| 1 |
.PS |
| 2 |
# Chuck.m4 |
| 3 |
gen_init s_init(Views) sinclude(tst.dim) |
| 4 |
# |
| 5 |
################################################################# |
| 6 |
divert(-1) |
| 7 |
|
| 8 |
`r_box(angle,pos,string) |
| 9 |
Rotated text on a white background |
| 10 |
(requires pstricks)' |
| 11 |
define(`r_box', |
| 12 |
`ifpstricks(`M4tmp: ifelse(`$2',,Here,`$2') |
| 13 |
command sprintf("\rput{%g}(%g,%g){",`$1',crl(M4tmp.x),crl(M4tmp.y)) |
| 14 |
f_box(`$3') at Orig |
| 15 |
command "}%"')') |
| 16 |
define(`crl',`int(`($1)'/scale*1000000)/1000000') |
| 17 |
|
| 18 |
`r_dimen(linespec,offset,label,tic offset,<->,pos) |
| 19 |
dimension_ with rotated text on white background' |
| 20 |
define(`r_dimen', |
| 21 |
`M4tmp: dimension_(`$1',`$2',,,`$4',`$5') |
| 22 |
r_box(rp_ang*rtod_,ifelse(`$6',,M4tmp+vec_(0,`$2'),`$6'),`$3')') |
| 23 |
|
| 24 |
`ctrline(linespec,len) |
| 25 |
Centerline' |
| 26 |
define(`cdashl',0.1*scale) |
| 27 |
define(`cgapl',0.03*scale) |
| 28 |
define(`ctrline',`rpoint_(ifelse(`$1',,`to rvec_(linewid,0)',`$1')) |
| 29 |
define(`m4h',ifelse(`$2',,1*scale,`$2'))dnl |
| 30 |
m4n = int(rp_len/2/(m4h))*2+1 |
| 31 |
for i=1 to m4n do { |
| 32 |
line to rvec_(rp_len/m4n/2-cdashl/2-cgapl,0) |
| 33 |
move to rvec_(cgapl,0); line to rvec_(cdashl,0); move to rvec_(cgapl,0) |
| 34 |
line thick dimensionth to rvec_(rp_len/m4n/2-cdashl/2-cgapl,0) } ') |
| 35 |
|
| 36 |
`ctrarcr(pos,radius,startang,endang,len) |
| 37 |
Arc cr centerline' |
| 38 |
define(`ctrarcr',`dnl |
| 39 |
define(`m5h',ifelse(`$5',,1*scale,`$5'))dnl |
| 40 |
rp_len = abs((`$2')*(`$4'-(`$3'))) |
| 41 |
m5n = int(rp_len/2/(m5h))*2+1 |
| 42 |
m5a = (rp_len/m5n/2-cdashl/2-cgapl)/(`$2') |
| 43 |
m5s = cdashl/(`$2') |
| 44 |
m5sa = `$3' |
| 45 |
for m4irr=1 to m5n do { |
| 46 |
arc from `$1'+(rect_(`$2',m5sa)) to `$1'+(rect_(`$2',m5sa+m5a)) \ |
| 47 |
with .c at `$1' |
| 48 |
m5sa = m5sa+m5a+cgapl/(`$2') |
| 49 |
arc from `$1'+(rect_(`$2',m5sa)) to `$1'+(rect_(`$2',m5sa+m5s)) \ |
| 50 |
with .c at `$1' |
| 51 |
m5sa = m5sa+m5s+cgapl/(`$2') |
| 52 |
arc from `$1'+(rect_(`$2',m5sa)) to `$1'+(rect_(`$2',m5sa+m5a)) \ |
| 53 |
with .c at `$1' |
| 54 |
m5sa = m5sa+m5a |
| 55 |
} ') |
| 56 |
|
| 57 |
divert(0)dnl |
| 58 |
################################################################# |
| 59 |
|
| 60 |
scale = 25.4*2 |
| 61 |
tic = 3.6bp__ |
| 62 |
|
| 63 |
command "{\sf" |
| 64 |
|
| 65 |
define(`visible_thick',`linethick_(visibleth)') |
| 66 |
define(`hidden_thick',`linethick_(hiddenth)') |
| 67 |
define(`dimension_thick',`linethick_(dimensionth) |
| 68 |
arrowwid = 1.5*arrowwid; arrowht = 1.5*arrowht; ') |
| 69 |
|
| 70 |
d1 = 230 |
| 71 |
d2 = 204 |
| 72 |
d3 = 140 |
| 73 |
|
| 74 |
visibleth = 1.2 |
| 75 |
dimensionth = 0.4 |
| 76 |
hiddenth = dimensionth |
| 77 |
|
| 78 |
Orig: Here |
| 79 |
visible_thick |
| 80 |
D3: circle diam d3 at Orig |
| 81 |
D2: circle diam d2 at Orig |
| 82 |
