| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* Framework for finding and configuring PHYs. |
| 3 |
* Also contains generic PHY driver |
| 4 |
* |
| 5 |
* Author: Andy Fleming |
| 6 |
* |
| 7 |
* Copyright (c) 2004 Freescale Semiconductor, Inc. |
| 8 |
*/ |
| 9 |
|
| 10 |
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 11 |
|
| 12 |
#include <linux/acpi.h> |
| 13 |
#include <linux/bitmap.h> |
| 14 |
#include <linux/delay.h> |
| 15 |
#include <linux/errno.h> |
| 16 |
#include <linux/etherdevice.h> |
| 17 |
#include <linux/ethtool.h> |
| 18 |
#include <linux/init.h> |
| 19 |
#include <linux/interrupt.h> |
| 20 |
#include <linux/io.h> |
| 21 |
#include <linux/kernel.h> |
| 22 |
#include <linux/list.h> |
| 23 |
#include <linux/mdio.h> |
| 24 |
#include <linux/mii.h> |
| 25 |
#include <linux/mm.h> |
| 26 |
#include <linux/module.h> |
| 27 |
#include <linux/of.h> |
| 28 |
#include <linux/netdevice.h> |
| 29 |
#include <linux/phy.h> |
| 30 |
#include <linux/phylib_stubs.h> |
| 31 |
#include <linux/phy_led_triggers.h> |
| 32 |
#include <linux/phy_link_topology.h> |
| 33 |
#include <linux/phy_port.h> |
| 34 |
#include <linux/pse-pd/pse.h> |
| 35 |
#include <linux/property.h> |
| 36 |
#include <linux/ptp_clock_kernel.h> |
| 37 |
#include <linux/rtnetlink.h> |
| 38 |
#include <linux/sfp.h> |
| 39 |
#include <linux/skbuff.h> |
| 40 |
#include <linux/slab.h> |
| 41 |
#include <linux/string.h> |
| 42 |
#include <linux/uaccess.h> |
| 43 |
#include <linux/unistd.h> |
| 44 |
|
| 45 |
#include "phylib-internal.h" |
| 46 |
#include "phy-caps.h" |
| 47 |
|
| 48 |
MODULE_DESCRIPTION("PHY library"); |
| 49 |
MODULE_AUTHOR("Andy Fleming"); |
| 50 |
MODULE_LICENSE("GPL"); |
| 51 |
|
| 52 |
struct phy_fixup { |
| 53 |
struct list_head list; |
| 54 |
char bus_id[MII_BUS_ID_SIZE + 3]; |
| 55 |
u32 phy_uid; |
| 56 |
u32 phy_uid_mask; |
| 57 |
int (*run)(struct phy_device *phydev); |
| 58 |
}; |
| 59 |
|
| 60 |
static struct phy_driver genphy_c45_driver = { |
| 61 |
.phy_id = 0xffffffff, |
| 62 |
.phy_id_mask = 0xffffffff, |
| 63 |
.name = "Generic Clause 45 PHY", |
| 64 |
.read_status = genphy_c45_read_status, |
| 65 |
}; |
| 66 |
|
| 67 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init; |
| 68 |
EXPORT_SYMBOL_GPL(phy_basic_features); |
| 69 |
|
| 70 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init; |
| 71 |
EXPORT_SYMBOL_GPL(phy_basic_t1_features); |
| 72 |
|
| 73 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1s_p2mp_features) __ro_after_init; |
| 74 |
EXPORT_SYMBOL_GPL(phy_basic_t1s_p2mp_features); |
| 75 |
|
| 76 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init; |
| 77 |
EXPORT_SYMBOL_GPL(phy_gbit_features); |
| 78 |
|
| 79 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init; |
| 80 |
EXPORT_SYMBOL_GPL(phy_gbit_fibre_features); |
| 81 |
|
| 82 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init; |
| 83 |
EXPORT_SYMBOL_GPL(phy_10gbit_features); |
| 84 |
|
| 85 |
const int phy_basic_ports_array[3] = { |
| 86 |
ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 87 |
ETHTOOL_LINK_MODE_TP_BIT, |
| 88 |
ETHTOOL_LINK_MODE_MII_BIT, |
| 89 |
}; |
| 90 |
EXPORT_SYMBOL_GPL(phy_basic_ports_array); |
| 91 |
|
| 92 |
static const int phy_all_ports_features_array[7] __initconst = { |
| 93 |
ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 94 |
ETHTOOL_LINK_MODE_TP_BIT, |
| 95 |
ETHTOOL_LINK_MODE_MII_BIT, |
| 96 |
ETHTOOL_LINK_MODE_FIBRE_BIT, |
| 97 |
ETHTOOL_LINK_MODE_AUI_BIT, |
| 98 |
ETHTOOL_LINK_MODE_BNC_BIT, |
| 99 |
ETHTOOL_LINK_MODE_Backplane_BIT, |
| 100 |
}; |
| 101 |
|
| 102 |
static const int phy_10_100_features_array[4] __initconst = { |
| 103 |
ETHTOOL_LINK_MODE_10baseT_Half_BIT, |
| 104 |
ETHTOOL_LINK_MODE_10baseT_Full_BIT, |
| 105 |
ETHTOOL_LINK_MODE_100baseT_Half_BIT, |
| 106 |
ETHTOOL_LINK_MODE_100baseT_Full_BIT, |
| 107 |
}; |
| 108 |
|
| 109 |
static const int phy_basic_t1_features_array[3] __initconst = { |
| 110 |
ETHTOOL_LINK_MODE_TP_BIT, |
| 111 |
ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, |
| 112 |
ETHTOOL_LINK_MODE_100baseT1_Full_BIT, |
| 113 |
}; |
| 114 |
|
| 115 |
static const int phy_basic_t1s_p2mp_features_array[2] __initconst = { |
| 116 |
ETHTOOL_LINK_MODE_TP_BIT, |
| 117 |
ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT, |
| 118 |
}; |
| 119 |
|
| 120 |
static const int phy_gbit_features_array[2] __initconst = { |
| 121 |
ETHTOOL_LINK_MODE_1000baseT_Half_BIT, |
| 122 |
ETHTOOL_LINK_MODE_1000baseT_Full_BIT, |
| 123 |
}; |
| 124 |
|
| 125 |
static const int phy_eee_cap1_features_array[] __initconst = { |
| 126 |
ETHTOOL_LINK_MODE_100baseT_Full_BIT, |
| 127 |
ETHTOOL_LINK_MODE_1000baseT_Full_BIT, |
| 128 |
ETHTOOL_LINK_MODE_10000baseT_Full_BIT, |
| 129 |
ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, |
| 130 |
ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, |
| 131 |
ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, |
| 132 |
}; |
| 133 |
|
| 134 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap1_features) __ro_after_init; |
| 135 |
EXPORT_SYMBOL_GPL(phy_eee_cap1_features); |
| 136 |
|
| 137 |
static const int phy_eee_cap2_features_array[] __initconst = { |
| 138 |
ETHTOOL_LINK_MODE_2500baseT_Full_BIT, |
| 139 |
ETHTOOL_LINK_MODE_5000baseT_Full_BIT, |
| 140 |
}; |
| 141 |
|
| 142 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap2_features) __ro_after_init; |
| 143 |
EXPORT_SYMBOL_GPL(phy_eee_cap2_features); |
| 144 |
|
| 145 |
static void __init features_init(void) |
| 146 |
{ |
| 147 |
/* 10/100 half/full*/ |
| 148 |
linkmode_set_bit_array(phy_basic_ports_array, |
| 149 |
ARRAY_SIZE(phy_basic_ports_array), |
| 150 |
phy_basic_features); |
| 151 |
linkmode_set_bit_array(phy_10_100_features_array, |
| 152 |
ARRAY_SIZE(phy_10_100_features_array), |
| 153 |
phy_basic_features); |
| 154 |
|
| 155 |
/* 100 full, TP */ |
| 156 |
linkmode_set_bit_array(phy_basic_t1_features_array, |
| 157 |
ARRAY_SIZE(phy_basic_t1_features_array), |
| 158 |
phy_basic_t1_features); |
| 159 |
|
| 160 |
/* 10 half, P2MP, TP */ |
| 161 |
linkmode_set_bit_array(phy_basic_t1s_p2mp_features_array, |
| 162 |
ARRAY_SIZE(phy_basic_t1s_p2mp_features_array), |
| 163 |
phy_basic_t1s_p2mp_features); |
| 164 |
|
| 165 |
/* 10/100 half/full + 1000 half/full */ |
| 166 |
linkmode_set_bit_array(phy_basic_ports_array, |
| 167 |
ARRAY_SIZE(phy_basic_ports_array), |
| 168 |
phy_gbit_features); |
| 169 |
linkmode_set_bit_array(phy_10_100_features_array, |
| 170 |
ARRAY_SIZE(phy_10_100_features_array), |
| 171 |
phy_gbit_features); |
| 172 |
linkmode_set_bit_array(phy_gbit_features_array, |
| 173 |
ARRAY_SIZE(phy_gbit_features_array), |
| 174 |
phy_gbit_features); |
| 175 |
|
| 176 |
/* 10/100 half/full + 1000 half/full + fibre*/ |
| 177 |
linkmode_set_bit_array(phy_basic_ports_array, |
| 178 |
ARRAY_SIZE(phy_basic_ports_array), |
| 179 |
phy_gbit_fibre_features); |
| 180 |
linkmode_set_bit_array(phy_10_100_features_array, |
| 181 |
ARRAY_SIZE(phy_10_100_features_array), |
| 182 |
phy_gbit_fibre_features); |
| 183 |
linkmode_set_bit_array(phy_gbit_features_array, |
| 184 |
ARRAY_SIZE(phy_gbit_features_array), |
| 185 |
phy_gbit_fibre_features); |
| 186 |
linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phy_gbit_fibre_features); |
| 187 |
|
| 188 |
/* 10/100 half/full + 1000 half/full + 10G full*/ |
| 189 |
linkmode_set_bit_array(phy_all_ports_features_array, |
| 190 |
ARRAY_SIZE(phy_all_ports_features_array), |
| 191 |
phy_10gbit_features); |
| 192 |
linkmode_set_bit_array(phy_10_100_features_array, |
| 193 |
ARRAY_SIZE(phy_10_100_features_array), |
| 194 |
phy_10gbit_features); |
| 195 |
linkmode_set_bit_array(phy_gbit_features_array, |
| 196 |
ARRAY_SIZE(phy_gbit_features_array), |
| 197 |
phy_10gbit_features); |
| 198 |
linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, |
| 199 |
phy_10gbit_features); |
| 200 |
|
| 201 |
linkmode_set_bit_array(phy_eee_cap1_features_array, |
| 202 |
ARRAY_SIZE(phy_eee_cap1_features_array), |
| 203 |
phy_eee_cap1_features); |
| 204 |
linkmode_set_bit_array(phy_eee_cap2_features_array, |
| 205 |
ARRAY_SIZE(phy_eee_cap2_features_array), |
| 206 |
phy_eee_cap2_features); |
| 207 |
|
| 208 |
} |
| 209 |
|
| 210 |
void phy_device_free(struct phy_device *phydev) |
| 211 |
{ |
| 212 |
put_device(&phydev->mdio.dev); |
| 213 |
} |
| 214 |
EXPORT_SYMBOL(phy_device_free); |
| 215 |
|
| 216 |
static void phy_mdio_device_free(struct mdio_device *mdiodev) |
| 217 |
{ |
| 218 |
struct phy_device *phydev; |
| 219 |
|
| 220 |
phydev = container_of(mdiodev, struct phy_device, mdio); |
| 221 |
phy_device_free(phydev); |
| 222 |
} |
| 223 |
|
| 224 |
static void phy_device_release(struct device *dev) |
| 225 |
{ |
| 226 |
fwnode_handle_put(dev->fwnode); |
| 227 |
kfree(to_phy_device(dev)); |
| 228 |
} |
| 229 |
|
| 230 |
static void phy_mdio_device_remove(struct mdio_device *mdiodev) |
| 231 |
{ |
| 232 |
struct phy_device *phydev; |
| 233 |
|
| 234 |
phydev = container_of(mdiodev, struct phy_device, mdio); |
| 235 |
phy_device_remove(phydev); |
| 236 |
} |
| 237 |
|
| 238 |
static struct phy_driver genphy_driver; |
| 239 |
|
| 240 |
static LIST_HEAD(phy_fixup_list); |
| 241 |
static DEFINE_MUTEX(phy_fixup_lock); |
| 242 |
|
| 243 |
static bool phy_drv_wol_enabled(struct phy_device *phydev) |
| 244 |
{ |
| 245 |
struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL }; |
| 246 |
|
| 247 |
phy_ethtool_get_wol(phydev, &wol); |
| 248 |
|
| 249 |
return wol.wolopts != 0; |
| 250 |
} |
| 251 |
|
| 252 |
bool phy_may_wakeup(struct phy_device *phydev) |
| 253 |
{ |
| 254 |
/* If the PHY is using driver-model based wakeup, use that state. */ |
| 255 |
if (phy_can_wakeup(phydev)) |
| 256 |
return device_may_wakeup(&phydev->mdio.dev); |
| 257 |
|
| 258 |
return phy_drv_wol_enabled(phydev); |
| 259 |
} |
| 260 |
EXPORT_SYMBOL_GPL(phy_may_wakeup); |
| 261 |
|
| 262 |
static void phy_link_change(struct phy_device *phydev, bool up) |
| 263 |
{ |
| 264 |
struct net_device *netdev = phydev->attached_dev; |
| 265 |
|
| 266 |
if (up) |
| 267 |
netif_carrier_on(netdev); |
| 268 |
else |
| 269 |
netif_carrier_off(netdev); |
| 270 |
phydev->adjust_link(netdev); |
| 271 |
if (phydev->mii_ts && phydev->mii_ts->link_state) |
| 272 |
phydev->mii_ts->link_state(phydev->mii_ts, phydev); |
| 273 |
} |
| 274 |
|
| 275 |
/** |
| 276 |
* phy_uses_state_machine - test whether consumer driver uses PAL state machine |
| 277 |
* @phydev: the target PHY device structure |
| 278 |
* |
| 279 |
* Ultimately, this aims to indirectly determine whether the PHY is attached |
| 280 |
* to a consumer which uses the state machine by calling phy_start() and |
| 281 |
* phy_stop(). |
| 282 |
* |
| 283 |
* When the PHY driver consumer uses phylib, it must have previously called |
| 284 |
* phy_connect_direct() or one of its derivatives, so that phy_prepare_link() |
| 285 |
* has set up a hook for monitoring state changes. |
| 286 |
* |
| 287 |
* When the PHY driver is used by the MAC driver consumer through phylink (the |
| 288 |
* only other provider of a phy_link_change() method), using the PHY state |
| 289 |
* machine is not optional. |
| 290 |
* |
| 291 |
* Return: true if consumer calls phy_start() and phy_stop(), false otherwise. |
| 292 |
*/ |
| 293 |
static bool phy_uses_state_machine(struct phy_device *phydev) |
| 294 |
{ |
| 295 |
if (phydev->phy_link_change == phy_link_change) |
| 296 |
return phydev->attached_dev && phydev->adjust_link; |
| 297 |
|
| 298 |
return !!phydev->phy_link_change; |
| 299 |
} |
| 300 |
|
| 301 |
static bool mdio_bus_phy_may_suspend(struct phy_device *phydev) |
| 302 |
{ |
| 303 |
struct device_driver *drv = phydev->mdio.dev.driver; |
| 304 |
struct phy_driver *phydrv = to_phy_driver(drv); |
| 305 |
struct net_device *netdev = phydev->attached_dev; |
| 306 |
|
| 307 |
if (!drv || !phydrv->suspend) |
| 308 |
return false; |
| 309 |
|
| 310 |
/* If the PHY on the mido bus is not attached but has WOL enabled |
| 311 |
* we cannot suspend the PHY. |
| 312 |
*/ |
| 313 |
if (!netdev && phy_may_wakeup(phydev)) |
| 314 |
return false; |
| 315 |
|
| 316 |
/* PHY not attached? May suspend if the PHY has not already been |
| 317 |
* suspended as part of a prior call to phy_disconnect() -> |
| 318 |
* phy_detach() -> phy_suspend() because the parent netdev might be the |
| 319 |
* MDIO bus driver and clock gated at this point. |
| 320 |
*/ |
| 321 |
if (!netdev) |
| 322 |
goto out; |
| 323 |
|
| 324 |
if (netdev->ethtool->wol_enabled) |
| 325 |
return false; |
| 326 |
|
| 327 |
/* As long as not all affected network drivers support the |
| 328 |
* wol_enabled flag, let's check for hints that WoL is enabled. |
| 329 |
* Don't suspend PHY if the attached netdev parent may wake up. |
| 330 |
* The parent may point to a PCI device, as in tg3 driver. |
| 331 |
*/ |
| 332 |
if (netdev->dev.parent && device_may_wakeup(netdev->dev.parent)) |
| 333 |
return false; |
| 334 |
|
| 335 |
/* Also don't suspend PHY if the netdev itself may wakeup. This |
| 336 |
* is the case for devices w/o underlaying pwr. mgmt. aware bus, |
| 337 |
* e.g. SoC devices. |
| 338 |
*/ |
| 339 |
if (device_may_wakeup(&netdev->dev)) |
| 340 |
return false; |
| 341 |
|
| 342 |
out: |
| 343 |
return !phydev->suspended; |
| 344 |
} |
| 345 |
|
| 346 |
static __maybe_unused int mdio_bus_phy_suspend(struct device *dev) |
| 347 |
{ |
| 348 |
struct phy_device *phydev = to_phy_device(dev); |
| 349 |
|
| 350 |
if (phydev->mac_managed_pm) |
| 351 |
return 0; |
| 352 |
|
| 353 |
/* Wakeup interrupts may occur during the system sleep transition when |
| 354 |
* the PHY is inaccessible. Set flag to postpone handling until the PHY |
| 355 |
* has resumed. Wait for concurrent interrupt handler to complete. |
| 356 |
*/ |
| 357 |
if (phy_interrupt_is_valid(phydev)) { |
| 358 |
phydev->irq_suspended = 1; |
| 359 |
synchronize_irq(phydev->irq); |
| 360 |
} |
| 361 |
|
| 362 |
/* We must stop the state machine manually, otherwise it stops out of |
| 363 |
* control, possibly with the phydev->lock held. Upon resume, netdev |
| 364 |
* may call phy routines that try to grab the same lock, and that may |
| 365 |
* lead to a deadlock. |
| 366 |
*/ |
| 367 |
if (phy_uses_state_machine(phydev)) |
| 368 |
phy_stop_machine(phydev); |
| 369 |
|
| 370 |
if (!mdio_bus_phy_may_suspend(phydev)) |
| 371 |
return 0; |
| 372 |
|
| 373 |
phydev->suspended_by_mdio_bus = 1; |
| 374 |
|
| 375 |
return phy_suspend(phydev); |
| 376 |
} |
| 377 |
|
| 378 |
static __maybe_unused int mdio_bus_phy_resume(struct device *dev) |
| 379 |
{ |
| 380 |
struct phy_device *phydev = to_phy_device(dev); |
| 381 |
int ret; |
| 382 |
|
| 383 |
if (phydev->mac_managed_pm) |
| 384 |
return 0; |
| 385 |
|
| 386 |
if (!phydev->suspended_by_mdio_bus) |
| 387 |
goto no_resume; |
| 388 |
|
| 389 |
phydev->suspended_by_mdio_bus = 0; |
| 390 |
|
| 391 |
/* If we managed to get here with the PHY state machine in a state |
| 392 |
* neither PHY_HALTED, PHY_READY nor PHY_UP, this is an indication |
| 393 |
* that something went wrong and we should most likely be using |
| 394 |
* MAC managed PM, but we are not. |
| 395 |
*/ |
| 396 |
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY && |
| 397 |
phydev->state != PHY_UP); |
| 398 |
|
| 399 |
ret = phy_init_hw(phydev); |
| 400 |
if (ret < 0) |
| 401 |
return ret; |
| 402 |
|
| 403 |
ret = phy_resume(phydev); |
| 404 |
if (ret < 0) |
| 405 |
return ret; |
| 406 |
no_resume: |
| 407 |
if (phy_interrupt_is_valid(phydev)) { |
| 408 |
phydev->irq_suspended = 0; |
| 409 |
synchronize_irq(phydev->irq); |
| 410 |
|
| 411 |
/* Rerun interrupts which were postponed by phy_interrupt() |
| 412 |
* because they occurred during the system sleep transition. |
| 413 |
*/ |
| 414 |
if (phydev->irq_rerun) { |
| 415 |
phydev->irq_rerun = 0; |
| 416 |
enable_irq(phydev->irq); |
| 417 |
irq_wake_thread(phydev->irq, phydev); |
| 418 |
} |
| 419 |
} |
| 420 |
|
| 421 |
if (phy_uses_state_machine(phydev)) |
| 422 |
phy_start_machine(phydev); |
| 423 |
|
| 424 |
return 0; |
| 425 |
} |
| 426 |
|
| 427 |
static SIMPLE_DEV_PM_OPS(mdio_bus_phy_pm_ops, mdio_bus_phy_suspend, |
| 428 |
mdio_bus_phy_resume); |
| 429 |
|
| 430 |
/** |
| 431 |
* phy_register_fixup - creates a new phy_fixup and adds it to the list |
| 432 |
* @bus_id: A string which matches phydev->mdio.dev.bus_id (or NULL) |
| 433 |
* @phy_uid: Used to match against phydev->phy_id (the UID of the PHY) |
| 434 |
* @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before |
| 435 |
* comparison (or 0 to disable id-based matching) |
| 436 |
* @run: The actual code to be run when a matching PHY is found |
| 437 |
*/ |
| 438 |
static int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, |
| 439 |
int (*run)(struct phy_device *)) |
| 440 |
{ |
| 441 |
struct phy_fixup *fixup = kzalloc_obj(*fixup); |
| 442 |
|
| 443 |
if (!fixup) |
| 444 |
return -ENOMEM; |
| 445 |
|
| 446 |
if (bus_id) |
| 447 |
strscpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id)); |
| 448 |
fixup->phy_uid = phy_uid; |
| 449 |
fixup->phy_uid_mask = phy_uid_mask; |
| 450 |
fixup->run = run; |
| 451 |
|
| 452 |
mutex_lock(&phy_fixup_lock); |
| 453 |
list_add_tail(&fixup->list, &phy_fixup_list); |
| 454 |
mutex_unlock(&phy_fixup_lock); |
| 455 |
|
| 456 |
return 0; |
| 457 |
} |
| 458 |
|
| 459 |
/* Registers a fixup to be run on any PHY with the UID in phy_uid */ |
| 460 |
int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, |
| 461 |
int (*run)(struct phy_device *)) |
| 462 |
{ |
| 463 |
return phy_register_fixup(NULL, phy_uid, phy_uid_mask, run); |
| 464 |
} |
| 465 |
EXPORT_SYMBOL(phy_register_fixup_for_uid); |
| 466 |
|
| 467 |
/* Registers a fixup to be run on the PHY with id string bus_id */ |
| 468 |
int phy_register_fixup_for_id(const char *bus_id, |
| 469 |
int (*run)(struct phy_device *)) |
| 470 |
{ |
| 471 |
return phy_register_fixup(bus_id, 0, 0, run); |
| 472 |
} |
| 473 |
EXPORT_SYMBOL(phy_register_fixup_for_id); |
| 474 |
|
| 475 |
static bool phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup) |
| 476 |
{ |
| 477 |
if (!strcmp(fixup->bus_id, phydev_name(phydev))) |
| 478 |
return true; |
