| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* phylink models the MAC to optional PHY connection, supporting |
| 4 |
* technologies such as SFP cages where the PHY is hot-pluggable. |
| 5 |
* |
| 6 |
* Copyright (C) 2015 Russell King |
| 7 |
*/ |
| 8 |
#include <linux/acpi.h> |
| 9 |
#include <linux/ethtool.h> |
| 10 |
#include <linux/export.h> |
| 11 |
#include <linux/gpio/consumer.h> |
| 12 |
#include <linux/netdevice.h> |
| 13 |
#include <linux/of.h> |
| 14 |
#include <linux/of_mdio.h> |
| 15 |
#include <linux/phy.h> |
| 16 |
#include <linux/phy_fixed.h> |
| 17 |
#include <linux/phylink.h> |
| 18 |
#include <linux/rtnetlink.h> |
| 19 |
#include <linux/spinlock.h> |
| 20 |
#include <linux/timer.h> |
| 21 |
#include <linux/workqueue.h> |
| 22 |
|
| 23 |
#include "phy-caps.h" |
| 24 |
#include "sfp.h" |
| 25 |
#include "swphy.h" |
| 26 |
|
| 27 |
enum { |
| 28 |
PHYLINK_DISABLE_STOPPED, |
| 29 |
PHYLINK_DISABLE_LINK, |
| 30 |
PHYLINK_DISABLE_MAC_WOL, |
| 31 |
PHYLINK_DISABLE_REPLAY, |
| 32 |
|
| 33 |
PCS_STATE_DOWN = 0, |
| 34 |
PCS_STATE_STARTING, |
| 35 |
PCS_STATE_STARTED, |
| 36 |
}; |
| 37 |
|
| 38 |
/** |
| 39 |
* struct phylink - internal data type for phylink |
| 40 |
*/ |
| 41 |
struct phylink { |
| 42 |
/* private: */ |
| 43 |
struct net_device *netdev; |
| 44 |
const struct phylink_mac_ops *mac_ops; |
| 45 |
struct phylink_config *config; |
| 46 |
struct phylink_pcs *pcs; |
| 47 |
struct device *dev; |
| 48 |
unsigned int old_link_state:1; |
| 49 |
|
| 50 |
unsigned long phylink_disable_state; /* bitmask of disables */ |
| 51 |
struct phy_device *phydev; |
| 52 |
phy_interface_t link_interface; /* PHY_INTERFACE_xxx */ |
| 53 |
u8 cfg_link_an_mode; /* MLO_AN_xxx */ |
| 54 |
u8 req_link_an_mode; /* Requested MLO_AN_xxx mode */ |
| 55 |
u8 act_link_an_mode; /* Active MLO_AN_xxx mode */ |
| 56 |
u8 link_port; /* The current non-phy ethtool port */ |
| 57 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported); |
| 58 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported_lpi); |
| 59 |
|
| 60 |
/* The link configuration settings */ |
| 61 |
struct phylink_link_state link_config; |
| 62 |
|
| 63 |
/* The current settings */ |
| 64 |
phy_interface_t cur_interface; |
| 65 |
|
| 66 |
struct gpio_desc *link_gpio; |
| 67 |
unsigned int link_irq; |
| 68 |
struct timer_list link_poll; |
| 69 |
|
| 70 |
struct mutex state_mutex; |
| 71 |
/* Serialize updates to pl->phydev with phylink_resolve() */ |
| 72 |
struct mutex phydev_mutex; |
| 73 |
struct phylink_link_state phy_state; |
| 74 |
unsigned int phy_ib_mode; |
| 75 |
struct work_struct resolve; |
| 76 |
unsigned int pcs_neg_mode; |
| 77 |
unsigned int pcs_state; |
| 78 |
|
| 79 |
bool link_failed; |
| 80 |
bool suspend_link_up; |
| 81 |
bool force_major_config; |
| 82 |
bool major_config_failed; |
| 83 |
bool mac_supports_eee_ops; |
| 84 |
bool mac_supports_eee; |
| 85 |
bool phy_enable_tx_lpi; |
| 86 |
bool mac_enable_tx_lpi; |
| 87 |
bool mac_tx_clk_stop; |
| 88 |
u32 mac_tx_lpi_timer; |
| 89 |
u8 mac_rx_clk_stop_blocked; |
| 90 |
|
| 91 |
struct sfp_bus *sfp_bus; |
| 92 |
bool sfp_may_have_phy; |
| 93 |
DECLARE_PHY_INTERFACE_MASK(sfp_interfaces); |
| 94 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); |
| 95 |
u8 sfp_port; |
| 96 |
|
| 97 |
struct eee_config eee_cfg; |
| 98 |
|
| 99 |
u32 wolopts_mac; |
| 100 |
u8 wol_sopass[SOPASS_MAX]; |
| 101 |
}; |
| 102 |
|
| 103 |
#define phylink_printk(level, pl, fmt, ...) \ |
| 104 |
do { \ |
| 105 |
if ((pl)->config->type == PHYLINK_NETDEV) \ |
| 106 |
netdev_printk(level, (pl)->netdev, fmt, ##__VA_ARGS__); \ |
| 107 |
else if ((pl)->config->type == PHYLINK_DEV) \ |
| 108 |
dev_printk(level, (pl)->dev, fmt, ##__VA_ARGS__); \ |
| 109 |
} while (0) |
| 110 |
|
| 111 |
#define phylink_err(pl, fmt, ...) \ |
| 112 |
phylink_printk(KERN_ERR, pl, fmt, ##__VA_ARGS__) |
| 113 |
#define phylink_warn(pl, fmt, ...) \ |
| 114 |
phylink_printk(KERN_WARNING, pl, fmt, ##__VA_ARGS__) |
| 115 |
#define phylink_info(pl, fmt, ...) \ |
| 116 |
phylink_printk(KERN_INFO, pl, fmt, ##__VA_ARGS__) |
| 117 |
#if defined(CONFIG_DYNAMIC_DEBUG) |
| 118 |
#define phylink_dbg(pl, fmt, ...) \ |
| 119 |
do { \ |
| 120 |
if ((pl)->config->type == PHYLINK_NETDEV) \ |
| 121 |
netdev_dbg((pl)->netdev, fmt, ##__VA_ARGS__); \ |
| 122 |
else if ((pl)->config->type == PHYLINK_DEV) \ |
| 123 |
dev_dbg((pl)->dev, fmt, ##__VA_ARGS__); \ |
| 124 |
} while (0) |
| 125 |
#elif defined(DEBUG) |
| 126 |
#define phylink_dbg(pl, fmt, ...) \ |
| 127 |
phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__) |
| 128 |
#else |
| 129 |
#define phylink_dbg(pl, fmt, ...) \ |
| 130 |
({ \ |
| 131 |
if (0) \ |
| 132 |
phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__); \ |
| 133 |
}) |
| 134 |
#endif |
| 135 |
|
| 136 |
static const phy_interface_t phylink_sfp_interface_preference[] = { |
| 137 |
PHY_INTERFACE_MODE_100GBASEP, |
| 138 |
PHY_INTERFACE_MODE_50GBASER, |
| 139 |
PHY_INTERFACE_MODE_LAUI, |
| 140 |
PHY_INTERFACE_MODE_25GBASER, |
| 141 |
PHY_INTERFACE_MODE_USXGMII, |
| 142 |
PHY_INTERFACE_MODE_10GBASER, |
| 143 |
PHY_INTERFACE_MODE_5GBASER, |
| 144 |
PHY_INTERFACE_MODE_2500BASEX, |
| 145 |
PHY_INTERFACE_MODE_SGMII, |
| 146 |
PHY_INTERFACE_MODE_1000BASEX, |
| 147 |
PHY_INTERFACE_MODE_100BASEX, |
| 148 |
}; |
| 149 |
|
| 150 |
static DECLARE_PHY_INTERFACE_MASK(phylink_sfp_interfaces); |
| 151 |
|
| 152 |
/** |
| 153 |
* phylink_set_port_modes() - set the port type modes in the ethtool mask |
| 154 |
* @mask: ethtool link mode mask |
| 155 |
* |
| 156 |
* Sets all the port type modes in the ethtool mask. MAC drivers should |
| 157 |
* use this in their 'validate' callback. |
| 158 |
*/ |
| 159 |
void phylink_set_port_modes(unsigned long *mask) |
| 160 |
{ |
| 161 |
phylink_set(mask, TP); |
| 162 |
phylink_set(mask, AUI); |
| 163 |
phylink_set(mask, MII); |
| 164 |
phylink_set(mask, FIBRE); |
| 165 |
phylink_set(mask, BNC); |
| 166 |
phylink_set(mask, Backplane); |
| 167 |
} |
| 168 |
EXPORT_SYMBOL_GPL(phylink_set_port_modes); |
| 169 |
|
| 170 |
static int phylink_is_empty_linkmode(const unsigned long *linkmode) |
| 171 |
{ |
| 172 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = { 0, }; |
| 173 |
|
| 174 |
phylink_set_port_modes(tmp); |
| 175 |
phylink_set(tmp, Autoneg); |
| 176 |
phylink_set(tmp, Pause); |
| 177 |
phylink_set(tmp, Asym_Pause); |
| 178 |
|
| 179 |
return linkmode_subset(linkmode, tmp); |
| 180 |
} |
| 181 |
|
| 182 |
static const char *phylink_an_mode_str(unsigned int mode) |
| 183 |
{ |
| 184 |
static const char *modestr[] = { |
| 185 |
[MLO_AN_PHY] = "phy", |
| 186 |
[MLO_AN_FIXED] = "fixed", |
| 187 |
[MLO_AN_INBAND] = "inband", |
| 188 |
}; |
| 189 |
|
| 190 |
return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown"; |
| 191 |
} |
| 192 |
|
| 193 |
static const char *phylink_pcs_mode_str(unsigned int mode) |
| 194 |
{ |
| 195 |
if (!mode) |
| 196 |
return "none"; |
| 197 |
|
| 198 |
if (mode & PHYLINK_PCS_NEG_OUTBAND) |
| 199 |
return "outband"; |
| 200 |
|
| 201 |
if (mode & PHYLINK_PCS_NEG_INBAND) { |
| 202 |
if (mode & PHYLINK_PCS_NEG_ENABLED) |
| 203 |
return "inband,an-enabled"; |
| 204 |
else |
| 205 |
return "inband,an-disabled"; |
| 206 |
} |
| 207 |
|
| 208 |
return "unknown"; |
| 209 |
} |
| 210 |
|
| 211 |
static unsigned int phylink_interface_signal_rate(phy_interface_t interface) |
| 212 |
{ |
| 213 |
switch (interface) { |
| 214 |
case PHY_INTERFACE_MODE_SGMII: |
| 215 |
case PHY_INTERFACE_MODE_1000BASEX: /* 1.25Mbd */ |
| 216 |
return 1250; |
| 217 |
case PHY_INTERFACE_MODE_2500BASEX: /* 3.125Mbd */ |
| 218 |
return 3125; |
| 219 |
case PHY_INTERFACE_MODE_5GBASER: /* 5.15625Mbd */ |
| 220 |
return 5156; |
| 221 |
case PHY_INTERFACE_MODE_10GBASER: /* 10.3125Mbd */ |
| 222 |
return 10313; |
| 223 |
default: |
| 224 |
return 0; |
| 225 |
} |
| 226 |
} |
| 227 |
|
| 228 |
/** |
| 229 |
* phylink_interface_max_speed() - get the maximum speed of a phy interface |
| 230 |
* @interface: phy interface mode defined by &typedef phy_interface_t |
| 231 |
* |
| 232 |
* Determine the maximum speed of a phy interface. This is intended to help |
| 233 |
* determine the correct speed to pass to the MAC when the phy is performing |
| 234 |
* rate matching. |
| 235 |
* |
| 236 |
* Return: The maximum speed of @interface |
| 237 |
*/ |
| 238 |
static int phylink_interface_max_speed(phy_interface_t interface) |
| 239 |
{ |
| 240 |
switch (interface) { |
| 241 |
case PHY_INTERFACE_MODE_100BASEX: |
| 242 |
case PHY_INTERFACE_MODE_REVRMII: |
| 243 |
case PHY_INTERFACE_MODE_RMII: |
| 244 |
case PHY_INTERFACE_MODE_SMII: |
| 245 |
case PHY_INTERFACE_MODE_REVMII: |
| 246 |
case PHY_INTERFACE_MODE_MII: |
| 247 |
case PHY_INTERFACE_MODE_MIILITE: |
| 248 |
return SPEED_100; |
| 249 |
|
| 250 |
case PHY_INTERFACE_MODE_TBI: |
| 251 |
case PHY_INTERFACE_MODE_MOCA: |
| 252 |
case PHY_INTERFACE_MODE_RTBI: |
| 253 |
case PHY_INTERFACE_MODE_1000BASEX: |
| 254 |
case PHY_INTERFACE_MODE_1000BASEKX: |
| 255 |
case PHY_INTERFACE_MODE_TRGMII: |
| 256 |
case PHY_INTERFACE_MODE_RGMII_TXID: |
| 257 |
case PHY_INTERFACE_MODE_RGMII_RXID: |
| 258 |
case PHY_INTERFACE_MODE_RGMII_ID: |
| 259 |
case PHY_INTERFACE_MODE_RGMII: |
| 260 |
case PHY_INTERFACE_MODE_PSGMII: |
| 261 |
case PHY_INTERFACE_MODE_QSGMII: |
| 262 |
case PHY_INTERFACE_MODE_QUSGMII: |
| 263 |
case PHY_INTERFACE_MODE_SGMII: |
| 264 |
case PHY_INTERFACE_MODE_GMII: |
| 265 |
return SPEED_1000; |
| 266 |
|
| 267 |
case PHY_INTERFACE_MODE_2500BASEX: |
| 268 |
case PHY_INTERFACE_MODE_10G_QXGMII: |
| 269 |
return SPEED_2500; |
| 270 |
|
| 271 |
case PHY_INTERFACE_MODE_5GBASER: |
| 272 |
return SPEED_5000; |
| 273 |
|
| 274 |
case PHY_INTERFACE_MODE_XGMII: |
| 275 |
case PHY_INTERFACE_MODE_RXAUI: |
| 276 |
case PHY_INTERFACE_MODE_XAUI: |
| 277 |
case PHY_INTERFACE_MODE_10GBASER: |
| 278 |
case PHY_INTERFACE_MODE_10GKR: |
| 279 |
case PHY_INTERFACE_MODE_USXGMII: |
| 280 |
return SPEED_10000; |
| 281 |
|
| 282 |
case PHY_INTERFACE_MODE_25GBASER: |
| 283 |
return SPEED_25000; |
| 284 |
|
| 285 |
case PHY_INTERFACE_MODE_XLGMII: |
| 286 |
return SPEED_40000; |
| 287 |
|
| 288 |
case PHY_INTERFACE_MODE_50GBASER: |
| 289 |
case PHY_INTERFACE_MODE_LAUI: |
| 290 |
return SPEED_50000; |
| 291 |
|
| 292 |
case PHY_INTERFACE_MODE_100GBASEP: |
| 293 |
return SPEED_100000; |
| 294 |
|
| 295 |
case PHY_INTERFACE_MODE_INTERNAL: |
| 296 |
case PHY_INTERFACE_MODE_NA: |
| 297 |
case PHY_INTERFACE_MODE_MAX: |
| 298 |
/* No idea! Garbage in, unknown out */ |
| 299 |
return SPEED_UNKNOWN; |
| 300 |
} |
| 301 |
|
| 302 |
/* If we get here, someone forgot to add an interface mode above */ |
| 303 |
WARN_ON_ONCE(1); |
| 304 |
return SPEED_UNKNOWN; |
| 305 |
} |
| 306 |
|
| 307 |
static struct { |
| 308 |
unsigned long mask; |
| 309 |
int speed; |
| 310 |
unsigned int duplex; |
| 311 |
unsigned int caps_bit; |
| 312 |
} phylink_caps_params[] = { |
| 313 |
{ MAC_400000FD, SPEED_400000, DUPLEX_FULL, BIT(LINK_CAPA_400000FD) }, |
| 314 |
{ MAC_200000FD, SPEED_200000, DUPLEX_FULL, BIT(LINK_CAPA_200000FD) }, |
| 315 |
{ MAC_100000FD, SPEED_100000, DUPLEX_FULL, BIT(LINK_CAPA_100000FD) }, |
| 316 |
{ MAC_80000FD, SPEED_80000, DUPLEX_FULL, BIT(LINK_CAPA_80000FD) }, |
| 317 |
{ MAC_56000FD, SPEED_56000, DUPLEX_FULL, BIT(LINK_CAPA_56000FD) }, |
| 318 |
{ MAC_50000FD, SPEED_50000, DUPLEX_FULL, BIT(LINK_CAPA_50000FD) }, |
| 319 |
{ MAC_40000FD, SPEED_40000, DUPLEX_FULL, BIT(LINK_CAPA_40000FD) }, |
| 320 |
{ MAC_25000FD, SPEED_25000, DUPLEX_FULL, BIT(LINK_CAPA_25000FD) }, |
| 321 |
{ MAC_20000FD, SPEED_20000, DUPLEX_FULL, BIT(LINK_CAPA_20000FD) }, |
| 322 |
{ MAC_10000FD, SPEED_10000, DUPLEX_FULL, BIT(LINK_CAPA_10000FD) }, |
| 323 |
{ MAC_5000FD, SPEED_5000, DUPLEX_FULL, BIT(LINK_CAPA_5000FD) }, |
| 324 |
{ MAC_2500FD, SPEED_2500, DUPLEX_FULL, BIT(LINK_CAPA_2500FD) }, |
| 325 |
{ MAC_1000FD, SPEED_1000, DUPLEX_FULL, BIT(LINK_CAPA_1000FD) }, |
| 326 |
{ MAC_1000HD, SPEED_1000, DUPLEX_HALF, BIT(LINK_CAPA_1000HD) }, |
| 327 |
{ MAC_100FD, SPEED_100, DUPLEX_FULL, BIT(LINK_CAPA_100FD) }, |
| 328 |
{ MAC_100HD, SPEED_100, DUPLEX_HALF, BIT(LINK_CAPA_100HD) }, |
| 329 |
{ MAC_10FD, SPEED_10, DUPLEX_FULL, BIT(LINK_CAPA_10FD) }, |
| 330 |
{ MAC_10HD, SPEED_10, DUPLEX_HALF, BIT(LINK_CAPA_10HD) }, |
| 331 |
}; |
| 332 |
|
| 333 |
/** |
| 334 |
* phylink_caps_to_link_caps() - Convert a set of MAC capabilities LINK caps |
| 335 |
* @caps: A set of MAC capabilities |
| 336 |
* |
| 337 |
* Returns: The corresponding set of LINK_CAPA as defined in phy-caps.h |
| 338 |
*/ |
| 339 |
static unsigned long phylink_caps_to_link_caps(unsigned long caps) |
| 340 |
{ |
| 341 |
unsigned long link_caps = 0; |
| 342 |
int i; |
| 343 |
|
| 344 |
for (i = 0; i < ARRAY_SIZE(phylink_caps_params); i++) |
| 345 |
if (caps & phylink_caps_params[i].mask) |
| 346 |
link_caps |= phylink_caps_params[i].caps_bit; |
| 347 |
|
| 348 |
return link_caps; |
| 349 |
} |
| 350 |
|
| 351 |
static unsigned long phylink_link_caps_to_mac_caps(unsigned long link_caps) |
| 352 |
{ |
| 353 |
unsigned long caps = 0; |
| 354 |
int i; |
| 355 |
|
| 356 |
for (i = 0; i < ARRAY_SIZE(phylink_caps_params); i++) |
| 357 |
if (link_caps & phylink_caps_params[i].caps_bit) |
| 358 |
caps |= phylink_caps_params[i].mask; |
| 359 |
|
| 360 |
return caps; |
| 361 |
} |
| 362 |
|
| 363 |
/** |
| 364 |
* phylink_caps_to_linkmodes() - Convert capabilities to ethtool link modes |
| 365 |
* @linkmodes: ethtool linkmode mask (must be already initialised) |
| 366 |
* @caps: bitmask of MAC capabilities |
| 367 |
* |
| 368 |
* Set all possible pause, speed and duplex linkmodes in @linkmodes that are |
| 369 |
* supported by the @caps. @linkmodes must have been initialised previously. |
| 370 |
*/ |
| 371 |
static void phylink_caps_to_linkmodes(unsigned long *linkmodes, |
| 372 |
unsigned long caps) |
| 373 |
{ |
| 374 |
unsigned long link_caps = phylink_caps_to_link_caps(caps); |
| 375 |
|
| 376 |
if (caps & MAC_SYM_PAUSE) |
| 377 |
__set_bit(ETHTOOL_LINK_MODE_Pause_BIT, linkmodes); |
| 378 |
|
| 379 |
if (caps & MAC_ASYM_PAUSE) |
| 380 |
__set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, linkmodes); |
| 381 |
|
| 382 |
phy_caps_linkmodes(link_caps, linkmodes); |
| 383 |
} |
| 384 |
|
| 385 |
/** |
| 386 |
* phylink_limit_mac_speed - limit the phylink_config to a maximum speed |
| 387 |
* @config: pointer to a &struct phylink_config |
| 388 |
* @max_speed: maximum speed |
| 389 |
* |
| 390 |
* Mask off MAC capabilities for speeds higher than the @max_speed parameter. |
| 391 |
* Any further motifications of config.mac_capabilities will override this. |
| 392 |
*/ |
| 393 |
void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed) |
| 394 |
{ |
| 395 |
int i; |
| 396 |
|
| 397 |
for (i = 0; i < ARRAY_SIZE(phylink_caps_params) && |
| 398 |
phylink_caps_params[i].speed > max_speed; i++) |
| 399 |
config->mac_capabilities &= ~phylink_caps_params[i].mask; |
| 400 |
} |
| 401 |
EXPORT_SYMBOL_GPL(phylink_limit_mac_speed); |
| 402 |
|
| 403 |
/** |
| 404 |
* phylink_cap_from_speed_duplex - Get mac capability from speed/duplex |
| 405 |
* @speed: the speed to search for |
| 406 |
* @duplex: the duplex to search for |
| 407 |
* |
| 408 |
* Find the mac capability for a given speed and duplex. |
| 409 |
* |
| 410 |
* Return: A mask with the mac capability patching @speed and @duplex, or 0 if |
| 411 |
* there were no matches. |
| 412 |
*/ |
| 413 |
static unsigned long phylink_cap_from_speed_duplex(int speed, |
| 414 |
unsigned int duplex) |
| 415 |
{ |
| 416 |
int i; |
| 417 |
|
| 418 |
for (i = 0; i < ARRAY_SIZE(phylink_caps_params); i++) { |
| 419 |
if (speed == phylink_caps_params[i].speed && |
| 420 |
duplex == phylink_caps_params[i].duplex) |
| 421 |
return phylink_caps_params[i].mask; |
| 422 |
} |
| 423 |
|
| 424 |
return 0; |
| 425 |
} |
| 426 |
|
| 427 |
/** |
| 428 |
* phylink_get_capabilities() - get capabilities for a given MAC |
| 429 |
* @interface: phy interface mode defined by &typedef phy_interface_t |
| 430 |
* @mac_capabilities: bitmask of MAC capabilities |
| 431 |
* @rate_matching: type of rate matching being performed |
| 432 |
* |
| 433 |
* Get the MAC capabilities that are supported by the @interface mode and |
| 434 |
* @mac_capabilities. |
| 435 |
*/ |
| 436 |
static unsigned long phylink_get_capabilities(phy_interface_t interface, |
| 437 |
unsigned long mac_capabilities, |
| 438 |
int rate_matching) |
| 439 |
{ |
| 440 |
unsigned long link_caps = phy_caps_from_interface(interface); |
| 441 |
int max_speed = phylink_interface_max_speed(interface); |
| 442 |
unsigned long caps = MAC_SYM_PAUSE | MAC_ASYM_PAUSE; |
| 443 |
unsigned long matched_caps = 0; |
| 444 |
|
| 445 |
caps |= phylink_link_caps_to_mac_caps(link_caps); |
| 446 |
|
| 447 |
switch (rate_matching) { |
| 448 |
case RATE_MATCH_OPEN_LOOP: |
| 449 |
/* TODO */ |
| 450 |
fallthrough; |
| 451 |
case RATE_MATCH_NONE: |
| 452 |
matched_caps = 0; |
| 453 |
break; |
| 454 |
case RATE_MATCH_PAUSE: { |
| 455 |
/* The MAC must support asymmetric pause towards the local |
| 456 |
* device for this. We could allow just symmetric pause, but |
| 457 |
* then we might have to renegotiate if the link partner |
| 458 |
* doesn't support pause. This is because there's no way to |
| 459 |
* accept pause frames without transmitting them if we only |
| 460 |
* support symmetric pause. |
| 461 |
*/ |
| 462 |
if (!(mac_capabilities & MAC_SYM_PAUSE) || |
| 463 |
!(mac_capabilities & MAC_ASYM_PAUSE)) |
| 464 |
break; |
| 465 |
|
| 466 |
/* We can't adapt if the MAC doesn't support the interface's |
| 467 |
* max speed at full duplex. |
| 468 |
*/ |
| 469 |
if (mac_capabilities & |
| 470 |
phylink_cap_from_speed_duplex(max_speed, DUPLEX_FULL)) |
| 471 |
matched_caps = GENMASK(__fls(caps), __fls(MAC_10HD)); |
| 472 |
break; |
| 473 |
} |
| 474 |
case RATE_MATCH_CRS: |
| 475 |
/* The MAC must support half duplex at the interface's max |
| 476 |
* speed. |
| 477 |
*/ |
| 478 |
if (mac_capabilities & |
| 479 |
phylink_cap_from_speed_duplex(max_speed, DUPLEX_HALF)) { |
| 480 |
matched_caps = GENMASK(__fls(caps), __fls(MAC_10HD)); |
| 481 |
matched_caps &= mac_capabilities; |
| 482 |
} |
| 483 |
break; |
| 484 |
} |
| 485 |
|
| 486 |
return (caps & mac_capabilities) | matched_caps; |
| 487 |
} |
| 488 |
|
| 489 |
/** |
| 490 |
* phylink_validate_mask_caps() - Restrict link modes based on caps |
| 491 |
* @supported: ethtool bitmask for supported link modes. |
| 492 |
* @state: pointer to a &struct phylink_link_state. |
| 493 |
* @mac_capabilities: bitmask of MAC capabilities |
| 494 |
* |
| 495 |
* Calculate the supported link modes based on @mac_capabilities, and restrict |
| 496 |
* @supported and @state based on that. Use this function if your capabiliies |
| 497 |
* aren't constant, such as if they vary depending on the interface. |
| 498 |
*/ |
| 499 |
static void phylink_validate_mask_caps(unsigned long *supported, |
| 500 |
struct phylink_link_state *state, |
| 501 |
unsigned long mac_capabilities) |
| 502 |
{ |
| 503 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; |
| 504 |
unsigned long caps; |
| 505 |
|
| 506 |
phylink_set_port_modes(mask); |
| 507 |
phylink_set(mask, Autoneg); |
| 508 |
caps = phylink_get_capabilities(state->interface, mac_capabilities, |
| 509 |
state->rate_matching); |
| 510 |
phylink_caps_to_linkmodes(mask, caps); |
| 511 |
|
| 512 |
linkmode_and(supported, supported, mask); |
| 513 |
linkmode_and(state->advertising, state->advertising, mask); |
| 514 |
} |
| 515 |
|
| 516 |
static int phylink_validate_mac_and_pcs(struct phylink *pl, |
| 517 |
unsigned long *supported, |
| 518 |
struct phylink_link_state *state) |
| 519 |
{ |
| 520 |
struct phylink_pcs *pcs = NULL; |
| 521 |
unsigned long capabilities; |
| 522 |
int ret; |
| 523 |
|
| 524 |
/* Get the PCS for this interface mode */ |
| 525 |
if (pl->mac_ops->mac_select_pcs) { |
| 526 |
pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface); |
| 527 |
if (IS_ERR(pcs)) |
| 528 |
return PTR_ERR(pcs); |
| 529 |
} |
| 530 |
|
| 531 |
if (pcs) { |
| 532 |
/* The PCS, if present, must be setup before phylink_create() |
| 533 |
* has been called. If the ops is not initialised, print an |
| 534 |
* error and backtrace rather than oopsing the kernel. |
| 535 |
*/ |
| 536 |
if (!pcs->ops) { |
| 537 |
phylink_err(pl, "interface %s: uninitialised PCS\n", |
| 538 |
phy_modes(state->interface)); |
| 539 |
dump_stack(); |
| 540 |
return -EINVAL; |
| 541 |
} |
| 542 |
|
| 543 |
/* Ensure that this PCS supports the interface which the MAC |
| 544 |
* returned it for. It is an error for the MAC to return a PCS |
| 545 |
* that does not support the interface mode. |
| 546 |
*/ |
| 547 |
if (!phy_interface_empty(pcs->supported_interfaces) && |
| 548 |
!test_bit(state->interface, pcs->supported_interfaces)) { |
| 549 |
phylink_err(pl, "MAC returned PCS which does not support %s\n", |
