtool_get_stats); |
| 608 |
|
| 609 |
/** |
| 610 |
* __phy_ethtool_get_phy_stats - Retrieve standardized PHY statistics |
| 611 |
* @phydev: Pointer to the PHY device |
| 612 |
* @phy_stats: Pointer to ethtool_eth_phy_stats structure |
| 613 |
* @phydev_stats: Pointer to ethtool_phy_stats structure |
| 614 |
* |
| 615 |
* Fetches PHY statistics using a kernel-defined interface for consistent |
| 616 |
* diagnostics. Unlike phy_ethtool_get_stats(), which allows custom stats, |
| 617 |
* this function enforces a standardized format for better interoperability. |
| 618 |
*/ |
| 619 |
void __phy_ethtool_get_phy_stats(struct phy_device *phydev, |
| 620 |
struct ethtool_eth_phy_stats *phy_stats, |
| 621 |
struct ethtool_phy_stats *phydev_stats) |
| 622 |
{ |
| 623 |
if (!phydev->drv || !phydev->drv->get_phy_stats) |
| 624 |
return; |
| 625 |
|
| 626 |
mutex_lock(&phydev->lock); |
| 627 |
phydev->drv->get_phy_stats(phydev, phy_stats, phydev_stats); |
| 628 |
mutex_unlock(&phydev->lock); |
| 629 |
} |
| 630 |
|
| 631 |
/** |
| 632 |
* __phy_ethtool_get_link_ext_stats - Retrieve extended link statistics for a PHY |
| 633 |
* @phydev: Pointer to the PHY device |
| 634 |
* @link_stats: Pointer to the structure to store extended link statistics |
| 635 |
* |
| 636 |
* Populates the ethtool_link_ext_stats structure with link down event counts |
| 637 |
* and additional driver-specific link statistics, if available. |
| 638 |
*/ |
| 639 |
void __phy_ethtool_get_link_ext_stats(struct phy_device *phydev, |
| 640 |
struct ethtool_link_ext_stats *link_stats) |
| 641 |
{ |
| 642 |
link_stats->link_down_events = READ_ONCE(phydev->link_down_events); |
| 643 |
|
| 644 |
if (!phydev->drv || !phydev->drv->get_link_stats) |
| 645 |
return; |
| 646 |
|
| 647 |
mutex_lock(&phydev->lock); |
| 648 |
phydev->drv->get_link_stats(phydev, link_stats); |
| 649 |
mutex_unlock(&phydev->lock); |
| 650 |
} |
| 651 |
|
| 652 |
/** |
| 653 |
* phy_ethtool_get_plca_cfg - Get PLCA RS configuration |
| 654 |
* @phydev: the phy_device struct |
| 655 |
* @plca_cfg: where to store the retrieved configuration |
| 656 |
* |
| 657 |
* Retrieve the PLCA configuration from the PHY. Return 0 on success or a |
| 658 |
* negative value if an error occurred. |
| 659 |
*/ |
| 660 |
int phy_ethtool_get_plca_cfg(struct phy_device *phydev, |
| 661 |
struct phy_plca_cfg *plca_cfg) |
| 662 |
{ |
| 663 |
int ret; |
| 664 |
|
| 665 |
if (!phydev->drv) { |
| 666 |
ret = -EIO; |
| 667 |
goto out; |
| 668 |
} |
| 669 |
|
| 670 |
if (!phydev->drv->get_plca_cfg) { |
| 671 |
ret = -EOPNOTSUPP; |
| 672 |
goto out; |
| 673 |
} |
| 674 |
|
| 675 |
mutex_lock(&phydev->lock); |
| 676 |
ret = phydev->drv->get_plca_cfg(phydev, plca_cfg); |
| 677 |
|
| 678 |
mutex_unlock(&phydev->lock); |
| 679 |
out: |
| 680 |
return ret; |
| 681 |
} |
| 682 |
|
| 683 |
/** |
| 684 |
* plca_check_valid - Check PLCA configuration before enabling |
| 685 |
* @phydev: the phy_device struct |
| 686 |
* @plca_cfg: current PLCA configuration |
| 687 |
* @extack: extack for reporting useful error messages |
| 688 |
* |
| 689 |
* Checks whether the PLCA and PHY configuration are consistent and it is safe |
| 690 |
* to enable PLCA. Returns 0 on success or a negative value if the PLCA or PHY |
| 691 |
* configuration is not consistent. |
| 692 |
*/ |
| 693 |
static int plca_check_valid(struct phy_device *phydev, |
| 694 |
const struct phy_plca_cfg *plca_cfg, |
| 695 |
struct netlink_ext_ack *extack) |
| 696 |
{ |
| 697 |
int ret = 0; |
| 698 |
|
| 699 |
if (!linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT, |
| 700 |
phydev->advertising)) { |
| 701 |
ret = -EOPNOTSUPP; |
| 702 |
NL_SET_ERR_MSG(extack, |
| 703 |
"Point to Multi-Point mode is not enabled"); |
| 704 |
} else if (plca_cfg->node_id >= 255) { |
| 705 |
NL_SET_ERR_MSG(extack, "PLCA node ID is not set"); |
| 706 |
ret = -EINVAL; |
| 707 |
} |
| 708 |
|
| 709 |
return ret; |
| 710 |
} |
| 711 |
|
| 712 |
/** |
| 713 |
* phy_ethtool_set_plca_cfg - Set PLCA RS configuration |
| 714 |
* @phydev: the phy_device struct |
| 715 |
* @plca_cfg: new PLCA configuration to apply |
| 716 |
* @extack: extack for reporting useful error messages |
| 717 |
* |
| 718 |
* Sets the PLCA configuration in the PHY. Return 0 on success or a |
| 719 |
* negative value if an error occurred. |
| 720 |
*/ |
| 721 |
int phy_ethtool_set_plca_cfg(struct phy_device *phydev, |
| 722 |
const struct phy_plca_cfg *plca_cfg, |
| 723 |
struct netlink_ext_ack *extack) |
| 724 |
{ |
| 725 |
struct phy_plca_cfg *curr_plca_cfg; |
| 726 |
int ret; |
| 727 |
|
| 728 |
if (!phydev->drv) { |
| 729 |
ret = -EIO; |
| 730 |
goto out; |
| 731 |
} |
| 732 |
|
| 733 |
if (!phydev->drv->set_plca_cfg || |
| 734 |
!phydev->drv->get_plca_cfg) { |
| 735 |
ret = -EOPNOTSUPP; |
| 736 |
goto out; |
| 737 |
} |
| 738 |
|
| 739 |
curr_plca_cfg = kmalloc_obj(*curr_plca_cfg); |
| 740 |
if (!curr_plca_cfg) { |
| 741 |
ret = -ENOMEM; |
| 742 |
goto out; |
| 743 |
} |
| 744 |
|
| 745 |
mutex_lock(&phydev->lock); |
| 746 |
|
| 747 |
ret = phydev->drv->get_plca_cfg(phydev, curr_plca_cfg); |
| 748 |
if (ret) |
| 749 |
goto out_drv; |
| 750 |
|
| 751 |
if (curr_plca_cfg->enabled < 0 && plca_cfg->enabled >= 0) { |
| 752 |
NL_SET_ERR_MSG(extack, |
| 753 |
"PHY does not support changing the PLCA 'enable' attribute"); |
| 754 |
ret = -EINVAL; |
| 755 |
goto out_drv; |
| 756 |
} |
| 757 |
|
| 758 |
if (curr_plca_cfg->node_id < 0 && plca_cfg->node_id >= 0) { |
| 759 |
NL_SET_ERR_MSG(extack, |
| 760 |
"PHY does not support changing the PLCA 'local node ID' attribute"); |
| 761 |
ret = -EINVAL; |
| 762 |
goto out_drv; |
| 763 |
} |
| 764 |
|
| 765 |
if (curr_plca_cfg->node_cnt < 0 && plca_cfg->node_cnt >= 0) { |
| 766 |
NL_SET_ERR_MSG(extack, |
| 767 |
"PHY does not support changing the PLCA 'node count' attribute"); |
| 768 |
ret = -EINVAL; |
| 769 |
goto out_drv; |
| 770 |
} |
| 771 |
|
| 772 |
if (curr_plca_cfg->to_tmr < 0 && plca_cfg->to_tmr >= 0) { |
| 773 |
NL_SET_ERR_MSG(extack, |
| 774 |
"PHY does not support changing the PLCA 'TO timer' attribute"); |
| 775 |
ret = -EINVAL; |
| 776 |
goto out_drv; |
| 777 |
} |
| 778 |
|
| 779 |
if (curr_plca_cfg->burst_cnt < 0 && plca_cfg->burst_cnt >= 0) { |
| 780 |
NL_SET_ERR_MSG(extack, |
| 781 |
"PHY does not support changing the PLCA 'burst count' attribute"); |
| 782 |
ret = -EINVAL; |
| 783 |
goto out_drv; |
| 784 |
} |
