Debian Codegraph @

doc/locale/ja/LC_MESSAGES/news/13.po

raw
1 # -*- po -*-
2 # Japanese translations for 1.2.4 package.
3 # Copyright (C) 2009-2011, Brazil, Inc
4 # This file is distributed under the same license as the groonga package.
5 # Kouhei Sutou <[email protected]>, 2011.
6 #
7 msgid ""
8 msgstr ""
9 "Project-Id-Version: 1.2.4\n"
10 "Report-Msgid-Bugs-To: \n"
11 "PO-Revision-Date: 2024-10-28 18:53+0900\n"
12 "Language-Team: Japanese\n"
13 "Language: ja\n"
14 "MIME-Version: 1.0\n"
15 "Content-Type: text/plain; charset=UTF-8\n"
16 "Content-Transfer-Encoding: 8bit\n"
17 "Plural-Forms: nplurals=1; plural=0;\n"
18
19 msgid "News - 13 series"
20 msgstr "お知らせ - 13系"
21
22 msgid "Release 13.1.1 - 2024-01-09"
23 msgstr "13.1.1リリース - 2024-01-09"
24
25 msgid "Improvements"
26 msgstr "改良"
27
28 msgid "Dropped support for mingw32. [GitHub#1654]"
29 msgstr "mingw32のサポートをやめました。 [GitHub#1654]"
30
31 msgid "Added support for index search of \"vector_column[N] OPERATOR literal\" with `--match_columns` and `--query`."
32 msgstr "`--match_columns` と `--query` を使った \"vector_column[N] OPERATOR literal\" でインデックスを使った検索をサポートしました。"
33
34 msgid "Fixes"
35 msgstr "修正"
36
37 msgid "[{doc}`/install/windows`] Bundled `groonga-normalizer-mysql` again. [GitHub#1655]"
38 msgstr "[{doc}`/install/windows`] `groonga-normalizer-mysql` をバンドルしました。 [GitHub#1655]"
39
40 msgid "Groonga 13.1.0 for Windows didn't include `groonga-normalizer-mysql`. This problem only occured in Groonga 13.1.0."
41 msgstr "Windows版のGroonga 13.1.0に `groonga-normalizer-mysql` が含まれていませんでした。 この問題はGroonga13.1.0でのみ発生します。"
42
43 msgid "Release 13.1.0 - 2023-12-26"
44 msgstr "13.1.0リリース - 2023-12-26"
45
46 msgid "[{doc}`/reference/commands/select`] Groonga also cached trace log."
47 msgstr "[{doc}`/reference/commands/select`] トレースログもキャッシュするようにしました。"
48
49 msgid "Added support for outputting `dict<string>` in a responce of Apache Arrow format."
50 msgstr "Apache Arrow フォーマットの応答で `dict<string>` の出力をサポートしました。"
51
52 msgid "[{doc}`/reference/executables/groonga-server-http`] Added support for new content type `application/vnd.apache.arrow.stream`"
53 msgstr "[{doc}`/reference/executables/groonga-server-http`] 新しい content type `application/vnd.apache.arrow.stream` をサポートしました。"
54
55 msgid "[{doc}`/reference/functions/query`] Added support empty input as below."
56 msgstr "[{doc}`/reference/functions/query`] 以下のような空の入力をサポートしました。"
57
58 msgid "Added support for BFloat16(experimental)"
59 msgstr "BFloat16をサポートしました。(実験的)"
60
61 msgid "We can just load and select BFloat16. We can't use arithmetic operations such as `bfloat16_value - 1.2`."
62 msgstr "BFloat16のloadとselectができるだけです。 `bfloat16_value - 1.2` のような算術演算はできません。"
63
64 msgid "[{doc}`/reference/commands/column_create`] Added new flag `WEIGHT_BFLOAT16`."
65 msgstr "[{doc}`/reference/commands/column_create`] 新しいフラグ `WEIGHT_BFLOAT16` を追加しました。"
66
67 msgid "[{doc}`/reference/commands/select`] Fixed a bug that when Groonga cached `output_pretty=yes` result, Groonga returned a query with `output_pretty` even if we sent a query without `output_pretty`."
68 msgstr "[{doc}`/reference/commands/select`] Groonga が `output_pretty=yes` の結果をキャッシュした場合、 `output_pretty` をつけていないクエリーであっても、`output_pretty`をつけて返してしまう問題を修正しました。"
69
70 msgid "Fixed a wrong data created bug."
71 msgstr "誤ったデータを作り出してしまう問題を修正しました。"
72
73 msgid "In general, users can't do this explicitly because the command API doesn't accept `GRN_OBJ_{APPEND,PREPEND}`. This may be used internally when a dynamic numeric vector column is created and a temporary result set is created (OR is used)."
74 msgstr "通常、ユーザーはこれを明示的に実行できません。数値の動的カラムや一時結果セットが作られたとき、あるいは使われているときに内部的に発生することがあります。"
75
76 msgid "For example, the following query may create wrong data:"
77 msgstr "例えば、以下のクエリーで誤ったデータを作り出すことがあります。"
78
79 msgid "If this is happen, `NUMERIC_DYNAMIC_COLUMN` contains many garbage elements. It also causes too much memory consumption."
80 msgstr "もしこの問題が起こった場合は、`NUMERIC_DYNAMIC_COLUMN` は多くのごみ要素を含んでいます。そして、それは多くのメモリー消費の原因にもなります。"
81
82 msgid "Note that this is caused by an uninitialized variable on stack. So this may or may not be happen."
83 msgstr "この問題はスタック上の未初期化の変数が原因です。そのため、発生するかもしれないし、しないかもしれないことに注意してください。"
84
85 msgid "Fixed a bug that may fail to set valid `normalizers/token_filters`."
86 msgstr "有効な `normalizers/token_filters` の設定が失敗することがある問題を修正しました。"
87
88 msgid "[fuzzy_search] Fixed a crash bug when the following three conditions established."
89 msgstr "[fuzzy_search] 以下の3つの条件が成立した時にクラッシュする問題を修正しました。"
90
91 msgid "Query has 2 or more multi-byte characters."
92 msgstr "クエリーが2つまたはそれ以上のマルチバイト文字を持っている場合。"
93
94 msgid "`${ASCII}${ASCII}${MULTIBYTE}*` characters in a patricia trie table."
95 msgstr "`${ASCII}${ASCII}${MULTIBYTE}*` という形の文字列がパトリシアトライのテーブルにある場合。"
96
97 msgid "`WITH_TRANSPOSITION` is enabled."
98 msgstr "`WITH_TRANSPOSITION` が有効な場合。"
99
100 msgid "For example, \"aaあ\" in a patricia trie table with query \"あああ\" pair has this problem as below."
101 msgstr "例えば、以下のようにパトリシアトライのテーブル内にある\"aaあ\"とクエリー\"あああ\"のペアは問題を起こします。"
102
103 msgid "Release 13.0.9 - 2023-10-29"
104 msgstr "13.0.9リリース - 2023-10-29"
105
106 msgid "[{doc}`/reference/commands/select`] Changed the default value of `--fuzzy_max_expansions` from 0 to 10."
107 msgstr "[{doc}`/reference/commands/select`] `--fuzzy_max_expansions` のデフォルト値を0から10に変更しました。"
108
109 msgid "`--fuzzy_max_expansions` can limit number of words that has close edit distance to use search process. This argument can help to balance hit numbers and performance of the search. When `--fuzzy_max_expansions` is 0, the search use all words that the edit distance are under `--fuzzy_max_distance` in the vocabulary list."
110 msgstr "`--fuzzy_max_expansions` を使うことで検索に使う編集距離の近い語の数を制限できます。この引数を使って、ヒット数と検索パフォーマンスのバランスを取ることができます。`--fuzzy_max_expansions` が0の場合は語彙表にある編集距離が `--fuzzy_max_distance` 以下の語すべてを使って検索をします。"
111
112 msgid "`--fuzzy_max_expansions` is 0 (unlimited) may slow down a search. Therefore, the default value of `--fuzzy_max_expansions` is 10 from this release."
113 msgstr "ただ、 `--fuzzy_max_expansions` が0の場合、検索が遅くなる可能性があります。したがって、今回のリリースから `--fuzzy_max_expansions` のデフォルト値を10に変更しました。"
114
115 msgid "[{doc}`/reference/commands/select`] Improved `select` arguments with addition new argument `--fuzzy_with_transposition` (experimental)."
116 msgstr "[{doc}`/reference/commands/select`] `select` コマンドの引数に新しく `--fuzzy_with_transposition` を追加しました。(実験的)"
117
118 msgid "We can choose edit distance `1` or `2` for the transposition case by using this argument."
119 msgstr "この引数を使うことで「隣接する文字の交換」の編集距離を1または2に指定できます。"
120
121 msgid "If this parameter is `yes`, the edit distance of this case is `1`. It's `2` otherwise."
122 msgstr "`--fuzzy_with_transposition` が `yes` の場合、文字の交換の編集距離は `1` になります。それ以外の値が指定された場合は、文字の交換の編集距離は `2` になります。"
123
124 msgid "[{doc}`/reference/commands/select`] Improved `select` arguments with addition new argument `--fuzzy_tokenize`."
125 msgstr "[{doc}`/reference/commands/select`] `select` の引数に新しく `--fuzzy_tokenize` を追加しました。(実験的)"
126
127 msgid "When `--fuzzy_tokenize` is `yes`, Groonga use tokenizer that specifies in `--default_tokenizer` in typo tolerance search."
128 msgstr "`--fuzzy_tokenize` が `yes` の時、 Groongaは、誤字を許容する検索で `--default_tokenizer` で指定したトークナイザーを使います。"
129
130 msgid "The default value of `--fuzzy_tokenize` is `no`. The useful case of `--fuzzy_tokenize` is the following case."
131 msgstr "`--fuzzy_tokenize` のデフォルト値は `no`です。 `--fuzzy_tokenize` が有用なケースは、以下のケースです。"
132
133 msgid "Search targets are only Japanese data."
134 msgstr "検索対象が日本語のデータのみ。"
135
136 msgid "Specify `TokenMecab` in `--default_tokenizer`."
137 msgstr "`--default_tokenizer` に `TokenMecab` を指定する。"
138
139 msgid "[{doc}`/reference/commands/load`] Added support for `--ifexists` even if we specified `apache-arrow` into `input_type`."
140 msgstr "[{doc}`/reference/commands/load`] `input_type` が `apache-arrow` のときも `--ifexists` が使えるようになりました。"
141
142 msgid "[{doc}`/reference/normalizers`] Improved `NormalizerNFKC*` options with addition new option `remove_blank_force`."
143 msgstr "[{doc}`/reference/normalizers`] `NormalizerNFKC*` に新しく `remove_blank_force` オプションを追加しました。"
144
145 msgid "When `remove_blank_force` is `false`, Normalizer doesn't ignore space as below."
146 msgstr "`remove_blank_force` が `false` の時、以下のようにノーマライザーは空白を無視しません。"
147
148 msgid "[{doc}`/reference/commands/select`] Improved `select` arguments with addition new argument `--output_trace_log` (experimental)."
149 msgstr "[{doc}`/reference/commands/select`] `select` コマンドの引数に新しく `--output_trace_log` を追加しました。(実験的)"
150
151 msgid "If we specify `yes` in `--output_trace_log` and `--command_version 3`, Groonga output addition new log as below."