| 479 |
|
| 480 |
if (fixup->phy_uid_mask && |
| 481 |
phy_id_compare(phydev->phy_id, fixup->phy_uid, fixup->phy_uid_mask)) |
| 482 |
return true; |
| 483 |
|
| 484 |
return false; |
| 485 |
} |
| 486 |
|
| 487 |
/* Runs any matching fixups for this phydev */ |
| 488 |
static int phy_scan_fixups(struct phy_device *phydev) |
| 489 |
{ |
| 490 |
struct phy_fixup *fixup; |
| 491 |
|
| 492 |
mutex_lock(&phy_fixup_lock); |
| 493 |
list_for_each_entry(fixup, &phy_fixup_list, list) { |
| 494 |
if (phy_needs_fixup(phydev, fixup)) { |
| 495 |
int err = fixup->run(phydev); |
| 496 |
|
| 497 |
if (err < 0) { |
| 498 |
mutex_unlock(&phy_fixup_lock); |
| 499 |
return err; |
| 500 |
} |
| 501 |
phydev->has_fixups = true; |
| 502 |
} |
| 503 |
} |
| 504 |
mutex_unlock(&phy_fixup_lock); |
| 505 |
|
| 506 |
return 0; |
| 507 |
} |
| 508 |
|
| 509 |
/** |
| 510 |
* genphy_match_phy_device - match a PHY device with a PHY driver |
| 511 |
* @phydev: target phy_device struct |
| 512 |
* @phydrv: target phy_driver struct |
| 513 |
* |
| 514 |
* Description: Checks whether the given PHY device matches the specified |
| 515 |
* PHY driver. For Clause 45 PHYs, iterates over the available device |
| 516 |
* identifiers and compares them against the driver's expected PHY ID, |
| 517 |
* applying the provided mask. For Clause 22 PHYs, a direct ID comparison |
| 518 |
* is performed. |
| 519 |
* |
| 520 |
* Return: 1 if the PHY device matches the driver, 0 otherwise. |
| 521 |
*/ |
| 522 |
int genphy_match_phy_device(struct phy_device *phydev, |
| 523 |
const struct phy_driver *phydrv) |
| 524 |
{ |
| 525 |
if (phydev->is_c45) { |
| 526 |
const int num_ids = ARRAY_SIZE(phydev->c45_ids.device_ids); |
| 527 |
int i; |
| 528 |
|
| 529 |
for (i = 1; i < num_ids; i++) { |
| 530 |
if (phydev->c45_ids.device_ids[i] == 0xffffffff) |
| 531 |
continue; |
| 532 |
|
| 533 |
if (phy_id_compare(phydev->c45_ids.device_ids[i], |
| 534 |
phydrv->phy_id, phydrv->phy_id_mask)) |
| 535 |
return 1; |
| 536 |
} |
| 537 |
|
| 538 |
return 0; |
| 539 |
} |
| 540 |
|
| 541 |
return phy_id_compare(phydev->phy_id, phydrv->phy_id, |
| 542 |
phydrv->phy_id_mask); |
| 543 |
} |
| 544 |
EXPORT_SYMBOL_GPL(genphy_match_phy_device); |
| 545 |
|
| 546 |
static int phy_bus_match(struct device *dev, const struct device_driver *drv) |
| 547 |
{ |
| 548 |
struct phy_device *phydev = to_phy_device(dev); |
| 549 |
const struct phy_driver *phydrv = to_phy_driver(drv); |
| 550 |
|
| 551 |
if (!(phydrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY)) |
| 552 |
return 0; |
| 553 |
|
| 554 |
if (phydrv->match_phy_device) |
| 555 |
return phydrv->match_phy_device(phydev, phydrv); |
| 556 |
|
| 557 |
return genphy_match_phy_device(phydev, phydrv); |
| 558 |
} |
| 559 |
|
| 560 |
static ssize_t |
| 561 |
phy_id_show(struct device *dev, struct device_attribute *attr, char *buf) |
| 562 |
{ |
| 563 |
struct phy_device *phydev = to_phy_device(dev); |
| 564 |
|
| 565 |
return sysfs_emit(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id); |
| 566 |
} |
| 567 |
static DEVICE_ATTR_RO(phy_id); |
| 568 |
|
| 569 |
static ssize_t |
| 570 |
phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf) |
| 571 |
{ |
| 572 |
struct phy_device *phydev = to_phy_device(dev); |
| 573 |
const char *mode = NULL; |
| 574 |
|
| 575 |
if (phydev->is_internal) |
| 576 |
mode = "internal"; |
| 577 |
else |
| 578 |
mode = phy_modes(phydev->interface); |
| 579 |
|
| 580 |
return sysfs_emit(buf, "%s\n", mode); |
| 581 |
} |
| 582 |
static DEVICE_ATTR_RO(phy_interface); |
| 583 |
|
| 584 |
static ssize_t |
| 585 |
phy_has_fixups_show(struct device *dev, struct device_attribute *attr, |
| 586 |
char *buf) |
| 587 |
{ |
| 588 |
struct phy_device *phydev = to_phy_device(dev); |
| 589 |
|
| 590 |
return sysfs_emit(buf, "%d\n", phydev->has_fixups); |
| 591 |
} |
| 592 |
static DEVICE_ATTR_RO(phy_has_fixups); |
| 593 |
|
| 594 |
static ssize_t phy_dev_flags_show(struct device *dev, |
| 595 |
struct device_attribute *attr, |
| 596 |
char *buf) |
| 597 |
{ |
| 598 |
struct phy_device *phydev = to_phy_device(dev); |
| 599 |
|
| 600 |
return sysfs_emit(buf, "0x%08x\n", phydev->dev_flags); |
| 601 |
} |
| 602 |
static DEVICE_ATTR_RO(phy_dev_flags); |
| 603 |
|
| 604 |
static struct attribute *phy_dev_attrs[] = { |
| 605 |
&dev_attr_phy_id.attr, |
| 606 |
&dev_attr_phy_interface.attr, |
| 607 |
&dev_attr_phy_has_fixups.attr, |
| 608 |
&dev_attr_phy_dev_flags.attr, |
| 609 |
NULL, |
| 610 |
}; |
| 611 |
|
| 612 |
static const struct attribute_group phy_dev_group = { |
| 613 |
.attrs = phy_dev_attrs, |
| 614 |
}; |
| 615 |
|
| 616 |
#define MMD_DEVICE_ID_ATTR(n) \ |
| 617 |
static ssize_t mmd##n##_device_id_show(struct device *dev, \ |
| 618 |
struct device_attribute *attr, char *buf) \ |
| 619 |
{ \ |
| 620 |
struct phy_device *phydev = to_phy_device(dev); \ |
| 621 |
return sysfs_emit(buf, "0x%.8lx\n", \ |
| 622 |
(unsigned long)phydev->c45_ids.device_ids[n]); \ |
| 623 |
} \ |
| 624 |
static DEVICE_ATTR_RO(mmd##n##_device_id) |
| 625 |
|
| 626 |
MMD_DEVICE_ID_ATTR(1); |
| 627 |
MMD_DEVICE_ID_ATTR(2); |
| 628 |
MMD_DEVICE_ID_ATTR(3); |
| 629 |
MMD_DEVICE_ID_ATTR(4); |
| 630 |
MMD_DEVICE_ID_ATTR(5); |
| 631 |
MMD_DEVICE_ID_ATTR(6); |
| 632 |
MMD_DEVICE_ID_ATTR(7); |
| 633 |
MMD_DEVICE_ID_ATTR(8); |
| 634 |
MMD_DEVICE_ID_ATTR(9); |
| 635 |
MMD_DEVICE_ID_ATTR(10); |
| 636 |
MMD_DEVICE_ID_ATTR(11); |
| 637 |
MMD_DEVICE_ID_ATTR(12); |
| 638 |
MMD_DEVICE_ID_ATTR(13); |
| 639 |
MMD_DEVICE_ID_ATTR(14); |
| 640 |
MMD_DEVICE_ID_ATTR(15); |
| 641 |
MMD_DEVICE_ID_ATTR(16); |
| 642 |
MMD_DEVICE_ID_ATTR(17); |
| 643 |
MMD_DEVICE_ID_ATTR(18); |
| 644 |
MMD_DEVICE_ID_ATTR(19); |
| 645 |
MMD_DEVICE_ID_ATTR(20); |
| 646 |
MMD_DEVICE_ID_ATTR(21); |
| 647 |
MMD_DEVICE_ID_ATTR(22); |
| 648 |
MMD_DEVICE_ID_ATTR(23); |
| 649 |
MMD_DEVICE_ID_ATTR(24); |
| 650 |
MMD_DEVICE_ID_ATTR(25); |
| 651 |
MMD_DEVICE_ID_ATTR(26); |
| 652 |
MMD_DEVICE_ID_ATTR(27); |
| 653 |
MMD_DEVICE_ID_ATTR(28); |
| 654 |
MMD_DEVICE_ID_ATTR(29); |
| 655 |
MMD_DEVICE_ID_ATTR(30); |
| 656 |
MMD_DEVICE_ID_ATTR(31); |
| 657 |
|
| 658 |
static struct attribute *phy_mmd_attrs[] = { |
| 659 |
&dev_attr_mmd1_device_id.attr, |
| 660 |
&dev_attr_mmd2_device_id.attr, |
| 661 |
&dev_attr_mmd3_device_id.attr, |
| 662 |
&dev_attr_mmd4_device_id.attr, |
| 663 |
&dev_attr_mmd5_device_id.attr, |
| 664 |
&dev_attr_mmd6_device_id.attr, |
| 665 |
&dev_attr_mmd7_device_id.attr, |
| 666 |
&dev_attr_mmd8_device_id.attr, |
| 667 |
&dev_attr_mmd9_device_id.attr, |
| 668 |
&dev_attr_mmd10_device_id.attr, |
| 669 |
&dev_attr_mmd11_device_id.attr, |
| 670 |
&dev_attr_mmd12_device_id.attr, |
| 671 |
&dev_attr_mmd13_device_id.attr, |
| 672 |
&dev_attr_mmd14_device_id.attr, |
| 673 |
&dev_attr_mmd15_device_id.attr, |
| 674 |
&dev_attr_mmd16_device_id.attr, |
| 675 |
&dev_attr_mmd17_device_id.attr, |
| 676 |
&dev_attr_mmd18_device_id.attr, |
| 677 |
&dev_attr_mmd19_device_id.attr, |
| 678 |
&dev_attr_mmd20_device_id.attr, |
| 679 |
&dev_attr_mmd21_device_id.attr, |
| 680 |
&dev_attr_mmd22_device_id.attr, |
| 681 |
&dev_attr_mmd23_device_id.attr, |
| 682 |
&dev_attr_mmd24_device_id.attr, |
| 683 |
&dev_attr_mmd25_device_id.attr, |
| 684 |
&dev_attr_mmd26_device_id.attr, |
| 685 |
&dev_attr_mmd27_device_id.attr, |
| 686 |
&dev_attr_mmd28_device_id.attr, |
| 687 |
&dev_attr_mmd29_device_id.attr, |
| 688 |
&dev_attr_mmd30_device_id.attr, |
| 689 |
&dev_attr_mmd31_device_id.attr, |
| 690 |
NULL |
| 691 |
}; |
| 692 |
|
| 693 |
static umode_t phy_mmd_is_visible(struct kobject *kobj, |
| 694 |
struct attribute *attr, int index) |
| 695 |
{ |
| 696 |
struct device *dev = kobj_to_dev(kobj); |
| 697 |
struct phy_device *phydev = to_phy_device(dev); |
| 698 |
const int i = index + 1; |
| 699 |
|
| 700 |
if (!phydev->is_c45) |
| 701 |
return 0; |
| 702 |
if (i >= ARRAY_SIZE(phydev->c45_ids.device_ids) || |
| 703 |
phydev->c45_ids.device_ids[i] == 0xffffffff) |
| 704 |
return 0; |
| 705 |
|
| 706 |
return attr->mode; |
| 707 |
} |
| 708 |
|
| 709 |
static const struct attribute_group phy_mmd_group = { |
| 710 |
.name = "c45_phy_ids", |
| 711 |
.attrs = phy_mmd_attrs, |
| 712 |
.is_visible = phy_mmd_is_visible, |
| 713 |
}; |
| 714 |
|
| 715 |
static const struct attribute_group *phy_device_groups[] = { |
| 716 |
&phy_dev_group, |
| 717 |
&phy_mmd_group, |
| 718 |
NULL, |
| 719 |
}; |
| 720 |
|
| 721 |
static const struct device_type mdio_bus_phy_type = { |
| 722 |
.name = "PHY", |
| 723 |
.groups = phy_device_groups, |
| 724 |
.release = phy_device_release, |
| 725 |
.pm = pm_ptr(&mdio_bus_phy_pm_ops), |
| 726 |
}; |
| 727 |
|
| 728 |
static int phy_request_driver_module(struct phy_device *dev, u32 phy_id) |
| 729 |
{ |
| 730 |
int ret; |
| 731 |
|
| 732 |
ret = request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, |
| 733 |
MDIO_ID_ARGS(phy_id)); |
| 734 |
/* We only check for failures in executing the usermode binary, |
| 735 |
* not whether a PHY driver module exists for the PHY ID. |
| 736 |
* Accept -ENOENT because this may occur in case no initramfs exists, |
| 737 |
* then modprobe isn't available. |
| 738 |
*/ |
| 739 |
if (IS_ENABLED(CONFIG_MODULES) && ret < 0 && ret != -ENOENT) { |
| 740 |
phydev_err(dev, "error %d loading PHY driver module for ID 0x%08lx\n", |
| 741 |
ret, (unsigned long)phy_id); |
| 742 |
return ret; |
| 743 |
} |
| 744 |
|
| 745 |
return 0; |
| 746 |
} |
| 747 |
|
| 748 |
struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id, |
| 749 |
bool is_c45, |
| 750 |
struct phy_c45_device_ids *c45_ids) |
| 751 |
{ |
| 752 |
struct phy_device *dev; |
| 753 |
struct mdio_device *mdiodev; |
| 754 |
int ret = 0; |
| 755 |
|
| 756 |
/* We allocate the device, and initialize the default values */ |
| 757 |
dev = kzalloc_obj(*dev); |
| 758 |
if (!dev) |
| 759 |
return ERR_PTR(-ENOMEM); |
| 760 |
|
| 761 |
mdiodev = &dev->mdio; |
| 762 |
mdiodev->dev.parent = &bus->dev; |
| 763 |
mdiodev->dev.bus = &mdio_bus_type; |
| 764 |
mdiodev->dev.type = &mdio_bus_phy_type; |
| 765 |
mdiodev->bus = bus; |
| 766 |
mdiodev->bus_match = phy_bus_match; |
| 767 |
mdiodev->addr = addr; |
| 768 |
mdiodev->flags = MDIO_DEVICE_FLAG_PHY; |
| 769 |
mdiodev->device_free = phy_mdio_device_free; |
| 770 |
mdiodev->device_remove = phy_mdio_device_remove; |
| 771 |
mdiodev->reset_state = -1; |
| 772 |
|
| 773 |
dev->speed = SPEED_UNKNOWN; |
| 774 |
dev->duplex = DUPLEX_UNKNOWN; |
| 775 |
dev->pause = false; |
| 776 |
dev->asym_pause = false; |
| 777 |
dev->link = 0; |
| 778 |
dev->port = PORT_TP; |
| 779 |
dev->interface = PHY_INTERFACE_MODE_GMII; |
| 780 |
|
| 781 |
dev->autoneg = AUTONEG_ENABLE; |
| 782 |
|
| 783 |
dev->pma_extable = -ENODATA; |
| 784 |
dev->is_c45 = is_c45; |
| 785 |
dev->phy_id = phy_id; |
| 786 |
if (c45_ids) |
| 787 |
dev->c45_ids = *c45_ids; |
| 788 |
dev->irq = bus->irq[addr]; |
| 789 |
|
| 790 |
dev_set_name(&mdiodev->dev, PHY_ID_FMT, bus->id, addr); |
| 791 |
device_initialize(&mdiodev->dev); |
| 792 |
|
| 793 |
dev->state = PHY_DOWN; |
| 794 |
INIT_LIST_HEAD(&dev->leds); |
| 795 |
INIT_LIST_HEAD(&dev->ports); |
| 796 |
|
| 797 |
/* The driver's probe function must change that to the real number |
| 798 |
* of ports possible on the PHY. We assume by default we are dealing |
| 799 |
* with a single-port PHY |
| 800 |
*/ |
| 801 |
dev->max_n_ports = 1; |
| 802 |
|
| 803 |
mutex_init(&dev->lock); |
| 804 |
INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); |
| 805 |
|
| 806 |
/* Request the appropriate module unconditionally; don't |
| 807 |
* bother trying to do so only if it isn't already loaded, |
| 808 |
* because that gets complicated. A hotplug event would have |
| 809 |
* done an unconditional modprobe anyway. |
| 810 |
* We don't do normal hotplug because it won't work for MDIO |
| 811 |
* -- because it relies on the device staying around for long |
| 812 |
* enough for the driver to get loaded. With MDIO, the NIC |
| 813 |
* driver will get bored and give up as soon as it finds that |
| 814 |
* there's no driver _already_ loaded. |
| 815 |
*/ |
| 816 |
if (is_c45 && c45_ids) { |
| 817 |
const int num_ids = ARRAY_SIZE(c45_ids->device_ids); |
| 818 |
int i; |
| 819 |
|
| 820 |
for (i = 1; i < num_ids; i++) { |
| 821 |
if (c45_ids->device_ids[i] == 0xffffffff) |
| 822 |
continue; |
| 823 |
|
| 824 |
ret = phy_request_driver_module(dev, |
| 825 |
c45_ids->device_ids[i]); |
| 826 |
if (ret) |
| 827 |
break; |
| 828 |
} |
| 829 |
} else { |
| 830 |
ret = phy_request_driver_module(dev, phy_id); |
| 831 |
} |
| 832 |
|
| 833 |
if (ret) { |
| 834 |
put_device(&mdiodev->dev); |
| 835 |
dev = ERR_PTR(ret); |
| 836 |
} |
| 837 |
|
| 838 |
return dev; |
| 839 |
} |
| 840 |
EXPORT_SYMBOL(phy_device_create); |
| 841 |
|
| 842 |
/* phy_c45_probe_present - checks to see if a MMD is present in the package |
| 843 |
* @bus: the target MII bus |
| 844 |
* @prtad: PHY package address on the MII bus |
| 845 |
* @devad: PHY device (MMD) address |
| 846 |
* |
| 847 |
* Read the MDIO_STAT2 register, and check whether a device is responding |
| 848 |
* at this address. |
| 849 |
* |
| 850 |
* Returns: negative error number on bus access error, zero if no device |
| 851 |
* is responding, or positive if a device is present. |
| 852 |
*/ |
| 853 |
static int phy_c45_probe_present(struct mii_bus *bus, int prtad, int devad) |
| 854 |
{ |
| 855 |
int stat2; |
| 856 |
|
| 857 |
stat2 = mdiobus_c45_read(bus, prtad, devad, MDIO_STAT2); |
| 858 |
if (stat2 < 0) |
| 859 |
return stat2; |
| 860 |
|
| 861 |
return (stat2 & MDIO_STAT2_DEVPRST) == MDIO_STAT2_DEVPRST_VAL; |
| 862 |
} |
| 863 |
|
| 864 |
/* get_phy_c45_devs_in_pkg - reads a MMD's devices in package registers. |
| 865 |
* @bus: the target MII bus |
| 866 |
* @addr: PHY address on the MII bus |
| 867 |
* @dev_addr: MMD address in the PHY. |
| 868 |
* @devices_in_package: where to store the devices in package information. |
| 869 |
* |
| 870 |
* Description: reads devices in package registers of a MMD at @dev_addr |
| 871 |
* from PHY at @addr on @bus. |
| 872 |
* |
| 873 |
* Returns: 0 on success, -EIO on failure. |
| 874 |
*/ |
| 875 |
static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr, |
| 876 |
u32 *devices_in_package) |
| 877 |
{ |
| 878 |
int phy_reg; |
| 879 |
|
| 880 |
phy_reg = mdiobus_c45_read(bus, addr, dev_addr, MDIO_DEVS2); |
| 881 |
if (phy_reg < 0) |
| 882 |
return -EIO; |
| 883 |
*devices_in_package = phy_reg << 16; |
| 884 |
|
| 885 |
phy_reg = mdiobus_c45_read(bus, addr, dev_addr, MDIO_DEVS1); |
| 886 |
if (phy_reg < 0) |
| 887 |
return -EIO; |
| 888 |
*devices_in_package |= phy_reg; |
| 889 |
|
| 890 |
return 0; |
| 891 |
} |
| 892 |
|
| 893 |
/** |
| 894 |
* get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs. |
| 895 |
* @bus: the target MII bus |
| 896 |
* @addr: PHY address on the MII bus |
| 897 |
* @c45_ids: where to store the c45 ID information. |
| 898 |
* |
| 899 |
* Read the PHY "devices in package". If this appears to be valid, read |
| 900 |
* the PHY identifiers for each device. Return the "devices in package" |
| 901 |
* and identifiers in @c45_ids. |
| 902 |
* |
| 903 |
* Returns zero on success, %-EIO on bus access error, or %-ENODEV if |
| 904 |
* the "devices in package" is invalid or no device responds. |
| 905 |
*/ |
| 906 |
static int get_phy_c45_ids(struct mii_bus *bus, int addr, |
| 907 |
struct phy_c45_device_ids *c45_ids) |
| 908 |
{ |
| 909 |
const int num_ids = ARRAY_SIZE(c45_ids->device_ids); |
| 910 |
u32 devs_in_pkg = 0; |
| 911 |
int i, ret, phy_reg; |
| 912 |
|
| 913 |
/* Find first non-zero Devices In package. Device zero is reserved |
| 914 |
* for 802.3 c45 complied PHYs, so don't probe it at first. |
| 915 |
*/ |
| 916 |
for (i = 1; i < MDIO_MMD_NUM && (devs_in_pkg == 0 || |
| 917 |
(devs_in_pkg & 0x1fffffff) == 0x1fffffff); i++) { |
| 918 |
if (i == MDIO_MMD_VEND1 || i == MDIO_MMD_VEND2) { |
| 919 |
/* Check that there is a device present at this |
| 920 |
* address before reading the devices-in-package |
| 921 |
* register to avoid reading garbage from the PHY. |
| 922 |
* Some PHYs (88x3310) vendor space is not IEEE802.3 |
| 923 |
* compliant. |
| 924 |
*/ |
| 925 |
ret = phy_c45_probe_present(bus, addr, i); |
| 926 |
if (ret < 0) |
| 927 |
/* returning -ENODEV doesn't stop bus |
| 928 |
* scanning |
| 929 |
*/ |
| 930 |
return (ret == -EIO || |
| 931 |
ret == -ENODEV) ? -ENODEV : -EIO; |
| 932 |
|
| 933 |
if (!ret) |
| 934 |
continue; |
| 935 |
} |
| 936 |
phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, &devs_in_pkg); |
| 937 |
if (phy_reg < 0) |
| 938 |
return -EIO; |
| 939 |
} |
| 940 |
|
| 941 |
if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff) { |
| 942 |
/* If mostly Fs, there is no device there, then let's probe |
| 943 |
* MMD 0, as some 10G PHYs have zero Devices In package, |
| 944 |
* e.g. Cortina CS4315/CS4340 PHY. |
| 945 |
*/ |
| 946 |
phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, &devs_in_pkg); |
| 947 |
if (phy_reg < 0) |
| 948 |
return -EIO; |
| 949 |
|
| 950 |
/* no device there, let's get out of here */ |
| 951 |
if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff) |
| 952 |
return -ENODEV; |
| 953 |
} |
| 954 |
|
| 955 |
/* Now probe Device Identifiers for each device present. */ |
| 956 |
for (i = 1; i < num_ids; i++) { |
| 957 |
if (!(devs_in_pkg & (1 << i))) |
| 958 |
continue; |
| 959 |
|
| 960 |
if (i == MDIO_MMD_VEND1 || i == MDIO_MMD_VEND2) { |
| 961 |
/* Probe the "Device Present" bits for the vendor MMDs |
| 962 |
* to ignore these if they do not contain IEEE 802.3 |
| 963 |
* registers. |
| 964 |
*/ |
| 965 |
ret = phy_c45_probe_present(bus, addr, i); |
| 966 |
if (ret < 0) |
| 967 |
return ret; |
| 968 |
|
| 969 |
if (!ret) |
| 970 |
continue; |
| 971 |
} |
| 972 |
|
| 973 |
phy_reg = mdiobus_c45_read(bus, addr, i, MII_PHYSID1); |
| 974 |
if (phy_reg < 0) |
| 975 |
return -EIO; |
| 976 |
c45_ids->device_ids[i] = phy_reg << 16; |
| 977 |
|
| 978 |
phy_reg = mdiobus_c45_read(bus, addr, i, MII_PHYSID2); |
| 979 |
if (phy_reg < 0) |
| 980 |
return -EIO; |
| 981 |
c45_ids->device_ids[i] |= phy_reg; |
| 982 |
} |
| 983 |
|
| 984 |
c45_ids->devices_in_package = devs_in_pkg; |
