| 1 |
# SPDX-License-Identifier: GPL-2.0-only |
| 2 |
# |
| 3 |
# PHY Layer Configuration |
| 4 |
# |
| 5 |
|
| 6 |
config MDIO_BUS |
| 7 |
tristate "MDIO bus consumer layer" |
| 8 |
help |
| 9 |
MDIO bus consumer layer |
| 10 |
|
| 11 |
config PHYLINK |
| 12 |
tristate |
| 13 |
select PHYLIB |
| 14 |
select SWPHY |
| 15 |
help |
| 16 |
PHYlink models the link between the PHY and MAC, allowing fixed |
| 17 |
configuration links, PHYs, and Serdes links with MAC level |
| 18 |
autonegotiation modes. |
| 19 |
|
| 20 |
menuconfig PHYLIB |
| 21 |
tristate "PHY Device support and infrastructure" |
| 22 |
select MDIO_BUS |
| 23 |
help |
| 24 |
Ethernet controllers are usually attached to PHY |
| 25 |
devices. This option provides infrastructure for |
| 26 |
managing PHY devices. |
| 27 |
|
| 28 |
if PHYLIB |
| 29 |
|
| 30 |
config SWPHY |
| 31 |
bool |
| 32 |
|
| 33 |
config PHY_PACKAGE |
| 34 |
tristate |
| 35 |
|
| 36 |
config LED_TRIGGER_PHY |
| 37 |
bool "Support LED triggers for tracking link state" |
| 38 |
depends on LEDS_TRIGGERS |
| 39 |
help |
| 40 |
Adds support for a set of LED trigger events per-PHY. Link |
| 41 |
state change will trigger the events, for consumption by an |
| 42 |
LED class driver. There are triggers for each link speed currently |
| 43 |
supported by the PHY and also a one common "link" trigger as a |
| 44 |
logical-or of all the link speed ones. |
| 45 |
All these triggers are named according to the following pattern: |
| 46 |
<mii bus id>:<phy>:<speed> |
| 47 |
|
| 48 |
Where speed is in the form: |
| 49 |
<Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link |
| 50 |
for any speed known to the PHY. |
| 51 |
|
| 52 |
config OPEN_ALLIANCE_HELPERS |
| 53 |
bool |
| 54 |
|
| 55 |
config PHYLIB_LEDS |
| 56 |
def_bool OF |
| 57 |
depends on LEDS_CLASS=y || LEDS_CLASS=PHYLIB |
| 58 |
help |
| 59 |
When LED class support is enabled, phylib can automatically |
| 60 |
probe LED setting from device tree. |
| 61 |
|
| 62 |
config FIXED_PHY |
| 63 |
tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs" |
| 64 |
select SWPHY |
| 65 |
help |
| 66 |
Adds the platform "fixed" MDIO Bus to cover the boards that use |
| 67 |
PHYs that are not connected to the real MDIO bus. |
| 68 |
|
| 69 |
Currently tested with mpc866ads and mpc8349e-mitx. |
| 70 |
|
| 71 |
config RUST_PHYLIB_ABSTRACTIONS |
| 72 |
bool "Rust PHYLIB abstractions support" |
| 73 |
depends on RUST |
| 74 |
depends on PHYLIB=y |
| 75 |
help |
| 76 |
Adds support needed for PHY drivers written in Rust. It provides |
| 77 |
a wrapper around the C phylib core. |
| 78 |
|
| 79 |
config SFP |
| 80 |
tristate "SFP cage support" |
| 81 |
depends on I2C && PHYLINK |
| 82 |
depends on HWMON || HWMON=n |
| 83 |
select MDIO_I2C |
| 84 |
|
| 85 |
comment "MII PHY device drivers" |
| 86 |
|
| 87 |
config AS21XXX_PHY |
| 88 |
tristate "Aeonsemi AS21xxx PHYs" |
| 89 |
help |
| 90 |
Currently supports the Aeonsemi AS21xxx PHY. |
| 91 |
|
| 92 |
These are C45 PHYs 10G that require all a generic firmware. |
| 93 |
|
| 94 |
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1, |
| 95 |
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1, |
| 96 |
AS21210PB1 that all register with the PHY ID 0x7500 0x7500 |
| 97 |
before the firmware is loaded. |
| 98 |
|
| 99 |
config AIR_EN8811H_PHY |
| 100 |