| 550 |
phy_modes(state->interface)); |
| 551 |
return -EINVAL; |
| 552 |
} |
| 553 |
|
| 554 |
/* Validate the link parameters with the PCS */ |
| 555 |
if (pcs->ops->pcs_validate) { |
| 556 |
ret = pcs->ops->pcs_validate(pcs, supported, state); |
| 557 |
if (ret < 0 || phylink_is_empty_linkmode(supported)) |
| 558 |
return -EINVAL; |
| 559 |
|
| 560 |
/* Ensure the advertising mask is a subset of the |
| 561 |
* supported mask. |
| 562 |
*/ |
| 563 |
linkmode_and(state->advertising, state->advertising, |
| 564 |
supported); |
| 565 |
} |
| 566 |
} |
| 567 |
|
| 568 |
/* Then validate the link parameters with the MAC */ |
| 569 |
if (pl->mac_ops->mac_get_caps) |
| 570 |
capabilities = pl->mac_ops->mac_get_caps(pl->config, |
| 571 |
state->interface); |
| 572 |
else |
| 573 |
capabilities = pl->config->mac_capabilities; |
| 574 |
|
| 575 |
phylink_validate_mask_caps(supported, state, capabilities); |
| 576 |
|
| 577 |
return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; |
| 578 |
} |
| 579 |
|
| 580 |
static void phylink_validate_one(struct phylink *pl, struct phy_device *phy, |
| 581 |
const unsigned long *supported, |
| 582 |
const struct phylink_link_state *state, |
| 583 |
phy_interface_t interface, |
| 584 |
unsigned long *accum_supported, |
| 585 |
unsigned long *accum_advertising) |
| 586 |
{ |
| 587 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_supported); |
| 588 |
struct phylink_link_state tmp_state; |
| 589 |
|
| 590 |
linkmode_copy(tmp_supported, supported); |
| 591 |
|
| 592 |
tmp_state = *state; |
| 593 |
tmp_state.interface = interface; |
| 594 |
|
| 595 |
if (phy) |
| 596 |
tmp_state.rate_matching = phy_get_rate_matching(phy, interface); |
| 597 |
|
| 598 |
if (!phylink_validate_mac_and_pcs(pl, tmp_supported, &tmp_state)) { |
| 599 |
phylink_dbg(pl, " interface %u (%s) rate match %s supports %*pbl\n", |
| 600 |
interface, phy_modes(interface), |
| 601 |
phy_rate_matching_to_str(tmp_state.rate_matching), |
| 602 |
__ETHTOOL_LINK_MODE_MASK_NBITS, tmp_supported); |
| 603 |
|
| 604 |
linkmode_or(accum_supported, accum_supported, tmp_supported); |
| 605 |
linkmode_or(accum_advertising, accum_advertising, |
| 606 |
tmp_state.advertising); |
| 607 |
} |
| 608 |
} |
| 609 |
|
| 610 |
static int phylink_validate_mask(struct phylink *pl, struct phy_device *phy, |
| 611 |
unsigned long *supported, |
| 612 |
struct phylink_link_state *state, |
| 613 |
const unsigned long *interfaces) |
| 614 |
{ |
| 615 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(all_adv) = { 0, }; |
| 616 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(all_s) = { 0, }; |
| 617 |
int interface; |
| 618 |
|
| 619 |
for_each_set_bit(interface, interfaces, PHY_INTERFACE_MODE_MAX) |
| 620 |
phylink_validate_one(pl, phy, supported, state, interface, |
| 621 |
all_s, all_adv); |
| 622 |
|
| 623 |
linkmode_copy(supported, all_s); |
| 624 |
linkmode_copy(state->advertising, all_adv); |
| 625 |
|
| 626 |
return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; |
| 627 |
} |
| 628 |
|
| 629 |
static int phylink_validate(struct phylink *pl, unsigned long *supported, |
| 630 |
struct phylink_link_state *state) |
| 631 |
{ |
| 632 |
const unsigned long *interfaces = pl->config->supported_interfaces; |
| 633 |
|
| 634 |
if (state->interface == PHY_INTERFACE_MODE_NA) |
| 635 |
return phylink_validate_mask(pl, NULL, supported, state, |
| 636 |
interfaces); |
| 637 |
|
| 638 |
if (!test_bit(state->interface, interfaces)) |
| 639 |
return -EINVAL; |
| 640 |
|
| 641 |
return phylink_validate_mac_and_pcs(pl, supported, state); |
| 642 |
} |
| 643 |
|
| 644 |
static void phylink_fill_fixedlink_supported(unsigned long *supported) |
| 645 |
{ |
| 646 |
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported); |
| 647 |
linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported); |
| 648 |
linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported); |
| 649 |
linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, supported); |
| 650 |
linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, supported); |
| 651 |
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, supported); |
| 652 |
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, supported); |
| 653 |
linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, supported); |
| 654 |
linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, supported); |
| 655 |
linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, supported); |
| 656 |
linkmode_set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, supported); |
| 657 |
linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, supported); |
| 658 |
} |
| 659 |
|
| 660 |
static int phylink_parse_fixedlink(struct phylink *pl, |
| 661 |
const struct fwnode_handle *fwnode) |
| 662 |
{ |
| 663 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(match) = { 0, }; |
| 664 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; |
| 665 |
const struct link_capabilities *c; |
| 666 |
struct fwnode_handle *fixed_node; |
| 667 |
struct gpio_desc *desc; |
| 668 |
u32 speed; |
| 669 |
int ret; |
| 670 |
|
| 671 |
fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link"); |
| 672 |
if (fixed_node) { |
| 673 |
ret = fwnode_property_read_u32(fixed_node, "speed", &speed); |
| 674 |
|
| 675 |
pl->link_config.speed = speed; |
| 676 |
pl->link_config.duplex = DUPLEX_HALF; |
| 677 |
|
| 678 |
if (fwnode_property_read_bool(fixed_node, "full-duplex")) |
| 679 |
pl->link_config.duplex = DUPLEX_FULL; |
| 680 |
|
| 681 |
/* We treat the "pause" and "asym-pause" terminology as |
| 682 |
* defining the link partner's ability. |
| 683 |
*/ |
| 684 |
if (fwnode_property_read_bool(fixed_node, "pause")) |
| 685 |
__set_bit(ETHTOOL_LINK_MODE_Pause_BIT, |
| 686 |
pl->link_config.lp_advertising); |
| 687 |
if (fwnode_property_read_bool(fixed_node, "asym-pause")) |
| 688 |
__set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| 689 |
pl->link_config.lp_advertising); |
| 690 |
|
| 691 |
if (ret == 0) { |
| 692 |
desc = fwnode_gpiod_get_index(fixed_node, "link", 0, |
| 693 |
GPIOD_IN, "?"); |
| 694 |
|
| 695 |
if (!IS_ERR(desc)) |
| 696 |
pl->link_gpio = desc; |
| 697 |
else if (desc == ERR_PTR(-EPROBE_DEFER)) |
| 698 |
ret = -EPROBE_DEFER; |
| 699 |
} |
| 700 |
fwnode_handle_put(fixed_node); |
| 701 |
|
| 702 |
if (ret) |
| 703 |
return ret; |
| 704 |
} else { |
| 705 |
u32 prop[5]; |
| 706 |
|
| 707 |
ret = fwnode_property_read_u32_array(fwnode, "fixed-link", |
| 708 |
NULL, 0); |
| 709 |
if (ret != ARRAY_SIZE(prop)) { |
| 710 |
phylink_err(pl, "broken fixed-link?\n"); |
| 711 |
return -EINVAL; |
| 712 |
} |
| 713 |
|
| 714 |
phylink_warn(pl, "%pfw uses deprecated array-style fixed-link binding!\n", |
| 715 |
fwnode); |
| 716 |
|
| 717 |
ret = fwnode_property_read_u32_array(fwnode, "fixed-link", |
| 718 |
prop, ARRAY_SIZE(prop)); |
| 719 |
if (!ret) { |
| 720 |
pl->link_config.duplex = prop[1] ? |
| 721 |
DUPLEX_FULL : DUPLEX_HALF; |
| 722 |
pl->link_config.speed = prop[2]; |
| 723 |
if (prop[3]) |
| 724 |
__set_bit(ETHTOOL_LINK_MODE_Pause_BIT, |
| 725 |
pl->link_config.lp_advertising); |
| 726 |
if (prop[4]) |
| 727 |
__set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| 728 |
pl->link_config.lp_advertising); |
| 729 |
} |
| 730 |
} |
| 731 |
|
| 732 |
if (pl->link_config.speed > SPEED_1000 && |
| 733 |
pl->link_config.duplex != DUPLEX_FULL) |
| 734 |
phylink_warn(pl, "fixed link specifies half duplex for %dMbps link?\n", |
| 735 |
pl->link_config.speed); |
| 736 |
|
| 737 |
linkmode_zero(pl->supported); |
| 738 |
phylink_fill_fixedlink_supported(pl->supported); |
| 739 |
|
| 740 |
linkmode_copy(pl->link_config.advertising, pl->supported); |
| 741 |
phylink_validate(pl, pl->supported, &pl->link_config); |
| 742 |
|
| 743 |
c = phy_caps_lookup(pl->link_config.speed, pl->link_config.duplex, |
| 744 |
pl->supported, true); |
| 745 |
if (c) |
| 746 |
linkmode_and(match, pl->supported, c->linkmodes); |
| 747 |
|
| 748 |
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, mask); |
| 749 |
linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, mask); |
| 750 |
linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, mask); |
| 751 |
linkmode_and(pl->supported, pl->supported, mask); |
| 752 |
|
| 753 |
phylink_set(pl->supported, MII); |
| 754 |
|
| 755 |
if (c) { |
| 756 |
linkmode_or(pl->supported, pl->supported, match); |
| 757 |
linkmode_or(pl->link_config.lp_advertising, |
| 758 |
pl->link_config.lp_advertising, match); |
| 759 |
} else { |
| 760 |
phylink_warn(pl, "fixed link %s duplex %dMbps not recognised\n", |
| 761 |
pl->link_config.duplex == DUPLEX_FULL ? "full" : "half", |
| 762 |
pl->link_config.speed); |
| 763 |
} |
| 764 |
|
| 765 |
linkmode_and(pl->link_config.advertising, pl->link_config.advertising, |
| 766 |
pl->supported); |
| 767 |
|
| 768 |
pl->link_config.link = 1; |
| 769 |
pl->link_config.an_complete = 1; |
| 770 |
|
| 771 |
return 0; |
| 772 |
} |
| 773 |
|
| 774 |
static int phylink_parse_mode(struct phylink *pl, |
| 775 |
const struct fwnode_handle *fwnode) |
| 776 |
{ |
| 777 |
struct fwnode_handle *dn; |
| 778 |
const char *managed; |
| 779 |
unsigned long caps; |
| 780 |
|
| 781 |
if (pl->config->default_an_inband) |
| 782 |
pl->cfg_link_an_mode = MLO_AN_INBAND; |
| 783 |
|
| 784 |
dn = fwnode_get_named_child_node(fwnode, "fixed-link"); |
| 785 |
if (dn || fwnode_property_present(fwnode, "fixed-link")) |
| 786 |
pl->cfg_link_an_mode = MLO_AN_FIXED; |
| 787 |
fwnode_handle_put(dn); |
| 788 |
|
| 789 |
if ((fwnode_property_read_string(fwnode, "managed", &managed) == 0 && |
| 790 |
strcmp(managed, "in-band-status") == 0)) { |
| 791 |
if (pl->cfg_link_an_mode == MLO_AN_FIXED) { |
| 792 |
phylink_err(pl, |
| 793 |
"can't use both fixed-link and in-band-status\n"); |
| 794 |
return -EINVAL; |
| 795 |
} |
| 796 |
|
| 797 |
pl->cfg_link_an_mode = MLO_AN_INBAND; |
| 798 |
} |
| 799 |
|
| 800 |
if (pl->cfg_link_an_mode == MLO_AN_INBAND) { |
| 801 |
linkmode_zero(pl->supported); |
| 802 |
phylink_set(pl->supported, MII); |
| 803 |
phylink_set(pl->supported, Autoneg); |
| 804 |
phylink_set(pl->supported, Asym_Pause); |
| 805 |
phylink_set(pl->supported, Pause); |
| 806 |
|
| 807 |
switch (pl->link_config.interface) { |
| 808 |
case PHY_INTERFACE_MODE_SGMII: |
| 809 |
case PHY_INTERFACE_MODE_PSGMII: |
| 810 |
case PHY_INTERFACE_MODE_QSGMII: |
| 811 |
case PHY_INTERFACE_MODE_QUSGMII: |
| 812 |
case PHY_INTERFACE_MODE_RGMII: |
| 813 |
case PHY_INTERFACE_MODE_RGMII_ID: |
| 814 |
case PHY_INTERFACE_MODE_RGMII_RXID: |
| 815 |
case PHY_INTERFACE_MODE_RGMII_TXID: |
| 816 |
case PHY_INTERFACE_MODE_RTBI: |
| 817 |
case PHY_INTERFACE_MODE_1000BASEX: |
| 818 |
case PHY_INTERFACE_MODE_2500BASEX: |
| 819 |
case PHY_INTERFACE_MODE_5GBASER: |
| 820 |
case PHY_INTERFACE_MODE_25GBASER: |
| 821 |
case PHY_INTERFACE_MODE_USXGMII: |
| 822 |
case PHY_INTERFACE_MODE_10G_QXGMII: |
| 823 |
case PHY_INTERFACE_MODE_10GKR: |
| 824 |
case PHY_INTERFACE_MODE_10GBASER: |
| 825 |
case PHY_INTERFACE_MODE_XLGMII: |
| 826 |
case PHY_INTERFACE_MODE_50GBASER: |
| 827 |
case PHY_INTERFACE_MODE_LAUI: |
| 828 |
case PHY_INTERFACE_MODE_100GBASEP: |
| 829 |
caps = ~(MAC_SYM_PAUSE | MAC_ASYM_PAUSE); |
| 830 |
caps = phylink_get_capabilities(pl->link_config.interface, caps, |
| 831 |
RATE_MATCH_NONE); |
| 832 |
phylink_caps_to_linkmodes(pl->supported, caps); |
| 833 |
break; |
| 834 |
|
| 835 |
default: |
| 836 |
phylink_err(pl, |
| 837 |
"incorrect link mode %s for in-band status\n", |
| 838 |
phy_modes(pl->link_config.interface)); |
| 839 |
return -EINVAL; |
| 840 |
} |
| 841 |
|
| 842 |
linkmode_copy(pl->link_config.advertising, pl->supported); |
| 843 |
|
| 844 |
if (phylink_validate(pl, pl->supported, &pl->link_config)) { |
| 845 |
phylink_err(pl, |
| 846 |
"failed to validate link configuration for in-band status\n"); |
| 847 |
return -EINVAL; |
| 848 |
} |
| 849 |
} |
| 850 |
|
| 851 |
return 0; |
| 852 |
} |
| 853 |
|
| 854 |
static void phylink_apply_manual_flow(struct phylink *pl, |
| 855 |
struct phylink_link_state *state) |
| 856 |
{ |
| 857 |
/* If autoneg is disabled, pause AN is also disabled */ |
| 858 |
if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 859 |
state->advertising)) |
| 860 |
state->pause &= ~MLO_PAUSE_AN; |
| 861 |
|
| 862 |
/* Manual configuration of pause modes */ |
| 863 |
if (!(pl->link_config.pause & MLO_PAUSE_AN)) |
| 864 |
state->pause = pl->link_config.pause; |
| 865 |
} |
| 866 |
|
| 867 |
static void phylink_resolve_an_pause(struct phylink_link_state *state) |
| 868 |
{ |
| 869 |
bool tx_pause, rx_pause; |
| 870 |
|
| 871 |
if (state->duplex == DUPLEX_FULL) { |
| 872 |
linkmode_resolve_pause(state->advertising, |
| 873 |
state->lp_advertising, |
| 874 |
&tx_pause, &rx_pause); |
| 875 |
if (tx_pause) |
| 876 |
state->pause |= MLO_PAUSE_TX; |
| 877 |
if (rx_pause) |
| 878 |
state->pause |= MLO_PAUSE_RX; |
| 879 |
} |
| 880 |
} |
| 881 |
|
| 882 |
static unsigned int phylink_pcs_inband_caps(struct phylink_pcs *pcs, |
| 883 |
phy_interface_t interface) |
| 884 |
{ |
| 885 |
if (pcs && pcs->ops->pcs_inband_caps) |
| 886 |
return pcs->ops->pcs_inband_caps(pcs, interface); |
| 887 |
|
| 888 |
return 0; |
| 889 |
} |
| 890 |
|
| 891 |
static void phylink_pcs_pre_config(struct phylink_pcs *pcs, |
| 892 |
phy_interface_t interface) |
| 893 |
{ |
| 894 |
if (pcs && pcs->ops->pcs_pre_config) |
| 895 |
pcs->ops->pcs_pre_config(pcs, interface); |
| 896 |
} |
| 897 |
|
| 898 |
static int phylink_pcs_post_config(struct phylink_pcs *pcs, |
| 899 |
phy_interface_t interface) |
| 900 |
{ |
| 901 |
int err = 0; |
| 902 |
|
| 903 |
if (pcs && pcs->ops->pcs_post_config) |
| 904 |
err = pcs->ops->pcs_post_config(pcs, interface); |
| 905 |
|
| 906 |
return err; |
| 907 |
} |
| 908 |
|
| 909 |
static void phylink_pcs_disable(struct phylink_pcs *pcs) |
| 910 |
{ |
| 911 |
if (pcs && pcs->ops->pcs_disable) |
| 912 |
pcs->ops->pcs_disable(pcs); |
| 913 |
} |
| 914 |
|
| 915 |
static int phylink_pcs_enable(struct phylink_pcs *pcs) |
| 916 |
{ |
| 917 |
int err = 0; |
| 918 |
|
| 919 |
if (pcs && pcs->ops->pcs_enable) |
| 920 |
err = pcs->ops->pcs_enable(pcs); |
| 921 |
|
| 922 |
return err; |
| 923 |
} |
| 924 |
|
| 925 |
static int phylink_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode, |
| 926 |
const struct phylink_link_state *state, |
| 927 |
bool permit_pause_to_mac) |
| 928 |
{ |
| 929 |
if (!pcs) |
| 930 |
return 0; |
| 931 |
|
| 932 |
return pcs->ops->pcs_config(pcs, neg_mode, state->interface, |
| 933 |
state->advertising, permit_pause_to_mac); |
| 934 |
} |
| 935 |
|
| 936 |
static void phylink_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode, |
| 937 |
phy_interface_t interface, int speed, |
| 938 |
int duplex) |
| 939 |
{ |
| 940 |
if (pcs && pcs->ops->pcs_link_up) |
| 941 |
pcs->ops->pcs_link_up(pcs, neg_mode, interface, speed, duplex); |
| 942 |
} |
| 943 |
|
| 944 |
static void phylink_pcs_disable_eee(struct phylink_pcs *pcs) |
| 945 |
{ |
| 946 |
if (pcs && pcs->ops->pcs_disable_eee) |
| 947 |
pcs->ops->pcs_disable_eee(pcs); |
| 948 |
} |
| 949 |
|
| 950 |
static void phylink_pcs_enable_eee(struct phylink_pcs *pcs) |
| 951 |
{ |
| 952 |
if (pcs && pcs->ops->pcs_enable_eee) |
| 953 |
pcs->ops->pcs_enable_eee(pcs); |
| 954 |
} |
| 955 |
|
| 956 |
/* Query inband for a specific interface mode, asking the MAC for the |
| 957 |
* PCS which will be used to handle the interface mode. |
| 958 |
*/ |
| 959 |
static unsigned int phylink_inband_caps(struct phylink *pl, |
| 960 |
phy_interface_t interface) |
| 961 |
{ |
| 962 |
struct phylink_pcs *pcs; |
| 963 |
|
| 964 |
if (!pl->mac_ops->mac_select_pcs) |
| 965 |
return 0; |
| 966 |
|
| 967 |
pcs = pl->mac_ops->mac_select_pcs(pl->config, interface); |
| 968 |
if (!pcs) |
| 969 |
return 0; |
| 970 |
|
| 971 |
return phylink_pcs_inband_caps(pcs, interface); |
| 972 |
} |
| 973 |
|
| 974 |
static void phylink_pcs_poll_stop(struct phylink *pl) |
| 975 |
{ |
| 976 |
if (pl->cfg_link_an_mode == MLO_AN_INBAND) |
| 977 |
timer_delete(&pl->link_poll); |
| 978 |
} |
| 979 |
|
| 980 |
static void phylink_pcs_poll_start(struct phylink *pl) |
| 981 |
{ |
| 982 |
if (pl->pcs && pl->pcs->poll && pl->cfg_link_an_mode == MLO_AN_INBAND) |
| 983 |
mod_timer(&pl->link_poll, jiffies + HZ); |
| 984 |
} |
| 985 |
|
| 986 |
int phylink_pcs_pre_init(struct phylink *pl, struct phylink_pcs *pcs) |
| 987 |
{ |
| 988 |
int ret = 0; |
| 989 |
|
| 990 |
/* Signal to PCS driver that MAC requires RX clock for init */ |
| 991 |
if (pl->config->mac_requires_rxc) |
| 992 |
pcs->rxc_always_on = true; |
| 993 |
|
| 994 |
if (pcs->ops->pcs_pre_init) |
| 995 |
ret = pcs->ops->pcs_pre_init(pcs); |
| 996 |
|
| 997 |
return ret; |
| 998 |
} |
| 999 |
EXPORT_SYMBOL_GPL(phylink_pcs_pre_init); |
| 1000 |
|
| 1001 |
static void phylink_mac_config(struct phylink *pl, |
| 1002 |
const struct phylink_link_state *state) |
| 1003 |
{ |
| 1004 |
struct phylink_link_state st = *state; |
| 1005 |
|
| 1006 |
/* Stop drivers incorrectly using these */ |
| 1007 |
linkmode_zero(st.lp_advertising); |
| 1008 |
st.speed = SPEED_UNKNOWN; |
| 1009 |
st.duplex = DUPLEX_UNKNOWN; |
| 1010 |
st.an_complete = false; |
| 1011 |
st.link = false; |
| 1012 |
|
| 1013 |
phylink_dbg(pl, |
| 1014 |
"%s: mode=%s/%s/%s adv=%*pb pause=%02x\n", |
| 1015 |
__func__, phylink_an_mode_str(pl->act_link_an_mode), |
| 1016 |
phy_modes(st.interface), |
| 1017 |
phy_rate_matching_to_str(st.rate_matching), |
| 1018 |
__ETHTOOL_LINK_MODE_MASK_NBITS, st.advertising, |
| 1019 |
st.pause); |
| 1020 |
|
| 1021 |
pl->mac_ops->mac_config(pl->config, pl->act_link_an_mode, &st); |
| 1022 |
} |
| 1023 |
|
| 1024 |
static void phylink_pcs_an_restart(struct phylink *pl) |
| 1025 |
{ |
| 1026 |
if (pl->pcs && linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 1027 |
pl->link_config.advertising) && |
| 1028 |
phy_interface_mode_is_8023z(pl->link_config.interface) && |
| 1029 |
phylink_autoneg_inband(pl->act_link_an_mode)) |
| 1030 |
pl->pcs->ops->pcs_an_restart(pl->pcs); |
| 1031 |
} |
| 1032 |
|
| 1033 |
enum inband_type { |
| 1034 |
INBAND_NONE, |
| 1035 |
INBAND_CISCO_SGMII, |
| 1036 |
INBAND_BASEX, |
| 1037 |
}; |
| 1038 |
|
| 1039 |
static enum inband_type phylink_get_inband_type(phy_interface_t interface) |
| 1040 |
{ |
| 1041 |
switch (interface) { |
| 1042 |
case PHY_INTERFACE_MODE_SGMII: |
| 1043 |
case PHY_INTERFACE_MODE_QSGMII: |
| 1044 |
case PHY_INTERFACE_MODE_QUSGMII: |
| 1045 |
case PHY_INTERFACE_MODE_USXGMII: |
| 1046 |
case PHY_INTERFACE_MODE_10G_QXGMII: |
| 1047 |
/* These protocols are designed for use with a PHY which |
| 1048 |
* communicates its negotiation result back to the MAC via |
| 1049 |
* inband communication. Note: there exist PHYs that run |
| 1050 |
* with SGMII but do not send the inband data. |
| 1051 |
*/ |
| 1052 |
return INBAND_CISCO_SGMII; |
| 1053 |
|
| 1054 |
case PHY_INTERFACE_MODE_1000BASEX: |
| 1055 |
case PHY_INTERFACE_MODE_2500BASEX: |
| 1056 |
/* 1000base-X is designed for use media-side for Fibre |
| 1057 |
* connections, and thus the Autoneg bit needs to be |
| 1058 |
* taken into account. We also do this for 2500base-X |
| 1059 |
* as well, but drivers may not support this, so may |
| 1060 |
* need to override this. |
| 1061 |
*/ |
| 1062 |
return INBAND_BASEX; |
| 1063 |
|
| 1064 |
default: |
| 1065 |
return INBAND_NONE; |
| 1066 |
} |
| 1067 |
} |
| 1068 |
|
| 1069 |
/** |
| 1070 |
* phylink_pcs_neg_mode() - helper to determine PCS inband mode |
| 1071 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 1072 |
* @pcs: a pointer to &struct phylink_pcs |
| 1073 |
* @interface: interface mode to be used |
| 1074 |
* @advertising: adertisement ethtool link mode mask |
| 1075 |
* |
| 1076 |
* Determines the negotiation mode to be used by the PCS, and returns |
| 1077 |
* one of: |
| 1078 |
* |
| 1079 |
* - %PHYLINK_PCS_NEG_NONE: interface mode does not support inband |
| 1080 |
* - %PHYLINK_PCS_NEG_OUTBAND: an out of band mode (e.g. reading the PHY) |
| 1081 |
* will be used. |
| 1082 |
* - %PHYLINK_PCS_NEG_INBAND_DISABLED: inband mode selected but autoneg |
| 1083 |
* disabled |
| 1084 |
* - %PHYLINK_PCS_NEG_INBAND_ENABLED: inband mode selected and autoneg enabled |
| 1085 |
* |
| 1086 |
* Note: this is for cases where the PCS itself is involved in negotiation |
| 1087 |
* (e.g. Clause 37, SGMII and similar) not Clause 73. |
| 1088 |
*/ |
| 1089 |
static void phylink_pcs_neg_mode(struct phylink *pl, struct phylink_pcs *pcs, |
| 1090 |
phy_interface_t interface, |
| 1091 |
const unsigned long *advertising) |
| 1092 |
{ |
| 1093 |
unsigned int pcs_ib_caps = 0; |
| 1094 |
unsigned int phy_ib_caps = 0; |
| 1095 |
unsigned int neg_mode, mode; |
| 1096 |
enum inband_type type; |
| 1097 |
|
| 1098 |
type = phylink_get_inband_type(interface); |
| 1099 |
if (type == INBAND_NONE) { |
| 1100 |
pl->pcs_neg_mode = PHYLINK_PCS_NEG_NONE; |