| 985 |
/* Bit 0 doesn't represent a device, it indicates c22 regs presence */ |
| 986 |
c45_ids->mmds_present = devs_in_pkg & ~BIT(0); |
| 987 |
|
| 988 |
return 0; |
| 989 |
} |
| 990 |
|
| 991 |
/** |
| 992 |
* get_phy_c22_id - reads the specified addr for its clause 22 ID. |
| 993 |
* @bus: the target MII bus |
| 994 |
* @addr: PHY address on the MII bus |
| 995 |
* @phy_id: where to store the ID retrieved. |
| 996 |
* |
| 997 |
* Read the 802.3 clause 22 PHY ID from the PHY at @addr on the @bus, |
| 998 |
* placing it in @phy_id. Return zero on successful read and the ID is |
| 999 |
* valid, %-EIO on bus access error, or %-ENODEV if no device responds |
| 1000 |
* or invalid ID. |
| 1001 |
*/ |
| 1002 |
static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id) |
| 1003 |
{ |
| 1004 |
int phy_reg; |
| 1005 |
|
| 1006 |
/* Grab the bits from PHYIR1, and put them in the upper half */ |
| 1007 |
phy_reg = mdiobus_read(bus, addr, MII_PHYSID1); |
| 1008 |
if (phy_reg < 0) { |
| 1009 |
/* returning -ENODEV doesn't stop bus scanning */ |
| 1010 |
return (phy_reg == -EIO || phy_reg == -ENODEV) ? -ENODEV : -EIO; |
| 1011 |
} |
| 1012 |
|
| 1013 |
*phy_id = phy_reg << 16; |
| 1014 |
|
| 1015 |
/* Grab the bits from PHYIR2, and put them in the lower half */ |
| 1016 |
phy_reg = mdiobus_read(bus, addr, MII_PHYSID2); |
| 1017 |
if (phy_reg < 0) { |
| 1018 |
/* returning -ENODEV doesn't stop bus scanning */ |
| 1019 |
return (phy_reg == -EIO || phy_reg == -ENODEV) ? -ENODEV : -EIO; |
| 1020 |
} |
| 1021 |
|
| 1022 |
*phy_id |= phy_reg; |
| 1023 |
|
| 1024 |
/* If the phy_id is mostly Fs, there is no device there */ |
| 1025 |
if ((*phy_id & 0x1fffffff) == 0x1fffffff) |
| 1026 |
return -ENODEV; |
| 1027 |
|
| 1028 |
return 0; |
| 1029 |
} |
| 1030 |
|
| 1031 |
/* Extract the phy ID from the compatible string of the form |
| 1032 |
* ethernet-phy-idAAAA.BBBB. |
| 1033 |
*/ |
| 1034 |
int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id) |
| 1035 |
{ |
| 1036 |
unsigned int upper, lower; |
| 1037 |
const char *cp; |
| 1038 |
int ret; |
| 1039 |
|
| 1040 |
ret = fwnode_property_read_string(fwnode, "compatible", &cp); |
| 1041 |
if (ret) |
| 1042 |
return ret; |
| 1043 |
|
| 1044 |
if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) != 2) |
| 1045 |
return -EINVAL; |
| 1046 |
|
| 1047 |
*phy_id = ((upper & GENMASK(15, 0)) << 16) | (lower & GENMASK(15, 0)); |
| 1048 |
return 0; |
| 1049 |
} |
| 1050 |
EXPORT_SYMBOL(fwnode_get_phy_id); |
| 1051 |
|
| 1052 |
/** |
| 1053 |
* get_phy_device - reads the specified PHY device and returns its @phy_device |
| 1054 |
* struct |
| 1055 |
* @bus: the target MII bus |
| 1056 |
* @addr: PHY address on the MII bus |
| 1057 |
* @is_c45: If true the PHY uses the 802.3 clause 45 protocol |
| 1058 |
* |
| 1059 |
* Probe for a PHY at @addr on @bus. |
| 1060 |
* |
| 1061 |
* When probing for a clause 22 PHY, then read the ID registers. If we find |
| 1062 |
* a valid ID, allocate and return a &struct phy_device. |
| 1063 |
* |
| 1064 |
* When probing for a clause 45 PHY, read the "devices in package" registers. |
| 1065 |
* If the "devices in package" appears valid, read the ID registers for each |
| 1066 |
* MMD, allocate and return a &struct phy_device. |
| 1067 |
* |
| 1068 |
* Returns an allocated &struct phy_device on success, %-ENODEV if there is |
| 1069 |
* no PHY present, or %-EIO on bus access error. |
| 1070 |
*/ |
| 1071 |
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) |
| 1072 |
{ |
| 1073 |
struct phy_c45_device_ids c45_ids; |
| 1074 |
u32 phy_id = 0; |
| 1075 |
int r; |
| 1076 |
|
| 1077 |
c45_ids.devices_in_package = 0; |
| 1078 |
c45_ids.mmds_present = 0; |
| 1079 |
memset(c45_ids.device_ids, 0xff, sizeof(c45_ids.device_ids)); |
| 1080 |
|
| 1081 |
if (is_c45) |
| 1082 |
r = get_phy_c45_ids(bus, addr, &c45_ids); |
| 1083 |
else |
| 1084 |
r = get_phy_c22_id(bus, addr, &phy_id); |
| 1085 |
|
| 1086 |
if (r) |
| 1087 |
return ERR_PTR(r); |
| 1088 |
|
| 1089 |
/* PHY device such as the Marvell Alaska 88E2110 will return a PHY ID |
| 1090 |
* of 0 when probed using get_phy_c22_id() with no error. Proceed to |
| 1091 |
* probe with C45 to see if we're able to get a valid PHY ID in the C45 |
| 1092 |
* space, if successful, create the C45 PHY device. |
| 1093 |
*/ |
| 1094 |
if (!is_c45 && phy_id == 0 && bus->read_c45) { |
| 1095 |
r = get_phy_c45_ids(bus, addr, &c45_ids); |
| 1096 |
if (!r) |
| 1097 |
return phy_device_create(bus, addr, phy_id, |
| 1098 |
true, &c45_ids); |
| 1099 |
} |
| 1100 |
|
| 1101 |
return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids); |
| 1102 |
} |
| 1103 |
EXPORT_SYMBOL(get_phy_device); |
| 1104 |
|
| 1105 |
/** |
| 1106 |
* phy_device_register - Register the phy device on the MDIO bus |
| 1107 |
* @phydev: phy_device structure to be added to the MDIO bus |
| 1108 |
*/ |
| 1109 |
int phy_device_register(struct phy_device *phydev) |
| 1110 |
{ |
| 1111 |
int err; |
| 1112 |
|
| 1113 |
err = mdiobus_register_device(&phydev->mdio); |
| 1114 |
if (err) |
| 1115 |
return err; |
| 1116 |
|
| 1117 |
/* Deassert the reset signal */ |
| 1118 |
phy_device_reset(phydev, 0); |
| 1119 |
|
| 1120 |
/* Run all of the fixups for this PHY */ |
| 1121 |
err = phy_scan_fixups(phydev); |
| 1122 |
if (err) { |
| 1123 |
phydev_err(phydev, "failed to initialize\n"); |
| 1124 |
goto out; |
| 1125 |
} |
| 1126 |
|
| 1127 |
err = device_add(&phydev->mdio.dev); |
| 1128 |
if (err) { |
| 1129 |
phydev_err(phydev, "failed to add\n"); |
| 1130 |
goto out; |
| 1131 |
} |
| 1132 |
|
| 1133 |
return 0; |
| 1134 |
|
| 1135 |
out: |
| 1136 |
/* Assert the reset signal */ |
| 1137 |
phy_device_reset(phydev, 1); |
| 1138 |
|
| 1139 |
mdiobus_unregister_device(&phydev->mdio); |
| 1140 |
return err; |
| 1141 |
} |
| 1142 |
EXPORT_SYMBOL(phy_device_register); |
| 1143 |
|
| 1144 |
/** |
| 1145 |
* phy_device_remove - Remove a previously registered phy device from the MDIO bus |
| 1146 |
* @phydev: phy_device structure to remove |
| 1147 |
* |
| 1148 |
* This doesn't free the phy_device itself, it merely reverses the effects |
| 1149 |
* of phy_device_register(). Use phy_device_free() to free the device |
| 1150 |
* after calling this function. |
| 1151 |
*/ |
| 1152 |
void phy_device_remove(struct phy_device *phydev) |
| 1153 |
{ |
| 1154 |
unregister_mii_timestamper(phydev->mii_ts); |
| 1155 |
pse_control_put(phydev->psec); |
| 1156 |
|
| 1157 |
device_del(&phydev->mdio.dev); |
| 1158 |
|
| 1159 |
/* Assert the reset signal */ |
| 1160 |
phy_device_reset(phydev, 1); |
| 1161 |
|
| 1162 |
mdiobus_unregister_device(&phydev->mdio); |
| 1163 |
} |
| 1164 |
EXPORT_SYMBOL(phy_device_remove); |
| 1165 |
|
| 1166 |
/** |
| 1167 |
* phy_get_c45_ids - Read 802.3-c45 IDs for phy device. |
| 1168 |
* @phydev: phy_device structure to read 802.3-c45 IDs |
| 1169 |
* |
| 1170 |
* Returns zero on success, %-EIO on bus access error, or %-ENODEV if |
| 1171 |
* the "devices in package" is invalid. |
| 1172 |
*/ |
| 1173 |
int phy_get_c45_ids(struct phy_device *phydev) |
| 1174 |
{ |
| 1175 |
return get_phy_c45_ids(phydev->mdio.bus, phydev->mdio.addr, |
| 1176 |
&phydev->c45_ids); |
| 1177 |
} |
| 1178 |
EXPORT_SYMBOL(phy_get_c45_ids); |
| 1179 |
|
| 1180 |
/** |
| 1181 |
* phy_find_next - finds the next PHY device on the bus |
| 1182 |
* @bus: the target MII bus |
| 1183 |
* @pos: cursor |
| 1184 |
* |
| 1185 |
* Return: next phy_device on the bus, or NULL |
| 1186 |
*/ |
| 1187 |
struct phy_device *phy_find_next(struct mii_bus *bus, struct phy_device *pos) |
| 1188 |
{ |
| 1189 |
for (int addr = pos ? pos->mdio.addr + 1 : 0; |
| 1190 |
addr < PHY_MAX_ADDR; addr++) { |
| 1191 |
struct phy_device *phydev = mdiobus_get_phy(bus, addr); |
| 1192 |
|
| 1193 |
if (phydev) |
| 1194 |
return phydev; |
| 1195 |
} |
| 1196 |
return NULL; |
| 1197 |
} |
| 1198 |
EXPORT_SYMBOL_GPL(phy_find_next); |
| 1199 |
|
| 1200 |
/** |
| 1201 |
* phy_prepare_link - prepares the PHY layer to monitor link status |
| 1202 |
* @phydev: target phy_device struct |
| 1203 |
* @handler: callback function for link status change notifications |
| 1204 |
* |
| 1205 |
* Description: Tells the PHY infrastructure to handle the |
| 1206 |
* gory details on monitoring link status (whether through |
| 1207 |
* polling or an interrupt), and to call back to the |
| 1208 |
* connected device driver when the link status changes. |
| 1209 |
* If you want to monitor your own link state, don't call |
| 1210 |
* this function. |
| 1211 |
*/ |
| 1212 |
static void phy_prepare_link(struct phy_device *phydev, |
| 1213 |
void (*handler)(struct net_device *)) |
| 1214 |
{ |
| 1215 |
phydev->adjust_link = handler; |
| 1216 |
} |
| 1217 |
|
| 1218 |
/** |
| 1219 |
* phy_connect_direct - connect an ethernet device to a specific phy_device |
| 1220 |
* @dev: the network device to connect |
| 1221 |
* @phydev: the pointer to the phy device |
| 1222 |
* @handler: callback function for state change notifications |
| 1223 |
* @interface: PHY device's interface |
| 1224 |
*/ |
| 1225 |
int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, |
| 1226 |
void (*handler)(struct net_device *), |
| 1227 |
phy_interface_t interface) |
| 1228 |
{ |
| 1229 |
int rc; |
| 1230 |
|
| 1231 |
if (!dev) |
| 1232 |
return -EINVAL; |
| 1233 |
|
| 1234 |
rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface); |
| 1235 |
if (rc) |
| 1236 |
return rc; |
| 1237 |
|
| 1238 |
phy_prepare_link(phydev, handler); |
| 1239 |
if (phy_interrupt_is_valid(phydev)) |
| 1240 |
phy_request_interrupt(phydev); |
| 1241 |
|
| 1242 |
return 0; |
| 1243 |
} |
| 1244 |
EXPORT_SYMBOL(phy_connect_direct); |
| 1245 |
|
| 1246 |
/** |
| 1247 |
* phy_connect - connect an ethernet device to a PHY device |
| 1248 |
* @dev: the network device to connect |
| 1249 |
* @bus_id: the id string of the PHY device to connect |
| 1250 |
* @handler: callback function for state change notifications |
| 1251 |
* @interface: PHY device's interface |
| 1252 |
* |
| 1253 |
* Description: Convenience function for connecting ethernet |
| 1254 |
* devices to PHY devices. The default behavior is for |
| 1255 |
* the PHY infrastructure to handle everything, and only notify |
| 1256 |
* the connected driver when the link status changes. If you |
| 1257 |
* don't want, or can't use the provided functionality, you may |
| 1258 |
* choose to call only the subset of functions which provide |
| 1259 |
* the desired functionality. |
| 1260 |
*/ |
| 1261 |
struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, |
| 1262 |
void (*handler)(struct net_device *), |
| 1263 |
phy_interface_t interface) |
| 1264 |
{ |
| 1265 |
struct phy_device *phydev; |
| 1266 |
struct device *d; |
| 1267 |
int rc; |
| 1268 |
|
| 1269 |
/* Search the list of PHY devices on the mdio bus for the |
| 1270 |
* PHY with the requested name |
| 1271 |
*/ |
| 1272 |
d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id); |
| 1273 |
if (!d) { |
| 1274 |
pr_err("PHY %s not found\n", bus_id); |
| 1275 |
return ERR_PTR(-ENODEV); |
| 1276 |
} |
| 1277 |
phydev = to_phy_device(d); |
| 1278 |
|
| 1279 |
rc = phy_connect_direct(dev, phydev, handler, interface); |
| 1280 |
put_device(d); |
| 1281 |
if (rc) |
| 1282 |
return ERR_PTR(rc); |
| 1283 |
|
| 1284 |
return phydev; |
| 1285 |
} |
| 1286 |
EXPORT_SYMBOL(phy_connect); |
| 1287 |
|
| 1288 |
/** |
| 1289 |
* phy_disconnect - disable interrupts, stop state machine, and detach a PHY |
| 1290 |
* device |
| 1291 |
* @phydev: target phy_device struct |
| 1292 |
*/ |
| 1293 |
void phy_disconnect(struct phy_device *phydev) |
| 1294 |
{ |
| 1295 |
if (phy_is_started(phydev)) |
| 1296 |
phy_stop(phydev); |
| 1297 |
|
| 1298 |
if (phy_interrupt_is_valid(phydev)) |
| 1299 |
phy_free_interrupt(phydev); |
| 1300 |
|
| 1301 |
phydev->adjust_link = NULL; |
| 1302 |
|
| 1303 |
phy_detach(phydev); |
| 1304 |
} |
| 1305 |
EXPORT_SYMBOL(phy_disconnect); |
| 1306 |
|
| 1307 |
/** |
| 1308 |
* phy_poll_reset - Safely wait until a PHY reset has properly completed |
| 1309 |
* @phydev: The PHY device to poll |
| 1310 |
* |
| 1311 |
* Description: According to IEEE 802.3, Section 2, Subsection 22.2.4.1.1, as |
| 1312 |
* published in 2008, a PHY reset may take up to 0.5 seconds. The MII BMCR |
| 1313 |
* register must be polled until the BMCR_RESET bit clears. |
| 1314 |
* |
| 1315 |
* Furthermore, any attempts to write to PHY registers may have no effect |
| 1316 |
* or even generate MDIO bus errors until this is complete. |
| 1317 |
* |
| 1318 |
* Some PHYs (such as the Marvell 88E1111) don't entirely conform to the |
| 1319 |
* standard and do not fully reset after the BMCR_RESET bit is set, and may |
| 1320 |
* even *REQUIRE* a soft-reset to properly restart autonegotiation. In an |
| 1321 |
* effort to support such broken PHYs, this function is separate from the |
| 1322 |
* standard phy_init_hw() which will zero all the other bits in the BMCR |
| 1323 |
* and reapply all driver-specific and board-specific fixups. |
| 1324 |
*/ |
| 1325 |
static int phy_poll_reset(struct phy_device *phydev) |
| 1326 |
{ |
| 1327 |
/* Poll until the reset bit clears (50ms per retry == 0.6 sec) */ |
| 1328 |
int ret, val; |
| 1329 |
|
| 1330 |
ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET), |
| 1331 |
50000, 600000, true); |
| 1332 |
if (ret) |
| 1333 |
return ret; |
| 1334 |
/* Some chips (smsc911x) may still need up to another 1ms after the |
| 1335 |
* BMCR_RESET bit is cleared before they are usable. |
| 1336 |
*/ |
| 1337 |
msleep(1); |
| 1338 |
return 0; |
| 1339 |
} |
| 1340 |
|
| 1341 |
int phy_init_hw(struct phy_device *phydev) |
| 1342 |
{ |
| 1343 |
int ret = 0; |
| 1344 |
|
| 1345 |
/* Deassert the reset signal */ |
| 1346 |
phy_device_reset(phydev, 0); |
| 1347 |
|
| 1348 |
if (!phydev->drv) |
| 1349 |
return 0; |
| 1350 |
|
| 1351 |
if (phydev->drv->soft_reset) { |
| 1352 |
ret = phydev->drv->soft_reset(phydev); |
| 1353 |
if (ret < 0) |
| 1354 |
return ret; |
| 1355 |
|
| 1356 |
/* see comment in genphy_soft_reset for an explanation */ |
| 1357 |
phydev->suspended = 0; |
| 1358 |
} |
| 1359 |
|
| 1360 |
ret = phy_scan_fixups(phydev); |
| 1361 |
if (ret < 0) |
| 1362 |
return ret; |
| 1363 |
|
| 1364 |
phy_interface_zero(phydev->possible_interfaces); |
| 1365 |
|
| 1366 |
if (phydev->drv->config_init) { |
| 1367 |
ret = phydev->drv->config_init(phydev); |
| 1368 |
if (ret < 0) |
| 1369 |
return ret; |
| 1370 |
} |
| 1371 |
|
| 1372 |
if (phydev->drv->config_intr) { |
| 1373 |
ret = phydev->drv->config_intr(phydev); |
| 1374 |
if (ret < 0) |
| 1375 |
return ret; |
| 1376 |
} |
| 1377 |
|
| 1378 |
return 0; |
| 1379 |
} |
| 1380 |
EXPORT_SYMBOL(phy_init_hw); |
| 1381 |
|
| 1382 |
void phy_attached_info(struct phy_device *phydev) |
| 1383 |
{ |
| 1384 |
phy_attached_print(phydev, NULL); |
| 1385 |
} |
| 1386 |
EXPORT_SYMBOL(phy_attached_info); |
| 1387 |
|
| 1388 |
#define ATTACHED_FMT "attached PHY driver %s(mii_bus:phy_addr=%s, irq=%s)" |
| 1389 |
char *phy_attached_info_irq(struct phy_device *phydev) |
| 1390 |
{ |
| 1391 |
char *irq_str; |
| 1392 |
char irq_num[8]; |
| 1393 |
|
| 1394 |
switch(phydev->irq) { |
| 1395 |
case PHY_POLL: |
| 1396 |
irq_str = "POLL"; |
| 1397 |
break; |
| 1398 |
case PHY_MAC_INTERRUPT: |
| 1399 |
irq_str = "MAC"; |
| 1400 |
break; |
| 1401 |
default: |
| 1402 |
snprintf(irq_num, sizeof(irq_num), "%d", phydev->irq); |
| 1403 |
irq_str = irq_num; |
| 1404 |
break; |
| 1405 |
} |
| 1406 |
|
| 1407 |
return kasprintf(GFP_KERNEL, "%s", irq_str); |
| 1408 |
} |
| 1409 |
EXPORT_SYMBOL(phy_attached_info_irq); |
| 1410 |
|
| 1411 |
void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) |
| 1412 |
{ |
| 1413 |
const char *unbound = phydev->drv ? "" : "[unbound] "; |
| 1414 |
char *irq_str = phy_attached_info_irq(phydev); |
| 1415 |
|
| 1416 |
if (!fmt) { |
| 1417 |
phydev_info(phydev, ATTACHED_FMT "\n", unbound, |
| 1418 |
phydev_name(phydev), irq_str); |
| 1419 |
} else { |
| 1420 |
va_list ap; |
| 1421 |
|
| 1422 |
phydev_info(phydev, ATTACHED_FMT, unbound, |
| 1423 |
phydev_name(phydev), irq_str); |
| 1424 |
|
| 1425 |
va_start(ap, fmt); |
| 1426 |
vprintk(fmt, ap); |
| 1427 |
va_end(ap); |
| 1428 |
} |
| 1429 |
kfree(irq_str); |
| 1430 |
} |
| 1431 |
EXPORT_SYMBOL(phy_attached_print); |
| 1432 |
|
| 1433 |
static void phy_sysfs_create_links(struct phy_device *phydev) |
| 1434 |
{ |
| 1435 |
struct net_device *dev = phydev->attached_dev; |
| 1436 |
int err; |
| 1437 |
|
| 1438 |
if (!dev) |
| 1439 |
return; |
| 1440 |
|
| 1441 |
err = sysfs_create_link(&phydev->mdio.dev.kobj, &dev->dev.kobj, |
| 1442 |
"attached_dev"); |
| 1443 |
if (err) |
| 1444 |
return; |
| 1445 |
|
| 1446 |
err = sysfs_create_link_nowarn(&dev->dev.kobj, |
| 1447 |
&phydev->mdio.dev.kobj, |
| 1448 |
"phydev"); |
| 1449 |
if (err) { |
| 1450 |
dev_err(&dev->dev, "could not add device link to %s err %d\n", |
| 1451 |
kobject_name(&phydev->mdio.dev.kobj), |
| 1452 |
err); |
| 1453 |
/* non-fatal - some net drivers can use one netdevice |
| 1454 |
* with more then one phy |
| 1455 |
*/ |
| 1456 |
} |
| 1457 |
|
| 1458 |
phydev->sysfs_links = true; |
| 1459 |
} |
| 1460 |
|
| 1461 |
static ssize_t |
| 1462 |
phy_standalone_show(struct device *dev, struct device_attribute *attr, |
| 1463 |
char *buf) |
| 1464 |
{ |
| 1465 |
struct phy_device *phydev = to_phy_device(dev); |
| 1466 |
|
| 1467 |
return sysfs_emit(buf, "%d\n", !phydev->attached_dev); |
| 1468 |
} |
| 1469 |
static DEVICE_ATTR_RO(phy_standalone); |
| 1470 |
|
| 1471 |
/** |
| 1472 |
* phy_sfp_connect_phy - Connect the SFP module's PHY to the upstream PHY |
| 1473 |
* @upstream: pointer to the upstream phy device |
| 1474 |
* @phy: pointer to the SFP module's phy device |
| 1475 |
* |
| 1476 |
* This helper allows keeping track of PHY devices on the link. It adds the |
| 1477 |
* SFP module's phy to the phy namespace of the upstream phy |
| 1478 |
* |
| 1479 |
* Return: 0 on success, otherwise a negative error code. |
| 1480 |
*/ |
| 1481 |
static int phy_sfp_connect_phy(void *upstream, struct phy_device *phy) |
| 1482 |
{ |
| 1483 |
struct phy_device *phydev = upstream; |