tristate "Airoha EN8811H 2.5 Gigabit PHY" |
| 101 |
select PHY_COMMON_PROPS |
| 102 |
help |
| 103 |
Currently supports the Airoha EN8811H PHY. |
| 104 |
|
| 105 |
config AMD_PHY |
| 106 |
tristate "AMD and Altima PHYs" |
| 107 |
help |
| 108 |
Currently supports the AMD am79c874 and Altima AC101L. |
| 109 |
|
| 110 |
config MESON_GXL_PHY |
| 111 |
tristate "Amlogic Meson GXL Internal PHY" |
| 112 |
depends on ARCH_MESON || COMPILE_TEST |
| 113 |
select SMSC_PHY |
| 114 |
help |
| 115 |
Currently has a driver for the Amlogic Meson GXL Internal PHY |
| 116 |
|
| 117 |
config ADIN_PHY |
| 118 |
tristate "Analog Devices Industrial Ethernet PHYs" |
| 119 |
help |
| 120 |
Adds support for the Analog Devices Industrial Ethernet PHYs. |
| 121 |
Currently supports the: |
| 122 |
- ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY |
| 123 |
- ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit |
| 124 |
Ethernet PHY |
| 125 |
|
| 126 |
config ADIN1100_PHY |
| 127 |
tristate "Analog Devices Industrial Ethernet T1L PHYs" |
| 128 |
help |
| 129 |
Adds support for the Analog Devices Industrial T1L Ethernet PHYs. |
| 130 |
Currently supports the: |
| 131 |
- ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY |
| 132 |
|
| 133 |
config AMCC_QT2025_PHY |
| 134 |
tristate "AMCC QT2025 PHY" |
| 135 |
depends on RUST_PHYLIB_ABSTRACTIONS |
| 136 |
depends on RUST_FW_LOADER_ABSTRACTIONS |
| 137 |
help |
| 138 |
Adds support for the Applied Micro Circuits Corporation QT2025 PHY. |
| 139 |
|
| 140 |
source "drivers/net/phy/aquantia/Kconfig" |
| 141 |
|
| 142 |
config AX88796B_PHY |
| 143 |
tristate "Asix PHYs" |
| 144 |
help |
| 145 |
Currently supports the Asix Electronics PHY found in the X-Surf 100 |
| 146 |
AX88796B package. |
| 147 |
|
| 148 |
config AX88796B_RUST_PHY |
| 149 |
bool "Rust reference driver for Asix PHYs" |
| 150 |
depends on RUST_PHYLIB_ABSTRACTIONS && AX88796B_PHY |
| 151 |
help |
| 152 |
Uses the Rust reference driver for Asix PHYs (ax88796b_rust.ko). |
| 153 |
The features are equivalent. It supports the Asix Electronics PHY |
| 154 |
found in the X-Surf 100 AX88796B package. |
| 155 |
|
| 156 |
config BROADCOM_PHY |
| 157 |
tristate "Broadcom 54XX PHYs" |
| 158 |
select BCM_NET_PHYLIB |
| 159 |
select BCM_NET_PHYPTP if NETWORK_PHY_TIMESTAMPING |
| 160 |
depends on PTP_1588_CLOCK_OPTIONAL |
| 161 |
help |
| 162 |
Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, |
| 163 |
BCM5481, BCM54810 and BCM5482 PHYs. |
| 164 |
|
| 165 |
config BCM54140_PHY |
| 166 |
tristate "Broadcom BCM54140 PHY" |
| 167 |
depends on HWMON || HWMON=n |
| 168 |
select BCM_NET_PHYLIB |
| 169 |
select PHY_PACKAGE |
| 170 |
help |
| 171 |
Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY. |
| 172 |
|
| 173 |
This driver also supports the hardware monitoring of this PHY and |
| 174 |
exposes voltage and temperature sensors. |
| 175 |
|
| 176 |
config BCM63XX_PHY |
| 177 |
tristate "Broadcom 63xx SOCs internal PHY" |
| 178 |
depends on BCM63XX || COMPILE_TEST |
| 179 |
select BCM_NET_PHYLIB |
| 180 |
help |
| 181 |
Currently supports the 6348 and 6358 PHYs. |
| 182 |
|
| 183 |
config BCM7XXX_PHY |
| 184 |
tristate "Broadcom 7xxx SOCs internal PHYs" |
| 185 |
select BCM_NET_PHYLIB |
| 186 |
help |
| 187 |
Currently supports the BCM7366, BCM7439, BCM7445, and |
| 188 |
