| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright 2013 Eukréa Electromatique <[email protected]> |
| 4 |
* Copyright 2013 Eukréa Electromatique <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <dt-bindings/input/input.h> |
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include "imx28.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "Eukrea Electromatique MBMX28LC"; |
| 13 |
compatible = "eukrea,mbmx28lc", "fsl,imx28"; |
| 14 |
|
| 15 |
backlight { |
| 16 |
compatible = "pwm-backlight"; |
| 17 |
pwms = <&pwm 4 1000000 0>; |
| 18 |
brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>; |
| 19 |
default-brightness-level = <10>; |
| 20 |
}; |
| 21 |
|
| 22 |
gpio-keys-0 { |
| 23 |
compatible = "gpio-keys"; |
| 24 |
pinctrl-names = "default"; |
| 25 |
pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>; |
| 26 |
|
| 27 |
switch-sw3 { |
| 28 |
label = "SW3"; |
| 29 |
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; |
| 30 |
linux,code = <BTN_MISC>; |
| 31 |
wakeup-source; |
| 32 |
}; |
| 33 |
}; |
| 34 |
|
| 35 |
gpio-keys-1 { |
| 36 |
compatible = "gpio-keys"; |
| 37 |
pinctrl-names = "default"; |
| 38 |
pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>; |
| 39 |
|
| 40 |
switch-sw4 { |
| 41 |
label = "SW4"; |
| 42 |
gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; |
| 43 |
linux,code = <BTN_MISC>; |
| 44 |
wakeup-source; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
led-d6 { |
| 49 |
compatible = "gpio-leds"; |
| 50 |
pinctrl-names = "default"; |
| 51 |
pinctrl-0 = <&led_d6_pins_mbmx28lc>; |
| 52 |
|
| 53 |
led1 { |
| 54 |
label = "d6"; |
| 55 |
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; |
| 56 |
linux,default-trigger = "heartbeat"; |
| 57 |
}; |
| 58 |
}; |
| 59 |
|
| 60 |
led-d7 { |
| 61 |
compatible = "gpio-leds"; |
| 62 |
pinctrl-names = "default"; |
| 63 |
pinctrl-0 = <&led_d7_pins_mbmx28lc>; |
| 64 |
|
| 65 |
led1 { |
| 66 |
label = "d7"; |
| 67 |
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; |
| 68 |
linux,default-trigger = "default-on"; |
| 69 |
}; |
| 70 |
}; |
| 71 |
|
| 72 |
reg_3p3v: regulator-0 { |
| 73 |
compatible = "regulator-fixed"; |
| 74 |
regulator-name = "3P3V"; |
| 75 |
regulator-min-microvolt = <3300000>; |
| 76 |
regulator-max-microvolt = <3300000>; |
| 77 |
regulator-always-on; |
| 78 |
}; |
| 79 |
|
| 80 |
reg_lcd_3v3: regulator-1 { |
| 81 |
compatible = "regulator-fixed"; |
| 82 |
pinctrl-names = "default"; |
| 83 |
pinctrl-0 = <®_lcd_3v3_pins_mbmx28lc>; |
| 84 |
regulator-name = "lcd-3v3"; |
| 85 |
regulator-min-microvolt = <3300000>; |
| 86 |
regulator-max-microvolt = <3300000>; |
| 87 |
gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; |
| 88 |
enable-active-high; |
| 89 |
}; |
| 90 |
|
| 91 |
reg_usb0_vbus: regulator-2 { |
| 92 |
compatible = "regulator-fixed"; |
| 93 |
pinctrl-names = "default"; |
| 94 |
pinctrl-0 = <®_usb0_vbus_pins_mbmx28lc>; |
| 95 |
regulator-name = "usb0_vbus"; |
| 96 |
regulator-min-microvolt = <5000000>; |
| 97 |
regulator-max-microvolt = <5000000>; |
| 98 |
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; |
| 99 |
enable-active-high; |
| 100 |
}; |
| 101 |
|
| 102 |
reg_usb1_vbus: regulator-3 { |
| 103 |
compatible = "regulator-fixed"; |