| 785 |
|
| 786 |
if (curr_plca_cfg->burst_tmr < 0 && plca_cfg->burst_tmr >= 0) { |
| 787 |
NL_SET_ERR_MSG(extack, |
| 788 |
"PHY does not support changing the PLCA 'burst timer' attribute"); |
| 789 |
ret = -EINVAL; |
| 790 |
goto out_drv; |
| 791 |
} |
| 792 |
|
| 793 |
// if enabling PLCA, perform a few sanity checks |
| 794 |
if (plca_cfg->enabled > 0) { |
| 795 |
// allow setting node_id concurrently with enabled |
| 796 |
if (plca_cfg->node_id >= 0) |
| 797 |
curr_plca_cfg->node_id = plca_cfg->node_id; |
| 798 |
|
| 799 |
ret = plca_check_valid(phydev, curr_plca_cfg, extack); |
| 800 |
if (ret) |
| 801 |
goto out_drv; |
| 802 |
} |
| 803 |
|
| 804 |
ret = phydev->drv->set_plca_cfg(phydev, plca_cfg); |
| 805 |
|
| 806 |
out_drv: |
| 807 |
kfree(curr_plca_cfg); |
| 808 |
mutex_unlock(&phydev->lock); |
| 809 |
out: |
| 810 |
return ret; |
| 811 |
} |
| 812 |
|
| 813 |
/** |
| 814 |
* phy_ethtool_get_plca_status - Get PLCA RS status information |
| 815 |
* @phydev: the phy_device struct |
| 816 |
* @plca_st: where to store the retrieved status information |
| 817 |
* |
| 818 |
* Retrieve the PLCA status information from the PHY. Return 0 on success or a |
| 819 |
* negative value if an error occurred. |
| 820 |
*/ |
| 821 |
int phy_ethtool_get_plca_status(struct phy_device *phydev, |
| 822 |
struct phy_plca_status *plca_st) |
| 823 |
{ |
| 824 |
int ret; |
| 825 |
|
| 826 |
if (!phydev->drv) { |
| 827 |
ret = -EIO; |
| 828 |
goto out; |
| 829 |
} |
| 830 |
|
| 831 |
if (!phydev->drv->get_plca_status) { |
| 832 |
ret = -EOPNOTSUPP; |
| 833 |
goto out; |
| 834 |
} |
| 835 |
|
| 836 |
mutex_lock(&phydev->lock); |
| 837 |
ret = phydev->drv->get_plca_status(phydev, plca_st); |
| 838 |
|
| 839 |
mutex_unlock(&phydev->lock); |
| 840 |
out: |
| 841 |
return ret; |
| 842 |
} |
| 843 |
|
| 844 |
/** |
| 845 |
* phy_start_cable_test - Start a cable test |
| 846 |
* |
| 847 |
* @phydev: the phy_device struct |
| 848 |
* @extack: extack for reporting useful error messages |
| 849 |
*/ |
| 850 |
int phy_start_cable_test(struct phy_device *phydev, |
| 851 |
struct netlink_ext_ack *extack) |
| 852 |
{ |
| 853 |
struct net_device *dev = phydev->attached_dev; |
| 854 |
int err = -ENOMEM; |
| 855 |
|
| 856 |
if (!(phydev->drv && |
| 857 |
phydev->drv->cable_test_start && |
| 858 |
phydev->drv->cable_test_get_status)) { |
| 859 |
NL_SET_ERR_MSG(extack, |
| 860 |
"PHY driver does not support cable testing"); |
| 861 |
return -EOPNOTSUPP; |
| 862 |
} |
| 863 |
|
| 864 |
mutex_lock(&phydev->lock); |
| 865 |
if (phydev->state == PHY_CABLETEST) { |
| 866 |
NL_SET_ERR_MSG(extack, |
| 867 |
"PHY already performing a test"); |
| 868 |
err = -EBUSY; |
| 869 |
goto out; |
| 870 |
} |
| 871 |
|
| 872 |
if (phydev->state < PHY_UP || |
| 873 |
phydev->state > PHY_CABLETEST) { |
| 874 |
NL_SET_ERR_MSG(extack, |
| 875 |
"PHY not configured. Try setting interface up"); |
| 876 |
err = -EBUSY; |
| 877 |
goto out; |
| 878 |
} |
| 879 |
|
| 880 |
err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF); |
| 881 |
if (err) |
| 882 |
goto out; |
| 883 |
|
| 884 |
/* Mark the carrier down until the test is complete */ |
| 885 |
phy_link_down(phydev); |
| 886 |
|
| 887 |
netif_testing_on(dev); |
| 888 |
err = phydev->drv->cable_test_start(phydev); |
| 889 |
if (err) { |
| 890 |
netif_testing_off(dev); |
| 891 |
phy_link_up(phydev); |
| 892 |
goto out_free; |
| 893 |
} |
| 894 |
|
| 895 |
phydev->state = PHY_CABLETEST; |
| 896 |
|
| 897 |
if (phy_polling_mode(phydev)) |
| 898 |
phy_trigger_machine(phydev); |
| 899 |
|
| 900 |
mutex_unlock(&phydev->lock); |
| 901 |
|
| 902 |
return 0; |
| 903 |
|
| 904 |
out_free: |
| 905 |
ethnl_cable_test_free(phydev); |
| 906 |
out: |
| 907 |
mutex_unlock(&phydev->lock); |
| 908 |
|
| 909 |
return err; |
| 910 |
} |
| 911 |
EXPORT_SYMBOL(phy_start_cable_test); |
| 912 |
|
| 913 |
/** |
| 914 |
* phy_start_cable_test_tdr - Start a raw TDR cable test |
| 915 |
* |
| 916 |
* @phydev: the phy_device struct |
| 917 |
* @extack: extack for reporting useful error messages |
| 918 |
* @config: Configuration of the test to run |
| 919 |
*/ |
| 920 |
int phy_start_cable_test_tdr(struct phy_device *phydev, |
| 921 |
struct netlink_ext_ack *extack, |
| 922 |
const struct phy_tdr_config *config) |
| 923 |
{ |
| 924 |
struct net_device *dev = phydev->attached_dev; |
| 925 |
int err = -ENOMEM; |
| 926 |
|
| 927 |
if (!(phydev->drv && |
| 928 |
phydev->drv->cable_test_tdr_start && |
| 929 |
phydev->drv->cable_test_get_status)) { |
| 930 |
NL_SET_ERR_MSG(extack, |
| 931 |
"PHY driver does not support cable test TDR"); |
| 932 |
return -EOPNOTSUPP; |
| 933 |
} |
| 934 |
|
| 935 |
mutex_lock(&phydev->lock); |
| 936 |
if (phydev->state == PHY_CABLETEST) { |
| 937 |
NL_SET_ERR_MSG(extack, |
| 938 |
"PHY already performing a test"); |
| 939 |
err = -EBUSY; |
| 940 |
goto out; |
| 941 |
} |
| 942 |
|
| 943 |
if (phydev->state < PHY_UP || |
| 944 |
phydev->state > PHY_CABLETEST) { |
| 945 |
NL_SET_ERR_MSG(extack, |
| 946 |
"PHY not configured. Try setting interface up"); |
| 947 |
err = -EBUSY; |
| 948 |
goto out; |
| 949 |
} |
| 950 |
|
| 951 |
err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_TDR_NTF); |
| 952 |
if (err) |
| 953 |
goto out; |
| 954 |
|
| 955 |
/* Mark the carrier down until the test is complete */ |
| 956 |
phy_link_down(phydev); |
| 957 |
|
| 958 |
netif_testing_on(dev); |
| 959 |
err = phydev->drv->cable_test_tdr_start(phydev, config); |
| 960 |
if (err) { |
| 961 |
netif_testing_off(dev); |
| 962 |
phy_link_up(phydev); |
| 963 |
goto out_free; |
| 964 |
} |
| 965 |
|
| 966 |
phydev->state = PHY_CABLETEST; |
| 967 |
|
| 968 |
if (phy_polling_mode(phydev)) |
| 969 |
phy_trigger_machine(phydev); |
| 970 |
|
| 971 |
mutex_unlock(&phydev->lock); |
| 972 |
|
| 973 |
return 0; |
| 974 |
|
| 975 |
out_free: |
| 976 |
ethnl_cable_test_free(phydev); |
| 977 |
out: |
| 978 |
mutex_unlock(&phydev->lock); |
| 979 |
|
| 980 |
return err; |
| 981 |
} |
| 982 |
EXPORT_SYMBOL(phy_start_cable_test_tdr); |
| 983 |
|
| 984 |
int phy_config_aneg(struct phy_device *phydev) |
| 985 |
{ |
| 986 |
if (phydev->drv->config_aneg) |
| 987 |
return phydev->drv->config_aneg(phydev); |
| 988 |
|
| 989 |
/* Clause 45 PHYs that don't implement Clause 22 registers are not |
| 990 |
* allowed to call genphy_config_aneg() |
| 991 |
*/ |
| 992 |
if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0))) |