40nm and 65nm generation of BCM7xxx Set Top Box SoCs. |
| 189 |
|
| 190 |
config BCM84881_PHY |
| 191 |
tristate "Broadcom BCM84881 PHY" |
| 192 |
help |
| 193 |
Support the Broadcom BCM84881 PHY. |
| 194 |
|
| 195 |
config BCM87XX_PHY |
| 196 |
tristate "Broadcom BCM8706 and BCM8727 PHYs" |
| 197 |
help |
| 198 |
Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. |
| 199 |
|
| 200 |
config BCM_CYGNUS_PHY |
| 201 |
tristate "Broadcom Cygnus/Omega SoC internal PHY" |
| 202 |
depends on ARCH_BCM_IPROC || COMPILE_TEST |
| 203 |
depends on MDIO_BCM_IPROC |
| 204 |
select BCM_NET_PHYLIB |
| 205 |
help |
| 206 |
This PHY driver is for the 1G internal PHYs of the Broadcom |
| 207 |
Cygnus and Omega Family SoC. |
| 208 |
|
| 209 |
Currently supports internal PHY's used in the BCM11300, |
| 210 |
BCM11320, BCM11350, BCM11360, BCM58300, BCM58302, |
| 211 |
BCM58303 & BCM58305 Broadcom Cygnus SoCs. |
| 212 |
|
| 213 |
config BCM_NET_PHYLIB |
| 214 |
tristate |
| 215 |
|
| 216 |
config BCM_NET_PHYPTP |
| 217 |
tristate |
| 218 |
|
| 219 |
config CICADA_PHY |
| 220 |
tristate "Cicada PHYs" |
| 221 |
help |
| 222 |
Currently supports the cis8204 |
| 223 |
|
| 224 |
config CORTINA_PHY |
| 225 |
tristate "Cortina EDC CDR 10G Ethernet PHY" |
| 226 |
help |
| 227 |
Currently supports the CS4340 phy. |
| 228 |
|
| 229 |
config DAVICOM_PHY |
| 230 |
tristate "Davicom PHYs" |
| 231 |
help |
| 232 |
Currently supports dm9161e and dm9131 |
| 233 |
|
| 234 |
config ICPLUS_PHY |
| 235 |
tristate "ICPlus PHYs" |
| 236 |
help |
| 237 |
Currently supports the IP175C and IP1001 PHYs. |
| 238 |
|
| 239 |
config LXT_PHY |
| 240 |
tristate "Intel LXT PHYs" |
| 241 |
help |
| 242 |
Currently supports the lxt970, lxt971 |
| 243 |
|
| 244 |
config INTEL_XWAY_PHY |
| 245 |
tristate "Intel XWAY PHYs" |
| 246 |
help |
| 247 |
Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs. |
| 248 |
These PHYs are marked as standalone chips under the names |
| 249 |
PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel |
| 250 |
SoCs xRX200, xRX300, xRX330, xRX350 and xRX550. |
| 251 |
|
| 252 |
config LSI_ET1011C_PHY |
| 253 |
tristate "LSI ET1011C PHY" |
| 254 |
help |
| 255 |
Supports the LSI ET1011C PHY. |
| 256 |
|
| 257 |
config MARVELL_PHY |
| 258 |
tristate "Marvell Alaska PHYs" |
| 259 |
help |
| 260 |
Currently has a driver for the 88E1XXX |
| 261 |
|
| 262 |
config MARVELL_10G_PHY |
| 263 |
tristate "Marvell Alaska 10Gbit PHYs" |
| 264 |
help |
| 265 |
Support for the Marvell Alaska MV88X3310 and compatible PHYs. |
| 266 |
|
| 267 |
config MARVELL_88Q2XXX_PHY |
| 268 |
tristate "Marvell 88Q2XXX PHY" |
| 269 |
depends on HWMON || HWMON=n |
| 270 |
help |
| 271 |
Support for the Marvell 88Q2XXX 100/1000BASE-T1 Automotive Ethernet |
| 272 |
PHYs. |
| 273 |
|
| 274 |
config MARVELL_88X2222_PHY |
| 275 |
tristate "Marvell 88X2222 PHY" |
| 276 |
help |
| 277 |
Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet |
| 278 |
Transceiver. |
| 279 |
|
| 280 |
config MAXLINEAR_GPHY |
| 281 |
tristate "Maxlinear Ethernet PHYs" |
| 282 |
select POLYNOMIAL if HWMON |
| 283 |
depends on HWMON || HWMON=n |
| 284 |
help |
| 285 |
Support for the Maxlinear GPY115, GPY211, GPY212, GPY215, |
| 286 |
GPY241, GPY245 PHYs. |
| 287 |
|
| 288 |
config MAXLINEAR_86110_PHY |
| 289 |
tristate "MaxLinear MXL86110 PHY support" |
| 290 |
help |