| 104 |
pinctrl-names = "default"; |
| 105 |
pinctrl-0 = <®_usb1_vbus_pins_mbmx28lc>; |
| 106 |
regulator-name = "usb1_vbus"; |
| 107 |
regulator-min-microvolt = <5000000>; |
| 108 |
regulator-max-microvolt = <5000000>; |
| 109 |
gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>; |
| 110 |
enable-active-high; |
| 111 |
}; |
| 112 |
|
| 113 |
sound { |
| 114 |
compatible = "fsl,imx28-mbmx28lc-sgtl5000", |
| 115 |
"fsl,mxs-audio-sgtl5000"; |
| 116 |
model = "imx28-mbmx28lc-sgtl5000"; |
| 117 |
saif-controllers = <&saif0 &saif1>; |
| 118 |
audio-codec = <&sgtl5000>; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
&duart { |
| 123 |
pinctrl-names = "default"; |
| 124 |
pinctrl-0 = <&duart_4pins_a>; |
| 125 |
status = "okay"; |
| 126 |
}; |
| 127 |
|
| 128 |
&i2c0 { |
| 129 |
pinctrl-names = "default"; |
| 130 |
pinctrl-0 = <&i2c0_pins_a>; |
| 131 |
status = "okay"; |
| 132 |
|
| 133 |
sgtl5000: codec@a { |
| 134 |
compatible = "fsl,sgtl5000"; |
| 135 |
reg = <0x0a>; |
| 136 |
#sound-dai-cells = <0>; |
| 137 |
VDDA-supply = <®_3p3v>; |
| 138 |
VDDIO-supply = <®_3p3v>; |
| 139 |
clocks = <&saif0>; |
| 140 |
}; |
| 141 |
}; |
| 142 |
|
| 143 |
&lcdif { |
| 144 |
pinctrl-names = "default"; |
| 145 |
pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>; |
| 146 |
lcd-supply = <®_lcd_3v3>; |
| 147 |
display = <&display0>; |
| 148 |
status = "okay"; |
| 149 |
|
| 150 |
display0: display0 { |
| 151 |
model = "43WVF1G-0"; |
| 152 |
bits-per-pixel = <16>; |
| 153 |
bus-width = <18>; |
| 154 |
|
| 155 |
display-timings { |
| 156 |
native-mode = <&timing0>; |
| 157 |
timing0: timing0 { |
| 158 |
clock-frequency = <9072000>; |
| 159 |
hactive = <480>; |
| 160 |
vactive = <272>; |
| 161 |
hback-porch = <10>; |
| 162 |
hfront-porch = <5>; |
| 163 |
vback-porch = <8>; |
| 164 |
vfront-porch = <8>; |
| 165 |
hsync-len = <40>; |
| 166 |
vsync-len = <10>; |
| 167 |
hsync-active = <0>; |
| 168 |
vsync-active = <0>; |
| 169 |
de-active = <1>; |
| 170 |
pixelclk-active = <1>; |
| 171 |
}; |
| 172 |
}; |
| 173 |
}; |
| 174 |
}; |
| 175 |
|
| 176 |
&lradc { |
| 177 |
fsl,lradc-touchscreen-wires = <4>; |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
&pinctrl { |
| 182 |
gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 { |
| 183 |
reg = <0>; |
| 184 |
fsl,pinmux-ids = < |
| 185 |
MX28_PAD_LCD_D21__GPIO_1_21 |
| 186 |
>; |
| 187 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 188 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 189 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 190 |
}; |
| 191 |
|
| 192 |
gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 { |
| 193 |
reg = <0>; |
| 194 |
fsl,pinmux-ids = < |
| 195 |
MX28_PAD_LCD_D20__GPIO_1_20 |
| 196 |
>; |
| 197 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 198 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 199 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 200 |
}; |
| 201 |
|
| 202 |
lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 { |
| 203 |
reg = <0>; |
| 204 |
fsl,pinmux-ids = < |
| 205 |
MX28_PAD_LCD_VSYNC__LCD_VSYNC |
| 206 |
MX28_PAD_LCD_HSYNC__LCD_HSYNC |
| 207 |
MX28_PAD_LCD_DOTCLK__LCD_DOTCLK |
| 208 |
MX28_PAD_LCD_ENABLE__LCD_ENABLE |
| 209 |
>; |