| 1101 |
pl->act_link_an_mode = pl->req_link_an_mode; |
| 1102 |
return; |
| 1103 |
} |
| 1104 |
|
| 1105 |
mode = pl->req_link_an_mode; |
| 1106 |
|
| 1107 |
pl->phy_ib_mode = 0; |
| 1108 |
|
| 1109 |
if (pcs) |
| 1110 |
pcs_ib_caps = phylink_pcs_inband_caps(pcs, interface); |
| 1111 |
|
| 1112 |
if (pl->phydev) |
| 1113 |
phy_ib_caps = phy_inband_caps(pl->phydev, interface); |
| 1114 |
|
| 1115 |
phylink_dbg(pl, "interface %s inband modes: pcs=%02x phy=%02x\n", |
| 1116 |
phy_modes(interface), pcs_ib_caps, phy_ib_caps); |
| 1117 |
|
| 1118 |
if (!phylink_autoneg_inband(mode)) { |
| 1119 |
bool pcs_ib_only = false; |
| 1120 |
bool phy_ib_only = false; |
| 1121 |
|
| 1122 |
if (pcs_ib_caps && pcs_ib_caps != LINK_INBAND_DISABLE) { |
| 1123 |
/* PCS supports reporting in-band capabilities, and |
| 1124 |
* supports more than disable mode. |
| 1125 |
*/ |
| 1126 |
if (pcs_ib_caps & LINK_INBAND_DISABLE) |
| 1127 |
neg_mode = PHYLINK_PCS_NEG_OUTBAND; |
| 1128 |
else if (pcs_ib_caps & LINK_INBAND_ENABLE) |
| 1129 |
pcs_ib_only = true; |
| 1130 |
} |
| 1131 |
|
| 1132 |
if (phy_ib_caps && phy_ib_caps != LINK_INBAND_DISABLE) { |
| 1133 |
/* PHY supports in-band capabilities, and supports |
| 1134 |
* more than disable mode. |
| 1135 |
*/ |
| 1136 |
if (phy_ib_caps & LINK_INBAND_DISABLE) |
| 1137 |
pl->phy_ib_mode = LINK_INBAND_DISABLE; |
| 1138 |
else if (phy_ib_caps & LINK_INBAND_BYPASS) |
| 1139 |
pl->phy_ib_mode = LINK_INBAND_BYPASS; |
| 1140 |
else if (phy_ib_caps & LINK_INBAND_ENABLE) |
| 1141 |
phy_ib_only = true; |
| 1142 |
} |
| 1143 |
|
| 1144 |
/* If either the PCS or PHY requires inband to be enabled, |
| 1145 |
* this is an invalid configuration. Provide a diagnostic |
| 1146 |
* message for this case, but don't try to force the issue. |
| 1147 |
*/ |
| 1148 |
if (pcs_ib_only || phy_ib_only) |
| 1149 |
phylink_warn(pl, |
| 1150 |
"firmware wants %s mode, but %s%s%s requires inband\n", |
| 1151 |
phylink_an_mode_str(mode), |
| 1152 |
pcs_ib_only ? "PCS" : "", |
| 1153 |
pcs_ib_only && phy_ib_only ? " and " : "", |
| 1154 |
phy_ib_only ? "PHY" : ""); |
| 1155 |
|
| 1156 |
neg_mode = PHYLINK_PCS_NEG_OUTBAND; |
| 1157 |
} else if (type == INBAND_CISCO_SGMII || pl->phydev) { |
| 1158 |
/* For SGMII modes which are designed to be used with PHYs, or |
| 1159 |
* Base-X with a PHY, we try to use in-band mode where-ever |
| 1160 |
* possible. However, there are some PHYs e.g. BCM84881 which |
| 1161 |
* do not support in-band. |
| 1162 |
*/ |
| 1163 |
const unsigned int inband_ok = LINK_INBAND_ENABLE | |
| 1164 |
LINK_INBAND_BYPASS; |
| 1165 |
const unsigned int outband_ok = LINK_INBAND_DISABLE | |
| 1166 |
LINK_INBAND_BYPASS; |
| 1167 |
/* PCS PHY |
| 1168 |
* D E D E |
| 1169 |
* 0 0 0 0 no information inband enabled |
| 1170 |
* 1 0 0 0 pcs doesn't support outband |
| 1171 |
* 0 1 0 0 pcs required inband enabled |
| 1172 |
* 1 1 0 0 pcs optional inband enabled |
| 1173 |
* 0 0 1 0 phy doesn't support outband |
| 1174 |
* 1 0 1 0 pcs+phy doesn't support outband |
| 1175 |
* 0 1 1 0 pcs required, phy doesn't support, invalid |
| 1176 |
* 1 1 1 0 pcs optional, phy doesn't support, outband |
| 1177 |
* 0 0 0 1 phy required inband enabled |
| 1178 |
* 1 0 0 1 pcs doesn't support, phy required, invalid |
| 1179 |
* 0 1 0 1 pcs+phy required inband enabled |
| 1180 |
* 1 1 0 1 pcs optional, phy required inband enabled |
| 1181 |
* 0 0 1 1 phy optional inband enabled |
| 1182 |
* 1 0 1 1 pcs doesn't support, phy optional, outband |
| 1183 |
* 0 1 1 1 pcs required, phy optional inband enabled |
| 1184 |
* 1 1 1 1 pcs+phy optional inband enabled |
| 1185 |
*/ |
| 1186 |
if ((!pcs_ib_caps || pcs_ib_caps & inband_ok) && |
| 1187 |
(!phy_ib_caps || phy_ib_caps & inband_ok)) { |
| 1188 |
/* In-band supported or unknown at both ends. Enable |
| 1189 |
* in-band mode with or without bypass at the PHY. |
| 1190 |
*/ |
| 1191 |
if (phy_ib_caps & LINK_INBAND_ENABLE) |
| 1192 |
pl->phy_ib_mode = LINK_INBAND_ENABLE; |
| 1193 |
else if (phy_ib_caps & LINK_INBAND_BYPASS) |
| 1194 |
pl->phy_ib_mode = LINK_INBAND_BYPASS; |
| 1195 |
|
| 1196 |
neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; |
| 1197 |
} else if ((!pcs_ib_caps || pcs_ib_caps & outband_ok) && |
| 1198 |
(!phy_ib_caps || phy_ib_caps & outband_ok)) { |
| 1199 |
/* Either in-band not supported at at least one end. |
| 1200 |
* In-band bypass at the other end is possible. |
| 1201 |
*/ |
| 1202 |
if (phy_ib_caps & LINK_INBAND_DISABLE) |
| 1203 |
pl->phy_ib_mode = LINK_INBAND_DISABLE; |
| 1204 |
else if (phy_ib_caps & LINK_INBAND_BYPASS) |
| 1205 |
pl->phy_ib_mode = LINK_INBAND_BYPASS; |
| 1206 |
|
| 1207 |
neg_mode = PHYLINK_PCS_NEG_OUTBAND; |
| 1208 |
if (pl->phydev) |
| 1209 |
mode = MLO_AN_PHY; |
| 1210 |
} else { |
| 1211 |
/* invalid */ |
| 1212 |
phylink_warn(pl, "%s: incompatible in-band capabilities, trying in-band", |
| 1213 |
phy_modes(interface)); |
| 1214 |
neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; |
| 1215 |
} |
| 1216 |
} else { |
| 1217 |
/* For Base-X without a PHY */ |
| 1218 |
if (pcs_ib_caps == LINK_INBAND_DISABLE) |
| 1219 |
/* If the PCS doesn't support inband, then inband must |
| 1220 |
* be disabled. |
| 1221 |
*/ |
| 1222 |
neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED; |
| 1223 |
else if (pcs_ib_caps == LINK_INBAND_ENABLE) |
| 1224 |
/* If the PCS requires inband, then inband must always |
| 1225 |
* be enabled. |
| 1226 |
*/ |
| 1227 |
neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; |
| 1228 |
else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 1229 |
advertising)) |
| 1230 |
neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; |
| 1231 |
else |
| 1232 |
neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED; |
| 1233 |
} |
| 1234 |
|
| 1235 |
pl->pcs_neg_mode = neg_mode; |
| 1236 |
pl->act_link_an_mode = mode; |
| 1237 |
} |
| 1238 |
|
| 1239 |
static void phylink_major_config(struct phylink *pl, bool restart, |
| 1240 |
const struct phylink_link_state *state) |
| 1241 |
{ |
| 1242 |
struct phylink_pcs *pcs = NULL; |
| 1243 |
bool pcs_changed = false; |
| 1244 |
unsigned int rate_kbd; |
| 1245 |
int err; |
| 1246 |
|
| 1247 |
phylink_dbg(pl, "major config, requested %s/%s\n", |
| 1248 |
phylink_an_mode_str(pl->req_link_an_mode), |
| 1249 |
phy_modes(state->interface)); |
| 1250 |
|
| 1251 |
pl->major_config_failed = false; |
| 1252 |
|
| 1253 |
if (pl->mac_ops->mac_select_pcs) { |
| 1254 |
pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface); |
| 1255 |
if (IS_ERR(pcs)) { |
| 1256 |
phylink_err(pl, |
| 1257 |
"mac_select_pcs unexpectedly failed: %pe\n", |
| 1258 |
pcs); |
| 1259 |
|
| 1260 |
pl->major_config_failed = true; |
| 1261 |
return; |
| 1262 |
} |
| 1263 |
|
| 1264 |
pcs_changed = pl->pcs != pcs; |
| 1265 |
} |
| 1266 |
|
| 1267 |
phylink_pcs_neg_mode(pl, pcs, state->interface, state->advertising); |
| 1268 |
|
| 1269 |
phylink_dbg(pl, "major config, active %s/%s/%s\n", |
| 1270 |
phylink_an_mode_str(pl->act_link_an_mode), |
| 1271 |
phylink_pcs_mode_str(pl->pcs_neg_mode), |
| 1272 |
phy_modes(state->interface)); |
| 1273 |
|
| 1274 |
phylink_pcs_poll_stop(pl); |
| 1275 |
|
| 1276 |
if (pl->mac_ops->mac_prepare) { |
| 1277 |
err = pl->mac_ops->mac_prepare(pl->config, pl->act_link_an_mode, |
| 1278 |
state->interface); |
| 1279 |
if (err < 0) { |
| 1280 |
phylink_err(pl, "mac_prepare failed: %pe\n", |
| 1281 |
ERR_PTR(err)); |
| 1282 |
pl->major_config_failed = true; |
| 1283 |
return; |
| 1284 |
} |
| 1285 |
} |
| 1286 |
|
| 1287 |
/* If we have a new PCS, switch to the new PCS after preparing the MAC |
| 1288 |
* for the change. |
| 1289 |
*/ |
| 1290 |
if (pcs_changed) { |
| 1291 |
phylink_pcs_disable(pl->pcs); |
| 1292 |
|
| 1293 |
if (pl->pcs) |
| 1294 |
pl->pcs->phylink = NULL; |
| 1295 |
|
| 1296 |
if (pcs) |
| 1297 |
pcs->phylink = pl; |
| 1298 |
|
| 1299 |
pl->pcs = pcs; |
| 1300 |
} |
| 1301 |
|
| 1302 |
if (pl->pcs) |
| 1303 |
phylink_pcs_pre_config(pl->pcs, state->interface); |
| 1304 |
|
| 1305 |
phylink_mac_config(pl, state); |
| 1306 |
|
| 1307 |
if (pl->pcs) { |
| 1308 |
err = phylink_pcs_post_config(pl->pcs, state->interface); |
| 1309 |
if (err < 0) { |
| 1310 |
phylink_err(pl, "pcs_post_config failed: %pe\n", |
| 1311 |
ERR_PTR(err)); |
| 1312 |
|
| 1313 |
pl->major_config_failed = true; |
| 1314 |
} |
| 1315 |
} |
| 1316 |
|
| 1317 |
if (pl->pcs_state == PCS_STATE_STARTING || pcs_changed) |
| 1318 |
phylink_pcs_enable(pl->pcs); |
| 1319 |
|
| 1320 |
err = phylink_pcs_config(pl->pcs, pl->pcs_neg_mode, state, |
| 1321 |
!!(pl->link_config.pause & MLO_PAUSE_AN)); |
| 1322 |
if (err < 0) { |
| 1323 |
phylink_err(pl, "pcs_config failed: %pe\n", ERR_PTR(err)); |
| 1324 |
pl->major_config_failed = true; |
| 1325 |
} else if (err > 0) { |
| 1326 |
restart = true; |
| 1327 |
} |
| 1328 |
|
| 1329 |
if (restart) |
| 1330 |
phylink_pcs_an_restart(pl); |
| 1331 |
|
| 1332 |
if (pl->mac_ops->mac_finish) { |
| 1333 |
err = pl->mac_ops->mac_finish(pl->config, pl->act_link_an_mode, |
| 1334 |
state->interface); |
| 1335 |
if (err < 0) { |
| 1336 |
phylink_err(pl, "mac_finish failed: %pe\n", |
| 1337 |
ERR_PTR(err)); |
| 1338 |
|
| 1339 |
pl->major_config_failed = true; |
| 1340 |
} |
| 1341 |
} |
| 1342 |
|
| 1343 |
if (pl->phydev && pl->phy_ib_mode) { |
| 1344 |
err = phy_config_inband(pl->phydev, pl->phy_ib_mode); |
| 1345 |
if (err < 0) { |
| 1346 |
phylink_err(pl, "phy_config_inband: %pe\n", |
| 1347 |
ERR_PTR(err)); |
| 1348 |
|
| 1349 |
pl->major_config_failed = true; |
| 1350 |
} |
| 1351 |
} |
| 1352 |
|
| 1353 |
if (pl->sfp_bus) { |
| 1354 |
rate_kbd = phylink_interface_signal_rate(state->interface); |
| 1355 |
if (rate_kbd) |
| 1356 |
sfp_upstream_set_signal_rate(pl->sfp_bus, rate_kbd); |
| 1357 |
} |
| 1358 |
|
| 1359 |
phylink_pcs_poll_start(pl); |
| 1360 |
} |
| 1361 |
|
| 1362 |
/* |
| 1363 |
* Reconfigure for a change of inband advertisement. |
| 1364 |
* If we have a separate PCS, we only need to call its pcs_config() method, |
| 1365 |
* and then restart AN if it indicates something changed. Otherwise, we do |
| 1366 |
* the full MAC reconfiguration. |
| 1367 |
*/ |
| 1368 |
static int phylink_change_inband_advert(struct phylink *pl) |
| 1369 |
{ |
| 1370 |
int ret; |
| 1371 |
|
| 1372 |
if (test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) |
| 1373 |
return 0; |
| 1374 |
|
| 1375 |
phylink_dbg(pl, "%s: mode=%s/%s adv=%*pb pause=%02x\n", __func__, |
| 1376 |
phylink_an_mode_str(pl->req_link_an_mode), |
| 1377 |
phy_modes(pl->link_config.interface), |
| 1378 |
__ETHTOOL_LINK_MODE_MASK_NBITS, pl->link_config.advertising, |
| 1379 |
pl->link_config.pause); |
| 1380 |
|
| 1381 |
/* Recompute the PCS neg mode */ |
| 1382 |
phylink_pcs_neg_mode(pl, pl->pcs, pl->link_config.interface, |
| 1383 |
pl->link_config.advertising); |
| 1384 |
|
| 1385 |
/* Modern PCS-based method; update the advert at the PCS, and |
| 1386 |
* restart negotiation if the pcs_config() helper indicates that |
| 1387 |
* the programmed advertisement has changed. |
| 1388 |
*/ |
| 1389 |
ret = phylink_pcs_config(pl->pcs, pl->pcs_neg_mode, &pl->link_config, |
| 1390 |
!!(pl->link_config.pause & MLO_PAUSE_AN)); |
| 1391 |
if (ret < 0) |
| 1392 |
return ret; |
| 1393 |
|
| 1394 |
if (ret > 0) |
| 1395 |
phylink_pcs_an_restart(pl); |
| 1396 |
|
| 1397 |
return 0; |
| 1398 |
} |
| 1399 |
|
| 1400 |
static void phylink_mac_pcs_get_state(struct phylink *pl, |
| 1401 |
struct phylink_link_state *state) |
| 1402 |
{ |
| 1403 |
struct phylink_pcs *pcs; |
| 1404 |
bool autoneg; |
| 1405 |
|
| 1406 |
linkmode_copy(state->advertising, pl->link_config.advertising); |
| 1407 |
linkmode_zero(state->lp_advertising); |
| 1408 |
state->interface = pl->link_config.interface; |
| 1409 |
state->rate_matching = pl->link_config.rate_matching; |
| 1410 |
state->an_complete = 0; |
| 1411 |
state->link = 1; |
| 1412 |
|
| 1413 |
autoneg = pl->pcs_neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED; |
| 1414 |
if (autoneg) { |
| 1415 |
state->speed = SPEED_UNKNOWN; |
| 1416 |
state->duplex = DUPLEX_UNKNOWN; |
| 1417 |
state->pause = MLO_PAUSE_NONE; |
| 1418 |
} else { |
| 1419 |
state->speed = pl->link_config.speed; |
| 1420 |
state->duplex = pl->link_config.duplex; |
| 1421 |
state->pause = pl->link_config.pause; |
| 1422 |
} |
| 1423 |
|
| 1424 |
pcs = pl->pcs; |
| 1425 |
if (pcs) |
| 1426 |
pcs->ops->pcs_get_state(pcs, pl->pcs_neg_mode, state); |
| 1427 |
else |
| 1428 |
state->link = 0; |
| 1429 |
} |
| 1430 |
|
| 1431 |
/* The fixed state is... fixed except for the link state, |
| 1432 |
* which may be determined by a GPIO or a callback. |
| 1433 |
*/ |
| 1434 |
static void phylink_get_fixed_state(struct phylink *pl, |
| 1435 |
struct phylink_link_state *state) |
| 1436 |
{ |
| 1437 |
*state = pl->link_config; |
| 1438 |
if (pl->config->get_fixed_state) |
| 1439 |
pl->config->get_fixed_state(pl->config, state); |
| 1440 |
else if (pl->link_gpio) |
| 1441 |
state->link = !!gpiod_get_value_cansleep(pl->link_gpio); |
| 1442 |
|
| 1443 |
state->pause = MLO_PAUSE_NONE; |
| 1444 |
phylink_resolve_an_pause(state); |
| 1445 |
} |
| 1446 |
|
| 1447 |
static void phylink_mac_initial_config(struct phylink *pl, bool force_restart) |
| 1448 |
{ |
| 1449 |
struct phylink_link_state link_state; |
| 1450 |
struct phy_device *phy = pl->phydev; |
| 1451 |
|
| 1452 |
switch (pl->req_link_an_mode) { |
| 1453 |
case MLO_AN_PHY: |
| 1454 |
link_state = pl->phy_state; |
| 1455 |
break; |
| 1456 |
|
| 1457 |
case MLO_AN_FIXED: |
| 1458 |
phylink_get_fixed_state(pl, &link_state); |
| 1459 |
break; |
| 1460 |
|
| 1461 |
case MLO_AN_INBAND: |
| 1462 |
link_state = pl->link_config; |
| 1463 |
if (link_state.interface == PHY_INTERFACE_MODE_SGMII) |
| 1464 |
link_state.pause = MLO_PAUSE_NONE; |
| 1465 |
break; |
| 1466 |
|
| 1467 |
default: /* can't happen */ |
| 1468 |
return; |
| 1469 |
} |
| 1470 |
|
| 1471 |
link_state.link = false; |
| 1472 |
|
| 1473 |
phylink_apply_manual_flow(pl, &link_state); |
| 1474 |
if (phy) |
| 1475 |
mutex_lock(&phy->lock); |
| 1476 |
phylink_major_config(pl, force_restart, &link_state); |
| 1477 |
if (phy) |
| 1478 |
mutex_unlock(&phy->lock); |
| 1479 |
} |
| 1480 |
|
| 1481 |
static const char *phylink_pause_to_str(int pause) |
| 1482 |
{ |
| 1483 |
switch (pause & MLO_PAUSE_TXRX_MASK) { |
| 1484 |
case MLO_PAUSE_TX | MLO_PAUSE_RX: |
| 1485 |
return "rx/tx"; |
| 1486 |
case MLO_PAUSE_TX: |
| 1487 |
return "tx"; |
| 1488 |
case MLO_PAUSE_RX: |
| 1489 |
return "rx"; |
| 1490 |
default: |
| 1491 |
return "off"; |
| 1492 |
} |
| 1493 |
} |
| 1494 |
|
| 1495 |
static void phylink_deactivate_lpi(struct phylink *pl) |
| 1496 |
{ |
| 1497 |
if (pl->mac_enable_tx_lpi) { |
| 1498 |
pl->mac_enable_tx_lpi = false; |
| 1499 |
|
| 1500 |
phylink_dbg(pl, "disabling LPI\n"); |
| 1501 |
|
| 1502 |
pl->mac_ops->mac_disable_tx_lpi(pl->config); |
| 1503 |
|
| 1504 |
phylink_pcs_disable_eee(pl->pcs); |
| 1505 |
} |
| 1506 |
} |
| 1507 |
|
| 1508 |
static void phylink_activate_lpi(struct phylink *pl) |
| 1509 |
{ |
| 1510 |
int err; |
| 1511 |
|
| 1512 |
if (!test_bit(pl->cur_interface, pl->config->lpi_interfaces)) { |
| 1513 |
phylink_dbg(pl, "MAC does not support LPI with %s\n", |
| 1514 |
phy_modes(pl->cur_interface)); |
| 1515 |
return; |
| 1516 |
} |
| 1517 |
|
| 1518 |
phylink_dbg(pl, "LPI timer %uus, tx clock stop %u\n", |
| 1519 |
pl->mac_tx_lpi_timer, pl->mac_tx_clk_stop); |
| 1520 |
|
| 1521 |
phylink_pcs_enable_eee(pl->pcs); |
| 1522 |
|
| 1523 |
err = pl->mac_ops->mac_enable_tx_lpi(pl->config, pl->mac_tx_lpi_timer, |
| 1524 |
pl->mac_tx_clk_stop); |
| 1525 |
if (err) { |
| 1526 |
phylink_pcs_disable_eee(pl->pcs); |
| 1527 |
phylink_err(pl, "%ps() failed: %pe\n", |
| 1528 |
pl->mac_ops->mac_enable_tx_lpi, ERR_PTR(err)); |
| 1529 |
return; |
| 1530 |
} |
| 1531 |
|
| 1532 |
pl->mac_enable_tx_lpi = true; |
| 1533 |
} |
| 1534 |
|
| 1535 |
static void phylink_link_up(struct phylink *pl, |
| 1536 |
struct phylink_link_state link_state) |
| 1537 |
{ |
| 1538 |
struct net_device *ndev = pl->netdev; |
| 1539 |
int speed, duplex; |
| 1540 |
bool rx_pause; |
| 1541 |
|
| 1542 |
speed = link_state.speed; |
| 1543 |
duplex = link_state.duplex; |
| 1544 |
rx_pause = !!(link_state.pause & MLO_PAUSE_RX); |
| 1545 |
|
| 1546 |
switch (link_state.rate_matching) { |
| 1547 |
case RATE_MATCH_PAUSE: |
| 1548 |
/* The PHY is doing rate matchion from the media rate (in |
| 1549 |
* the link_state) to the interface speed, and will send |
| 1550 |
* pause frames to the MAC to limit its transmission speed. |
| 1551 |
*/ |
| 1552 |
speed = phylink_interface_max_speed(link_state.interface); |
| 1553 |
duplex = DUPLEX_FULL; |
| 1554 |
rx_pause = true; |
| 1555 |
break; |
| 1556 |
|
| 1557 |
case RATE_MATCH_CRS: |
| 1558 |
/* The PHY is doing rate matchion from the media rate (in |
| 1559 |
* the link_state) to the interface speed, and will cause |
| 1560 |
* collisions to the MAC to limit its transmission speed. |
| 1561 |
*/ |
| 1562 |
speed = phylink_interface_max_speed(link_state.interface); |
| 1563 |
duplex = DUPLEX_HALF; |
| 1564 |
break; |
| 1565 |
} |
| 1566 |
|
| 1567 |
pl->cur_interface = link_state.interface; |
| 1568 |
|
| 1569 |
phylink_pcs_link_up(pl->pcs, pl->pcs_neg_mode, pl->cur_interface, speed, |
| 1570 |
duplex); |
| 1571 |
|
| 1572 |
pl->mac_ops->mac_link_up(pl->config, pl->phydev, pl->act_link_an_mode, |
| 1573 |
pl->cur_interface, speed, duplex, |
| 1574 |
!!(link_state.pause & MLO_PAUSE_TX), rx_pause); |
| 1575 |
|
| 1576 |
if (pl->mac_supports_eee && pl->phy_enable_tx_lpi) |
| 1577 |
phylink_activate_lpi(pl); |
| 1578 |
|
| 1579 |
if (ndev) |
| 1580 |
netif_carrier_on(ndev); |
| 1581 |
|
| 1582 |
phylink_info(pl, |
| 1583 |
"Link is Up - %s/%s - flow control %s\n", |
| 1584 |
phy_speed_to_str(link_state.speed), |
| 1585 |
phy_duplex_to_str(link_state.duplex), |
| 1586 |
phylink_pause_to_str(link_state.pause)); |
| 1587 |
} |
| 1588 |
|
| 1589 |
static void phylink_link_down(struct phylink *pl) |
| 1590 |
{ |
| 1591 |
struct net_device *ndev = pl->netdev; |
| 1592 |
|
| 1593 |
if (ndev) |
| 1594 |
netif_carrier_off(ndev); |
| 1595 |
|
| 1596 |
phylink_deactivate_lpi(pl); |
| 1597 |
|
| 1598 |
pl->mac_ops->mac_link_down(pl->config, pl->act_link_an_mode, |
| 1599 |
pl->cur_interface); |
| 1600 |
phylink_info(pl, "Link is Down\n"); |
| 1601 |
} |
| 1602 |
|
| 1603 |
static bool phylink_link_is_up(struct phylink *pl) |
| 1604 |
{ |
| 1605 |
return pl->netdev ? netif_carrier_ok(pl->netdev) : pl->old_link_state; |
| 1606 |
} |
| 1607 |
|
| 1608 |
static void phylink_resolve(struct work_struct *w) |
| 1609 |
{ |
| 1610 |
struct phylink *pl = container_of(w, struct phylink, resolve); |
| 1611 |
struct phylink_link_state link_state; |
| 1612 |
bool mac_config = false; |
| 1613 |
bool retrigger = false; |
| 1614 |
struct phy_device *phy; |
| 1615 |
bool cur_link_state; |
| 1616 |
|
| 1617 |
mutex_lock(&pl->phydev_mutex); |
| 1618 |
phy = pl->phydev; |
| 1619 |
if (phy) |
| 1620 |
mutex_lock(&phy->lock); |
| 1621 |
mutex_lock(&pl->state_mutex); |
| 1622 |
cur_link_state = phylink_link_is_up(pl); |
| 1623 |
|
| 1624 |
if (pl->phylink_disable_state) { |
| 1625 |
pl->link_failed = false; |
| 1626 |
link_state.link = false; |
| 1627 |
} else if (pl->link_failed) { |
| 1628 |
link_state.link = false; |
| 1629 |
retrigger = true; |
| 1630 |
} else if (pl->act_link_an_mode == MLO_AN_FIXED) { |
| 1631 |
phylink_get_fixed_state(pl, &link_state); |
| 1632 |
mac_config = link_state.link; |
| 1633 |
} else if (pl->act_link_an_mode == MLO_AN_PHY) { |
| 1634 |
link_state = pl->phy_state; |
| 1635 |
mac_config = link_state.link; |
| 1636 |
} else { |
| 1637 |
phylink_mac_pcs_get_state(pl, &link_state); |
| 1638 |
|
| 1639 |
/* The PCS may have a latching link-fail indicator. If the link |
| 1640 |
* was up, bring the link down and re-trigger the resolve. |
| 1641 |
* Otherwise, re-read the PCS state to get the current status |
| 1642 |
* of the link. |
| 1643 |
*/ |
| 1644 |
if (!link_state.link) { |
| 1645 |
if (cur_link_state) |
| 1646 |
retrigger = true; |
| 1647 |
else |
| 1648 |
phylink_mac_pcs_get_state(pl, &link_state); |
| 1649 |
} |
| 1650 |
|
| 1651 |
/* If we have a phy, the "up" state is the union of both the |
| 1652 |
* PHY and the MAC |
| 1653 |
*/ |
| 1654 |
if (phy) |
| 1655 |
link_state.link &= pl->phy_state.link; |
| 1656 |
|
| 1657 |
/* Only update if the PHY link is up */ |
| 1658 |
if (phy && pl->phy_state.link) { |
| 1659 |
/* If the interface has changed, force a link down |
| 1660 |
* event if the link isn't already down, and re-resolve. |
| 1661 |
*/ |
| 1662 |
if (link_state.interface != pl->phy_state.interface) { |
| 1663 |
retrigger = true; |
| 1664 |
link_state.link = false; |
| 1665 |
} |
| 1666 |
|
| 1667 |
link_state.interface = pl->phy_state.interface; |
| 1668 |
|
| 1669 |
/* If we are doing rate matching, then the link |
| 1670 |