| 1484 |
struct net_device *dev = phydev->attached_dev; |
| 1485 |
|
| 1486 |
if (dev) |
| 1487 |
return phy_link_topo_add_phy(dev, phy, PHY_UPSTREAM_PHY, phydev); |
| 1488 |
|
| 1489 |
return 0; |
| 1490 |
} |
| 1491 |
|
| 1492 |
/** |
| 1493 |
* phy_sfp_disconnect_phy - Disconnect the SFP module's PHY from the upstream PHY |
| 1494 |
* @upstream: pointer to the upstream phy device |
| 1495 |
* @phy: pointer to the SFP module's phy device |
| 1496 |
* |
| 1497 |
* This helper allows keeping track of PHY devices on the link. It removes the |
| 1498 |
* SFP module's phy to the phy namespace of the upstream phy. As the module phy |
| 1499 |
* will be destroyed, re-inserting the same module will add a new phy with a |
| 1500 |
* new index. |
| 1501 |
*/ |
| 1502 |
static void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy) |
| 1503 |
{ |
| 1504 |
struct phy_device *phydev = upstream; |
| 1505 |
struct net_device *dev = phydev->attached_dev; |
| 1506 |
|
| 1507 |
if (dev) |
| 1508 |
phy_link_topo_del_phy(dev, phy); |
| 1509 |
} |
| 1510 |
|
| 1511 |
/** |
| 1512 |
* phy_sfp_attach - attach the SFP bus to the PHY upstream network device |
| 1513 |
* @upstream: pointer to the phy device |
| 1514 |
* @bus: sfp bus representing cage being attached |
| 1515 |
* |
| 1516 |
* This is used to fill in the sfp_upstream_ops .attach member. |
| 1517 |
*/ |
| 1518 |
static void phy_sfp_attach(void *upstream, struct sfp_bus *bus) |
| 1519 |
{ |
| 1520 |
struct phy_device *phydev = upstream; |
| 1521 |
|
| 1522 |
if (phydev->attached_dev) |
| 1523 |
phydev->attached_dev->sfp_bus = bus; |
| 1524 |
phydev->sfp_bus_attached = true; |
| 1525 |
} |
| 1526 |
|
| 1527 |
/** |
| 1528 |
* phy_sfp_detach - detach the SFP bus from the PHY upstream network device |
| 1529 |
* @upstream: pointer to the phy device |
| 1530 |
* @bus: sfp bus representing cage being attached |
| 1531 |
* |
| 1532 |
* This is used to fill in the sfp_upstream_ops .detach member. |
| 1533 |
*/ |
| 1534 |
static void phy_sfp_detach(void *upstream, struct sfp_bus *bus) |
| 1535 |
{ |
| 1536 |
struct phy_device *phydev = upstream; |
| 1537 |
|
| 1538 |
if (phydev->attached_dev) |
| 1539 |
phydev->attached_dev->sfp_bus = NULL; |
| 1540 |
phydev->sfp_bus_attached = false; |
| 1541 |
} |
| 1542 |
|
| 1543 |
static int phy_sfp_module_insert(void *upstream, const struct sfp_eeprom_id *id) |
| 1544 |
{ |
| 1545 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); |
| 1546 |
struct phy_device *phydev = upstream; |
| 1547 |
const struct sfp_module_caps *caps; |
| 1548 |
struct phy_port *port; |
| 1549 |
|
| 1550 |
phy_interface_t iface; |
| 1551 |
|
| 1552 |
linkmode_zero(sfp_support); |
| 1553 |
|
| 1554 |
port = phy_get_sfp_port(phydev); |
| 1555 |
if (!port) |
| 1556 |
return -EINVAL; |
| 1557 |
|
| 1558 |
caps = sfp_get_module_caps(phydev->sfp_bus); |
| 1559 |
|
| 1560 |
linkmode_and(sfp_support, port->supported, caps->link_modes); |
| 1561 |
if (linkmode_empty(sfp_support)) { |
| 1562 |
dev_err(&phydev->mdio.dev, "incompatible SFP module inserted, no common linkmode\n"); |
| 1563 |
return -EINVAL; |
| 1564 |
} |
| 1565 |
|
| 1566 |
iface = sfp_select_interface(phydev->sfp_bus, sfp_support); |
| 1567 |
if (iface == PHY_INTERFACE_MODE_NA) { |
| 1568 |
dev_err(&phydev->mdio.dev, "PHY %s does not support the SFP module's requested MII interfaces\n", |
| 1569 |
phydev_name(phydev)); |
| 1570 |
return -EINVAL; |
| 1571 |
} |
| 1572 |
|
| 1573 |
if (phydev->n_ports == 1) |
| 1574 |
phydev->port = caps->port; |
| 1575 |
|
| 1576 |
if (port->ops && port->ops->configure_mii) |
| 1577 |
return port->ops->configure_mii(port, true, iface); |
| 1578 |
|
| 1579 |
return 0; |
| 1580 |
} |
| 1581 |
|
| 1582 |
static void phy_sfp_module_remove(void *upstream) |
| 1583 |
{ |
| 1584 |
struct phy_device *phydev = upstream; |
| 1585 |
struct phy_port *port = phy_get_sfp_port(phydev); |
| 1586 |
|
| 1587 |
if (port && port->ops && port->ops->configure_mii) |
| 1588 |
port->ops->configure_mii(port, false, PHY_INTERFACE_MODE_NA); |
| 1589 |
|
| 1590 |
if (phydev->n_ports == 1) |
| 1591 |
phydev->port = PORT_NONE; |
| 1592 |
} |
| 1593 |
|
| 1594 |
static void phy_sfp_link_up(void *upstream) |
| 1595 |
{ |
| 1596 |
struct phy_device *phydev = upstream; |
| 1597 |
struct phy_port *port = phy_get_sfp_port(phydev); |
| 1598 |
|
| 1599 |
if (port && port->ops && port->ops->link_up) |
| 1600 |
port->ops->link_up(port); |
| 1601 |
} |
| 1602 |
|
| 1603 |
static void phy_sfp_link_down(void *upstream) |
| 1604 |
{ |
| 1605 |
struct phy_device *phydev = upstream; |
| 1606 |
struct phy_port *port = phy_get_sfp_port(phydev); |
| 1607 |
|
| 1608 |
if (port && port->ops && port->ops->link_down) |
| 1609 |
port->ops->link_down(port); |
| 1610 |
} |
| 1611 |
|
| 1612 |
static const struct sfp_upstream_ops sfp_phydev_ops = { |
| 1613 |
.attach = phy_sfp_attach, |
| 1614 |
.detach = phy_sfp_detach, |
| 1615 |
.module_insert = phy_sfp_module_insert, |
| 1616 |
.module_remove = phy_sfp_module_remove, |
| 1617 |
.link_up = phy_sfp_link_up, |
| 1618 |
.link_down = phy_sfp_link_down, |
| 1619 |
.connect_phy = phy_sfp_connect_phy, |
| 1620 |
.disconnect_phy = phy_sfp_disconnect_phy, |
| 1621 |
}; |
| 1622 |
|
| 1623 |
static int phy_add_port(struct phy_device *phydev, struct phy_port *port) |
| 1624 |
{ |
| 1625 |
int ret = 0; |
| 1626 |
|
| 1627 |
if (phydev->n_ports == phydev->max_n_ports) |
| 1628 |
return -EBUSY; |
| 1629 |
|
| 1630 |
/* We set all ports as active by default, PHY drivers may deactivate |
| 1631 |
* them (when unused) |
| 1632 |
*/ |
| 1633 |
port->active = true; |
| 1634 |
|
| 1635 |
if (port->is_mii) { |
| 1636 |
if (phydev->drv && phydev->drv->attach_mii_port) |
| 1637 |
ret = phydev->drv->attach_mii_port(phydev, port); |
| 1638 |
} else { |
| 1639 |
if (phydev->drv && phydev->drv->attach_mdi_port) |
| 1640 |
ret = phydev->drv->attach_mdi_port(phydev, port); |
| 1641 |
} |
| 1642 |
|
| 1643 |
if (ret) |
| 1644 |
return ret; |
| 1645 |
|
| 1646 |
/* The PHY driver might have added, removed or set medium/pairs info, |
| 1647 |
* so update the port supported accordingly. |
| 1648 |
*/ |
| 1649 |
phy_port_update_supported(port); |
| 1650 |
|
| 1651 |
list_add(&port->head, &phydev->ports); |
| 1652 |
|
| 1653 |
phydev->n_ports++; |
| 1654 |
|
| 1655 |
return 0; |
| 1656 |
} |
| 1657 |
|
| 1658 |
static void phy_del_port(struct phy_device *phydev, struct phy_port *port) |
| 1659 |
{ |
| 1660 |
if (!phydev->n_ports) |
| 1661 |
return; |
| 1662 |
|
| 1663 |
list_del(&port->head); |
| 1664 |
|
| 1665 |
phydev->n_ports--; |
| 1666 |
} |
| 1667 |
|
| 1668 |
static int phy_setup_sfp_port(struct phy_device *phydev) |
| 1669 |
{ |
| 1670 |
struct phy_port *port = phy_port_alloc(); |
| 1671 |
int ret; |
| 1672 |
|
| 1673 |
if (!port) |
| 1674 |
return -ENOMEM; |
| 1675 |
|
| 1676 |
port->parent_type = PHY_PORT_PHY; |
| 1677 |
port->phy = phydev; |
| 1678 |
|
| 1679 |
/* The PHY is a media converter, the port connected to the SFP cage |
| 1680 |
* is a MII port. |
| 1681 |
*/ |
| 1682 |
port->is_mii = true; |
| 1683 |
port->is_sfp = true; |
| 1684 |
|
| 1685 |
/* The port->supported and port->interfaces list will be populated |
| 1686 |
* when attaching the port to the phydev. |
| 1687 |
*/ |
| 1688 |
ret = phy_add_port(phydev, port); |
| 1689 |
if (ret) |
| 1690 |
phy_port_destroy(port); |
| 1691 |
|
| 1692 |
return ret; |
| 1693 |
} |
| 1694 |
|
| 1695 |
/** |
| 1696 |
* phy_sfp_probe - probe for a SFP cage attached to this PHY device |
| 1697 |
* @phydev: Pointer to phy_device |
| 1698 |
*/ |
| 1699 |
static int phy_sfp_probe(struct phy_device *phydev) |
| 1700 |
{ |
| 1701 |
struct sfp_bus *bus; |
| 1702 |
int ret = 0; |
| 1703 |
|
| 1704 |
if (phydev->mdio.dev.fwnode) { |
| 1705 |
bus = sfp_bus_find_fwnode(phydev->mdio.dev.fwnode); |
| 1706 |
if (IS_ERR(bus)) |
| 1707 |
return PTR_ERR(bus); |
| 1708 |
|
| 1709 |
phydev->sfp_bus = bus; |
| 1710 |
|
| 1711 |
ret = sfp_bus_add_upstream(bus, phydev, &sfp_phydev_ops); |
| 1712 |
sfp_bus_put(bus); |
| 1713 |
} |
| 1714 |
|
| 1715 |
if (!ret && phydev->sfp_bus) |
| 1716 |
ret = phy_setup_sfp_port(phydev); |
| 1717 |
|
| 1718 |
return ret; |
| 1719 |
} |
| 1720 |
|
| 1721 |
static bool phy_drv_supports_irq(const struct phy_driver *phydrv) |
| 1722 |
{ |
| 1723 |
return phydrv->config_intr && phydrv->handle_interrupt; |
| 1724 |
} |
| 1725 |
|
| 1726 |
/** |
| 1727 |
* phy_attach_direct - attach a network device to a given PHY device pointer |
| 1728 |
* @dev: network device to attach |
| 1729 |
* @phydev: Pointer to phy_device to attach |
| 1730 |
* @flags: PHY device's dev_flags |
| 1731 |
* @interface: PHY device's interface |
| 1732 |
* |
| 1733 |
* Description: Called by drivers to attach to a particular PHY |
| 1734 |
* device. The phy_device is found, and properly hooked up |
| 1735 |
* to the phy_driver. If no driver is attached, then a |
| 1736 |
* generic driver is used. The phy_device is given a ptr to |
| 1737 |
* the attaching device, and given a callback for link status |
| 1738 |
* change. The phy_device is returned to the attaching driver. |
| 1739 |
* This function takes a reference on the phy device. |
| 1740 |
*/ |
| 1741 |
int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, |
| 1742 |
u32 flags, phy_interface_t interface) |
| 1743 |
{ |
| 1744 |
struct mii_bus *bus = phydev->mdio.bus; |
| 1745 |
struct device *d = &phydev->mdio.dev; |
| 1746 |
struct module *ndev_owner = NULL; |
| 1747 |
int err; |
| 1748 |
|
| 1749 |
/* For Ethernet device drivers that register their own MDIO bus, we |
| 1750 |
* will have bus->owner match ndev_mod, so we do not want to increment |
| 1751 |
* our own module->refcnt here, otherwise we would not be able to |
| 1752 |
* unload later on. |
| 1753 |
*/ |
| 1754 |
if (dev) |
| 1755 |
ndev_owner = dev->dev.parent->driver->owner; |
| 1756 |
if (ndev_owner != bus->owner && !try_module_get(bus->owner)) { |
| 1757 |
phydev_err(phydev, "failed to get the bus module\n"); |
| 1758 |
return -EIO; |
| 1759 |
} |
| 1760 |
|
| 1761 |
get_device(d); |
| 1762 |
|
| 1763 |
/* Assume that if there is no driver, that it doesn't |
| 1764 |
* exist, and we should use the genphy driver. |
| 1765 |
*/ |
| 1766 |
if (!d->driver) { |
| 1767 |
if (phydev->is_c45) |
| 1768 |
d->driver = &genphy_c45_driver.mdiodrv.driver; |
| 1769 |
else |
| 1770 |
d->driver = &genphy_driver.mdiodrv.driver; |
| 1771 |
|
| 1772 |
phydev->is_genphy_driven = 1; |
| 1773 |
} |
| 1774 |
|
| 1775 |
if (!try_module_get(d->driver->owner)) { |
| 1776 |
phydev_err(phydev, "failed to get the device driver module\n"); |
| 1777 |
err = -EIO; |
| 1778 |
goto error_put_device; |
| 1779 |
} |
| 1780 |
|
| 1781 |
if (phydev->is_genphy_driven) { |
| 1782 |
err = d->driver->probe(d); |
| 1783 |
if (err >= 0) |
| 1784 |
err = device_bind_driver(d); |
| 1785 |
|
| 1786 |
if (err) |
| 1787 |
goto error_module_put; |
| 1788 |
} |
| 1789 |
|
| 1790 |
if (phydev->attached_dev) { |
| 1791 |
dev_err(&dev->dev, "PHY already attached\n"); |
| 1792 |
err = -EBUSY; |
| 1793 |
goto error; |
| 1794 |
} |
| 1795 |
|
| 1796 |
phydev->phy_link_change = phy_link_change; |
| 1797 |
if (dev) { |
| 1798 |
phydev->attached_dev = dev; |
| 1799 |
dev->phydev = phydev; |
| 1800 |
|
| 1801 |
if (phydev->sfp_bus_attached) |
| 1802 |
dev->sfp_bus = phydev->sfp_bus; |
| 1803 |
|
| 1804 |
err = phy_link_topo_add_phy(dev, phydev, PHY_UPSTREAM_MAC, dev); |
| 1805 |
if (err) |
| 1806 |
goto error; |
| 1807 |
} |
| 1808 |
|
| 1809 |
/* Some Ethernet drivers try to connect to a PHY device before |
| 1810 |
* calling register_netdevice() -> netdev_register_kobject() and |
| 1811 |
* does the dev->dev.kobj initialization. Here we only check for |
| 1812 |
* success which indicates that the network device kobject is |
| 1813 |
* ready. Once we do that we still need to keep track of whether |
| 1814 |
* links were successfully set up or not for phy_detach() to |
| 1815 |
* remove them accordingly. |
| 1816 |
*/ |
| 1817 |
phydev->sysfs_links = false; |
| 1818 |
|
| 1819 |
phy_sysfs_create_links(phydev); |
| 1820 |
|
| 1821 |
if (!phydev->attached_dev) { |
| 1822 |
err = sysfs_create_file(&phydev->mdio.dev.kobj, |
| 1823 |
&dev_attr_phy_standalone.attr); |
| 1824 |
if (err) |
| 1825 |
phydev_err(phydev, "error creating 'phy_standalone' sysfs entry\n"); |
| 1826 |
} |
| 1827 |
|
| 1828 |
phydev->dev_flags |= flags; |
| 1829 |
|
| 1830 |
phydev->interface = interface; |
| 1831 |
|
| 1832 |
phydev->state = PHY_READY; |
| 1833 |
|
| 1834 |
phydev->interrupts = PHY_INTERRUPT_DISABLED; |
| 1835 |
|
| 1836 |
/* PHYs can request to use poll mode even though they have an |
| 1837 |
* associated interrupt line. This could be the case if they |
| 1838 |
* detect a broken interrupt handling. |
| 1839 |
*/ |
| 1840 |
if (phydev->dev_flags & PHY_F_NO_IRQ) |
| 1841 |
phydev->irq = PHY_POLL; |
| 1842 |
|
| 1843 |
if (!phy_drv_supports_irq(phydev->drv) && phy_interrupt_is_valid(phydev)) |
| 1844 |
phydev->irq = PHY_POLL; |
| 1845 |
|
| 1846 |
/* Port is set to PORT_TP by default and the actual PHY driver will set |
| 1847 |
* it to different value depending on the PHY configuration. If we have |
| 1848 |
* the generic PHY driver we can't figure it out, thus set the old |
| 1849 |
* legacy PORT_MII value. |
| 1850 |
*/ |
| 1851 |
if (phydev->is_genphy_driven) |
| 1852 |
phydev->port = PORT_MII; |
| 1853 |
|
| 1854 |
/* Initial carrier state is off as the phy is about to be |
| 1855 |
* (re)initialized. |
| 1856 |
*/ |
| 1857 |
if (dev) |
| 1858 |
netif_carrier_off(phydev->attached_dev); |
| 1859 |
|
| 1860 |
/* Do initial configuration here, now that |
| 1861 |
* we have certain key parameters |
| 1862 |
* (dev_flags and interface) |
| 1863 |
*/ |
| 1864 |
err = phy_init_hw(phydev); |
| 1865 |
if (err) |
| 1866 |
goto error; |
| 1867 |
|
| 1868 |
phy_resume(phydev); |
| 1869 |
|
| 1870 |
/** |
| 1871 |
* If the external phy used by current mac interface is managed by |
| 1872 |
* another mac interface, so we should create a device link between |
| 1873 |
* phy dev and mac dev. |
| 1874 |
*/ |
| 1875 |
if (dev && phydev->mdio.bus->parent && dev->dev.parent != phydev->mdio.bus->parent) |
| 1876 |
phydev->devlink = device_link_add(dev->dev.parent, &phydev->mdio.dev, |
| 1877 |
DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS); |
| 1878 |
|
| 1879 |
return err; |
| 1880 |
|
| 1881 |
error: |
| 1882 |
/* phy_detach() does all of the cleanup below */ |
| 1883 |
phy_detach(phydev); |
| 1884 |
return err; |
| 1885 |
|
| 1886 |
error_module_put: |
| 1887 |
module_put(d->driver->owner); |
| 1888 |
phydev->is_genphy_driven = 0; |
| 1889 |
d->driver = NULL; |
| 1890 |
error_put_device: |
| 1891 |
put_device(d); |
| 1892 |
if (ndev_owner != bus->owner) |
| 1893 |
module_put(bus->owner); |
| 1894 |
return err; |
| 1895 |
} |
| 1896 |
EXPORT_SYMBOL(phy_attach_direct); |
| 1897 |
|
| 1898 |
/** |
| 1899 |
* phy_attach - attach a network device to a particular PHY device |
| 1900 |
* @dev: network device to attach |
| 1901 |
* @bus_id: Bus ID of PHY device to attach |
| 1902 |
* @interface: PHY device's interface |
| 1903 |
* |
| 1904 |
* Description: Same as phy_attach_direct() except that a PHY bus_id |
| 1905 |
* string is passed instead of a pointer to a struct phy_device. |
| 1906 |
*/ |
| 1907 |
struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, |
| 1908 |
phy_interface_t interface) |
| 1909 |
{ |
| 1910 |
struct phy_device *phydev; |
| 1911 |
struct device *d; |
| 1912 |
int rc; |
| 1913 |
|
| 1914 |
if (!dev) |
| 1915 |
return ERR_PTR(-EINVAL); |
| 1916 |
|
| 1917 |
/* Search the list of PHY devices on the mdio bus for the |
| 1918 |
* PHY with the requested name |
| 1919 |
*/ |
| 1920 |
d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id); |
| 1921 |
if (!d) { |
| 1922 |
pr_err("PHY %s not found\n", bus_id); |
| 1923 |
return ERR_PTR(-ENODEV); |
| 1924 |
} |
| 1925 |
phydev = to_phy_device(d); |
| 1926 |
|
| 1927 |
rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface); |
| 1928 |
put_device(d); |
| 1929 |
if (rc) |
| 1930 |
return ERR_PTR(rc); |
| 1931 |
|
| 1932 |
return phydev; |
| 1933 |
} |
| 1934 |
EXPORT_SYMBOL(phy_attach); |
| 1935 |
|
| 1936 |
/** |
| 1937 |
* phy_detach - detach a PHY device from its network device |
| 1938 |
* @phydev: target phy_device struct |
| 1939 |
* |
| 1940 |
* This detaches the phy device from its network device and the phy |
| 1941 |
* driver, and drops the reference count taken in phy_attach_direct(). |
| 1942 |
*/ |
| 1943 |
void phy_detach(struct phy_device *phydev) |
| 1944 |
{ |
| 1945 |
struct net_device *dev = phydev->attached_dev; |
| 1946 |
struct module *ndev_owner = NULL; |
| 1947 |
struct mii_bus *bus; |
| 1948 |
|
| 1949 |
if (phydev->devlink) { |
| 1950 |
device_link_del(phydev->devlink); |
| 1951 |
phydev->devlink = NULL; |
| 1952 |
} |
| 1953 |
|
| 1954 |
if (phydev->sysfs_links) { |
| 1955 |
if (dev) |
| 1956 |
sysfs_remove_link(&dev->dev.kobj, "phydev"); |
| 1957 |
sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev"); |
| 1958 |
} |
| 1959 |
|
| 1960 |
if (!phydev->attached_dev) |
| 1961 |
sysfs_remove_file(&phydev->mdio.dev.kobj, |
| 1962 |
&dev_attr_phy_standalone.attr); |
| 1963 |
|
| 1964 |
phy_suspend(phydev); |
| 1965 |
if (dev) { |
| 1966 |
struct hwtstamp_provider *hwprov; |
| 1967 |
|
| 1968 |
hwprov = rtnl_dereference(dev->hwprov); |
| 1969 |
/* Disable timestamp if it is the one selected */ |
| 1970 |
if (hwprov && hwprov->phydev == phydev) { |
| 1971 |
rcu_assign_pointer(dev->hwprov, NULL); |
| 1972 |
kfree_rcu(hwprov, rcu_head); |
| 1973 |
} |
| 1974 |
|
| 1975 |
phydev->attached_dev->phydev = NULL; |
| 1976 |
phydev->attached_dev = NULL; |
| 1977 |
phy_link_topo_del_phy(dev, phydev); |
| 1978 |
} |
| 1979 |
|
| 1980 |
phydev->phy_link_change = NULL; |
| 1981 |
phydev->phylink = NULL; |
| 1982 |
|
| 1983 |
if (phydev->mdio.dev.driver) |
| 1984 |
module_put(phydev->mdio.dev.driver->owner); |
| 1985 |
|
| 1986 |
/* If the device had no specific driver before (i.e. - it |
| 1987 |
* was using the generic driver), we unbind the device |
| 1988 |
