| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* drivers/net/phy/davicom.c |
| 4 |
* |
| 5 |
* Driver for Davicom PHYs |
| 6 |
* |
| 7 |
* Author: Andy Fleming |
| 8 |
* |
| 9 |
* Copyright (c) 2004 Freescale Semiconductor, Inc. |
| 10 |
*/ |
| 11 |
#include <linux/kernel.h> |
| 12 |
#include <linux/string.h> |
| 13 |
#include <linux/errno.h> |
| 14 |
#include <linux/unistd.h> |
| 15 |
#include <linux/interrupt.h> |
| 16 |
#include <linux/init.h> |
| 17 |
#include <linux/delay.h> |
| 18 |
#include <linux/netdevice.h> |
| 19 |
#include <linux/etherdevice.h> |
| 20 |
#include <linux/skbuff.h> |
| 21 |
#include <linux/spinlock.h> |
| 22 |
#include <linux/mm.h> |
| 23 |
#include <linux/module.h> |
| 24 |
#include <linux/mii.h> |
| 25 |
#include <linux/ethtool.h> |
| 26 |
#include <linux/phy.h> |
| 27 |
|
| 28 |
#include <asm/io.h> |
| 29 |
#include <asm/irq.h> |
| 30 |
#include <linux/uaccess.h> |
| 31 |
|
| 32 |
#define MII_DM9161_SCR 0x10 |
| 33 |
#define MII_DM9161_SCR_INIT 0x0610 |
| 34 |
#define MII_DM9161_SCR_RMII 0x0100 |
| 35 |
|
| 36 |
/* DM9161 Interrupt Register */ |
| 37 |
#define MII_DM9161_INTR 0x15 |
| 38 |
#define MII_DM9161_INTR_PEND 0x8000 |
| 39 |
#define MII_DM9161_INTR_DPLX_MASK 0x0800 |
| 40 |
#define MII_DM9161_INTR_SPD_MASK 0x0400 |
| 41 |
#define MII_DM9161_INTR_LINK_MASK 0x0200 |
| 42 |
#define MII_DM9161_INTR_MASK 0x0100 |
| 43 |
#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 |
| 44 |
#define MII_DM9161_INTR_SPD_CHANGE 0x0008 |
| 45 |
#define MII_DM9161_INTR_LINK_CHANGE 0x0004 |
| 46 |
#define MII_DM9161_INTR_INIT 0x0000 |
| 47 |
#define MII_DM9161_INTR_STOP \ |
| 48 |
(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK | \ |
| 49 |
MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK) |
| 50 |
#define MII_DM9161_INTR_CHANGE \ |
| 51 |
(MII_DM9161_INTR_DPLX_CHANGE | \ |
| 52 |
MII_DM9161_INTR_SPD_CHANGE | \ |
| 53 |
MII_DM9161_INTR_LINK_CHANGE) |
| 54 |
|
| 55 |
/* DM9161 10BT Configuration/Status */ |
| 56 |
#define MII_DM9161_10BTCSR 0x12 |
| 57 |
#define MII_DM9161_10BTCSR_INIT 0x7800 |
| 58 |
|
| 59 |
MODULE_DESCRIPTION("Davicom PHY driver"); |
| 60 |
MODULE_AUTHOR("Andy Fleming"); |
| 61 |
MODULE_LICENSE("GPL"); |
| 62 |
|
| 63 |
|
| 64 |
static int dm9161_ack_interrupt(struct phy_device *phydev) |
| 65 |
{ |
| 66 |
int err = phy_read(phydev, MII_DM9161_INTR); |
| 67 |
|
| 68 |
return (err < 0) ? err : 0; |
| 69 |
} |
| 70 |
|
| 71 |
#define DM9161_DELAY 1 |
| 72 |
static int dm9161_config_intr(struct phy_device *phydev) |
| 73 |
{ |
| 74 |
int temp, err; |
| 75 |
|
| 76 |
temp = phy_read(phydev, MII_DM9161_INTR); |
| 77 |
|
| 78 |
if (temp < 0) |
| 79 |
return temp; |
| 80 |
|
| 81 |
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { |
| 82 |
err = dm9161_ack_interrupt(phydev); |
| 83 |
if (err) |
| 84 |
return err; |
| 85 |
|
| 86 |
temp &= ~(MII_DM9161_INTR_STOP); |
| 87 |
err = phy_write(phydev, MII_DM9161_INTR, temp); |
| 88 |
} else { |
| 89 |
temp |= MII_DM9161_INTR_STOP; |
| 90 |
err = phy_write(phydev, MII_DM9161_INTR, temp); |
| 91 |
if (err) |
| 92 |
return err; |
| 93 |
|
| 94 |
err = dm9161_ack_interrupt(phydev); |
| 95 |
} |
| 96 |
|
| 97 |
return err; |
| 98 |
} |
| 99 |
|
| 100 |
static irqreturn_t dm9161_handle_interrupt(struct phy_device *phydev) |
| 101 |
{ |
| 102 |
int irq_status; |
| 103 |
|
| 104 |
irq_status = phy_read(phydev, MII_DM9161_INTR); |
| 105 |
if (irq_status < 0) { |
| 106 |
phy_error(phydev); |
| 107 |
return IRQ_NONE; |
| 108 |
} |
| 109 |
|
| 110 |