* speed/duplex comes from the PHY |
| 1671 |
*/ |
| 1672 |
if (pl->phy_state.rate_matching) { |
| 1673 |
link_state.rate_matching = |
| 1674 |
pl->phy_state.rate_matching; |
| 1675 |
link_state.speed = pl->phy_state.speed; |
| 1676 |
link_state.duplex = pl->phy_state.duplex; |
| 1677 |
} |
| 1678 |
|
| 1679 |
/* If we have a PHY, we need to update with the PHY |
| 1680 |
* flow control bits. |
| 1681 |
*/ |
| 1682 |
link_state.pause = pl->phy_state.pause; |
| 1683 |
mac_config = true; |
| 1684 |
} |
| 1685 |
} |
| 1686 |
|
| 1687 |
if (pl->act_link_an_mode != MLO_AN_FIXED) |
| 1688 |
phylink_apply_manual_flow(pl, &link_state); |
| 1689 |
|
| 1690 |
if ((mac_config && link_state.interface != pl->link_config.interface) || |
| 1691 |
pl->force_major_config) { |
| 1692 |
/* The interface has changed or a forced major configuration |
| 1693 |
* was requested, so force the link down and then reconfigure. |
| 1694 |
*/ |
| 1695 |
if (cur_link_state) { |
| 1696 |
phylink_link_down(pl); |
| 1697 |
cur_link_state = false; |
| 1698 |
} |
| 1699 |
phylink_major_config(pl, false, &link_state); |
| 1700 |
pl->link_config.interface = link_state.interface; |
| 1701 |
pl->force_major_config = false; |
| 1702 |
} |
| 1703 |
|
| 1704 |
/* If configuration of the interface failed, force the link down |
| 1705 |
* until we get a successful configuration. |
| 1706 |
*/ |
| 1707 |
if (pl->major_config_failed) |
| 1708 |
link_state.link = false; |
| 1709 |
|
| 1710 |
if (link_state.link != cur_link_state) { |
| 1711 |
pl->old_link_state = link_state.link; |
| 1712 |
if (!link_state.link) |
| 1713 |
phylink_link_down(pl); |
| 1714 |
else |
| 1715 |
phylink_link_up(pl, link_state); |
| 1716 |
} |
| 1717 |
if (!link_state.link && retrigger) { |
| 1718 |
pl->link_failed = false; |
| 1719 |
queue_work(system_power_efficient_wq, &pl->resolve); |
| 1720 |
} |
| 1721 |
mutex_unlock(&pl->state_mutex); |
| 1722 |
if (phy) |
| 1723 |
mutex_unlock(&phy->lock); |
| 1724 |
mutex_unlock(&pl->phydev_mutex); |
| 1725 |
} |
| 1726 |
|
| 1727 |
static void phylink_run_resolve(struct phylink *pl) |
| 1728 |
{ |
| 1729 |
if (!pl->phylink_disable_state) |
| 1730 |
queue_work(system_power_efficient_wq, &pl->resolve); |
| 1731 |
} |
| 1732 |
|
| 1733 |
static void phylink_run_resolve_and_disable(struct phylink *pl, int bit) |
| 1734 |
{ |
| 1735 |
unsigned long state = pl->phylink_disable_state; |
| 1736 |
|
| 1737 |
set_bit(bit, &pl->phylink_disable_state); |
| 1738 |
if (state == 0) { |
| 1739 |
queue_work(system_power_efficient_wq, &pl->resolve); |
| 1740 |
flush_work(&pl->resolve); |
| 1741 |
} |
| 1742 |
} |
| 1743 |
|
| 1744 |
static void phylink_enable_and_run_resolve(struct phylink *pl, int bit) |
| 1745 |
{ |
| 1746 |
clear_bit(bit, &pl->phylink_disable_state); |
| 1747 |
phylink_run_resolve(pl); |
| 1748 |
} |
| 1749 |
|
| 1750 |
static void phylink_fixed_poll(struct timer_list *t) |
| 1751 |
{ |
| 1752 |
struct phylink *pl = container_of(t, struct phylink, link_poll); |
| 1753 |
|
| 1754 |
mod_timer(t, jiffies + HZ); |
| 1755 |
|
| 1756 |
phylink_run_resolve(pl); |
| 1757 |
} |
| 1758 |
|
| 1759 |
static const struct sfp_upstream_ops sfp_phylink_ops; |
| 1760 |
|
| 1761 |
static int phylink_register_sfp(struct phylink *pl, |
| 1762 |
const struct fwnode_handle *fwnode) |
| 1763 |
{ |
| 1764 |
struct sfp_bus *bus; |
| 1765 |
int ret; |
| 1766 |
|
| 1767 |
if (!fwnode) |
| 1768 |
return 0; |
| 1769 |
|
| 1770 |
bus = sfp_bus_find_fwnode(fwnode); |
| 1771 |
if (IS_ERR(bus)) { |
| 1772 |
phylink_err(pl, "unable to attach SFP bus: %pe\n", bus); |
| 1773 |
return PTR_ERR(bus); |
| 1774 |
} |
| 1775 |
|
| 1776 |
pl->sfp_bus = bus; |
| 1777 |
|
| 1778 |
ret = sfp_bus_add_upstream(bus, pl, &sfp_phylink_ops); |
| 1779 |
sfp_bus_put(bus); |
| 1780 |
|
| 1781 |
return ret; |
| 1782 |
} |
| 1783 |
|
| 1784 |
/** |
| 1785 |
* phylink_set_fixed_link() - set the fixed link |
| 1786 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 1787 |
* @state: a pointer to a struct phylink_link_state. |
| 1788 |
* |
| 1789 |
* This function is used when the link parameters are known and do not change, |
| 1790 |
* making it suitable for certain types of network connections. |
| 1791 |
* |
| 1792 |
* Returns: zero on success or negative error code. |
| 1793 |
*/ |
| 1794 |
int phylink_set_fixed_link(struct phylink *pl, |
| 1795 |
const struct phylink_link_state *state) |
| 1796 |
{ |
| 1797 |
const struct link_capabilities *c; |
| 1798 |
unsigned long *adv; |
| 1799 |
|
| 1800 |
if (pl->cfg_link_an_mode != MLO_AN_PHY || !state || |
| 1801 |
!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) |
| 1802 |
return -EINVAL; |
| 1803 |
|
| 1804 |
c = phy_caps_lookup(state->speed, state->duplex, |
| 1805 |
pl->supported, true); |
| 1806 |
if (!c) |
| 1807 |
return -EINVAL; |
| 1808 |
|
| 1809 |
adv = pl->link_config.advertising; |
| 1810 |
linkmode_and(adv, pl->supported, c->linkmodes); |
| 1811 |
linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, adv); |
| 1812 |
|
| 1813 |
pl->link_config.speed = state->speed; |
| 1814 |
pl->link_config.duplex = state->duplex; |
| 1815 |
pl->link_config.link = 1; |
| 1816 |
pl->link_config.an_complete = 1; |
| 1817 |
|
| 1818 |
pl->cfg_link_an_mode = MLO_AN_FIXED; |
| 1819 |
pl->req_link_an_mode = pl->cfg_link_an_mode; |
| 1820 |
|
| 1821 |
return 0; |
| 1822 |
} |
| 1823 |
EXPORT_SYMBOL_GPL(phylink_set_fixed_link); |
| 1824 |
|
| 1825 |
/** |
| 1826 |
* phylink_create() - create a phylink instance |
| 1827 |
* @config: a pointer to the target &struct phylink_config |
| 1828 |
* @fwnode: a pointer to a &struct fwnode_handle describing the network |
| 1829 |
* interface |
| 1830 |
* @iface: the desired link mode defined by &typedef phy_interface_t |
| 1831 |
* @mac_ops: a pointer to a &struct phylink_mac_ops for the MAC. |
| 1832 |
* |
| 1833 |
* Create a new phylink instance, and parse the link parameters found in @np. |
| 1834 |
* This will parse in-band modes, fixed-link or SFP configuration. |
| 1835 |
* |
| 1836 |
* Note: the rtnl lock must not be held when calling this function. |
| 1837 |
* |
| 1838 |
* Returns a pointer to a &struct phylink, or an error-pointer value. Users |
| 1839 |
* must use IS_ERR() to check for errors from this function. |
| 1840 |
*/ |
| 1841 |
struct phylink *phylink_create(struct phylink_config *config, |
| 1842 |
const struct fwnode_handle *fwnode, |
| 1843 |
phy_interface_t iface, |
| 1844 |
const struct phylink_mac_ops *mac_ops) |
| 1845 |
{ |
| 1846 |
struct phylink *pl; |
| 1847 |
int ret; |
| 1848 |
|
| 1849 |
/* Validate the supplied configuration */ |
| 1850 |
if (phy_interface_empty(config->supported_interfaces)) { |
| 1851 |
dev_err(config->dev, |
| 1852 |
"phylink: error: empty supported_interfaces\n"); |
| 1853 |
return ERR_PTR(-EINVAL); |
| 1854 |
} |
| 1855 |
|
| 1856 |
pl = kzalloc_obj(*pl); |
| 1857 |
if (!pl) |
| 1858 |
return ERR_PTR(-ENOMEM); |
| 1859 |
|
| 1860 |
mutex_init(&pl->phydev_mutex); |
| 1861 |
mutex_init(&pl->state_mutex); |
| 1862 |
INIT_WORK(&pl->resolve, phylink_resolve); |
| 1863 |
|
| 1864 |
pl->config = config; |
| 1865 |
if (config->type == PHYLINK_NETDEV) { |
| 1866 |
pl->netdev = to_net_dev(config->dev); |
| 1867 |
netif_carrier_off(pl->netdev); |
| 1868 |
} else if (config->type == PHYLINK_DEV) { |
| 1869 |
pl->dev = config->dev; |
| 1870 |
} else { |
| 1871 |
kfree(pl); |
| 1872 |
return ERR_PTR(-EINVAL); |
| 1873 |
} |
| 1874 |
|
| 1875 |
pl->mac_supports_eee_ops = phylink_mac_implements_lpi(mac_ops); |
| 1876 |
pl->mac_supports_eee = pl->mac_supports_eee_ops && |
| 1877 |
pl->config->lpi_capabilities && |
| 1878 |
!phy_interface_empty(pl->config->lpi_interfaces); |
| 1879 |
|
| 1880 |
/* Set the default EEE configuration */ |
| 1881 |
pl->eee_cfg.eee_enabled = pl->config->eee_enabled_default; |
| 1882 |
pl->eee_cfg.tx_lpi_enabled = pl->eee_cfg.eee_enabled; |
| 1883 |
pl->eee_cfg.tx_lpi_timer = pl->config->lpi_timer_default; |
| 1884 |
|
| 1885 |
pl->phy_state.interface = iface; |
| 1886 |
pl->link_interface = iface; |
| 1887 |
if (iface == PHY_INTERFACE_MODE_MOCA) |
| 1888 |
pl->link_port = PORT_BNC; |
| 1889 |
else |
| 1890 |
pl->link_port = PORT_MII; |
| 1891 |
pl->link_config.interface = iface; |
| 1892 |
pl->link_config.pause = MLO_PAUSE_AN; |
| 1893 |
pl->link_config.speed = SPEED_UNKNOWN; |
| 1894 |
pl->link_config.duplex = DUPLEX_UNKNOWN; |
| 1895 |
pl->pcs_state = PCS_STATE_DOWN; |
| 1896 |
pl->mac_ops = mac_ops; |
| 1897 |
__set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); |
| 1898 |
timer_setup(&pl->link_poll, phylink_fixed_poll, 0); |
| 1899 |
|
| 1900 |
linkmode_fill(pl->supported); |
| 1901 |
linkmode_copy(pl->link_config.advertising, pl->supported); |
| 1902 |
phylink_validate(pl, pl->supported, &pl->link_config); |
| 1903 |
|
| 1904 |
ret = phylink_parse_mode(pl, fwnode); |
| 1905 |
if (ret < 0) { |
| 1906 |
kfree(pl); |
| 1907 |
return ERR_PTR(ret); |
| 1908 |
} |
| 1909 |
|
| 1910 |
if (pl->cfg_link_an_mode == MLO_AN_FIXED) { |
| 1911 |
ret = phylink_parse_fixedlink(pl, fwnode); |
| 1912 |
if (ret < 0) { |
| 1913 |
kfree(pl); |
| 1914 |
return ERR_PTR(ret); |
| 1915 |
} |
| 1916 |
} |
| 1917 |
|
| 1918 |
pl->req_link_an_mode = pl->cfg_link_an_mode; |
| 1919 |
|
| 1920 |
ret = phylink_register_sfp(pl, fwnode); |
| 1921 |
if (ret < 0) { |
| 1922 |
kfree(pl); |
| 1923 |
return ERR_PTR(ret); |
| 1924 |
} |
| 1925 |
|
| 1926 |
return pl; |
| 1927 |
} |
| 1928 |
EXPORT_SYMBOL_GPL(phylink_create); |
| 1929 |
|
| 1930 |
/** |
| 1931 |
* phylink_destroy() - cleanup and destroy the phylink instance |
| 1932 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 1933 |
* |
| 1934 |
* Destroy a phylink instance. Any PHY that has been attached must have been |
| 1935 |
* cleaned up via phylink_disconnect_phy() prior to calling this function. |
| 1936 |
* |
| 1937 |
* Note: the rtnl lock must not be held when calling this function. |
| 1938 |
*/ |
| 1939 |
void phylink_destroy(struct phylink *pl) |
| 1940 |
{ |
| 1941 |
sfp_bus_del_upstream(pl->sfp_bus); |
| 1942 |
if (pl->link_gpio) |
| 1943 |
gpiod_put(pl->link_gpio); |
| 1944 |
|
| 1945 |
cancel_work_sync(&pl->resolve); |
| 1946 |
kfree(pl); |
| 1947 |
} |
| 1948 |
EXPORT_SYMBOL_GPL(phylink_destroy); |
| 1949 |
|
| 1950 |
/** |
| 1951 |
* phylink_expects_phy() - Determine if phylink expects a phy to be attached |
| 1952 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 1953 |
* |
| 1954 |
* When using fixed-link mode, or in-band mode with 1000base-X or 2500base-X, |
| 1955 |
* no PHY is needed. |
| 1956 |
* |
| 1957 |
* Returns true if phylink will be expecting a PHY. |
| 1958 |
*/ |
| 1959 |
bool phylink_expects_phy(struct phylink *pl) |
| 1960 |
{ |
| 1961 |
if (pl->cfg_link_an_mode == MLO_AN_FIXED || |
| 1962 |
(pl->cfg_link_an_mode == MLO_AN_INBAND && |
| 1963 |
phy_interface_mode_is_8023z(pl->link_interface))) |
| 1964 |
return false; |
| 1965 |
return true; |
| 1966 |
} |
| 1967 |
EXPORT_SYMBOL_GPL(phylink_expects_phy); |
| 1968 |
|
| 1969 |
static void phylink_phy_change(struct phy_device *phydev, bool up) |
| 1970 |
{ |
| 1971 |
struct phylink *pl = phydev->phylink; |
| 1972 |
bool tx_pause, rx_pause; |
| 1973 |
|
| 1974 |
phy_get_pause(phydev, &tx_pause, &rx_pause); |
| 1975 |
|
| 1976 |
mutex_lock(&pl->state_mutex); |
| 1977 |
pl->phy_state.speed = phydev->speed; |
| 1978 |
pl->phy_state.duplex = phydev->duplex; |
| 1979 |
pl->phy_state.rate_matching = phydev->rate_matching; |
| 1980 |
pl->phy_state.pause = MLO_PAUSE_NONE; |
| 1981 |
if (tx_pause) |
| 1982 |
pl->phy_state.pause |= MLO_PAUSE_TX; |
| 1983 |
if (rx_pause) |
| 1984 |
pl->phy_state.pause |= MLO_PAUSE_RX; |
| 1985 |
pl->phy_state.interface = phydev->interface; |
| 1986 |
pl->phy_state.link = up; |
| 1987 |
if (!up) |
| 1988 |
pl->link_failed = true; |
| 1989 |
|
| 1990 |
/* Get the LPI state from phylib */ |
| 1991 |
pl->phy_enable_tx_lpi = phydev->enable_tx_lpi; |
| 1992 |
pl->mac_tx_lpi_timer = phydev->eee_cfg.tx_lpi_timer; |
| 1993 |
mutex_unlock(&pl->state_mutex); |
| 1994 |
|
| 1995 |
phylink_run_resolve(pl); |
| 1996 |
|
| 1997 |
phylink_dbg(pl, "phy link %s %s/%s/%s/%s/%s/%slpi\n", |
| 1998 |
up ? "up" : "down", |
| 1999 |
phy_modes(phydev->interface), |
| 2000 |
phy_speed_to_str(phydev->speed), |
| 2001 |
phy_duplex_to_str(phydev->duplex), |
| 2002 |
phy_rate_matching_to_str(phydev->rate_matching), |
| 2003 |
phylink_pause_to_str(pl->phy_state.pause), |
| 2004 |
phydev->enable_tx_lpi ? "" : "no"); |
| 2005 |
} |
| 2006 |
|
| 2007 |
static int phylink_validate_phy(struct phylink *pl, struct phy_device *phy, |
| 2008 |
unsigned long *supported, |
| 2009 |
struct phylink_link_state *state) |
| 2010 |
{ |
| 2011 |
DECLARE_PHY_INTERFACE_MASK(interfaces); |
| 2012 |
|
| 2013 |
/* If the PHY provides a bitmap of the interfaces it will be using |
| 2014 |
* depending on the negotiated media speeds, use this to validate |
| 2015 |
* which ethtool link modes can be used. |
| 2016 |
*/ |
| 2017 |
if (!phy_interface_empty(phy->possible_interfaces)) { |
| 2018 |
/* We only care about the union of the PHY's interfaces and |
| 2019 |
* those which the host supports. |
| 2020 |
*/ |
| 2021 |
phy_interface_and(interfaces, phy->possible_interfaces, |
| 2022 |
pl->config->supported_interfaces); |
| 2023 |
|
| 2024 |
if (phy_interface_empty(interfaces)) { |
| 2025 |
phylink_err(pl, "PHY has no common interfaces\n"); |
| 2026 |
return -EINVAL; |
| 2027 |
} |
| 2028 |
|
| 2029 |
if (phy_on_sfp(phy)) { |
| 2030 |
/* If the PHY is on a SFP, limit the interfaces to |
| 2031 |
* those that can be used with a SFP module. |
| 2032 |
*/ |
| 2033 |
phy_interface_and(interfaces, interfaces, |
| 2034 |
phylink_sfp_interfaces); |
| 2035 |
|
| 2036 |
if (phy_interface_empty(interfaces)) { |
| 2037 |
phylink_err(pl, "SFP PHY's possible interfaces becomes empty\n"); |
| 2038 |
return -EINVAL; |
| 2039 |
} |
| 2040 |
} |
| 2041 |
|
| 2042 |
phylink_dbg(pl, "PHY %s uses interfaces %*pbl, validating %*pbl\n", |
| 2043 |
phydev_name(phy), |
| 2044 |
(int)PHY_INTERFACE_MODE_MAX, |
| 2045 |
phy->possible_interfaces, |
| 2046 |
(int)PHY_INTERFACE_MODE_MAX, interfaces); |
| 2047 |
|
| 2048 |
return phylink_validate_mask(pl, phy, supported, state, |
| 2049 |
interfaces); |
| 2050 |
} |
| 2051 |
|
| 2052 |
phylink_dbg(pl, "PHY %s doesn't supply possible interfaces\n", |
| 2053 |
phydev_name(phy)); |
| 2054 |
|
| 2055 |
/* Check whether we would use rate matching for the proposed interface |
| 2056 |
* mode. |
| 2057 |
*/ |
| 2058 |
state->rate_matching = phy_get_rate_matching(phy, state->interface); |
| 2059 |
|
| 2060 |
/* Clause 45 PHYs may switch their Serdes lane between, e.g. 10GBASE-R, |
| 2061 |
* 5GBASE-R, 2500BASE-X and SGMII if they are not using rate matching. |
| 2062 |
* For some interface modes (e.g. RXAUI, XAUI and USXGMII) switching |
| 2063 |
* their Serdes is either unnecessary or not reasonable. |
| 2064 |
* |
| 2065 |
* For these which switch interface modes, we really need to know which |
| 2066 |
* interface modes the PHY supports to properly work out which ethtool |
| 2067 |
* linkmodes can be supported. For now, as a work-around, we validate |
| 2068 |
* against all interface modes, which may lead to more ethtool link |
| 2069 |
* modes being advertised than are actually supported. |
| 2070 |
*/ |
| 2071 |
if (phy->is_c45 && state->rate_matching == RATE_MATCH_NONE && |
| 2072 |
state->interface != PHY_INTERFACE_MODE_RXAUI && |
| 2073 |
state->interface != PHY_INTERFACE_MODE_XAUI && |
| 2074 |
state->interface != PHY_INTERFACE_MODE_USXGMII) |
| 2075 |
state->interface = PHY_INTERFACE_MODE_NA; |
| 2076 |
|
| 2077 |
return phylink_validate(pl, supported, state); |
| 2078 |
} |
| 2079 |
|
| 2080 |
static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy, |
| 2081 |
phy_interface_t interface) |
| 2082 |
{ |
| 2083 |
struct phylink_link_state config; |
| 2084 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported); |
| 2085 |
char *irq_str; |
| 2086 |
int ret; |
| 2087 |
|
| 2088 |
/* |
| 2089 |
* This is the new way of dealing with flow control for PHYs, |
| 2090 |
* as described by Timur Tabi in commit 529ed1275263 ("net: phy: |
| 2091 |
* phy drivers should not set SUPPORTED_[Asym_]Pause") except |
| 2092 |
* using our validate call to the MAC, we rely upon the MAC |
| 2093 |
* clearing the bits from both supported and advertising fields. |
| 2094 |
*/ |
| 2095 |
phy_support_asym_pause(phy); |
| 2096 |
|
| 2097 |
memset(&config, 0, sizeof(config)); |
| 2098 |
linkmode_copy(supported, phy->supported); |
| 2099 |
linkmode_copy(config.advertising, phy->advertising); |
| 2100 |
config.interface = interface; |
| 2101 |
|
| 2102 |
ret = phylink_validate_phy(pl, phy, supported, &config); |
| 2103 |
if (ret) { |
| 2104 |
phylink_warn(pl, "validation of %s with support %*pb and advertisement %*pb failed: %pe\n", |
| 2105 |
phy_modes(config.interface), |
| 2106 |
__ETHTOOL_LINK_MODE_MASK_NBITS, phy->supported, |
| 2107 |
__ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising, |
| 2108 |
ERR_PTR(ret)); |
| 2109 |
return ret; |
| 2110 |
} |
| 2111 |
|
| 2112 |
phy->phylink = pl; |
| 2113 |
phy->phy_link_change = phylink_phy_change; |
| 2114 |
|
| 2115 |
irq_str = phy_attached_info_irq(phy); |
| 2116 |
phylink_info(pl, |
| 2117 |
"PHY [%s] driver [%s] (irq=%s)\n", |
| 2118 |
dev_name(&phy->mdio.dev), phy->drv->name, irq_str); |
| 2119 |
kfree(irq_str); |
| 2120 |
|
| 2121 |
mutex_lock(&pl->phydev_mutex); |
| 2122 |
mutex_lock(&phy->lock); |
| 2123 |
mutex_lock(&pl->state_mutex); |
| 2124 |
pl->phydev = phy; |
| 2125 |
pl->phy_state.interface = interface; |
| 2126 |
pl->phy_state.pause = MLO_PAUSE_NONE; |
| 2127 |
pl->phy_state.speed = SPEED_UNKNOWN; |
| 2128 |
pl->phy_state.duplex = DUPLEX_UNKNOWN; |
| 2129 |
pl->phy_state.rate_matching = RATE_MATCH_NONE; |
| 2130 |
linkmode_copy(pl->supported, supported); |
| 2131 |
linkmode_copy(pl->link_config.advertising, config.advertising); |
| 2132 |
|
| 2133 |
/* Restrict the phy advertisement according to the MAC support. */ |
| 2134 |
linkmode_copy(phy->advertising, config.advertising); |
| 2135 |
|
| 2136 |
/* If the MAC supports phylink managed EEE, restrict the EEE |
| 2137 |
* advertisement according to the MAC's LPI capabilities. |
| 2138 |
*/ |
| 2139 |
if (pl->mac_supports_eee) { |
| 2140 |
/* If EEE is enabled, then we need to call phy_support_eee() |
| 2141 |
* to ensure that the advertising mask is appropriately set. |
| 2142 |
* This also enables EEE at the PHY. |
| 2143 |
*/ |
| 2144 |
if (pl->eee_cfg.eee_enabled) |
| 2145 |
phy_support_eee(phy); |
| 2146 |
|
| 2147 |
phy->eee_cfg.tx_lpi_enabled = pl->eee_cfg.tx_lpi_enabled; |
| 2148 |
phy->eee_cfg.tx_lpi_timer = pl->eee_cfg.tx_lpi_timer; |
| 2149 |
|
| 2150 |
/* Convert the MAC's LPI capabilities to linkmodes */ |
| 2151 |
linkmode_zero(pl->supported_lpi); |
| 2152 |
phylink_caps_to_linkmodes(pl->supported_lpi, |
| 2153 |
pl->config->lpi_capabilities); |
| 2154 |
|
| 2155 |
/* Restrict the PHYs EEE support/advertisement to the modes |
| 2156 |
* that the MAC supports. |
| 2157 |
*/ |
| 2158 |
linkmode_and(phy->advertising_eee, phy->advertising_eee, |
| 2159 |
pl->supported_lpi); |
| 2160 |
} else if (pl->mac_supports_eee_ops) { |
| 2161 |
/* MAC supports phylink EEE, but wants EEE always disabled. */ |
| 2162 |
phy_disable_eee(phy); |
| 2163 |
} |
| 2164 |
|
| 2165 |
mutex_unlock(&pl->state_mutex); |
| 2166 |
mutex_unlock(&phy->lock); |
| 2167 |
mutex_unlock(&pl->phydev_mutex); |
| 2168 |
|
| 2169 |
phylink_dbg(pl, |
| 2170 |
"phy: %s setting supported %*pb advertising %*pb\n", |
| 2171 |
phy_modes(interface), |
| 2172 |
__ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported, |
| 2173 |
__ETHTOOL_LINK_MODE_MASK_NBITS, phy->advertising); |
| 2174 |
|
| 2175 |
if (pl->config->mac_managed_pm) |
| 2176 |
phy->mac_managed_pm = true; |
| 2177 |
|
| 2178 |
/* Allow the MAC to stop its clock if the PHY has the capability */ |
| 2179 |
pl->mac_tx_clk_stop = phy_eee_tx_clock_stop_capable(phy) > 0; |
| 2180 |
|
| 2181 |
if (pl->mac_supports_eee_ops) { |
| 2182 |
/* Explicitly configure whether the PHY is allowed to stop it's |
| 2183 |
* receive clock. |
| 2184 |
*/ |
| 2185 |
ret = phy_eee_rx_clock_stop(phy, |
| 2186 |
pl->config->eee_rx_clk_stop_enable); |
| 2187 |
if (ret == -EOPNOTSUPP) |
| 2188 |
ret = 0; |
| 2189 |
} |
| 2190 |
|
| 2191 |
if (ret == 0 && phy_interrupt_is_valid(phy)) |
| 2192 |
phy_request_interrupt(phy); |
| 2193 |
|
| 2194 |
return ret; |
| 2195 |
} |
| 2196 |
|
| 2197 |
static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy, |
| 2198 |
phy_interface_t interface) |
| 2199 |
{ |
| 2200 |
u32 flags = 0; |
| 2201 |
|
| 2202 |
if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED || |
| 2203 |
(pl->cfg_link_an_mode == MLO_AN_INBAND && |
| 2204 |
phy_interface_mode_is_8023z(interface) && !pl->sfp_bus))) |
| 2205 |
return -EINVAL; |
