| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
// |
| 3 |
// Copyright 2012 Freescale Semiconductor, Inc. |
| 4 |
|
| 5 |
/dts-v1/; |
| 6 |
#include "imx28.dtsi" |
| 7 |
|
| 8 |
/ { |
| 9 |
model = "Freescale i.MX28 Evaluation Kit"; |
| 10 |
compatible = "fsl,imx28-evk", "fsl,imx28"; |
| 11 |
|
| 12 |
memory@40000000 { |
| 13 |
device_type = "memory"; |
| 14 |
reg = <0x40000000 0x08000000>; |
| 15 |
}; |
| 16 |
|
| 17 |
|
| 18 |
reg_3p3v: regulator-3p3v { |
| 19 |
compatible = "regulator-fixed"; |
| 20 |
regulator-name = "3P3V"; |
| 21 |
regulator-min-microvolt = <3300000>; |
| 22 |
regulator-max-microvolt = <3300000>; |
| 23 |
regulator-always-on; |
| 24 |
}; |
| 25 |
|
| 26 |
reg_vddio_sd0: regulator-vddio-sd0 { |
| 27 |
compatible = "regulator-fixed"; |
| 28 |
regulator-name = "vddio-sd0"; |
| 29 |
regulator-min-microvolt = <3300000>; |
| 30 |
regulator-max-microvolt = <3300000>; |
| 31 |
gpio = <&gpio3 28 0>; |
| 32 |
}; |
| 33 |
|
| 34 |
reg_fec_3v3: regulator-fec-3v3 { |
| 35 |
compatible = "regulator-fixed"; |
| 36 |
regulator-name = "fec-3v3"; |
| 37 |
regulator-min-microvolt = <3300000>; |
| 38 |
regulator-max-microvolt = <3300000>; |
| 39 |
gpio = <&gpio2 15 0>; |
| 40 |
}; |
| 41 |
|
| 42 |
reg_usb0_vbus: regulator-usb0-vbus { |
| 43 |
compatible = "regulator-fixed"; |
| 44 |
regulator-name = "usb0_vbus"; |
| 45 |
regulator-min-microvolt = <5000000>; |
| 46 |
regulator-max-microvolt = <5000000>; |
| 47 |
gpio = <&gpio3 9 0>; |
| 48 |
enable-active-high; |
| 49 |
}; |
| 50 |
|
| 51 |
reg_usb1_vbus: regulator-usb1-vbus { |
| 52 |
compatible = "regulator-fixed"; |
| 53 |
regulator-name = "usb1_vbus"; |
| 54 |
regulator-min-microvolt = <5000000>; |
| 55 |
regulator-max-microvolt = <5000000>; |
| 56 |
gpio = <&gpio3 8 0>; |
| 57 |
enable-active-high; |
| 58 |
}; |
| 59 |
|
| 60 |
reg_lcd_3v3: regulator-lcd-3v3 { |
| 61 |
compatible = "regulator-fixed"; |
| 62 |
regulator-name = "lcd-3v3"; |
| 63 |
regulator-min-microvolt = <3300000>; |
| 64 |
regulator-max-microvolt = <3300000>; |
| 65 |
gpio = <&gpio3 30 0>; |
| 66 |
enable-active-high; |
| 67 |
}; |
| 68 |
|
| 69 |
reg_can_3v3: regulator-can-3v3 { |
| 70 |
compatible = "regulator-fixed"; |
| 71 |
regulator-name = "can-3v3"; |
| 72 |
regulator-min-microvolt = <3300000>; |
| 73 |
regulator-max-microvolt = <3300000>; |
| 74 |
gpio = <&gpio2 13 0>; |
| 75 |
enable-active-high; |
| 76 |
}; |
| 77 |
|
| 78 |
reg_lcd_5v: regulator-lcd-5v { |
| 79 |
compatible = "regulator-fixed"; |
| 80 |
regulator-name = "lcd-5v"; |