| 993 |
return genphy_c45_config_aneg(phydev); |
| 994 |
|
| 995 |
return genphy_config_aneg(phydev); |
| 996 |
} |
| 997 |
EXPORT_SYMBOL(phy_config_aneg); |
| 998 |
|
| 999 |
/** |
| 1000 |
* phy_check_link_status - check link status and set state accordingly |
| 1001 |
* @phydev: the phy_device struct |
| 1002 |
* |
| 1003 |
* Description: Check for link and whether autoneg was triggered / is running |
| 1004 |
* and set state accordingly |
| 1005 |
*/ |
| 1006 |
static int phy_check_link_status(struct phy_device *phydev) |
| 1007 |
{ |
| 1008 |
int err; |
| 1009 |
|
| 1010 |
lockdep_assert_held(&phydev->lock); |
| 1011 |
|
| 1012 |
/* Keep previous state if loopback is enabled because some PHYs |
| 1013 |
* report that Link is Down when loopback is enabled. |
| 1014 |
*/ |
| 1015 |
if (phydev->loopback_enabled) |
| 1016 |
return 0; |
| 1017 |
|
| 1018 |
err = phy_read_status(phydev); |
| 1019 |
if (err) |
| 1020 |
return err; |
| 1021 |
|
| 1022 |
if (phydev->link && phydev->state != PHY_RUNNING) { |
| 1023 |
phy_check_downshift(phydev); |
| 1024 |
phydev->state = PHY_RUNNING; |
| 1025 |
err = genphy_c45_eee_is_active(phydev, NULL); |
| 1026 |
phydev->eee_active = err > 0; |
| 1027 |
phydev->enable_tx_lpi = phydev->eee_cfg.tx_lpi_enabled && |
| 1028 |
phydev->eee_active; |
| 1029 |
|
| 1030 |
phy_link_up(phydev); |
| 1031 |
} else if (!phydev->link && phydev->state != PHY_NOLINK) { |
| 1032 |
phydev->state = PHY_NOLINK; |
| 1033 |
phydev->eee_active = false; |
| 1034 |
phydev->enable_tx_lpi = false; |
| 1035 |
phy_link_down(phydev); |
| 1036 |
} |
| 1037 |
|
| 1038 |
return 0; |
| 1039 |
} |
| 1040 |
|
| 1041 |
/** |
| 1042 |
* phy_inband_caps - query which in-band signalling modes are supported |
| 1043 |
* @phydev: a pointer to a &struct phy_device |
| 1044 |
* @interface: the interface mode for the PHY |
| 1045 |
* |
| 1046 |
* Returns zero if it is unknown what in-band signalling is supported by the |
| 1047 |
* PHY (e.g. because the PHY driver doesn't implement the method.) Otherwise, |
| 1048 |
* returns a bit mask of the LINK_INBAND_* values from |
| 1049 |
* &enum link_inband_signalling to describe which inband modes are supported |
| 1050 |
* by the PHY for this interface mode. |
| 1051 |
*/ |
| 1052 |
unsigned int phy_inband_caps(struct phy_device *phydev, |
| 1053 |
phy_interface_t interface) |
| 1054 |
{ |
| 1055 |
if (phydev->drv && phydev->drv->inband_caps) |
| 1056 |
return phydev->drv->inband_caps(phydev, interface); |
| 1057 |
|
| 1058 |
return 0; |
| 1059 |
} |
| 1060 |
EXPORT_SYMBOL_GPL(phy_inband_caps); |
| 1061 |
|
| 1062 |
/** |
| 1063 |
* phy_config_inband - configure the desired PHY in-band mode |
| 1064 |
* @phydev: the phy_device struct |
| 1065 |
* @modes: in-band modes to configure |
| 1066 |
* |
| 1067 |
* Description: disables, enables or enables-with-bypass in-band signalling |
| 1068 |
* between the PHY and host system. |
| 1069 |
* |
| 1070 |
* Returns: zero on success, or negative errno value. |
| 1071 |
*/ |
| 1072 |
int phy_config_inband(struct phy_device *phydev, unsigned int modes) |
| 1073 |
{ |
| 1074 |
lockdep_assert_held(&phydev->lock); |
| 1075 |
|
| 1076 |
if (!!(modes & LINK_INBAND_DISABLE) + |
| 1077 |
!!(modes & LINK_INBAND_ENABLE) + |
| 1078 |
!!(modes & LINK_INBAND_BYPASS) != 1) |
| 1079 |
return -EINVAL; |
| 1080 |
|
| 1081 |
if (!phydev->drv) |
| 1082 |
return -EIO; |
| 1083 |
else if (!phydev->drv->config_inband) |
| 1084 |
return -EOPNOTSUPP; |
| 1085 |
|
| 1086 |
return phydev->drv->config_inband(phydev, modes); |
| 1087 |
} |
| 1088 |
EXPORT_SYMBOL(phy_config_inband); |
| 1089 |
|
| 1090 |
/** |
| 1091 |
* _phy_start_aneg - start auto-negotiation for this PHY device |
| 1092 |
* @phydev: the phy_device struct |
| 1093 |
* |
| 1094 |
* Description: Sanitizes the settings (if we're not autonegotiating |
| 1095 |
* them), and then calls the driver's config_aneg function. |
| 1096 |
* If the PHYCONTROL Layer is operating, we change the state to |
| 1097 |
* reflect the beginning of Auto-negotiation or forcing. |
| 1098 |
*/ |
| 1099 |
int _phy_start_aneg(struct phy_device *phydev) |
| 1100 |
{ |
| 1101 |
int err; |
| 1102 |
|
| 1103 |
lockdep_assert_held(&phydev->lock); |
| 1104 |
|
| 1105 |
if (!phydev->drv) |
| 1106 |
return -EIO; |
| 1107 |
|
| 1108 |
if (AUTONEG_DISABLE == phydev->autoneg) |
| 1109 |
phy_sanitize_settings(phydev); |
| 1110 |
|
| 1111 |
err = phy_config_aneg(phydev); |
| 1112 |
if (err < 0) |
| 1113 |
return err; |
| 1114 |
|
| 1115 |
if (phy_is_started(phydev)) |
| 1116 |
err = phy_check_link_status(phydev); |
| 1117 |
|
| 1118 |
return err; |
| 1119 |
} |
| 1120 |
EXPORT_SYMBOL(_phy_start_aneg); |
| 1121 |
|
| 1122 |
/** |
| 1123 |
* phy_start_aneg - start auto-negotiation for this PHY device |
| 1124 |
* @phydev: the phy_device struct |
| 1125 |
* |
| 1126 |
* Description: Sanitizes the settings (if we're not autonegotiating |
| 1127 |
* them), and then calls the driver's config_aneg function. |
| 1128 |
* If the PHYCONTROL Layer is operating, we change the state to |
| 1129 |
* reflect the beginning of Auto-negotiation or forcing. |
| 1130 |
*/ |
| 1131 |
int phy_start_aneg(struct phy_device *phydev) |
| 1132 |
{ |
| 1133 |
int err; |
| 1134 |
|
| 1135 |
mutex_lock(&phydev->lock); |
| 1136 |
err = _phy_start_aneg(phydev); |
| 1137 |
mutex_unlock(&phydev->lock); |
| 1138 |
|
| 1139 |
return err; |
| 1140 |
} |
| 1141 |
EXPORT_SYMBOL(phy_start_aneg); |
| 1142 |
|
| 1143 |
static int phy_poll_aneg_done(struct phy_device *phydev) |
| 1144 |
{ |
| 1145 |
unsigned int retries = 100; |
| 1146 |
int ret; |
| 1147 |
|
| 1148 |
do { |
| 1149 |
msleep(100); |
| 1150 |
ret = phy_aneg_done(phydev); |
| 1151 |
} while (!ret && --retries); |
| 1152 |
|
| 1153 |
if (!ret) |
| 1154 |
return -ETIMEDOUT; |
| 1155 |
|
| 1156 |
return ret < 0 ? ret : 0; |
| 1157 |
} |
| 1158 |
|
| 1159 |
int phy_ethtool_ksettings_set(struct phy_device *phydev, |
| 1160 |
const struct ethtool_link_ksettings *cmd) |
| 1161 |
{ |
| 1162 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); |
| 1163 |
u8 autoneg = cmd->base.autoneg; |
| 1164 |
u8 duplex = cmd->base.duplex; |
| 1165 |
u32 speed = cmd->base.speed; |
| 1166 |
|
| 1167 |
if (cmd->base.phy_address != phydev->mdio.addr) |
| 1168 |
return -EINVAL; |
| 1169 |
|
| 1170 |
linkmode_copy(advertising, cmd->link_modes.advertising); |
| 1171 |
|
| 1172 |