| 2206 |
|
| 2207 |
if (pl->phydev) |
| 2208 |
return -EBUSY; |
| 2209 |
|
| 2210 |
if (pl->config->mac_requires_rxc) |
| 2211 |
flags |= PHY_F_RXC_ALWAYS_ON; |
| 2212 |
|
| 2213 |
return phy_attach_direct(pl->netdev, phy, flags, interface); |
| 2214 |
} |
| 2215 |
|
| 2216 |
/** |
| 2217 |
* phylink_connect_phy() - connect a PHY to the phylink instance |
| 2218 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2219 |
* @phy: a pointer to a &struct phy_device. |
| 2220 |
* |
| 2221 |
* Connect @phy to the phylink instance specified by @pl by calling |
| 2222 |
* phy_attach_direct(). Configure the @phy according to the MAC driver's |
| 2223 |
* capabilities, start the PHYLIB state machine and enable any interrupts |
| 2224 |
* that the PHY supports. |
| 2225 |
* |
| 2226 |
* This updates the phylink's ethtool supported and advertising link mode |
| 2227 |
* masks. |
| 2228 |
* |
| 2229 |
* Returns 0 on success or a negative errno. |
| 2230 |
*/ |
| 2231 |
int phylink_connect_phy(struct phylink *pl, struct phy_device *phy) |
| 2232 |
{ |
| 2233 |
int ret; |
| 2234 |
|
| 2235 |
/* Use PHY device/driver interface */ |
| 2236 |
if (pl->link_interface == PHY_INTERFACE_MODE_NA) { |
| 2237 |
pl->link_interface = phy->interface; |
| 2238 |
pl->link_config.interface = pl->link_interface; |
| 2239 |
} |
| 2240 |
|
| 2241 |
ret = phylink_attach_phy(pl, phy, pl->link_interface); |
| 2242 |
if (ret < 0) |
| 2243 |
return ret; |
| 2244 |
|
| 2245 |
ret = phylink_bringup_phy(pl, phy, pl->link_config.interface); |
| 2246 |
if (ret) |
| 2247 |
phy_detach(phy); |
| 2248 |
|
| 2249 |
return ret; |
| 2250 |
} |
| 2251 |
EXPORT_SYMBOL_GPL(phylink_connect_phy); |
| 2252 |
|
| 2253 |
/** |
| 2254 |
* phylink_of_phy_connect() - connect the PHY specified in the DT mode. |
| 2255 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2256 |
* @dn: a pointer to a &struct device_node. |
| 2257 |
* @flags: PHY-specific flags to communicate to the PHY device driver |
| 2258 |
* |
| 2259 |
* Connect the phy specified in the device node @dn to the phylink instance |
| 2260 |
* specified by @pl. Actions specified in phylink_connect_phy() will be |
| 2261 |
* performed. |
| 2262 |
* |
| 2263 |
* Returns 0 on success or a negative errno. |
| 2264 |
*/ |
| 2265 |
int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn, |
| 2266 |
u32 flags) |
| 2267 |
{ |
| 2268 |
return phylink_fwnode_phy_connect(pl, of_fwnode_handle(dn), flags); |
| 2269 |
} |
| 2270 |
EXPORT_SYMBOL_GPL(phylink_of_phy_connect); |
| 2271 |
|
| 2272 |
/** |
| 2273 |
* phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode. |
| 2274 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2275 |
* @fwnode: a pointer to a &struct fwnode_handle. |
| 2276 |
* @flags: PHY-specific flags to communicate to the PHY device driver |
| 2277 |
* |
| 2278 |
* Connect the phy specified @fwnode to the phylink instance specified |
| 2279 |
* by @pl. |
| 2280 |
* |
| 2281 |
* Returns 0 on success or a negative errno. |
| 2282 |
*/ |
| 2283 |
int phylink_fwnode_phy_connect(struct phylink *pl, |
| 2284 |
const struct fwnode_handle *fwnode, |
| 2285 |
u32 flags) |
| 2286 |
{ |
| 2287 |
struct fwnode_handle *phy_fwnode; |
| 2288 |
struct phy_device *phy_dev; |
| 2289 |
int ret; |
| 2290 |
|
| 2291 |
/* Fixed links and 802.3z are handled without needing a PHY */ |
| 2292 |
if (pl->cfg_link_an_mode == MLO_AN_FIXED || |
| 2293 |
(pl->cfg_link_an_mode == MLO_AN_INBAND && |
| 2294 |
phy_interface_mode_is_8023z(pl->link_interface))) |
| 2295 |
return 0; |
| 2296 |
|
| 2297 |
phy_fwnode = fwnode_get_phy_node(fwnode); |
| 2298 |
if (IS_ERR(phy_fwnode)) { |
| 2299 |
if (pl->cfg_link_an_mode == MLO_AN_PHY) |
| 2300 |
return -ENODEV; |
| 2301 |
return 0; |
| 2302 |
} |
| 2303 |
|
| 2304 |
phy_dev = fwnode_phy_find_device(phy_fwnode); |
| 2305 |
/* We're done with the phy_node handle */ |
| 2306 |
fwnode_handle_put(phy_fwnode); |
| 2307 |
if (!phy_dev) |
| 2308 |
return -ENODEV; |
| 2309 |
|
| 2310 |
/* Use PHY device/driver interface */ |
| 2311 |
if (pl->link_interface == PHY_INTERFACE_MODE_NA) { |
| 2312 |
pl->link_interface = phy_dev->interface; |
| 2313 |
pl->link_config.interface = pl->link_interface; |
| 2314 |
} |
| 2315 |
|
| 2316 |
if (pl->config->mac_requires_rxc) |
| 2317 |
flags |= PHY_F_RXC_ALWAYS_ON; |
| 2318 |
|
| 2319 |
ret = phy_attach_direct(pl->netdev, phy_dev, flags, |
| 2320 |
pl->link_interface); |
| 2321 |
phy_device_free(phy_dev); |
| 2322 |
if (ret) |
| 2323 |
return ret; |
| 2324 |
|
| 2325 |
ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface); |
| 2326 |
if (ret) |
| 2327 |
phy_detach(phy_dev); |
| 2328 |
|
| 2329 |
return ret; |
| 2330 |
} |
| 2331 |
EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect); |
| 2332 |
|
| 2333 |
/** |
| 2334 |
* phylink_disconnect_phy() - disconnect any PHY attached to the phylink |
| 2335 |
* instance. |
| 2336 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2337 |
* |
| 2338 |
* Disconnect any current PHY from the phylink instance described by @pl. |
| 2339 |
*/ |
| 2340 |
void phylink_disconnect_phy(struct phylink *pl) |
| 2341 |
{ |
| 2342 |
struct phy_device *phy; |
| 2343 |
|
| 2344 |
ASSERT_RTNL(); |
| 2345 |
|
| 2346 |
mutex_lock(&pl->phydev_mutex); |
| 2347 |
phy = pl->phydev; |
| 2348 |
if (phy) { |
| 2349 |
mutex_lock(&phy->lock); |
| 2350 |
mutex_lock(&pl->state_mutex); |
| 2351 |
pl->phydev = NULL; |
| 2352 |
pl->phy_enable_tx_lpi = false; |
| 2353 |
pl->mac_tx_clk_stop = false; |
| 2354 |
mutex_unlock(&pl->state_mutex); |
| 2355 |
mutex_unlock(&phy->lock); |
| 2356 |
} |
| 2357 |
mutex_unlock(&pl->phydev_mutex); |
| 2358 |
|
| 2359 |
if (phy) { |
| 2360 |
flush_work(&pl->resolve); |
| 2361 |
phy_disconnect(phy); |
| 2362 |
} |
| 2363 |
} |
| 2364 |
EXPORT_SYMBOL_GPL(phylink_disconnect_phy); |
| 2365 |
|
| 2366 |
static void phylink_link_changed(struct phylink *pl, bool up, const char *what) |
| 2367 |
{ |
| 2368 |
if (!up) |
| 2369 |
pl->link_failed = true; |
| 2370 |
phylink_run_resolve(pl); |
| 2371 |
phylink_dbg(pl, "%s link %s\n", what, up ? "up" : "down"); |
| 2372 |
} |
| 2373 |
|
| 2374 |
/** |
| 2375 |
* phylink_mac_change() - notify phylink of a change in MAC state |
| 2376 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2377 |
* @up: indicates whether the link is currently up. |
| 2378 |
* |
| 2379 |
* The MAC driver should call this driver when the state of its link |
| 2380 |
* changes (eg, link failure, new negotiation results, etc.) |
| 2381 |
*/ |
| 2382 |
void phylink_mac_change(struct phylink *pl, bool up) |
| 2383 |
{ |
| 2384 |
phylink_link_changed(pl, up, "mac"); |
| 2385 |
} |
| 2386 |
EXPORT_SYMBOL_GPL(phylink_mac_change); |
| 2387 |
|
| 2388 |
/** |
| 2389 |
* phylink_pcs_change() - notify phylink of a change to PCS link state |
| 2390 |
* @pcs: pointer to &struct phylink_pcs |
| 2391 |
* @up: indicates whether the link is currently up. |
| 2392 |
* |
| 2393 |
* The PCS driver should call this when the state of its link changes |
| 2394 |
* (e.g. link failure, new negotiation results, etc.) Note: it should |
| 2395 |
* not determine "up" by reading the BMSR. If in doubt about the link |
| 2396 |
* state at interrupt time, then pass true if pcs_get_state() returns |
| 2397 |
* the latched link-down state, otherwise pass false. |
| 2398 |
*/ |
| 2399 |
void phylink_pcs_change(struct phylink_pcs *pcs, bool up) |
| 2400 |
{ |
| 2401 |
struct phylink *pl = pcs->phylink; |
| 2402 |
|
| 2403 |
if (pl) |
| 2404 |
phylink_link_changed(pl, up, "pcs"); |
| 2405 |
} |
| 2406 |
EXPORT_SYMBOL_GPL(phylink_pcs_change); |
| 2407 |
|
| 2408 |
static irqreturn_t phylink_link_handler(int irq, void *data) |
| 2409 |
{ |
| 2410 |
struct phylink *pl = data; |
| 2411 |
|
| 2412 |
phylink_run_resolve(pl); |
| 2413 |
|
| 2414 |
return IRQ_HANDLED; |
| 2415 |
} |
| 2416 |
|
| 2417 |
/** |
| 2418 |
* phylink_start() - start a phylink instance |
| 2419 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2420 |
* |
| 2421 |
* Start the phylink instance specified by @pl, configuring the MAC for the |
| 2422 |
* desired link mode(s) and negotiation style. This should be called from the |
| 2423 |
* network device driver's &struct net_device_ops ndo_open() method. |
| 2424 |
*/ |
| 2425 |
void phylink_start(struct phylink *pl) |
| 2426 |
{ |
| 2427 |
bool poll = false; |
| 2428 |
|
| 2429 |
ASSERT_RTNL(); |
| 2430 |
|
| 2431 |
phylink_info(pl, "configuring for %s/%s link mode\n", |
| 2432 |
phylink_an_mode_str(pl->req_link_an_mode), |
| 2433 |
phy_modes(pl->link_config.interface)); |
| 2434 |
|
| 2435 |
/* Always set the carrier off */ |
| 2436 |
if (pl->netdev) |
| 2437 |
netif_carrier_off(pl->netdev); |
| 2438 |
|
| 2439 |
pl->pcs_state = PCS_STATE_STARTING; |
| 2440 |
|
| 2441 |
/* Apply the link configuration to the MAC when starting. This allows |
| 2442 |
* a fixed-link to start with the correct parameters, and also |
| 2443 |
* ensures that we set the appropriate advertisement for Serdes links. |
| 2444 |
* |
| 2445 |
* Restart autonegotiation if using 802.3z to ensure that the link |
| 2446 |
* parameters are properly negotiated. This is necessary for DSA |
| 2447 |
* switches using 802.3z negotiation to ensure they see our modes. |
| 2448 |
*/ |
| 2449 |
phylink_mac_initial_config(pl, true); |
| 2450 |
|
| 2451 |
pl->pcs_state = PCS_STATE_STARTED; |
| 2452 |
|
| 2453 |
phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_STOPPED); |
| 2454 |
|
| 2455 |
if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) { |
| 2456 |
int irq = gpiod_to_irq(pl->link_gpio); |
| 2457 |
|
| 2458 |
if (irq > 0) { |
| 2459 |
if (!request_irq(irq, phylink_link_handler, |
| 2460 |
IRQF_TRIGGER_RISING | |
| 2461 |
IRQF_TRIGGER_FALLING, |
| 2462 |
"netdev link", pl)) |
| 2463 |
pl->link_irq = irq; |
| 2464 |
else |
| 2465 |
irq = 0; |
| 2466 |
} |
| 2467 |
if (irq <= 0) |
| 2468 |
poll = true; |
| 2469 |
} |
| 2470 |
|
| 2471 |
if (pl->cfg_link_an_mode == MLO_AN_FIXED) |
| 2472 |
poll |= pl->config->poll_fixed_state; |
| 2473 |
|
| 2474 |
if (poll) |
| 2475 |
mod_timer(&pl->link_poll, jiffies + HZ); |
| 2476 |
if (pl->phydev) |
| 2477 |
phy_start(pl->phydev); |
| 2478 |
if (pl->sfp_bus) |
| 2479 |
sfp_upstream_start(pl->sfp_bus); |
| 2480 |
} |
| 2481 |
EXPORT_SYMBOL_GPL(phylink_start); |
| 2482 |
|
| 2483 |
/** |
| 2484 |
* phylink_stop() - stop a phylink instance |
| 2485 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2486 |
* |
| 2487 |
* Stop the phylink instance specified by @pl. This should be called from the |
| 2488 |
* network device driver's &struct net_device_ops ndo_stop() method. The |
| 2489 |
* network device's carrier state should not be changed prior to calling this |
| 2490 |
* function. |
| 2491 |
* |
| 2492 |
* This will synchronously bring down the link if the link is not already |
| 2493 |
* down (in other words, it will trigger a mac_link_down() method call.) |
| 2494 |
*/ |
| 2495 |
void phylink_stop(struct phylink *pl) |
| 2496 |
{ |
| 2497 |
ASSERT_RTNL(); |
| 2498 |
|
| 2499 |
if (pl->sfp_bus) |
| 2500 |
sfp_upstream_stop(pl->sfp_bus); |
| 2501 |
if (pl->phydev) |
| 2502 |
phy_stop(pl->phydev); |
| 2503 |
timer_delete_sync(&pl->link_poll); |
| 2504 |
if (pl->link_irq) { |
| 2505 |
free_irq(pl->link_irq, pl); |
| 2506 |
pl->link_irq = 0; |
| 2507 |
} |
| 2508 |
|
| 2509 |
phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED); |
| 2510 |
|
| 2511 |
pl->pcs_state = PCS_STATE_DOWN; |
| 2512 |
|
| 2513 |
phylink_pcs_disable(pl->pcs); |
| 2514 |
} |
| 2515 |
EXPORT_SYMBOL_GPL(phylink_stop); |
| 2516 |
|
| 2517 |
/** |
| 2518 |
* phylink_rx_clk_stop_block() - block PHY ability to stop receive clock in LPI |
| 2519 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2520 |
* |
| 2521 |
* Disable the PHY's ability to stop the receive clock while the receive path |
| 2522 |
* is in EEE LPI state, until the number of calls to phylink_rx_clk_stop_block() |
| 2523 |
* are balanced by calls to phylink_rx_clk_stop_unblock(). |
| 2524 |
*/ |
| 2525 |
void phylink_rx_clk_stop_block(struct phylink *pl) |
| 2526 |
{ |
| 2527 |
ASSERT_RTNL(); |
| 2528 |
|
| 2529 |
if (pl->mac_rx_clk_stop_blocked == U8_MAX) { |
| 2530 |
phylink_warn(pl, "%s called too many times - ignoring\n", |
| 2531 |
__func__); |
| 2532 |
dump_stack(); |
| 2533 |
return; |
| 2534 |
} |
| 2535 |
|
| 2536 |
/* Disable PHY receive clock stop if this is the first time this |
| 2537 |
* function has been called and clock-stop was previously enabled. |
| 2538 |
*/ |
| 2539 |
if (pl->mac_rx_clk_stop_blocked++ == 0 && |
| 2540 |
pl->mac_supports_eee_ops && pl->phydev && |
| 2541 |
pl->config->eee_rx_clk_stop_enable) |
| 2542 |
phy_eee_rx_clock_stop(pl->phydev, false); |
| 2543 |
} |
| 2544 |
EXPORT_SYMBOL_GPL(phylink_rx_clk_stop_block); |
| 2545 |
|
| 2546 |
/** |
| 2547 |
* phylink_rx_clk_stop_unblock() - unblock PHY ability to stop receive clock |
| 2548 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2549 |
* |
| 2550 |
* All calls to phylink_rx_clk_stop_block() must be balanced with a |
| 2551 |
* corresponding call to phylink_rx_clk_stop_unblock() to restore the PHYs |
| 2552 |
* ability to stop the receive clock when the receive path is in EEE LPI mode. |
| 2553 |
*/ |
| 2554 |
void phylink_rx_clk_stop_unblock(struct phylink *pl) |
| 2555 |
{ |
| 2556 |
ASSERT_RTNL(); |
| 2557 |
|
| 2558 |
if (pl->mac_rx_clk_stop_blocked == 0) { |
| 2559 |
phylink_warn(pl, "%s called too many times - ignoring\n", |
| 2560 |
__func__); |
| 2561 |
dump_stack(); |
| 2562 |
return; |
| 2563 |
} |
| 2564 |
|
| 2565 |
/* Re-enable PHY receive clock stop if the number of unblocks matches |
| 2566 |
* the number of calls to the block function above. |
| 2567 |
*/ |
| 2568 |
if (--pl->mac_rx_clk_stop_blocked == 0 && |
| 2569 |
pl->mac_supports_eee_ops && pl->phydev && |
| 2570 |
pl->config->eee_rx_clk_stop_enable) |
| 2571 |
phy_eee_rx_clock_stop(pl->phydev, true); |
| 2572 |
} |
| 2573 |
EXPORT_SYMBOL_GPL(phylink_rx_clk_stop_unblock); |
| 2574 |
|
| 2575 |
static bool phylink_mac_supports_wol(struct phylink *pl) |
| 2576 |
{ |
| 2577 |
return !!pl->mac_ops->mac_wol_set; |
| 2578 |
} |
| 2579 |
|
| 2580 |
static bool phylink_phy_supports_wol(struct phylink *pl, |
| 2581 |
struct phy_device *phydev) |
| 2582 |
{ |
| 2583 |
return phydev && (pl->config->wol_phy_legacy || phy_can_wakeup(phydev)); |
| 2584 |
} |
| 2585 |
|
| 2586 |
static bool phylink_phy_pm_speed_ctrl(struct phylink *pl) |
| 2587 |
{ |
| 2588 |
return pl->config->wol_phy_speed_ctrl && !pl->wolopts_mac && |
| 2589 |
pl->phydev && phy_may_wakeup(pl->phydev); |
| 2590 |
} |
| 2591 |
|
| 2592 |
/** |
| 2593 |
* phylink_suspend() - handle a network device suspend event |
| 2594 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2595 |
* @mac_wol: true if the MAC needs to receive packets for Wake-on-Lan |
| 2596 |
* |
| 2597 |
* Handle a network device suspend event. There are several cases: |
| 2598 |
* |
| 2599 |
* - If Wake-on-Lan is not active, we can bring down the link between |
| 2600 |
* the MAC and PHY by calling phylink_stop(). |
| 2601 |
* - If Wake-on-Lan is active, and being handled only by the PHY, we |
| 2602 |
* can also bring down the link between the MAC and PHY. |
| 2603 |
* - If Wake-on-Lan is active, but being handled by the MAC, the MAC |
| 2604 |
* still needs to receive packets, so we can not bring the link down. |
| 2605 |
* |
| 2606 |
* Note: when phylink managed Wake-on-Lan is in use, @mac_wol is ignored. |
| 2607 |
* (struct phylink_mac_ops.mac_set_wol populated.) |
| 2608 |
*/ |
| 2609 |
void phylink_suspend(struct phylink *pl, bool mac_wol) |
| 2610 |
{ |
| 2611 |
ASSERT_RTNL(); |
| 2612 |
|
| 2613 |
if (phylink_mac_supports_wol(pl)) |
| 2614 |
mac_wol = !!pl->wolopts_mac; |
| 2615 |
|
| 2616 |
if (mac_wol && (!pl->netdev || pl->netdev->ethtool->wol_enabled)) { |
| 2617 |
/* Wake-on-Lan enabled, MAC handling */ |
| 2618 |
mutex_lock(&pl->state_mutex); |
| 2619 |
|
| 2620 |
/* Stop the resolver bringing the link up */ |
| 2621 |
__set_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state); |
| 2622 |
|
| 2623 |
pl->suspend_link_up = phylink_link_is_up(pl); |
| 2624 |
if (pl->suspend_link_up) { |
| 2625 |
/* Disable the carrier, to prevent transmit timeouts, |
| 2626 |
* but one would hope all packets have been sent. This |
| 2627 |
* also means phylink_resolve() will do nothing. |
| 2628 |
*/ |
| 2629 |
if (pl->netdev) |
| 2630 |
netif_carrier_off(pl->netdev); |
| 2631 |
pl->old_link_state = false; |
| 2632 |
} |
| 2633 |
|
| 2634 |
/* We do not call mac_link_down() here as we want the |
| 2635 |
* link to remain up to receive the WoL packets. |
| 2636 |
*/ |
| 2637 |
mutex_unlock(&pl->state_mutex); |
| 2638 |
} else { |
| 2639 |
phylink_stop(pl); |
| 2640 |
} |
| 2641 |
|
| 2642 |
if (phylink_phy_pm_speed_ctrl(pl)) |
| 2643 |
phylink_speed_down(pl, false); |
| 2644 |
} |
| 2645 |
EXPORT_SYMBOL_GPL(phylink_suspend); |
| 2646 |
|
| 2647 |
/** |
| 2648 |
* phylink_prepare_resume() - prepare to resume a network device |
| 2649 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2650 |
* |
| 2651 |
* Optional, but if called must be called prior to phylink_resume(). |
| 2652 |
* |
| 2653 |
* Prepare to resume a network device, preparing the PHY as necessary. |
| 2654 |
*/ |
| 2655 |
void phylink_prepare_resume(struct phylink *pl) |
| 2656 |
{ |
| 2657 |
struct phy_device *phydev = pl->phydev; |
| 2658 |
|
| 2659 |
ASSERT_RTNL(); |
| 2660 |
|
| 2661 |
/* IEEE 802.3 22.2.4.1.5 allows PHYs to stop their receive clock |
| 2662 |
* when PDOWN is set. However, some MACs require RXC to be running |
| 2663 |
* in order to resume. If the MAC requires RXC, and we have a PHY, |
| 2664 |
* then resume the PHY. Note that 802.3 allows PHYs 500ms before |
| 2665 |
* the clock meets requirements. We do not implement this delay. |
| 2666 |
*/ |
| 2667 |
if (pl->config->mac_requires_rxc && phydev && phydev->suspended) |
| 2668 |
phy_resume(phydev); |
| 2669 |
} |
| 2670 |
EXPORT_SYMBOL_GPL(phylink_prepare_resume); |
| 2671 |
|
| 2672 |
/** |
| 2673 |
* phylink_resume() - handle a network device resume event |
| 2674 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2675 |
* |
| 2676 |
* Undo the effects of phylink_suspend(), returning the link to an |
| 2677 |
* operational state. |
| 2678 |
*/ |
| 2679 |
void phylink_resume(struct phylink *pl) |
| 2680 |
{ |
| 2681 |
ASSERT_RTNL(); |
| 2682 |
|
| 2683 |
if (phylink_phy_pm_speed_ctrl(pl)) |
| 2684 |
phylink_speed_up(pl); |
| 2685 |
|
| 2686 |
if (test_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state)) { |
| 2687 |
/* Wake-on-Lan enabled, MAC handling */ |
| 2688 |
|
| 2689 |
if (pl->suspend_link_up) { |
| 2690 |
/* Call mac_link_down() so we keep the overall state |
| 2691 |
* balanced. Do this under the state_mutex lock for |
| 2692 |
* consistency. This will cause a "Link Down" message |
| 2693 |
* to be printed during resume, which is harmless - |
| 2694 |
* the true link state will be printed when we run a |
| 2695 |
* resolve. |
| 2696 |
*/ |
| 2697 |
mutex_lock(&pl->state_mutex); |
| 2698 |
phylink_link_down(pl); |
| 2699 |
mutex_unlock(&pl->state_mutex); |
| 2700 |
} |
| 2701 |
|
| 2702 |
/* Re-apply the link parameters so that all the settings get |
| 2703 |
* restored to the MAC. |
| 2704 |
*/ |
| 2705 |
phylink_mac_initial_config(pl, true); |
| 2706 |
|
| 2707 |
/* Re-enable and re-resolve the link parameters */ |
| 2708 |
phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_MAC_WOL); |
| 2709 |
} else { |
| 2710 |
phylink_start(pl); |
| 2711 |
} |
| 2712 |
} |
| 2713 |
EXPORT_SYMBOL_GPL(phylink_resume); |
| 2714 |
|
| 2715 |
/** |
| 2716 |
* phylink_ethtool_get_wol() - get the wake on lan parameters for the PHY |
| 2717 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2718 |
* @wol: a pointer to &struct ethtool_wolinfo to hold the read parameters |
| 2719 |
* |
| 2720 |
* Read the wake on lan parameters from the PHY attached to the phylink |
| 2721 |
* instance specified by @pl. If no PHY is currently attached, report no |
| 2722 |
* support for wake on lan. |
| 2723 |
*/ |
| 2724 |
void phylink_ethtool_get_wol(struct phylink *pl, struct ethtool_wolinfo *wol) |
| 2725 |
{ |
| 2726 |
ASSERT_RTNL(); |
| 2727 |
|
| 2728 |
wol->supported = 0; |
| 2729 |
wol->wolopts = 0; |
| 2730 |
|
| 2731 |
if (phylink_mac_supports_wol(pl)) { |
| 2732 |
if (phylink_phy_supports_wol(pl, pl->phydev)) |
| 2733 |
phy_ethtool_get_wol(pl->phydev, wol); |
| 2734 |
|
| 2735 |
/* Where the MAC augments the WoL support, merge its support and |
| 2736 |
* current configuration. |
| 2737 |
*/ |
| 2738 |
if (~wol->wolopts & pl->wolopts_mac & WAKE_MAGICSECURE) |
| 2739 |
memcpy(wol->sopass, pl->wol_sopass, |
| 2740 |
sizeof(wol->sopass)); |
| 2741 |
|
| 2742 |
wol->supported |= pl->config->wol_mac_support; |
| 2743 |
wol->wolopts |= pl->wolopts_mac; |
| 2744 |
} else { |