| 291 |
Support for the MaxLinear MXL86110 Gigabit Ethernet |
| 292 |
Physical Layer transceiver. |
| 293 |
The MXL86110 is commonly used in networking equipment such as |
| 294 |
routers, switches, and embedded systems, providing the |
| 295 |
physical interface for 10/100/1000 Mbps Ethernet connections |
| 296 |
over copper media. |
| 297 |
If you are using a board with the MXL86110 PHY connected to your |
| 298 |
Ethernet MAC, you should enable this option. |
| 299 |
|
| 300 |
source "drivers/net/phy/mediatek/Kconfig" |
| 301 |
|
| 302 |
config MICREL_PHY |
| 303 |
tristate "Micrel PHYs" |
| 304 |
depends on PTP_1588_CLOCK_OPTIONAL |
| 305 |
select PHY_PACKAGE |
| 306 |
help |
| 307 |
Supports the KSZ8xxx, KSZ9xxx, and LAN88xx families of Micrel/Microchip PHYs. |
| 308 |
|
| 309 |
config MICROCHIP_T1S_PHY |
| 310 |
tristate "Microchip 10BASE-T1S Ethernet PHYs" |
| 311 |
help |
| 312 |
Currently supports the LAN8670/1/2 Rev.B1/C1/C2/D0 and |
| 313 |
LAN8650/1 Rev.B0/B1 Internal PHYs. |
| 314 |
|
| 315 |
config MICROCHIP_PHY |
| 316 |
tristate "Microchip PHYs" |
| 317 |
help |
| 318 |
Supports the LAN88XX PHYs. |
| 319 |
|
| 320 |
config MICROCHIP_T1_PHY |
| 321 |
tristate "Microchip T1 PHYs" |
| 322 |
select MICROCHIP_PHY_RDS_PTP if NETWORK_PHY_TIMESTAMPING |
| 323 |
depends on PTP_1588_CLOCK_OPTIONAL |
| 324 |
help |
| 325 |
Supports the LAN8XXX PHYs. |
| 326 |
|
| 327 |
config MICROCHIP_PHY_RDS_PTP |
| 328 |
tristate |
| 329 |
help |
| 330 |
Currently supports LAN887X T1 PHY |
| 331 |
|
| 332 |
config MICROSEMI_PHY |
| 333 |
tristate "Microsemi PHYs" |
| 334 |
depends on MACSEC || MACSEC=n |
| 335 |
depends on PTP_1588_CLOCK_OPTIONAL || !NETWORK_PHY_TIMESTAMPING |
| 336 |
select CRYPTO_LIB_AES if MACSEC |
| 337 |
select PHY_PACKAGE |
| 338 |
help |
| 339 |
Currently supports VSC8514, VSC8530, VSC8531, VSC8540 and VSC8541 PHYs |
| 340 |
|
| 341 |
config MOTORCOMM_PHY |
| 342 |
tristate "Motorcomm PHYs" |
| 343 |
help |
| 344 |
Enables support for Motorcomm network PHYs. |
| 345 |
Currently supports YT85xx Gigabit Ethernet PHYs. |
| 346 |
|
| 347 |
config NATIONAL_PHY |
| 348 |
tristate "National Semiconductor PHYs" |
| 349 |
help |
| 350 |
Currently supports the DP83865 PHY. |
| 351 |
|
| 352 |
config NXP_CBTX_PHY |
| 353 |
tristate "NXP 100BASE-TX PHYs" |
| 354 |
help |
| 355 |
Support the 100BASE-TX PHY integrated on the SJA1110 automotive |
| 356 |
switch family. |
| 357 |
|
| 358 |
config NXP_C45_TJA11XX_PHY |
| 359 |
tristate "NXP C45 TJA11XX PHYs" |
| 360 |
depends on PTP_1588_CLOCK_OPTIONAL |
| 361 |
depends on MACSEC || !MACSEC |
| 362 |
help |
| 363 |
Enable support for NXP C45 TJA11XX PHYs. |
| 364 |
Currently supports the TJA1103, TJA1104, TJA1120 and TJA1121 PHYs. |
| 365 |
|
| 366 |
config NXP_TJA11XX_PHY |
| 367 |
tristate "NXP TJA11xx PHYs support" |
| 368 |
depends on HWMON |
| 369 |
help |
| 370 |
Currently supports the NXP TJA1100, TJA1101 and TJA1102 PHYs. |
| 371 |
|
| 372 |
config NCN26000_PHY |
| 373 |
tristate "Onsemi 10BASE-T1S Ethernet PHY" |
| 374 |
help |
| 375 |
Adds support for the onsemi 10BASE-T1S Ethernet PHY. |
| 376 |
Currently supports the NCN26000 10BASE-T1S Industrial PHY |
| 377 |
with MII interface. |
| 378 |
|
| 379 |
source "drivers/net/phy/qcom/Kconfig" |
| 380 |
|
| 381 |
config QSEMI_PHY |
| 382 |
tristate "Quality Semiconductor PHYs" |