/* We make sure that we don't pass unsupported values in to the PHY */ |
| 1173 |
linkmode_and(advertising, advertising, phydev->supported); |
| 1174 |
|
| 1175 |
/* Verify the settings we care about. */ |
| 1176 |
if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE) |
| 1177 |
return -EINVAL; |
| 1178 |
|
| 1179 |
if (autoneg == AUTONEG_ENABLE && |
| 1180 |
(linkmode_empty(advertising) || |
| 1181 |
!linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 1182 |
phydev->supported))) |
| 1183 |
return -EINVAL; |
| 1184 |
|
| 1185 |
if (autoneg == AUTONEG_DISABLE && |
| 1186 |
((speed != SPEED_1000 && |
| 1187 |
speed != SPEED_100 && |
| 1188 |
speed != SPEED_10) || |
| 1189 |
(duplex != DUPLEX_HALF && |
| 1190 |
duplex != DUPLEX_FULL))) |
| 1191 |
return -EINVAL; |
| 1192 |
|
| 1193 |
mutex_lock(&phydev->lock); |
| 1194 |
phydev->autoneg = autoneg; |
| 1195 |
|
| 1196 |
if (autoneg == AUTONEG_DISABLE) { |
| 1197 |
phydev->speed = speed; |
| 1198 |
phydev->duplex = duplex; |
| 1199 |
} |
| 1200 |
|
| 1201 |
linkmode_copy(phydev->advertising, advertising); |
| 1202 |
|
| 1203 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 1204 |
phydev->advertising, autoneg == AUTONEG_ENABLE); |
| 1205 |
|
| 1206 |
phydev->master_slave_set = cmd->base.master_slave_cfg; |
| 1207 |
phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl; |
| 1208 |
|
| 1209 |
/* Restart the PHY */ |
| 1210 |
if (phy_is_started(phydev)) { |
| 1211 |
phydev->state = PHY_UP; |
| 1212 |
phy_trigger_machine(phydev); |
| 1213 |
} else { |
| 1214 |
_phy_start_aneg(phydev); |
| 1215 |
} |
| 1216 |
|
| 1217 |
mutex_unlock(&phydev->lock); |
| 1218 |
return 0; |
| 1219 |
} |
| 1220 |
EXPORT_SYMBOL(phy_ethtool_ksettings_set); |
| 1221 |
|
| 1222 |
/** |
| 1223 |
* phy_speed_down - set speed to lowest speed supported by both link partners |
| 1224 |
* @phydev: the phy_device struct |
| 1225 |
* @sync: perform action synchronously |
| 1226 |
* |
| 1227 |
* Description: Typically used to save energy when waiting for a WoL packet |
| 1228 |
* |
| 1229 |
* WARNING: Setting sync to false may cause the system being unable to suspend |
| 1230 |
* in case the PHY generates an interrupt when finishing the autonegotiation. |
| 1231 |
* This interrupt may wake up the system immediately after suspend. |
| 1232 |
* Therefore use sync = false only if you're sure it's safe with the respective |
| 1233 |
* network chip. |
| 1234 |
*/ |
| 1235 |
int phy_speed_down(struct phy_device *phydev, bool sync) |
| 1236 |
{ |
| 1237 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp); |
| 1238 |
int ret = 0; |
| 1239 |
|
| 1240 |
mutex_lock(&phydev->lock); |
| 1241 |
|
| 1242 |
if (phydev->autoneg != AUTONEG_ENABLE) |
| 1243 |
goto out; |
| 1244 |
|
| 1245 |
linkmode_copy(adv_tmp, phydev->advertising); |
| 1246 |
|
| 1247 |
ret = phy_speed_down_core(phydev); |
| 1248 |
if (ret) |
| 1249 |
goto out; |
| 1250 |
|
| 1251 |
linkmode_copy(phydev->adv_old, adv_tmp); |
| 1252 |
|
| 1253 |
if (linkmode_equal(phydev->advertising, adv_tmp)) { |
| 1254 |
ret = 0; |
| 1255 |
goto out; |
| 1256 |
} |
| 1257 |
|
| 1258 |
ret = phy_config_aneg(phydev); |
| 1259 |
if (ret) |
| 1260 |
goto out; |
| 1261 |
|
| 1262 |
ret = sync ? phy_poll_aneg_done(phydev) : 0; |
| 1263 |
out: |
| 1264 |
mutex_unlock(&phydev->lock); |
| 1265 |
|
| 1266 |
return ret; |
| 1267 |
} |
| 1268 |
EXPORT_SYMBOL_GPL(phy_speed_down); |
| 1269 |
|
| 1270 |
/** |
| 1271 |
* phy_speed_up - (re)set advertised speeds to all supported speeds |
| 1272 |
* @phydev: the phy_device struct |
| 1273 |
* |
| 1274 |
* Description: Used to revert the effect of phy_speed_down |
| 1275 |
*/ |
| 1276 |
int phy_speed_up(struct phy_device *phydev) |
| 1277 |
{ |
| 1278 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp); |
| 1279 |
int ret = 0; |
| 1280 |
|
| 1281 |
mutex_lock(&phydev->lock); |
| 1282 |
|
| 1283 |
if (phydev->autoneg != AUTONEG_ENABLE) |
| 1284 |
goto out; |
| 1285 |
|
| 1286 |
if (linkmode_empty(phydev->adv_old)) |
| 1287 |
goto out; |
| 1288 |
|
| 1289 |
linkmode_copy(adv_tmp, phydev->advertising); |
| 1290 |
linkmode_copy(phydev->advertising, phydev->adv_old); |
| 1291 |
linkmode_zero(phydev->adv_old); |
| 1292 |
|
| 1293 |
if (linkmode_equal(phydev->advertising, adv_tmp)) |
| 1294 |
goto out; |
| 1295 |
|
| 1296 |
ret = phy_config_aneg(phydev); |
| 1297 |
out: |
| 1298 |
mutex_unlock(&phydev->lock); |
| 1299 |
|
| 1300 |
return ret; |
| 1301 |
} |
| 1302 |
EXPORT_SYMBOL_GPL(phy_speed_up); |
| 1303 |
|
| 1304 |
/** |
| 1305 |
* phy_start_machine - start PHY state machine tracking |
| 1306 |
* @phydev: the phy_device struct |
| 1307 |
* |
| 1308 |
* Description: The PHY infrastructure can run a state machine |
| 1309 |
* which tracks whether the PHY is starting up, negotiating, |
| 1310 |
* etc. This function starts the delayed workqueue which tracks |
| 1311 |
* the state of the PHY. If you want to maintain your own state machine, |
| 1312 |
* do not call this function. |
| 1313 |
*/ |
| 1314 |
void phy_start_machine(struct phy_device *phydev) |
| 1315 |
{ |
| 1316 |
phy_trigger_machine(phydev); |
| 1317 |
} |
| 1318 |
EXPORT_SYMBOL_GPL(phy_start_machine); |
| 1319 |
|
| 1320 |
/** |
| 1321 |
* phy_stop_machine - stop the PHY state machine tracking |
| 1322 |
* @phydev: target phy_device struct |
| 1323 |
* |
| 1324 |
* Description: Stops the state machine delayed workqueue, sets the |
| 1325 |
* state to UP (unless it wasn't up yet). This function must be |
| 1326 |
* called BEFORE phy_detach. |
| 1327 |
*/ |
| 1328 |
void phy_stop_machine(struct phy_device *phydev) |
| 1329 |
{ |
| 1330 |
cancel_delayed_work_sync(&phydev->state_queue); |
| 1331 |
|
| 1332 |
mutex_lock(&phydev->lock); |
| 1333 |
if (phy_is_started(phydev)) |
| 1334 |
phydev->state = PHY_UP; |
| 1335 |
mutex_unlock(&phydev->lock); |
| 1336 |
} |
| 1337 |
|
| 1338 |
static void phy_process_error(struct phy_device *phydev) |
| 1339 |
{ |
| 1340 |
/* phydev->lock must be held for the state change to be safe */ |
| 1341 |
if (!mutex_is_locked(&phydev->lock)) |
| 1342 |
phydev_err(phydev, "PHY-device data unsafe context\n"); |
| 1343 |
|
| 1344 |
phydev->state = PHY_ERROR; |
| 1345 |
|
| 1346 |
phy_trigger_machine(phydev); |
| 1347 |
} |
| 1348 |
|
| 1349 |
static void phy_error_precise(struct phy_device *phydev, |
| 1350 |
const void *func, int err) |
| 1351 |
{ |
| 1352 |
WARN(1, "%pS: returned: %d\n", func, err); |
