| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright (C) 2013 Marek Vasut <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include "imx28.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "MSR M28CU3"; |
| 11 |
compatible = "msr,m28cu3", "fsl,imx28"; |
| 12 |
|
| 13 |
memory@40000000 { |
| 14 |
device_type = "memory"; |
| 15 |
reg = <0x40000000 0x08000000>; |
| 16 |
}; |
| 17 |
|
| 18 |
backlight { |
| 19 |
compatible = "pwm-backlight"; |
| 20 |
pwms = <&pwm 3 5000000 0>; |
| 21 |
brightness-levels = <0 4 8 16 32 64 128 255>; |
| 22 |
default-brightness-level = <6>; |
| 23 |
}; |
| 24 |
|
| 25 |
leds { |
| 26 |
compatible = "gpio-leds"; |
| 27 |
pinctrl-names = "default"; |
| 28 |
pinctrl-0 = <&led_pins_gpio>; |
| 29 |
|
| 30 |
user1 { |
| 31 |
label = "sd0-led"; |
| 32 |
gpios = <&gpio2 26 0>; |
| 33 |
linux,default-trigger = "mmc0"; |
| 34 |
}; |
| 35 |
|
| 36 |
user2 { |
| 37 |
label = "sd1-led"; |
| 38 |
gpios = <&gpio2 24 0>; |
| 39 |
linux,default-trigger = "mmc2"; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
reg_3p3v: regulator-0 { |
| 44 |
compatible = "regulator-fixed"; |
| 45 |
regulator-name = "3P3V"; |
| 46 |
regulator-min-microvolt = <3300000>; |
| 47 |
regulator-max-microvolt = <3300000>; |
| 48 |
regulator-always-on; |
| 49 |
}; |
| 50 |
|
| 51 |
reg_vddio_sd0: regulator-1 { |
| 52 |
compatible = "regulator-fixed"; |
| 53 |
regulator-name = "vddio-sd0"; |
| 54 |
regulator-min-microvolt = <3300000>; |
| 55 |
regulator-max-microvolt = <3300000>; |
| 56 |
gpio = <&gpio3 29 0>; |
| 57 |
}; |
| 58 |
|
| 59 |
reg_vddio_sd1: regulator-2 { |
| 60 |
compatible = "regulator-fixed"; |
| 61 |
regulator-name = "vddio-sd1"; |
| 62 |
regulator-min-microvolt = <3300000>; |
| 63 |
regulator-max-microvolt = <3300000>; |
| 64 |
gpio = <&gpio2 19 0>; |
| 65 |
}; |
| 66 |
|
| 67 |
reg_usb1_vbus: regulator-3 { |
| 68 |
compatible = "regulator-fixed"; |
| 69 |
regulator-name = "usb1_vbus"; |
| 70 |
regulator-min-microvolt = <5000000>; |
| 71 |
regulator-max-microvolt = <5000000>; |
| 72 |
gpio = <&gpio3 8 0>; |
| 73 |
enable-active-high; |
| 74 |
}; |
| 75 |
}; |
| 76 |
|
| 77 |
&auart0 { |
| 78 |
pinctrl-names = "default"; |
| 79 |
pinctrl-0 = <&auart0_2pins_a>; |
| 80 |
status = "okay"; |
| 81 |
}; |
| 82 |
|
| 83 |
&auart3 { |
| 84 |
pinctrl-names = "default"; |
| 85 |
pinctrl-0 = <&auart3_2pins_b>; |
| 86 |
status = "okay"; |
| 87 |
}; |
| 88 |
|
| 89 |
&duart { |
| 90 |
pinctrl-names = "default"; |
| 91 |
pinctrl-0 = <&duart_pins_b>; |
| 92 |
status = "okay"; |
| 93 |
}; |
| 94 |
|
| 95 |
&gpmi { |
| 96 |
#address-cells = <1>; |
| 97 |
#size-cells = <1>; |
| 98 |
pinctrl-names = "default"; |
| 99 |
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; |
| 100 |
status = "okay"; |
| 101 |
|
| 102 |
partition@0 { |
| 103 |
label = "gpmi-nfc-0-boot"; |
| 104 |
reg = <0x00000000 0x01400000>; |
| 105 |
read-only; |
| 106 |
}; |
| 107 |
|
| 108 |
partition@1 { |
| 109 |
label = "gpmi-nfc-general-use"; |
| 110 |
reg = <0x01400000 0x0ec00000>; |
| 111 |
}; |
| 112 |
}; |
| 113 |
|
| 114 |
&lcdif { |
| 115 |
pinctrl-names = "default"; |
| 116 |
pinctrl-0 = <&lcdif_24bit_pins_a |
| 117 |
&lcdif_pins_m28>; |
| 118 |
display = <&display0>; |
| 119 |
status = "okay"; |
| 120 |
|
| 121 |
display0: display0 { |
| 122 |
bits-per-pixel = <32>; |
| 123 |
bus-width = <24>; |
| 124 |
|
| 125 |
display-timings { |
| 126 |
native-mode = <&timing0>; |
| 127 |
timing0: timing0 { |
| 128 |
clock-frequency = <6410256>; |