152 msgstr "`--output_trace_log` に `yes` を指定し `--command_version 3` を指定した場合、Groongaは以下のようなログを新規に出力します。"
153
154 msgid "`--output_trace_log` is valid in only command version 3."
155 msgstr "`--output_trace_log` は、コマンドバージョン3でのみ有効です。"
156
157 msgid "This will be useful for the following cases:"
158 msgstr "以下のケースで有用です。:"
159
160 msgid "Detect real words used by fuzzy query."
161 msgstr "誤字を許容する検索で使われた実際のキーワードの検知。"
162
163 msgid "Measure elapsed timeout without seeing query log."
164 msgstr "クエリーログを見ずに実行時間を測定。"
165
166 msgid "[{doc}`/reference/functions/query`] Added support for object literal."
167 msgstr "[{doc}`/reference/functions/query`] オブジェクトリテラルをサポートしました。"
168
169 msgid "[{doc}`/reference/commands/query_expand`] Added support for `NPP` and `ONPP` (experimental)."
170 msgstr "[{doc}`/reference/commands/query_expand`] `NPP` と `ONPP` をサポートしました(実験的)。"
171
172 msgid "[{doc}`/reference/functions/snippet`] Added support for `normalizers` option."
173 msgstr "[{doc}`/reference/functions/snippet`] `normalizers` オプションをサポートしました。"
174
175 msgid "We can use normalizer with option. For example, when we don't want to ignore space in `snippet()` function, we use this option as below."
176 msgstr "オプション付きのノーマライザーが使えるようになります。例えば、以下のように `snippet()` 関数内でスペースを無視したくない時にこのオプションを使います。"
177
178 msgid "Fixed a bug in `Time OPERATOR Float{,32}` comparison. [GH-1624](https://github.com/groonga/groonga/issues/1624)[Reported by yssrku]"
179 msgstr "`Time OPERATOR Float{,32}` が正しく評価されない問題を修正しました。 [GH-1624](https://github.com/groonga/groonga/issues/1624)[Reported by yssrku]"
180
181 msgid "Microsecond (small value than second) information in `Float{,32}` isn't used. This is happen only when `Time OPERATOR Float{,32}`."
182 msgstr "`Float{,32}` 内のマイクロ秒(秒未満の小さい値)が使えていませんでした。この問題は `Time OPERATOR Float{,32}` の時だけ発生します。"
183
184 msgid "This is happen in `load --ifexists 'A OP B || C OP D'` as below."
185 msgstr "以下のように、 `load --ifexists 'A OP B || C OP D'` でこの問題は発生します。"
186
187 msgid "However, this isn't happen in `select --filter`."
188 msgstr "しかし、 `select --filter` では発生しません。"
189
190 msgid "Fixed a bug that `alnum(a-zA-Z0-9) + blank` may be detected."
191 msgstr "`alnum(a-zA-Z0-9) + blank` が検知されることがある問題を修正しました。"
192
193 msgid "If the number of input is 2 such as `ab` and text with some blanks such as `a b` is matched, `a b` is detected. However, it should not be detected in this case."
194 msgstr "`ab` や `a b` のように複数の空白を含むテキストがマッチする場合、 `a b`が検知されますが、このケースでは検知すべきではありません。"
195
196 msgid "For example, `a i` is detected when this bug occures as below."
197 msgstr "例えば、この問題が発生すると、以下のように `a i` を検知してしまいます。"
198
199 msgid "However, the above result is unexpected result. We don't want to detect `a i` in the above case."
200 msgstr "しかし、上記の結果は期待していない結果です。上記ケースでは `a i` は検知してほしくありません。"
201
202 msgid "Thanks"
203 msgstr "感謝"
204
205 msgid "yssrku"
206 msgstr ""
207
208 msgid "Release 13.0.8 - 2023-09-29"
209 msgstr "13.0.8リリース - 2023-09-29"
210
211 msgid "[{doc}`/reference/commands/column_create`] Improved `column_create` flags with addition new flags `COLUMN_FILTER_SHUFFLE`, `COLUMN_FILTER_BYTE_DELTA`, `COMPRESS_FILTER_TRUNCATE_PRECISION_1BYTE`, and `COMPRESS_FILTER_TRUNCATE_PRECISION_2BYTES`."
212 msgstr "[{doc}`/reference/commands/column_create`] `column_create` に新しいフラグ `COLUMN_FILTER_SHUFFLE`, `COLUMN_FILTER_BYTE_DELTA`, `COMPRESS_FILTER_TRUNCATE_PRECISION_1BYTE`, and `COMPRESS_FILTER_TRUNCATE_PRECISION_2BYTES` を追加しました。"
213
214 msgid "Added new bundling library [Blosc](https://www.blosc.org/)."
215 msgstr "新しく[Blosc](https://www.blosc.org/)をバンドルしました。"
216
217 msgid "`COLUMN_FILTER_SHUFFLE`, `COLUMN_FILTER_BYTE_DELTA`, `COMPRESS_FILTER_TRUNCATE_PRECISION_1BYTE`, and `COMPRESS_FILTER_TRUNCATE_PRECISION_2BYTES` flags are require Blosc."
218 msgstr "`COLUMN_FILTER_SHUFFLE`, `COLUMN_FILTER_BYTE_DELTA`, `COMPRESS_FILTER_TRUNCATE_PRECISION_1BYTE`, `COMPRESS_FILTER_TRUNCATE_PRECISION_2BYTES`フラグがBloscを要求します。"
219
220 msgid "[{doc}`/reference/commands/status`] Improved `status` output with addition new features `\"blosc\"`."
221 msgstr "[{doc}`/reference/commands/status`] `status` コマンドの出力に新しく `\"blosc\"` を追加しました。"
222
223 msgid "[{doc}`/reference/executables/groonga`] Improved `groonga --version` output with addition new value `blosc`."
224 msgstr "[{doc}`/reference/executables/groonga`] `groonga --version` の出力に新しく `blosc` を追加しました。"
225
226 msgid "[{doc}`/reference/commands/select`] Improved `select` arguments with addition new argument `--fuzzy_max_distance` (experimental)."
227 msgstr "[{doc}`/reference/commands/select`] `select` の引数に新しく `--fuzzy_max_distance` を追加しました。(実験的)"
228
229 msgid "[{doc}`/reference/commands/select`] Improved `select` arguments with addition new argument `--fuzzy_max_expansions` (experimental)."
230 msgstr "[{doc}`/reference/commands/select`] `select` コマンドの引数に新しく `--fuzzy_max_expansions` を追加しました。(実験的)"
231
232 msgid "[{doc}`/reference/commands/select`] Improved `select` arguments with addition new argument `--fuzzy_max_distance_ratio` (experimental)."
233 msgstr "[{doc}`/reference/commands/select`] `select` コマンドの引数に新しく `--fuzzy_max_distance_ratio` を追加しました。(実験的)"
234
235 msgid "[{doc}`/reference/commands/select`] Improved `select` arguments with addition new argument `--fuzzy_prefix_length` (experimental)."
236 msgstr "[{doc}`/reference/commands/select`] `select` コマンドの引数に新しく `--fuzzy_prefix_length` を追加しました。(実験的)"
237
238 msgid "[cast] Added support for casting `\"[0.0, 1.0, 1.1, ...]\"` to `Float`/`Float32` vector."
239 msgstr "[cast] `\"[0.0, 1.0, 1.1, ...]\"` を `Float`/`Float32` のベクターへキャストできるようにしました。"
240
241 msgid "[fuzzy_search] Rename `max_expansion` option to `max_expansions` option."
242 msgstr "[fuzzy_search] `max_expansion` オプションの名前を `max_expansions` に変更しました。"
243
244 msgid "`max_expansion` option is deprecate since this release. However, we can use `max_expansion` in the feature to backward compatibility."
245 msgstr "`max_expansion` option はこのリリースから非推奨になりますが、後方互換性を維持するために引き続き使えるようにしています。"
246
247 msgid "Rename master branch to main branch."
248 msgstr "master ブランチの名前を main に変更しました。"
249
250 msgid "[RPM] Use CMake for building."
251 msgstr "[RPM] CMakeを使ってビルドするようにしました。"
252
253 msgid "[Debian] Added support for Debian trixie."
254 msgstr "[Debian] Debian trixie をサポートしました。"
255
256 msgid "[fuzzy_search] Fixed a bug that Groonga may get records that should not match."
257 msgstr "[fuzzy_search] ヒットしないはずのレコードがヒットすることがある問題を修正しました。"
258
259 msgid "[{ref}`query-syntax-near-phrase-search-condition`][{ref}`script-syntax-near-phrase-search-operator`] Fixed a bug that Groonga crashed when the first phrase group doesn't match anything as below."
260 msgstr "[{ref}`query-syntax-near-phrase-search-condition`][{ref}`script-syntax-near-phrase-search-operator`] 以下のように、最初のフレーズグループに何もマッチしない時にGroongaがクラッシュする問題を修正しました。"
261
262 msgid "Release 13.0.7 - 2023-09-12"
263 msgstr "13.0.7リリース - 2023-09-12"
264
265 msgid "[{doc}`/reference/commands/normalize`] Fixed a bug that `normalize` command doesn't output last offset and type."
266 msgstr "[{doc}`/reference/commands/normalize`] `normalize` コマンドで最後の `offset` と `type` が表示されない問題を修正しました。"
267
268 msgid "`normalize` command can output offset and type of string after normalize as below, but `normalize` command doesn't output the last offset and type by this bug."
269 msgstr "`normalize` コマンドは以下のようにノーマライズ後の文字のオフセットとタイプを表示できますが、最後の`offset`と`type`が表示されていませんでした。"
270
271 msgid "[{doc}`/reference/normalizers`] Fixed a bug that the last offset value may be invalid when we use multiple normalizers."
272 msgstr "[{doc}`/reference/normalizers`] 複数のノーマライザーを使用した時に最後の文字のオフセットが不正になることがある問題を修正しました。"
273
274 msgid "For the following example, the last offset value is 27 correctly, but it is 17 in the following example by this bug."
275 msgstr "例えば以下の例では、最後のオフセットは27が正しいですが、以下の例ではこの問題が原因で17になっています。"
276
277 msgid "Release 13.0.6 - 2023-08-31"
278 msgstr "13.0.6リリース - 2023-08-31"
279
280 msgid "[{doc}`/reference/functions/highlight_html`] Don't report error when we specify empty string into `highlight_html()` as below."
281 msgstr "[{doc}`/reference/functions/highlight_html`] 以下のように `highlight_html()` に空文字列を指定してもエラーを報告しなくなりました。"
282
283 msgid "`highlight_html()` just returns an empty text."
284 msgstr "`highlight_html()` は空のテキストを返します。"
285
286 msgid "Added support `aggregator_*` for dynamic columns and pseudo columns."
287 msgstr "動的カラムや疑似カラムを対象に `aggregator_*` を使えるようになりました。"
288
289 msgid "Pseudo column is a column with `_` prefix.(e.g. `_id`, `_nsubrecs`, ...)."
290 msgstr "疑似カラムとは、 `_` で始まるカラムのことです。(例: `_id`, `_nsubrecs`, ...)"