| 2745 |
/* Legacy */ |
| 2746 |
if (pl->phydev) |
| 2747 |
phy_ethtool_get_wol(pl->phydev, wol); |
| 2748 |
} |
| 2749 |
} |
| 2750 |
EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol); |
| 2751 |
|
| 2752 |
/** |
| 2753 |
* phylink_ethtool_set_wol() - set wake on lan parameters |
| 2754 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2755 |
* @wol: a pointer to &struct ethtool_wolinfo for the desired parameters |
| 2756 |
* |
| 2757 |
* Set the wake on lan parameters for the PHY attached to the phylink |
| 2758 |
* instance specified by @pl. If no PHY is attached, returns %EOPNOTSUPP |
| 2759 |
* error. |
| 2760 |
* |
| 2761 |
* Returns zero on success or negative errno code. |
| 2762 |
*/ |
| 2763 |
int phylink_ethtool_set_wol(struct phylink *pl, struct ethtool_wolinfo *wol) |
| 2764 |
{ |
| 2765 |
struct ethtool_wolinfo w = { .cmd = ETHTOOL_GWOL }; |
| 2766 |
int ret = -EOPNOTSUPP; |
| 2767 |
bool changed; |
| 2768 |
u32 wolopts; |
| 2769 |
|
| 2770 |
ASSERT_RTNL(); |
| 2771 |
|
| 2772 |
if (phylink_mac_supports_wol(pl)) { |
| 2773 |
wolopts = wol->wolopts; |
| 2774 |
|
| 2775 |
if (phylink_phy_supports_wol(pl, pl->phydev)) { |
| 2776 |
ret = phy_ethtool_set_wol(pl->phydev, wol); |
| 2777 |
if (ret != 0 && ret != -EOPNOTSUPP) |
| 2778 |
return ret; |
| 2779 |
|
| 2780 |
phy_ethtool_get_wol(pl->phydev, &w); |
| 2781 |
|
| 2782 |
/* Any Wake-on-Lan modes which the PHY is handling |
| 2783 |
* should not be passed on to the MAC. |
| 2784 |
*/ |
| 2785 |
wolopts &= ~w.wolopts; |
| 2786 |
} |
| 2787 |
|
| 2788 |
wolopts &= pl->config->wol_mac_support; |
| 2789 |
changed = pl->wolopts_mac != wolopts; |
| 2790 |
if (wolopts & WAKE_MAGICSECURE) |
| 2791 |
changed |= !!memcmp(wol->sopass, pl->wol_sopass, |
| 2792 |
sizeof(wol->sopass)); |
| 2793 |
memcpy(pl->wol_sopass, wol->sopass, sizeof(pl->wol_sopass)); |
| 2794 |
|
| 2795 |
if (changed) { |
| 2796 |
ret = pl->mac_ops->mac_wol_set(pl->config, wolopts, |
| 2797 |
wol->sopass); |
| 2798 |
if (!ret) |
| 2799 |
pl->wolopts_mac = wolopts; |
| 2800 |
} else { |
| 2801 |
ret = 0; |
| 2802 |
} |
| 2803 |
} else { |
| 2804 |
if (pl->phydev) |
| 2805 |
ret = phy_ethtool_set_wol(pl->phydev, wol); |
| 2806 |
} |
| 2807 |
|
| 2808 |
return ret; |
| 2809 |
} |
| 2810 |
EXPORT_SYMBOL_GPL(phylink_ethtool_set_wol); |
| 2811 |
|
| 2812 |
static phy_interface_t phylink_sfp_select_interface(struct phylink *pl, |
| 2813 |
const unsigned long *link_modes) |
| 2814 |
{ |
| 2815 |
phy_interface_t interface; |
| 2816 |
|
| 2817 |
interface = sfp_select_interface(pl->sfp_bus, link_modes); |
| 2818 |
if (interface == PHY_INTERFACE_MODE_NA) { |
| 2819 |
phylink_err(pl, |
| 2820 |
"selection of interface failed, advertisement %*pb\n", |
| 2821 |
__ETHTOOL_LINK_MODE_MASK_NBITS, |
| 2822 |
link_modes); |
| 2823 |
return interface; |
| 2824 |
} |
| 2825 |
|
| 2826 |
if (!test_bit(interface, pl->config->supported_interfaces)) { |
| 2827 |
phylink_err(pl, |
| 2828 |
"selection of interface failed, SFP selected %s (%u) but MAC supports %*pbl\n", |
| 2829 |
phy_modes(interface), interface, |
| 2830 |
(int)PHY_INTERFACE_MODE_MAX, |
| 2831 |
pl->config->supported_interfaces); |
| 2832 |
return PHY_INTERFACE_MODE_NA; |
| 2833 |
} |
| 2834 |
|
| 2835 |
return interface; |
| 2836 |
} |
| 2837 |
|
| 2838 |
static phy_interface_t phylink_sfp_select_interface_speed(struct phylink *pl, |
| 2839 |
u32 speed) |
| 2840 |
{ |
| 2841 |
phy_interface_t best_interface = PHY_INTERFACE_MODE_NA; |
| 2842 |
phy_interface_t interface; |
| 2843 |
u32 max_speed; |
| 2844 |
int i; |
| 2845 |
|
| 2846 |
for (i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); i++) { |
| 2847 |
interface = phylink_sfp_interface_preference[i]; |
| 2848 |
if (!test_bit(interface, pl->sfp_interfaces)) |
| 2849 |
continue; |
| 2850 |
|
| 2851 |
max_speed = phylink_interface_max_speed(interface); |
| 2852 |
|
| 2853 |
/* The logic here is: if speed == max_speed, then we've found |
| 2854 |
* the best interface. Otherwise we find the interface that |
| 2855 |
* can just support the requested speed. |
| 2856 |
*/ |
| 2857 |
if (max_speed >= speed) |
| 2858 |
best_interface = interface; |
| 2859 |
|
| 2860 |
if (max_speed <= speed) |
| 2861 |
break; |
| 2862 |
} |
| 2863 |
|
| 2864 |
if (best_interface == PHY_INTERFACE_MODE_NA) |
| 2865 |
phylink_err(pl, "selection of interface failed, speed %u\n", |
| 2866 |
speed); |
| 2867 |
|
| 2868 |
return best_interface; |
| 2869 |
} |
| 2870 |
|
| 2871 |
static void phylink_merge_link_mode(unsigned long *dst, const unsigned long *b) |
| 2872 |
{ |
| 2873 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask); |
| 2874 |
|
| 2875 |
linkmode_zero(mask); |
| 2876 |
phylink_set_port_modes(mask); |
| 2877 |
|
| 2878 |
linkmode_and(dst, dst, mask); |
| 2879 |
linkmode_or(dst, dst, b); |
| 2880 |
} |
| 2881 |
|
| 2882 |
static void phylink_get_ksettings(const struct phylink_link_state *state, |
| 2883 |
struct ethtool_link_ksettings *kset) |
| 2884 |
{ |
| 2885 |
phylink_merge_link_mode(kset->link_modes.advertising, state->advertising); |
| 2886 |
linkmode_copy(kset->link_modes.lp_advertising, state->lp_advertising); |
| 2887 |
if (kset->base.rate_matching == RATE_MATCH_NONE) { |
| 2888 |
kset->base.speed = state->speed; |
| 2889 |
kset->base.duplex = state->duplex; |
| 2890 |
} |
| 2891 |
kset->base.autoneg = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 2892 |
state->advertising) ? |
| 2893 |
AUTONEG_ENABLE : AUTONEG_DISABLE; |
| 2894 |
} |
| 2895 |
|
| 2896 |
/** |
| 2897 |
* phylink_ethtool_ksettings_get() - get the current link settings |
| 2898 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2899 |
* @kset: a pointer to a &struct ethtool_link_ksettings to hold link settings |
| 2900 |
* |
| 2901 |
* Read the current link settings for the phylink instance specified by @pl. |
| 2902 |
* This will be the link settings read from the MAC, PHY or fixed link |
| 2903 |
* settings depending on the current negotiation mode. |
| 2904 |
*/ |
| 2905 |
int phylink_ethtool_ksettings_get(struct phylink *pl, |
| 2906 |
struct ethtool_link_ksettings *kset) |
| 2907 |
{ |
| 2908 |
struct phylink_link_state link_state; |
| 2909 |
|
| 2910 |
ASSERT_RTNL(); |
| 2911 |
|
| 2912 |
if (pl->phydev) |
| 2913 |
phy_ethtool_ksettings_get(pl->phydev, kset); |
| 2914 |
else |
| 2915 |
kset->base.port = pl->link_port; |
| 2916 |
|
| 2917 |
linkmode_copy(kset->link_modes.supported, pl->supported); |
| 2918 |
|
| 2919 |
switch (pl->act_link_an_mode) { |
| 2920 |
case MLO_AN_FIXED: |
| 2921 |
/* We are using fixed settings. Report these as the |
| 2922 |
* current link settings - and note that these also |
| 2923 |
* represent the supported speeds/duplex/pause modes. |
| 2924 |
*/ |
| 2925 |
phylink_get_fixed_state(pl, &link_state); |
| 2926 |
phylink_get_ksettings(&link_state, kset); |
| 2927 |
break; |
| 2928 |
|
| 2929 |
case MLO_AN_INBAND: |
| 2930 |
/* If there is a phy attached, then use the reported |
| 2931 |
* settings from the phy with no modification. |
| 2932 |
*/ |
| 2933 |
if (pl->phydev) |
| 2934 |
break; |
| 2935 |
|
| 2936 |
phylink_mac_pcs_get_state(pl, &link_state); |
| 2937 |
|
| 2938 |
/* The MAC is reporting the link results from its own PCS |
| 2939 |
* layer via in-band status. Report these as the current |
| 2940 |
* link settings. |
| 2941 |
*/ |
| 2942 |
phylink_get_ksettings(&link_state, kset); |
| 2943 |
break; |
| 2944 |
} |
| 2945 |
|
| 2946 |
return 0; |
| 2947 |
} |
| 2948 |
EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get); |
| 2949 |
|
| 2950 |
static bool phylink_validate_pcs_inband_autoneg(struct phylink *pl, |
| 2951 |
phy_interface_t interface, |
| 2952 |
unsigned long *adv) |
| 2953 |
{ |
| 2954 |
unsigned int inband = phylink_inband_caps(pl, interface); |
| 2955 |
unsigned int mask; |
| 2956 |
|
| 2957 |
/* If the PCS doesn't implement inband support, be permissive. */ |
| 2958 |
if (!inband) |
| 2959 |
return true; |
| 2960 |
|
| 2961 |
if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, adv)) |
| 2962 |
mask = LINK_INBAND_ENABLE; |
| 2963 |
else |
| 2964 |
mask = LINK_INBAND_DISABLE; |
| 2965 |
|
| 2966 |
/* Check whether the PCS implements the required mode */ |
| 2967 |
return !!(inband & mask); |
| 2968 |
} |
| 2969 |
|
| 2970 |
/** |
| 2971 |
* phylink_ethtool_ksettings_set() - set the link settings |
| 2972 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 2973 |
* @kset: a pointer to a &struct ethtool_link_ksettings for the desired modes |
| 2974 |
*/ |
| 2975 |
int phylink_ethtool_ksettings_set(struct phylink *pl, |
| 2976 |
const struct ethtool_link_ksettings *kset) |
| 2977 |
{ |
| 2978 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(support); |
| 2979 |
const struct link_capabilities *c; |
| 2980 |
struct phylink_link_state config; |
| 2981 |
|
| 2982 |
ASSERT_RTNL(); |
| 2983 |
|
| 2984 |
if (pl->phydev) { |
| 2985 |
struct ethtool_link_ksettings phy_kset = *kset; |
| 2986 |
|
| 2987 |
linkmode_and(phy_kset.link_modes.advertising, |
| 2988 |
phy_kset.link_modes.advertising, |
| 2989 |
pl->supported); |
| 2990 |
|
| 2991 |
/* We can rely on phylib for this update; we also do not need |
| 2992 |
* to update the pl->link_config settings: |
| 2993 |
* - the configuration returned via ksettings_get() will come |
| 2994 |
* from phylib whenever a PHY is present. |
| 2995 |
* - link_config.interface will be updated by the PHY calling |
| 2996 |
* back via phylink_phy_change() and a subsequent resolve. |
| 2997 |
* - initial link configuration for PHY mode comes from the |
| 2998 |
* last phy state updated via phylink_phy_change(). |
| 2999 |
* - other configuration changes (e.g. pause modes) are |
| 3000 |
* performed directly via phylib. |
| 3001 |
* - if in in-band mode with a PHY, the link configuration |
| 3002 |
* is passed on the link from the PHY, and all of |
| 3003 |
* link_config.{speed,duplex,an_enabled,pause} are not used. |
| 3004 |
* - the only possible use would be link_config.advertising |
| 3005 |
* pause modes when in 1000base-X mode with a PHY, but in |
| 3006 |
* the presence of a PHY, this should not be changed as that |
| 3007 |
* should be determined from the media side advertisement. |
| 3008 |
*/ |
| 3009 |
return phy_ethtool_ksettings_set(pl->phydev, &phy_kset); |
| 3010 |
} |
| 3011 |
|
| 3012 |
config = pl->link_config; |
| 3013 |
/* Mask out unsupported advertisements */ |
| 3014 |
linkmode_and(config.advertising, kset->link_modes.advertising, |
| 3015 |
pl->supported); |
| 3016 |
|
| 3017 |
/* FIXME: should we reject autoneg if phy/mac does not support it? */ |
| 3018 |
switch (kset->base.autoneg) { |
| 3019 |
case AUTONEG_DISABLE: |
| 3020 |
/* Autonegotiation disabled, select a suitable speed and |
| 3021 |
* duplex. |
| 3022 |
*/ |
| 3023 |
c = phy_caps_lookup(kset->base.speed, kset->base.duplex, |
| 3024 |
pl->supported, false); |
| 3025 |
if (!c) |
| 3026 |
return -EINVAL; |
| 3027 |
|
| 3028 |
/* If we have a fixed link, refuse to change link parameters. |
| 3029 |
* If the link parameters match, accept them but do nothing. |
| 3030 |
*/ |
| 3031 |
if (pl->req_link_an_mode == MLO_AN_FIXED) { |
| 3032 |
if (c->speed != pl->link_config.speed || |
| 3033 |
c->duplex != pl->link_config.duplex) |
| 3034 |
return -EINVAL; |
| 3035 |
return 0; |
| 3036 |
} |
| 3037 |
|
| 3038 |
config.speed = c->speed; |
| 3039 |
config.duplex = c->duplex; |
| 3040 |
break; |
| 3041 |
|
| 3042 |
case AUTONEG_ENABLE: |
| 3043 |
/* If we have a fixed link, allow autonegotiation (since that |
| 3044 |
* is our default case) but do not allow the advertisement to |
| 3045 |
* be changed. If the advertisement matches, simply return. |
| 3046 |
*/ |
| 3047 |
if (pl->req_link_an_mode == MLO_AN_FIXED) { |
| 3048 |
if (!linkmode_equal(config.advertising, |
| 3049 |
pl->link_config.advertising)) |
| 3050 |
return -EINVAL; |
| 3051 |
return 0; |
| 3052 |
} |
| 3053 |
|
| 3054 |
config.speed = SPEED_UNKNOWN; |
| 3055 |
config.duplex = DUPLEX_UNKNOWN; |
| 3056 |
break; |
| 3057 |
|
| 3058 |
default: |
| 3059 |
return -EINVAL; |
| 3060 |
} |
| 3061 |
|
| 3062 |
/* We have ruled out the case with a PHY attached, and the |
| 3063 |
* fixed-link cases. All that is left are in-band links. |
| 3064 |
*/ |
| 3065 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising, |
| 3066 |
kset->base.autoneg == AUTONEG_ENABLE); |
| 3067 |
|
| 3068 |
/* If this link is with an SFP, ensure that changes to advertised modes |
| 3069 |
* also cause the associated interface to be selected such that the |
| 3070 |
* link can be configured correctly. |
| 3071 |
*/ |
| 3072 |
if (pl->sfp_bus) { |
| 3073 |
if (kset->base.autoneg == AUTONEG_ENABLE) |
| 3074 |
config.interface = |
| 3075 |
phylink_sfp_select_interface(pl, |
| 3076 |
config.advertising); |
| 3077 |
else |
| 3078 |
config.interface = |
| 3079 |
phylink_sfp_select_interface_speed(pl, |
| 3080 |
config.speed); |
| 3081 |
if (config.interface == PHY_INTERFACE_MODE_NA) |
| 3082 |
return -EINVAL; |
| 3083 |
|
| 3084 |
/* Revalidate with the selected interface */ |
| 3085 |
linkmode_copy(support, pl->supported); |
| 3086 |
if (phylink_validate(pl, support, &config)) { |
| 3087 |
phylink_err(pl, "validation of %s/%s with support %*pb failed\n", |
| 3088 |
phylink_an_mode_str(pl->req_link_an_mode), |
| 3089 |
phy_modes(config.interface), |
| 3090 |
__ETHTOOL_LINK_MODE_MASK_NBITS, support); |
| 3091 |
return -EINVAL; |
| 3092 |
} |
| 3093 |
} else { |
| 3094 |
/* Validate without changing the current supported mask. */ |
| 3095 |
linkmode_copy(support, pl->supported); |
| 3096 |
if (phylink_validate(pl, support, &config)) |
| 3097 |
return -EINVAL; |
| 3098 |
} |
| 3099 |
|
| 3100 |
/* If autonegotiation is enabled, we must have an advertisement */ |
| 3101 |
if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 3102 |
config.advertising) && |
| 3103 |
phylink_is_empty_linkmode(config.advertising)) |
| 3104 |
return -EINVAL; |
| 3105 |
|
| 3106 |
/* Validate the autonegotiation state. We don't have a PHY in this |
| 3107 |
* situation, so the PCS is the media-facing entity. |
| 3108 |
*/ |
| 3109 |
if (!phylink_validate_pcs_inband_autoneg(pl, config.interface, |
| 3110 |
config.advertising)) |
| 3111 |
return -EINVAL; |
| 3112 |
|
| 3113 |
mutex_lock(&pl->state_mutex); |
| 3114 |
pl->link_config.speed = config.speed; |
| 3115 |
pl->link_config.duplex = config.duplex; |
| 3116 |
|
| 3117 |
if (pl->link_config.interface != config.interface) { |
| 3118 |
/* The interface changed, e.g. 1000base-X <-> 2500base-X */ |
| 3119 |
/* We need to force the link down, then change the interface */ |
| 3120 |
if (pl->old_link_state) { |
| 3121 |
phylink_link_down(pl); |
| 3122 |
pl->old_link_state = false; |
| 3123 |
} |
| 3124 |
if (!test_bit(PHYLINK_DISABLE_STOPPED, |
| 3125 |
&pl->phylink_disable_state)) |
| 3126 |
phylink_major_config(pl, false, &config); |
| 3127 |
pl->link_config.interface = config.interface; |
| 3128 |
linkmode_copy(pl->link_config.advertising, config.advertising); |
| 3129 |
} else if (!linkmode_equal(pl->link_config.advertising, |
| 3130 |
config.advertising)) { |
| 3131 |
linkmode_copy(pl->link_config.advertising, config.advertising); |
| 3132 |
phylink_change_inband_advert(pl); |
| 3133 |
} |
| 3134 |
mutex_unlock(&pl->state_mutex); |
| 3135 |
|
| 3136 |
return 0; |
| 3137 |
} |
| 3138 |
EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_set); |
| 3139 |
|
| 3140 |
/** |
| 3141 |
* phylink_ethtool_nway_reset() - restart negotiation |
| 3142 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 3143 |
* |
| 3144 |
* Restart negotiation for the phylink instance specified by @pl. This will |
| 3145 |
* cause any attached phy to restart negotiation with the link partner, and |
| 3146 |
* if the MAC is in a BaseX mode, the MAC will also be requested to restart |
| 3147 |
* negotiation. |
| 3148 |
* |
| 3149 |
* Returns zero on success, or negative error code. |
| 3150 |
*/ |
| 3151 |
int phylink_ethtool_nway_reset(struct phylink *pl) |
| 3152 |
{ |
| 3153 |
int ret = 0; |
| 3154 |
|
| 3155 |
ASSERT_RTNL(); |
| 3156 |
|
| 3157 |
if (pl->phydev) |
| 3158 |
ret = phy_restart_aneg(pl->phydev); |
| 3159 |
phylink_pcs_an_restart(pl); |
| 3160 |
|
| 3161 |
return ret; |
| 3162 |
} |
| 3163 |
EXPORT_SYMBOL_GPL(phylink_ethtool_nway_reset); |
| 3164 |
|
| 3165 |
/** |
| 3166 |
* phylink_ethtool_get_pauseparam() - get the current pause parameters |
| 3167 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 3168 |
* @pause: a pointer to a &struct ethtool_pauseparam |
| 3169 |
*/ |
| 3170 |
void phylink_ethtool_get_pauseparam(struct phylink *pl, |
| 3171 |
struct ethtool_pauseparam *pause) |
| 3172 |
{ |
| 3173 |
ASSERT_RTNL(); |
| 3174 |
|
| 3175 |
pause->autoneg = !!(pl->link_config.pause & MLO_PAUSE_AN); |
| 3176 |
pause->rx_pause = !!(pl->link_config.pause & MLO_PAUSE_RX); |
| 3177 |
pause->tx_pause = !!(pl->link_config.pause & MLO_PAUSE_TX); |
| 3178 |
} |
| 3179 |
EXPORT_SYMBOL_GPL(phylink_ethtool_get_pauseparam); |
| 3180 |
|
| 3181 |
/** |
| 3182 |
* phylink_ethtool_set_pauseparam() - set the current pause parameters |
| 3183 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 3184 |
* @pause: a pointer to a &struct ethtool_pauseparam |
| 3185 |
*/ |
| 3186 |
int phylink_ethtool_set_pauseparam(struct phylink *pl, |
| 3187 |
struct ethtool_pauseparam *pause) |
| 3188 |
{ |
| 3189 |
struct phylink_link_state *config = &pl->link_config; |
| 3190 |
bool manual_changed; |
| 3191 |
int pause_state; |
| 3192 |
|
| 3193 |
ASSERT_RTNL(); |
| 3194 |
|
| 3195 |
if (pl->req_link_an_mode == MLO_AN_FIXED) |
| 3196 |
return -EOPNOTSUPP; |
| 3197 |
|
| 3198 |
if (!phylink_test(pl->supported, Pause) && |
| 3199 |
!phylink_test(pl->supported, Asym_Pause)) |
| 3200 |
return -EOPNOTSUPP; |
| 3201 |
|
| 3202 |
if (!phylink_test(pl->supported, Asym_Pause) && |
| 3203 |
pause->rx_pause != pause->tx_pause) |
| 3204 |
return -EINVAL; |
| 3205 |
|
| 3206 |
pause_state = 0; |
| 3207 |
if (pause->autoneg) |
| 3208 |
pause_state |= MLO_PAUSE_AN; |
| 3209 |
if (pause->rx_pause) |
| 3210 |
pause_state |= MLO_PAUSE_RX; |
| 3211 |
if (pause->tx_pause) |
| 3212 |
pause_state |= MLO_PAUSE_TX; |
| 3213 |
|
| 3214 |
mutex_lock(&pl->state_mutex); |
| 3215 |
/* |
| 3216 |
* See the comments for linkmode_set_pause(), wrt the deficiencies |
| 3217 |
* with the current implementation. A solution to this issue would |
| 3218 |
* be: |
| 3219 |
* ethtool Local device |
| 3220 |
* rx tx Pause AsymDir |
| 3221 |
* 0 0 0 0 |
| 3222 |
* 1 0 1 1 |
| 3223 |
* 0 1 0 1 |
| 3224 |
* 1 1 1 1 |
| 3225 |
* and then use the ethtool rx/tx enablement status to mask the |
| 3226 |
* rx/tx pause resolution. |
| 3227 |
*/ |
| 3228 |
linkmode_set_pause(config->advertising, pause->tx_pause, |
| 3229 |
pause->rx_pause); |
| 3230 |
|
| 3231 |
manual_changed = (config->pause ^ pause_state) & MLO_PAUSE_AN || |
| 3232 |
(!(pause_state & MLO_PAUSE_AN) && |
| 3233 |
(config->pause ^ pause_state) & MLO_PAUSE_TXRX_MASK); |
| 3234 |
|
| 3235 |
config->pause = pause_state; |
| 3236 |
|
| 3237 |
/* Update our in-band advertisement, triggering a renegotiation if |
| 3238 |
* the advertisement changed. |
| 3239 |
*/ |
| 3240 |
if (!pl->phydev) |
| 3241 |
phylink_change_inband_advert(pl); |
| 3242 |
|
| 3243 |
mutex_unlock(&pl->state_mutex); |
| 3244 |
|
| 3245 |
/* If we have a PHY, a change of the pause frame advertisement will |
| 3246 |
* cause phylib to renegotiate (if AN is enabled) which will in turn |
| 3247 |
* call our phylink_phy_change() and trigger a resolve. Note that |
| 3248 |
* we can't hold our state mutex while calling phy_set_asym_pause(). |
| 3249 |
*/ |
| 3250 |
if (pl->phydev) |
| 3251 |
phy_set_asym_pause(pl->phydev, pause->rx_pause, |
| 3252 |
pause->tx_pause); |
| 3253 |
|
| 3254 |
/* If the manual pause settings changed, make sure we trigger a |
| 3255 |
* resolve to update their state; we can not guarantee that the |
| 3256 |
* link will cycle. |
| 3257 |
*/ |
| 3258 |
if (manual_changed) { |
| 3259 |
pl->link_failed = true; |
| 3260 |
phylink_run_resolve(pl); |
| 3261 |
} |
| 3262 |
|
| 3263 |
return 0; |
| 3264 |
} |
| 3265 |
EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam); |
| 3266 |
|
| 3267 |
/** |
| 3268 |
* phylink_get_eee_err() - read the energy efficient ethernet error |
| 3269 |
* counter |
| 3270 |
* @pl: a pointer to a &struct phylink returned from phylink_create(). |
| 3271 |
* |
| 3272 |
* Read the Energy Efficient Ethernet error counter from the PHY associated |
| 3273 |
* with the phylink instance specified by @pl. |
| 3274 |
* |
| 3275 |
* Returns positive error counter value, or negative error code. |
| 3276 |
*/ |
| 3277 |
int phylink_get_eee_err(struct phylink *pl) |
| 3278 |
{ |
| 3279 |
int ret = 0; |
| 3280 |
|
| 3281 |
ASSERT_RTNL(); |
| 3282 |
|
| 3283 |
if (pl->phydev) |
| 3284 |
ret = phy_get_eee_err(pl->phydev); |
| 3285 |
|
