| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* Driver for Broadcom 63xx SOCs integrated PHYs |
| 4 |
*/ |
| 5 |
#include "bcm-phy-lib.h" |
| 6 |
#include <linux/module.h> |
| 7 |
#include <linux/phy.h> |
| 8 |
|
| 9 |
#define MII_BCM63XX_IR 0x1a /* interrupt register */ |
| 10 |
#define MII_BCM63XX_IR_EN 0x4000 /* global interrupt enable */ |
| 11 |
#define MII_BCM63XX_IR_DUPLEX 0x0800 /* duplex changed */ |
| 12 |
#define MII_BCM63XX_IR_SPEED 0x0400 /* speed changed */ |
| 13 |
#define MII_BCM63XX_IR_LINK 0x0200 /* link changed */ |
| 14 |
#define MII_BCM63XX_IR_GMASK 0x0100 /* global interrupt mask */ |
| 15 |
|
| 16 |
MODULE_DESCRIPTION("Broadcom 63xx internal PHY driver"); |
| 17 |
MODULE_AUTHOR("Maxime Bizon <[email protected]>"); |
| 18 |
MODULE_LICENSE("GPL"); |
| 19 |
|
| 20 |
static int bcm63xx_config_intr(struct phy_device *phydev) |
| 21 |
{ |
| 22 |
int reg, err; |
| 23 |
|
| 24 |
reg = phy_read(phydev, MII_BCM63XX_IR); |
| 25 |
if (reg < 0) |
| 26 |
return reg; |
| 27 |
|
| 28 |
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { |
| 29 |
err = bcm_phy_ack_intr(phydev); |
| 30 |
if (err) |
| 31 |
return err; |
| 32 |
|
| 33 |
reg &= ~MII_BCM63XX_IR_GMASK; |
| 34 |
err = phy_write(phydev, MII_BCM63XX_IR, reg); |
| 35 |
} else { |
| 36 |
reg |= MII_BCM63XX_IR_GMASK; |
| 37 |
err = phy_write(phydev, MII_BCM63XX_IR, reg); |
| 38 |
if (err) |
| 39 |
return err; |
| 40 |
|
| 41 |
err = bcm_phy_ack_intr(phydev); |
| 42 |
} |
| 43 |
|
| 44 |
return err; |
| 45 |
} |
| 46 |
|
| 47 |
static int bcm63xx_config_init(struct phy_device *phydev) |
| 48 |
{ |
| 49 |
int reg, err; |
| 50 |
|
| 51 |
/* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */ |
| 52 |
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported); |
| 53 |
|
| 54 |
reg = phy_read(phydev, MII_BCM63XX_IR); |
| 55 |
if (reg < 0) |
| 56 |
return reg; |
| 57 |
|
| 58 |
/* Mask interrupts globally. */ |
| 59 |
reg |= MII_BCM63XX_IR_GMASK; |
| 60 |
err = phy_write(phydev, MII_BCM63XX_IR, reg); |
| 61 |
if (err < 0) |
| 62 |
return err; |
| 63 |
|
| 64 |
/* Unmask events we are interested in */ |
| 65 |
reg = ~(MII_BCM63XX_IR_DUPLEX | |
| 66 |
MII_BCM63XX_IR_SPEED | |
| 67 |
MII_BCM63XX_IR_LINK) | |
| 68 |
MII_BCM63XX_IR_EN; |
| 69 |
return phy_write(phydev, MII_BCM63XX_IR, reg); |
| 70 |
} |
| 71 |
|
| 72 |
static struct phy_driver bcm63xx_driver[] = { |
| 73 |
{ |
| 74 |
.phy_id = 0x00406000, |
| 75 |
.phy_id_mask = 0xfffffc00, |
| 76 |
.name = "Broadcom BCM63XX (1)", |
| 77 |
/* PHY_BASIC_FEATURES */ |
| 78 |
.flags = PHY_IS_INTERNAL, |
| 79 |
.config_init = bcm63xx_config_init, |
| 80 |
.config_intr = bcm63xx_config_intr, |
| 81 |
.handle_interrupt = bcm_phy_handle_interrupt, |
| 82 |
}, { |
| 83 |
/* same phy as above, with just a different OUI */ |
| 84 |
.phy_id = 0x002bdc00, |
| 85 |
.phy_id_mask = 0xfffffc00, |
| 86 |
.name = "Broadcom BCM63XX (2)", |
| 87 |
/* PHY_BASIC_FEATURES */ |
| 88 |
.flags = PHY_IS_INTERNAL, |
| 89 |
.config_init = bcm63xx_config_init, |
| 90 |
.config_intr = bcm63xx_config_intr, |
| 91 |
.handle_interrupt = bcm_phy_handle_interrupt, |
| 92 |
} }; |
| 93 |
|
| 94 |
module_phy_driver(bcm63xx_driver); |
| 95 |
|
| 96 |
static const struct mdio_device_id __maybe_unused bcm63xx_tbl[] = { |
| 97 |
{ 0x00406000, 0xfffffc00 }, |
| 98 |
{ 0x002bdc00, 0xfffffc00 }, |
| 99 |
{ } |
| 100 |
}; |
| 101 |
|
| 102 |
MODULE_DEVICE_TABLE(mdio, bcm63xx_tbl); |