291
292 msgid "[CMake] Fixed a build error with CMake when both of msgpack and msgpackc-cxx are installed."
293 msgstr "[CMake] msgpack と msgpackc-cxx の両方がインストールされている環境でCMakeによるビルドが失敗する問題を修正しました。"
294
295 msgid "Please refer the comment of https://github.com/groonga/groonga/pull/1601 about details."
296 msgstr "詳細については、 https://github.com/groonga/groonga/pull/1601 のコメントを参照してください。"
297
298 msgid "Fixed a parse bug when we use `x OR <0.0y` with `QUERY_NO_SYNTAX_ERROR`."
299 msgstr "`x OR <0.0y` と `QUERY_NO_SYNTAX_ERROR` を使った時に式を正しくパースできない問題を修正しました。"
300
301 msgid "Records that should match may be not matched."
302 msgstr "マッチするはずのレコードがマッチしなくなることがあります。"
303
304 msgid "For example, if we execute the following query, `{\"_key\": \"name yyy\"}` should match but `{\"_key\": \"name yyy\"}` is not match."
305 msgstr "例えば、以下のようなクエリーを実行した場合、`{\"_key\": \"name yyy\"}` はマッチするはずですが、マッチしません。"
306
307 msgid "[{doc}`/reference/functions/highlight_html`] Fixed a bug that highlight position may be incorrect."
308 msgstr "[{doc}`/reference/functions/highlight_html`] ハイライト位置が正しくないことがある問題を修正しました。"
309
310 msgid "For example, this bug occures when we specify as highlight target both of keyword with the number of characters is one and keyword with the number of characters is two."
311 msgstr "例えば、ハイライト対象に文字数が1のキーワードと文字数が2のキーワードを両方指定した時に発生します。"
312
313 msgid "Release 13.0.5 - 2023-08-02"
314 msgstr "13.0.5リリース - 2023-08-02"
315
316 msgid "Fixed a bug that index creation may be failed."
317 msgstr "インデックス構築に失敗することがある問題を修正しました。"
318
319 msgid "Groonga v13.0.2, v13.0.3, and v13.0.4 have this bug. Therefore, If you already have used the above version, we highly recommend that you use Groonga v13.0.5 or later."
320 msgstr "この問題は、Groonga v13.0.2, v13.0.3, v13.0.4 に存在します。したがって、これらのバージョンを使用している場合は、 Groonga v13.0.5 以降を使用することを強くおすすめします。"
321
322 msgid "[{ref}`query-syntax-near-phrase-search-condition`][{ref}`script-syntax-near-phrase-search-operator`] Fixed a bug that Groonga may crash when we specify invalid syntax query."
323 msgstr "[{ref}`query-syntax-near-phrase-search-condition`][{ref}`script-syntax-near-phrase-search-operator`] 各近傍フレーズ検索で、無効なシンタックスのクエリーを指定した時にGroongaがクラッシュすることがある問題を修正しました。"
324
325 msgid "For example, Groonga is supported to occures error in the following case. However if Groonga has this bug, Groonga is crashed in the following case. (We want to notice that one too many a close parenthesis in the value of \"--query\" in the following case.)"
326 msgstr "例えば、以下のケースでは本来エラーになるべきですが、この問題があるとクラッシュします。(\"--query\"の値に閉じカッコが一つ多い点に着目してください。)"
327
328 msgid "Release 13.0.4 - 2023-07-26"
329 msgstr "13.0.4リリース - 2023-07-26"
330
331 msgid "[{doc}`/install/windows`] Stopped providing 32-bit packages."
332 msgstr "[{doc}`/install/windows`] 32-bit版パッケージの提供をやめました。"
333
334 msgid "[{doc}`/install/debian`] [{doc}`/install/ubuntu`] Fixed the default configuration file path for {doc}`/reference/query_expanders/tsv`."
335 msgstr "[{doc}`/install/debian`] [{doc}`/install/ubuntu`] {doc}`/reference/query_expanders/tsv`のデフォルトの設定ファイルのパスを修正しました。"
336
337 msgid "[CMake] Fixed a bug that some errors may be reported when CMake 3.16 or 3.17 are used."
338 msgstr "[CMake] CMake 3.16または3.17を使っている場合にエラーになることがある問題を修正しました。"
339
340 msgid "Release 13.0.3 - 2023-07-24"
341 msgstr "13.0.3リリース - 2023-07-24"
342
343 msgid "[{doc}`/reference/executables/groonga-httpd`] Extracted to [groonga-nginx](https://github.com/groonga/groonga-nginx). We stopped providing the `groonga-httpd` package."
344 msgstr "[{doc}`/reference/executables/groonga-httpd`] [groonga-nginx](https://github.com/groonga/groonga-nginx)に切り出されました。`groonga-httpd`パッケージの提供をやめました。"
345
346 msgid "If you're an user of Debian GNU/Linux 12+ or Ubuntu 23.10+, you can use the `libnginx-mod-http-groonga` package with the default `nginx` package. See [groonga-nginx's README](https://github.com/groonga/groonga-nginx#readme) for details."
347 msgstr "Debian GNU/Linux 12以降あるいはUbuntu 23.10以降のユーザーはデフォルトの`nginx`パッケージと一緒に使える`libnginx-mod-http-groonga`パッケージを使ってください。詳細は[groonga-nginxのREADME](https://github.com/groonga/groonga-nginx#readme)を参照してください。"
348
349 msgid "If you're an user of old Debian/Ubuntu or RHEL related distributions, you can't use any `groonga-httpd` equivalent package. You can use {doc}`/reference/executables/groonga-server-http` instead. If {doc}`/reference/executables/groonga-server-http` isn't suitable for your use case, please report it to [Discussions](https://github.com/groonga/groonga/discussions) with your use case."
350 msgstr "古いDebian/UbuntuまたはRHEL関連ディストリビューションのユーザーは`groonga-httpd`相当のパッケージを使うことはできません。代わりに{doc}`/reference/executables/groonga-server-http`を使うことができます。もし、{doc}`/reference/executables/groonga-server-http`があなたのユースケースでは適切ではない場合、あなたのユースケース付きで[Discussions](https://github.com/groonga/groonga/discussions)に報告してください。"
351
352 msgid "[{doc}`/install/ubuntu`] Added support for Ubuntu 23.10 (Mantic Minotaur)."
353 msgstr "[{doc}`/install/ubuntu`] Ubuntu 23.10(Mantic Minotaur)をサポートしました。"
354
355 msgid "[{doc}`/install/debian`] Enabled xxHash support."
356 msgstr "[{doc}`/install/debian`] xxHashサポートを有効にしました。"
357
358 msgid "[{doc}`/install/ubuntu`] Enabled xxHash support."
359 msgstr "[{doc}`/install/ubuntu`] xxHashサポートを有効にしました。"
360
361 msgid "Fixed a bug that the source archive can't be built with CMake."
362 msgstr "ソースアーカイブがCMakeでビルドできない問題を修正しました。"
363
364 msgid "Release 13.0.2 - 2023-07-12"
365 msgstr "13.0.2リリース - 2023-07-12"
366
367 msgid "[{doc}`/install/ubuntu`] Dropped support for Ubuntu 18.04 (Bionic Beaver)."
368 msgstr "[{doc}`/install/ubuntu`] Ubuntu 18.04(Bionic Beaver)のサポートをやめました。"
369
370 msgid "[{doc}`/install/ubuntu`] Added support for Ubuntu 23.04 (Lunar Lobster)."
371 msgstr "[{doc}`/install/ubuntu`] Ubuntu 23.04(Lunar Lobster)をサポートしました。"
372
373 msgid "[{doc}`/install/debian`] Added support for Debian GNU/Linux 12 (bookworm)."
374 msgstr "[{doc}`/install/debian`] Debian 12 (bookworm) をサポートしました。"
375
376 msgid "[Oracle Linux] Dropped support for Oracle Linux. Use {doc}`/install/almalinux` packages instead."
377 msgstr "[Oracle Linux] Oracle Linuxサポートをやめました。代わりに {doc}`/install/almalinux` 用パッケージを使ってください。"
378
379 msgid "[`grn_highlighter`] Added support for changing tag."
380 msgstr "[`grn_highlighter`] タグの変更をサポートしました。"
381
382 msgid "[GH-1453](https://github.com/groonga/groonga/issues/1453) [Reported by askdkc]"
383 msgstr "[GH-1453](https://github.com/groonga/groonga/issues/1453>) [askdkcさんが報告]"
384
385 msgid "[`grn_highlighter`] Added support for customizing normalizers."
386 msgstr "[`grn_highlighter`] ノーマライザーの変更をサポートしました。"
387
388 msgid "[`grn_highlighter`] Added support for customizing HTML mode."
389 msgstr "[`grn_highlighter`] HTMLモードの変更をサポートしました。"
390
391 msgid "[`grn_highlighter`] Added support for multiple tags."
392 msgstr "[`grn_highlighter`] 複数タグをサポートしました。"
393
394 msgid "[{doc}`/reference/functions/highlight`] Added the `sequential_class_tag_mode` option."
395 msgstr "[{doc}`/reference/functions/highlight`] `sequential_class_tag_mode` オプションを追加しました。"
396
397 msgid "[{doc}`/reference/functions/highlight_html`] Added the `sequential_class_tag_mode` option."
398 msgstr "[{doc}`/reference/functions/highlight_html`] `sequential_class_tag_mode` オプションを追加しました。"
399
400 msgid "[{doc}`/reference/commands/reference_acquire`] Changed to refer index columns that are for the target object when `--recursive dependent` is used."
401 msgstr "[{doc}`/reference/commands/reference_acquire`] `--recursive dependent` が使われたときに対象オブジェクト用のインデックスカラムも参照するように変更しました。"
402
403 msgid "If the target object is a column, index columns for the column is also referred."
404 msgstr "対象オブジェクトがカラムの場合、そのカラム用のインデックスカラムも参照されます。"
405
406 msgid "If the target object is a table, index columns for the table is also referred."
407 msgstr "対象オブジェクトがテーブルの場合、そのテーブル用のインデックスカラムも参照されます。"
408
409 msgid "If the target object is a DB, all tables are processed as target objects."
410 msgstr "対象オブジェクトがDBの場合、すべてのテーブルが対象オブジェクトになります。"
411
412 msgid "[CMake] Changed to require CMake 3.16 or later. We'll use CMake instead of GNU Autotools as our recommended build tool in near future and drop support for GNU Autotools eventually."
413 msgstr "[CMake] CMake 3.16以降を必須としました。近い将来、GNU AutotoolsではなくCMakeを推奨ビルドツールとし、いずれGNU Autotoolsサポートをやめる予定です。"
414
415 msgid "[CMake] Added support for CMake package. You can use it by `find_package(Groonga)`."
416 msgstr "[CMake] CMakeパッケージに対応しました。 `find_package(Groonga)` というように使えます。"
417
418 msgid "[Packaging] Changed to use newer GNU Autotools to generate `configure` in the source archive."