| 1353 |
phy_process_error(phydev); |
| 1354 |
} |
| 1355 |
|
| 1356 |
/** |
| 1357 |
* phy_error - enter ERROR state for this PHY device |
| 1358 |
* @phydev: target phy_device struct |
| 1359 |
* |
| 1360 |
* Moves the PHY to the ERROR state in response to a read |
| 1361 |
* or write error, and tells the controller the link is down. |
| 1362 |
* Must be called with phydev->lock held. |
| 1363 |
*/ |
| 1364 |
void phy_error(struct phy_device *phydev) |
| 1365 |
{ |
| 1366 |
WARN_ON(1); |
| 1367 |
phy_process_error(phydev); |
| 1368 |
} |
| 1369 |
EXPORT_SYMBOL(phy_error); |
| 1370 |
|
| 1371 |
/** |
| 1372 |
* phy_disable_interrupts - Disable the PHY interrupts from the PHY side |
| 1373 |
* @phydev: target phy_device struct |
| 1374 |
*/ |
| 1375 |
int phy_disable_interrupts(struct phy_device *phydev) |
| 1376 |
{ |
| 1377 |
/* Disable PHY interrupts */ |
| 1378 |
return phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); |
| 1379 |
} |
| 1380 |
|
| 1381 |
/** |
| 1382 |
* phy_interrupt - PHY interrupt handler |
| 1383 |
* @irq: interrupt line |
| 1384 |
* @phy_dat: phy_device pointer |
| 1385 |
* |
| 1386 |
* Description: Handle PHY interrupt |
| 1387 |
*/ |
| 1388 |
static irqreturn_t phy_interrupt(int irq, void *phy_dat) |
| 1389 |
{ |
| 1390 |
struct phy_device *phydev = phy_dat; |
| 1391 |
irqreturn_t ret; |
| 1392 |
|
| 1393 |
/* Wakeup interrupts may occur during a system sleep transition. |
| 1394 |
* Postpone handling until the PHY has resumed. |
| 1395 |
*/ |
| 1396 |
if (IS_ENABLED(CONFIG_PM_SLEEP) && phydev->irq_suspended) { |
| 1397 |
struct net_device *netdev = phydev->attached_dev; |
| 1398 |
|
| 1399 |
if (netdev) { |
| 1400 |
struct device *parent = netdev->dev.parent; |
| 1401 |
|
| 1402 |
if (netdev->ethtool->wol_enabled) |
| 1403 |
pm_system_wakeup(); |
| 1404 |
else if (device_may_wakeup(&netdev->dev)) |
| 1405 |
pm_wakeup_dev_event(&netdev->dev, 0, true); |
| 1406 |
else if (parent && device_may_wakeup(parent)) |
| 1407 |
pm_wakeup_dev_event(parent, 0, true); |
| 1408 |
} |
| 1409 |
|
| 1410 |
phydev->irq_rerun = 1; |
| 1411 |
disable_irq_nosync(irq); |
| 1412 |
return IRQ_HANDLED; |
| 1413 |
} |
| 1414 |
|
| 1415 |
mutex_lock(&phydev->lock); |
| 1416 |
ret = phydev->drv->handle_interrupt(phydev); |
| 1417 |
mutex_unlock(&phydev->lock); |
| 1418 |
|
| 1419 |
return ret; |
| 1420 |
} |
| 1421 |
|
| 1422 |
/** |
| 1423 |
* phy_enable_interrupts - Enable the interrupts from the PHY side |
| 1424 |
* @phydev: target phy_device struct |
| 1425 |
*/ |
| 1426 |
static int phy_enable_interrupts(struct phy_device *phydev) |
| 1427 |
{ |
| 1428 |
return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); |
| 1429 |
} |
| 1430 |
|
| 1431 |
/** |
| 1432 |
* phy_update_stats - Update PHY device statistics if supported. |
| 1433 |
* @phydev: Pointer to the PHY device structure. |
| 1434 |
* |
| 1435 |
* If the PHY driver provides an update_stats callback, this function |
| 1436 |
* invokes it to update the PHY statistics. If not, it returns 0. |
| 1437 |
* |
| 1438 |
* Return: 0 on success, or a negative error code if the callback fails. |
| 1439 |
*/ |
| 1440 |
static int phy_update_stats(struct phy_device *phydev) |
| 1441 |
{ |
| 1442 |
if (!phydev->drv->update_stats) |
| 1443 |
return 0; |
| 1444 |
|
| 1445 |
return phydev->drv->update_stats(phydev); |
| 1446 |
} |
| 1447 |
|
| 1448 |
/** |
| 1449 |
* phy_request_interrupt - request and enable interrupt for a PHY device |
| 1450 |
* @phydev: target phy_device struct |
| 1451 |
* |
| 1452 |
* Description: Request and enable the interrupt for the given PHY. |
| 1453 |
* If this fails, then we set irq to PHY_POLL. |
| 1454 |
* This should only be called with a valid IRQ number. |
| 1455 |
*/ |
| 1456 |
void phy_request_interrupt(struct phy_device *phydev) |
| 1457 |
{ |
| 1458 |
int err; |
| 1459 |
|
| 1460 |
err = request_threaded_irq(phydev->irq, NULL, phy_interrupt, |
| 1461 |
IRQF_ONESHOT | IRQF_SHARED, |
| 1462 |
phydev_name(phydev), phydev); |
| 1463 |
if (err) { |
| 1464 |
phydev_warn(phydev, "Error %d requesting IRQ %d, falling back to polling\n", |
| 1465 |
err, phydev->irq); |
| 1466 |
phydev->irq = PHY_POLL; |
| 1467 |
} else { |
| 1468 |
if (phy_enable_interrupts(phydev)) { |
| 1469 |
phydev_warn(phydev, "Can't enable interrupt, falling back to polling\n"); |
| 1470 |
phy_free_interrupt(phydev); |
| 1471 |
phydev->irq = PHY_POLL; |
| 1472 |
} |
| 1473 |
} |
| 1474 |
} |
| 1475 |
EXPORT_SYMBOL(phy_request_interrupt); |
| 1476 |
|
| 1477 |
/** |
| 1478 |
* phy_free_interrupt - disable and free interrupt for a PHY device |
| 1479 |
* @phydev: target phy_device struct |
| 1480 |
* |
| 1481 |
* Description: Disable and free the interrupt for the given PHY. |
| 1482 |
* This should only be called with a valid IRQ number. |
| 1483 |
*/ |
| 1484 |
void phy_free_interrupt(struct phy_device *phydev) |
| 1485 |
{ |
| 1486 |
phy_disable_interrupts(phydev); |
| 1487 |
free_irq(phydev->irq, phydev); |
| 1488 |
} |
| 1489 |
EXPORT_SYMBOL(phy_free_interrupt); |
| 1490 |
|
| 1491 |
/** |
| 1492 |
* phy_get_next_update_time - Determine the next PHY update time |
| 1493 |
* @phydev: Pointer to the phy_device structure |
| 1494 |
* |
| 1495 |
* This function queries the PHY driver to get the time for the next polling |
| 1496 |
* event. If the driver does not implement the callback, a default value is |
| 1497 |
* used. |
| 1498 |
* |
| 1499 |
* Return: The time for the next polling event in jiffies |
| 1500 |
*/ |
| 1501 |
static unsigned int phy_get_next_update_time(struct phy_device *phydev) |
| 1502 |
{ |
| 1503 |
if (phydev->drv && phydev->drv->get_next_update_time) |
| 1504 |
return phydev->drv->get_next_update_time(phydev); |
| 1505 |
|
| 1506 |
return PHY_STATE_TIME; |
| 1507 |
} |
| 1508 |
|
| 1509 |
enum phy_state_work { |
| 1510 |
PHY_STATE_WORK_NONE, |
| 1511 |
PHY_STATE_WORK_ANEG, |
| 1512 |
PHY_STATE_WORK_SUSPEND, |
| 1513 |
}; |
| 1514 |
|
| 1515 |
static enum phy_state_work _phy_state_machine(struct phy_device *phydev) |
| 1516 |
{ |
| 1517 |
enum phy_state_work state_work = PHY_STATE_WORK_NONE; |
| 1518 |
struct net_device *dev = phydev->attached_dev; |
| 1519 |
enum phy_state old_state = phydev->state; |
| 1520 |
const void *func = NULL; |
| 1521 |
bool finished = false; |
| 1522 |
int err = 0; |
| 1523 |
|
| 1524 |
switch (phydev->state) { |
| 1525 |
case PHY_DOWN: |