* from the generic driver so that there's a chance a |
| 1989 |
* real driver could be loaded |
| 1990 |
*/ |
| 1991 |
if (phydev->is_genphy_driven) { |
| 1992 |
device_release_driver(&phydev->mdio.dev); |
| 1993 |
phydev->is_genphy_driven = 0; |
| 1994 |
} |
| 1995 |
|
| 1996 |
/* Assert the reset signal */ |
| 1997 |
phy_device_reset(phydev, 1); |
| 1998 |
|
| 1999 |
/* |
| 2000 |
* The phydev might go away on the put_device() below, so avoid |
| 2001 |
* a use-after-free bug by reading the underlying bus first. |
| 2002 |
*/ |
| 2003 |
bus = phydev->mdio.bus; |
| 2004 |
|
| 2005 |
put_device(&phydev->mdio.dev); |
| 2006 |
if (dev) |
| 2007 |
ndev_owner = dev->dev.parent->driver->owner; |
| 2008 |
if (ndev_owner != bus->owner) |
| 2009 |
module_put(bus->owner); |
| 2010 |
} |
| 2011 |
EXPORT_SYMBOL(phy_detach); |
| 2012 |
|
| 2013 |
int phy_suspend(struct phy_device *phydev) |
| 2014 |
{ |
| 2015 |
struct net_device *netdev = phydev->attached_dev; |
| 2016 |
const struct phy_driver *phydrv = phydev->drv; |
| 2017 |
int ret; |
| 2018 |
|
| 2019 |
if (phydev->suspended || !phydrv) |
| 2020 |
return 0; |
| 2021 |
|
| 2022 |
phydev->wol_enabled = phy_may_wakeup(phydev) || |
| 2023 |
(netdev && netdev->ethtool->wol_enabled); |
| 2024 |
/* If the device has WOL enabled, we cannot suspend the PHY */ |
| 2025 |
if (phydev->wol_enabled && !(phydrv->flags & PHY_ALWAYS_CALL_SUSPEND)) |
| 2026 |
return -EBUSY; |
| 2027 |
|
| 2028 |
if (!phydrv->suspend) |
| 2029 |
return 0; |
| 2030 |
|
| 2031 |
ret = phydrv->suspend(phydev); |
| 2032 |
if (!ret) |
| 2033 |
phydev->suspended = true; |
| 2034 |
|
| 2035 |
return ret; |
| 2036 |
} |
| 2037 |
EXPORT_SYMBOL(phy_suspend); |
| 2038 |
|
| 2039 |
int __phy_resume(struct phy_device *phydev) |
| 2040 |
{ |
| 2041 |
const struct phy_driver *phydrv = phydev->drv; |
| 2042 |
int ret; |
| 2043 |
|
| 2044 |
lockdep_assert_held(&phydev->lock); |
| 2045 |
|
| 2046 |
if (!phydrv || !phydrv->resume) |
| 2047 |
return 0; |
| 2048 |
|
| 2049 |
ret = phydrv->resume(phydev); |
| 2050 |
if (!ret) |
| 2051 |
phydev->suspended = false; |
| 2052 |
|
| 2053 |
return ret; |
| 2054 |
} |
| 2055 |
EXPORT_SYMBOL(__phy_resume); |
| 2056 |
|
| 2057 |
int phy_resume(struct phy_device *phydev) |
| 2058 |
{ |
| 2059 |
int ret; |
| 2060 |
|
| 2061 |
mutex_lock(&phydev->lock); |
| 2062 |
ret = __phy_resume(phydev); |
| 2063 |
mutex_unlock(&phydev->lock); |
| 2064 |
|
| 2065 |
return ret; |
| 2066 |
} |
| 2067 |
EXPORT_SYMBOL(phy_resume); |
| 2068 |
|
| 2069 |
/** |
| 2070 |
* phy_reset_after_clk_enable - perform a PHY reset if needed |
| 2071 |
* @phydev: target phy_device struct |
| 2072 |
* |
| 2073 |
* Description: Some PHYs are known to need a reset after their refclk was |
| 2074 |
* enabled. This function evaluates the flags and perform the reset if it's |
| 2075 |
* needed. Returns < 0 on error, 0 if the phy wasn't reset and 1 if the phy |
| 2076 |
* was reset. |
| 2077 |
*/ |
| 2078 |
int phy_reset_after_clk_enable(struct phy_device *phydev) |
| 2079 |
{ |
| 2080 |
if (!phydev || !phydev->drv) |
| 2081 |
return -ENODEV; |
| 2082 |
|
| 2083 |
if (phydev->drv->flags & PHY_RST_AFTER_CLK_EN) { |
| 2084 |
phy_device_reset(phydev, 1); |
| 2085 |
phy_device_reset(phydev, 0); |
| 2086 |
return 1; |
| 2087 |
} |
| 2088 |
|
| 2089 |
return 0; |
| 2090 |
} |
| 2091 |
EXPORT_SYMBOL(phy_reset_after_clk_enable); |
| 2092 |
|
| 2093 |
/* Generic PHY support and helper functions */ |
| 2094 |
|
| 2095 |
/** |
| 2096 |
* genphy_config_advert - sanitize and advertise auto-negotiation parameters |
| 2097 |
* @phydev: target phy_device struct |
| 2098 |
* @advert: auto-negotiation parameters to advertise |
| 2099 |
* |
| 2100 |
* Description: Writes MII_ADVERTISE with the appropriate values, |
| 2101 |
* after sanitizing the values to make sure we only advertise |
| 2102 |
* what is supported. Returns < 0 on error, 0 if the PHY's advertisement |
| 2103 |
* hasn't changed, and > 0 if it has changed. |
| 2104 |
*/ |
| 2105 |
static int genphy_config_advert(struct phy_device *phydev, |
| 2106 |
const unsigned long *advert) |
| 2107 |
{ |
| 2108 |
int err, bmsr, changed = 0; |
| 2109 |
u32 adv; |
| 2110 |
|
| 2111 |
adv = linkmode_adv_to_mii_adv_t(advert); |
| 2112 |
|
| 2113 |
/* Setup standard advertisement */ |
| 2114 |
err = phy_modify_changed(phydev, MII_ADVERTISE, |
| 2115 |
ADVERTISE_ALL | ADVERTISE_100BASE4 | |
| 2116 |
ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM, |
| 2117 |
adv); |
| 2118 |
if (err < 0) |
| 2119 |
return err; |
| 2120 |
if (err > 0) |
| 2121 |
changed = 1; |
| 2122 |
|
| 2123 |
bmsr = phy_read(phydev, MII_BMSR); |
| 2124 |
if (bmsr < 0) |
| 2125 |
return bmsr; |
| 2126 |
|
| 2127 |
/* Per 802.3-2008, Section 22.2.4.2.16 Extended status all |
| 2128 |
* 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a |
| 2129 |
* logical 1. |
| 2130 |
*/ |
| 2131 |
if (!(bmsr & BMSR_ESTATEN)) |
| 2132 |
return changed; |
| 2133 |
|
| 2134 |
adv = linkmode_adv_to_mii_ctrl1000_t(advert); |
| 2135 |
|
| 2136 |
err = phy_modify_changed(phydev, MII_CTRL1000, |
| 2137 |
ADVERTISE_1000FULL | ADVERTISE_1000HALF, |
| 2138 |
adv); |
| 2139 |
if (err < 0) |
| 2140 |
return err; |
| 2141 |
if (err > 0) |
| 2142 |
changed = 1; |
| 2143 |
|
| 2144 |
return changed; |
| 2145 |
} |
| 2146 |
|
| 2147 |
/** |
| 2148 |
* genphy_c37_config_advert - sanitize and advertise auto-negotiation parameters |
| 2149 |
* @phydev: target phy_device struct |
| 2150 |
* |
| 2151 |
* Description: Writes MII_ADVERTISE with the appropriate values, |
| 2152 |
* after sanitizing the values to make sure we only advertise |
| 2153 |
* what is supported. Returns < 0 on error, 0 if the PHY's advertisement |
| 2154 |
* hasn't changed, and > 0 if it has changed. This function is intended |
| 2155 |
* for Clause 37 1000Base-X mode. |
| 2156 |
*/ |
| 2157 |
static int genphy_c37_config_advert(struct phy_device *phydev) |
| 2158 |
{ |
| 2159 |
u16 adv = 0; |
| 2160 |
|
| 2161 |
/* Only allow advertising what this PHY supports */ |
| 2162 |
linkmode_and(phydev->advertising, phydev->advertising, |
| 2163 |
phydev->supported); |
| 2164 |
|
| 2165 |
if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, |
| 2166 |
phydev->advertising)) |
| 2167 |
adv |= ADVERTISE_1000XFULL; |
| 2168 |
if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, |
| 2169 |
phydev->advertising)) |
| 2170 |
adv |= ADVERTISE_1000XPAUSE; |
| 2171 |
if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| 2172 |
phydev->advertising)) |
| 2173 |
adv |= ADVERTISE_1000XPSE_ASYM; |
| 2174 |
|
| 2175 |
return phy_modify_changed(phydev, MII_ADVERTISE, |
| 2176 |
ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE | |
| 2177 |
ADVERTISE_1000XHALF | ADVERTISE_1000XPSE_ASYM, |
| 2178 |
adv); |
| 2179 |
} |
| 2180 |
|
| 2181 |
/** |
| 2182 |
* genphy_setup_forced - configures/forces speed/duplex from @phydev |
| 2183 |
* @phydev: target phy_device struct |
| 2184 |
* |
| 2185 |
* Description: Configures MII_BMCR to force speed/duplex |
| 2186 |
* to the values in phydev. Assumes that the values are valid. |
| 2187 |
* Please see phy_sanitize_settings(). |
| 2188 |
*/ |
| 2189 |
int genphy_setup_forced(struct phy_device *phydev) |
| 2190 |
{ |
| 2191 |
u16 ctl; |
| 2192 |
|
| 2193 |
phydev->pause = false; |
| 2194 |
phydev->asym_pause = false; |
| 2195 |
|
| 2196 |
ctl = mii_bmcr_encode_fixed(phydev->speed, phydev->duplex); |
| 2197 |
|
| 2198 |
return phy_modify(phydev, MII_BMCR, |
| 2199 |
~(BMCR_LOOPBACK | BMCR_ISOLATE | BMCR_PDOWN), ctl); |
| 2200 |
} |
| 2201 |
EXPORT_SYMBOL(genphy_setup_forced); |
| 2202 |
|
| 2203 |
static int genphy_setup_master_slave(struct phy_device *phydev) |
| 2204 |
{ |
| 2205 |
u16 ctl = 0; |
| 2206 |
|
| 2207 |
if (!phydev->is_gigabit_capable) |
| 2208 |
return 0; |
| 2209 |
|
| 2210 |
switch (phydev->master_slave_set) { |
| 2211 |
case MASTER_SLAVE_CFG_MASTER_PREFERRED: |
| 2212 |
ctl |= CTL1000_PREFER_MASTER; |
| 2213 |
break; |
| 2214 |
case MASTER_SLAVE_CFG_SLAVE_PREFERRED: |
| 2215 |
break; |
| 2216 |
case MASTER_SLAVE_CFG_MASTER_FORCE: |
| 2217 |
ctl |= CTL1000_AS_MASTER; |
| 2218 |
fallthrough; |
| 2219 |
case MASTER_SLAVE_CFG_SLAVE_FORCE: |
| 2220 |
ctl |= CTL1000_ENABLE_MASTER; |
| 2221 |
break; |
| 2222 |
case MASTER_SLAVE_CFG_UNKNOWN: |
| 2223 |
case MASTER_SLAVE_CFG_UNSUPPORTED: |
| 2224 |
return 0; |
| 2225 |
default: |
| 2226 |
phydev_warn(phydev, "Unsupported Master/Slave mode\n"); |
| 2227 |
return -EOPNOTSUPP; |
| 2228 |
} |
| 2229 |
|
| 2230 |
return phy_modify_changed(phydev, MII_CTRL1000, |
| 2231 |
(CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER | |
| 2232 |
CTL1000_PREFER_MASTER), ctl); |
| 2233 |
} |
| 2234 |
|
| 2235 |
int genphy_read_master_slave(struct phy_device *phydev) |
| 2236 |
{ |
| 2237 |
int cfg, state; |
| 2238 |
int val; |
| 2239 |
|
| 2240 |
phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN; |
| 2241 |
phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN; |
| 2242 |
|
| 2243 |
val = phy_read(phydev, MII_CTRL1000); |
| 2244 |
if (val < 0) |
| 2245 |
return val; |
| 2246 |
|
| 2247 |
if (val & CTL1000_ENABLE_MASTER) { |
| 2248 |
if (val & CTL1000_AS_MASTER) |
| 2249 |
cfg = MASTER_SLAVE_CFG_MASTER_FORCE; |
| 2250 |
else |
| 2251 |
cfg = MASTER_SLAVE_CFG_SLAVE_FORCE; |
| 2252 |
} else { |
| 2253 |
if (val & CTL1000_PREFER_MASTER) |
| 2254 |
cfg = MASTER_SLAVE_CFG_MASTER_PREFERRED; |
| 2255 |
else |
| 2256 |
cfg = MASTER_SLAVE_CFG_SLAVE_PREFERRED; |
| 2257 |
} |
| 2258 |
|
| 2259 |
val = phy_read(phydev, MII_STAT1000); |
| 2260 |
if (val < 0) |
| 2261 |
return val; |
| 2262 |
|
| 2263 |
if (val & LPA_1000MSFAIL) { |
| 2264 |
state = MASTER_SLAVE_STATE_ERR; |
| 2265 |
} else if (phydev->link) { |
| 2266 |
/* this bits are valid only for active link */ |
| 2267 |
if (val & LPA_1000MSRES) |
| 2268 |
state = MASTER_SLAVE_STATE_MASTER; |
| 2269 |
else |
| 2270 |
state = MASTER_SLAVE_STATE_SLAVE; |
| 2271 |
} else { |
| 2272 |
state = MASTER_SLAVE_STATE_UNKNOWN; |
| 2273 |
} |
| 2274 |
|
| 2275 |
phydev->master_slave_get = cfg; |
| 2276 |
phydev->master_slave_state = state; |
| 2277 |
|
| 2278 |
return 0; |
| 2279 |
} |
| 2280 |
EXPORT_SYMBOL(genphy_read_master_slave); |
| 2281 |
|
| 2282 |
/** |
| 2283 |
* genphy_restart_aneg - Enable and Restart Autonegotiation |
| 2284 |
* @phydev: target phy_device struct |
| 2285 |
*/ |
| 2286 |
int genphy_restart_aneg(struct phy_device *phydev) |
| 2287 |
{ |
| 2288 |
/* Don't isolate the PHY if we're negotiating */ |
| 2289 |
return phy_modify(phydev, MII_BMCR, BMCR_ISOLATE, |
| 2290 |
BMCR_ANENABLE | BMCR_ANRESTART); |
| 2291 |
} |
| 2292 |
EXPORT_SYMBOL(genphy_restart_aneg); |
| 2293 |
|
| 2294 |
/** |
| 2295 |
* genphy_check_and_restart_aneg - Enable and restart auto-negotiation |
| 2296 |
* @phydev: target phy_device struct |
| 2297 |
* @restart: whether aneg restart is requested |
| 2298 |
* |
| 2299 |
* Check, and restart auto-negotiation if needed. |
| 2300 |
*/ |
| 2301 |
int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart) |
| 2302 |
{ |
| 2303 |
int ret; |
| 2304 |
|
| 2305 |
if (!restart) { |
| 2306 |
/* Advertisement hasn't changed, but maybe aneg was never on to |
| 2307 |
* begin with? Or maybe phy was isolated? |
| 2308 |
*/ |
| 2309 |
ret = phy_read(phydev, MII_BMCR); |
| 2310 |
if (ret < 0) |
| 2311 |
return ret; |
| 2312 |
|
| 2313 |
if (!(ret & BMCR_ANENABLE) || (ret & BMCR_ISOLATE)) |
| 2314 |
restart = true; |
| 2315 |
} |
| 2316 |
|
| 2317 |
if (restart) |
| 2318 |
return genphy_restart_aneg(phydev); |
| 2319 |
|
| 2320 |
return 0; |
| 2321 |
} |
| 2322 |
EXPORT_SYMBOL(genphy_check_and_restart_aneg); |
| 2323 |
|
| 2324 |
/** |
| 2325 |
* __genphy_config_aneg - restart auto-negotiation or write BMCR |
| 2326 |
* @phydev: target phy_device struct |
| 2327 |
* @changed: whether autoneg is requested |
| 2328 |
* |
| 2329 |
* Description: If auto-negotiation is enabled, we configure the |
| 2330 |
* advertising, and then restart auto-negotiation. If it is not |
| 2331 |
* enabled, then we write the BMCR. |
| 2332 |
*/ |
| 2333 |
int __genphy_config_aneg(struct phy_device *phydev, bool changed) |
| 2334 |
{ |
| 2335 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(fixed_advert); |
| 2336 |
const struct link_capabilities *c; |
| 2337 |
unsigned long *advert; |
| 2338 |
int err; |
| 2339 |
|
| 2340 |
err = genphy_c45_an_config_eee_aneg(phydev); |
| 2341 |
if (err < 0) |
| 2342 |
return err; |
| 2343 |
else if (err) |
| 2344 |
changed = true; |
| 2345 |
|
| 2346 |
err = genphy_setup_master_slave(phydev); |
| 2347 |
if (err < 0) |
| 2348 |
return err; |
| 2349 |
else if (err) |
| 2350 |
changed = true; |
| 2351 |
|
| 2352 |
if (phydev->autoneg == AUTONEG_ENABLE) { |
| 2353 |
/* Only allow advertising what this PHY supports */ |
| 2354 |
linkmode_and(phydev->advertising, phydev->advertising, |
| 2355 |
phydev->supported); |
| 2356 |
advert = phydev->advertising; |
| 2357 |
} else if (phydev->speed < SPEED_1000) { |
| 2358 |
return genphy_setup_forced(phydev); |
| 2359 |
} else { |
| 2360 |
linkmode_zero(fixed_advert); |
| 2361 |
|
| 2362 |
c = phy_caps_lookup(phydev->speed, phydev->duplex, |
| 2363 |
phydev->supported, true); |
| 2364 |
if (c) |
| 2365 |
linkmode_and(fixed_advert, phydev->supported, |
| 2366 |
c->linkmodes); |
| 2367 |
|
| 2368 |
advert = fixed_advert; |
| 2369 |
} |
| 2370 |
|
| 2371 |
err = genphy_config_advert(phydev, advert); |
| 2372 |
if (err < 0) /* error */ |
| 2373 |
return err; |
| 2374 |
else if (err) |
| 2375 |
changed = true; |
| 2376 |
|
| 2377 |
return genphy_check_and_restart_aneg(phydev, changed); |
| 2378 |
} |
| 2379 |
EXPORT_SYMBOL(__genphy_config_aneg); |
| 2380 |
|
| 2381 |
/** |
| 2382 |
* genphy_c37_config_aneg - restart auto-negotiation or write BMCR |
| 2383 |
* @phydev: target phy_device struct |
| 2384 |
* |
| 2385 |
* Description: If auto-negotiation is enabled, we configure the |
| 2386 |
* advertising, and then restart auto-negotiation. If it is not |
| 2387 |
* enabled, then we write the BMCR. This function is intended |
| 2388 |
* for use with Clause 37 1000Base-X mode. |
| 2389 |
*/ |
| 2390 |
int genphy_c37_config_aneg(struct phy_device *phydev) |
| 2391 |
{ |
| 2392 |
int err, changed; |
| 2393 |
|
| 2394 |
if (phydev->autoneg != AUTONEG_ENABLE) |
| 2395 |
return genphy_setup_forced(phydev); |
| 2396 |
|
| 2397 |
err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100, |
| 2398 |
BMCR_SPEED1000); |
| 2399 |
if (err) |
| 2400 |
return err; |
| 2401 |
|
| 2402 |
changed = genphy_c37_config_advert(phydev); |
| 2403 |
if (changed < 0) /* error */ |
| 2404 |
return changed; |
| 2405 |
|
| 2406 |
if (!changed) { |
| 2407 |
/* Advertisement hasn't changed, but maybe aneg was never on to |
| 2408 |
* begin with? Or maybe phy was isolated? |
| 2409 |
*/ |
| 2410 |
int ctl = phy_read(phydev, MII_BMCR); |
| 2411 |
|
| 2412 |
if (ctl < 0) |
| 2413 |
return ctl; |
| 2414 |
|
| 2415 |
if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) |
| 2416 |
changed = 1; /* do restart aneg */ |
| 2417 |
} |
| 2418 |
|
| 2419 |
/* Only restart aneg if we are advertising something different |
| 2420 |
* than we were before. |
| 2421 |
*/ |
| 2422 |
if (changed > 0) |
| 2423 |
return genphy_restart_aneg(phydev); |
| 2424 |
|
| 2425 |
return 0; |
| 2426 |
} |
| 2427 |
EXPORT_SYMBOL(genphy_c37_config_aneg); |
| 2428 |
|
| 2429 |
/** |
| 2430 |
* genphy_aneg_done - return auto-negotiation status |
| 2431 |
* @phydev: target phy_device struct |
| 2432 |
* |
| 2433 |
* Description: Reads the status register and returns 0 either if |
| 2434 |
* auto-negotiation is incomplete, or if there was an error. |
| 2435 |
* Returns BMSR_ANEGCOMPLETE if auto-negotiation is done. |
| 2436 |
*/ |
| 2437 |
int genphy_aneg_done(struct phy_device *phydev) |
| 2438 |
{ |
| 2439 |
int retval = phy_read(phydev, MII_BMSR); |
| 2440 |
|
| 2441 |
return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE); |
| 2442 |
} |
| 2443 |
EXPORT_SYMBOL(genphy_aneg_done); |
| 2444 |
|
| 2445 |
/** |
| 2446 |
* genphy_update_link - update link status in @phydev |
| 2447 |
* @phydev: target phy_device struct |
| 2448 |
* |
| 2449 |
* Description: Update the value in phydev->link to reflect the |
| 2450 |
* current link value. In order to do this, we need to read |
| 2451 |
* the status register twice, keeping the second value. |
| 2452 |
*/ |
| 2453 |
int genphy_update_link(struct phy_device *phydev) |
| 2454 |
{ |
| 2455 |
int status = 0, bmcr; |
| 2456 |
|
| 2457 |
bmcr = phy_read(phydev, MII_BMCR); |
| 2458 |
if (bmcr < 0) |
| 2459 |
return bmcr; |
| 2460 |
|
| 2461 |
/* Autoneg is being started, therefore disregard BMSR value and |
| 2462 |
* report link as down. |
| 2463 |
*/ |
| 2464 |
if (bmcr & BMCR_ANRESTART) |
| 2465 |
goto done; |
| 2466 |
|
| 2467 |
/* The link state is latched low so that momentary link |
| 2468 |
* drops can be detected. Do not double-read the status |
| 2469 |
* in polling mode to detect such short link drops except |
| 2470 |
* if the link was already down. |
| 2471 |
*/ |
| 2472 |
if (!phy_polling_mode(phydev) || !phydev->link) { |
| 2473 |
status = phy_read(phydev, MII_BMSR); |
| 2474 |
if (status < 0) |
| 2475 |
return status; |
| 2476 |
else if (status & BMSR_LSTATUS) |
| 2477 |
goto done; |
| 2478 |
} |
| 2479 |
|
| 2480 |
/* Read link and autonegotiation status */ |
| 2481 |
status = phy_read(phydev, MII_BMSR); |
| 2482 |
if (status < 0) |
| 2483 |
return status; |
| 2484 |
done: |
| 2485 |
phydev->link = status & BMSR_LSTATUS ? 1 : 0; |
| 2486 |
phydev->autoneg_complete = status & BMSR_ANEGCOMPLETE ? 1 : 0; |
| 2487 |
|
| 2488 |
/* Consider the case that autoneg was started and "aneg complete" |
| 2489 |
* bit has been reset, but "link up" bit not yet. |
| 2490 |
*/ |
| 2491 |
if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete) |
| 2492 |
phydev->link = 0; |
| 2493 |
|
| 2494 |
return 0; |
| 2495 |
} |
| 2496 |
EXPORT_SYMBOL(genphy_update_link); |
| 2497 |
|
| 2498 |
int genphy_read_lpa(struct phy_device *phydev) |
| 2499 |
{ |
| 2500 |
int lpa, lpagb; |
| 2501 |
|
| 2502 |
if (phydev->autoneg == AUTONEG_ENABLE) { |
| 2503 |
if (!phydev->autoneg_complete) { |