| 81 |
regulator-min-microvolt = <5000000>; |
| 82 |
regulator-max-microvolt = <5000000>; |
| 83 |
}; |
| 84 |
|
| 85 |
panel { |
| 86 |
compatible = "sii,43wvf1g"; |
| 87 |
backlight = <&backlight_display>; |
| 88 |
dvdd-supply = <®_lcd_3v3>; |
| 89 |
avdd-supply = <®_lcd_5v>; |
| 90 |
|
| 91 |
port { |
| 92 |
panel_in: endpoint { |
| 93 |
remote-endpoint = <&display_out>; |
| 94 |
}; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
sound { |
| 99 |
compatible = "fsl,imx28-evk-sgtl5000", |
| 100 |
"fsl,mxs-audio-sgtl5000"; |
| 101 |
model = "imx28-evk-sgtl5000"; |
| 102 |
saif-controllers = <&saif0 &saif1>; |
| 103 |
audio-codec = <&sgtl5000>; |
| 104 |
}; |
| 105 |
|
| 106 |
leds { |
| 107 |
compatible = "gpio-leds"; |
| 108 |
pinctrl-names = "default"; |
| 109 |
pinctrl-0 = <&led_pin_gpio3_5>; |
| 110 |
|
| 111 |
user { |
| 112 |
label = "Heartbeat"; |
| 113 |
gpios = <&gpio3 5 0>; |
| 114 |
linux,default-trigger = "heartbeat"; |
| 115 |
}; |
| 116 |
}; |
| 117 |
|
| 118 |
backlight_display: backlight { |
| 119 |
compatible = "pwm-backlight"; |
| 120 |
pwms = <&pwm 2 5000000 0>; |
| 121 |
brightness-levels = <0 4 8 16 32 64 128 255>; |
| 122 |
default-brightness-level = <6>; |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
&auart0 { |
| 127 |
pinctrl-names = "default"; |
| 128 |
pinctrl-0 = <&auart0_pins_a>; |
| 129 |
uart-has-rtscts; |
| 130 |
status = "okay"; |
| 131 |
}; |
| 132 |
|
| 133 |
&auart3 { |
| 134 |
pinctrl-names = "default"; |
| 135 |
pinctrl-0 = <&auart3_pins_a>; |
| 136 |
status = "okay"; |
| 137 |
}; |
| 138 |
|
| 139 |
&can0 { |
| 140 |
pinctrl-names = "default"; |
| 141 |
pinctrl-0 = <&can0_pins_a>; |
| 142 |
xceiver-supply = <®_can_3v3>; |
| 143 |
status = "okay"; |
| 144 |
}; |
| 145 |
|
| 146 |
&can1 { |
| 147 |
pinctrl-names = "default"; |
| 148 |
pinctrl-0 = <&can1_pins_a>; |
| 149 |
xceiver-supply = <®_can_3v3>; |
| 150 |
status = "okay"; |
| 151 |
}; |
| 152 |
|
| 153 |
&duart { |
| 154 |
pinctrl-names = "default"; |
| 155 |
pinctrl-0 = <&duart_pins_a>; |
| 156 |
status = "okay"; |
| 157 |
}; |
| 158 |
|
| 159 |
&gpmi { |
| 160 |
pinctrl-names = "default"; |
| 161 |
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg |
| 162 |
&gpmi_pins_evk>; |
| 163 |
status = "okay"; |
| 164 |
}; |
| 165 |
|
| 166 |
&lcdif { |
| 167 |
pinctrl-names = "default"; |
| 168 |
pinctrl-0 = <&lcdif_24bit_pins_a |
| 169 |
&lcdif_pins_evk>; |
| 170 |
status = "okay"; |
| 171 |
|
| 172 |
port { |
| 173 |
display_out: endpoint { |
| 174 |