| 1526 |
case PHY_READY: |
| 1527 |
break; |
| 1528 |
case PHY_UP: |
| 1529 |
state_work = PHY_STATE_WORK_ANEG; |
| 1530 |
break; |
| 1531 |
case PHY_NOLINK: |
| 1532 |
case PHY_RUNNING: |
| 1533 |
err = phy_check_link_status(phydev); |
| 1534 |
func = &phy_check_link_status; |
| 1535 |
|
| 1536 |
if (!err) |
| 1537 |
err = phy_update_stats(phydev); |
| 1538 |
break; |
| 1539 |
case PHY_CABLETEST: |
| 1540 |
err = phydev->drv->cable_test_get_status(phydev, &finished); |
| 1541 |
if (err) { |
| 1542 |
phy_abort_cable_test(phydev); |
| 1543 |
netif_testing_off(dev); |
| 1544 |
state_work = PHY_STATE_WORK_ANEG; |
| 1545 |
phydev->state = PHY_UP; |
| 1546 |
break; |
| 1547 |
} |
| 1548 |
|
| 1549 |
if (finished) { |
| 1550 |
ethnl_cable_test_finished(phydev); |
| 1551 |
netif_testing_off(dev); |
| 1552 |
state_work = PHY_STATE_WORK_ANEG; |
| 1553 |
phydev->state = PHY_UP; |
| 1554 |
} |
| 1555 |
break; |
| 1556 |
case PHY_HALTED: |
| 1557 |
if (phydev->link) { |
| 1558 |
if (phydev->autoneg == AUTONEG_ENABLE) { |
| 1559 |
phydev->speed = SPEED_UNKNOWN; |
| 1560 |
phydev->duplex = DUPLEX_UNKNOWN; |
| 1561 |
} |
| 1562 |
if (phydev->master_slave_state != |
| 1563 |
MASTER_SLAVE_STATE_UNSUPPORTED) |
| 1564 |
phydev->master_slave_state = |
| 1565 |
MASTER_SLAVE_STATE_UNKNOWN; |
| 1566 |
phydev->mdix = ETH_TP_MDI_INVALID; |
| 1567 |
linkmode_zero(phydev->lp_advertising); |
| 1568 |
} |
| 1569 |
fallthrough; |
| 1570 |
case PHY_ERROR: |
| 1571 |
if (phydev->link) { |
| 1572 |
phydev->link = 0; |
| 1573 |
phydev->eee_active = false; |
| 1574 |
phydev->enable_tx_lpi = false; |
| 1575 |
phy_link_down(phydev); |
| 1576 |
} |
| 1577 |
state_work = PHY_STATE_WORK_SUSPEND; |
| 1578 |
break; |
| 1579 |
} |
| 1580 |
|
| 1581 |
if (state_work == PHY_STATE_WORK_ANEG) { |
| 1582 |
err = _phy_start_aneg(phydev); |
| 1583 |
func = &_phy_start_aneg; |
| 1584 |
} |
| 1585 |
|
| 1586 |
if (err == -ENODEV) |
| 1587 |
return state_work; |
| 1588 |
|
| 1589 |
if (err < 0) |
| 1590 |
phy_error_precise(phydev, func, err); |
| 1591 |
|
| 1592 |
phy_process_state_change(phydev, old_state); |
| 1593 |
|
| 1594 |
/* Only re-schedule a PHY state machine change if we are polling the |
| 1595 |
* PHY, if PHY_MAC_INTERRUPT is set, then we will be moving |
| 1596 |
* between states from phy_mac_interrupt(). |
| 1597 |
* |
| 1598 |
* In state PHY_HALTED the PHY gets suspended, so rescheduling the |
| 1599 |
* state machine would be pointless and possibly error prone when |
| 1600 |
* called from phy_disconnect() synchronously. |
| 1601 |
*/ |
| 1602 |
if (phy_polling_mode(phydev) && phy_is_started(phydev)) |
| 1603 |
phy_queue_state_machine(phydev, |
| 1604 |
phy_get_next_update_time(phydev)); |
| 1605 |
|
| 1606 |
return state_work; |
| 1607 |
} |
| 1608 |
|
| 1609 |
/* unlocked part of the PHY state machine */ |
| 1610 |
static void _phy_state_machine_post_work(struct phy_device *phydev, |
| 1611 |
enum phy_state_work state_work) |
| 1612 |
{ |
| 1613 |
if (state_work == PHY_STATE_WORK_SUSPEND) |
| 1614 |
phy_suspend(phydev); |
| 1615 |
} |
| 1616 |
|
| 1617 |
/** |
| 1618 |
* phy_state_machine - Handle the state machine |
| 1619 |
* @work: work_struct that describes the work to be done |
| 1620 |
*/ |
| 1621 |
void phy_state_machine(struct work_struct *work) |
| 1622 |
{ |
| 1623 |
struct delayed_work *dwork = to_delayed_work(work); |
| 1624 |
struct phy_device *phydev = |
| 1625 |
container_of(dwork, struct phy_device, state_queue); |
| 1626 |
enum phy_state_work state_work; |
| 1627 |
|
| 1628 |
mutex_lock(&phydev->lock); |
| 1629 |
state_work = _phy_state_machine(phydev); |
| 1630 |
mutex_unlock(&phydev->lock); |
| 1631 |
|
| 1632 |
_phy_state_machine_post_work(phydev, state_work); |
| 1633 |
} |
| 1634 |
|
| 1635 |
/** |
| 1636 |
* phy_stop - Bring down the PHY link, and stop checking the status |
| 1637 |
* @phydev: target phy_device struct |
| 1638 |
*/ |
| 1639 |
void phy_stop(struct phy_device *phydev) |
| 1640 |
{ |
| 1641 |
struct net_device *dev = phydev->attached_dev; |
| 1642 |
enum phy_state_work state_work; |
| 1643 |
enum phy_state old_state; |
| 1644 |
|
| 1645 |
if (!phy_is_started(phydev) && phydev->state != PHY_DOWN && |
| 1646 |
phydev->state != PHY_ERROR) { |
| 1647 |
WARN(1, "called from state %s\n", |
| 1648 |
phy_state_to_str(phydev->state)); |
| 1649 |
return; |
| 1650 |
} |
| 1651 |
|
| 1652 |
mutex_lock(&phydev->lock); |
| 1653 |
old_state = phydev->state; |
| 1654 |
|
| 1655 |
if (phydev->state == PHY_CABLETEST) { |
| 1656 |
phy_abort_cable_test(phydev); |
| 1657 |
netif_testing_off(dev); |
| 1658 |
} |
| 1659 |
|
| 1660 |
if (phydev->sfp_bus) |
| 1661 |
sfp_upstream_stop(phydev->sfp_bus); |
| 1662 |
|
| 1663 |
phydev->state = PHY_HALTED; |
| 1664 |
phy_process_state_change(phydev, old_state); |
| 1665 |
|
| 1666 |
state_work = _phy_state_machine(phydev); |
| 1667 |
mutex_unlock(&phydev->lock); |
| 1668 |
|
| 1669 |
_phy_state_machine_post_work(phydev, state_work); |
| 1670 |
phy_stop_machine(phydev); |
| 1671 |
|
| 1672 |
/* Cannot call flush_scheduled_work() here as desired because |
| 1673 |
* of rtnl_lock(), but PHY_HALTED shall guarantee irq handler |
| 1674 |
* will not reenable interrupts. |
| 1675 |
*/ |
| 1676 |
} |
| 1677 |
EXPORT_SYMBOL(phy_stop); |
| 1678 |
|
| 1679 |
/** |
| 1680 |
* phy_start - start or restart a PHY device |
| 1681 |
* @phydev: target phy_device struct |
| 1682 |
* |
| 1683 |
* Description: Indicates the attached device's readiness to |
| 1684 |
* handle PHY-related work. Used during startup to start the |
| 1685 |
* PHY, and after a call to phy_stop() to resume operation. |
| 1686 |
* Also used to indicate the MDIO bus has cleared an error |
| 1687 |
* condition. |
| 1688 |
*/ |
| 1689 |
void phy_start(struct phy_device *phydev) |
| 1690 |
{ |
| 1691 |
mutex_lock(&phydev->lock); |
| 1692 |
|
| 1693 |
if (phydev->state != PHY_READY && phydev->state != PHY_HALTED) { |
| 1694 |
WARN(1, "called from state %s\n", |
| 1695 |
phy_state_to_str(phydev->state)); |
| 1696 |
goto out; |
| 1697 |
} |
| 1698 |
|
| 1699 |
if (phydev->sfp_bus) |
| 1700 |
sfp_upstream_start(phydev->sfp_bus); |
| 1701 |
|
| 1702 |
/* if phy was suspended, bring the physical link up again */ |
| 1703 |
__phy_resume(phydev); |
| 1704 |
|
| 1705 |
phydev->state = PHY_UP; |
| 1706 |
|
| 1707 |
phy_start_machine(phydev); |
| 1708 |
out: |
| 1709 |
mutex_unlock(&phydev->lock); |
