Debian Codegraph @

texmf-dist/doc/latex/circuit-macros/examples/extras/Shaky.m4

raw
1 .PS
2 # Shaky.m4
3 gen_init
4 NeedDpicTools
5 divert(-1)
6 `An attempt to draw shaky hand-drawn lines'
7
8 `shakyline(linespec,type,shake=val,[shakevals])
9 Draw a line with a tremor
10 arg3: shake parameter (default 1)
11 arg4=normal(0,1) perturbations used if given'
12 define(`shakyline',
13 `rpoint_(ifelse(`$1',,`to rvec_(linewid,0)',`$1'))
14 L_start_: last line.start
15 L_end_: last line.end
16 [ Start: L_start_
17 End: L_end_
18 llen = distance(Start,End)
19 npts = round_(llen/linewid*4)
20 pushkey_(`$3',shake,1)dnl
21 sval = m4shake*llen/npts/8
22 if "$4"=="" then { randn(d,npts-1,0,sval) }\
23 else { for i=1 to npts-1 do { d[i] = $4[i]*sval) }}
24 P[0]: Start
25 for i=1 to npts-1 do { P[i]: i/npts between Start and End + vec_(0,d[i]) }
26 P[npts]: End
27 spline ifdpic(ifelse(`$2',,ctension_)) $2 from P[0] to P[1]
28 for i=2 to npts do { continue to P[i] } popdef(`m4shake')
29 ] with .Start at L_start_; move to L_end_')
30
31 `shakyarc(arcspec,type,shake=val,[shakevals])
32 Draw an arc with a tremor
33 arg3: s=shake parameter (default 1)
34 arg4=normal(0,1) perturbations used if given'
35 define(`shakyarc',
36 `arc invis $1
37 A_start_: last arc.start
38 A_end_: last arc.end
39 A_C_: last arc.c
40 [ Start: A_start_
41 End: A_end_
42 C: A_C_
43 as = atan2(Start.y-C.y,Start.x-C.x)
44 ae = atan2(End.y-C.y,End.x-C.x)
45 ar = distance(Start,C)
46 llen = abs(ar*(ae-as))
47 npts = round_(llen/linewid*4)
48 pushkey_($3,shake,1)dnl
49 sval = m4shake*llen/npts/8
50 if "$4"=="" then { randn(d,npts-1,0,sval) }\
51 else { for i=1 to npts-1 do { d[i] = $4[i]*sval }}
52 P[0]: Start
53 for i=1 to npts-1 do { P[i]: C + (rect_(ar+d[i],as+i/npts*(ae-as))) }
54 P[npts]: End
55 spline ifdpic(ifelse(`$2',,ctension_)) $2 from P[0] to P[1]
56 for i=2 to npts do { continue to P[i] } popdef(`m4shake')
57 ] with .Start at last arc.start; move to last arc.end')
58
59 `shakyfitcurve(V,n,linetype,
60 m (default 0),shake=val,[shakevals])
61 Like fitcurve but the control points
62 are perturbed
63 arg5: s=shake parameter (default 1)
64 arg6=normal(0,1) perturbations used if given'
65 define(`shakyfitcurve',`
66 [ m4fn = ifelse(`$2',,2,`$2'); m4fm = ifelse(`$4',,0,`$4')
67 pushkey_($5,shake,1)dnl
68 if "$6"=="" then { randn(d,2*(m4fn-m4fm-1),0,m4shake) }\
69 else { for i=1 to 2*(m4fn-m4fm-1) do { d[i] = $6[i]*m4shake }}
70 M4PP_[0]: `$1'[m4fm]
71 for i=m4fm+1 to m4fn-1 do { M4PP_[i-m4fm]: `$1'[i] dnl
72 +(d[2*(i-m4fm-1)+1],d[2*(i-m4fm-1)+2])\
73 *distance(M4PP_[i-m4fm-1],`$1'[i])/16 }
74 M4PP_[m4fn-m4fm]: `$1'[m4fn]; End: M4PP_[m4fn-m4fm]
75 fitcurve(M4PP_,m4fn-m4fm) popdef(`m4shake')
76 ] with .M4PP_[0] at `$1'[ifelse(`$4',,0,`$4')]; move to last [].End ')
77
78
79 divert(0)
80
81 P1: [
82 linethick = 2.5
83 round(,,colored "gray")
84 nl = 10
85 for i=0 to nl do {
86 shakyline(right 6/nl up 2*(2*pmod(i,2)-1),,shake=2)
87 {sprintf("%g",2-i/nl*2) at 1/2 between L_start_ and L_end_ }
88 round(,,colored "gray") }
89 ]
90
91 P2: [
92 linethick = 2.5
93 na = 3
94 arcrad = 1
95 for i=1 to na do {
96 shakyarc(,colored "gray",shake=2)
97 }
98 ] with .nw at last [].sw +(0,-1)
99
100 P3: [
101 linethick = 2.5
102 na = 3
103 arcrad = 2
104 for i=1 to na do {
105 shakyarc(,colored "gray",shake=2)
106 }
107 ] with .w at last [].e +(1,0)
108 P4: [
109 n = 0
110 for a=0 to 359 by 30 do { V[n]: (Rect_(1,a)); n+=1 }
111 V[n]: V[0]
112 shakyfitcurve(V,n,,,shake=1)
113 ] with .nw at P2.sw + (0,-0.5)
114
115 .PE