| 2504 |
mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, |
| 2505 |
0); |
| 2506 |
mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0); |
| 2507 |
return 0; |
| 2508 |
} |
| 2509 |
|
| 2510 |
if (phydev->is_gigabit_capable) { |
| 2511 |
lpagb = phy_read(phydev, MII_STAT1000); |
| 2512 |
if (lpagb < 0) |
| 2513 |
return lpagb; |
| 2514 |
|
| 2515 |
if (lpagb & LPA_1000MSFAIL) { |
| 2516 |
int adv = phy_read(phydev, MII_CTRL1000); |
| 2517 |
|
| 2518 |
if (adv < 0) |
| 2519 |
return adv; |
| 2520 |
|
| 2521 |
if (adv & CTL1000_ENABLE_MASTER) |
| 2522 |
phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n"); |
| 2523 |
else |
| 2524 |
phydev_err(phydev, "Master/Slave resolution failed\n"); |
| 2525 |
return -ENOLINK; |
| 2526 |
} |
| 2527 |
|
| 2528 |
mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, |
| 2529 |
lpagb); |
| 2530 |
} |
| 2531 |
|
| 2532 |
lpa = phy_read(phydev, MII_LPA); |
| 2533 |
if (lpa < 0) |
| 2534 |
return lpa; |
| 2535 |
|
| 2536 |
mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa); |
| 2537 |
} else { |
| 2538 |
linkmode_zero(phydev->lp_advertising); |
| 2539 |
} |
| 2540 |
|
| 2541 |
return 0; |
| 2542 |
} |
| 2543 |
EXPORT_SYMBOL(genphy_read_lpa); |
| 2544 |
|
| 2545 |
/** |
| 2546 |
* genphy_read_status_fixed - read the link parameters for !aneg mode |
| 2547 |
* @phydev: target phy_device struct |
| 2548 |
* |
| 2549 |
* Read the current duplex and speed state for a PHY operating with |
| 2550 |
* autonegotiation disabled. |
| 2551 |
*/ |
| 2552 |
int genphy_read_status_fixed(struct phy_device *phydev) |
| 2553 |
{ |
| 2554 |
int bmcr = phy_read(phydev, MII_BMCR); |
| 2555 |
|
| 2556 |
if (bmcr < 0) |
| 2557 |
return bmcr; |
| 2558 |
|
| 2559 |
if (bmcr & BMCR_FULLDPLX) |
| 2560 |
phydev->duplex = DUPLEX_FULL; |
| 2561 |
else |
| 2562 |
phydev->duplex = DUPLEX_HALF; |
| 2563 |
|
| 2564 |
if (bmcr & BMCR_SPEED1000) |
| 2565 |
phydev->speed = SPEED_1000; |
| 2566 |
else if (bmcr & BMCR_SPEED100) |
| 2567 |
phydev->speed = SPEED_100; |
| 2568 |
else |
| 2569 |
phydev->speed = SPEED_10; |
| 2570 |
|
| 2571 |
return 0; |
| 2572 |
} |
| 2573 |
EXPORT_SYMBOL(genphy_read_status_fixed); |
| 2574 |
|
| 2575 |
/** |
| 2576 |
* genphy_read_status - check the link status and update current link state |
| 2577 |
* @phydev: target phy_device struct |
| 2578 |
* |
| 2579 |
* Description: Check the link, then figure out the current state |
| 2580 |
* by comparing what we advertise with what the link partner |
| 2581 |
* advertises. Start by checking the gigabit possibilities, |
| 2582 |
* then move on to 10/100. |
| 2583 |
*/ |
| 2584 |
int genphy_read_status(struct phy_device *phydev) |
| 2585 |
{ |
| 2586 |
int err, old_link = phydev->link; |
| 2587 |
|
| 2588 |
/* Update the link, but return if there was an error */ |
| 2589 |
err = genphy_update_link(phydev); |
| 2590 |
if (err) |
| 2591 |
return err; |
| 2592 |
|
| 2593 |
/* why bother the PHY if nothing can have changed */ |
| 2594 |
if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) |
| 2595 |
return 0; |
| 2596 |
|
| 2597 |
phydev->master_slave_get = MASTER_SLAVE_CFG_UNSUPPORTED; |
| 2598 |
phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED; |
| 2599 |
phydev->speed = SPEED_UNKNOWN; |
| 2600 |
phydev->duplex = DUPLEX_UNKNOWN; |
| 2601 |
phydev->pause = false; |
| 2602 |
phydev->asym_pause = false; |
| 2603 |
|
| 2604 |
if (phydev->is_gigabit_capable) { |
| 2605 |
err = genphy_read_master_slave(phydev); |
| 2606 |
if (err < 0) |
| 2607 |
return err; |
| 2608 |
} |
| 2609 |
|
| 2610 |
err = genphy_read_lpa(phydev); |
| 2611 |
if (err < 0) |
| 2612 |
return err; |
| 2613 |
|
| 2614 |
if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { |
| 2615 |
phy_resolve_aneg_linkmode(phydev); |
| 2616 |
} else if (phydev->autoneg == AUTONEG_DISABLE) { |
| 2617 |
err = genphy_read_status_fixed(phydev); |
| 2618 |
if (err < 0) |
| 2619 |
return err; |
| 2620 |
} |
| 2621 |
|
| 2622 |
return 0; |
| 2623 |
} |
| 2624 |
EXPORT_SYMBOL(genphy_read_status); |
| 2625 |
|
| 2626 |
/** |
| 2627 |
* genphy_c37_read_status - check the link status and update current link state |
| 2628 |
* @phydev: target phy_device struct |
| 2629 |
* @changed: pointer where to store if link changed |
| 2630 |
* |
| 2631 |
* Description: Check the link, then figure out the current state |
| 2632 |
* by comparing what we advertise with what the link partner |
| 2633 |
* advertises. This function is for Clause 37 1000Base-X mode. |
| 2634 |
* |
| 2635 |
* If link has changed, @changed is set to true, false otherwise. |
| 2636 |
*/ |
| 2637 |
int genphy_c37_read_status(struct phy_device *phydev, bool *changed) |
| 2638 |
{ |
| 2639 |
int lpa, err, old_link = phydev->link; |
| 2640 |
|
| 2641 |
/* Update the link, but return if there was an error */ |
| 2642 |
err = genphy_update_link(phydev); |
| 2643 |
if (err) |
| 2644 |
return err; |
| 2645 |
|
| 2646 |
/* why bother the PHY if nothing can have changed */ |
| 2647 |
if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) { |
| 2648 |
*changed = false; |
| 2649 |
return 0; |
| 2650 |
} |
| 2651 |
|
| 2652 |
/* Signal link has changed */ |
| 2653 |
*changed = true; |
| 2654 |
phydev->duplex = DUPLEX_UNKNOWN; |
| 2655 |
phydev->pause = false; |
| 2656 |
phydev->asym_pause = false; |
| 2657 |
|
| 2658 |
if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { |
| 2659 |
lpa = phy_read(phydev, MII_LPA); |
| 2660 |
if (lpa < 0) |
| 2661 |
return lpa; |
| 2662 |
|
| 2663 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 2664 |
phydev->lp_advertising, lpa & LPA_LPACK); |
| 2665 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, |
| 2666 |
phydev->lp_advertising, lpa & LPA_1000XFULL); |
| 2667 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, |
| 2668 |
phydev->lp_advertising, lpa & LPA_1000XPAUSE); |
| 2669 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| 2670 |
phydev->lp_advertising, |
| 2671 |
lpa & LPA_1000XPAUSE_ASYM); |
| 2672 |
|
| 2673 |
phy_resolve_aneg_linkmode(phydev); |
| 2674 |
} else if (phydev->autoneg == AUTONEG_DISABLE) { |
| 2675 |
int bmcr = phy_read(phydev, MII_BMCR); |
| 2676 |
|
| 2677 |
if (bmcr < 0) |
| 2678 |
return bmcr; |
| 2679 |
|
| 2680 |
if (bmcr & BMCR_FULLDPLX) |
| 2681 |
phydev->duplex = DUPLEX_FULL; |
| 2682 |
else |
| 2683 |
phydev->duplex = DUPLEX_HALF; |
| 2684 |
} |
| 2685 |
|
| 2686 |
return 0; |
| 2687 |
} |
| 2688 |
EXPORT_SYMBOL(genphy_c37_read_status); |
| 2689 |
|
| 2690 |
/** |
| 2691 |
* genphy_soft_reset - software reset the PHY via BMCR_RESET bit |
| 2692 |
* @phydev: target phy_device struct |
| 2693 |
* |
| 2694 |
* Description: Perform a software PHY reset using the standard |
| 2695 |
* BMCR_RESET bit and poll for the reset bit to be cleared. |
| 2696 |
* |
| 2697 |
* Returns: 0 on success, < 0 on failure |
| 2698 |
*/ |
| 2699 |
int genphy_soft_reset(struct phy_device *phydev) |
| 2700 |
{ |
| 2701 |
u16 res = BMCR_RESET; |
| 2702 |
int ret; |
| 2703 |
|
| 2704 |
if (phydev->autoneg == AUTONEG_ENABLE) |
| 2705 |
res |= BMCR_ANRESTART; |
| 2706 |
|
| 2707 |
ret = phy_modify(phydev, MII_BMCR, BMCR_ISOLATE, res); |
| 2708 |
if (ret < 0) |
| 2709 |
return ret; |
| 2710 |
|
| 2711 |
/* Clause 22 states that setting bit BMCR_RESET sets control registers |
| 2712 |
* to their default value. Therefore the POWER DOWN bit is supposed to |
| 2713 |
* be cleared after soft reset. |
| 2714 |
*/ |
| 2715 |
phydev->suspended = 0; |
| 2716 |
|
| 2717 |
ret = phy_poll_reset(phydev); |
| 2718 |
if (ret) |
| 2719 |
return ret; |
| 2720 |
|
| 2721 |
/* BMCR may be reset to defaults */ |
| 2722 |
if (phydev->autoneg == AUTONEG_DISABLE) |
| 2723 |
ret = genphy_setup_forced(phydev); |
| 2724 |
|
| 2725 |
return ret; |
| 2726 |
} |
| 2727 |
EXPORT_SYMBOL(genphy_soft_reset); |
| 2728 |
|
| 2729 |
irqreturn_t genphy_handle_interrupt_no_ack(struct phy_device *phydev) |
| 2730 |
{ |
| 2731 |
/* It seems there are cases where the interrupts are handled by another |
| 2732 |
* entity (ie an IRQ controller embedded inside the PHY) and do not |
| 2733 |
* need any other interraction from phylib. In this case, just trigger |
| 2734 |
* the state machine directly. |
| 2735 |
*/ |
| 2736 |
phy_trigger_machine(phydev); |
| 2737 |
|
| 2738 |
return 0; |
| 2739 |
} |
| 2740 |
EXPORT_SYMBOL(genphy_handle_interrupt_no_ack); |
| 2741 |
|
| 2742 |
/** |
| 2743 |
* genphy_read_abilities - read PHY abilities from Clause 22 registers |
| 2744 |
* @phydev: target phy_device struct |
| 2745 |
* |
| 2746 |
* Description: Reads the PHY's abilities and populates |
| 2747 |
* phydev->supported accordingly. |
| 2748 |
* |
| 2749 |
* Returns: 0 on success, < 0 on failure |
| 2750 |
*/ |
| 2751 |
int genphy_read_abilities(struct phy_device *phydev) |
| 2752 |
{ |
| 2753 |
int val; |
| 2754 |
|
| 2755 |
linkmode_set_bit_array(phy_basic_ports_array, |
| 2756 |
ARRAY_SIZE(phy_basic_ports_array), |
| 2757 |
phydev->supported); |
| 2758 |
|
| 2759 |
val = phy_read(phydev, MII_BMSR); |
| 2760 |
if (val < 0) |
| 2761 |
return val; |
| 2762 |
|
| 2763 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported, |
| 2764 |
val & BMSR_ANEGCAPABLE); |
| 2765 |
|
| 2766 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, phydev->supported, |
| 2767 |
val & BMSR_100FULL); |
| 2768 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported, |
| 2769 |
val & BMSR_100HALF); |
| 2770 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, phydev->supported, |
| 2771 |
val & BMSR_10FULL); |
| 2772 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported, |
| 2773 |
val & BMSR_10HALF); |
| 2774 |
|
| 2775 |
if (val & BMSR_ESTATEN) { |
| 2776 |
val = phy_read(phydev, MII_ESTATUS); |
| 2777 |
if (val < 0) |
| 2778 |
return val; |
| 2779 |
|
| 2780 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, |
| 2781 |
phydev->supported, val & ESTATUS_1000_TFULL); |
| 2782 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, |
| 2783 |
phydev->supported, val & ESTATUS_1000_THALF); |
| 2784 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, |
| 2785 |
phydev->supported, val & ESTATUS_1000_XFULL); |
| 2786 |
} |
| 2787 |
|
| 2788 |
/* This is optional functionality. If not supported, we may get an error |
| 2789 |
* which should be ignored. |
| 2790 |
*/ |
| 2791 |
genphy_c45_read_eee_abilities(phydev); |
| 2792 |
|
| 2793 |
return 0; |
| 2794 |
} |
| 2795 |
EXPORT_SYMBOL(genphy_read_abilities); |
| 2796 |
|
| 2797 |
/* This is used for the phy device which doesn't support the MMD extended |
| 2798 |
* register access, but it does have side effect when we are trying to access |
| 2799 |
* the MMD register via indirect method. |
| 2800 |
*/ |
| 2801 |
int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, u16 regnum) |
| 2802 |
{ |
| 2803 |
return -EOPNOTSUPP; |
| 2804 |
} |
| 2805 |
EXPORT_SYMBOL(genphy_read_mmd_unsupported); |
| 2806 |
|
| 2807 |
int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, |
| 2808 |
u16 regnum, u16 val) |
| 2809 |
{ |
| 2810 |
return -EOPNOTSUPP; |
| 2811 |
} |
| 2812 |
EXPORT_SYMBOL(genphy_write_mmd_unsupported); |
| 2813 |
|
| 2814 |
int genphy_suspend(struct phy_device *phydev) |
| 2815 |
{ |
| 2816 |
return phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN); |
| 2817 |
} |
| 2818 |
EXPORT_SYMBOL(genphy_suspend); |
| 2819 |
|
| 2820 |
int genphy_resume(struct phy_device *phydev) |
| 2821 |
{ |
| 2822 |
return phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN); |
| 2823 |
} |
| 2824 |
EXPORT_SYMBOL(genphy_resume); |
| 2825 |
|
| 2826 |
int genphy_loopback(struct phy_device *phydev, bool enable, int speed) |
| 2827 |
{ |
| 2828 |
if (enable) { |
| 2829 |
u16 ctl = BMCR_LOOPBACK; |
| 2830 |
int ret, val; |
| 2831 |
|
| 2832 |
if (speed == SPEED_10 || speed == SPEED_100 || |
| 2833 |
speed == SPEED_1000) |
| 2834 |
phydev->speed = speed; |
| 2835 |
else if (speed) |
| 2836 |
return -EINVAL; |
| 2837 |
|
| 2838 |
ctl |= mii_bmcr_encode_fixed(phydev->speed, phydev->duplex); |
| 2839 |
|
| 2840 |
phy_modify(phydev, MII_BMCR, ~0, ctl); |
| 2841 |
|
| 2842 |
ret = phy_read_poll_timeout(phydev, MII_BMSR, val, |
| 2843 |
val & BMSR_LSTATUS, |
| 2844 |
5000, 500000, true); |
| 2845 |
if (ret) |
| 2846 |
return ret; |
| 2847 |
} else { |
| 2848 |
phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK, 0); |
| 2849 |
|
| 2850 |
phy_config_aneg(phydev); |
| 2851 |
} |
| 2852 |
|
| 2853 |
return 0; |
| 2854 |
} |
| 2855 |
EXPORT_SYMBOL(genphy_loopback); |
| 2856 |
|
| 2857 |
/** |
| 2858 |
* phy_remove_link_mode - Remove a supported link mode |
| 2859 |
* @phydev: phy_device structure to remove link mode from |
| 2860 |
* @link_mode: Link mode to be removed |
| 2861 |
* |
| 2862 |
* Description: Some MACs don't support all link modes which the PHY |
| 2863 |
* does. e.g. a 1G MAC often does not support 1000Half. Add a helper |
| 2864 |
* to remove a link mode. |
| 2865 |
*/ |
| 2866 |
void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode) |
| 2867 |
{ |
| 2868 |
linkmode_clear_bit(link_mode, phydev->supported); |
| 2869 |
phy_advertise_supported(phydev); |
| 2870 |
} |
| 2871 |
EXPORT_SYMBOL(phy_remove_link_mode); |
| 2872 |
|
| 2873 |
static void phy_copy_pause_bits(unsigned long *dst, unsigned long *src) |
| 2874 |
{ |
| 2875 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, dst, |
| 2876 |
linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, src)); |
| 2877 |
linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, dst, |
| 2878 |
linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, src)); |
| 2879 |
} |
| 2880 |
|
| 2881 |
/** |
| 2882 |
* phy_advertise_supported - Advertise all supported modes |
| 2883 |
* @phydev: target phy_device struct |
| 2884 |
* |
| 2885 |
* Description: Called to advertise all supported modes, doesn't touch |
| 2886 |
* pause mode advertising. |
| 2887 |
*/ |
| 2888 |
void phy_advertise_supported(struct phy_device *phydev) |
| 2889 |
{ |
| 2890 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(new); |
| 2891 |
|
| 2892 |
linkmode_copy(new, phydev->supported); |
| 2893 |
phy_copy_pause_bits(new, phydev->advertising); |
| 2894 |
linkmode_copy(phydev->advertising, new); |
| 2895 |
} |
| 2896 |
EXPORT_SYMBOL(phy_advertise_supported); |
| 2897 |
|
| 2898 |
/** |
| 2899 |
* phy_advertise_eee_all - Advertise all supported EEE modes |
| 2900 |
* @phydev: target phy_device struct |
| 2901 |
* |
| 2902 |
* Description: Per default phylib preserves the EEE advertising at the time of |
| 2903 |
* phy probing, which might be a subset of the supported EEE modes. Use this |
| 2904 |
* function when all supported EEE modes should be advertised. This does not |
| 2905 |
* trigger auto-negotiation, so must be called before phy_start()/ |
| 2906 |
* phylink_start() which will start auto-negotiation. |
| 2907 |
*/ |
| 2908 |
void phy_advertise_eee_all(struct phy_device *phydev) |
| 2909 |
{ |
| 2910 |
linkmode_andnot(phydev->advertising_eee, phydev->supported_eee, |
| 2911 |
phydev->eee_disabled_modes); |
| 2912 |
} |
| 2913 |
EXPORT_SYMBOL_GPL(phy_advertise_eee_all); |
| 2914 |
|
| 2915 |
/** |
| 2916 |
* phy_support_eee - Set initial EEE policy configuration |
| 2917 |
* @phydev: Target phy_device struct |
| 2918 |
* |
| 2919 |
* This function configures the initial policy for Energy Efficient Ethernet |
| 2920 |
* (EEE) on the specified PHY device, influencing that EEE capabilities are |
| 2921 |
* advertised before the link is established. It should be called during PHY |
| 2922 |
* registration by the MAC driver and/or the PHY driver (for SmartEEE PHYs) |
| 2923 |
* if MAC supports LPI or PHY is capable to compensate missing LPI functionality |
| 2924 |
* of the MAC. |
| 2925 |
* |
| 2926 |
* The function sets default EEE policy parameters, including preparing the PHY |
| 2927 |
* to advertise EEE capabilities based on hardware support. |
| 2928 |
* |
| 2929 |
* It also sets the expected configuration for Low Power Idle (LPI) in the MAC |
| 2930 |
* driver. If the PHY framework determines that both local and remote |
| 2931 |
* advertisements support EEE, and the negotiated link mode is compatible with |
| 2932 |
* EEE, it will set enable_tx_lpi = true. The MAC driver is expected to act on |
| 2933 |
* this setting by enabling the LPI timer if enable_tx_lpi is set. |
| 2934 |
*/ |
| 2935 |
void phy_support_eee(struct phy_device *phydev) |
| 2936 |
{ |
| 2937 |
linkmode_andnot(phydev->advertising_eee, phydev->supported_eee, |
| 2938 |
phydev->eee_disabled_modes); |
| 2939 |
phydev->eee_cfg.tx_lpi_enabled = true; |
| 2940 |
phydev->eee_cfg.eee_enabled = true; |
| 2941 |
} |
| 2942 |
EXPORT_SYMBOL(phy_support_eee); |
| 2943 |
|
| 2944 |
/** |
| 2945 |
* phy_disable_eee - Disable EEE for the PHY |
| 2946 |
* @phydev: Target phy_device struct |
| 2947 |
* |
| 2948 |
* This function is used by MAC drivers for MAC's which don't support EEE. |
| 2949 |
* It disables EEE on the PHY layer. |
| 2950 |
*/ |
| 2951 |
void phy_disable_eee(struct phy_device *phydev) |
| 2952 |
{ |
| 2953 |
linkmode_zero(phydev->advertising_eee); |
| 2954 |
phydev->eee_cfg.tx_lpi_enabled = false; |
| 2955 |
phydev->eee_cfg.eee_enabled = false; |
| 2956 |
/* don't let userspace re-enable EEE advertisement */ |
| 2957 |
linkmode_fill(phydev->eee_disabled_modes); |
| 2958 |
} |
| 2959 |
EXPORT_SYMBOL_GPL(phy_disable_eee); |
| 2960 |
|
| 2961 |
/** |
| 2962 |
* phy_support_sym_pause - Enable support of symmetrical pause |
| 2963 |
* @phydev: target phy_device struct |
| 2964 |
* |
| 2965 |
* Description: Called by the MAC to indicate is supports symmetrical |
| 2966 |
* Pause, but not asym pause. |
| 2967 |
*/ |
| 2968 |
void phy_support_sym_pause(struct phy_device *phydev) |
| 2969 |
{ |
| 2970 |
linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported); |
| 2971 |
phy_copy_pause_bits(phydev->advertising, phydev->supported); |
| 2972 |
} |
| 2973 |
EXPORT_SYMBOL(phy_support_sym_pause); |
| 2974 |
|
| 2975 |
/** |
| 2976 |
* phy_support_asym_pause - Enable support of asym pause |
| 2977 |
* @phydev: target phy_device struct |
| 2978 |
* |
| 2979 |
* Description: Called by the MAC to indicate is supports Asym Pause. |