if (!(irq_status & MII_DM9161_INTR_CHANGE)) |
| 111 |
return IRQ_NONE; |
| 112 |
|
| 113 |
phy_trigger_machine(phydev); |
| 114 |
|
| 115 |
return IRQ_HANDLED; |
| 116 |
} |
| 117 |
|
| 118 |
static int dm9161_config_aneg(struct phy_device *phydev) |
| 119 |
{ |
| 120 |
int err; |
| 121 |
|
| 122 |
/* Isolate the PHY */ |
| 123 |
err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE); |
| 124 |
|
| 125 |
if (err < 0) |
| 126 |
return err; |
| 127 |
|
| 128 |
/* Configure the new settings */ |
| 129 |
err = genphy_config_aneg(phydev); |
| 130 |
|
| 131 |
if (err < 0) |
| 132 |
return err; |
| 133 |
|
| 134 |
return 0; |
| 135 |
} |
| 136 |
|
| 137 |
static int dm9161_config_init(struct phy_device *phydev) |
| 138 |
{ |
| 139 |
int err, temp; |
| 140 |
|
| 141 |
/* Isolate the PHY */ |
| 142 |
err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE); |
| 143 |
|
| 144 |
if (err < 0) |
| 145 |
return err; |
| 146 |
|
| 147 |
switch (phydev->interface) { |
| 148 |
case PHY_INTERFACE_MODE_MII: |
| 149 |
temp = MII_DM9161_SCR_INIT; |
| 150 |
break; |
| 151 |
case PHY_INTERFACE_MODE_RMII: |
| 152 |
temp = MII_DM9161_SCR_INIT | MII_DM9161_SCR_RMII; |
| 153 |
break; |
| 154 |
default: |
| 155 |
return -EINVAL; |
| 156 |
} |
| 157 |
|
| 158 |
/* Do not bypass the scrambler/descrambler */ |
| 159 |
err = phy_write(phydev, MII_DM9161_SCR, temp); |
| 160 |
if (err < 0) |
| 161 |
return err; |
| 162 |
|
| 163 |
/* Clear 10BTCSR to default */ |
| 164 |
err = phy_write(phydev, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT); |
| 165 |
|
| 166 |
if (err < 0) |
| 167 |
return err; |
| 168 |
|
| 169 |
/* Reconnect the PHY, and enable Autonegotiation */ |
| 170 |
return phy_write(phydev, MII_BMCR, BMCR_ANENABLE); |
| 171 |
} |
| 172 |
|
| 173 |
static struct phy_driver dm91xx_driver[] = { |
| 174 |
{ |
| 175 |
.phy_id = 0x0181b880, |
| 176 |
.name = "Davicom DM9161E", |
| 177 |
.phy_id_mask = 0x0ffffff0, |
| 178 |
/* PHY_BASIC_FEATURES */ |
| 179 |
.config_init = dm9161_config_init, |
| 180 |
.config_aneg = dm9161_config_aneg, |
| 181 |
.config_intr = dm9161_config_intr, |
| 182 |
.handle_interrupt = dm9161_handle_interrupt, |
| 183 |
}, { |
| 184 |
.phy_id = 0x0181b8b0, |
| 185 |
.name = "Davicom DM9161B/C", |
| 186 |
.phy_id_mask = 0x0ffffff0, |
| 187 |
/* PHY_BASIC_FEATURES */ |
| 188 |
.config_init = dm9161_config_init, |
| 189 |
.config_aneg = dm9161_config_aneg, |
| 190 |
.config_intr = dm9161_config_intr, |
| 191 |
.handle_interrupt = dm9161_handle_interrupt, |
| 192 |
}, { |
| 193 |
.phy_id = 0x0181b8a0, |
| 194 |
.name = "Davicom DM9161A", |
| 195 |
.phy_id_mask = 0x0ffffff0, |
| 196 |
/* PHY_BASIC_FEATURES */ |
| 197 |
.config_init = dm9161_config_init, |
| 198 |
.config_aneg = dm9161_config_aneg, |
| 199 |
.config_intr = dm9161_config_intr, |
| 200 |
.handle_interrupt = dm9161_handle_interrupt, |
| 201 |
}, { |
| 202 |
.phy_id = 0x00181b80, |
| 203 |
.name = "Davicom DM9131", |
| 204 |
.phy_id_mask = 0x0ffffff0, |
| 205 |
/* PHY_BASIC_FEATURES */ |
| 206 |
.config_intr = dm9161_config_intr, |
| 207 |
.handle_interrupt = dm9161_handle_interrupt, |
| 208 |
} }; |
| 209 |
|
| 210 |
module_phy_driver(dm91xx_driver); |
| 211 |
|
| 212 |
static const struct mdio_device_id __maybe_unused davicom_tbl[] = { |
| 213 |
{ 0x0181b880, 0x0ffffff0 }, |
| 214 |
{ 0x0181b8b0, 0x0ffffff0 }, |
| 215 |
{ 0x0181b8a0, 0x0ffffff0 }, |
| 216 |
{ 0x00181b80, 0x0ffffff0 }, |
| 217 |
{ } |
| 218 |
}; |
| 219 |
|
| 220 |
MODULE_DEVICE_TABLE(mdio, davicom_tbl); |