| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* drivers/net/phy/national.c |
| 4 |
* |
| 5 |
* Driver for National Semiconductor PHYs |
| 6 |
* |
| 7 |
* Author: Stuart Menefy <[email protected]> |
| 8 |
* Maintainer: Giuseppe Cavallaro <[email protected]> |
| 9 |
* |
| 10 |
* Copyright (c) 2008 STMicroelectronics Limited |
| 11 |
*/ |
| 12 |
|
| 13 |
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 14 |
|
| 15 |
#include <linux/kernel.h> |
| 16 |
#include <linux/module.h> |
| 17 |
#include <linux/mii.h> |
| 18 |
#include <linux/ethtool.h> |
| 19 |
#include <linux/phy.h> |
| 20 |
#include <linux/netdevice.h> |
| 21 |
|
| 22 |
/* DP83865 phy identifier values */ |
| 23 |
#define DP83865_PHY_ID 0x20005c7a |
| 24 |
|
| 25 |
#define DP83865_INT_STATUS 0x14 |
| 26 |
#define DP83865_INT_MASK 0x15 |
| 27 |
#define DP83865_INT_CLEAR 0x17 |
| 28 |
|
| 29 |
#define DP83865_INT_REMOTE_FAULT 0x0008 |
| 30 |
#define DP83865_INT_ANE_COMPLETED 0x0010 |
| 31 |
#define DP83865_INT_LINK_CHANGE 0xe000 |
| 32 |
#define DP83865_INT_MASK_DEFAULT (DP83865_INT_REMOTE_FAULT | \ |
| 33 |
DP83865_INT_ANE_COMPLETED | \ |
| 34 |
DP83865_INT_LINK_CHANGE) |
| 35 |
|
| 36 |
/* Advanced proprietary configuration */ |
| 37 |
#define NS_EXP_MEM_CTL 0x16 |
| 38 |
#define NS_EXP_MEM_DATA 0x1d |
| 39 |
#define NS_EXP_MEM_ADD 0x1e |
| 40 |
|
| 41 |
#define LED_CTRL_REG 0x13 |
| 42 |
#define AN_FALLBACK_AN 0x0001 |
| 43 |
#define AN_FALLBACK_CRC 0x0002 |
| 44 |
#define AN_FALLBACK_IE 0x0004 |
| 45 |
#define ALL_FALLBACK_ON (AN_FALLBACK_AN | AN_FALLBACK_CRC | AN_FALLBACK_IE) |
| 46 |
|
| 47 |
enum hdx_loopback { |
| 48 |
hdx_loopback_on = 0, |
| 49 |
hdx_loopback_off = 1, |
| 50 |
}; |
| 51 |
|
| 52 |
static u8 ns_exp_read(struct phy_device *phydev, u16 reg) |
| 53 |
{ |
| 54 |
phy_write(phydev, NS_EXP_MEM_ADD, reg); |
| 55 |
return phy_read(phydev, NS_EXP_MEM_DATA); |
| 56 |
} |
| 57 |
|
| 58 |
static void ns_exp_write(struct phy_device *phydev, u16 reg, u8 data) |
| 59 |
{ |
| 60 |
phy_write(phydev, NS_EXP_MEM_ADD, reg); |
| 61 |
phy_write(phydev, NS_EXP_MEM_DATA, data); |
| 62 |
} |
| 63 |
|
| 64 |
static int ns_ack_interrupt(struct phy_device *phydev) |
| 65 |
{ |
| 66 |
int ret = phy_read(phydev, DP83865_INT_STATUS); |
| 67 |
if (ret < 0) |
| 68 |
return ret; |
| 69 |
|
| 70 |
/* Clear the interrupt status bit by writing a “1” |
| 71 |
* to the corresponding bit in INT_CLEAR (2:0 are reserved) |
| 72 |
*/ |
| 73 |
ret = phy_write(phydev, DP83865_INT_CLEAR, ret & ~0x7); |
| 74 |
|
| 75 |
return ret; |
| 76 |
} |
| 77 |
|
| 78 |
static irqreturn_t ns_handle_interrupt(struct phy_device *phydev) |
| 79 |
{ |
| 80 |
int irq_status; |
| 81 |
|
| 82 |
irq_status = phy_read(phydev, DP83865_INT_STATUS); |
| 83 |
if (irq_status < 0) { |
| 84 |
phy_error(phydev); |
| 85 |
return IRQ_NONE; |
| 86 |
} |
| 87 |
|
| 88 |
if (!(irq_status & DP83865_INT_MASK_DEFAULT)) |
| 89 |
return IRQ_NONE; |
| 90 |
|
| 91 |
/* clear the interrupt */ |
| 92 |