| 3286 |
return ret; |
| 3287 |
} |
| 3288 |
EXPORT_SYMBOL_GPL(phylink_get_eee_err); |
| 3289 |
|
| 3290 |
/** |
| 3291 |
* phylink_ethtool_get_eee() - read the energy efficient ethernet parameters |
| 3292 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 3293 |
* @eee: a pointer to a &struct ethtool_keee for the read parameters |
| 3294 |
*/ |
| 3295 |
int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_keee *eee) |
| 3296 |
{ |
| 3297 |
int ret = -EOPNOTSUPP; |
| 3298 |
|
| 3299 |
ASSERT_RTNL(); |
| 3300 |
|
| 3301 |
if (pl->mac_supports_eee_ops && !pl->mac_supports_eee) |
| 3302 |
return ret; |
| 3303 |
|
| 3304 |
if (pl->phydev) { |
| 3305 |
ret = phy_ethtool_get_eee(pl->phydev, eee); |
| 3306 |
/* Restrict supported linkmode mask */ |
| 3307 |
if (ret == 0 && pl->mac_supports_eee_ops) |
| 3308 |
linkmode_and(eee->supported, eee->supported, |
| 3309 |
pl->supported_lpi); |
| 3310 |
} |
| 3311 |
|
| 3312 |
return ret; |
| 3313 |
} |
| 3314 |
EXPORT_SYMBOL_GPL(phylink_ethtool_get_eee); |
| 3315 |
|
| 3316 |
/** |
| 3317 |
* phylink_ethtool_set_eee() - set the energy efficient ethernet parameters |
| 3318 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 3319 |
* @eee: a pointer to a &struct ethtool_keee for the desired parameters |
| 3320 |
*/ |
| 3321 |
int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_keee *eee) |
| 3322 |
{ |
| 3323 |
bool mac_eee = pl->mac_supports_eee; |
| 3324 |
int ret = -EOPNOTSUPP; |
| 3325 |
|
| 3326 |
ASSERT_RTNL(); |
| 3327 |
|
| 3328 |
phylink_dbg(pl, "mac %s phylink EEE%s, adv %*pbl, LPI%s timer %uus\n", |
| 3329 |
mac_eee ? "supports" : "does not support", |
| 3330 |
eee->eee_enabled ? ", enabled" : "", |
| 3331 |
__ETHTOOL_LINK_MODE_MASK_NBITS, eee->advertised, |
| 3332 |
eee->tx_lpi_enabled ? " enabled" : "", eee->tx_lpi_timer); |
| 3333 |
|
| 3334 |
if (pl->mac_supports_eee_ops && !mac_eee) |
| 3335 |
return ret; |
| 3336 |
|
| 3337 |
if (pl->phydev) { |
| 3338 |
/* Restrict advertisement mask */ |
| 3339 |
if (pl->mac_supports_eee_ops) |
| 3340 |
linkmode_and(eee->advertised, eee->advertised, |
| 3341 |
pl->supported_lpi); |
| 3342 |
ret = phy_ethtool_set_eee(pl->phydev, eee); |
| 3343 |
if (ret == 0) |
| 3344 |
eee_to_eeecfg(&pl->eee_cfg, eee); |
| 3345 |
} |
| 3346 |
|
| 3347 |
return ret; |
| 3348 |
} |
| 3349 |
EXPORT_SYMBOL_GPL(phylink_ethtool_set_eee); |
| 3350 |
|
| 3351 |
/* This emulates MII registers for a fixed-mode phy operating as per the |
| 3352 |
* passed in state. "aneg" defines if we report negotiation is possible. |
| 3353 |
* |
| 3354 |
* FIXME: should deal with negotiation state too. |
| 3355 |
*/ |
| 3356 |
static int phylink_mii_emul_read(unsigned int reg, |
| 3357 |
struct phylink_link_state *state) |
| 3358 |
{ |
| 3359 |
struct fixed_phy_status fs; |
| 3360 |
unsigned long *lpa = state->lp_advertising; |
| 3361 |
int val; |
| 3362 |
|
| 3363 |
fs.link = state->link; |
| 3364 |
fs.speed = state->speed; |
| 3365 |
fs.duplex = state->duplex; |
| 3366 |
fs.pause = test_bit(ETHTOOL_LINK_MODE_Pause_BIT, lpa); |
| 3367 |
fs.asym_pause = test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, lpa); |
| 3368 |
|
| 3369 |
val = swphy_read_reg(reg, &fs); |
| 3370 |
if (reg == MII_BMSR) { |
| 3371 |
if (!state->an_complete) |
| 3372 |
val &= ~BMSR_ANEGCOMPLETE; |
| 3373 |
} |
| 3374 |
return val; |
| 3375 |
} |
| 3376 |
|
| 3377 |
static int phylink_phy_read(struct phylink *pl, unsigned int phy_id, |
| 3378 |
unsigned int reg) |
| 3379 |
{ |
| 3380 |
struct phy_device *phydev = pl->phydev; |
| 3381 |
int prtad, devad; |
| 3382 |
|
| 3383 |
if (mdio_phy_id_is_c45(phy_id)) { |
| 3384 |
prtad = mdio_phy_id_prtad(phy_id); |
| 3385 |
devad = mdio_phy_id_devad(phy_id); |
| 3386 |
return mdiobus_c45_read(pl->phydev->mdio.bus, prtad, devad, |
| 3387 |
reg); |
| 3388 |
} |
| 3389 |
|
| 3390 |
if (phydev->is_c45) { |
| 3391 |
switch (reg) { |
| 3392 |
case MII_BMCR: |
| 3393 |
case MII_BMSR: |
| 3394 |
case MII_PHYSID1: |
| 3395 |
case MII_PHYSID2: |
| 3396 |
devad = __ffs(phydev->c45_ids.mmds_present); |
| 3397 |
break; |
| 3398 |
case MII_ADVERTISE: |
| 3399 |
case MII_LPA: |
| 3400 |
if (!(phydev->c45_ids.mmds_present & MDIO_DEVS_AN)) |
| 3401 |
return -EINVAL; |
| 3402 |
devad = MDIO_MMD_AN; |
| 3403 |
if (reg == MII_ADVERTISE) |
| 3404 |
reg = MDIO_AN_ADVERTISE; |
| 3405 |
else |
| 3406 |
reg = MDIO_AN_LPA; |
| 3407 |
break; |
| 3408 |
default: |
| 3409 |
return -EINVAL; |
| 3410 |
} |
| 3411 |
prtad = phy_id; |
| 3412 |
return mdiobus_c45_read(pl->phydev->mdio.bus, prtad, devad, |
| 3413 |
reg); |
| 3414 |
} |
| 3415 |
|
| 3416 |
return mdiobus_read(pl->phydev->mdio.bus, phy_id, reg); |
| 3417 |
} |
| 3418 |
|
| 3419 |
static int phylink_phy_write(struct phylink *pl, unsigned int phy_id, |
| 3420 |
unsigned int reg, unsigned int val) |
| 3421 |
{ |
| 3422 |
struct phy_device *phydev = pl->phydev; |
| 3423 |
int prtad, devad; |
| 3424 |
|
| 3425 |
if (mdio_phy_id_is_c45(phy_id)) { |
| 3426 |
prtad = mdio_phy_id_prtad(phy_id); |
| 3427 |
devad = mdio_phy_id_devad(phy_id); |
| 3428 |
return mdiobus_c45_write(pl->phydev->mdio.bus, prtad, devad, |
| 3429 |
reg, val); |
| 3430 |
} |
| 3431 |
|
| 3432 |
if (phydev->is_c45) { |
| 3433 |
switch (reg) { |
| 3434 |
case MII_BMCR: |
| 3435 |
case MII_BMSR: |
| 3436 |
case MII_PHYSID1: |
| 3437 |
case MII_PHYSID2: |
| 3438 |
devad = __ffs(phydev->c45_ids.mmds_present); |
| 3439 |
break; |
| 3440 |
case MII_ADVERTISE: |
| 3441 |
case MII_LPA: |
| 3442 |
if (!(phydev->c45_ids.mmds_present & MDIO_DEVS_AN)) |
| 3443 |
return -EINVAL; |
| 3444 |
devad = MDIO_MMD_AN; |
| 3445 |
if (reg == MII_ADVERTISE) |
| 3446 |
reg = MDIO_AN_ADVERTISE; |
| 3447 |
else |
| 3448 |
reg = MDIO_AN_LPA; |
| 3449 |
break; |
| 3450 |
default: |
| 3451 |
return -EINVAL; |
| 3452 |
} |
| 3453 |
return mdiobus_c45_write(pl->phydev->mdio.bus, phy_id, devad, |
| 3454 |
reg, val); |
| 3455 |
} |
| 3456 |
|
| 3457 |
return mdiobus_write(phydev->mdio.bus, phy_id, reg, val); |
| 3458 |
} |
| 3459 |
|
| 3460 |
static int phylink_mii_read(struct phylink *pl, unsigned int phy_id, |
| 3461 |
unsigned int reg) |
| 3462 |
{ |
| 3463 |
struct phylink_link_state state; |
| 3464 |
int val = 0xffff; |
| 3465 |
|
| 3466 |
switch (pl->act_link_an_mode) { |
| 3467 |
case MLO_AN_FIXED: |
| 3468 |
if (phy_id == 0) { |
| 3469 |
phylink_get_fixed_state(pl, &state); |
| 3470 |
val = phylink_mii_emul_read(reg, &state); |
| 3471 |
} |
| 3472 |
break; |
| 3473 |
|
| 3474 |
case MLO_AN_PHY: |
| 3475 |
return -EOPNOTSUPP; |
| 3476 |
|
| 3477 |
case MLO_AN_INBAND: |
| 3478 |
if (phy_id == 0) { |
| 3479 |
phylink_mac_pcs_get_state(pl, &state); |
| 3480 |
val = phylink_mii_emul_read(reg, &state); |
| 3481 |
} |
| 3482 |
break; |
| 3483 |
} |
| 3484 |
|
| 3485 |
return val & 0xffff; |
| 3486 |
} |
| 3487 |
|
| 3488 |
static int phylink_mii_write(struct phylink *pl, unsigned int phy_id, |
| 3489 |
unsigned int reg, unsigned int val) |
| 3490 |
{ |
| 3491 |
switch (pl->act_link_an_mode) { |
| 3492 |
case MLO_AN_FIXED: |
| 3493 |
break; |
| 3494 |
|
| 3495 |
case MLO_AN_PHY: |
| 3496 |
return -EOPNOTSUPP; |
| 3497 |
|
| 3498 |
case MLO_AN_INBAND: |
| 3499 |
break; |
| 3500 |
} |
| 3501 |
|
| 3502 |
return 0; |
| 3503 |
} |
| 3504 |
|
| 3505 |
/** |
| 3506 |
* phylink_mii_ioctl() - generic mii ioctl interface |
| 3507 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 3508 |
* @ifr: a pointer to a &struct ifreq for socket ioctls |
| 3509 |
* @cmd: ioctl cmd to execute |
| 3510 |
* |
| 3511 |
* Perform the specified MII ioctl on the PHY attached to the phylink instance |
| 3512 |
* specified by @pl. If no PHY is attached, emulate the presence of the PHY. |
| 3513 |
* |
| 3514 |
* Returns: zero on success or negative error code. |
| 3515 |
* |
| 3516 |
* %SIOCGMIIPHY: |
| 3517 |
* read register from the current PHY. |
| 3518 |
* %SIOCGMIIREG: |
| 3519 |
* read register from the specified PHY. |
| 3520 |
* %SIOCSMIIREG: |
| 3521 |
* set a register on the specified PHY. |
| 3522 |
*/ |
| 3523 |
int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd) |
| 3524 |
{ |
| 3525 |
struct mii_ioctl_data *mii = if_mii(ifr); |
| 3526 |
int ret; |
| 3527 |
|
| 3528 |
ASSERT_RTNL(); |
| 3529 |
|
| 3530 |
if (pl->phydev) { |
| 3531 |
/* PHYs only exist for MLO_AN_PHY and SGMII */ |
| 3532 |
switch (cmd) { |
| 3533 |
case SIOCGMIIPHY: |
| 3534 |
mii->phy_id = pl->phydev->mdio.addr; |
| 3535 |
fallthrough; |
| 3536 |
|
| 3537 |
case SIOCGMIIREG: |
| 3538 |
ret = phylink_phy_read(pl, mii->phy_id, mii->reg_num); |
| 3539 |
if (ret >= 0) { |
| 3540 |
mii->val_out = ret; |
| 3541 |
ret = 0; |
| 3542 |
} |
| 3543 |
break; |
| 3544 |
|
| 3545 |
case SIOCSMIIREG: |
| 3546 |
ret = phylink_phy_write(pl, mii->phy_id, mii->reg_num, |
| 3547 |
mii->val_in); |
| 3548 |
break; |
| 3549 |
|
| 3550 |
default: |
| 3551 |
ret = phy_mii_ioctl(pl->phydev, ifr, cmd); |
| 3552 |
break; |
| 3553 |
} |
| 3554 |
} else { |
| 3555 |
switch (cmd) { |
| 3556 |
case SIOCGMIIPHY: |
| 3557 |
mii->phy_id = 0; |
| 3558 |
fallthrough; |
| 3559 |
|
| 3560 |
case SIOCGMIIREG: |
| 3561 |
ret = phylink_mii_read(pl, mii->phy_id, mii->reg_num); |
| 3562 |
if (ret >= 0) { |
| 3563 |
mii->val_out = ret; |
| 3564 |
ret = 0; |
| 3565 |
} |
| 3566 |
break; |
| 3567 |
|
| 3568 |
case SIOCSMIIREG: |
| 3569 |
ret = phylink_mii_write(pl, mii->phy_id, mii->reg_num, |
| 3570 |
mii->val_in); |
| 3571 |
break; |
| 3572 |
|
| 3573 |
default: |
| 3574 |
ret = -EOPNOTSUPP; |
| 3575 |
break; |
| 3576 |
} |
| 3577 |
} |
| 3578 |
|
| 3579 |
return ret; |
| 3580 |
} |
| 3581 |
EXPORT_SYMBOL_GPL(phylink_mii_ioctl); |
| 3582 |
|
| 3583 |
/** |
| 3584 |
* phylink_speed_down() - set the non-SFP PHY to lowest speed supported by both |
| 3585 |
* link partners |
| 3586 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 3587 |
* @sync: perform action synchronously |
| 3588 |
* |
| 3589 |
* If we have a PHY that is not part of a SFP module, then set the speed |
| 3590 |
* as described in the phy_speed_down() function. Please see this function |
| 3591 |
* for a description of the @sync parameter. |
| 3592 |
* |
| 3593 |
* Returns zero if there is no PHY, otherwise as per phy_speed_down(). |
| 3594 |
*/ |
| 3595 |
int phylink_speed_down(struct phylink *pl, bool sync) |
| 3596 |
{ |
| 3597 |
int ret = 0; |
| 3598 |
|
| 3599 |
ASSERT_RTNL(); |
| 3600 |
|
| 3601 |
if (!pl->sfp_bus && pl->phydev) |
| 3602 |
ret = phy_speed_down(pl->phydev, sync); |
| 3603 |
|
| 3604 |
return ret; |
| 3605 |
} |
| 3606 |
EXPORT_SYMBOL_GPL(phylink_speed_down); |
| 3607 |
|
| 3608 |
/** |
| 3609 |
* phylink_speed_up() - restore the advertised speeds prior to the call to |
| 3610 |
* phylink_speed_down() |
| 3611 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 3612 |
* |
| 3613 |
* If we have a PHY that is not part of a SFP module, then restore the |
| 3614 |
* PHY speeds as per phy_speed_up(). |
| 3615 |
* |
| 3616 |
* Returns zero if there is no PHY, otherwise as per phy_speed_up(). |
| 3617 |
*/ |
| 3618 |
int phylink_speed_up(struct phylink *pl) |
| 3619 |
{ |
| 3620 |
int ret = 0; |
| 3621 |
|
| 3622 |
ASSERT_RTNL(); |
| 3623 |
|
| 3624 |
if (!pl->sfp_bus && pl->phydev) |
| 3625 |
ret = phy_speed_up(pl->phydev); |
| 3626 |
|
| 3627 |
return ret; |
| 3628 |
} |
| 3629 |
EXPORT_SYMBOL_GPL(phylink_speed_up); |
| 3630 |
|
| 3631 |
static void phylink_sfp_attach(void *upstream, struct sfp_bus *bus) |
| 3632 |
{ |
| 3633 |
struct phylink *pl = upstream; |
| 3634 |
|
| 3635 |
pl->netdev->sfp_bus = bus; |
| 3636 |
} |
| 3637 |
|
| 3638 |
static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus) |
| 3639 |
{ |
| 3640 |
struct phylink *pl = upstream; |
| 3641 |
|
| 3642 |
pl->netdev->sfp_bus = NULL; |
| 3643 |
} |
| 3644 |
|
| 3645 |
static phy_interface_t phylink_choose_sfp_interface(struct phylink *pl, |
| 3646 |
const unsigned long *intf) |
| 3647 |
{ |
| 3648 |
phy_interface_t interface; |
| 3649 |
size_t i; |
| 3650 |
|
| 3651 |
interface = PHY_INTERFACE_MODE_NA; |
| 3652 |
for (i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); i++) |
| 3653 |
if (test_bit(phylink_sfp_interface_preference[i], intf)) { |
| 3654 |
interface = phylink_sfp_interface_preference[i]; |
| 3655 |
break; |
| 3656 |
} |
| 3657 |
|
| 3658 |
return interface; |
| 3659 |
} |
| 3660 |
|
| 3661 |
static void phylink_sfp_set_config(struct phylink *pl, unsigned long *supported, |
| 3662 |
struct phylink_link_state *state, |
| 3663 |
bool changed) |
| 3664 |
{ |
| 3665 |
u8 mode = MLO_AN_INBAND; |
| 3666 |
|
| 3667 |
phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n", |
| 3668 |
phylink_an_mode_str(mode), phy_modes(state->interface), |
| 3669 |
__ETHTOOL_LINK_MODE_MASK_NBITS, supported); |
| 3670 |
|
| 3671 |
if (!linkmode_equal(pl->supported, supported)) { |
| 3672 |
linkmode_copy(pl->supported, supported); |
| 3673 |
changed = true; |
| 3674 |
} |
| 3675 |
|
| 3676 |
if (!linkmode_equal(pl->link_config.advertising, state->advertising)) { |
| 3677 |
linkmode_copy(pl->link_config.advertising, state->advertising); |
| 3678 |
changed = true; |
| 3679 |
} |
| 3680 |
|
| 3681 |
if (pl->req_link_an_mode != mode || |
| 3682 |
pl->link_config.interface != state->interface) { |
| 3683 |
pl->req_link_an_mode = mode; |
| 3684 |
pl->link_config.interface = state->interface; |
| 3685 |
|
| 3686 |
changed = true; |
| 3687 |
|
| 3688 |
phylink_info(pl, "switched to %s/%s link mode\n", |
| 3689 |
phylink_an_mode_str(mode), |
| 3690 |
phy_modes(state->interface)); |
| 3691 |
} |
| 3692 |
|
| 3693 |
if (changed && !test_bit(PHYLINK_DISABLE_STOPPED, |
| 3694 |
&pl->phylink_disable_state)) |
| 3695 |
phylink_mac_initial_config(pl, false); |
| 3696 |
} |
| 3697 |
|
| 3698 |
static int phylink_sfp_config_phy(struct phylink *pl, struct phy_device *phy) |
| 3699 |
{ |
| 3700 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(support); |
| 3701 |
struct phylink_link_state config; |
| 3702 |
int ret; |
| 3703 |
|
| 3704 |
/* We're not using pl->sfp_interfaces, so clear it. */ |
| 3705 |
phy_interface_zero(pl->sfp_interfaces); |
| 3706 |
linkmode_copy(support, phy->supported); |
| 3707 |
|
| 3708 |
memset(&config, 0, sizeof(config)); |
| 3709 |
linkmode_copy(config.advertising, phy->advertising); |
| 3710 |
config.interface = PHY_INTERFACE_MODE_NA; |
| 3711 |
config.speed = SPEED_UNKNOWN; |
| 3712 |
config.duplex = DUPLEX_UNKNOWN; |
| 3713 |
config.pause = MLO_PAUSE_AN; |
| 3714 |
|
| 3715 |
/* Ignore errors if we're expecting a PHY to attach later */ |
| 3716 |
ret = phylink_validate(pl, support, &config); |
| 3717 |
if (ret) { |
| 3718 |
phylink_err(pl, "validation with support %*pb failed: %pe\n", |
| 3719 |
__ETHTOOL_LINK_MODE_MASK_NBITS, support, |
| 3720 |
ERR_PTR(ret)); |
| 3721 |
return ret; |
| 3722 |
} |
| 3723 |
|
| 3724 |
config.interface = phylink_sfp_select_interface(pl, config.advertising); |
| 3725 |
if (config.interface == PHY_INTERFACE_MODE_NA) |
| 3726 |
return -EINVAL; |
| 3727 |
|
| 3728 |
/* Attach the PHY so that the PHY is present when we do the major |
| 3729 |
* configuration step. |
| 3730 |
*/ |
| 3731 |
ret = phylink_attach_phy(pl, phy, config.interface); |
| 3732 |
if (ret < 0) |
| 3733 |
return ret; |
| 3734 |
|
| 3735 |
/* This will validate the configuration for us. */ |
| 3736 |
ret = phylink_bringup_phy(pl, phy, config.interface); |
| 3737 |
if (ret < 0) { |
| 3738 |
phy_detach(phy); |
| 3739 |
return ret; |
| 3740 |
} |
| 3741 |
|
| 3742 |
pl->link_port = pl->sfp_port; |
| 3743 |
|
| 3744 |
phylink_sfp_set_config(pl, support, &config, true); |
| 3745 |
|
| 3746 |
return 0; |
| 3747 |
} |
| 3748 |
|
| 3749 |
static int phylink_sfp_config_optical(struct phylink *pl) |
| 3750 |
{ |
| 3751 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(support); |
| 3752 |
struct phylink_link_state config; |
| 3753 |
enum inband_type inband_type; |
| 3754 |
phy_interface_t interface; |
| 3755 |
int ret; |
| 3756 |
|
| 3757 |
phylink_dbg(pl, "optical SFP: interfaces=[mac=%*pbl, sfp=%*pbl]\n", |
| 3758 |
(int)PHY_INTERFACE_MODE_MAX, |
| 3759 |
pl->config->supported_interfaces, |
| 3760 |
(int)PHY_INTERFACE_MODE_MAX, |
| 3761 |
pl->sfp_interfaces); |
| 3762 |
|
| 3763 |
/* Find the union of the supported interfaces by the PCS/MAC and |
| 3764 |
* the SFP module. |
| 3765 |
*/ |
| 3766 |
phy_interface_and(pl->sfp_interfaces, pl->config->supported_interfaces, |
| 3767 |
pl->sfp_interfaces); |
| 3768 |
if (phy_interface_empty(pl->sfp_interfaces)) { |
| 3769 |
phylink_err(pl, "unsupported SFP module: no common interface modes\n"); |
| 3770 |
return -EINVAL; |
| 3771 |
} |
| 3772 |
|
| 3773 |
memset(&config, 0, sizeof(config)); |
| 3774 |
linkmode_copy(support, pl->sfp_support); |
| 3775 |
linkmode_copy(config.advertising, pl->sfp_support); |
| 3776 |
config.speed = SPEED_UNKNOWN; |
| 3777 |
config.duplex = DUPLEX_UNKNOWN; |
| 3778 |
config.pause = MLO_PAUSE_AN; |
| 3779 |
|
| 3780 |
/* For all the interfaces that are supported, reduce the sfp_support |
| 3781 |
* mask to only those link modes that can be supported. |
| 3782 |
*/ |
| 3783 |
ret = phylink_validate_mask(pl, NULL, pl->sfp_support, &config, |
| 3784 |
pl->sfp_interfaces); |
| 3785 |
if (ret) { |
| 3786 |
phylink_err(pl, "unsupported SFP module: validation with support %*pb failed\n", |
| 3787 |
__ETHTOOL_LINK_MODE_MASK_NBITS, support); |
| 3788 |
return ret; |
| 3789 |
} |
| 3790 |
|
| 3791 |
interface = phylink_choose_sfp_interface(pl, pl->sfp_interfaces); |
| 3792 |
if (interface == PHY_INTERFACE_MODE_NA) { |
| 3793 |
phylink_err(pl, "failed to select SFP interface\n"); |
| 3794 |
return -EINVAL; |
| 3795 |
} |
| 3796 |
|
| 3797 |
phylink_dbg(pl, "optical SFP: chosen %s interface\n", |
| 3798 |
phy_modes(interface)); |
| 3799 |
|
| 3800 |
inband_type = phylink_get_inband_type(interface); |
| 3801 |
if (inband_type == INBAND_NONE) { |
| 3802 |
/* If this is the sole interface, and there is no inband |
| 3803 |
* support, clear the advertising mask and Autoneg bit in |
| 3804 |
* the support mask. Otherwise, just clear the Autoneg bit |
| 3805 |
* in the advertising mask. |
| 3806 |
*/ |
| 3807 |
if (phy_interface_weight(pl->sfp_interfaces) == 1) { |
| 3808 |
linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 3809 |
pl->sfp_support); |
| 3810 |
linkmode_zero(config.advertising); |
| 3811 |
} else { |
| 3812 |
linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 3813 |
config.advertising); |
| 3814 |
} |
| 3815 |
} |
| 3816 |
|
| 3817 |
if (!phylink_validate_pcs_inband_autoneg(pl, interface, |
| 3818 |
config.advertising)) { |
| 3819 |
phylink_err(pl, "autoneg setting not compatible with PCS"); |
| 3820 |
return -EINVAL; |
| 3821 |
} |
| 3822 |
|
| 3823 |
config.interface = interface; |
| 3824 |
|
| 3825 |
/* Ignore errors if we're expecting a PHY to attach later */ |
| 3826 |
ret = phylink_validate(pl, support, &config); |
| 3827 |
if (ret) { |
| 3828 |
phylink_err(pl, "validation with support %*pb failed: %pe\n", |
| 3829 |
__ETHTOOL_LINK_MODE_MASK_NBITS, support, |
| 3830 |
ERR_PTR(ret)); |
| 3831 |
return ret; |
| 3832 |
} |
| 3833 |
|
| 3834 |
pl->link_port = pl->sfp_port; |
| 3835 |
|
| 3836 |
phylink_sfp_set_config(pl, pl->sfp_support, &config, false); |
| 3837 |
|
| 3838 |
return 0; |
| 3839 |
} |
| 3840 |
|
| 3841 |
static int phylink_sfp_module_insert(void *upstream, |
| 3842 |
const struct sfp_eeprom_id *id) |
| 3843 |
{ |
| 3844 |
const struct sfp_module_caps *caps; |
| 3845 |
struct phylink *pl = upstream; |
| 3846 |
|
| 3847 |
ASSERT_RTNL(); |
| 3848 |
|
| 3849 |
caps = sfp_get_module_caps(pl->sfp_bus); |
| 3850 |
phy_interface_copy(pl->sfp_interfaces, caps->interfaces); |
| 3851 |
linkmode_copy(pl->sfp_support, caps->link_modes); |
| 3852 |
pl->sfp_may_have_phy = caps->may_have_phy; |
| 3853 |
pl->sfp_port = caps->port; |
| 3854 |
|
| 3855 |
/* If this module may have a PHY connecting later, defer until later */ |
| 3856 |
if (pl->sfp_may_have_phy) |
| 3857 |
return 0; |
| 3858 |
|
| 3859 |
return phylink_sfp_config_optical(pl); |
| 3860 |
} |
| 3861 |
|
| 3862 |
static void phylink_sfp_module_remove(void *upstream) |
| 3863 |
{ |
| 3864 |
struct phylink *pl = upstream; |
| 3865 |
|
| 3866 |
phy_interface_zero(pl->sfp_interfaces); |
| 3867 |
} |
| 3868 |
|
| 3869 |
static int phylink_sfp_module_start(void *upstream) |
| 3870 |
{ |
| 3871 |
struct phylink *pl = upstream; |
| 3872 |
|
| 3873 |
/* If this SFP module has a PHY, start the PHY now. */ |
| 3874 |
if (pl->phydev) { |
| 3875 |
phy_start(pl->phydev); |
| 3876 |
return 0; |
| 3877 |
} |
| 3878 |
|
| 3879 |
/* If the module may have a PHY but we didn't detect one we |
| 3880 |
* need to configure the MAC here. |
| 3881 |
*/ |
| 3882 |
if (!pl->sfp_may_have_phy) |
| 3883 |
return 0; |
| 3884 |
|
| 3885 |
return phylink_sfp_config_optical(pl); |
| 3886 |
} |
| 3887 |
|
| 3888 |
static void phylink_sfp_module_stop(void *upstream) |
| 3889 |
{ |
| 3890 |
struct phylink *pl = upstream; |