419 msgstr "[Packaging] ソースアーカイブ中の `configure` を生成しているGNU Autotoolsを更新しました。"
420
421 msgid "[`ranguba/rroonga#220 <https://github.com/ranguba/rroonga/issues/220>`_] [Reported by ZangRuochen]"
422 msgstr "[`ranguba/rroonga#220 <https://github.com/ranguba/rroonga/issues/220>`_] [ZangRuochenさんが報告]"
423
424 msgid "[{doc}`/reference/commands/reference_acquire`] Optimized reference count implementation for built-in objects."
425 msgstr "[{doc}`/reference/commands/reference_acquire`] 組み込みオブジェクト用のリファレンスカウント実装を最適化しました。"
426
427 msgid "Added support for logging backtrace on `SIGABRT`."
428 msgstr "`SIGABRT` 発生時もバックトレースのログ出力するようにしました。"
429
430 msgid "[{ref}`query-syntax-ordered-near-phrase-product-search-condition`] [{ref}`script-syntax-ordered-near-phrase-product-search-operator`] Fixed a search bug that records that should be matched may not be matched."
431 msgstr "[{ref}`query-syntax-ordered-near-phrase-product-search-condition`] [{ref}`script-syntax-ordered-near-phrase-product-search-operator`] マッチするべきレコードがマッチしないことがある問題を修正しました。"
432
433 msgid "It's happen when multiple 3+ tokens are overlapped in query. For example, `abc` and `abcd` are an invalid combination. If shorter one (`abc`) exists before longer one (`abcd`), this bug is happen. For example, `ONPP1 \"(abcd abc) (1 2)\"` works but `ONPP1 \"(abc abcd) (1 2)\"` doesn't work."
434 msgstr "この問題は、クエリー内に3つ以上トークンがあり、かつ、それらがオーバーラップしているときに発生します。たとえば、 `abc` と `abcd` はうまく動かない組み合わせです。もし、短い方( `abc` )が長い方( `abcd` )より前にある場合はこの問題は発生しません。たとえば、 `ONPP1 \"(abcd abc) (1 2)\"` は動きますが、 `ONPP1 \"(abc abcd) (1 2)\"` は動きません。"
435
436 msgid "Fixed a bug that invalid weight may be used with multiple adjusts."
437 msgstr "複数の重み調整演算子を使った場合、不正な重みが使われることがある問題を修正しました。"
438
439 msgid "[{doc}`/reference/grn_expr/query_syntax`] Fixed a typo."
440 msgstr "[{doc}`/reference/grn_expr/query_syntax`] 誤字を修正しました。"
441
442 msgid "[`GH-1560 <https://github.com/groonga/groonga/issues/1560>`_] [Patch by Dylan Golow]"
443 msgstr "[`GH-1560 <https://github.com/groonga/groonga/issues/1560>`_] [Dylan Golowさんがパッチ提供]"
444
445 msgid "[{ref}`query-syntax-near-phrase-search-condition`] [{ref}`script-syntax-near-phrase-search-operator`] [{ref}`query-syntax-near-phrase-product-search-condition`] [{ref}`script-syntax-near-phrase-product-search-operator`] [{ref}`query-syntax-ordered-near-phrase-search-condition`] [{ref}`script-syntax-ordered-near-phrase-search-operator`] [{ref}`query-syntax-ordered-near-phrase-product-search-condition`] [{ref}`script-syntax-ordered-near-phrase-product-search-operator`] Fixed an invalid interval calculation when `additional_last_interval` is used."
446 msgstr "[{ref}`query-syntax-near-phrase-search-condition`] [{ref}`script-syntax-near-phrase-search-operator`] [{ref}`query-syntax-near-phrase-product-search-condition`] [{ref}`script-syntax-near-phrase-product-search-operator`] [{ref}`query-syntax-ordered-near-phrase-search-condition`] [{ref}`script-syntax-ordered-near-phrase-search-operator`] [{ref}`query-syntax-ordered-near-phrase-product-search-condition`] [{ref}`script-syntax-ordered-near-phrase-product-search-operator`] `additional_last_interval` を使っている場合、距離の計算が間違っている問題を修正しました。"
447
448 msgid "For example, let's think about `*NP3,-1\"aaa bbb .$\"` against `aaaxxxbbbcdefghi.` In this case, the number of tokens between `aaa` and `bbb` must be 3 but it was 7."
449 msgstr "たとえば、 `aaaxxxbbbcdefghi.` に対して `*NP3,-1\"aaa bbb .$\"` で検索するケースを考えます。このケースでは `aaa` と `bbb` の間のトークン数は3であるべきですが7になっていました。"
450
451 msgid "[{ref}`query-syntax-near-phrase-product-search-condition`] [{ref}`script-syntax-near-phrase-product-search-operator`] [{ref}`query-syntax-ordered-near-phrase-product-search-condition`] [{ref}`script-syntax-ordered-near-phrase-product-search-operator`] Fixed infinite loop bugs when the same phrase exists in the same phrase group."
452 msgstr "[{ref}`query-syntax-near-phrase-product-search-condition`] [{ref}`script-syntax-near-phrase-product-search-operator`] [{ref}`query-syntax-ordered-near-phrase-product-search-condition`] [{ref}`script-syntax-ordered-near-phrase-product-search-operator`] 同じフレーズグループ内に同じフレーズが存在するときに無限ループする問題を修正しました。"
453
454 msgid "For example, `*NPP1 \"(abcd abc abcd bcde) (efghi)\"` is a bad query because the first phrase group has two `abcd` phrases."
455 msgstr "たとえば、 `*NPP1 \"(abcd abc abcd bcde) (efghi)\"` は問題が発生するクエリーです。なぜなら最初のフレーズグループ内に2つ `abcd` が存在するからです。"
456
457 msgid "For example, `*NPP1 \"(abcde \\\"abc de\\\") (efghi)\"` is a bad query because the first phrase group has `abcde` and `\"abc de\"`. They are \"logically\" the same phrases."
458 msgstr "たとえば、 `*NPP1 \"(abcde \\\"abc de\\\") (efghi)\"` は問題が発生するクエリーです。なぜなら最初のフレーズグループ内に `abcde` と `\"abc de\"` が存在するからです。これらは「論理的に」同じフレーズです。"
459
460 msgid "Fixed a bug that internal lock count may not be decreased when lock acquisition is failed. In normal use-case, this will not be a real problem."
461 msgstr "ロック獲得に失敗した場合に内部のロックカウントを減らしていない問題を修正しました。通常はこれが問題になることはありません。"
462
463 msgid "askdkc"
464 msgstr "askdkcさん"
465
466 msgid "Dylan Golow"
467 msgstr "Dylan Golowさん"
468
469 msgid "ZangRuochen"
470 msgstr "ZangRuochenさん"
471
472 msgid "Release 13.0.1 - 2023-03-24"
473 msgstr "13.0.1リリース - 2023-03-24"
474
475 msgid "[{doc}`/reference/functions/highlight_html`] Added support for prefix search."
476 msgstr "[{doc}`/reference/functions/highlight_html`] 前方一致検索をサポートしました。"
477
478 msgid "We can now use prefix search in `highlight_html`."
479 msgstr "`highlight_html` で前方一致検索ができるようになりました。"
480
481 msgid "Note that highlight keyword is also highlighted not only at the first but also in the middle or at the end."
482 msgstr "ただし、ハイライトするキーワードは、最初の出現箇所だけでなく、途中および最後の出現箇所もハイライトされます。"
483
484 msgid "[{doc}`/reference/normalizers`] Added new options for NormalizerNFKC\\*."
485 msgstr "[{doc}`/reference/normalizers`] `NormalizerNFKC\\*` に新しいオプションを追加しました。"
486
487 msgid "`unify_kana_prolonged_sound_mark`"
488 msgstr ""
489
490 msgid "We can now normalize prolonged_sound_mark with this option as below."
491 msgstr "このオプションによって、長音記号を以下のように正規化できます。"
492
493 msgid "Here is an example of `unify_kana_prolonged_sound_mark`."
494 msgstr "以下は、 `unify_kana_prolonged_sound_mark` オプションの使用例です。"
495
496 msgid "`unify_kana_hyphen`"
497 msgstr ""
498
499 msgid "We can now normalize hyphen with this option as below."
500 msgstr "このオプションを使うことで、ハイフンを以下のように正規化できます。"
501
502 msgid "Here is an example of `unify_kana_hyphen`."
503 msgstr "以下は、 `unify_kana_hyphen` オプションの使用例です。"
504
505 msgid "[{ref}`query-syntax-near-search-condition`][{ref}`script-syntax-near-search-operator`] Added a new option `${MIN_INTERVAL}` for near-search family."
506 msgstr "[{ref}`query-syntax-near-search-condition`][{ref}`script-syntax-near-search-operator`] 各近傍検索に `${MIN_INTERVAL}` オプションを追加しました。"
507
508 msgid "We can now specify the minimum interval between phrases (words) with `${MIN_INTERVAL}`. The interval between phrases (words) must be at least this value."
509 msgstr "`${MIN_INTERVAL}` でフレーズ間(単語間)の最低距離を指定できるようになりました。フレーズ間(単語間)の距離は、最低でもこの値以上である必要があります。"
510
511 msgid "Here are new syntax:"
512 msgstr "新しい構文は以下のとおりです。"
513
514 msgid "The default value of `${MIN_INTERVAL}` is `INT32_MIN` (`-2147483648`). We use the default value when `${MIN_INTERVAL}` is omitted."
515 msgstr "`${MIN_INTERVAL}` のデフォルト値は `INT32_MIN` (`-2147483648`) です。`${MIN_INTERVAL}` を省略した場合デフォルト値が使用されます。"
516
517 msgid "This option is useful when we want to ignore overlapped phrases."
518 msgstr "このオプションは重複したフレーズを無視するのに便利です。"
519
520 msgid "The interval for `*NP` is culculated as `interval between the top tokens of phrases - tokens in the left phrase + 1`."
521 msgstr "`*NP` の距離は `各フレーズの先頭のトークンの距離 - 左のフレーズのトークン数 + 1` で計算されます。"
522
523 msgid "When a tokenizer is Bigram, for exmaple, `東京` has one token `東京`, also `京都` has one token `京都`."
524 msgstr "トークナイザーがバイグラムの場合を考えると、例えば、 `東京` は `東京` という一つのトークンを持ち、 `京都` は `京都` という一つのトークンを持ちます。"
525
526 msgid "Considering `東京都` as a target value of `*NP \"東京 京都\"`:"
527 msgstr "`*NP \"東京 京都\"` の対象の値として `東京都` を考えてみます。"
528
529 msgid "`interval between the top tokens of phrases`: `1` (interval between `東京` and `京都`)"
530 msgstr "`各フレーズの先頭のトークンの距離`: `1` (`東京` と `京都` の距離)"
531
532 msgid "`tokens in the left phrase`: `1` ( `東京` )"
533 msgstr "`左のフレーズのトークン数`: `1` ( `東京` )"
534
535 msgid "The interval for `*NP` of `東京都` is `1 - 1 + 1` = `1`."
536 msgstr "`東京都` に対して `*NP` で使われる距離は、 `1 - 1 + 1` = `1` となります。"
537
538 msgid "As a result, the interval for `*NP` is greater than `1` when `東京` and `京都` are not overlapped."
539 msgstr "結果として、 `東京` と `京都` が重複していないとき、 `*NP` で使われる距離は `1` より大きくなります。"
540
541 msgid "Here is an example for ignoring overlapped phrases."