|
| 83 |
rr = d1/2 |
| 84 |
r = 40 |
| 85 |
h = 110/2 |
| 86 |
thet = asin((h+r)/(rr+r)) |
| 87 |
X1: rect_(rr,thet) |
| 88 |
P1: rect_(rr+r,thet) |
| 89 |
|
| 90 |
dimension_thick |
| 91 |
cross(at (P1.x,-P1.y)) |
| 92 |
cross(at (-P1.x,P1.y)) |
| 93 |
|
| 94 |
# Top outer visible line |
| 95 |
visible_thick |
| 96 |
# top arcs |
| 97 |
arc ccw from (-P1.x,h) to (-X1.x,X1.y) with .c at (-P1.x,P1.y) |
| 98 |
arc cw to X1 with .c at Orig |
| 99 |
arc ccw from X1 to (P1.x,h) with .c at P1 |
| 100 |
# right end |
| 101 |
line from (P1.x,h) to (305/2,h) then to (305/2,32/2) then left 40-3 |
| 102 |
arc ccw rad 3 |
| 103 |
line down 32-2*3 |
| 104 |
arc ccw rad 3 |
| 105 |
dimension_thick { |
| 106 |
r_dimen(up 32 with .c at (305/2-5,0),0,32) |
| 107 |
arrow <- up 8 right 8 then right 4 from last arc.sw |
| 108 |
"3$\,$R" ljust |
| 109 |
r_dimen(up h*2 at (305/2,0),-10,110) |
| 110 |
}; visible_thick |
| 111 |
line right 40-3 then to (305/2,-h) then to (P1.x,-h) |
| 112 |
# bottom arcs |
| 113 |
arc ccw to (X1.x,-X1.y) with .c at P1.x,-P1.y |
| 114 |
arc cw to (-X1.x,-X1.y) with .c at Orig |
| 115 |
arc ccw to (-P1.x,-h) with .c at (-P1.x,-P1.y) |
| 116 |
# left end |
| 117 |
line from (-P1.x,-h) to (-305/2,-h) then to (-305/2,-25/2) then right 25 |
| 118 |
down; arc ccw rad 3 |
| 119 |
line right 40-25-2*3 |
| 120 |
arc ccw rad 3 |
| 121 |
line up 25 |
| 122 |
{R: line invis down 10 at (2nd last line,last line) } |
| 123 |
arc ccw rad 3 |
| 124 |
line left 40-25-2*3 |
| 125 |
arc ccw rad 3 |
| 126 |
line to (-305/2,25/2) then to (-305/2,h) then to (-P1.x,h) |
| 127 |
|
| 128 |
dimension_thick |
| 129 |
# centre |
| 130 |
ctrline(right 305-30 with .c at Orig,60) |
| 131 |
ctrline(up d1+10 with .c at Orig,) |
| 132 |
|
| 133 |
{BX: box invis ht 25+2*3 wid 40-25 rad 3 with .w at (-305/2+25,0)} |
| 134 |
Q: line invis from BX.n to BX.s; R: line invis from BX.se up 10 left 10 |
| 135 |
X: Intersect_(Q,R) |
| 136 |
line <-> from BX.se to X then to (X.x,-X.y) then to BX.nw |
| 137 |
r_box(90,BX,```3$\,$R''') |
| 138 |
|
| 139 |
# Drill centres |
| 140 |
D[1]: 35,sqrt(85^2-35^2) |
| 141 |
D[2]: -D[1].x,D[1].y |
| 142 |
D[3]: -D[1].x,-D[1].y |
| 143 |
D[4]: D[1].x,-D[1].y |
| 144 |
ctrline(from D[3] to D[1] chop 15) |
| 145 |
ctrline(to rvec_(2*15,0)) |
| 146 |
ctrline(from D[3]+vec_(-15,0) to D[3]+vec_(15,0)) |
| 147 |
ctrline(from D[2] to D[4] chop 15) |
| 148 |
ctrline(to rvec_(2*15,0)) |
| 149 |
ctrline(from D[2]+vec_(-15,0) to D[2]+vec_(15,0)) |
| 150 |
visible_thick |
| 151 |
for i=1 to 4 do { |
| 152 |
circle diam 16 at D[i] |
| 153 |
for j = 0 to 7 do { arcr(D[i],23/2,j/8*twopi_,(j+3/4)/8*twopi_) ccw } |
| 154 |
} |
| 155 |
|
| 156 |
hidden_thick |
| 157 |
for s=-1 to 1 by 2 do { |
| 158 |
line dashed from (-305/2,s*h) to (305/2,s*h) |
| 159 |
line dashed from (-305/2,s*30.6) to (305/2,s*30.6) |
| 160 |
line dashed from (-305/2,s*21.1) to (305/2,s*21.1) |
| 161 |