| 3891 |
|
| 3892 |
/* If this SFP module has a PHY, stop it. */ |
| 3893 |
if (pl->phydev) |
| 3894 |
phy_stop(pl->phydev); |
| 3895 |
} |
| 3896 |
|
| 3897 |
static void phylink_sfp_link_down(void *upstream) |
| 3898 |
{ |
| 3899 |
struct phylink *pl = upstream; |
| 3900 |
|
| 3901 |
ASSERT_RTNL(); |
| 3902 |
|
| 3903 |
phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_LINK); |
| 3904 |
} |
| 3905 |
|
| 3906 |
static void phylink_sfp_link_up(void *upstream) |
| 3907 |
{ |
| 3908 |
struct phylink *pl = upstream; |
| 3909 |
|
| 3910 |
ASSERT_RTNL(); |
| 3911 |
|
| 3912 |
phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_LINK); |
| 3913 |
} |
| 3914 |
|
| 3915 |
static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy) |
| 3916 |
{ |
| 3917 |
struct phylink *pl = upstream; |
| 3918 |
|
| 3919 |
if (!phy->drv) { |
| 3920 |
phylink_err(pl, "PHY %s (id 0x%.8lx) has no driver loaded\n", |
| 3921 |
phydev_name(phy), (unsigned long)phy->phy_id); |
| 3922 |
phylink_err(pl, "Drivers which handle known common cases: CONFIG_BCM84881_PHY, CONFIG_MARVELL_PHY\n"); |
| 3923 |
return -EINVAL; |
| 3924 |
} |
| 3925 |
|
| 3926 |
/* |
| 3927 |
* This is the new way of dealing with flow control for PHYs, |
| 3928 |
* as described by Timur Tabi in commit 529ed1275263 ("net: phy: |
| 3929 |
* phy drivers should not set SUPPORTED_[Asym_]Pause") except |
| 3930 |
* using our validate call to the MAC, we rely upon the MAC |
| 3931 |
* clearing the bits from both supported and advertising fields. |
| 3932 |
*/ |
| 3933 |
phy_support_asym_pause(phy); |
| 3934 |
|
| 3935 |
/* Set the PHY's host supported interfaces */ |
| 3936 |
phy_interface_and(phy->host_interfaces, phylink_sfp_interfaces, |
| 3937 |
pl->config->supported_interfaces); |
| 3938 |
|
| 3939 |
/* Do the initial configuration */ |
| 3940 |
return phylink_sfp_config_phy(pl, phy); |
| 3941 |
} |
| 3942 |
|
| 3943 |
static void phylink_sfp_disconnect_phy(void *upstream, |
| 3944 |
struct phy_device *phydev) |
| 3945 |
{ |
| 3946 |
phylink_disconnect_phy(upstream); |
| 3947 |
} |
| 3948 |
|
| 3949 |
static const struct sfp_upstream_ops sfp_phylink_ops = { |
| 3950 |
.attach = phylink_sfp_attach, |
| 3951 |
.detach = phylink_sfp_detach, |
| 3952 |
.module_insert = phylink_sfp_module_insert, |
| 3953 |
.module_remove = phylink_sfp_module_remove, |
| 3954 |
.module_start = phylink_sfp_module_start, |
| 3955 |
.module_stop = phylink_sfp_module_stop, |
| 3956 |
.link_up = phylink_sfp_link_up, |
| 3957 |
.link_down = phylink_sfp_link_down, |
| 3958 |
.connect_phy = phylink_sfp_connect_phy, |
| 3959 |
.disconnect_phy = phylink_sfp_disconnect_phy, |
| 3960 |
}; |
| 3961 |
|
| 3962 |
/* Helpers for MAC drivers */ |
| 3963 |
|
| 3964 |
static struct { |
| 3965 |
int bit; |
| 3966 |
int speed; |
| 3967 |
} phylink_c73_priority_resolution[] = { |
| 3968 |
{ ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT, SPEED_100000 }, |
| 3969 |
{ ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT, SPEED_100000 }, |
| 3970 |
/* 100GBASE-KP4 and 100GBASE-CR10 not supported */ |
| 3971 |
{ ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT, SPEED_40000 }, |
| 3972 |
{ ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT, SPEED_40000 }, |
| 3973 |
{ ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, SPEED_10000 }, |
| 3974 |
{ ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, SPEED_10000 }, |
| 3975 |
/* 5GBASE-KR not supported */ |
| 3976 |
{ ETHTOOL_LINK_MODE_2500baseX_Full_BIT, SPEED_2500 }, |
| 3977 |
{ ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, SPEED_1000 }, |
| 3978 |
}; |
| 3979 |
|
| 3980 |
void phylink_resolve_c73(struct phylink_link_state *state) |
| 3981 |
{ |
| 3982 |
int i; |
| 3983 |
|
| 3984 |
for (i = 0; i < ARRAY_SIZE(phylink_c73_priority_resolution); i++) { |
| 3985 |
int bit = phylink_c73_priority_resolution[i].bit; |
| 3986 |
if (linkmode_test_bit(bit, state->advertising) && |
| 3987 |
linkmode_test_bit(bit, state->lp_advertising)) |
| 3988 |
break; |
| 3989 |
} |
| 3990 |
|
| 3991 |
if (i < ARRAY_SIZE(phylink_c73_priority_resolution)) { |
| 3992 |
state->speed = phylink_c73_priority_resolution[i].speed; |
| 3993 |
state->duplex = DUPLEX_FULL; |
| 3994 |
} else { |
| 3995 |
/* negotiation failure */ |
| 3996 |
state->link = false; |
| 3997 |
} |
| 3998 |
|
| 3999 |
phylink_resolve_an_pause(state); |
| 4000 |
} |
| 4001 |
EXPORT_SYMBOL_GPL(phylink_resolve_c73); |
| 4002 |
|
| 4003 |
static void phylink_decode_c37_word(struct phylink_link_state *state, |
| 4004 |
uint16_t config_reg, int speed) |
| 4005 |
{ |
| 4006 |
int fd_bit; |
| 4007 |
|
| 4008 |
if (speed == SPEED_2500) |
| 4009 |
fd_bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT; |
| 4010 |
else |
| 4011 |
fd_bit = ETHTOOL_LINK_MODE_1000baseX_Full_BIT; |
| 4012 |
|
| 4013 |
mii_lpa_mod_linkmode_x(state->lp_advertising, config_reg, fd_bit); |
| 4014 |
|
| 4015 |
if (linkmode_test_bit(fd_bit, state->advertising) && |
| 4016 |
linkmode_test_bit(fd_bit, state->lp_advertising)) { |
| 4017 |
state->speed = speed; |
| 4018 |
state->duplex = DUPLEX_FULL; |
| 4019 |
} else { |
| 4020 |
/* negotiation failure */ |
| 4021 |
state->link = false; |
| 4022 |
} |
| 4023 |
|
| 4024 |
phylink_resolve_an_pause(state); |
| 4025 |
} |
| 4026 |
|
| 4027 |
static void phylink_decode_sgmii_word(struct phylink_link_state *state, |
| 4028 |
uint16_t config_reg) |
| 4029 |
{ |
| 4030 |
if (!(config_reg & LPA_SGMII_LINK)) { |
| 4031 |
state->link = false; |
| 4032 |
return; |
| 4033 |
} |
| 4034 |
|
| 4035 |
switch (config_reg & LPA_SGMII_SPD_MASK) { |
| 4036 |
case LPA_SGMII_10: |
| 4037 |
state->speed = SPEED_10; |
| 4038 |
break; |
| 4039 |
case LPA_SGMII_100: |
| 4040 |
state->speed = SPEED_100; |
| 4041 |
break; |
| 4042 |
case LPA_SGMII_1000: |
| 4043 |
state->speed = SPEED_1000; |
| 4044 |
break; |
| 4045 |
default: |
| 4046 |
state->link = false; |
| 4047 |
return; |
| 4048 |
} |
| 4049 |
if (config_reg & LPA_SGMII_FULL_DUPLEX) |
| 4050 |
state->duplex = DUPLEX_FULL; |
| 4051 |
else |
| 4052 |
state->duplex = DUPLEX_HALF; |
| 4053 |
} |
| 4054 |
|
| 4055 |
/** |
| 4056 |
* phylink_decode_usxgmii_word() - decode the USXGMII word from a MAC PCS |
| 4057 |
* @state: a pointer to a struct phylink_link_state. |
| 4058 |
* @lpa: a 16 bit value which stores the USXGMII auto-negotiation word |
| 4059 |
* |
| 4060 |
* Helper for MAC PCS supporting the USXGMII protocol and the auto-negotiation |
| 4061 |
* code word. Decode the USXGMII code word and populate the corresponding fields |
| 4062 |
* (speed, duplex) into the phylink_link_state structure. |
| 4063 |
*/ |
| 4064 |
void phylink_decode_usxgmii_word(struct phylink_link_state *state, |
| 4065 |
uint16_t lpa) |
| 4066 |
{ |
| 4067 |
switch (lpa & MDIO_USXGMII_SPD_MASK) { |
| 4068 |
case MDIO_USXGMII_10: |
| 4069 |
state->speed = SPEED_10; |
| 4070 |
break; |
| 4071 |
case MDIO_USXGMII_100: |
| 4072 |
state->speed = SPEED_100; |
| 4073 |
break; |
| 4074 |
case MDIO_USXGMII_1000: |
| 4075 |
state->speed = SPEED_1000; |
| 4076 |
break; |
| 4077 |
case MDIO_USXGMII_2500: |
| 4078 |
state->speed = SPEED_2500; |
| 4079 |
break; |
| 4080 |
case MDIO_USXGMII_5000: |
| 4081 |
state->speed = SPEED_5000; |
| 4082 |
break; |
| 4083 |
case MDIO_USXGMII_10G: |
| 4084 |
state->speed = SPEED_10000; |
| 4085 |
break; |
| 4086 |
default: |
| 4087 |
state->link = false; |
| 4088 |
return; |
| 4089 |
} |
| 4090 |
|
| 4091 |
if (lpa & MDIO_USXGMII_FULL_DUPLEX) |
| 4092 |
state->duplex = DUPLEX_FULL; |
| 4093 |
else |
| 4094 |
state->duplex = DUPLEX_HALF; |
| 4095 |
} |
| 4096 |
EXPORT_SYMBOL_GPL(phylink_decode_usxgmii_word); |
| 4097 |
|
| 4098 |
/** |
| 4099 |
* phylink_decode_usgmii_word() - decode the USGMII word from a MAC PCS |
| 4100 |
* @state: a pointer to a struct phylink_link_state. |
| 4101 |
* @lpa: a 16 bit value which stores the USGMII auto-negotiation word |
| 4102 |
* |
| 4103 |
* Helper for MAC PCS supporting the USGMII protocol and the auto-negotiation |
| 4104 |
* code word. Decode the USGMII code word and populate the corresponding fields |
| 4105 |
* (speed, duplex) into the phylink_link_state structure. The structure for this |
| 4106 |
* word is the same as the USXGMII word, except it only supports speeds up to |
| 4107 |
* 1Gbps. |
| 4108 |
*/ |
| 4109 |
static void phylink_decode_usgmii_word(struct phylink_link_state *state, |
| 4110 |
uint16_t lpa) |
| 4111 |
{ |
| 4112 |
switch (lpa & MDIO_USXGMII_SPD_MASK) { |
| 4113 |
case MDIO_USXGMII_10: |
| 4114 |
state->speed = SPEED_10; |
| 4115 |
break; |
| 4116 |
case MDIO_USXGMII_100: |
| 4117 |
state->speed = SPEED_100; |
| 4118 |
break; |
| 4119 |
case MDIO_USXGMII_1000: |
| 4120 |
state->speed = SPEED_1000; |
| 4121 |
break; |
| 4122 |
default: |
| 4123 |
state->link = false; |
| 4124 |
return; |
| 4125 |
} |
| 4126 |
|
| 4127 |
if (lpa & MDIO_USXGMII_FULL_DUPLEX) |
| 4128 |
state->duplex = DUPLEX_FULL; |
| 4129 |
else |
| 4130 |
state->duplex = DUPLEX_HALF; |
| 4131 |
} |
| 4132 |
|
| 4133 |
/** |
| 4134 |
* phylink_mii_c22_pcs_decode_state() - Decode MAC PCS state from MII registers |
| 4135 |
* @state: a pointer to a &struct phylink_link_state. |
| 4136 |
* @neg_mode: link negotiation mode (PHYLINK_PCS_NEG_xxx) |
| 4137 |
* @bmsr: The value of the %MII_BMSR register |
| 4138 |
* @lpa: The value of the %MII_LPA register |
| 4139 |
* |
| 4140 |
* Helper for MAC PCS supporting the 802.3 clause 22 register set for |
| 4141 |
* clause 37 negotiation and/or SGMII control. |
| 4142 |
* |
| 4143 |
* Parse the Clause 37 or Cisco SGMII link partner negotiation word into |
| 4144 |
* the phylink @state structure. This is suitable to be used for implementing |
| 4145 |
* the pcs_get_state() member of the struct phylink_pcs_ops structure if |
| 4146 |
* accessing @bmsr and @lpa cannot be done with MDIO directly. |
| 4147 |
*/ |
| 4148 |
void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state, |
| 4149 |
unsigned int neg_mode, u16 bmsr, u16 lpa) |
| 4150 |
{ |
| 4151 |
state->link = !!(bmsr & BMSR_LSTATUS); |
| 4152 |
state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE); |
| 4153 |
|
| 4154 |
/* If the link is down, the advertisement data is undefined. */ |
| 4155 |
if (!state->link) |
| 4156 |
return; |
| 4157 |
|
| 4158 |
switch (state->interface) { |
| 4159 |
case PHY_INTERFACE_MODE_1000BASEX: |
| 4160 |
if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) { |
| 4161 |
phylink_decode_c37_word(state, lpa, SPEED_1000); |
| 4162 |
} else { |
| 4163 |
state->speed = SPEED_1000; |
| 4164 |
state->duplex = DUPLEX_FULL; |
| 4165 |
state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX; |
| 4166 |
} |
| 4167 |
break; |
| 4168 |
|
| 4169 |
case PHY_INTERFACE_MODE_2500BASEX: |
| 4170 |
if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) { |
| 4171 |
phylink_decode_c37_word(state, lpa, SPEED_2500); |
| 4172 |
} else { |
| 4173 |
state->speed = SPEED_2500; |
| 4174 |
state->duplex = DUPLEX_FULL; |
| 4175 |
state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX; |
| 4176 |
} |
| 4177 |
break; |
| 4178 |
|
| 4179 |
case PHY_INTERFACE_MODE_SGMII: |
| 4180 |
case PHY_INTERFACE_MODE_QSGMII: |
| 4181 |
if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) |
| 4182 |
phylink_decode_sgmii_word(state, lpa); |
| 4183 |
break; |
| 4184 |
|
| 4185 |
case PHY_INTERFACE_MODE_QUSGMII: |
| 4186 |
if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) |
| 4187 |
phylink_decode_usgmii_word(state, lpa); |
| 4188 |
break; |
| 4189 |
|
| 4190 |
default: |
| 4191 |
state->link = false; |
| 4192 |
break; |
| 4193 |
} |
| 4194 |
} |
| 4195 |
EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_decode_state); |
| 4196 |
|
| 4197 |
/** |
| 4198 |
* phylink_mii_c22_pcs_get_state() - read the MAC PCS state |
| 4199 |
* @pcs: a pointer to a &struct mdio_device. |
| 4200 |
* @neg_mode: link negotiation mode (PHYLINK_PCS_NEG_xxx) |
| 4201 |
* @state: a pointer to a &struct phylink_link_state. |
| 4202 |
* |
| 4203 |
* Helper for MAC PCS supporting the 802.3 clause 22 register set for |
| 4204 |
* clause 37 negotiation and/or SGMII control. |
| 4205 |
* |
| 4206 |
* Read the MAC PCS state from the MII device configured in @config and |
| 4207 |
* parse the Clause 37 or Cisco SGMII link partner negotiation word into |
| 4208 |
* the phylink @state structure. This is suitable to be directly plugged |
| 4209 |
* into the pcs_get_state() member of the struct phylink_pcs_ops |
| 4210 |
* structure. |
| 4211 |
*/ |
| 4212 |
void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs, |
| 4213 |
unsigned int neg_mode, |
| 4214 |
struct phylink_link_state *state) |
| 4215 |
{ |
| 4216 |
int bmsr, lpa; |
| 4217 |
|
| 4218 |
bmsr = mdiodev_read(pcs, MII_BMSR); |
| 4219 |
lpa = mdiodev_read(pcs, MII_LPA); |
| 4220 |
if (bmsr < 0 || lpa < 0) { |
| 4221 |
state->link = false; |
| 4222 |
return; |
| 4223 |
} |
| 4224 |
|
| 4225 |
phylink_mii_c22_pcs_decode_state(state, neg_mode, bmsr, lpa); |
| 4226 |
} |
| 4227 |
EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_get_state); |
| 4228 |
|
| 4229 |
/** |
| 4230 |
* phylink_mii_c22_pcs_encode_advertisement() - configure the clause 37 PCS |
| 4231 |
* advertisement |
| 4232 |
* @interface: the PHY interface mode being configured |
| 4233 |
* @advertising: the ethtool advertisement mask |
| 4234 |
* |
| 4235 |
* Helper for MAC PCS supporting the 802.3 clause 22 register set for |
| 4236 |
* clause 37 negotiation and/or SGMII control. |
| 4237 |
* |
| 4238 |
* Encode the clause 37 PCS advertisement as specified by @interface and |
| 4239 |
* @advertising. |
| 4240 |
* |
| 4241 |
* Return: The new value for @adv, or ``-EINVAL`` if it should not be changed. |
| 4242 |
*/ |
| 4243 |
int phylink_mii_c22_pcs_encode_advertisement(phy_interface_t interface, |
| 4244 |
const unsigned long *advertising) |
| 4245 |
{ |
| 4246 |
u16 adv; |
| 4247 |
|
| 4248 |
switch (interface) { |
| 4249 |
case PHY_INTERFACE_MODE_1000BASEX: |
| 4250 |
case PHY_INTERFACE_MODE_2500BASEX: |
| 4251 |
adv = ADVERTISE_1000XFULL; |
| 4252 |
if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, |
| 4253 |
advertising)) |
| 4254 |
adv |= ADVERTISE_1000XPAUSE; |
| 4255 |
if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| 4256 |
advertising)) |
| 4257 |
adv |= ADVERTISE_1000XPSE_ASYM; |
| 4258 |
return adv; |
| 4259 |
case PHY_INTERFACE_MODE_SGMII: |
| 4260 |
case PHY_INTERFACE_MODE_QSGMII: |
| 4261 |
return 0x0001; |
| 4262 |
default: |
| 4263 |
/* Nothing to do for other modes */ |
| 4264 |
return -EINVAL; |
| 4265 |
} |
| 4266 |
} |
| 4267 |
EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_encode_advertisement); |
| 4268 |
|
| 4269 |
/** |
| 4270 |
* phylink_mii_c22_pcs_config() - configure clause 22 PCS |
| 4271 |
* @pcs: a pointer to a &struct mdio_device. |
| 4272 |
* @interface: the PHY interface mode being configured |
| 4273 |
* @advertising: the ethtool advertisement mask |
| 4274 |
* @neg_mode: PCS negotiation mode |
| 4275 |
* |
| 4276 |
* Configure a Clause 22 PCS PHY with the appropriate negotiation |
| 4277 |
* parameters for the @mode, @interface and @advertising parameters. |
| 4278 |
* Returns negative error number on failure, zero if the advertisement |
| 4279 |
* has not changed, or positive if there is a change. |
| 4280 |
*/ |
| 4281 |
int phylink_mii_c22_pcs_config(struct mdio_device *pcs, |
| 4282 |
phy_interface_t interface, |
| 4283 |
const unsigned long *advertising, |
| 4284 |
unsigned int neg_mode) |
| 4285 |
{ |
| 4286 |
bool changed = 0; |
| 4287 |
u16 bmcr; |
| 4288 |
int ret, adv; |
| 4289 |
|
| 4290 |
adv = phylink_mii_c22_pcs_encode_advertisement(interface, advertising); |
| 4291 |
if (adv >= 0) { |
| 4292 |
ret = mdiobus_modify_changed(pcs->bus, pcs->addr, |
| 4293 |
MII_ADVERTISE, 0xffff, adv); |
| 4294 |
if (ret < 0) |
| 4295 |
return ret; |
| 4296 |
changed = ret; |
| 4297 |
} |
| 4298 |
|
| 4299 |
if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) |
| 4300 |
bmcr = BMCR_ANENABLE; |
| 4301 |
else |
| 4302 |
bmcr = 0; |
| 4303 |
|
| 4304 |
/* Configure the inband state. Ensure ISOLATE bit is disabled */ |
| 4305 |
ret = mdiodev_modify(pcs, MII_BMCR, BMCR_ANENABLE | BMCR_ISOLATE, bmcr); |
| 4306 |
if (ret < 0) |
| 4307 |
return ret; |
| 4308 |
|
| 4309 |
return changed; |
| 4310 |
} |
| 4311 |
EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_config); |
| 4312 |
|
| 4313 |
/** |
| 4314 |
* phylink_mii_c22_pcs_an_restart() - restart 802.3z autonegotiation |
| 4315 |
* @pcs: a pointer to a &struct mdio_device. |
| 4316 |
* |
| 4317 |
* Helper for MAC PCS supporting the 802.3 clause 22 register set for |
| 4318 |
* clause 37 negotiation. |
| 4319 |
* |
| 4320 |
* Restart the clause 37 negotiation with the link partner. This is |
| 4321 |
* suitable to be directly plugged into the pcs_get_state() member |
| 4322 |
* of the struct phylink_pcs_ops structure. |
| 4323 |
*/ |
| 4324 |
void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs) |
| 4325 |
{ |
| 4326 |
int val = mdiodev_read(pcs, MII_BMCR); |
| 4327 |
|
| 4328 |
if (val >= 0) { |
| 4329 |
val |= BMCR_ANRESTART; |
| 4330 |
|
| 4331 |
mdiodev_write(pcs, MII_BMCR, val); |
| 4332 |
} |
| 4333 |
} |
| 4334 |
EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_an_restart); |
| 4335 |
|
| 4336 |
void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs, |
| 4337 |
struct phylink_link_state *state) |
| 4338 |
{ |
| 4339 |
struct mii_bus *bus = pcs->bus; |
| 4340 |
int addr = pcs->addr; |
| 4341 |
int stat; |
| 4342 |
|
| 4343 |
stat = mdiobus_c45_read(bus, addr, MDIO_MMD_PCS, MDIO_STAT1); |
| 4344 |
if (stat < 0) { |
| 4345 |
state->link = false; |
| 4346 |
return; |
| 4347 |
} |
| 4348 |
|
| 4349 |
state->link = !!(stat & MDIO_STAT1_LSTATUS); |
| 4350 |
if (!state->link) |
| 4351 |
return; |
| 4352 |
|
| 4353 |
switch (state->interface) { |
| 4354 |
case PHY_INTERFACE_MODE_10GBASER: |
| 4355 |
state->speed = SPEED_10000; |
| 4356 |
state->duplex = DUPLEX_FULL; |
| 4357 |
break; |
| 4358 |
|
| 4359 |
default: |
| 4360 |
break; |
| 4361 |
} |
| 4362 |
} |
| 4363 |
EXPORT_SYMBOL_GPL(phylink_mii_c45_pcs_get_state); |
| 4364 |
|
| 4365 |
/** |
| 4366 |
* phylink_replay_link_begin() - begin replay of link callbacks for driver |
| 4367 |
* which loses state |
| 4368 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 4369 |
* |
| 4370 |
* Helper for MAC drivers which may perform a destructive reset at runtime. |
| 4371 |
* Both the own driver's mac_link_down() method is called, as well as the |
| 4372 |
* pcs_link_down() method of the split PCS (if any). |
| 4373 |
* |
| 4374 |
* This is similar to phylink_stop(), except it does not alter the state of |
| 4375 |
* the phylib PHY (it is assumed that it is not affected by the MAC destructive |
| 4376 |
* reset). |
| 4377 |
*/ |
| 4378 |
void phylink_replay_link_begin(struct phylink *pl) |
| 4379 |
{ |
| 4380 |
ASSERT_RTNL(); |
| 4381 |
|
| 4382 |
phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_REPLAY); |
| 4383 |
} |
| 4384 |
EXPORT_SYMBOL_GPL(phylink_replay_link_begin); |
| 4385 |
|
| 4386 |
/** |
| 4387 |
* phylink_replay_link_end() - end replay of link callbacks for driver |
| 4388 |
* which lost state |
| 4389 |
* @pl: a pointer to a &struct phylink returned from phylink_create() |
| 4390 |
* |
| 4391 |
* Helper for MAC drivers which may perform a destructive reset at runtime. |
| 4392 |
* Both the own driver's mac_config() and mac_link_up() methods, as well as the |
| 4393 |
* pcs_config() and pcs_link_up() method of the split PCS (if any), are called. |
| 4394 |
* |
| 4395 |
* This is similar to phylink_start(), except it does not alter the state of |
| 4396 |
* the phylib PHY. |
| 4397 |
* |
| 4398 |
* One must call this method only within the same rtnl_lock() critical section |
| 4399 |
* as a previous phylink_replay_link_start(). |
| 4400 |
*/ |
| 4401 |
void phylink_replay_link_end(struct phylink *pl) |
| 4402 |
{ |
| 4403 |
ASSERT_RTNL(); |
| 4404 |
|
| 4405 |
if (WARN(!test_bit(PHYLINK_DISABLE_REPLAY, |
| 4406 |
&pl->phylink_disable_state), |
| 4407 |
"phylink_replay_link_end() called without a prior phylink_replay_link_begin()\n")) |
| 4408 |
return; |
| 4409 |
|
| 4410 |
pl->force_major_config = true; |
| 4411 |
phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_REPLAY); |
| 4412 |
flush_work(&pl->resolve); |
| 4413 |
} |
| 4414 |
EXPORT_SYMBOL_GPL(phylink_replay_link_end); |
| 4415 |
|
| 4416 |
static int __init phylink_init(void) |
| 4417 |
{ |
| 4418 |
for (int i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); ++i) |
| 4419 |
__set_bit(phylink_sfp_interface_preference[i], |
| 4420 |
phylink_sfp_interfaces); |
| 4421 |
|
| 4422 |
return 0; |
| 4423 |
} |
| 4424 |
|
| 4425 |
module_init(phylink_init); |
| 4426 |
|
| 4427 |
MODULE_LICENSE("GPL v2"); |
| 4428 |
MODULE_DESCRIPTION("phylink models the MAC to optional PHY connection"); |