542 msgstr "このオプションは重複したフレーズを無視するのに便利です。"
543
544 msgid "In the example above, `東京都` is not matched as the interval is `1` but `東京京都` is matched as the interval is `2`."
545 msgstr "上記の例では、 `東京都` は距離が `1` なのでマッチしませんが、 `東京京都` は距離が `2` なのでマッチします。"
546
547 msgid "[{doc}`/reference/normalizers`] Added support for new values in the `unify_katakana_trailing_o` option."
548 msgstr "[{doc}`/reference/normalizers`] `unify_katakana_trailing_o` オプションで新しい値をサポートしました。"
549
550 msgid "We added support for normalizing the following new values in the `unify_katakana_trailing_o` option because a vowel of those left letters is `O`."
551 msgstr "`unify_katakana_trailing_o` で以下の新しい値のノーマライズをサポートしました。これらの左側の文字の母音が `オ` なので、ノーマライズすべきなためです。"
552
553 msgid "`ォオ` -> `ォウ`"
554 msgstr ""
555
556 msgid "`ョオ` -> `ョウ`"
557 msgstr ""
558
559 msgid "`ヺオ` -> `ヺウ`"
560 msgstr ""
561
562 msgid "Add support for MessagePack v6.0.0. [GitHub#1536][Reported by Carlo Cabrera]"
563 msgstr "MessagePack v6.0.0 をサポートしました。 [GitHub#1536][Reported by Carlo Cabrera]"
564
565 msgid "Groonga can not found MessagePack v6.0.0 or later when we execute configure or cmake until now. Groonga can found MessagePack since this release even if the version of MessagePack is v6.0.0 or later."
566 msgstr "今まで、Groongaは `configure` または `cmake` 実行時にMessagePack v6.0.0以降のMessagePackを検出できませんでした。このリリースから、MessagePackがv6.0.0以降であっても検出できるようになります。"
567
568 msgid "[{doc}`/reference/normalizers`] Fixed a bug that NormalizerNFKC\\* did incorrect normalization."
569 msgstr "[{doc}`/reference/normalizers`] NormalizerNFKC\\*が不正な正規化をする問題を修正しました。"
570
571 msgid "This bug occured when `unify_kana_case` and `unify_katakana_v_sounds` used at the same time."
572 msgstr "この問題は、 `unify_kana_case` と `unify_katakana_v_sounds` を同時に使う場合に発生します。"
573
574 msgid "For example, `ヴァ` was normalized to `バア` with `unify_kana_case` and `unify_katakana_v_sounds`, but `ヴァ` should be normalized to `バ`."
575 msgstr "例えば、 `unify_kana_case` と `unify_katakana_v_sounds` を同時に使うとき、 `ヴァ` が `バア` にノーマライズされていました。しかし `ヴァ` は `バ` と正規化されるべきです。"
576
577 msgid "This was because `ヴァ` was normalized to `ヴア` with `unify_kana_case`, and after that, `ヴア` was normalized to `バア` with `unify_katakana_v_sounds`. We fixed to normalize characters with `unify_katakana_v_sounds` before `unify_kana_case`."
578 msgstr "これは、 `unify_kana_case` で `ヴァ` が `ヴア` と正規化され、その後、 `unify_katakana_v_sounds` によって `ヴア` が `バア` と正規化されていたことが原因です。`unify_katakana_v_sounds` が `unify_kana_case` より前に適用されるように修正しました。"
579
580 msgid "Here is an example of the bug in the previous version."
581 msgstr "以下は以前のバージョンでの問題の発生例です。"
582
583 msgid "From this version, `ヴァーチャル` is normalized to `バーチヤル`."
584 msgstr "このバージョンから、 `ヴァーチャル` は `バーチヤル` にノーマライズされます。"
585
586 msgid "[{ref}`query-syntax-ordered-near-phrase-search-condition`][{ref}`script-syntax-ordered-near-phrase-search-operator`] Fixed a bug that `${MAX_PHRASE_INTERVALS}` doesn't work correctly."
587 msgstr "[{ref}`query-syntax-ordered-near-phrase-search-condition`][{ref}`script-syntax-ordered-near-phrase-search-operator`] `${MAX_PHRASE_INTERVALS}` が正しく動かない問題を修正しました。"
588
589 msgid "When this bug occured, intervals are regarded as `0`. Therefore, if this bug occurs, records may hit too many."
590 msgstr "この問題が発生したとき、距離は `0` とみなされます。したがって、この問題が発生した場合、余分にレコードがヒットすることがあります。"
591
592 msgid "This bug occured when:"
593 msgstr "この問題は以下の場合に発生します。"
594
595 msgid "Use `*ONP` with `${MAX_PHRASE_INTERVALS}`"
596 msgstr "`*ONP` で `${MAX_PHRASE_INTERVALS}` を使用している"
597
598 msgid "The number of tokens in the matched left phrase is greater than or equal to the number of `${MAX_PHRASE_INTERVALS}` elements."
599 msgstr "マッチした左側のフレーズに含まれるトークンの数が、 `${MAX_PHRASE_INTERVALS}` で指定した要素数より多い"
600
601 msgid "Here is an example of this bug."
602 msgstr "以下はこの問題の例です。"
603
604 msgid "In the example above, the first element interval is specified as `1` with `*ONP-1,0,1 \"abc def\"`, but all `content` is matched, including those farther than `1`."
605 msgstr "上記の例では、 `*ONP-1,0,1 \"abc def\"` で、最初の要素の距離に `1` を指定しています。しかし、距離が `1` より離れているものも含めた、すべての `content` がマッチしています。"
606
607 msgid "This is because the example satisfies the condition for the bug and the interval is regarded as `0`."
608 msgstr "これは、この例がこの問題の発生条件を満たしていて、距離が `0` とみなされているためです。"
609
610 msgid "`*ONP-1,0,1 \"abc def\"` specifies `${MAX_PHRASE_INTERVALS}`."
611 msgstr "`*ONP-1,0,1 \"abc def\"` は `${MAX_PHRASE_INTERVALS}` を使用している。"
612
613 msgid "The matched left phrase: `abc`"
614 msgstr "マッチした左側のフレーズ: `abc`"
615
616 msgid "Included tokens: `ab`, `bc`"
617 msgstr "含まれるトークン: `ab` 、 `bc`"
618
619 msgid "Tokenized with `TokenNgram(\"unify_alphabet\", false, \"unify_digit\", false)`"
620 msgstr "`TokenNgram(\"unify_alphabet\", false, \"unify_digit\", false)` によるトークナイズ"
621
622 msgid "The number of elements specified with `max_element_intervals`: `1`"
623 msgstr "左側のフレーズに含まれるトークン数 (`2`) > `max_element_intervals` にに含まれる要素数 (`1`)"
624
625 msgid "`1` of `*ONP-1,0,1 \"abc def\"`"
626 msgstr "`*ONP-1,0,1 \"abc def\"` の `1`"
627
628 msgid "The number of tokens in the left phrase (`2`) > the number of elements specified with `max_element_intervals` (`1`)"
629 msgstr "左側のフレーズに含まれるトークン数 (`2`) > `max_element_intervals` にに含まれる要素数 (`1`)"
630
631 msgid "[{ref}`query-syntax-near-phrase-search-condition`][{ref}`script-syntax-near-phrase-search-operator`] Fixed a bug that phrases specified as last didn't used as last in near-phrase family."
632 msgstr "[{ref}`query-syntax-near-phrase-search-condition`][{ref}`script-syntax-near-phrase-search-operator`] 各近傍フレーズ検索で、最後として指定したフレーズが最後として使用されない問題を修正しました。"
633
634 msgid "When this bug occured, `${ADDITIONAL_LAST_INTERVAL}` was ignored and only `${MAX_INTERVAL}` was used."
635 msgstr "この問題が発生すると `${ADDITIONAL_LAST_INTERVAL}` は無視され、 `${MAX_INTERVAL}` が使用されます。"
636
637 msgid "A phrase specified as last contains multiple tokens."
638 msgstr "最後として指定されたフレーズが複数のトークンを含む"
639
640 msgid "The size of the last token of the phrase is smaller than or equals to the sizes of other tokens in the phrase."
641 msgstr "そのフレーズの最後のトークンのサイズが、他のトークンのサイズ以下である"
642
643 msgid "The token size is the number of tokens appeared in the all records."
644 msgstr "トークンサイズとは、全レコード中に出現するそのトークンの数です。"
645
646 msgid "In the example above, for `abc123456789defg`, the interval `abc` to `defg` is `11`. `${MAX_INTERVAL}` is `10` and `${ADDITIONAL_LAST_INTERVAL}` is `1`, so a threshold for matching last phrase is `11`. So it should be matched, but isn't."
647 msgstr "上記の例の `abc123456789defg` について考えると、 `abc` から `defg` までの距離は `11` です。 `${MAX_INTERVAL}` は `10` で `${ADDITIONAL_LAST_INTERVAL}` は `1` が指定されています。したがって、最後のフレーズがマッチするしきい値は11になります。以上から、 `abc123456789defg` はマッチするはずですが、していません。"
648
649 msgid "This is because the example satisfies the condition for the bug as below, and only ``${MAX_INTERVAL}` is used."
650 msgstr "これは、この例が、以下のようにこの問題の発生条件を満たしていて、`${MAX_INTERVAL}` のみが使われているためです。"
651
652 msgid "`defg$` is specified as last because the suffix is `$`."
653 msgstr "最後に `$` がついているので、 `defg$` は最後と指定されています。"
654
655 msgid "`defg$` is tokenized to `de`, `ef`, `fg` with `TokenNgram(\"unify_alphabet\", false, \"unify_digit\", false)`"
656 msgstr "`defg$` は `TokenNgram(\"unify_alphabet\", false, \"unify_digit\", false)` によって `de`, `ef`, `fg` にトークナイズされます。"
657
658 msgid "`fg` is the last token of `defg$`. `abc123456789defg` contains one `fg` and `de`, and `dededede` contains 4 `de`."
659 msgstr "`fg` は `defg$` の最後のトークンです。 `abc123456789defg` は1つの `fg` と `de` を含みます。そして、 `dededede` は4つの `de` を含みます。"
660
661 msgid "So, the size of `fg` is 1 and `de` is 5."
662 msgstr "したがって、 `fg` のサイズは `1` で、 `de` のサイズは `5` です。"
663
664 msgid "[{ref}`query-syntax-near-phrase-search-condition`] Fixed interval calculation."
665 msgstr "[{ref}`query-syntax-near-phrase-search-condition`] 距離の計算方法を修正しました。"
666
667 msgid "If we use near phrase search, records may hit too many by this bug."
668 msgstr "この問題によって、近傍フレーズ検索を使った場合に、ヒットしないはずのレコードがヒットすることがあります。"
669
670 msgid "[{doc}`/reference/functions/highlight_html`] Fixed a bug that highlight position may move over when we use `loose_symbol=true`."
671 msgstr "[{doc}`/reference/functions/highlight_html`] `loose_symbol=true` の時にハイライト位置がずれることがある問題を修正しました。"
672
673 msgid "Carlo Cabrera"
674 msgstr "Carlo Cabreraさん"
675
676 msgid "Release 13.0.0 - 2023-02-09"
677 msgstr "13.0.0リリース - 2023-02-09"
678
679 msgid "This is a major version up! But It keeps backward compatibility. We can upgrade to 13.0.0 without rebuilding database."
