| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* drivers/net/phy/et1011c.c |
| 4 |
* |
| 5 |
* Driver for LSI ET1011C PHYs |
| 6 |
* |
| 7 |
* Author: Chaithrika U S |
| 8 |
* |
| 9 |
* Copyright (c) 2008 Texas Instruments |
| 10 |
*/ |
| 11 |
#include <linux/kernel.h> |
| 12 |
#include <linux/string.h> |
| 13 |
#include <linux/errno.h> |
| 14 |
#include <linux/unistd.h> |
| 15 |
#include <linux/interrupt.h> |
| 16 |
#include <linux/init.h> |
| 17 |
#include <linux/delay.h> |
| 18 |
#include <linux/netdevice.h> |
| 19 |
#include <linux/etherdevice.h> |
| 20 |
#include <linux/skbuff.h> |
| 21 |
#include <linux/spinlock.h> |
| 22 |
#include <linux/mm.h> |
| 23 |
#include <linux/module.h> |
| 24 |
#include <linux/mii.h> |
| 25 |
#include <linux/ethtool.h> |
| 26 |
#include <linux/phy.h> |
| 27 |
#include <linux/io.h> |
| 28 |
#include <linux/uaccess.h> |
| 29 |
#include <asm/irq.h> |
| 30 |
|
| 31 |
#define ET1011C_STATUS_REG (0x1A) |
| 32 |
#define ET1011C_CONFIG_REG (0x16) |
| 33 |
#define ET1011C_SPEED_MASK (0x0300) |
| 34 |
#define ET1011C_GIGABIT_SPEED (0x0200) |
| 35 |
#define ET1011C_TX_FIFO_MASK (0x3000) |
| 36 |
#define ET1011C_TX_FIFO_DEPTH_8 (0x0000) |
| 37 |
#define ET1011C_TX_FIFO_DEPTH_16 (0x1000) |
| 38 |
#define ET1011C_INTERFACE_MASK (0x0007) |
| 39 |
#define ET1011C_GMII_INTERFACE (0x0002) |
| 40 |
#define ET1011C_SYS_CLK_EN (0x01 << 4) |
| 41 |
|
| 42 |
|
| 43 |
MODULE_DESCRIPTION("LSI ET1011C PHY driver"); |
| 44 |
MODULE_AUTHOR("Chaithrika U S"); |
| 45 |
MODULE_LICENSE("GPL"); |
| 46 |
|
| 47 |
static int et1011c_config_aneg(struct phy_device *phydev) |
| 48 |
{ |
| 49 |
int ctl = phy_read(phydev, MII_BMCR); |
| 50 |
|
| 51 |
if (ctl < 0) |
| 52 |
return ctl; |
| 53 |
ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | |
| 54 |
BMCR_ANENABLE); |
| 55 |
/* First clear the PHY */ |
| 56 |
phy_write(phydev, MII_BMCR, ctl | BMCR_RESET); |
| 57 |
|
| 58 |
return genphy_config_aneg(phydev); |
| 59 |
} |
| 60 |
|
| 61 |
static int et1011c_read_status(struct phy_device *phydev) |
| 62 |
{ |
| 63 |
static int speed; |
| 64 |
int ret; |
| 65 |
u32 val; |
| 66 |
|
| 67 |
ret = genphy_read_status(phydev); |
| 68 |
|
| 69 |
if (speed != phydev->speed) { |
| 70 |
speed = phydev->speed; |
| 71 |
val = phy_read(phydev, ET1011C_STATUS_REG); |
| 72 |
if ((val & ET1011C_SPEED_MASK) == |
| 73 |
ET1011C_GIGABIT_SPEED) { |
| 74 |
val = phy_read(phydev, ET1011C_CONFIG_REG); |
| 75 |
val &= ~ET1011C_TX_FIFO_MASK; |
| 76 |
phy_write(phydev, ET1011C_CONFIG_REG, val | |
| 77 |
ET1011C_GMII_INTERFACE | |
| 78 |
ET1011C_SYS_CLK_EN | |
| 79 |
ET1011C_TX_FIFO_DEPTH_16); |
| 80 |
|
| 81 |
} |
| 82 |
} |
| 83 |
return ret; |
| 84 |
} |
| 85 |
|
| 86 |
static struct phy_driver et1011c_driver[] = { { |
| 87 |
.phy_id = 0x0282f014, |
| 88 |
.name = "ET1011C", |
| 89 |
.phy_id_mask = 0xfffffff0, |
| 90 |
/* PHY_GBIT_FEATURES */ |
| 91 |
.config_aneg = et1011c_config_aneg, |
| 92 |
.read_status = et1011c_read_status, |
| 93 |
} }; |
| 94 |
|
| 95 |
module_phy_driver(et1011c_driver); |
| 96 |
|
| 97 |
static const struct mdio_device_id __maybe_unused et1011c_tbl[] = { |
| 98 |
{ 0x0282f014, 0xfffffff0 }, |
| 99 |
{ } |
| 100 |
}; |
| 101 |
|
| 102 |
MODULE_DEVICE_TABLE(mdio, et1011c_tbl); |