| 2980 |
*/ |
| 2981 |
void phy_support_asym_pause(struct phy_device *phydev) |
| 2982 |
{ |
| 2983 |
phy_copy_pause_bits(phydev->advertising, phydev->supported); |
| 2984 |
} |
| 2985 |
EXPORT_SYMBOL(phy_support_asym_pause); |
| 2986 |
|
| 2987 |
/** |
| 2988 |
* phy_set_sym_pause - Configure symmetric Pause |
| 2989 |
* @phydev: target phy_device struct |
| 2990 |
* @rx: Receiver Pause is supported |
| 2991 |
* @tx: Transmit Pause is supported |
| 2992 |
* @autoneg: Auto neg should be used |
| 2993 |
* |
| 2994 |
* Description: Configure advertised Pause support depending on if |
| 2995 |
* receiver pause and pause auto neg is supported. Generally called |
| 2996 |
* from the set_pauseparam .ndo. |
| 2997 |
*/ |
| 2998 |
void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx, |
| 2999 |
bool autoneg) |
| 3000 |
{ |
| 3001 |
linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported); |
| 3002 |
|
| 3003 |
if (rx && tx && autoneg) |
| 3004 |
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, |
| 3005 |
phydev->supported); |
| 3006 |
|
| 3007 |
linkmode_copy(phydev->advertising, phydev->supported); |
| 3008 |
} |
| 3009 |
EXPORT_SYMBOL(phy_set_sym_pause); |
| 3010 |
|
| 3011 |
/** |
| 3012 |
* phy_set_asym_pause - Configure Pause and Asym Pause |
| 3013 |
* @phydev: target phy_device struct |
| 3014 |
* @rx: Receiver Pause is supported |
| 3015 |
* @tx: Transmit Pause is supported |
| 3016 |
* |
| 3017 |
* Description: Configure advertised Pause support depending on if |
| 3018 |
* transmit and receiver pause is supported. If there has been a |
| 3019 |
* change in adverting, trigger a new autoneg. Generally called from |
| 3020 |
* the set_pauseparam .ndo. |
| 3021 |
*/ |
| 3022 |
void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx) |
| 3023 |
{ |
| 3024 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(oldadv); |
| 3025 |
|
| 3026 |
linkmode_copy(oldadv, phydev->advertising); |
| 3027 |
linkmode_set_pause(phydev->advertising, tx, rx); |
| 3028 |
|
| 3029 |
if (!linkmode_equal(oldadv, phydev->advertising) && |
| 3030 |
phydev->autoneg) |
| 3031 |
phy_start_aneg(phydev); |
| 3032 |
} |
| 3033 |
EXPORT_SYMBOL(phy_set_asym_pause); |
| 3034 |
|
| 3035 |
/** |
| 3036 |
* phy_validate_pause - Test if the PHY/MAC support the pause configuration |
| 3037 |
* @phydev: phy_device struct |
| 3038 |
* @pp: requested pause configuration |
| 3039 |
* |
| 3040 |
* Description: Test if the PHY/MAC combination supports the Pause |
| 3041 |
* configuration the user is requesting. Returns True if it is |
| 3042 |
* supported, false otherwise. |
| 3043 |
*/ |
| 3044 |
bool phy_validate_pause(struct phy_device *phydev, |
| 3045 |
struct ethtool_pauseparam *pp) |
| 3046 |
{ |
| 3047 |
if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, |
| 3048 |
phydev->supported) && pp->rx_pause) |
| 3049 |
return false; |
| 3050 |
|
| 3051 |
if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| 3052 |
phydev->supported) && |
| 3053 |
pp->rx_pause != pp->tx_pause) |
| 3054 |
return false; |
| 3055 |
|
| 3056 |
return true; |
| 3057 |
} |
| 3058 |
EXPORT_SYMBOL(phy_validate_pause); |
| 3059 |
|
| 3060 |
/** |
| 3061 |
* phy_get_pause - resolve negotiated pause modes |
| 3062 |
* @phydev: phy_device struct |
| 3063 |
* @tx_pause: pointer to bool to indicate whether transmit pause should be |
| 3064 |
* enabled. |
| 3065 |
* @rx_pause: pointer to bool to indicate whether receive pause should be |
| 3066 |
* enabled. |
| 3067 |
* |
| 3068 |
* Resolve and return the flow control modes according to the negotiation |
| 3069 |
* result. This includes checking that we are operating in full duplex mode. |
| 3070 |
* See linkmode_resolve_pause() for further details. |
| 3071 |
*/ |
| 3072 |
void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause) |
| 3073 |
{ |
| 3074 |
if (phydev->duplex != DUPLEX_FULL) { |
| 3075 |
*tx_pause = false; |
| 3076 |
*rx_pause = false; |
| 3077 |
return; |
| 3078 |
} |
| 3079 |
|
| 3080 |
return linkmode_resolve_pause(phydev->advertising, |
| 3081 |
phydev->lp_advertising, |
| 3082 |
tx_pause, rx_pause); |
| 3083 |
} |
| 3084 |
EXPORT_SYMBOL(phy_get_pause); |
| 3085 |
|
| 3086 |
#if IS_ENABLED(CONFIG_OF_MDIO) |
| 3087 |
static int phy_get_u32_property(struct device *dev, const char *name, u32 *val) |
| 3088 |
{ |
| 3089 |
return device_property_read_u32(dev, name, val); |
| 3090 |
} |
| 3091 |
#else |
| 3092 |
static int phy_get_u32_property(struct device *dev, const char *name, u32 *val) |
| 3093 |
{ |
| 3094 |
return -EINVAL; |
| 3095 |
} |
| 3096 |
#endif |
| 3097 |
|
| 3098 |
/** |
| 3099 |
* phy_get_internal_delay - returns the index of the internal delay |
| 3100 |
* @phydev: phy_device struct |
| 3101 |
* @delay_values: array of delays the PHY supports |
| 3102 |
* @size: the size of the delay array |
| 3103 |
* @is_rx: boolean to indicate to get the rx internal delay |
| 3104 |
* |
| 3105 |
* Returns the index within the array of internal delay passed in. |
| 3106 |
* If the device property is not present then the interface type is checked |
| 3107 |
* if the interface defines use of internal delay then a 1 is returned otherwise |
| 3108 |
* a 0 is returned. |
| 3109 |
* The array must be in ascending order. If PHY does not have an ascending order |
| 3110 |
* array then size = 0 and the value of the delay property is returned. |
| 3111 |
* Return -EINVAL if the delay is invalid or cannot be found. |
| 3112 |
*/ |
| 3113 |
s32 phy_get_internal_delay(struct phy_device *phydev, const int *delay_values, |
| 3114 |
int size, bool is_rx) |
| 3115 |
{ |
| 3116 |
struct device *dev = &phydev->mdio.dev; |
| 3117 |
int i, ret; |
| 3118 |
u32 delay; |
| 3119 |
|
| 3120 |
if (is_rx) { |
| 3121 |
ret = phy_get_u32_property(dev, "rx-internal-delay-ps", &delay); |
| 3122 |
if (ret < 0 && size == 0) { |
| 3123 |
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| 3124 |
phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) |
| 3125 |
return 1; |
| 3126 |
else |
| 3127 |
return 0; |
| 3128 |
} |
| 3129 |
|
| 3130 |
} else { |
| 3131 |
ret = phy_get_u32_property(dev, "tx-internal-delay-ps", &delay); |
| 3132 |
if (ret < 0 && size == 0) { |
| 3133 |
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| 3134 |
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) |
| 3135 |
return 1; |
| 3136 |
else |
| 3137 |
return 0; |
| 3138 |
} |
| 3139 |
} |
| 3140 |
|
| 3141 |
if (ret < 0) |
| 3142 |
return ret; |
| 3143 |
|
| 3144 |
if (size == 0) |
| 3145 |
return delay; |
| 3146 |
|
| 3147 |
if (delay < delay_values[0] || delay > delay_values[size - 1]) { |
| 3148 |
phydev_err(phydev, "Delay %d is out of range\n", delay); |
| 3149 |
return -EINVAL; |
| 3150 |
} |
| 3151 |
|
| 3152 |
if (delay == delay_values[0]) |
| 3153 |
return 0; |
| 3154 |
|
| 3155 |
for (i = 1; i < size; i++) { |
| 3156 |
if (delay == delay_values[i]) |
| 3157 |
return i; |
| 3158 |
|
| 3159 |
/* Find an approximate index by looking up the table */ |
| 3160 |
if (delay > delay_values[i - 1] && |
| 3161 |
delay < delay_values[i]) { |
| 3162 |
if (delay - delay_values[i - 1] < |
| 3163 |
delay_values[i] - delay) |
| 3164 |
return i - 1; |
| 3165 |
else |
| 3166 |
return i; |
| 3167 |
} |
| 3168 |
} |
| 3169 |
|
| 3170 |
phydev_err(phydev, "error finding internal delay index for %d\n", |
| 3171 |
delay); |
| 3172 |
|
| 3173 |
return -EINVAL; |
| 3174 |
} |
| 3175 |
EXPORT_SYMBOL(phy_get_internal_delay); |
| 3176 |
|
| 3177 |
/** |
| 3178 |
* phy_get_tx_amplitude_gain - stores tx amplitude gain in @val |
| 3179 |
* @phydev: phy_device struct |
| 3180 |
* @dev: pointer to the devices device struct |
| 3181 |
* @linkmode: linkmode for which the tx amplitude gain should be retrieved |
| 3182 |
* @val: tx amplitude gain |
| 3183 |
* |
| 3184 |
* Returns: 0 on success, < 0 on failure |
| 3185 |
*/ |
| 3186 |
int phy_get_tx_amplitude_gain(struct phy_device *phydev, struct device *dev, |
| 3187 |
enum ethtool_link_mode_bit_indices linkmode, |
| 3188 |
u32 *val) |
| 3189 |
{ |
| 3190 |
switch (linkmode) { |
| 3191 |
case ETHTOOL_LINK_MODE_100baseT_Full_BIT: |
| 3192 |
return phy_get_u32_property(dev, |
| 3193 |
"tx-amplitude-100base-tx-percent", |
| 3194 |
val); |
| 3195 |
default: |
| 3196 |
return -EINVAL; |
| 3197 |
} |
| 3198 |
} |
| 3199 |
EXPORT_SYMBOL_GPL(phy_get_tx_amplitude_gain); |
| 3200 |
|
| 3201 |
/** |
| 3202 |
* phy_get_mac_termination - stores MAC termination in @val |
| 3203 |
* @phydev: phy_device struct |
| 3204 |
* @dev: pointer to the devices device struct |
| 3205 |
* @val: MAC termination |
| 3206 |
* |
| 3207 |
* Returns: 0 on success, < 0 on failure |
| 3208 |
*/ |
| 3209 |
int phy_get_mac_termination(struct phy_device *phydev, struct device *dev, |
| 3210 |
u32 *val) |
| 3211 |
{ |
| 3212 |
return phy_get_u32_property(dev, "mac-termination-ohms", val); |
| 3213 |
} |
| 3214 |
EXPORT_SYMBOL_GPL(phy_get_mac_termination); |
| 3215 |
|
| 3216 |
static int phy_led_set_brightness(struct led_classdev *led_cdev, |
| 3217 |
enum led_brightness value) |
| 3218 |
{ |
| 3219 |
struct phy_led *phyled = to_phy_led(led_cdev); |
| 3220 |
struct phy_device *phydev = phyled->phydev; |
| 3221 |
int err; |
| 3222 |
|
| 3223 |
mutex_lock(&phydev->lock); |
| 3224 |
err = phydev->drv->led_brightness_set(phydev, phyled->index, value); |
| 3225 |
mutex_unlock(&phydev->lock); |
| 3226 |
|
| 3227 |
return err; |
| 3228 |
} |
| 3229 |
|
| 3230 |
static int phy_led_blink_set(struct led_classdev *led_cdev, |
| 3231 |
unsigned long *delay_on, |
| 3232 |
unsigned long *delay_off) |
| 3233 |
{ |
| 3234 |
struct phy_led *phyled = to_phy_led(led_cdev); |
| 3235 |
struct phy_device *phydev = phyled->phydev; |
| 3236 |
int err; |
| 3237 |
|
| 3238 |
mutex_lock(&phydev->lock); |
| 3239 |
err = phydev->drv->led_blink_set(phydev, phyled->index, |
| 3240 |
delay_on, delay_off); |
| 3241 |
mutex_unlock(&phydev->lock); |
| 3242 |
|
| 3243 |
return err; |
| 3244 |
} |
| 3245 |
|
| 3246 |
static __maybe_unused struct device * |
| 3247 |
phy_led_hw_control_get_device(struct led_classdev *led_cdev) |
| 3248 |
{ |
| 3249 |
struct phy_led *phyled = to_phy_led(led_cdev); |
| 3250 |
struct phy_device *phydev = phyled->phydev; |
| 3251 |
|
| 3252 |
if (phydev->attached_dev) |
| 3253 |
return &phydev->attached_dev->dev; |
| 3254 |
return NULL; |
| 3255 |
} |
| 3256 |
|
| 3257 |
static int __maybe_unused |
| 3258 |
phy_led_hw_control_get(struct led_classdev *led_cdev, |
| 3259 |
unsigned long *rules) |
| 3260 |
{ |
| 3261 |
struct phy_led *phyled = to_phy_led(led_cdev); |
| 3262 |
struct phy_device *phydev = phyled->phydev; |
| 3263 |
int err; |
| 3264 |
|
| 3265 |
mutex_lock(&phydev->lock); |
| 3266 |
err = phydev->drv->led_hw_control_get(phydev, phyled->index, rules); |
| 3267 |
mutex_unlock(&phydev->lock); |
| 3268 |
|
| 3269 |
return err; |
| 3270 |
} |
| 3271 |
|
| 3272 |
static int __maybe_unused |
| 3273 |
phy_led_hw_control_set(struct led_classdev *led_cdev, |
| 3274 |
unsigned long rules) |
| 3275 |
{ |
| 3276 |
struct phy_led *phyled = to_phy_led(led_cdev); |
| 3277 |
struct phy_device *phydev = phyled->phydev; |
| 3278 |
int err; |
| 3279 |
|
| 3280 |
mutex_lock(&phydev->lock); |
| 3281 |
err = phydev->drv->led_hw_control_set(phydev, phyled->index, rules); |
| 3282 |
mutex_unlock(&phydev->lock); |
| 3283 |
|
| 3284 |
return err; |
| 3285 |
} |
| 3286 |
|
| 3287 |
static __maybe_unused int phy_led_hw_is_supported(struct led_classdev *led_cdev, |
| 3288 |
unsigned long rules) |
| 3289 |
{ |
| 3290 |
struct phy_led *phyled = to_phy_led(led_cdev); |
| 3291 |
struct phy_device *phydev = phyled->phydev; |
| 3292 |
int err; |
| 3293 |
|
| 3294 |
mutex_lock(&phydev->lock); |
| 3295 |
err = phydev->drv->led_hw_is_supported(phydev, phyled->index, rules); |
| 3296 |
mutex_unlock(&phydev->lock); |
| 3297 |
|
| 3298 |
return err; |
| 3299 |
} |
| 3300 |
|
| 3301 |
static void phy_leds_unregister(struct phy_device *phydev) |
| 3302 |
{ |
| 3303 |
struct phy_led *phyled, *tmp; |
| 3304 |
|
| 3305 |
list_for_each_entry_safe(phyled, tmp, &phydev->leds, list) { |
| 3306 |
led_classdev_unregister(&phyled->led_cdev); |
| 3307 |
list_del(&phyled->list); |
| 3308 |
} |
| 3309 |
} |
| 3310 |
|
| 3311 |
static int of_phy_led(struct phy_device *phydev, |
| 3312 |
struct device_node *led) |
| 3313 |
{ |
| 3314 |
struct device *dev = &phydev->mdio.dev; |
| 3315 |
struct led_init_data init_data = {}; |
| 3316 |
struct led_classdev *cdev; |
| 3317 |
unsigned long modes = 0; |
| 3318 |
struct phy_led *phyled; |
| 3319 |
u32 index; |
| 3320 |
int err; |
| 3321 |
|
| 3322 |
phyled = devm_kzalloc(dev, sizeof(*phyled), GFP_KERNEL); |
| 3323 |
if (!phyled) |
| 3324 |
return -ENOMEM; |
| 3325 |
|
| 3326 |
cdev = &phyled->led_cdev; |
| 3327 |
phyled->phydev = phydev; |
| 3328 |
|
| 3329 |
err = of_property_read_u32(led, "reg", &index); |
| 3330 |
if (err) |
| 3331 |
return err; |
| 3332 |
if (index > U8_MAX) |
| 3333 |
return -EINVAL; |
| 3334 |
|
| 3335 |
if (of_property_read_bool(led, "active-high")) |
| 3336 |
set_bit(PHY_LED_ACTIVE_HIGH, &modes); |
| 3337 |
if (of_property_read_bool(led, "active-low")) |
| 3338 |
set_bit(PHY_LED_ACTIVE_LOW, &modes); |
| 3339 |
if (of_property_read_bool(led, "inactive-high-impedance")) |
| 3340 |
set_bit(PHY_LED_INACTIVE_HIGH_IMPEDANCE, &modes); |
| 3341 |
|
| 3342 |
if (WARN_ON(modes & BIT(PHY_LED_ACTIVE_LOW) && |
| 3343 |
modes & BIT(PHY_LED_ACTIVE_HIGH))) |
| 3344 |
return -EINVAL; |
| 3345 |
|
| 3346 |
if (modes) { |
| 3347 |
/* Return error if asked to set polarity modes but not supported */ |
| 3348 |
if (!phydev->drv->led_polarity_set) |
| 3349 |
return -EINVAL; |
| 3350 |
|
| 3351 |
err = phydev->drv->led_polarity_set(phydev, index, modes); |
| 3352 |
if (err) |
| 3353 |
return err; |
| 3354 |
} |
| 3355 |
|
| 3356 |
phyled->index = index; |
| 3357 |
if (phydev->drv->led_brightness_set) |
| 3358 |
cdev->brightness_set_blocking = phy_led_set_brightness; |
| 3359 |
if (phydev->drv->led_blink_set) |
| 3360 |
cdev->blink_set = phy_led_blink_set; |
| 3361 |
|
| 3362 |
#ifdef CONFIG_LEDS_TRIGGERS |
| 3363 |
if (phydev->drv->led_hw_is_supported && |
| 3364 |
phydev->drv->led_hw_control_set && |
| 3365 |
phydev->drv->led_hw_control_get) { |
| 3366 |
cdev->hw_control_is_supported = phy_led_hw_is_supported; |
| 3367 |
cdev->hw_control_set = phy_led_hw_control_set; |
| 3368 |
cdev->hw_control_get = phy_led_hw_control_get; |
| 3369 |
cdev->hw_control_trigger = "netdev"; |
| 3370 |
} |
| 3371 |
|
| 3372 |
cdev->hw_control_get_device = phy_led_hw_control_get_device; |
| 3373 |
#endif |
| 3374 |
cdev->max_brightness = 1; |
| 3375 |
init_data.devicename = dev_name(&phydev->mdio.dev); |
| 3376 |
init_data.fwnode = of_fwnode_handle(led); |
| 3377 |
init_data.devname_mandatory = true; |
| 3378 |
|
| 3379 |
err = led_classdev_register_ext(dev, cdev, &init_data); |
| 3380 |
if (err) |
| 3381 |
return err; |
| 3382 |
|
| 3383 |
list_add(&phyled->list, &phydev->leds); |
| 3384 |
|
| 3385 |
return 0; |
| 3386 |
} |
| 3387 |
|
| 3388 |
static int of_phy_leds(struct phy_device *phydev) |
| 3389 |
{ |
| 3390 |
struct device_node *node = phydev->mdio.dev.of_node; |
| 3391 |
struct device_node *leds; |
| 3392 |
int err; |
| 3393 |
|
| 3394 |
if (!IS_ENABLED(CONFIG_OF_MDIO)) |
| 3395 |
return 0; |
| 3396 |
|
| 3397 |
if (!node) |
| 3398 |
return 0; |
| 3399 |
|
| 3400 |
leds = of_get_child_by_name(node, "leds"); |
| 3401 |
if (!leds) |
| 3402 |
return 0; |
| 3403 |
|
| 3404 |
/* Check if the PHY driver have at least an OP to |
| 3405 |
* set the LEDs. |
| 3406 |
*/ |
| 3407 |
if (!(phydev->drv->led_brightness_set || |
| 3408 |
phydev->drv->led_blink_set || |
| 3409 |
phydev->drv->led_hw_control_set)) { |
| 3410 |
phydev_dbg(phydev, "ignoring leds node defined with no PHY driver support\n"); |
| 3411 |
goto exit; |
| 3412 |
} |
| 3413 |
|
| 3414 |
for_each_available_child_of_node_scoped(leds, led) { |
| 3415 |
err = of_phy_led(phydev, led); |
| 3416 |
if (err) { |
| 3417 |
of_node_put(leds); |
| 3418 |
phy_leds_unregister(phydev); |
| 3419 |
return err; |
| 3420 |
} |
| 3421 |
} |
| 3422 |
|
| 3423 |
exit: |
| 3424 |
of_node_put(leds); |
| 3425 |
return 0; |
| 3426 |
} |
| 3427 |
|
| 3428 |
static void phy_cleanup_ports(struct phy_device *phydev) |
| 3429 |
{ |
| 3430 |
struct phy_port *tmp, *port; |
| 3431 |
|
| 3432 |
list_for_each_entry_safe(port, tmp, &phydev->ports, head) { |
| 3433 |
phy_del_port(phydev, port); |
| 3434 |
phy_port_destroy(port); |
| 3435 |
} |
| 3436 |
} |
| 3437 |
|
| 3438 |
static int phy_default_setup_single_port(struct phy_device *phydev) |
| 3439 |
{ |
| 3440 |
struct phy_port *port = phy_port_alloc(); |
| 3441 |
unsigned long mode; |
| 3442 |
|
| 3443 |
if (!port) |
| 3444 |
return -ENOMEM; |
| 3445 |
|
| 3446 |
port->parent_type = PHY_PORT_PHY; |
| 3447 |
port->phy = phydev; |
| 3448 |
|
| 3449 |
/* Let the PHY driver know that this port was never described anywhere. |
| 3450 |
* This is the usual case, where we assume single-port PHY devices with |
| 3451 |
* no SFP. In that case, the port supports exactly the same thing as |
| 3452 |
* the PHY itself. |
| 3453 |
* |
| 3454 |
* However, this can also be because we have a combo-port PHY, with |
| 3455 |
* only one port described in DT, through SFP for example. |
| 3456 |
* |
| 3457 |
* In that case, the PHY driver will be in charge of saying what we can |
| 3458 |
* do on that non-represented port. |
| 3459 |
*/ |
| 3460 |
port->not_described = true; |
| 3461 |
linkmode_copy(port->supported, phydev->supported); |
| 3462 |
port->mediums = phy_caps_mediums_from_linkmodes(port->supported); |
| 3463 |
|
| 3464 |
for_each_set_bit(mode, port->supported, __ETHTOOL_LINK_MODE_MASK_NBITS) |
| 3465 |
port->pairs = max_t(int, port->pairs, |
| 3466 |
ethtool_linkmode_n_pairs(mode)); |
| 3467 |
|
| 3468 |
phy_add_port(phydev, port); |
| 3469 |
|
| 3470 |
return 0; |
| 3471 |
} |
| 3472 |
|
| 3473 |
static int of_phy_ports(struct phy_device *phydev) |
| 3474 |
{ |
| 3475 |
struct device_node *node = phydev->mdio.dev.of_node; |
| 3476 |
struct device_node *mdi; |
| 3477 |
struct phy_port *port; |
| 3478 |
int err; |
| 3479 |