| 383 |
help |
| 384 |
Currently supports the qs6612 |
| 385 |
|
| 386 |
source "drivers/net/phy/realtek/Kconfig" |
| 387 |
|
| 388 |
config RENESAS_PHY |
| 389 |
tristate "Renesas PHYs" |
| 390 |
help |
| 391 |
Supports the Renesas PHYs uPD60620 and uPD60620A. |
| 392 |
|
| 393 |
config ROCKCHIP_PHY |
| 394 |
tristate "Rockchip Ethernet PHYs" |
| 395 |
help |
| 396 |
Currently supports the integrated Ethernet PHY. |
| 397 |
|
| 398 |
config SMSC_PHY |
| 399 |
tristate "SMSC PHYs" |
| 400 |
select CRC16 |
| 401 |
help |
| 402 |
Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs |
| 403 |
|
| 404 |
config STE10XP |
| 405 |
tristate "STMicroelectronics STe10Xp PHYs" |
| 406 |
help |
| 407 |
This is the driver for the STe100p and STe101p PHYs. |
| 408 |
|
| 409 |
config TERANETICS_PHY |
| 410 |
tristate "Teranetics PHYs" |
| 411 |
help |
| 412 |
Currently supports the Teranetics TN2020 |
| 413 |
|
| 414 |
config DP83822_PHY |
| 415 |
tristate "Texas Instruments DP83822/825/826 PHYs" |
| 416 |
help |
| 417 |
Supports the DP83822, DP83825I, DP83825CM, DP83825CS, DP83825S, |
| 418 |
DP83826C and DP83826NC PHYs. |
| 419 |
|
| 420 |
config DP83TC811_PHY |
| 421 |
tristate "Texas Instruments DP83TC811 PHY" |
| 422 |
help |
| 423 |
Supports the DP83TC811 PHY. |
| 424 |
|
| 425 |
config DP83848_PHY |
| 426 |
tristate "Texas Instruments DP83848 PHY" |
| 427 |
help |
| 428 |
Supports the DP83848 PHY. |
| 429 |
|
| 430 |
config DP83867_PHY |
| 431 |
tristate "Texas Instruments DP83867 Gigabit PHY" |
| 432 |
help |
| 433 |
Currently supports the DP83867 PHY. |
| 434 |
|
| 435 |
config DP83869_PHY |
| 436 |
tristate "Texas Instruments DP83869 Gigabit PHY" |
| 437 |
help |
| 438 |
Currently supports the DP83869 PHY. This PHY supports copper and |
| 439 |
fiber connections. |
| 440 |
|
| 441 |
config DP83TD510_PHY |
| 442 |
tristate "Texas Instruments DP83TD510 Ethernet 10Base-T1L PHY" |
| 443 |
help |
| 444 |
Support for the DP83TD510 Ethernet 10Base-T1L PHY. This PHY supports |
| 445 |
a 10M single pair Ethernet connection for up to 1000 meter cable. |
| 446 |
|
| 447 |
config DP83TG720_PHY |
| 448 |
tristate "Texas Instruments DP83TG720 Ethernet 1000Base-T1 PHY" |
| 449 |
select OPEN_ALLIANCE_HELPERS |
| 450 |
help |
| 451 |
The DP83TG720S-Q1 is an automotive Ethernet physical layer |
| 452 |
transceiver compliant with IEEE 802.3bp and Open Alliance |
| 453 |
standards. It supports key functions necessary for |
| 454 |
transmitting and receiving data over both unshielded and |
| 455 |
shielded single twisted-pair cables. This device offers |
| 456 |
flexible xMII interface options, including support for both |
| 457 |
RGMII and SGMII MAC interfaces. It's suitable for applications |
| 458 |
requiring high-speed data transmission in automotive |
| 459 |
networking environments. |
| 460 |
|
| 461 |
config VITESSE_PHY |
| 462 |
tristate "Vitesse PHYs" |
| 463 |
help |
| 464 |
Currently supports the vsc8244 |
| 465 |
|
| 466 |
config XILINX_GMII2RGMII |
| 467 |
tristate "Xilinx GMII2RGMII converter driver" |
| 468 |
help |
| 469 |
This driver support xilinx GMII to RGMII IP core it provides |
| 470 |
the Reduced Gigabit Media Independent Interface(RGMII) between |
| 471 |
Ethernet physical media devices and the Gigabit Ethernet controller. |
| 472 |
|
| 473 |
endif # PHYLIB |