| 1710 |
} |
| 1711 |
EXPORT_SYMBOL(phy_start); |
| 1712 |
|
| 1713 |
/** |
| 1714 |
* phy_mac_interrupt - MAC says the link has changed |
| 1715 |
* @phydev: phy_device struct with changed link |
| 1716 |
* |
| 1717 |
* The MAC layer is able to indicate there has been a change in the PHY link |
| 1718 |
* status. Trigger the state machine and work a work queue. |
| 1719 |
*/ |
| 1720 |
void phy_mac_interrupt(struct phy_device *phydev) |
| 1721 |
{ |
| 1722 |
/* Trigger a state machine change */ |
| 1723 |
phy_trigger_machine(phydev); |
| 1724 |
} |
| 1725 |
EXPORT_SYMBOL(phy_mac_interrupt); |
| 1726 |
|
| 1727 |
/** |
| 1728 |
* phy_loopback - Configure loopback mode of PHY |
| 1729 |
* @phydev: target phy_device struct |
| 1730 |
* @enable: enable or disable loopback mode |
| 1731 |
* @speed: enable loopback mode with speed |
| 1732 |
* |
| 1733 |
* Configure loopback mode of PHY and signal link down and link up if speed is |
| 1734 |
* changing. |
| 1735 |
* |
| 1736 |
* Return: 0 on success, negative error code on failure. |
| 1737 |
*/ |
| 1738 |
int phy_loopback(struct phy_device *phydev, bool enable, int speed) |
| 1739 |
{ |
| 1740 |
bool link_up = false; |
| 1741 |
int ret = 0; |
| 1742 |
|
| 1743 |
if (!phydev->drv) |
| 1744 |
return -EIO; |
| 1745 |
|
| 1746 |
mutex_lock(&phydev->lock); |
| 1747 |
|
| 1748 |
if (enable && phydev->loopback_enabled) { |
| 1749 |
ret = -EBUSY; |
| 1750 |
goto out; |
| 1751 |
} |
| 1752 |
|
| 1753 |
if (!enable && !phydev->loopback_enabled) { |
| 1754 |
ret = -EINVAL; |
| 1755 |
goto out; |
| 1756 |
} |
| 1757 |
|
| 1758 |
if (enable) { |
| 1759 |
/* |
| 1760 |
* Link up is signaled with a defined speed. If speed changes, |
| 1761 |
* then first link down and after that link up needs to be |
| 1762 |
* signaled. |
| 1763 |
*/ |
| 1764 |
if (phydev->link && phydev->state == PHY_RUNNING) { |
| 1765 |
/* link is up and signaled */ |
| 1766 |
if (speed && phydev->speed != speed) { |
| 1767 |
/* signal link down and up for new speed */ |
| 1768 |
phydev->link = false; |
| 1769 |
phydev->state = PHY_NOLINK; |
| 1770 |
phy_link_down(phydev); |
| 1771 |
|
| 1772 |
link_up = true; |
| 1773 |
} |
| 1774 |
} else { |
| 1775 |
/* link is not signaled */ |
| 1776 |
if (speed) { |
| 1777 |
/* signal link up for new speed */ |
| 1778 |
link_up = true; |
| 1779 |
} |
| 1780 |
} |
| 1781 |
} |
| 1782 |
|
| 1783 |
if (phydev->drv->set_loopback) |
| 1784 |
ret = phydev->drv->set_loopback(phydev, enable, speed); |
| 1785 |
else |
| 1786 |
ret = genphy_loopback(phydev, enable, speed); |
| 1787 |
|
| 1788 |
if (ret) { |
| 1789 |
if (enable) { |
| 1790 |
/* try to restore link if enabling loopback fails */ |
| 1791 |
if (phydev->drv->set_loopback) |
| 1792 |
phydev->drv->set_loopback(phydev, false, 0); |
| 1793 |
else |
| 1794 |
genphy_loopback(phydev, false, 0); |
| 1795 |
} |
| 1796 |
|
| 1797 |
goto out; |
| 1798 |
} |
| 1799 |
|
| 1800 |
if (link_up) { |
| 1801 |
phydev->link = true; |
| 1802 |
phydev->state = PHY_RUNNING; |
| 1803 |
phy_link_up(phydev); |
| 1804 |
} |
| 1805 |
|
| 1806 |
phydev->loopback_enabled = enable; |
| 1807 |
|
| 1808 |
out: |
| 1809 |
mutex_unlock(&phydev->lock); |
| 1810 |
return ret; |
| 1811 |
} |
| 1812 |
EXPORT_SYMBOL(phy_loopback); |
| 1813 |
|
| 1814 |
/** |
| 1815 |
* phy_eee_tx_clock_stop_capable() - indicate whether the MAC can stop tx clock |
| 1816 |
* @phydev: target phy_device struct |
| 1817 |
* |
| 1818 |
* Indicate whether the MAC can disable the transmit xMII clock while in LPI |
| 1819 |
* state. Returns 1 if the MAC may stop the transmit clock, 0 if the MAC must |
| 1820 |
* not stop the transmit clock, or negative error. |
| 1821 |
*/ |
| 1822 |
int phy_eee_tx_clock_stop_capable(struct phy_device *phydev) |
| 1823 |
{ |
| 1824 |
int stat1; |
| 1825 |
|
| 1826 |
stat1 = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1); |
| 1827 |
if (stat1 < 0) |
| 1828 |
return stat1; |
| 1829 |
|
| 1830 |
return !!(stat1 & MDIO_PCS_STAT1_CLKSTOP_CAP); |
| 1831 |
} |
| 1832 |
EXPORT_SYMBOL_GPL(phy_eee_tx_clock_stop_capable); |
| 1833 |
|
| 1834 |
/** |
| 1835 |
* phy_eee_rx_clock_stop() - configure PHY receive clock in LPI |
| 1836 |
* @phydev: target phy_device struct |
| 1837 |
* @clk_stop_enable: flag to indicate whether the clock can be stopped |
| 1838 |
* |
| 1839 |
* Configure whether the PHY can disable its receive clock during LPI mode, |
| 1840 |
* See IEEE 802.3 sections 22.2.2.2, 35.2.2.10, and 45.2.3.1.4. |
| 1841 |
* |
| 1842 |
* Returns: 0 or negative error. |
| 1843 |
*/ |
| 1844 |
int phy_eee_rx_clock_stop(struct phy_device *phydev, bool clk_stop_enable) |
| 1845 |
{ |
| 1846 |
/* Configure the PHY to stop receiving xMII |
| 1847 |
* clock while it is signaling LPI. |
| 1848 |
*/ |
| 1849 |
return phy_modify_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, |
| 1850 |
MDIO_PCS_CTRL1_CLKSTOP_EN, |
| 1851 |
clk_stop_enable ? MDIO_PCS_CTRL1_CLKSTOP_EN : 0); |
| 1852 |
} |
| 1853 |
EXPORT_SYMBOL_GPL(phy_eee_rx_clock_stop); |
| 1854 |
|
| 1855 |
/** |
| 1856 |
* phy_init_eee - init and check the EEE feature |
| 1857 |
* @phydev: target phy_device struct |
| 1858 |
* @clk_stop_enable: PHY may stop the clock during LPI |
| 1859 |
* |
| 1860 |
* Description: it checks if the Energy-Efficient Ethernet (EEE) |
| 1861 |
* is supported by looking at the MMD registers 3.20 and 7.60/61 |
| 1862 |
* and it programs the MMD register 3.0 setting the "Clock stop enable" |
| 1863 |
* bit if required. |
| 1864 |
*/ |
| 1865 |
int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) |
| 1866 |
{ |
| 1867 |
int ret; |
| 1868 |
|
| 1869 |
if (!phydev->drv) |
| 1870 |
return -EIO; |
| 1871 |
|
| 1872 |
ret = genphy_c45_eee_is_active(phydev, NULL); |
| 1873 |
if (ret < 0) |
| 1874 |
return ret; |
| 1875 |
if (!ret) |
| 1876 |
return -EPROTONOSUPPORT; |
| 1877 |
|
| 1878 |
if (clk_stop_enable) |
| 1879 |
ret = phy_eee_rx_clock_stop(phydev, true); |
| 1880 |
|
| 1881 |
return ret < 0 ? ret : 0; |
| 1882 |
} |
| 1883 |
EXPORT_SYMBOL(phy_init_eee); |
| 1884 |
|
| 1885 |
/** |
| 1886 |
* phy_get_eee_err - report the EEE wake error count |
| 1887 |
* @phydev: target phy_device struct |
| 1888 |
* |
| 1889 |
* Description: it is to report the number of time where the PHY |
| 1890 |
* failed to complete its normal wake sequence. |
| 1891 |
*/ |
| 1892 |
int phy_get_eee_err(struct phy_device *phydev) |
| 1893 |
{ |
