| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright 2012 Armadeus Systems - <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/* APF28Dev is a docking board for the APF28 SOM */ |
| 7 |
#include "imx28-apf28.dts" |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "Armadeus Systems APF28Dev docking/development board"; |
| 11 |
compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28"; |
| 12 |
|
| 13 |
reg_usb0_vbus: regulator-0 { |
| 14 |
compatible = "regulator-fixed"; |
| 15 |
regulator-name = "usb0_vbus"; |
| 16 |
regulator-min-microvolt = <5000000>; |
| 17 |
regulator-max-microvolt = <5000000>; |
| 18 |
gpio = <&gpio1 23 1>; |
| 19 |
enable-active-high; |
| 20 |
}; |
| 21 |
|
| 22 |
reg_can0_vcc: regulator-1 { |
| 23 |
compatible = "regulator-fixed"; |
| 24 |
regulator-name = "can0_vcc"; |
| 25 |
regulator-min-microvolt = <5000000>; |
| 26 |
regulator-max-microvolt = <5000000>; |
| 27 |
}; |
| 28 |
|
| 29 |
leds { |
| 30 |
compatible = "gpio-leds"; |
| 31 |
|
| 32 |
user { |
| 33 |
label = "Heartbeat"; |
| 34 |
gpios = <&gpio0 21 0>; |
| 35 |
linux,default-trigger = "heartbeat"; |
| 36 |
}; |
| 37 |
}; |
| 38 |
|
| 39 |
backlight { |
| 40 |
compatible = "pwm-backlight"; |
| 41 |
|
| 42 |
pwms = <&pwm 3 191000 0>; |
| 43 |
brightness-levels = <0 4 8 16 32 64 128 255>; |
| 44 |
default-brightness-level = <6>; |
| 45 |
}; |
| 46 |
|
| 47 |
gpio-keys { |
| 48 |
compatible = "gpio-keys"; |
| 49 |
|
| 50 |
user-button { |
| 51 |
label = "User button"; |
| 52 |
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; |
| 53 |
linux,code = <0x100>; |
| 54 |
wakeup-source; |
| 55 |
}; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
&auart0 { |
| 60 |
pinctrl-names = "default"; |
| 61 |
pinctrl-0 = <&auart0_pins_a>; |
| 62 |
uart-has-rtscts; |
| 63 |
status = "okay"; |
| 64 |
}; |
| 65 |
|
| 66 |
&can0 { |
| 67 |
pinctrl-names = "default"; |
| 68 |
pinctrl-0 = <&can0_pins_a>; |
| 69 |
xceiver-supply = <®_can0_vcc>; |
| 70 |
status = "okay"; |
| 71 |
}; |
| 72 |
|
| 73 |
&i2c0 { |
| 74 |
pinctrl-names = "default"; |
| 75 |
pinctrl-0 = <&i2c0_pins_a>; |
| 76 |
status = "okay"; |
| 77 |
}; |
| 78 |
|
| 79 |
&lcdif { |
| 80 |
pinctrl-names = "default"; |
| 81 |
pinctrl-0 = <&lcdif_16bit_pins_a |
| 82 |
&lcdif_pins_apf28dev>; |
| 83 |
display = <&display0>; |
| 84 |
status = "okay"; |
| 85 |
|
| 86 |
display0: display0 { |
| 87 |
bits-per-pixel = <16>; |
| 88 |
bus-width = <16>; |
| 89 |
|
| 90 |
display-timings { |
| 91 |
native-mode = <&timing0>; |
| 92 |
timing0: timing0 { |
| 93 |
clock-frequency = <33000033>; |
| 94 |
hactive = <800>; |
| 95 |
vactive = <480>; |
| 96 |
hback-porch = <96>; |
| 97 |
hfront-porch = <96>; |
| 98 |
vback-porch = <20>; |
| 99 |
vfront-porch = <21>; |
| 100 |
hsync-len = <64>; |
| 101 |
vsync-len = <4>; |
| 102 |
hsync-active = <1>; |
| 103 |
vsync-active = <1>; |
| 104 |
de-active = <1>; |
| 105 |
pixelclk-active = <0>; |
| 106 |
}; |
| 107 |
}; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
&lradc { |
| 112 |
fsl,lradc-touchscreen-wires = <4>; |
| 113 |
status = "okay"; |
| 114 |
}; |
| 115 |
|
| 116 |
&mac1 { |
| 117 |
phy-mode = "rmii"; |
| 118 |
pinctrl-names = "default"; |
| 119 |
pinctrl-0 = <&mac1_pins_a>; |
| 120 |
phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; |
| 121 |
status = "okay"; |
| 122 |
}; |
| 123 |
|
| 124 |
&pinctrl { |
| 125 |
pinctrl-names = "default"; |
| 126 |
pinctrl-0 = <&hog_pins_apf28dev>; |
| 127 |
|
| 128 |
hog_pins_apf28dev: hog@0 { |
| 129 |
reg = <0>; |
| 130 |
fsl,pinmux-ids = < |
| 131 |
MX28_PAD_LCD_D16__GPIO_1_16 |
| 132 |
MX28_PAD_LCD_D17__GPIO_1_17 |
| 133 |
MX28_PAD_LCD_D18__GPIO_1_18 |
| 134 |
MX28_PAD_LCD_D19__GPIO_1_19 |
| 135 |
MX28_PAD_LCD_D20__GPIO_1_20 |
| 136 |
MX28_PAD_LCD_D21__GPIO_1_21 |
| 137 |
MX28_PAD_LCD_D22__GPIO_1_22 |
| 138 |
MX28_PAD_GPMI_CE1N__GPIO_0_17 |
| 139 |
>; |
| 140 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 141 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 142 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 143 |
}; |
| 144 |
|
| 145 |
lcdif_pins_apf28dev: lcdif-apf28dev@0 { |
| 146 |
reg = <0>; |
| 147 |
fsl,pinmux-ids = < |
| 148 |
MX28_PAD_LCD_RD_E__LCD_VSYNC |
| 149 |
MX28_PAD_LCD_WR_RWN__LCD_HSYNC |
| 150 |
MX28_PAD_LCD_RS__LCD_DOTCLK |
| 151 |
MX28_PAD_LCD_CS__LCD_ENABLE |
| 152 |
>; |
| 153 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 154 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 155 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 156 |
}; |
| 157 |
|
| 158 |
usb0_otg_apf28dev: otg-apf28dev@0 { |
| 159 |
reg = <0>; |
| 160 |
fsl,pinmux-ids = < |
| 161 |
MX28_PAD_LCD_D23__GPIO_1_23 |
| 162 |
>; |
| 163 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 164 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 165 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 166 |
}; |
| 167 |
}; |
| 168 |
|
| 169 |
&pwm { |
| 170 |
pinctrl-names = "default"; |
| 171 |
pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>; |
| 172 |
status = "okay"; |
| 173 |
}; |
| 174 |
|
| 175 |
&ssp0 { |
| 176 |
compatible = "fsl,imx28-mmc"; |
| 177 |
pinctrl-names = "default"; |
| 178 |
pinctrl-0 = <&mmc0_4bit_pins_a |
| 179 |
&mmc0_cd_cfg &mmc0_sck_cfg>; |
| 180 |
bus-width = <4>; |
| 181 |
status = "okay"; |
| 182 |
}; |
| 183 |
|
| 184 |
&ssp2 { |
| 185 |
compatible = "fsl,imx28-spi"; |
| 186 |
pinctrl-names = "default"; |
| 187 |
pinctrl-0 = <&spi2_pins_a>; |
| 188 |
status = "okay"; |
| 189 |
}; |
| 190 |
|
| 191 |
&usb0 { |
| 192 |
pinctrl-names = "default"; |
| 193 |
pinctrl-0 = <&usb0_otg_apf28dev |
| 194 |
&usb0_id_pins_b>; |
| 195 |
vbus-supply = <®_usb0_vbus>; |
| 196 |
status = "okay"; |
| 197 |
}; |
| 198 |
|
| 199 |
&usb1 { |
| 200 |
status = "okay"; |
| 201 |
}; |
| 202 |
|
| 203 |
&usbphy0 { |
| 204 |
status = "okay"; |
| 205 |
}; |
| 206 |
|
| 207 |
&usbphy1 { |
| 208 |
status = "okay"; |
| 209 |
}; |