remote-endpoint = <&panel_in>; |
| 175 |
}; |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
&lradc { |
| 180 |
fsl,lradc-touchscreen-wires = <4>; |
| 181 |
fsl,ave-ctrl = <4>; |
| 182 |
fsl,ave-delay = <2>; |
| 183 |
fsl,settling = <10>; |
| 184 |
status = "okay"; |
| 185 |
}; |
| 186 |
|
| 187 |
&i2c0 { |
| 188 |
pinctrl-names = "default"; |
| 189 |
pinctrl-0 = <&i2c0_pins_a>; |
| 190 |
status = "okay"; |
| 191 |
|
| 192 |
sgtl5000: codec@a { |
| 193 |
compatible = "fsl,sgtl5000"; |
| 194 |
reg = <0x0a>; |
| 195 |
#sound-dai-cells = <0>; |
| 196 |
VDDA-supply = <®_3p3v>; |
| 197 |
VDDIO-supply = <®_3p3v>; |
| 198 |
clocks = <&saif0>; |
| 199 |
}; |
| 200 |
|
| 201 |
eeprom@51 { |
| 202 |
compatible = "atmel,24c32"; |
| 203 |
pagesize = <32>; |
| 204 |
reg = <0x51>; |
| 205 |
}; |
| 206 |
}; |
| 207 |
|
| 208 |
&mac0 { |
| 209 |
phy-mode = "rmii"; |
| 210 |
pinctrl-names = "default"; |
| 211 |
pinctrl-0 = <&mac0_pins_a>; |
| 212 |
phy-supply = <®_fec_3v3>; |
| 213 |
phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; |
| 214 |
phy-reset-duration = <100>; |
| 215 |
status = "okay"; |
| 216 |
}; |
| 217 |
|
| 218 |
&mac1 { |
| 219 |
phy-mode = "rmii"; |
| 220 |
pinctrl-names = "default"; |
| 221 |
pinctrl-0 = <&mac1_pins_a>; |
| 222 |
status = "okay"; |
| 223 |
}; |
| 224 |
|
| 225 |
&pinctrl { |
| 226 |
pinctrl-names = "default"; |
| 227 |
pinctrl-0 = <&hog_pins_a>; |
| 228 |
|
| 229 |
hog_pins_a: hog@0 { |
| 230 |
reg = <0>; |
| 231 |
fsl,pinmux-ids = < |
| 232 |
MX28_PAD_SSP1_CMD__GPIO_2_13 |
| 233 |
MX28_PAD_SSP1_DATA3__GPIO_2_15 |
| 234 |
MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
| 235 |
MX28_PAD_SSP1_SCK__GPIO_2_12 |
| 236 |
MX28_PAD_PWM3__GPIO_3_28 |
| 237 |
MX28_PAD_LCD_RESET__GPIO_3_30 |
| 238 |
MX28_PAD_AUART2_RX__GPIO_3_8 |
| 239 |
MX28_PAD_AUART2_TX__GPIO_3_9 |
| 240 |
>; |
| 241 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 242 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 243 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 244 |
}; |
| 245 |
|
| 246 |
led_pin_gpio3_5: led_gpio3_5@0 { |
| 247 |
reg = <0>; |
| 248 |
fsl,pinmux-ids = < |
| 249 |
MX28_PAD_AUART1_TX__GPIO_3_5 |
| 250 |
>; |
| 251 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 252 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 253 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 254 |
}; |
| 255 |
|
| 256 |
gpmi_pins_evk: gpmi-nand-evk@0 { |
| 257 |
reg = <0>; |
| 258 |
fsl,pinmux-ids = < |
| 259 |
MX28_PAD_GPMI_CE1N__GPMI_CE1N |
| 260 |