| 210 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 211 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 212 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 213 |
}; |
| 214 |
|
| 215 |
led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 { |
| 216 |
reg = <0>; |
| 217 |
fsl,pinmux-ids = < |
| 218 |
MX28_PAD_LCD_D23__GPIO_1_23 |
| 219 |
>; |
| 220 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 221 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 222 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 223 |
}; |
| 224 |
|
| 225 |
led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 { |
| 226 |
reg = <0>; |
| 227 |
fsl,pinmux-ids = < |
| 228 |
MX28_PAD_LCD_D22__GPIO_1_22 |
| 229 |
>; |
| 230 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 231 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 232 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 233 |
}; |
| 234 |
|
| 235 |
reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 { |
| 236 |
reg = <0>; |
| 237 |
fsl,pinmux-ids = < |
| 238 |
MX28_PAD_LCD_RESET__GPIO_3_30 |
| 239 |
>; |
| 240 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 241 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 242 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 243 |
}; |
| 244 |
|
| 245 |
reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 { |
| 246 |
reg = <0>; |
| 247 |
fsl,pinmux-ids = < |
| 248 |
MX28_PAD_LCD_D18__GPIO_1_18 |
| 249 |
>; |
| 250 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 251 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 252 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 253 |
}; |
| 254 |
|
| 255 |
reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 { |
| 256 |
reg = <0>; |
| 257 |
fsl,pinmux-ids = < |
| 258 |
MX28_PAD_LCD_D19__GPIO_1_19 |
| 259 |
>; |
| 260 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 261 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 262 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 263 |
}; |
| 264 |
}; |
| 265 |
|
| 266 |
&pwm { |
| 267 |
pinctrl-names = "default"; |
| 268 |
pinctrl-0 = <&pwm4_pins_a>; |
| 269 |
status = "okay"; |
| 270 |
}; |
| 271 |
|
| 272 |
&saif0 { |
| 273 |
pinctrl-names = "default"; |
| 274 |
pinctrl-0 = <&saif0_pins_a>; |
| 275 |
status = "okay"; |
| 276 |
}; |
| 277 |
|
| 278 |
&saif1 { |
| 279 |
pinctrl-names = "default"; |
| 280 |
pinctrl-0 = <&saif1_pins_a>; |
| 281 |
fsl,saif-master = <&saif0>; |
| 282 |
status = "okay"; |
| 283 |
}; |
| 284 |
|
| 285 |
&ssp0 { |
| 286 |
compatible = "fsl,imx28-mmc"; |
| 287 |
pinctrl-names = "default"; |
| 288 |
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>; |
| 289 |
bus-width = <4>; |
| 290 |
cd-inverted; |
| 291 |
status = "okay"; |
| 292 |
}; |
| 293 |
|
| 294 |
&usb0 { |
| 295 |
disable-over-current; |
| 296 |
vbus-supply = <®_usb0_vbus>; |
| 297 |
status = "okay"; |
| 298 |
pinctrl-names = "default"; |
| 299 |
pinctrl-0 = <&usb0_id_pins_b>; |
| 300 |
}; |
| 301 |
|
| 302 |
&usb1 { |
| 303 |
vbus-supply = <®_usb1_vbus>; |
| 304 |
status = "okay"; |
| 305 |
}; |
| 306 |
|
| 307 |
&usbphy0 { |
| 308 |
status = "okay"; |
| 309 |
}; |
| 310 |
|
| 311 |
&usbphy1 { |
| 312 |
status = "okay"; |
| 313 |
}; |