|
| 3480 |
if (!IS_ENABLED(CONFIG_OF_MDIO)) |
| 3481 |
return 0; |
| 3482 |
|
| 3483 |
if (!node) |
| 3484 |
return 0; |
| 3485 |
|
| 3486 |
mdi = of_get_child_by_name(node, "mdi"); |
| 3487 |
if (!mdi) |
| 3488 |
return 0; |
| 3489 |
|
| 3490 |
for_each_available_child_of_node_scoped(mdi, port_node) { |
| 3491 |
port = phy_of_parse_port(port_node); |
| 3492 |
if (IS_ERR(port)) { |
| 3493 |
err = PTR_ERR(port); |
| 3494 |
goto out_err; |
| 3495 |
} |
| 3496 |
|
| 3497 |
port->parent_type = PHY_PORT_PHY; |
| 3498 |
port->phy = phydev; |
| 3499 |
|
| 3500 |
linkmode_copy(port->supported, phydev->supported); |
| 3501 |
|
| 3502 |
err = phy_add_port(phydev, port); |
| 3503 |
if (err) { |
| 3504 |
phy_port_destroy(port); |
| 3505 |
goto out_err; |
| 3506 |
} |
| 3507 |
} |
| 3508 |
of_node_put(mdi); |
| 3509 |
|
| 3510 |
return 0; |
| 3511 |
|
| 3512 |
out_err: |
| 3513 |
phy_cleanup_ports(phydev); |
| 3514 |
of_node_put(mdi); |
| 3515 |
return err; |
| 3516 |
} |
| 3517 |
|
| 3518 |
static int phy_setup_ports(struct phy_device *phydev) |
| 3519 |
{ |
| 3520 |
__ETHTOOL_DECLARE_LINK_MODE_MASK(ports_supported); |
| 3521 |
struct phy_port *port; |
| 3522 |
int ret; |
| 3523 |
|
| 3524 |
ret = of_phy_ports(phydev); |
| 3525 |
if (ret) |
| 3526 |
return ret; |
| 3527 |
|
| 3528 |
ret = phy_sfp_probe(phydev); |
| 3529 |
if (ret) |
| 3530 |
goto out; |
| 3531 |
|
| 3532 |
if (phydev->n_ports < phydev->max_n_ports) { |
| 3533 |
ret = phy_default_setup_single_port(phydev); |
| 3534 |
if (ret) |
| 3535 |
goto out; |
| 3536 |
} |
| 3537 |
|
| 3538 |
linkmode_zero(ports_supported); |
| 3539 |
|
| 3540 |
/* Aggregate the supported modes, which are made-up of : |
| 3541 |
* - What the PHY itself supports |
| 3542 |
* - What the sum of all ports support |
| 3543 |
*/ |
| 3544 |
list_for_each_entry(port, &phydev->ports, head) |
| 3545 |
if (port->active) |
| 3546 |
linkmode_or(ports_supported, ports_supported, |
| 3547 |
port->supported); |
| 3548 |
|
| 3549 |
if (!linkmode_empty(ports_supported)) |
| 3550 |
linkmode_and(phydev->supported, phydev->supported, |
| 3551 |
ports_supported); |
| 3552 |
|
| 3553 |
/* For now, the phy->port field is set as the first active port's type */ |
| 3554 |
list_for_each_entry(port, &phydev->ports, head) |
| 3555 |
if (port->active) { |
| 3556 |
phydev->port = phy_port_get_type(port); |
| 3557 |
break; |
| 3558 |
} |
| 3559 |
|
| 3560 |
return 0; |
| 3561 |
|
| 3562 |
out: |
| 3563 |
phy_cleanup_ports(phydev); |
| 3564 |
return ret; |
| 3565 |
} |
| 3566 |
|
| 3567 |
/** |
| 3568 |
* phy_get_sfp_port() - Returns the first valid SFP port of a PHY |
| 3569 |
* @phydev: pointer to the PHY device to get the SFP port from |
| 3570 |
* |
| 3571 |
* Returns: The first active SFP (serdes) port of a PHY device, NULL if none |
| 3572 |
* exist. |
| 3573 |
*/ |
| 3574 |
struct phy_port *phy_get_sfp_port(struct phy_device *phydev) |
| 3575 |
{ |
| 3576 |
struct phy_port *port; |
| 3577 |
|
| 3578 |
list_for_each_entry(port, &phydev->ports, head) |
| 3579 |
if (port->active && port->is_sfp) |
| 3580 |
return port; |
| 3581 |
|
| 3582 |
return NULL; |
| 3583 |
} |
| 3584 |
EXPORT_SYMBOL_GPL(phy_get_sfp_port); |
| 3585 |
|
| 3586 |
/** |
| 3587 |
* fwnode_mdio_find_device - Given a fwnode, find the mdio_device |
| 3588 |
* @fwnode: pointer to the mdio_device's fwnode |
| 3589 |
* |
| 3590 |
* If successful, returns a pointer to the mdio_device with the embedded |
| 3591 |
* struct device refcount incremented by one, or NULL on failure. |
| 3592 |
* The caller should call put_device() on the mdio_device after its use. |
| 3593 |
*/ |
| 3594 |
struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode) |
| 3595 |
{ |
| 3596 |
struct device *d; |
| 3597 |
|
| 3598 |
if (!fwnode) |
| 3599 |
return NULL; |
| 3600 |
|
| 3601 |
d = bus_find_device_by_fwnode(&mdio_bus_type, fwnode); |
| 3602 |
if (!d) |
| 3603 |
return NULL; |
| 3604 |
|
| 3605 |
return to_mdio_device(d); |
| 3606 |
} |
| 3607 |
EXPORT_SYMBOL(fwnode_mdio_find_device); |
| 3608 |
|
| 3609 |
/** |
| 3610 |
* fwnode_phy_find_device - For provided phy_fwnode, find phy_device. |
| 3611 |
* |
| 3612 |
* @phy_fwnode: Pointer to the phy's fwnode. |
| 3613 |
* |
| 3614 |
* If successful, returns a pointer to the phy_device with the embedded |
| 3615 |
* struct device refcount incremented by one, or NULL on failure. |
| 3616 |
*/ |
| 3617 |
struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode) |
| 3618 |
{ |
| 3619 |
struct mdio_device *mdiodev; |
| 3620 |
|
| 3621 |
mdiodev = fwnode_mdio_find_device(phy_fwnode); |
| 3622 |
if (!mdiodev) |
| 3623 |
return NULL; |
| 3624 |
|
| 3625 |
if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY) |
| 3626 |
return to_phy_device(&mdiodev->dev); |
| 3627 |
|
| 3628 |
put_device(&mdiodev->dev); |
| 3629 |
|
| 3630 |
return NULL; |
| 3631 |
} |
| 3632 |
EXPORT_SYMBOL(fwnode_phy_find_device); |
| 3633 |
|
| 3634 |
/** |
| 3635 |
* fwnode_get_phy_node - Get the phy_node using the named reference. |
| 3636 |
* @fwnode: Pointer to fwnode from which phy_node has to be obtained. |
| 3637 |
* |
| 3638 |
* Refer return conditions of fwnode_find_reference(). |
| 3639 |
* For ACPI, only "phy-handle" is supported. Legacy DT properties "phy" |
| 3640 |
* and "phy-device" are not supported in ACPI. DT supports all the three |
| 3641 |
* named references to the phy node. |
| 3642 |
*/ |
| 3643 |
struct fwnode_handle *fwnode_get_phy_node(const struct fwnode_handle *fwnode) |
| 3644 |
{ |
| 3645 |
struct fwnode_handle *phy_node; |
| 3646 |
|
| 3647 |
/* Only phy-handle is used for ACPI */ |
| 3648 |
phy_node = fwnode_find_reference(fwnode, "phy-handle", 0); |
| 3649 |
if (!IS_ERR(phy_node) || is_acpi_node(fwnode)) |
| 3650 |
return phy_node; |
| 3651 |
phy_node = fwnode_find_reference(fwnode, "phy", 0); |
| 3652 |
if (!IS_ERR(phy_node)) |
| 3653 |
return phy_node; |
| 3654 |
return fwnode_find_reference(fwnode, "phy-device", 0); |
| 3655 |
} |
| 3656 |
EXPORT_SYMBOL_GPL(fwnode_get_phy_node); |
| 3657 |
|
| 3658 |
/** |
| 3659 |
* phy_probe - probe and init a PHY device |
| 3660 |
* @dev: device to probe and init |
| 3661 |
* |
| 3662 |
* Take care of setting up the phy_device structure, set the state to READY. |
| 3663 |
*/ |
| 3664 |
static int phy_probe(struct device *dev) |
| 3665 |
{ |
| 3666 |
struct phy_device *phydev = to_phy_device(dev); |
| 3667 |
struct device_driver *drv = phydev->mdio.dev.driver; |
| 3668 |
struct phy_driver *phydrv = to_phy_driver(drv); |
| 3669 |
int err = 0; |
| 3670 |
|
| 3671 |
phydev->drv = phydrv; |
| 3672 |
|
| 3673 |
/* Disable the interrupt if the PHY doesn't support it |
| 3674 |
* but the interrupt is still a valid one |
| 3675 |
*/ |
| 3676 |
if (!phy_drv_supports_irq(phydrv) && phy_interrupt_is_valid(phydev)) |
| 3677 |
phydev->irq = PHY_POLL; |
| 3678 |
|
| 3679 |
if (phydrv->flags & PHY_IS_INTERNAL) |
| 3680 |
phydev->is_internal = true; |
| 3681 |
|
| 3682 |
/* Deassert the reset signal */ |
| 3683 |
phy_device_reset(phydev, 0); |
| 3684 |
|
| 3685 |
if (phydev->drv->probe) { |
| 3686 |
err = phydev->drv->probe(phydev); |
| 3687 |
if (err) |
| 3688 |
goto out; |
| 3689 |
} |
| 3690 |
|
| 3691 |
phy_disable_interrupts(phydev); |
| 3692 |
|
| 3693 |
/* Start out supporting everything. Eventually, |
| 3694 |
* a controller will attach, and may modify one |
| 3695 |
* or both of these values |
| 3696 |
*/ |
| 3697 |
if (phydrv->features) { |
| 3698 |
linkmode_copy(phydev->supported, phydrv->features); |
| 3699 |
genphy_c45_read_eee_abilities(phydev); |
| 3700 |
} |
| 3701 |
else if (phydrv->get_features) |
| 3702 |
err = phydrv->get_features(phydev); |
| 3703 |
else if (phydev->is_c45) |
| 3704 |
err = genphy_c45_pma_read_abilities(phydev); |
| 3705 |
else |
| 3706 |
err = genphy_read_abilities(phydev); |
| 3707 |
|
| 3708 |
if (err) |
| 3709 |
goto out; |
| 3710 |
|
| 3711 |
if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, |
| 3712 |
phydev->supported)) |
| 3713 |
phydev->autoneg = 0; |
| 3714 |
|
| 3715 |
if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, |
| 3716 |
phydev->supported)) |
| 3717 |
phydev->is_gigabit_capable = 1; |
| 3718 |
if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, |
| 3719 |
phydev->supported)) |
| 3720 |
phydev->is_gigabit_capable = 1; |
| 3721 |
|
| 3722 |
of_set_phy_supported(phydev); |
| 3723 |
|
| 3724 |
err = phy_setup_ports(phydev); |
| 3725 |
if (err) |
| 3726 |
goto out; |
| 3727 |
|
| 3728 |
phy_advertise_supported(phydev); |
| 3729 |
|
| 3730 |
/* Get PHY default EEE advertising modes and handle them as potentially |
| 3731 |
* safe initial configuration. |
| 3732 |
*/ |
| 3733 |
err = genphy_c45_read_eee_adv(phydev, phydev->advertising_eee); |
| 3734 |
if (err) |
| 3735 |
goto out; |
| 3736 |
|
| 3737 |
/* Get the EEE modes we want to prohibit. */ |
| 3738 |
of_set_phy_eee_broken(phydev); |
| 3739 |
|
| 3740 |
/* Some PHYs may advertise, by default, not support EEE modes. So, |
| 3741 |
* we need to clean them. In addition remove all disabled EEE modes. |
| 3742 |
*/ |
| 3743 |
linkmode_and(phydev->advertising_eee, phydev->supported_eee, |
| 3744 |
phydev->advertising_eee); |
| 3745 |
linkmode_andnot(phydev->advertising_eee, phydev->advertising_eee, |
| 3746 |
phydev->eee_disabled_modes); |
| 3747 |
|
| 3748 |
/* There is no "enabled" flag. If PHY is advertising, assume it is |
| 3749 |
* kind of enabled. |
| 3750 |
*/ |
| 3751 |
phydev->eee_cfg.eee_enabled = !linkmode_empty(phydev->advertising_eee); |
| 3752 |
|
| 3753 |
/* Get master/slave strap overrides */ |
| 3754 |
of_set_phy_timing_role(phydev); |
| 3755 |
|
| 3756 |
/* The Pause Frame bits indicate that the PHY can support passing |
| 3757 |
* pause frames. During autonegotiation, the PHYs will determine if |
| 3758 |
* they should allow pause frames to pass. The MAC driver should then |
| 3759 |
* use that result to determine whether to enable flow control via |
| 3760 |
* pause frames. |
| 3761 |
* |
| 3762 |
* Normally, PHY drivers should not set the Pause bits, and instead |
| 3763 |
* allow phylib to do that. However, there may be some situations |
| 3764 |
* (e.g. hardware erratum) where the driver wants to set only one |
| 3765 |
* of these bits. |
| 3766 |
*/ |
| 3767 |
if (!test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported) && |
| 3768 |
!test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported)) { |
| 3769 |
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, |
| 3770 |
phydev->supported); |
| 3771 |
linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| 3772 |
phydev->supported); |
| 3773 |
} |
| 3774 |
|
| 3775 |
/* Set the state to READY by default */ |
| 3776 |
phydev->state = PHY_READY; |
| 3777 |
|
| 3778 |
/* Register the PHY LED triggers */ |
| 3779 |
if (!phydev->is_on_sfp_module) |
| 3780 |
phy_led_triggers_register(phydev); |
| 3781 |
|
| 3782 |
/* Get the LEDs from the device tree, and instantiate standard |
| 3783 |
* LEDs for them. |
| 3784 |
*/ |
| 3785 |
if (IS_ENABLED(CONFIG_PHYLIB_LEDS) && !phy_driver_is_genphy(phydev)) { |
| 3786 |
err = of_phy_leds(phydev); |
| 3787 |
if (err) |
| 3788 |
goto out; |
| 3789 |
} |
| 3790 |
|
| 3791 |
return 0; |
| 3792 |
|
| 3793 |
out: |
| 3794 |
if (!phydev->is_on_sfp_module) |
| 3795 |
phy_led_triggers_unregister(phydev); |
| 3796 |
|
| 3797 |
/* Re-assert the reset signal on error */ |
| 3798 |
phy_device_reset(phydev, 1); |
| 3799 |
|
| 3800 |
return err; |
| 3801 |
} |
| 3802 |
|
| 3803 |
static int phy_remove(struct device *dev) |
| 3804 |
{ |
| 3805 |
struct phy_device *phydev = to_phy_device(dev); |
| 3806 |
|
| 3807 |
cancel_delayed_work_sync(&phydev->state_queue); |
| 3808 |
|
| 3809 |
if (IS_ENABLED(CONFIG_PHYLIB_LEDS) && !phy_driver_is_genphy(phydev)) |
| 3810 |
phy_leds_unregister(phydev); |
| 3811 |
|
| 3812 |
if (!phydev->is_on_sfp_module) |
| 3813 |
phy_led_triggers_unregister(phydev); |
| 3814 |
|
| 3815 |
phydev->state = PHY_DOWN; |
| 3816 |
|
| 3817 |
phy_cleanup_ports(phydev); |
| 3818 |
|
| 3819 |
sfp_bus_del_upstream(phydev->sfp_bus); |
| 3820 |
phydev->sfp_bus = NULL; |
| 3821 |
|
| 3822 |
if (phydev->drv && phydev->drv->remove) |
| 3823 |
phydev->drv->remove(phydev); |
| 3824 |
|
| 3825 |
/* Assert the reset signal */ |
| 3826 |
phy_device_reset(phydev, 1); |
| 3827 |
|
| 3828 |
phydev->drv = NULL; |
| 3829 |
|
| 3830 |
return 0; |
| 3831 |
} |
| 3832 |
|
| 3833 |
/** |
| 3834 |
* phy_driver_register - register a phy_driver with the PHY layer |
| 3835 |
* @new_driver: new phy_driver to register |
| 3836 |
* @owner: module owning this PHY |
| 3837 |
*/ |
| 3838 |
static int phy_driver_register(struct phy_driver *new_driver, |
| 3839 |
struct module *owner) |
| 3840 |
{ |
| 3841 |
int retval; |
| 3842 |
|
| 3843 |
/* Either the features are hard coded, or dynamically |
| 3844 |
* determined. It cannot be both. |
| 3845 |
*/ |
| 3846 |
if (WARN_ON(new_driver->features && new_driver->get_features)) { |
| 3847 |
pr_err("%s: features and get_features must not both be set\n", |
| 3848 |
new_driver->name); |
| 3849 |
return -EINVAL; |
| 3850 |
} |
| 3851 |
|
| 3852 |
/* PHYLIB device drivers must not match using a DT compatible table |
| 3853 |
* as this bypasses our checks that the mdiodev that is being matched |
| 3854 |
* is backed by a struct phy_device. If such a case happens, we will |
| 3855 |
* make out-of-bounds accesses and lockup in phydev->lock. |
| 3856 |
*/ |
| 3857 |
if (WARN(new_driver->mdiodrv.driver.of_match_table, |
| 3858 |
"%s: driver must not provide a DT match table\n", |
| 3859 |
new_driver->name)) |
| 3860 |
return -EINVAL; |
| 3861 |
|
| 3862 |
new_driver->mdiodrv.flags |= MDIO_DEVICE_IS_PHY; |
| 3863 |
new_driver->mdiodrv.driver.name = new_driver->name; |
| 3864 |
new_driver->mdiodrv.driver.bus = &mdio_bus_type; |
| 3865 |
new_driver->mdiodrv.driver.probe = phy_probe; |
| 3866 |
new_driver->mdiodrv.driver.remove = phy_remove; |
| 3867 |
new_driver->mdiodrv.driver.owner = owner; |
| 3868 |
new_driver->mdiodrv.driver.probe_type = PROBE_FORCE_SYNCHRONOUS; |
| 3869 |
|
| 3870 |
retval = driver_register(&new_driver->mdiodrv.driver); |
| 3871 |
if (retval) { |
| 3872 |
pr_err("%s: Error %d in registering driver\n", |
| 3873 |
new_driver->name, retval); |
| 3874 |
|
| 3875 |
return retval; |
| 3876 |
} |
| 3877 |
|
| 3878 |
pr_debug("%s: Registered new driver\n", new_driver->name); |
| 3879 |
|
| 3880 |
return 0; |
| 3881 |
} |
| 3882 |
|
| 3883 |
static void phy_driver_unregister(struct phy_driver *drv) |
| 3884 |
{ |
| 3885 |
driver_unregister(&drv->mdiodrv.driver); |
| 3886 |
} |
| 3887 |
|
| 3888 |
int phy_drivers_register(struct phy_driver *new_driver, int n, |
| 3889 |
struct module *owner) |
| 3890 |
{ |
| 3891 |
int i, ret = 0; |
| 3892 |
|
| 3893 |
for (i = 0; i < n; i++) { |
| 3894 |
ret = phy_driver_register(new_driver + i, owner); |
| 3895 |
if (ret) { |
| 3896 |
while (i-- > 0) |
| 3897 |
phy_driver_unregister(new_driver + i); |
| 3898 |
break; |
| 3899 |
} |
| 3900 |
} |
| 3901 |
return ret; |
| 3902 |
} |
| 3903 |
EXPORT_SYMBOL(phy_drivers_register); |
| 3904 |
|
| 3905 |
void phy_drivers_unregister(struct phy_driver *drv, int n) |
| 3906 |
{ |
| 3907 |
int i; |
| 3908 |
|
| 3909 |
for (i = 0; i < n; i++) |
| 3910 |
phy_driver_unregister(drv + i); |
| 3911 |
} |
| 3912 |
EXPORT_SYMBOL(phy_drivers_unregister); |
| 3913 |
|
| 3914 |
static struct phy_driver genphy_driver = { |
| 3915 |
.phy_id = 0xffffffff, |
| 3916 |
.phy_id_mask = 0xffffffff, |
| 3917 |
.name = "Generic PHY", |
| 3918 |
.get_features = genphy_read_abilities, |
| 3919 |
.suspend = genphy_suspend, |
| 3920 |
.resume = genphy_resume, |
| 3921 |
.set_loopback = genphy_loopback, |
| 3922 |
}; |
| 3923 |
|
| 3924 |
static const struct ethtool_phy_ops phy_ethtool_phy_ops = { |
| 3925 |
.get_sset_count = phy_ethtool_get_sset_count, |
| 3926 |
.get_strings = phy_ethtool_get_strings, |
| 3927 |
.get_stats = phy_ethtool_get_stats, |
| 3928 |
.get_plca_cfg = phy_ethtool_get_plca_cfg, |
| 3929 |
.set_plca_cfg = phy_ethtool_set_plca_cfg, |
| 3930 |
.get_plca_status = phy_ethtool_get_plca_status, |
| 3931 |
.start_cable_test = phy_start_cable_test, |
| 3932 |
.start_cable_test_tdr = phy_start_cable_test_tdr, |
| 3933 |
}; |
| 3934 |
|
| 3935 |
static const struct phylib_stubs __phylib_stubs = { |
| 3936 |
.hwtstamp_get = __phy_hwtstamp_get, |
| 3937 |
.hwtstamp_set = __phy_hwtstamp_set, |
| 3938 |
.get_phy_stats = __phy_ethtool_get_phy_stats, |
| 3939 |
.get_link_ext_stats = __phy_ethtool_get_link_ext_stats, |
| 3940 |
}; |
| 3941 |
|
| 3942 |
static void phylib_register_stubs(void) |
| 3943 |
{ |
| 3944 |
phylib_stubs = &__phylib_stubs; |
| 3945 |
} |
| 3946 |
|
| 3947 |
static void phylib_unregister_stubs(void) |
| 3948 |
{ |
| 3949 |
phylib_stubs = NULL; |
| 3950 |
} |
| 3951 |
|
| 3952 |
static int __init phy_init(void) |
| 3953 |
{ |
| 3954 |
int rc; |
| 3955 |
|
| 3956 |
rtnl_lock(); |
| 3957 |
ethtool_set_ethtool_phy_ops(&phy_ethtool_phy_ops); |
| 3958 |
phylib_register_stubs(); |
| 3959 |
rtnl_unlock(); |
| 3960 |
|
| 3961 |
rc = phy_caps_init(); |
| 3962 |
if (rc) |
| 3963 |
goto err_ethtool_phy_ops; |
| 3964 |
|
| 3965 |
features_init(); |
| 3966 |
|
| 3967 |
rc = phy_driver_register(&genphy_c45_driver, THIS_MODULE); |
| 3968 |
if (rc) |
| 3969 |
goto err_ethtool_phy_ops; |
| 3970 |
|
| 3971 |
rc = phy_driver_register(&genphy_driver, THIS_MODULE); |
| 3972 |
if (rc) |
| 3973 |
goto err_c45; |
| 3974 |
|
| 3975 |
return 0; |
| 3976 |
|
| 3977 |
err_c45: |
| 3978 |
phy_driver_unregister(&genphy_c45_driver); |
| 3979 |
err_ethtool_phy_ops: |
| 3980 |
rtnl_lock(); |
| 3981 |
phylib_unregister_stubs(); |
| 3982 |
ethtool_set_ethtool_phy_ops(NULL); |
| 3983 |
rtnl_unlock(); |
| 3984 |
|
| 3985 |
return rc; |
| 3986 |
} |
| 3987 |
|
| 3988 |
static void __exit phy_exit(void) |
| 3989 |
{ |
| 3990 |
phy_driver_unregister(&genphy_c45_driver); |
| 3991 |
phy_driver_unregister(&genphy_driver); |
| 3992 |
rtnl_lock(); |
| 3993 |
phylib_unregister_stubs(); |
| 3994 |
ethtool_set_ethtool_phy_ops(NULL); |
| 3995 |
rtnl_unlock(); |
| 3996 |
} |
| 3997 |
|
| 3998 |
subsys_initcall(phy_init); |
| 3999 |
module_exit(phy_exit); |