680 msgstr "メジャーバージョンアップです! メジャーバージョンアップですが、互換性は壊れていないので、データベースを再構築することなく13.0.0へアップグレードできます。"
681
682 msgid "First of all, we introduce the main changes in 13.0.0. Then, we introduce the hilight and summary of changes from Groonga 12.0.0 to 12.1.2."
683 msgstr "まずはじめに 13.0.0の主な変更点を紹介します。次に、Groonga 12.0.0 から 12.1.2 までの変更点を紹介します。"
684
685 msgid "[{doc}`/reference/normalizers`] Added a new Normalizer `NormalizerNFKC150` based on Unicode NFKC (Normalization Form Compatibility Composition) for Unicode 15.0."
686 msgstr "[{doc}`/reference/normalizers`] Unicode 15.0 の NFKC(Normalization Form Compatibility Composition)をベースにしたノーマライザー `NormalizerNFKC150` を新しく追加しました。"
687
688 msgid "[{doc}`/reference/token_filters`] Added a new TokenFilter `TokenFilterNFKC150` based on Unicode NFKC (Normalization Form Compatibility Composition) for Unicode 15.0."
689 msgstr "[{doc}`/reference/token_filters`] Unicode 15.0 の NFKC(Normalization Form Compatibility Composition)をベースにしたトークンフィルター `TokenFilterNFKC150` を新しく追加しました。"
690
691 msgid "[{doc}`/reference/normalizers/normalizer_nfkc150`] Added new options for NormalizerNFKC\\* as below."
692 msgstr "[{doc}`/reference/normalizers/normalizer_nfkc150`] `NormalizerNFKC\\*` に以下の新しいオプションを追加しました。"
693
694 msgid "`unify_katakana_gu_small_sounds`"
695 msgstr ""
696
697 msgid "We can normalize \"グァ -> ガ\", \"グィ -> ギ\", \"グェ -> ゲ\", and \"グォ -> ゴ\" with this option."
698 msgstr "このオプションを使うことで、\"グァ -> ガ\", \"グィ -> ギ\", \"グェ -> ゲ\", \"グォ -> ゴ\"と正規化できます。"
699
700 msgid "Here is an example of `unify_katakana_gu_small_sounds` option."
701 msgstr "以下は `unify_katakana_gu_small_sounds` オプションの使用例です。"
702
703 msgid "`unify_katakana_di_sound`"
704 msgstr ""
705
706 msgid "We can normalize \"ヂ -> ジ\" with this option."
707 msgstr "このオプションを使うことで、\"ヂ -> ジ\"と正規化できます。"
708
709 msgid "Here is an example of `unify_katakana_di_sound` option."
710 msgstr "以下は、 `unify_katakana_di_sound` オプションの使用例です。"
711
712 msgid "`unify_katakana_wo_sound`"
713 msgstr ""
714
715 msgid "We can normalize \"ヲ -> オ\" with this option."
716 msgstr "このオプションを使うことで、\"ヲ -> オ\"と正規化できます。"
717
718 msgid "Here is an example of `unify_katakana_wo_sound` option."
719 msgstr "以下は、 `unify_katakana_wo_sound` オプションの使用例です。"
720
721 msgid "`unify_katakana_zu_small_sounds`"
722 msgstr ""
723
724 msgid "We can normalize \"ズァ -> ザ\", \"ズィ -> ジ\", \"ズェ -> ゼ\", and \"ズォ -> ゾ\" with this option."
725 msgstr "このオプションを使うことで、\"ズァ -> ザ\", \"ズィ -> ジ\", \"ズェ -> ゼ\", \"ズォ -> ゾ\"と正規化できます。"
726
727 msgid "Here is an example of `unify_katakana_zu_small_sounds` option."
728 msgstr "以下は、 `unify_katakana_zu_small_sounds` オプションの使用例です。"
729
730 msgid "`unify_katakana_du_sound`"
731 msgstr ""
732
733 msgid "We can normalize \"ヅ -> ズ\" with this option."
734 msgstr "このオプションを使うことで、\"ヅ -> ズ\"と正規化できます。"
735
736 msgid "Here is an example of `unify_katakana_du_sound` option."
737 msgstr "以下は、 `unify_katakana_du_sound` オプションの使用例です。"
738
739 msgid "`unify_katakana_trailing_o`"
740 msgstr ""
741
742 msgid "We can normalize following characters with this option."
743 msgstr "このオプションによって、以下の文字を正規化できます。"
744
745 msgid "\"オオ -> オウ\""
746 msgstr ""
747
748 msgid "\"コオ -> コウ\""
749 msgstr ""
750
751 msgid "\"ソオ -> ソウ\""
752 msgstr ""
753
754 msgid "\"トオ -> トウ\""
755 msgstr ""
756
757 msgid "\"ノオ -> ノウ\""
758 msgstr ""
759
760 msgid "\"ホオ -> ホウ\""
761 msgstr ""
762
763 msgid "\"モオ -> モウ\""
764 msgstr ""
765
766 msgid "\"ヨオ -> ヨウ\""
767 msgstr ""
768
769 msgid "\"ロオ -> ロウ\""
770 msgstr ""
771
772 msgid "\"ゴオ -> ゴウ\""
773 msgstr ""
774
775 msgid "\"ゾオ -> ゾウ\""
776 msgstr ""
777
778 msgid "\"ドオ -> ドウ\""
779 msgstr ""
780
781 msgid "\"ボオ -> ボウ\""
782 msgstr ""
783
784 msgid "\"ポオ -> ポウ\""
785 msgstr ""
786
787 msgid "Here is an example of `unify_katakana_trailing_o` option."
788 msgstr "以下は、 `unify_katakana_trailing_o` オプションの使用例です。"
789
790 msgid "`unify_katakana_du_small_sounds`"
791 msgstr ""
792
793 msgid "We can normalize \"ヅァ -> ザ\", \"ヅィ -> ジ\", \"ヅェ -> ゼ\", and \"ヅォ -> ゾ\" with this option."
794 msgstr "このオプションを使うことで、 \"ヅァ -> ザ\", \"ヅィ -> ジ\", \"ヅェ -> ゼ\", \"ヅォ -> ゾ\"と正規化できます。"
795
796 msgid "Here is an example of `unify_katakana_du_small_sounds` option."
797 msgstr "以下は、 `unify_katakana_du_small_sounds` オプションの使用例です。"
798
799 msgid "[Oracle Linux] Added newly support for Oracle Linux 8 and 9."
800 msgstr "[Oracle Linux] Oracle Linux 8と9 向けのパッケージを新しくサポートしました。"
801
802 msgid "Atsushi Shinoda"
803 msgstr "篠田さん"
804
805 msgid "i10a"
806 msgstr "i10aさん"
807
808 msgid "naoa"
809 msgstr "naoaさん"
810
811 msgid "shinonon"
812 msgstr "shinononさん"
813
814 msgid "Zhanzhao (Deo) Liang"
815 msgstr "Zhanzhao (Deo) Liangさん"
816
817 msgid "David CARLIER"
818 msgstr "David CARLIERさん"
819
820 msgid "Higlight and Summary of changes from 12.0.0 to 12.1.2"
821 msgstr "Groonga 12.0.0 から 12.1.2 までの主な変更点"
822
823 msgid "Higlight"
824 msgstr "ハイライト"
825
826 msgid "[{ref}`release-12-0-9`]"
827 msgstr ""
828
829 msgid "[{doc}`/reference/normalizers`] Added `NormalizerHTML`. (Experimental)"
830 msgstr "[{doc}`/reference/normalizers`] `NormalizerHTML` を追加しました。(実験的)"
831
832 msgid "`NormalizerHTML` is a normalizer for HTML."
833 msgstr "`NormalizerHTML` はHTML用のノーマライザーです。"
834
835 msgid "Currently `NormalizerHTML` supports removing tags like `<span>` or `</span>` and expanding character references like `&amp;` or `&#38;`."
836 msgstr "現在 `NormalizerHTML` は `<span>` や `</span>` といったタグの削除と、`&amp;` や `&#38;` といった文字参照の展開を行います。"
837
838 msgid "Here are sample queries for `NormalizerHTML`."
839 msgstr "以下は `NormalizerHTML` の例です。"
840
841 msgid "In this sample `<span>` and `</span>` are removed, and `&amp;` and `&#38;` are expanded to `&`."
842 msgstr "この例では、 `<span>` と `</span>` は削除され、 `&amp;` と `&#38;` は `&` に展開されています。"
843
844 msgid "We can specify whether removing the tags with the `remove_tag` option. (The default value of the `remove_tag` option is `true`.)"
845 msgstr "タグを削除するかどうかは `remove_tag` オプションで指定できます。(`remove_tag` オプションのデフォルト値は `true` です。)"
846
847 msgid "In this sample, `<span>` and `</span>` are not removed."
848 msgstr "この例では、 `<span>` と `</span>` は削除されていません。"
849
850 msgid "We can specify whether expanding the character references with the `expand_character_reference` option. (The default value of the `expand_character_reference` option is `true`.)"
851 msgstr "文字参照を展開するかどうかは `expand_character_reference` オプションで指定できます。(`expand_character_reference` オプションのデフォルト値は `true` です。)"
852
853 msgid "In this sample, `&amp;` and `&#38;` are not expanded."
854 msgstr "この例では、 `&amp;` と `&#38;` は展開されていません。"
855
856 msgid "[{ref}`release-12-0-3`]"
857 msgstr ""
858
859 msgid "[{doc}`/reference/functions/snippet`],[{doc}`/reference/functions/snippet_html`] Added support for text vector as input. [groonga-dev,04956][Reported by shinonon]"
860 msgstr "[{doc}`/reference/functions/snippet`],[{doc}`/reference/functions/snippet_html`] 入力としてベクターをサポートしました。[groonga-dev,04956][Reported by shinonon]"
861
862 msgid "For example, we can extract snippets of target text around search keywords against vector in JSON data as below."
863 msgstr "例えば、以下のようにJSONデータ内のベクターに対して検索キーワードの周辺テキストを抽出できます。"
864
865 msgid "Until now, if we specified `snippet*` like `--output_columns 'snippet_html(contents[1])`, we could extract snippets of target text around search keywords against the vector as below. However, we didn't know which we should output elements. Because we didn't know which element was hit on search."
866 msgstr "今までも、 `--output_columns 'snippet_html(contents[1])'` のように `snippet*` を指定することで以下のようにベクターに対して検索キーワードの周辺テキストを抽出できますが、この方法ではどの要素を出力すればよいかわかりません。どの要素が検索にヒットしたかわからないためです。"
867
868 msgid "[{ref}`release-12-0-1`]"
869 msgstr ""
870
871 msgid "[{doc}`/reference/commands/query_expand`] Added a support for synonym group."
872 msgstr "[{doc}`/reference/commands/query_expand`] 同義語グループをサポートしました。"
873
874 msgid "Until now, We had to each defined a keyword and synonyms of the keyword as below when we use the synonym search."