# line dashed from (-305/2+25+2,s*21.1) to (305/2,s*21.1) |
| 162 |
line dashed dashwid/2 from (-305/2+25,s*25/2) down -s*(40/2-25/2-2); |
| 163 |
if s<0 then { arc dashed dashwid/4 ccw rad 2 } \ |
| 164 |
else { up; arc dashed dashwid/4 cw rad 2 } |
| 165 |
line dashed to ((305/2,0),Here) |
| 166 |
for k = -1 to 1 by 2 do { |
| 167 |
move to (k*305/2,s*(30.6+10)) |
| 168 |
{ dashline(from Here+(0,s*9.5/2) right -k*16,,dashwid/2) |
| 169 |
dashline(right -k*9.5/2/2 up -s*9.5/2,,dashwid/3) |
| 170 |
dashline(left -k*9.5/2/2 up -s*9.5/2,,dashwid/3) |
| 171 |
dashline(left -k*16,,dashwid/2) |
| 172 |
dashline(from Here+(-k*16,0) up s*9.5,,dashwid/2.5) } |
| 173 |
{ dashline(from Here+(0,s*11/2) right -k*36.5,,dashwid/2) |
| 174 |
dashline(right -k*11/2/2 up -s*11/2,,dashwid/3) |
| 175 |
dashline(left -k*11/2/2 up -s*11/2,,dashwid/3) |
| 176 |
dashline(left -k*36.5,,dashwid/2) |
| 177 |
dashline(from Here+(-k*36.5,0) up s*11,,dashwid/2.5) } |
| 178 |
{ dashline(from Here+(0,s*13/2) right -k*32,,dashwid/2) |
| 179 |
dashline(down s*13,,dashwid/2) |
| 180 |
dashline(left -k*32,,dashwid/2) } |
| 181 |
ctrline(right -k*20 chop -3 chop 0); ctrline(right -k*20 chop 0 chop -3) |
| 182 |
} |
| 183 |
} |
| 184 |
|
| 185 |
dimension_thick |
| 186 |
# bottom |
| 187 |
dimension_(from (-305/2,-h) to (305/2,-h),-(rr*1.1-h),"305",20pt__) |
| 188 |
# outer radii |
| 189 |
r_dimen(from (-P1.x,P1.y) down 40*cosd(30) right 40*sind(30),0,40,,->) |
| 190 |
r_dimen(from (P1.x,-P1.y)+(Rect_(40,120)) \ |
| 191 |
down 40*cosd(30) right 40*sind(30),0,40,,<-) |
| 192 |
# main diameter |
| 193 |
r_dimen(from (Rect_(rr,180+50)) to (Rect_(rr,50)),,230,,,(Rect_(50,50))) |
| 194 |
# inner circles |
| 195 |
r_dimen(from (Rect_(d2/2,180+25)) to (Rect_(d2/2,25)),,204,,,(Rect_(25,25))) |
| 196 |
r_dimen(from (Rect_(d3/2,180-12)) to (Rect_(d3/2,-12)),,140,,,(Rect_(25,-12))) |
| 197 |
|
| 198 |
# bolt hole placement diameter |
| 199 |
r_dimen(from Orig to (Rect_(85,-43)),,``85$\,$R'',,->,(Rect_(20,-43))) |
| 200 |
# left slot |
| 201 |
r_dimen(from (-305/2+6,-25/2) up 25,0,25) |
| 202 |
r_dimen(from (-305/2,-26) right 40,0,40) |
| 203 |
line from last line.end to (last line.end.x,BX.s.y) chop -tic chop 0 |
| 204 |
r_dimen(from (-305/2,26) right 25,0,25) |
| 205 |
line from last line.end to (last line.end.x,BX.n.y) chop -tic chop 0 |
| 206 |
# right slot |
| 207 |
r_dimen(from (305/2-40,-32/2-10) right 40,0,40) |
| 208 |
line from (305/2-40,-32/2) down 10+tic |
| 209 |
# drill-holes |
| 210 |
for i=1 to 4 do { |
| 211 |
ctrarcr(Orig,85,atan2(D[i].y,D[i].x)-10*dtor_,atan2(D[i].y,D[i].x)+10*dtor_) |
| 212 |
} |
| 213 |
ctrarcr(Orig,85,atan2(D[4].y,D[4].x)+10*dtor_,atan2(D[4].y,D[4].x)+25*dtor_) |
| 214 |
ctrline(up 30 at D[3]) |
| 215 |
ctrline(up 30 at D[4]) |
| 216 |
r_dimen(from D[3]+(0,-14) right 35,0,35) |
| 217 |
r_dimen(from (0,D[3].y-14) right 35,0,35) |
| 218 |
|
| 219 |
command "}%" |
| 220 |
.PE |