| 1894 |
int ret; |
| 1895 |
|
| 1896 |
if (!phydev->drv) |
| 1897 |
return -EIO; |
| 1898 |
|
| 1899 |
mutex_lock(&phydev->lock); |
| 1900 |
ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR); |
| 1901 |
mutex_unlock(&phydev->lock); |
| 1902 |
|
| 1903 |
return ret; |
| 1904 |
} |
| 1905 |
EXPORT_SYMBOL(phy_get_eee_err); |
| 1906 |
|
| 1907 |
/** |
| 1908 |
* phy_ethtool_get_eee - get EEE supported and status |
| 1909 |
* @phydev: target phy_device struct |
| 1910 |
* @data: ethtool_keee data |
| 1911 |
* |
| 1912 |
* Description: get the current EEE settings, filling in all members of |
| 1913 |
* @data. |
| 1914 |
*/ |
| 1915 |
int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_keee *data) |
| 1916 |
{ |
| 1917 |
int ret; |
| 1918 |
|
| 1919 |
if (!phydev->drv) |
| 1920 |
return -EIO; |
| 1921 |
|
| 1922 |
mutex_lock(&phydev->lock); |
| 1923 |
ret = genphy_c45_ethtool_get_eee(phydev, data); |
| 1924 |
eeecfg_to_eee(data, &phydev->eee_cfg); |
| 1925 |
mutex_unlock(&phydev->lock); |
| 1926 |
|
| 1927 |
return ret; |
| 1928 |
} |
| 1929 |
EXPORT_SYMBOL(phy_ethtool_get_eee); |
| 1930 |
|
| 1931 |
/** |
| 1932 |
* phy_ethtool_set_eee_noneg - Adjusts MAC LPI configuration without PHY |
| 1933 |
* renegotiation |
| 1934 |
* @phydev: pointer to the target PHY device structure |
| 1935 |
* @old_cfg: pointer to the eee_config structure containing the old EEE settings |
| 1936 |
* |
| 1937 |
* This function updates the Energy Efficient Ethernet (EEE) configuration |
| 1938 |
* for cases where only the MAC's Low Power Idle (LPI) configuration changes, |
| 1939 |
* without triggering PHY renegotiation. It ensures that the MAC is properly |
| 1940 |
* informed of the new LPI settings by cycling the link down and up, which |
| 1941 |
* is necessary for the MAC to adopt the new configuration. This adjustment |
| 1942 |
* is done only if there is a change in the tx_lpi_enabled or tx_lpi_timer |
| 1943 |
* configuration. |
| 1944 |
*/ |
| 1945 |
static void phy_ethtool_set_eee_noneg(struct phy_device *phydev, |
| 1946 |
const struct eee_config *old_cfg) |
| 1947 |
{ |
| 1948 |
bool enable_tx_lpi; |
| 1949 |
|
| 1950 |
if (!phydev->link) |
| 1951 |
return; |
| 1952 |
|
| 1953 |
enable_tx_lpi = phydev->eee_cfg.tx_lpi_enabled && phydev->eee_active; |
| 1954 |
|
| 1955 |
if (phydev->enable_tx_lpi != enable_tx_lpi || |
| 1956 |
phydev->eee_cfg.tx_lpi_timer != old_cfg->tx_lpi_timer) { |
| 1957 |
phydev->enable_tx_lpi = false; |
| 1958 |
phydev->link = false; |
| 1959 |
phy_link_down(phydev); |
| 1960 |
phydev->enable_tx_lpi = enable_tx_lpi; |
| 1961 |
phydev->link = true; |
| 1962 |
phy_link_up(phydev); |
| 1963 |
} |
| 1964 |
} |
| 1965 |
|
| 1966 |
/** |
| 1967 |
* phy_ethtool_set_eee - set EEE supported and status |
| 1968 |
* @phydev: target phy_device struct |
| 1969 |
* @data: ethtool_keee data |
| 1970 |
* |
| 1971 |
* Description: it is to program the Advertisement EEE register. |
| 1972 |
*/ |
| 1973 |
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_keee *data) |
| 1974 |
{ |
| 1975 |
struct eee_config old_cfg; |
| 1976 |
int ret; |
| 1977 |
|
| 1978 |
if (!phydev->drv) |
| 1979 |
return -EIO; |
| 1980 |
|
| 1981 |
mutex_lock(&phydev->lock); |
| 1982 |
|
| 1983 |
old_cfg = phydev->eee_cfg; |
| 1984 |
eee_to_eeecfg(&phydev->eee_cfg, data); |
| 1985 |
|
| 1986 |
ret = genphy_c45_ethtool_set_eee(phydev, data); |
| 1987 |
if (ret == 0) |
| 1988 |
phy_ethtool_set_eee_noneg(phydev, &old_cfg); |
| 1989 |
else if (ret < 0) |
| 1990 |
phydev->eee_cfg = old_cfg; |
| 1991 |
|
| 1992 |
mutex_unlock(&phydev->lock); |
| 1993 |
|
| 1994 |
return ret < 0 ? ret : 0; |
| 1995 |
} |
| 1996 |
EXPORT_SYMBOL(phy_ethtool_set_eee); |
| 1997 |
|
| 1998 |
/** |
| 1999 |
* phy_ethtool_set_wol - Configure Wake On LAN |
| 2000 |
* |
| 2001 |
* @phydev: target phy_device struct |
| 2002 |
* @wol: Configuration requested |
| 2003 |
*/ |
| 2004 |
int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) |
| 2005 |
{ |
| 2006 |
int ret; |
| 2007 |
|
| 2008 |
if (phydev->drv && phydev->drv->set_wol) { |
| 2009 |
mutex_lock(&phydev->lock); |
| 2010 |
ret = phydev->drv->set_wol(phydev, wol); |
| 2011 |
mutex_unlock(&phydev->lock); |
| 2012 |
|
| 2013 |
return ret; |
| 2014 |
} |
| 2015 |
|
| 2016 |
return -EOPNOTSUPP; |
| 2017 |
} |
| 2018 |
EXPORT_SYMBOL(phy_ethtool_set_wol); |
| 2019 |
|
| 2020 |
/** |
| 2021 |
* phy_ethtool_get_wol - Get the current Wake On LAN configuration |
| 2022 |
* |
| 2023 |
* @phydev: target phy_device struct |
| 2024 |
* @wol: Store the current configuration here |
| 2025 |
*/ |
| 2026 |
void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) |
| 2027 |
{ |
| 2028 |
if (phydev->drv && phydev->drv->get_wol) { |
| 2029 |
mutex_lock(&phydev->lock); |
| 2030 |
phydev->drv->get_wol(phydev, wol); |
| 2031 |
mutex_unlock(&phydev->lock); |
| 2032 |
} |
| 2033 |
} |
| 2034 |
EXPORT_SYMBOL(phy_ethtool_get_wol); |
| 2035 |
|
| 2036 |
int phy_ethtool_get_link_ksettings(struct net_device *ndev, |
| 2037 |
struct ethtool_link_ksettings *cmd) |
| 2038 |
{ |
| 2039 |
struct phy_device *phydev = ndev->phydev; |
| 2040 |
|
| 2041 |
if (!phydev) |
| 2042 |
return -ENODEV; |
| 2043 |
|
| 2044 |
phy_ethtool_ksettings_get(phydev, cmd); |
| 2045 |
|
| 2046 |
return 0; |
| 2047 |
} |
| 2048 |
EXPORT_SYMBOL(phy_ethtool_get_link_ksettings); |
| 2049 |
|
| 2050 |
int phy_ethtool_set_link_ksettings(struct net_device *ndev, |
| 2051 |
const struct ethtool_link_ksettings *cmd) |
| 2052 |
{ |
| 2053 |
struct phy_device *phydev = ndev->phydev; |
| 2054 |
|
| 2055 |
if (!phydev) |
| 2056 |
return -ENODEV; |
| 2057 |
|
| 2058 |
return phy_ethtool_ksettings_set(phydev, cmd); |
| 2059 |
} |
| 2060 |
EXPORT_SYMBOL(phy_ethtool_set_link_ksettings); |
| 2061 |
|
| 2062 |
/** |
| 2063 |
* phy_ethtool_nway_reset - Restart auto negotiation |
| 2064 |
* @ndev: Network device to restart autoneg for |
| 2065 |
*/ |
| 2066 |
int phy_ethtool_nway_reset(struct net_device *ndev) |
| 2067 |
{ |
| 2068 |
struct phy_device *phydev = ndev->phydev; |
| 2069 |
int ret; |
| 2070 |
|
| 2071 |
if (!phydev) |
| 2072 |
return -ENODEV; |
| 2073 |
|
| 2074 |
if (!phydev->drv) |
| 2075 |
return -EIO; |
| 2076 |
|
| 2077 |
mutex_lock(&phydev->lock); |
| 2078 |
ret = phy_restart_aneg(phydev); |
| 2079 |
mutex_unlock(&phydev->lock); |
| 2080 |
|
| 2081 |
return ret; |
| 2082 |
} |
| 2083 |
EXPORT_SYMBOL(phy_ethtool_nway_reset); |