875 msgstr "同義語検索をする場合、今までは、以下のようにキーワードとその同義語をそれぞれ定義していました。"
876
877 msgid "In the above case, if we search `mroonga`, Groonga search `mroonga OR tritonn OR \"groonga mysql\"` as we intended. However, if we search `tritonn`, Groonga search only `tritonn`. If we want to search `tritonn OR mroonga OR \"groonga mysql\"` even if we search `tritonn`, we need had added a definition as below."
878 msgstr "上記のケースでは、`mroonga` を検索した場合、 Groongaは、意図通り、 `mroonga OR tritonn OR \"groonga mysql\" を検索しますが、`tritonn` を検索した場合は、 Groongaは、 `tritonn` のみを検索します。`tritonn` を検索した場合でも、`tritonn OR mroonga OR \"groonga mysql\"` と検索した場合、以下のように定義を追加する必要がありました。"
879
880 msgid "In many cases, if we expand `mroonga` to `mroonga OR tritonn OR \"groonga mysql\"`, we feel we want to expand `tritonn` and `\"groonga mysql\"` to `mroonga OR tritonn OR \"groonga mysql\"`. However, until now, we had needed additional definitions in such a case. Therefore, if target keywords for synonyms are many, we are troublesome to define synonyms. Because we need to define many similar definitions."
881 msgstr "多くのケースでは、 `mroonga` を `mroonga OR tritonn OR \"groonga mysql\"` と展開した場合、 `tritonn` や `\"groonga mysql\"` も `mroonga OR tritonn OR \"groonga mysql\"` と展開して欲しくなりますが、今までは、そのようなケースでは定義を追加する必要がありました。したがって、対象のキーワードに同義語がたくさんあると、同じような定義をたくさん定義する必要があるため、同義語の定義が煩雑でした。"
882
883 msgid "In addition, when we remove synonyms, we are troublesome because we need to execute remove against many records."
884 msgstr "加えて、同義語を削除する際も、多くのレコードを削除する必要があるので面倒でした。"
885
886 msgid "We can make a group by deciding on a representative synonym record since this release. For example, the all following keywords are the \"mroonga\" group."
887 msgstr "今回のリリースから同義語の代表値を決めることで一つのグループを作れるようになりました。例えば、以下のすべてのキーワードは、 \"mroonga\" グループです。"
888
889 msgid "In this case, `mroonga` is expanded to `mroonga OR tritonn OR \"groonga mysql\"`. In addition, `tritonn` and `\"groonga mysql\"` are also expanded to `mroonga OR tritonn OR \"groonga mysql\"`."
890 msgstr "このケースでは、 `mroonga` は `mroonga OR tritonn OR \"groonga mysql\"` と展開されます。また、 `tritonn` や `\"groonga mysql\"` も `mroonga OR tritonn OR \"groonga mysql\"` と展開されます。"
891
892 msgid "When we want to remove synonyms, we execute just remove against a target record. For example, if we want to remove `\"groonga mysql\"` from synonyms, we just remove `{\"_key\": \"groonga mysql\": \"representative\": \"mroonga\"}`."
893 msgstr "同義語を削除する際も、対象のレコードを削除するだけです。例えば、同義語から `\"groonga mysql\"` を削除する場合は、 `{\"_key\": \"groonga mysql\": \"representative\": \"mroonga\"}` を削除するだけです。"
894
895 msgid "[{ref}`release-12-0-0`]"
896 msgstr ""
897
898 msgid "[index_column_have_source_record] Added a new function `index_column_have_source_record()`."
899 msgstr "[index_column_have_source_record] 新しい関数 `index_column_have_source_record()` を追加しました。"
900
901 msgid "We can confirm whether a token that is existing in the index is included in any of the records that are registered in Groonga or not."
902 msgstr "インデックスに存在するトークンがGroongaに登録されているいずれかのレコードに含まれているかどうかを確認できます。"
903
904 msgid "Groonga does not remove a token even if the token become never used from records in Groonga by updating records. Therefore, for example, when we use the feature of autocomplete, Groonga may return a token that is not included in any of the records as candidates for search words. However, we can become that we don't return the needless token by using this function."
905 msgstr "Groongaは、レコードの更新によってどのレコードからも使われていないトークンがあっても、それを削除しません。したがって、例えば、オートコンプリート機能を使っていると、検索候補としてどのレコードにも含まれていないトークンを返す可能性がありますが、この関数をつかうことで、不要なトークンを返さないようにできます。"
906
907 msgid "Because this function can detect a token that is not included in any of the records."
908 msgstr "この関数は、トークンがどのレコードにも含まれていないことを検出できるからです。"
909
910 msgid "[{doc}`/reference/commands/select`] Added new arguments `drilldown_max_n_target_records` and `drilldown[${LABEL}].max_n_target_records`."
911 msgstr "[{doc}`/reference/commands/select`] 新しい引数 `drilldown_max_n_target_records` と `drilldown[${LABEL}].max_n_target_records` を追加しました。"
912
913 msgid "We can specify the max number of records of the drilldown target table (filtered result) to use drilldown. If the number of filtered result is larger than the specified value, some records in filtered result aren't used for drilldown. The default value of this arguments are `-1`. If these arguments are set `-1`, Groonga uses all records for drilldown."
914 msgstr "ドリルダウン対象のテーブル(フィルター結果)の中のうち最大で何レコードをドリルダウンに使うかを指定します。もし、フィルター結果のレコード数が指定した値より大きかったらフィルターした結果内のいくつかのレコードはドリルダウンには使われません。これらの引数のデフォルト値は、 `-1` です。これらの引数に `-1` がセットされた場合、Groongaは全てのレコードをドリルダウンに使います。"
915
916 msgid "This argument is useful when filtered result may be very large. Because a drilldown against large filtered result may be slow. We can limit the max number of records to be used for drilldown by this feature."
917 msgstr "この機能はフィルター結果が非常に大きくなるかもしれない場合に有用です。大きなフィルター結果に対するドリルダウンは遅くなることがあるためです。この機能を使うことでドリルダウンに使うレコード数を制限できます。"
918
919 msgid "Here is an example to limit the max number of records to be used for drilldown. The last 2 records, `{\\\"_id\\\": 4, \\\"tag\\\": \\\"Senna\\\"}` and `{\\\"_id\\\": 5, \\\"tag\\\": \\\"Senna\\\"}`, aren't used."
920 msgstr "以下はドリルダウンに使う最大レコード数を制限する例です。最後の2レコード( `{\"_id\": 4, \"tag\": \"Senna\"}` と `{\"_id\": 5, \"tag\": \"Senna\"}` )は使われていません。"
921
922 msgid "Summary"
923 msgstr "概要"
924
925 msgid "[{ref}`release-12-1-2`]"
926 msgstr ""
927
928 msgid "[httpd] Updated bundled nginx to 1.23.3."
929 msgstr "[httpd] バンドルしているnginxのバージョンを1.23.3に更新しました。"
930
931 msgid "[{ref}`release-12-1-1`]"
932 msgstr ""
933
934 msgid "[{doc}`/reference/commands/select`][{ref}`select-drilldowns-label-key-vector-expansions-power-set`] Vector's power set is now able to aggregate with the drilldowns."
935 msgstr "[{doc}`/reference/commands/select`][{ref}`select-drilldowns-label-key-vector-expansions-power-set`] ドリルダウンでベクターのべき集合を集計できるようになりました。"
936
937 msgid "[{doc}`/reference/commands/select`] Specific element of vector column is now able to be search target."
938 msgstr "[{doc}`/reference/commands/select`] ベクターカラムの特定の要素のみを対象に検索できるようになりました。"
939
940 msgid "[{doc}`/reference/commands/load`] Added support for `YYYY-MM-DD` time format."
941 msgstr "[{doc}`/reference/commands/load`] `YYYY-MM-DD` 形式をサポートしました。"
942
943 msgid "[{ref}`release-12-1-0`]"
944 msgstr ""
945
946 msgid "[{doc}`/reference/commands/load`] Added support for slow log output of `load`."
947 msgstr "[{doc}`/reference/commands/load`] `load` のスローログの出力に対応しました。"
948
949 msgid "[{doc}`/reference/api`] Added new API `grn_is_reference_count_enable()`."
950 msgstr "[{doc}`/reference/api`] 新しいAPI `grn_is_reference_count_enable()` を追加しました。"
951
952 msgid "[{doc}`/reference/commands/status`] Added new items: `back_trace` and `/reference_count`."
953 msgstr "[{doc}`/reference/commands/status`] 新しい項目 `back_trace` と `reference_count` を追加しました。"
954
955 msgid "[{doc}`/install/almalinux`] Added support for AlmaLinux 9."
956 msgstr "[{doc}`/install/almalinux`] AlmaLinux 9 向けのパッケージをサポートしました。"
957
958 msgid "[{doc}`/reference/functions/escalate`] Added a document for the `escalate()` function."
959 msgstr "[{doc}`/reference/functions/escalate`] `escalate()` 関数のドキュメントを追加しました。"
960
961 msgid "[httpd] Updated bundled nginx to 1.23.2."
962 msgstr "[httpd] バンドルしているnginxのバージョンを1.23.2に更新しました。"
963
964 msgid "Suppressed logging a lot of same messages when no memory is available."
965 msgstr "メモリーが不足した際に、同じログが大量に出力されないように変更しました。"
966
967 msgid "[{ref}`release-12-0-8`]"
968 msgstr ""
969
970 msgid "Changed specification of the `escalate()` function (Experimental) to make it easier to use."
971 msgstr "`escalate()` 関数(実験的)の仕様を使いやすいように変更しました。"
972
973 msgid "[{doc}`/install/cmake`] Added a document about how to build Groonga with CMake."
974 msgstr "[{doc}`/install/cmake`] CMakeを使ってビルドする方法を追加しました。"
975
976 msgid "[{doc}`/install/others`] Added descriptions about how to enable/disable Apache Arrow support when building with GNU Autotools."
977 msgstr "[{doc}`/install/others`] GNU Autotoolsを使ってビルドする場合に、Apache Arrowの機能を有効化/無効化する方法について追加しました。"
978
979 msgid "[{doc}`/reference/commands/select`] Added a document about {ref}`select-drilldowns-label-table`."
980 msgstr "[{doc}`/reference/commands/select`] {ref}`select-drilldowns-label-table` のドキュメントを追加しました。"
981
982 msgid "[{doc}`/contribution/documentation/i18n`] Updated the translation procedure."
983 msgstr "[{doc}`/contribution/documentation/i18n`] 翻訳方法を更新しました。"
984
985 msgid "[{ref}`release-12-0-7`]"
986 msgstr ""
987
988 msgid "Added a new function `escalate()`. (experimental)"
989 msgstr "新しい関数 `escalate()` を追加しました。(実験的)"
990
991 msgid "[httpd] Updated bundled nginx to 1.23.1."
992 msgstr "[httpd] バンドルしているnginxのバージョンを1.23.1に更新しました。"
993
994 msgid "[{doc}`/reference/commands/select`] Add a document for the `--n_workers` option."
995 msgstr "[{doc}`/reference/commands/select`] `--n_workers` オプションのドキュメントを追加しました。"
996
997 msgid "[{ref}`release-12-0-6`]"
998 msgstr ""
999
1000 msgid "Added new Munin plugins for groonga-delta."
1001 msgstr "groonga-delta用の新しいMuninプラグインを追加しました。"
1002
1003 msgid "[{doc}`/reference/commands/column_copy`] Added support for weight vector."