| 129 |
hactive = <320>; |
| 130 |
vactive = <240>; |
| 131 |
hback-porch = <38>; |
| 132 |
hfront-porch = <20>; |
| 133 |
vback-porch = <15>; |
| 134 |
vfront-porch = <5>; |
| 135 |
hsync-len = <30>; |
| 136 |
vsync-len = <3>; |
| 137 |
hsync-active = <0>; |
| 138 |
vsync-active = <0>; |
| 139 |
de-active = <1>; |
| 140 |
pixelclk-active = <1>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
}; |
| 144 |
}; |
| 145 |
|
| 146 |
&mac0 { |
| 147 |
phy-mode = "rmii"; |
| 148 |
pinctrl-names = "default"; |
| 149 |
pinctrl-0 = <&mac0_pins_a>; |
| 150 |
phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; |
| 151 |
phy-reset-duration = <100>; |
| 152 |
status = "okay"; |
| 153 |
}; |
| 154 |
|
| 155 |
&mac1 { |
| 156 |
phy-mode = "rmii"; |
| 157 |
pinctrl-names = "default"; |
| 158 |
pinctrl-0 = <&mac1_pins_a>; |
| 159 |
status = "okay"; |
| 160 |
}; |
| 161 |
|
| 162 |
&ocotp { |
| 163 |
status = "okay"; |
| 164 |
}; |
| 165 |
|
| 166 |
&pinctrl { |
| 167 |
pinctrl-names = "default"; |
| 168 |
pinctrl-0 = <&hog_pins_a>; |
| 169 |
|
| 170 |
hog_pins_a: hog@0 { |
| 171 |
reg = <0>; |
| 172 |
fsl,pinmux-ids = < |
| 173 |
MX28_PAD_SSP2_SS0__GPIO_2_19 |
| 174 |
MX28_PAD_PWM4__GPIO_3_29 |
| 175 |
MX28_PAD_AUART2_RX__GPIO_3_8 |
| 176 |
MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
| 177 |
>; |
| 178 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 179 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 180 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 181 |
}; |
| 182 |
|
| 183 |
lcdif_pins_m28: lcdif-m28@0 { |
| 184 |
reg = <0>; |
| 185 |
fsl,pinmux-ids = < |
| 186 |
MX28_PAD_LCD_VSYNC__LCD_VSYNC |
| 187 |
MX28_PAD_LCD_HSYNC__LCD_HSYNC |
| 188 |
MX28_PAD_LCD_DOTCLK__LCD_DOTCLK |
| 189 |
MX28_PAD_LCD_RESET__LCD_RESET |
| 190 |
MX28_PAD_LCD_CS__LCD_ENABLE |
| 191 |
MX28_PAD_AUART1_TX__GPIO_3_5 |
| 192 |
>; |
| 193 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 194 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 195 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 196 |
}; |
| 197 |
|
| 198 |
led_pins_gpio: leds-m28@0 { |
| 199 |
reg = <0>; |
| 200 |
fsl,pinmux-ids = < |
| 201 |
MX28_PAD_SSP3_MISO__GPIO_2_26 |
| 202 |
MX28_PAD_SSP3_SCK__GPIO_2_24 |
| 203 |
>; |
| 204 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 205 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 206 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 207 |
}; |
| 208 |
}; |
| 209 |
|
| 210 |
&pwm { |
| 211 |
pinctrl-names = "default"; |
| 212 |
pinctrl-0 = <&pwm3_pins_a>; |
| 213 |
status = "okay"; |
| 214 |
}; |
| 215 |
|
| 216 |
&ssp0 { |
| 217 |
compatible = "fsl,imx28-mmc"; |
| 218 |
pinctrl-names = "default"; |
| 219 |
pinctrl-0 = <&mmc0_4bit_pins_a |
| 220 |
&mmc0_cd_cfg |
| 221 |
&mmc0_sck_cfg>; |
| 222 |
bus-width = <4>; |
| 223 |
vmmc-supply = <®_vddio_sd0>; |
| 224 |
status = "okay"; |
| 225 |
}; |
| 226 |
|
| 227 |
&ssp2 { |
| 228 |
compatible = "fsl,imx28-mmc"; |
| 229 |
pinctrl-names = "default"; |
| 230 |
pinctrl-0 = <&mmc2_4bit_pins_a |
| 231 |
&mmc2_cd_cfg |
| 232 |
&mmc2_sck_cfg_a>; |
| 233 |
bus-width = <4>; |
| 234 |
vmmc-supply = <®_vddio_sd1>; |
| 235 |
status = "okay"; |
| 236 |
}; |
| 237 |
|
| 238 |
&usb1 { |
| 239 |
vbus-supply = <®_usb1_vbus>; |
| 240 |
pinctrl-names = "default"; |
| 241 |
pinctrl-0 = <&usb1_pins_a>; |
| 242 |
disable-over-current; |
| 243 |
status = "okay"; |
| 244 |
}; |
| 245 |
|
| 246 |
&usbphy1 { |
| 247 |
status = "okay"; |
| 248 |
}; |