MX28_PAD_GPMI_RDY1__GPMI_READY1 |
| 261 |
>; |
| 262 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 263 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 264 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 265 |
}; |
| 266 |
|
| 267 |
lcdif_pins_evk: lcdif-evk@0 { |
| 268 |
reg = <0>; |
| 269 |
fsl,pinmux-ids = < |
| 270 |
MX28_PAD_LCD_RD_E__LCD_VSYNC |
| 271 |
MX28_PAD_LCD_WR_RWN__LCD_HSYNC |
| 272 |
MX28_PAD_LCD_RS__LCD_DOTCLK |
| 273 |
MX28_PAD_LCD_CS__LCD_ENABLE |
| 274 |
>; |
| 275 |
fsl,drive-strength = <MXS_DRIVE_4mA>; |
| 276 |
fsl,voltage = <MXS_VOLTAGE_HIGH>; |
| 277 |
fsl,pull-up = <MXS_PULL_DISABLE>; |
| 278 |
}; |
| 279 |
}; |
| 280 |
|
| 281 |
&pwm { |
| 282 |
pinctrl-names = "default"; |
| 283 |
pinctrl-0 = <&pwm2_pins_a>; |
| 284 |
status = "okay"; |
| 285 |
}; |
| 286 |
|
| 287 |
&saif0 { |
| 288 |
pinctrl-names = "default"; |
| 289 |
pinctrl-0 = <&saif0_pins_a>; |
| 290 |
status = "okay"; |
| 291 |
}; |
| 292 |
|
| 293 |
&saif1 { |
| 294 |
pinctrl-names = "default"; |
| 295 |
pinctrl-0 = <&saif1_pins_a>; |
| 296 |
fsl,saif-master = <&saif0>; |
| 297 |
status = "okay"; |
| 298 |
}; |
| 299 |
|
| 300 |
&ssp0 { |
| 301 |
compatible = "fsl,imx28-mmc"; |
| 302 |
pinctrl-names = "default"; |
| 303 |
pinctrl-0 = <&mmc0_8bit_pins_a |
| 304 |
&mmc0_cd_cfg &mmc0_sck_cfg>; |
| 305 |
bus-width = <8>; |
| 306 |
wp-gpios = <&gpio2 12 0>; |
| 307 |
vmmc-supply = <®_vddio_sd0>; |
| 308 |
status = "okay"; |
| 309 |
}; |
| 310 |
|
| 311 |
&ssp1 { |
| 312 |
compatible = "fsl,imx28-mmc"; |
| 313 |
bus-width = <8>; |
| 314 |
wp-gpios = <&gpio0 28 0>; |
| 315 |
}; |
| 316 |
|
| 317 |
&ssp2 { |
| 318 |
#address-cells = <1>; |
| 319 |
#size-cells = <0>; |
| 320 |
compatible = "fsl,imx28-spi"; |
| 321 |
pinctrl-names = "default"; |
| 322 |
pinctrl-0 = <&spi2_pins_a>; |
| 323 |
status = "okay"; |
| 324 |
|
| 325 |
flash: flash@0 { |
| 326 |
reg = <0>; |
| 327 |
#address-cells = <1>; |
| 328 |
#size-cells = <1>; |
| 329 |
compatible = "sst,sst25vf016b", "jedec,spi-nor"; |
| 330 |
spi-max-frequency = <40000000>; |
| 331 |
}; |
| 332 |
}; |
| 333 |
|
| 334 |
&usb0 { |
| 335 |
pinctrl-names = "default"; |
| 336 |
pinctrl-0 = <&usb0_id_pins_a>; |
| 337 |
vbus-supply = <®_usb0_vbus>; |
| 338 |
status = "okay"; |
| 339 |
}; |
| 340 |
|
| 341 |
&usb1 { |
| 342 |
vbus-supply = <®_usb1_vbus>; |
| 343 |
status = "okay"; |
| 344 |
}; |
| 345 |
|
| 346 |
&usbphy0 { |
| 347 |
status = "okay"; |
| 348 |
}; |
| 349 |
|
| 350 |
&usbphy1 { |
| 351 |
status = "okay"; |
| 352 |
}; |