1004 msgstr "[{doc}`/reference/commands/column_copy`] 重み付きベクターをサポートしました。"
1005
1006 msgid "[{doc}`/install/ubuntu`] Dropped support for Ubuntu 21.10 (Impish Indri)."
1007 msgstr "[{doc}`/install/ubuntu`] Ubuntu 21.10 (Impish Indri) のサポートをやめました。"
1008
1009 msgid "[{doc}`/install/debian`] Dropped Debian 10 (buster) support."
1010 msgstr "[{doc}`/install/debian`] Debian 10 (buster) のサポートをやめました。"
1011
1012 msgid "[{ref}`release-12-0-5`]"
1013 msgstr ""
1014
1015 msgid "[{doc}`/reference/commands/select`] Improved a little bit of performance for prefix search by search escalation."
1016 msgstr "[{doc}`/reference/commands/select`] 検索エスカレーションによる前方一致検索のパフォーマンスを少し改善しました。"
1017
1018 msgid "[{doc}`/reference/commands/select`] Added support for specifying a reference vector column with weight in `drilldowns[LABEL]._key`."
1019 msgstr "[{doc}`/reference/commands/select`] `drilldowns[LABEL]._key` に重み付き参照ベクターカラムを指定できるようになりました。"
1020
1021 msgid "[{doc}`/reference/commands/select`] Added support for doing drilldown with a reference vector with weight even if we use `query` or `filter`, or `post_filter`."
1022 msgstr "[{doc}`/reference/commands/select`] `query` や `filter` や `post_filter` を使っていても、ドリルダウンのキーに重み付き参照ベクターカラムを指定できるようになりました。"
1023
1024 msgid "[{ref}`release-12-0-4`]"
1025 msgstr ""
1026
1027 msgid "[{doc}`/install/ubuntu`] Added support for Ubuntu 22.04 (Jammy Jellyfish)."
1028 msgstr "[{doc}`/install/ubuntu`] Ubuntu 22.04 (Jammy Jellyfish)をサポートしました。"
1029
1030 msgid "We don't provide `groonga-benchmark`."
1031 msgstr "`groonga-benchmark` の提供をやめました。"
1032
1033 msgid "[{doc}`/reference/commands/status`] Added a new item `memory_map_size`."
1034 msgstr "[{doc}`/reference/commands/status`] 新しい項目 `memory_map_size` を追加しました。"
1035
1036 msgid "[{doc}`/reference/commands/logical_count`] Improved memory usage while `logical_count` executed."
1037 msgstr "[{doc}`/reference/commands/logical_count`] `logical_count` 実行中のメモリー使用量を改善しました。"
1038
1039 msgid "[{doc}`/reference/commands/dump`] Added support for `MISSING_IGNORE/MISSING_NIL`."
1040 msgstr "[{doc}`/reference/commands/dump`] `MISSING_IGNORE/MISSING_NIL` をサポートしました。"
1041
1042 msgid "[{doc}`/reference/functions/snippet`],[{doc}`/reference/functions/snippet_html`] Added support for text vector as input."
1043 msgstr "[{doc}`/reference/functions/snippet`],[{doc}`/reference/functions/snippet_html`] 入力としてベクターをサポートしました。"
1044
1045 msgid "[`vector_join`] Added a new function `vector_join()`."
1046 msgstr "[`vector_join`] 新しい関数 `vector_join()` を追加しました。"
1047
1048 msgid "[{doc}`/reference/indexing`] Ignore too large a token like online index construction."
1049 msgstr "[{doc}`/reference/indexing`] 動的インデックス構築のようにとても大きなトークンを無視するようにしました。"
1050
1051 msgid "[{ref}`release-12-0-2`]"
1052 msgstr ""
1053
1054 msgid "[{doc}`/reference/commands/logical_range_filter`] Added support for reducing reference immediately after processing a shard."
1055 msgstr "[{doc}`/reference/commands/logical_range_filter`] シャードを処理した直後に参照を減らすようにしました。"
1056
1057 msgid "We increased the stability of the feature of recovering on crashes."
1058 msgstr "クラッシュリカバリー機能の安定性が向上しました。"
1059
1060 msgid "Improved performance for mmap if anonymous mmap available."
1061 msgstr "無名マッピングが利用可能な時のmmapのパフォーマンスを向上しました。"
1062
1063 msgid "[{doc}`/reference/indexing`] Added support for the static index construction against the following types of columns."
1064 msgstr "[{doc}`/reference/indexing`] 以下のタイプのカラムで静的インデックス構築をサポートしました。"
1065
1066 msgid "[{doc}`/reference/commands/column_create`] Added new flags `MISSING_*` and `INVALID_*`."
1067 msgstr "[{doc}`/reference/commands/column_create`] 新しいフラグ `MISSING_*` と `INVALID_*` を追加しました。"
1068
1069 msgid "[{doc}`/reference/commands/dump`][{doc}`/reference/commands/column_list`] Added support for `MISSING_*` and `INVALID_*` flags."
1070 msgstr "[{doc}`/reference/commands/dump`][{doc}`/reference/commands/column_list`] `MISSING_*` と `INVALID_*` フラグをサポートしました。"
1071
1072 msgid "[{doc}`/reference/commands/schema`] Added support for `MISSING_*` and `INVALID_*` flags."
1073 msgstr "[{doc}`/reference/commands/schema`] `MISSING_*` と `INVALID_*` フラグをサポートしました。"
1074
1075 msgid "We provided the package of Amazon Linux 2."
1076 msgstr "Amazon Linux 2向けのパッケージを提供するようにしました。"
1077
1078 msgid "[Windows] Dropped support for building with Visual Studio 2017."
1079 msgstr "[Windows] Visual Studio 2017 でのビルドをやめました。"
1080
1081 msgid "[{doc}`/reference/commands/query_expand`] Added a support for text vector and index."
1082 msgstr "[{doc}`/reference/commands/query_expand`] 同義語グループにベクターを使えるようにしました。"
1083
1084 msgid "Added support for disabling a backtrace by the environment variable."
1085 msgstr "環境変数によって、バックトレースを無効にできるようにしました。"
1086
1087 msgid "[{doc}`/reference/commands/select`] Improved performance for `--slices`."
1088 msgstr "[{doc}`/reference/commands/select`] `--slices` のパフォーマンスを改善しました。"
1089
1090 msgid "[Windows] Added support for Visual Studio 2022."
1091 msgstr "[Windows] VisualStudio 2022 をサポートしました。"
1092
1093 msgid "[{doc}`/reference/commands/select`] Added support for specifing max intervals for each elements in near search."
1094 msgstr "[{doc}`/reference/commands/select`] 近傍検索でそれぞれの要素ごとの距離を指定できるようになりました。"
1095
1096 msgid "[{doc}`/reference/executables/groonga-server-http`] We could use `groonga-server-http` even if Groonga of RPM packages."
1097 msgstr "[{doc}`/reference/executables/groonga-server-http`] RPMパッケージのGroongaであっても、 `groonga-server-http` を使えるようにしました。"
1098
1099 msgid "[{doc}`/reference/functions/sub_filter`] Added a new option `pre_filter_threshold`."
1100 msgstr "[{doc}`/reference/functions/sub_filter`] 新しいオプション `pre_filter_threshold` を追加しました。"
1101
1102 msgid "[{doc}`/reference/normalizers/normalizer_nfkc130`] Added a new option `strip`"
1103 msgstr "[{doc}`/reference/normalizers/normalizer_nfkc130`] 新しいオプション `strip` を追加しました。"
1104
1105 msgid "[httpd] Updated bundled nginx to 1.21.6."
1106 msgstr "[httpd] バンドルしているnginxのバージョンを1.21.6に更新しました。"
1107
1108 msgid "[{doc}`/reference/commands/select`] Fix a bug displaying a wrong label in `drilldown` results when `command_version` is `3`."
1109 msgstr "[{doc}`/reference/commands/select`] `command_version` が `3` のとき、 `drilldown` の結果のラベルが不正になる問題を修正しました。"
1110
1111 msgid "[{doc}`/reference/normalizers/normalizer_table`] Fix a bug for Groonga to crush with specific definition setting in `NormalizerTable`."
1112 msgstr "[{doc}`/reference/normalizers/normalizer_table`] 特定の定義が `NormalizerTable` に存在する場合、Groongaがクラッシュすることがある問題を修正しました。"
1113
1114 msgid "[{doc}`/reference/commands/select`][{doc}`/reference/columns/vector`] Fixed a bug displaying integer in the results when a weight vector column specifies `WEIGHT FLOAT32`."
1115 msgstr "[{doc}`/reference/commands/select`][{doc}`/reference/columns/vector`] 重み付きベクターカラムで `WEIGHT_FLOAT32` を指定したとき、結果が整数で表示されていた問題を修正しました。"
1116
1117 msgid "[{doc}`/reference/commands/select`] Fixed a bug that Groonga could crash or return incorrect results when specifying {ref}`select-n-workers`."
1118 msgstr "[{doc}`/reference/commands/select`] {ref}`select-n-workers` を指定したとき、Groongaがクラッシュしたり、誤った結果を返すことがある問題を修正しました。"
1119
1120 msgid "Fixed a bug that Groonga could return incorrect results when we use {doc}`/reference/normalizers/normalizer_table` and it contains a non-idempotent (results can be changed when executed repeatedly) definition."
1121 msgstr "{doc}`/reference/normalizers/normalizer_table` で冪等でない(繰り返し実行すると結果が変わることがある)定義をした時に、Groongaが誤った結果を返すことがある問題を修正しました。"
1122
1123 msgid "Fixed a bug Groonga's response may be slow when we execute the `request_cancel` while executing a OR search."
1124 msgstr "OR検索実行中に `request_cancel` を実行した場合、Groongaの応答が遅くなることがある問題を修正しました。"
1125
1126 msgid "Fixed a bug that Groonga may crash when we execute drilldown in a parallel by `n_workers` option."
1127 msgstr "`n_workers` オプションを使ってドリルダウンを並行して実行したときにGroongaがクラッシュすることがある問題を修正しました。"
1128
1129 msgid "[{doc}`/reference/commands/select`] Fixed a bug that the syntax error occurred when we specify a very long expression in `--filter`."
1130 msgstr "[{doc}`/reference/commands/select`] `--filter` に非常に長い式を指定するとシンタックスエラーになる問題を修正しました。"
1131
1132 msgid "Fixed a bug Groonga's response may be slow when we execute `request_cancel` while executing a search."
1133 msgstr "検索実行中に `request_cancel` を実行した時Groongaの応答が遅くなることがある問題を修正しました。"
1134
1135 msgid "Fixed a bug that string list can't be casted to int32 vector."
1136 msgstr "文字列リストをint32のベクターにキャストできない問題を修正しました。"
1137
1138 msgid "Fixed a bug that Groonga Munin Plugins do not work on AlmaLinux 8 and CentOS 7."
1139 msgstr "GroongaのMuninプラグインがAlmaLinux 8 とCentOS 7上で動作しない問題を修正しました。"
1140
1141 msgid "Fixed a bug that we may be not able to add a key to a table of patricia trie."
1142 msgstr "パトリシアトライのテーブルにキーを追加できなくなることがある問題を修正しました。"