Debian Codegraph @

arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (C) 2012 Marek Vasut <[email protected]>
4 */
5
6 /dts-v1/;
7 #include "imx28.dtsi"
8
9 / {
10 model = "SchulerControl GmbH, SC SPS 1";
11 compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
12
13 memory@40000000 {
14 device_type = "memory";
15 reg = <0x40000000 0x08000000>;
16 };
17
18 reg_usb0_vbus: regulator-0 {
19 compatible = "regulator-fixed";
20 regulator-name = "usb0_vbus";
21 regulator-min-microvolt = <5000000>;
22 regulator-max-microvolt = <5000000>;
23 gpio = <&gpio3 9 0>;
24 };
25
26 leds {
27 compatible = "gpio-leds";
28 status = "okay";
29
30 led-1 {
31 label = "sps1-1:yellow:user";
32 gpios = <&gpio0 6 0>;
33 linux,default-trigger = "heartbeat";
34 };
35
36 led-2 {
37 label = "sps1-2:red:user";
38 gpios = <&gpio0 3 0>;
39 linux,default-trigger = "heartbeat";
40 };
41
42 led-3 {
43 label = "sps1-3:red:user";
44 gpios = <&gpio0 0 0>;
45 linux,default-trigger = "heartbeat";
46 };
47
48 };
49 };
50
51 &auart0 {
52 pinctrl-names = "default";
53 pinctrl-0 = <&auart0_pins_a>;
54 status = "okay";
55 };
56
57 &duart {
58 pinctrl-names = "default";
59 pinctrl-0 = <&duart_pins_a>;
60 status = "okay";
61 };
62
63 &i2c0 {
64 pinctrl-names = "default";
65 pinctrl-0 = <&i2c0_pins_a>;
66 status = "okay";
67
68 rtc: rtc@51 {
69 compatible = "nxp,pcf8563";
70 reg = <0x51>;
71 };
72
73 eeprom: eeprom@52 {
74 compatible = "atmel,24c64";
75 reg = <0x52>;
76 pagesize = <32>;
77 };
78 };
79
80 &mac0 {
81 phy-mode = "rmii";
82 pinctrl-names = "default";
83 pinctrl-0 = <&mac0_pins_a>;
84 status = "okay";
85 };
86
87 &mac1 {
88 phy-mode = "rmii";
89 pinctrl-names = "default";
90 pinctrl-0 = <&mac1_pins_a>;
91 status = "okay";
92 };
93
94 &pinctrl {
95 pinctrl-names = "default";
96 pinctrl-0 = <&hog_pins_a>;
97
98 hog_pins_a: hog-gpios@0 {
99 reg = <0>;
100 fsl,pinmux-ids = <
101 MX28_PAD_GPMI_D00__GPIO_0_0
102 MX28_PAD_GPMI_D03__GPIO_0_3
103 MX28_PAD_GPMI_D06__GPIO_0_6
104 >;
105 fsl,drive-strength = <MXS_DRIVE_4mA>;
106 fsl,voltage = <MXS_VOLTAGE_HIGH>;
107 fsl,pull-up = <MXS_PULL_DISABLE>;
108 };
109 };
110
111 &ssp0 {
112 compatible = "fsl,imx28-mmc";
113 pinctrl-names = "default";
114 pinctrl-0 = <&mmc0_4bit_pins_a>;
115 bus-width = <4>;
116 status = "okay";
117 };
118
119 &ssp2 {
120 #address-cells = <1>;
121 #size-cells = <0>;
122 compatible = "fsl,imx28-spi";
123 pinctrl-names = "default";
124 pinctrl-0 = <&spi2_pins_a>;
125 status = "okay";
126
127 flash: flash@0 {
128 #address-cells = <1>;
129 #size-cells = <1>;
130 compatible = "everspin,mr25h256", "mr25h256";
131 spi-max-frequency = <40000000>;
132 reg = <0>;
133 };
134 };
135
136 &usb0 {
137 vbus-supply = <&reg_usb0_vbus>;
138 pinctrl-names = "default";
139 pinctrl-0 = <&usb0_pins_b>;
140 status = "okay";
141 };
142
143 &usbphy0 {
144 status = "okay";
145 };