phy_write(phydev, DP83865_INT_CLEAR, irq_status & ~0x7); |
| 93 |
|
| 94 |
phy_trigger_machine(phydev); |
| 95 |
|
| 96 |
return IRQ_HANDLED; |
| 97 |
} |
| 98 |
|
| 99 |
static int ns_config_intr(struct phy_device *phydev) |
| 100 |
{ |
| 101 |
int err; |
| 102 |
|
| 103 |
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { |
| 104 |
err = ns_ack_interrupt(phydev); |
| 105 |
if (err) |
| 106 |
return err; |
| 107 |
|
| 108 |
err = phy_write(phydev, DP83865_INT_MASK, |
| 109 |
DP83865_INT_MASK_DEFAULT); |
| 110 |
} else { |
| 111 |
err = phy_write(phydev, DP83865_INT_MASK, 0); |
| 112 |
if (err) |
| 113 |
return err; |
| 114 |
|
| 115 |
err = ns_ack_interrupt(phydev); |
| 116 |
} |
| 117 |
|
| 118 |
return err; |
| 119 |
} |
| 120 |
|
| 121 |
static void ns_giga_speed_fallback(struct phy_device *phydev, int mode) |
| 122 |
{ |
| 123 |
int bmcr = phy_read(phydev, MII_BMCR); |
| 124 |
|
| 125 |
phy_write(phydev, MII_BMCR, (bmcr | BMCR_PDOWN)); |
| 126 |
|
| 127 |
/* Enable 8 bit expended memory read/write (no auto increment) */ |
| 128 |
phy_write(phydev, NS_EXP_MEM_CTL, 0); |
| 129 |
phy_write(phydev, NS_EXP_MEM_ADD, 0x1C0); |
| 130 |
phy_write(phydev, NS_EXP_MEM_DATA, 0x0008); |
| 131 |
phy_write(phydev, MII_BMCR, (bmcr & ~BMCR_PDOWN)); |
| 132 |
phy_write(phydev, LED_CTRL_REG, mode); |
| 133 |
} |
| 134 |
|
| 135 |
static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable) |
| 136 |
{ |
| 137 |
u16 lb_dis = BIT(1); |
| 138 |
|
| 139 |
if (disable) |
| 140 |
ns_exp_write(phydev, 0x1c0, |
| 141 |
ns_exp_read(phydev, 0x1c0) | lb_dis); |
| 142 |
else |
| 143 |
ns_exp_write(phydev, 0x1c0, |
| 144 |
ns_exp_read(phydev, 0x1c0) & ~lb_dis); |
| 145 |
|
| 146 |
pr_debug("10BASE-T HDX loopback %s\n", |
| 147 |
(ns_exp_read(phydev, 0x1c0) & lb_dis) ? "off" : "on"); |
| 148 |
} |
| 149 |
|
| 150 |
static int ns_config_init(struct phy_device *phydev) |
| 151 |
{ |
| 152 |
ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON); |
| 153 |
/* In the latest MAC or switches design, the 10 Mbps loopback |
| 154 |
* is desired to be turned off. |
| 155 |
*/ |
| 156 |
ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off); |
| 157 |
return ns_ack_interrupt(phydev); |
| 158 |
} |
| 159 |
|
| 160 |
static struct phy_driver dp83865_driver[] = { { |
| 161 |
.phy_id = DP83865_PHY_ID, |
| 162 |
.phy_id_mask = 0xfffffff0, |
| 163 |
.name = "NatSemi DP83865", |
| 164 |
/* PHY_GBIT_FEATURES */ |
| 165 |
.config_init = ns_config_init, |
| 166 |
.config_intr = ns_config_intr, |
| 167 |
.handle_interrupt = ns_handle_interrupt, |
| 168 |
} }; |
| 169 |
|
| 170 |
module_phy_driver(dp83865_driver); |
| 171 |
|
| 172 |
MODULE_DESCRIPTION("NatSemi PHY driver"); |
| 173 |
MODULE_AUTHOR("Stuart Menefy"); |
| 174 |
MODULE_LICENSE("GPL"); |
| 175 |
|
| 176 |
static const struct mdio_device_id __maybe_unused ns_tbl[] = { |
| 177 |
{ DP83865_PHY_ID, 0xfffffff0 }, |
| 178 |
{ } |
| 179 |
}; |
| 180 |
|
| 181 |
MODULE_DEVICE_TABLE(mdio, ns_tbl); |